1 /* $NetBSD: if_stge.c,v 1.32 2005/12/11 12:22:49 christos Exp $ */
4 * Copyright (c) 2001 The NetBSD Foundation, Inc.
7 * This code is derived from software contributed to The NetBSD Foundation
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
33 * Device driver for the Sundance Tech. TC9021 10/100/1000
34 * Ethernet controller.
37 #include <sys/cdefs.h>
38 __FBSDID("$FreeBSD$");
40 #ifdef HAVE_KERNEL_OPTION_HEADERS
41 #include "opt_device_polling.h"
44 #include <sys/param.h>
45 #include <sys/systm.h>
46 #include <sys/endian.h>
48 #include <sys/malloc.h>
49 #include <sys/kernel.h>
50 #include <sys/module.h>
51 #include <sys/socket.h>
52 #include <sys/sockio.h>
53 #include <sys/sysctl.h>
54 #include <sys/taskqueue.h>
57 #include <net/ethernet.h>
59 #include <net/if_dl.h>
60 #include <net/if_media.h>
61 #include <net/if_types.h>
62 #include <net/if_vlan_var.h>
64 #include <machine/bus.h>
65 #include <machine/resource.h>
69 #include <dev/mii/mii.h>
70 #include <dev/mii/mii_bitbang.h>
71 #include <dev/mii/miivar.h>
73 #include <dev/pci/pcireg.h>
74 #include <dev/pci/pcivar.h>
76 #include <dev/stge/if_stgereg.h>
78 #define STGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
80 MODULE_DEPEND(stge, pci, 1, 1, 1);
81 MODULE_DEPEND(stge, ether, 1, 1, 1);
82 MODULE_DEPEND(stge, miibus, 1, 1, 1);
84 /* "device miibus" required. See GENERIC if you get errors here. */
85 #include "miibus_if.h"
88 * Devices supported by this driver.
90 static const struct stge_product {
91 uint16_t stge_vendorid;
92 uint16_t stge_deviceid;
93 const char *stge_name;
95 { VENDOR_SUNDANCETI, DEVICEID_SUNDANCETI_ST1023,
96 "Sundance ST-1023 Gigabit Ethernet" },
98 { VENDOR_SUNDANCETI, DEVICEID_SUNDANCETI_ST2021,
99 "Sundance ST-2021 Gigabit Ethernet" },
101 { VENDOR_TAMARACK, DEVICEID_TAMARACK_TC9021,
102 "Tamarack TC9021 Gigabit Ethernet" },
104 { VENDOR_TAMARACK, DEVICEID_TAMARACK_TC9021_ALT,
105 "Tamarack TC9021 Gigabit Ethernet" },
108 * The Sundance sample boards use the Sundance vendor ID,
109 * but the Tamarack product ID.
111 { VENDOR_SUNDANCETI, DEVICEID_TAMARACK_TC9021,
112 "Sundance TC9021 Gigabit Ethernet" },
114 { VENDOR_SUNDANCETI, DEVICEID_TAMARACK_TC9021_ALT,
115 "Sundance TC9021 Gigabit Ethernet" },
117 { VENDOR_DLINK, DEVICEID_DLINK_DL4000,
118 "D-Link DL-4000 Gigabit Ethernet" },
120 { VENDOR_ANTARES, DEVICEID_ANTARES_TC9021,
121 "Antares Gigabit Ethernet" }
124 static int stge_probe(device_t);
125 static int stge_attach(device_t);
126 static int stge_detach(device_t);
127 static int stge_shutdown(device_t);
128 static int stge_suspend(device_t);
129 static int stge_resume(device_t);
131 static int stge_encap(struct stge_softc *, struct mbuf **);
132 static void stge_start(struct ifnet *);
133 static void stge_start_locked(struct ifnet *);
134 static void stge_watchdog(struct stge_softc *);
135 static int stge_ioctl(struct ifnet *, u_long, caddr_t);
136 static void stge_init(void *);
137 static void stge_init_locked(struct stge_softc *);
138 static void stge_vlan_setup(struct stge_softc *);
139 static void stge_stop(struct stge_softc *);
140 static void stge_start_tx(struct stge_softc *);
141 static void stge_start_rx(struct stge_softc *);
142 static void stge_stop_tx(struct stge_softc *);
143 static void stge_stop_rx(struct stge_softc *);
145 static void stge_reset(struct stge_softc *, uint32_t);
146 static int stge_eeprom_wait(struct stge_softc *);
147 static void stge_read_eeprom(struct stge_softc *, int, uint16_t *);
148 static void stge_tick(void *);
149 static void stge_stats_update(struct stge_softc *);
150 static void stge_set_filter(struct stge_softc *);
151 static void stge_set_multi(struct stge_softc *);
153 static void stge_link_task(void *, int);
154 static void stge_intr(void *);
155 static __inline int stge_tx_error(struct stge_softc *);
156 static void stge_txeof(struct stge_softc *);
157 static int stge_rxeof(struct stge_softc *);
158 static __inline void stge_discard_rxbuf(struct stge_softc *, int);
159 static int stge_newbuf(struct stge_softc *, int);
160 #ifndef __NO_STRICT_ALIGNMENT
161 static __inline struct mbuf *stge_fixup_rx(struct stge_softc *, struct mbuf *);
164 static int stge_miibus_readreg(device_t, int, int);
165 static int stge_miibus_writereg(device_t, int, int, int);
166 static void stge_miibus_statchg(device_t);
167 static int stge_mediachange(struct ifnet *);
168 static void stge_mediastatus(struct ifnet *, struct ifmediareq *);
170 static void stge_dmamap_cb(void *, bus_dma_segment_t *, int, int);
171 static int stge_dma_alloc(struct stge_softc *);
172 static void stge_dma_free(struct stge_softc *);
173 static void stge_dma_wait(struct stge_softc *);
174 static void stge_init_tx_ring(struct stge_softc *);
175 static int stge_init_rx_ring(struct stge_softc *);
176 #ifdef DEVICE_POLLING
177 static int stge_poll(struct ifnet *, enum poll_cmd, int);
180 static void stge_setwol(struct stge_softc *);
181 static int sysctl_int_range(SYSCTL_HANDLER_ARGS, int, int);
182 static int sysctl_hw_stge_rxint_nframe(SYSCTL_HANDLER_ARGS);
183 static int sysctl_hw_stge_rxint_dmawait(SYSCTL_HANDLER_ARGS);
188 static uint32_t stge_mii_bitbang_read(device_t);
189 static void stge_mii_bitbang_write(device_t, uint32_t);
191 static const struct mii_bitbang_ops stge_mii_bitbang_ops = {
192 stge_mii_bitbang_read,
193 stge_mii_bitbang_write,
195 PC_MgmtData, /* MII_BIT_MDO */
196 PC_MgmtData, /* MII_BIT_MDI */
197 PC_MgmtClk, /* MII_BIT_MDC */
198 PC_MgmtDir, /* MII_BIT_DIR_HOST_PHY */
199 0, /* MII_BIT_DIR_PHY_HOST */
203 static device_method_t stge_methods[] = {
204 /* Device interface */
205 DEVMETHOD(device_probe, stge_probe),
206 DEVMETHOD(device_attach, stge_attach),
207 DEVMETHOD(device_detach, stge_detach),
208 DEVMETHOD(device_shutdown, stge_shutdown),
209 DEVMETHOD(device_suspend, stge_suspend),
210 DEVMETHOD(device_resume, stge_resume),
213 DEVMETHOD(miibus_readreg, stge_miibus_readreg),
214 DEVMETHOD(miibus_writereg, stge_miibus_writereg),
215 DEVMETHOD(miibus_statchg, stge_miibus_statchg),
220 static driver_t stge_driver = {
223 sizeof(struct stge_softc)
226 static devclass_t stge_devclass;
228 DRIVER_MODULE(stge, pci, stge_driver, stge_devclass, 0, 0);
229 DRIVER_MODULE(miibus, stge, miibus_driver, miibus_devclass, 0, 0);
231 static struct resource_spec stge_res_spec_io[] = {
232 { SYS_RES_IOPORT, PCIR_BAR(0), RF_ACTIVE },
233 { SYS_RES_IRQ, 0, RF_ACTIVE | RF_SHAREABLE },
237 static struct resource_spec stge_res_spec_mem[] = {
238 { SYS_RES_MEMORY, PCIR_BAR(1), RF_ACTIVE },
239 { SYS_RES_IRQ, 0, RF_ACTIVE | RF_SHAREABLE },
244 * stge_mii_bitbang_read: [mii bit-bang interface function]
246 * Read the MII serial port for the MII bit-bang module.
249 stge_mii_bitbang_read(device_t dev)
251 struct stge_softc *sc;
254 sc = device_get_softc(dev);
256 val = CSR_READ_1(sc, STGE_PhyCtrl);
257 CSR_BARRIER(sc, STGE_PhyCtrl, 1,
258 BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE);
263 * stge_mii_bitbang_write: [mii big-bang interface function]
265 * Write the MII serial port for the MII bit-bang module.
268 stge_mii_bitbang_write(device_t dev, uint32_t val)
270 struct stge_softc *sc;
272 sc = device_get_softc(dev);
274 CSR_WRITE_1(sc, STGE_PhyCtrl, val);
275 CSR_BARRIER(sc, STGE_PhyCtrl, 1,
276 BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE);
280 * sc_miibus_readreg: [mii interface function]
282 * Read a PHY register on the MII of the TC9021.
285 stge_miibus_readreg(device_t dev, int phy, int reg)
287 struct stge_softc *sc;
290 sc = device_get_softc(dev);
292 if (reg == STGE_PhyCtrl) {
293 /* XXX allow ip1000phy read STGE_PhyCtrl register. */
295 error = CSR_READ_1(sc, STGE_PhyCtrl);
301 val = mii_bitbang_readreg(dev, &stge_mii_bitbang_ops, phy, reg);
307 * stge_miibus_writereg: [mii interface function]
309 * Write a PHY register on the MII of the TC9021.
312 stge_miibus_writereg(device_t dev, int phy, int reg, int val)
314 struct stge_softc *sc;
316 sc = device_get_softc(dev);
319 mii_bitbang_writereg(dev, &stge_mii_bitbang_ops, phy, reg, val);
325 * stge_miibus_statchg: [mii interface function]
327 * Callback from MII layer when media changes.
330 stge_miibus_statchg(device_t dev)
332 struct stge_softc *sc;
334 sc = device_get_softc(dev);
335 taskqueue_enqueue(taskqueue_swi, &sc->sc_link_task);
339 * stge_mediastatus: [ifmedia interface function]
341 * Get the current interface media status.
344 stge_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
346 struct stge_softc *sc;
347 struct mii_data *mii;
350 mii = device_get_softc(sc->sc_miibus);
353 ifmr->ifm_status = mii->mii_media_status;
354 ifmr->ifm_active = mii->mii_media_active;
358 * stge_mediachange: [ifmedia interface function]
360 * Set hardware to newly-selected media.
363 stge_mediachange(struct ifnet *ifp)
365 struct stge_softc *sc;
366 struct mii_data *mii;
369 mii = device_get_softc(sc->sc_miibus);
376 stge_eeprom_wait(struct stge_softc *sc)
380 for (i = 0; i < STGE_TIMEOUT; i++) {
382 if ((CSR_READ_2(sc, STGE_EepromCtrl) & EC_EepromBusy) == 0)
391 * Read data from the serial EEPROM.
394 stge_read_eeprom(struct stge_softc *sc, int offset, uint16_t *data)
397 if (stge_eeprom_wait(sc))
398 device_printf(sc->sc_dev, "EEPROM failed to come ready\n");
400 CSR_WRITE_2(sc, STGE_EepromCtrl,
401 EC_EepromAddress(offset) | EC_EepromOpcode(EC_OP_RR));
402 if (stge_eeprom_wait(sc))
403 device_printf(sc->sc_dev, "EEPROM read timed out\n");
404 *data = CSR_READ_2(sc, STGE_EepromData);
409 stge_probe(device_t dev)
411 const struct stge_product *sp;
413 uint16_t vendor, devid;
415 vendor = pci_get_vendor(dev);
416 devid = pci_get_device(dev);
418 for (i = 0; i < sizeof(stge_products)/sizeof(stge_products[0]);
420 if (vendor == sp->stge_vendorid &&
421 devid == sp->stge_deviceid) {
422 device_set_desc(dev, sp->stge_name);
423 return (BUS_PROBE_DEFAULT);
431 stge_attach(device_t dev)
433 struct stge_softc *sc;
435 uint8_t enaddr[ETHER_ADDR_LEN];
441 sc = device_get_softc(dev);
444 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
446 mtx_init(&sc->sc_mii_mtx, "stge_mii_mutex", NULL, MTX_DEF);
447 callout_init_mtx(&sc->sc_tick_ch, &sc->sc_mtx, 0);
448 TASK_INIT(&sc->sc_link_task, 0, stge_link_task, sc);
453 pci_enable_busmaster(dev);
454 cmd = pci_read_config(dev, PCIR_COMMAND, 2);
455 val = pci_read_config(dev, PCIR_BAR(1), 4);
456 if ((val & 0x01) != 0)
457 sc->sc_spec = stge_res_spec_mem;
459 val = pci_read_config(dev, PCIR_BAR(0), 4);
460 if ((val & 0x01) == 0) {
461 device_printf(sc->sc_dev, "couldn't locate IO BAR\n");
465 sc->sc_spec = stge_res_spec_io;
467 error = bus_alloc_resources(dev, sc->sc_spec, sc->sc_res);
469 device_printf(dev, "couldn't allocate %s resources\n",
470 sc->sc_spec == stge_res_spec_mem ? "memory" : "I/O");
473 sc->sc_rev = pci_get_revid(dev);
475 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
476 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
477 "rxint_nframe", CTLTYPE_INT|CTLFLAG_RW, &sc->sc_rxint_nframe, 0,
478 sysctl_hw_stge_rxint_nframe, "I", "stge rx interrupt nframe");
480 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
481 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
482 "rxint_dmawait", CTLTYPE_INT|CTLFLAG_RW, &sc->sc_rxint_dmawait, 0,
483 sysctl_hw_stge_rxint_dmawait, "I", "stge rx interrupt dmawait");
485 /* Pull in device tunables. */
486 sc->sc_rxint_nframe = STGE_RXINT_NFRAME_DEFAULT;
487 error = resource_int_value(device_get_name(dev), device_get_unit(dev),
488 "rxint_nframe", &sc->sc_rxint_nframe);
490 if (sc->sc_rxint_nframe < STGE_RXINT_NFRAME_MIN ||
491 sc->sc_rxint_nframe > STGE_RXINT_NFRAME_MAX) {
492 device_printf(dev, "rxint_nframe value out of range; "
493 "using default: %d\n", STGE_RXINT_NFRAME_DEFAULT);
494 sc->sc_rxint_nframe = STGE_RXINT_NFRAME_DEFAULT;
498 sc->sc_rxint_dmawait = STGE_RXINT_DMAWAIT_DEFAULT;
499 error = resource_int_value(device_get_name(dev), device_get_unit(dev),
500 "rxint_dmawait", &sc->sc_rxint_dmawait);
502 if (sc->sc_rxint_dmawait < STGE_RXINT_DMAWAIT_MIN ||
503 sc->sc_rxint_dmawait > STGE_RXINT_DMAWAIT_MAX) {
504 device_printf(dev, "rxint_dmawait value out of range; "
505 "using default: %d\n", STGE_RXINT_DMAWAIT_DEFAULT);
506 sc->sc_rxint_dmawait = STGE_RXINT_DMAWAIT_DEFAULT;
510 if ((error = stge_dma_alloc(sc) != 0))
514 * Determine if we're copper or fiber. It affects how we
517 if (CSR_READ_4(sc, STGE_AsicCtrl) & AC_PhyMedia)
522 /* Load LED configuration from EEPROM. */
523 stge_read_eeprom(sc, STGE_EEPROM_LEDMode, &sc->sc_led);
526 * Reset the chip to a known state.
529 stge_reset(sc, STGE_RESET_FULL);
533 * Reading the station address from the EEPROM doesn't seem
534 * to work, at least on my sample boards. Instead, since
535 * the reset sequence does AutoInit, read it from the station
536 * address registers. For Sundance 1023 you can only read it
539 if (pci_get_device(dev) != DEVICEID_SUNDANCETI_ST1023) {
542 v = CSR_READ_2(sc, STGE_StationAddress0);
543 enaddr[0] = v & 0xff;
545 v = CSR_READ_2(sc, STGE_StationAddress1);
546 enaddr[2] = v & 0xff;
548 v = CSR_READ_2(sc, STGE_StationAddress2);
549 enaddr[4] = v & 0xff;
553 uint16_t myaddr[ETHER_ADDR_LEN / 2];
554 for (i = 0; i <ETHER_ADDR_LEN / 2; i++) {
555 stge_read_eeprom(sc, STGE_EEPROM_StationAddress0 + i,
557 myaddr[i] = le16toh(myaddr[i]);
559 bcopy(myaddr, enaddr, sizeof(enaddr));
563 ifp = sc->sc_ifp = if_alloc(IFT_ETHER);
565 device_printf(sc->sc_dev, "failed to if_alloc()\n");
571 if_initname(ifp, device_get_name(dev), device_get_unit(dev));
572 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
573 ifp->if_ioctl = stge_ioctl;
574 ifp->if_start = stge_start;
575 ifp->if_init = stge_init;
576 ifp->if_mtu = ETHERMTU;
577 ifp->if_snd.ifq_drv_maxlen = STGE_TX_RING_CNT - 1;
578 IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen);
579 IFQ_SET_READY(&ifp->if_snd);
580 /* Revision B3 and earlier chips have checksum bug. */
581 if (sc->sc_rev >= 0x0c) {
582 ifp->if_hwassist = STGE_CSUM_FEATURES;
583 ifp->if_capabilities = IFCAP_HWCSUM;
585 ifp->if_hwassist = 0;
586 ifp->if_capabilities = 0;
588 ifp->if_capabilities |= IFCAP_WOL_MAGIC;
589 ifp->if_capenable = ifp->if_capabilities;
592 * Read some important bits from the PhyCtrl register.
594 sc->sc_PhyCtrl = CSR_READ_1(sc, STGE_PhyCtrl) &
595 (PC_PhyDuplexPolarity | PC_PhyLnkPolarity);
597 /* Set up MII bus. */
598 flags = MIIF_DOPAUSE;
599 if (sc->sc_rev >= 0x40 && sc->sc_rev <= 0x4e)
600 flags |= MIIF_MACPRIV0;
601 error = mii_attach(sc->sc_dev, &sc->sc_miibus, ifp, stge_mediachange,
602 stge_mediastatus, BMSR_DEFCAPMASK, MII_PHY_ANY, MII_OFFSET_ANY,
605 device_printf(sc->sc_dev, "attaching PHYs failed\n");
609 ether_ifattach(ifp, enaddr);
611 /* VLAN capability setup */
612 ifp->if_capabilities |= IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING;
613 if (sc->sc_rev >= 0x0c)
614 ifp->if_capabilities |= IFCAP_VLAN_HWCSUM;
615 ifp->if_capenable = ifp->if_capabilities;
616 #ifdef DEVICE_POLLING
617 ifp->if_capabilities |= IFCAP_POLLING;
620 * Tell the upper layer(s) we support long frames.
621 * Must appear after the call to ether_ifattach() because
622 * ether_ifattach() sets ifi_hdrlen to the default value.
624 ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
627 * The manual recommends disabling early transmit, so we
628 * do. It's disabled anyway, if using IP checksumming,
629 * since the entire packet must be in the FIFO in order
630 * for the chip to perform the checksum.
632 sc->sc_txthresh = 0x0fff;
635 * Disable MWI if the PCI layer tells us to.
638 if ((cmd & PCIM_CMD_MWRICEN) == 0)
639 sc->sc_DMACtrl |= DMAC_MWIDisable;
644 error = bus_setup_intr(dev, sc->sc_res[1], INTR_TYPE_NET | INTR_MPSAFE,
645 NULL, stge_intr, sc, &sc->sc_ih);
648 device_printf(sc->sc_dev, "couldn't set up IRQ\n");
661 stge_detach(device_t dev)
663 struct stge_softc *sc;
666 sc = device_get_softc(dev);
669 #ifdef DEVICE_POLLING
670 if (ifp && ifp->if_capenable & IFCAP_POLLING)
671 ether_poll_deregister(ifp);
673 if (device_is_attached(dev)) {
679 callout_drain(&sc->sc_tick_ch);
680 taskqueue_drain(taskqueue_swi, &sc->sc_link_task);
684 if (sc->sc_miibus != NULL) {
685 device_delete_child(dev, sc->sc_miibus);
686 sc->sc_miibus = NULL;
688 bus_generic_detach(dev);
697 bus_teardown_intr(dev, sc->sc_res[1], sc->sc_ih);
700 bus_release_resources(dev, sc->sc_spec, sc->sc_res);
702 mtx_destroy(&sc->sc_mii_mtx);
703 mtx_destroy(&sc->sc_mtx);
708 struct stge_dmamap_arg {
709 bus_addr_t stge_busaddr;
713 stge_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
715 struct stge_dmamap_arg *ctx;
720 ctx = (struct stge_dmamap_arg *)arg;
721 ctx->stge_busaddr = segs[0].ds_addr;
725 stge_dma_alloc(struct stge_softc *sc)
727 struct stge_dmamap_arg ctx;
728 struct stge_txdesc *txd;
729 struct stge_rxdesc *rxd;
732 /* create parent tag. */
733 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev),/* parent */
734 1, 0, /* algnmnt, boundary */
735 STGE_DMA_MAXADDR, /* lowaddr */
736 BUS_SPACE_MAXADDR, /* highaddr */
737 NULL, NULL, /* filter, filterarg */
738 BUS_SPACE_MAXSIZE_32BIT, /* maxsize */
740 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
742 NULL, NULL, /* lockfunc, lockarg */
743 &sc->sc_cdata.stge_parent_tag);
745 device_printf(sc->sc_dev, "failed to create parent DMA tag\n");
748 /* create tag for Tx ring. */
749 error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
750 STGE_RING_ALIGN, 0, /* algnmnt, boundary */
751 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
752 BUS_SPACE_MAXADDR, /* highaddr */
753 NULL, NULL, /* filter, filterarg */
754 STGE_TX_RING_SZ, /* maxsize */
756 STGE_TX_RING_SZ, /* maxsegsize */
758 NULL, NULL, /* lockfunc, lockarg */
759 &sc->sc_cdata.stge_tx_ring_tag);
761 device_printf(sc->sc_dev,
762 "failed to allocate Tx ring DMA tag\n");
766 /* create tag for Rx ring. */
767 error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
768 STGE_RING_ALIGN, 0, /* algnmnt, boundary */
769 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
770 BUS_SPACE_MAXADDR, /* highaddr */
771 NULL, NULL, /* filter, filterarg */
772 STGE_RX_RING_SZ, /* maxsize */
774 STGE_RX_RING_SZ, /* maxsegsize */
776 NULL, NULL, /* lockfunc, lockarg */
777 &sc->sc_cdata.stge_rx_ring_tag);
779 device_printf(sc->sc_dev,
780 "failed to allocate Rx ring DMA tag\n");
784 /* create tag for Tx buffers. */
785 error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
786 1, 0, /* algnmnt, boundary */
787 BUS_SPACE_MAXADDR, /* lowaddr */
788 BUS_SPACE_MAXADDR, /* highaddr */
789 NULL, NULL, /* filter, filterarg */
790 MCLBYTES * STGE_MAXTXSEGS, /* maxsize */
791 STGE_MAXTXSEGS, /* nsegments */
792 MCLBYTES, /* maxsegsize */
794 NULL, NULL, /* lockfunc, lockarg */
795 &sc->sc_cdata.stge_tx_tag);
797 device_printf(sc->sc_dev, "failed to allocate Tx DMA tag\n");
801 /* create tag for Rx buffers. */
802 error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
803 1, 0, /* algnmnt, boundary */
804 BUS_SPACE_MAXADDR, /* lowaddr */
805 BUS_SPACE_MAXADDR, /* highaddr */
806 NULL, NULL, /* filter, filterarg */
807 MCLBYTES, /* maxsize */
809 MCLBYTES, /* maxsegsize */
811 NULL, NULL, /* lockfunc, lockarg */
812 &sc->sc_cdata.stge_rx_tag);
814 device_printf(sc->sc_dev, "failed to allocate Rx DMA tag\n");
818 /* allocate DMA'able memory and load the DMA map for Tx ring. */
819 error = bus_dmamem_alloc(sc->sc_cdata.stge_tx_ring_tag,
820 (void **)&sc->sc_rdata.stge_tx_ring, BUS_DMA_NOWAIT |
821 BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->sc_cdata.stge_tx_ring_map);
823 device_printf(sc->sc_dev,
824 "failed to allocate DMA'able memory for Tx ring\n");
828 ctx.stge_busaddr = 0;
829 error = bus_dmamap_load(sc->sc_cdata.stge_tx_ring_tag,
830 sc->sc_cdata.stge_tx_ring_map, sc->sc_rdata.stge_tx_ring,
831 STGE_TX_RING_SZ, stge_dmamap_cb, &ctx, BUS_DMA_NOWAIT);
832 if (error != 0 || ctx.stge_busaddr == 0) {
833 device_printf(sc->sc_dev,
834 "failed to load DMA'able memory for Tx ring\n");
837 sc->sc_rdata.stge_tx_ring_paddr = ctx.stge_busaddr;
839 /* allocate DMA'able memory and load the DMA map for Rx ring. */
840 error = bus_dmamem_alloc(sc->sc_cdata.stge_rx_ring_tag,
841 (void **)&sc->sc_rdata.stge_rx_ring, BUS_DMA_NOWAIT |
842 BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->sc_cdata.stge_rx_ring_map);
844 device_printf(sc->sc_dev,
845 "failed to allocate DMA'able memory for Rx ring\n");
849 ctx.stge_busaddr = 0;
850 error = bus_dmamap_load(sc->sc_cdata.stge_rx_ring_tag,
851 sc->sc_cdata.stge_rx_ring_map, sc->sc_rdata.stge_rx_ring,
852 STGE_RX_RING_SZ, stge_dmamap_cb, &ctx, BUS_DMA_NOWAIT);
853 if (error != 0 || ctx.stge_busaddr == 0) {
854 device_printf(sc->sc_dev,
855 "failed to load DMA'able memory for Rx ring\n");
858 sc->sc_rdata.stge_rx_ring_paddr = ctx.stge_busaddr;
860 /* create DMA maps for Tx buffers. */
861 for (i = 0; i < STGE_TX_RING_CNT; i++) {
862 txd = &sc->sc_cdata.stge_txdesc[i];
865 error = bus_dmamap_create(sc->sc_cdata.stge_tx_tag, 0,
868 device_printf(sc->sc_dev,
869 "failed to create Tx dmamap\n");
873 /* create DMA maps for Rx buffers. */
874 if ((error = bus_dmamap_create(sc->sc_cdata.stge_rx_tag, 0,
875 &sc->sc_cdata.stge_rx_sparemap)) != 0) {
876 device_printf(sc->sc_dev, "failed to create spare Rx dmamap\n");
879 for (i = 0; i < STGE_RX_RING_CNT; i++) {
880 rxd = &sc->sc_cdata.stge_rxdesc[i];
883 error = bus_dmamap_create(sc->sc_cdata.stge_rx_tag, 0,
886 device_printf(sc->sc_dev,
887 "failed to create Rx dmamap\n");
897 stge_dma_free(struct stge_softc *sc)
899 struct stge_txdesc *txd;
900 struct stge_rxdesc *rxd;
904 if (sc->sc_cdata.stge_tx_ring_tag) {
905 if (sc->sc_cdata.stge_tx_ring_map)
906 bus_dmamap_unload(sc->sc_cdata.stge_tx_ring_tag,
907 sc->sc_cdata.stge_tx_ring_map);
908 if (sc->sc_cdata.stge_tx_ring_map &&
909 sc->sc_rdata.stge_tx_ring)
910 bus_dmamem_free(sc->sc_cdata.stge_tx_ring_tag,
911 sc->sc_rdata.stge_tx_ring,
912 sc->sc_cdata.stge_tx_ring_map);
913 sc->sc_rdata.stge_tx_ring = NULL;
914 sc->sc_cdata.stge_tx_ring_map = 0;
915 bus_dma_tag_destroy(sc->sc_cdata.stge_tx_ring_tag);
916 sc->sc_cdata.stge_tx_ring_tag = NULL;
919 if (sc->sc_cdata.stge_rx_ring_tag) {
920 if (sc->sc_cdata.stge_rx_ring_map)
921 bus_dmamap_unload(sc->sc_cdata.stge_rx_ring_tag,
922 sc->sc_cdata.stge_rx_ring_map);
923 if (sc->sc_cdata.stge_rx_ring_map &&
924 sc->sc_rdata.stge_rx_ring)
925 bus_dmamem_free(sc->sc_cdata.stge_rx_ring_tag,
926 sc->sc_rdata.stge_rx_ring,
927 sc->sc_cdata.stge_rx_ring_map);
928 sc->sc_rdata.stge_rx_ring = NULL;
929 sc->sc_cdata.stge_rx_ring_map = 0;
930 bus_dma_tag_destroy(sc->sc_cdata.stge_rx_ring_tag);
931 sc->sc_cdata.stge_rx_ring_tag = NULL;
934 if (sc->sc_cdata.stge_tx_tag) {
935 for (i = 0; i < STGE_TX_RING_CNT; i++) {
936 txd = &sc->sc_cdata.stge_txdesc[i];
937 if (txd->tx_dmamap) {
938 bus_dmamap_destroy(sc->sc_cdata.stge_tx_tag,
943 bus_dma_tag_destroy(sc->sc_cdata.stge_tx_tag);
944 sc->sc_cdata.stge_tx_tag = NULL;
947 if (sc->sc_cdata.stge_rx_tag) {
948 for (i = 0; i < STGE_RX_RING_CNT; i++) {
949 rxd = &sc->sc_cdata.stge_rxdesc[i];
950 if (rxd->rx_dmamap) {
951 bus_dmamap_destroy(sc->sc_cdata.stge_rx_tag,
956 if (sc->sc_cdata.stge_rx_sparemap) {
957 bus_dmamap_destroy(sc->sc_cdata.stge_rx_tag,
958 sc->sc_cdata.stge_rx_sparemap);
959 sc->sc_cdata.stge_rx_sparemap = 0;
961 bus_dma_tag_destroy(sc->sc_cdata.stge_rx_tag);
962 sc->sc_cdata.stge_rx_tag = NULL;
965 if (sc->sc_cdata.stge_parent_tag) {
966 bus_dma_tag_destroy(sc->sc_cdata.stge_parent_tag);
967 sc->sc_cdata.stge_parent_tag = NULL;
974 * Make sure the interface is stopped at reboot time.
977 stge_shutdown(device_t dev)
980 return (stge_suspend(dev));
984 stge_setwol(struct stge_softc *sc)
989 STGE_LOCK_ASSERT(sc);
992 v = CSR_READ_1(sc, STGE_WakeEvent);
993 /* Disable all WOL bits. */
994 v &= ~(WE_WakePktEnable | WE_MagicPktEnable | WE_LinkEventEnable |
996 if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0)
997 v |= WE_MagicPktEnable | WE_WakeOnLanEnable;
998 CSR_WRITE_1(sc, STGE_WakeEvent, v);
999 /* Reset Tx and prevent transmission. */
1000 CSR_WRITE_4(sc, STGE_AsicCtrl,
1001 CSR_READ_4(sc, STGE_AsicCtrl) | AC_TxReset);
1003 * TC9021 automatically reset link speed to 100Mbps when it's put
1004 * into sleep so there is no need to try to resetting link speed.
1009 stge_suspend(device_t dev)
1011 struct stge_softc *sc;
1013 sc = device_get_softc(dev);
1017 sc->sc_suspended = 1;
1025 stge_resume(device_t dev)
1027 struct stge_softc *sc;
1031 sc = device_get_softc(dev);
1035 * Clear WOL bits, so special frames wouldn't interfere
1036 * normal Rx operation anymore.
1038 v = CSR_READ_1(sc, STGE_WakeEvent);
1039 v &= ~(WE_WakePktEnable | WE_MagicPktEnable | WE_LinkEventEnable |
1040 WE_WakeOnLanEnable);
1041 CSR_WRITE_1(sc, STGE_WakeEvent, v);
1043 if (ifp->if_flags & IFF_UP)
1044 stge_init_locked(sc);
1046 sc->sc_suspended = 0;
1053 stge_dma_wait(struct stge_softc *sc)
1057 for (i = 0; i < STGE_TIMEOUT; i++) {
1059 if ((CSR_READ_4(sc, STGE_DMACtrl) & DMAC_TxDMAInProg) == 0)
1063 if (i == STGE_TIMEOUT)
1064 device_printf(sc->sc_dev, "DMA wait timed out\n");
1068 stge_encap(struct stge_softc *sc, struct mbuf **m_head)
1070 struct stge_txdesc *txd;
1071 struct stge_tfd *tfd;
1073 bus_dma_segment_t txsegs[STGE_MAXTXSEGS];
1074 int error, i, nsegs, si;
1075 uint64_t csum_flags, tfc;
1077 STGE_LOCK_ASSERT(sc);
1079 if ((txd = STAILQ_FIRST(&sc->sc_cdata.stge_txfreeq)) == NULL)
1082 error = bus_dmamap_load_mbuf_sg(sc->sc_cdata.stge_tx_tag,
1083 txd->tx_dmamap, *m_head, txsegs, &nsegs, 0);
1084 if (error == EFBIG) {
1085 m = m_collapse(*m_head, M_NOWAIT, STGE_MAXTXSEGS);
1092 error = bus_dmamap_load_mbuf_sg(sc->sc_cdata.stge_tx_tag,
1093 txd->tx_dmamap, *m_head, txsegs, &nsegs, 0);
1099 } else if (error != 0)
1109 if ((m->m_pkthdr.csum_flags & STGE_CSUM_FEATURES) != 0) {
1110 if (m->m_pkthdr.csum_flags & CSUM_IP)
1111 csum_flags |= TFD_IPChecksumEnable;
1112 if (m->m_pkthdr.csum_flags & CSUM_TCP)
1113 csum_flags |= TFD_TCPChecksumEnable;
1114 else if (m->m_pkthdr.csum_flags & CSUM_UDP)
1115 csum_flags |= TFD_UDPChecksumEnable;
1118 si = sc->sc_cdata.stge_tx_prod;
1119 tfd = &sc->sc_rdata.stge_tx_ring[si];
1120 for (i = 0; i < nsegs; i++)
1121 tfd->tfd_frags[i].frag_word0 =
1122 htole64(FRAG_ADDR(txsegs[i].ds_addr) |
1123 FRAG_LEN(txsegs[i].ds_len));
1124 sc->sc_cdata.stge_tx_cnt++;
1126 tfc = TFD_FrameId(si) | TFD_WordAlign(TFD_WordAlign_disable) |
1127 TFD_FragCount(nsegs) | csum_flags;
1128 if (sc->sc_cdata.stge_tx_cnt >= STGE_TX_HIWAT)
1129 tfc |= TFD_TxDMAIndicate;
1131 /* Update producer index. */
1132 sc->sc_cdata.stge_tx_prod = (si + 1) % STGE_TX_RING_CNT;
1134 /* Check if we have a VLAN tag to insert. */
1135 if (m->m_flags & M_VLANTAG)
1136 tfc |= (TFD_VLANTagInsert | TFD_VID(m->m_pkthdr.ether_vtag));
1137 tfd->tfd_control = htole64(tfc);
1139 /* Update Tx Queue. */
1140 STAILQ_REMOVE_HEAD(&sc->sc_cdata.stge_txfreeq, tx_q);
1141 STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txbusyq, txd, tx_q);
1144 /* Sync descriptors. */
1145 bus_dmamap_sync(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap,
1146 BUS_DMASYNC_PREWRITE);
1147 bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag,
1148 sc->sc_cdata.stge_tx_ring_map,
1149 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
1155 * stge_start: [ifnet interface function]
1157 * Start packet transmission on the interface.
1160 stge_start(struct ifnet *ifp)
1162 struct stge_softc *sc;
1166 stge_start_locked(ifp);
1171 stge_start_locked(struct ifnet *ifp)
1173 struct stge_softc *sc;
1174 struct mbuf *m_head;
1179 STGE_LOCK_ASSERT(sc);
1181 if ((ifp->if_drv_flags & (IFF_DRV_RUNNING|IFF_DRV_OACTIVE)) !=
1182 IFF_DRV_RUNNING || sc->sc_link == 0)
1185 for (enq = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd); ) {
1186 if (sc->sc_cdata.stge_tx_cnt >= STGE_TX_HIWAT) {
1187 ifp->if_drv_flags |= IFF_DRV_OACTIVE;
1191 IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
1195 * Pack the data into the transmit ring. If we
1196 * don't have room, set the OACTIVE flag and wait
1197 * for the NIC to drain the ring.
1199 if (stge_encap(sc, &m_head)) {
1202 IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
1203 ifp->if_drv_flags |= IFF_DRV_OACTIVE;
1209 * If there's a BPF listener, bounce a copy of this frame
1212 ETHER_BPF_MTAP(ifp, m_head);
1217 CSR_WRITE_4(sc, STGE_DMACtrl, DMAC_TxDMAPollNow);
1219 /* Set a timeout in case the chip goes out to lunch. */
1220 sc->sc_watchdog_timer = 5;
1227 * Watchdog timer handler.
1230 stge_watchdog(struct stge_softc *sc)
1234 STGE_LOCK_ASSERT(sc);
1236 if (sc->sc_watchdog_timer == 0 || --sc->sc_watchdog_timer)
1240 if_printf(sc->sc_ifp, "device timeout\n");
1242 ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
1243 stge_init_locked(sc);
1244 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
1245 stge_start_locked(ifp);
1249 * stge_ioctl: [ifnet interface function]
1251 * Handle control requests from the operator.
1254 stge_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
1256 struct stge_softc *sc;
1258 struct mii_data *mii;
1262 ifr = (struct ifreq *)data;
1266 if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > STGE_JUMBO_MTU)
1268 else if (ifp->if_mtu != ifr->ifr_mtu) {
1269 ifp->if_mtu = ifr->ifr_mtu;
1271 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
1272 ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
1273 stge_init_locked(sc);
1280 if ((ifp->if_flags & IFF_UP) != 0) {
1281 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
1282 if (((ifp->if_flags ^ sc->sc_if_flags)
1283 & IFF_PROMISC) != 0)
1284 stge_set_filter(sc);
1286 if (sc->sc_detach == 0)
1287 stge_init_locked(sc);
1290 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
1293 sc->sc_if_flags = ifp->if_flags;
1299 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
1305 mii = device_get_softc(sc->sc_miibus);
1306 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd);
1309 mask = ifr->ifr_reqcap ^ ifp->if_capenable;
1310 #ifdef DEVICE_POLLING
1311 if ((mask & IFCAP_POLLING) != 0) {
1312 if ((ifr->ifr_reqcap & IFCAP_POLLING) != 0) {
1313 error = ether_poll_register(stge_poll, ifp);
1317 CSR_WRITE_2(sc, STGE_IntEnable, 0);
1318 ifp->if_capenable |= IFCAP_POLLING;
1321 error = ether_poll_deregister(ifp);
1325 CSR_WRITE_2(sc, STGE_IntEnable,
1327 ifp->if_capenable &= ~IFCAP_POLLING;
1332 if ((mask & IFCAP_HWCSUM) != 0) {
1333 ifp->if_capenable ^= IFCAP_HWCSUM;
1334 if ((IFCAP_HWCSUM & ifp->if_capenable) != 0 &&
1335 (IFCAP_HWCSUM & ifp->if_capabilities) != 0)
1336 ifp->if_hwassist = STGE_CSUM_FEATURES;
1338 ifp->if_hwassist = 0;
1340 if ((mask & IFCAP_WOL) != 0 &&
1341 (ifp->if_capabilities & IFCAP_WOL) != 0) {
1342 if ((mask & IFCAP_WOL_MAGIC) != 0)
1343 ifp->if_capenable ^= IFCAP_WOL_MAGIC;
1345 if ((mask & IFCAP_VLAN_HWTAGGING) != 0) {
1346 ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
1347 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
1349 stge_vlan_setup(sc);
1353 VLAN_CAPABILITIES(ifp);
1356 error = ether_ioctl(ifp, cmd, data);
1364 stge_link_task(void *arg, int pending)
1366 struct stge_softc *sc;
1367 struct mii_data *mii;
1371 sc = (struct stge_softc *)arg;
1374 mii = device_get_softc(sc->sc_miibus);
1375 if (mii->mii_media_status & IFM_ACTIVE) {
1376 if (IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE)
1382 if (((mii->mii_media_active & IFM_GMASK) & IFM_FDX) != 0)
1383 sc->sc_MACCtrl |= MC_DuplexSelect;
1384 if (((mii->mii_media_active & IFM_GMASK) & IFM_ETH_RXPAUSE) != 0)
1385 sc->sc_MACCtrl |= MC_RxFlowControlEnable;
1386 if (((mii->mii_media_active & IFM_GMASK) & IFM_ETH_TXPAUSE) != 0)
1387 sc->sc_MACCtrl |= MC_TxFlowControlEnable;
1389 * Update STGE_MACCtrl register depending on link status.
1390 * (duplex, flow control etc)
1392 v = ac = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
1393 v &= ~(MC_DuplexSelect|MC_RxFlowControlEnable|MC_TxFlowControlEnable);
1394 v |= sc->sc_MACCtrl;
1395 CSR_WRITE_4(sc, STGE_MACCtrl, v);
1396 if (((ac ^ sc->sc_MACCtrl) & MC_DuplexSelect) != 0) {
1397 /* Duplex setting changed, reset Tx/Rx functions. */
1398 ac = CSR_READ_4(sc, STGE_AsicCtrl);
1399 ac |= AC_TxReset | AC_RxReset;
1400 CSR_WRITE_4(sc, STGE_AsicCtrl, ac);
1401 for (i = 0; i < STGE_TIMEOUT; i++) {
1403 if ((CSR_READ_4(sc, STGE_AsicCtrl) & AC_ResetBusy) == 0)
1406 if (i == STGE_TIMEOUT)
1407 device_printf(sc->sc_dev, "reset failed to complete\n");
1413 stge_tx_error(struct stge_softc *sc)
1419 txstat = CSR_READ_4(sc, STGE_TxStatus);
1420 if ((txstat & TS_TxComplete) == 0)
1423 if ((txstat & TS_TxUnderrun) != 0) {
1426 * There should be a more better way to recover
1427 * from Tx underrun instead of a full reset.
1429 if (sc->sc_nerr++ < STGE_MAXERR)
1430 device_printf(sc->sc_dev, "Tx underrun, "
1432 if (sc->sc_nerr == STGE_MAXERR)
1433 device_printf(sc->sc_dev, "too many errors; "
1434 "not reporting any more\n");
1438 /* Maximum/Late collisions, Re-enable Tx MAC. */
1439 if ((txstat & (TS_MaxCollisions|TS_LateCollision)) != 0)
1440 CSR_WRITE_4(sc, STGE_MACCtrl,
1441 (CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK) |
1451 * Interrupt service routine.
1454 stge_intr(void *arg)
1456 struct stge_softc *sc;
1461 sc = (struct stge_softc *)arg;
1466 #ifdef DEVICE_POLLING
1467 if ((ifp->if_capenable & IFCAP_POLLING) != 0)
1470 status = CSR_READ_2(sc, STGE_IntStatus);
1471 if (sc->sc_suspended || (status & IS_InterruptStatus) == 0)
1474 /* Disable interrupts. */
1475 for (reinit = 0;;) {
1476 status = CSR_READ_2(sc, STGE_IntStatusAck);
1477 status &= sc->sc_IntEnable;
1480 /* Host interface errors. */
1481 if ((status & IS_HostError) != 0) {
1482 device_printf(sc->sc_dev,
1483 "Host interface error, resetting...\n");
1488 /* Receive interrupts. */
1489 if ((status & IS_RxDMAComplete) != 0) {
1491 if ((status & IS_RFDListEnd) != 0)
1492 CSR_WRITE_4(sc, STGE_DMACtrl,
1496 /* Transmit interrupts. */
1497 if ((status & (IS_TxDMAComplete | IS_TxComplete)) != 0)
1500 /* Transmission errors.*/
1501 if ((status & IS_TxComplete) != 0) {
1502 if ((reinit = stge_tx_error(sc)) != 0)
1509 ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
1510 stge_init_locked(sc);
1513 /* Re-enable interrupts. */
1514 CSR_WRITE_2(sc, STGE_IntEnable, sc->sc_IntEnable);
1516 /* Try to get more packets going. */
1517 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
1518 stge_start_locked(ifp);
1527 * Helper; handle transmit interrupts.
1530 stge_txeof(struct stge_softc *sc)
1533 struct stge_txdesc *txd;
1537 STGE_LOCK_ASSERT(sc);
1541 txd = STAILQ_FIRST(&sc->sc_cdata.stge_txbusyq);
1544 bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag,
1545 sc->sc_cdata.stge_tx_ring_map, BUS_DMASYNC_POSTREAD);
1548 * Go through our Tx list and free mbufs for those
1549 * frames which have been transmitted.
1551 for (cons = sc->sc_cdata.stge_tx_cons;;
1552 cons = (cons + 1) % STGE_TX_RING_CNT) {
1553 if (sc->sc_cdata.stge_tx_cnt <= 0)
1555 control = le64toh(sc->sc_rdata.stge_tx_ring[cons].tfd_control);
1556 if ((control & TFD_TFDDone) == 0)
1558 sc->sc_cdata.stge_tx_cnt--;
1559 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
1561 bus_dmamap_sync(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap,
1562 BUS_DMASYNC_POSTWRITE);
1563 bus_dmamap_unload(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap);
1565 /* Output counter is updated with statistics register */
1568 STAILQ_REMOVE_HEAD(&sc->sc_cdata.stge_txbusyq, tx_q);
1569 STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txfreeq, txd, tx_q);
1570 txd = STAILQ_FIRST(&sc->sc_cdata.stge_txbusyq);
1572 sc->sc_cdata.stge_tx_cons = cons;
1573 if (sc->sc_cdata.stge_tx_cnt == 0)
1574 sc->sc_watchdog_timer = 0;
1576 bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag,
1577 sc->sc_cdata.stge_tx_ring_map,
1578 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
1581 static __inline void
1582 stge_discard_rxbuf(struct stge_softc *sc, int idx)
1584 struct stge_rfd *rfd;
1586 rfd = &sc->sc_rdata.stge_rx_ring[idx];
1587 rfd->rfd_status = 0;
1590 #ifndef __NO_STRICT_ALIGNMENT
1592 * It seems that TC9021's DMA engine has alignment restrictions in
1593 * DMA scatter operations. The first DMA segment has no address
1594 * alignment restrictins but the rest should be aligned on 4(?) bytes
1595 * boundary. Otherwise it would corrupt random memory. Since we don't
1596 * know which one is used for the first segment in advance we simply
1597 * don't align at all.
1598 * To avoid copying over an entire frame to align, we allocate a new
1599 * mbuf and copy ethernet header to the new mbuf. The new mbuf is
1600 * prepended into the existing mbuf chain.
1602 static __inline struct mbuf *
1603 stge_fixup_rx(struct stge_softc *sc, struct mbuf *m)
1608 if (m->m_len <= (MCLBYTES - ETHER_HDR_LEN)) {
1609 bcopy(m->m_data, m->m_data + ETHER_HDR_LEN, m->m_len);
1610 m->m_data += ETHER_HDR_LEN;
1613 MGETHDR(n, M_NOWAIT, MT_DATA);
1615 bcopy(m->m_data, n->m_data, ETHER_HDR_LEN);
1616 m->m_data += ETHER_HDR_LEN;
1617 m->m_len -= ETHER_HDR_LEN;
1618 n->m_len = ETHER_HDR_LEN;
1619 M_MOVE_PKTHDR(n, m);
1632 * Helper; handle receive interrupts.
1635 stge_rxeof(struct stge_softc *sc)
1638 struct stge_rxdesc *rxd;
1639 struct mbuf *mp, *m;
1642 int cons, prog, rx_npkts;
1644 STGE_LOCK_ASSERT(sc);
1649 bus_dmamap_sync(sc->sc_cdata.stge_rx_ring_tag,
1650 sc->sc_cdata.stge_rx_ring_map, BUS_DMASYNC_POSTREAD);
1653 for (cons = sc->sc_cdata.stge_rx_cons; prog < STGE_RX_RING_CNT;
1654 prog++, cons = (cons + 1) % STGE_RX_RING_CNT) {
1655 status64 = le64toh(sc->sc_rdata.stge_rx_ring[cons].rfd_status);
1656 status = RFD_RxStatus(status64);
1657 if ((status & RFD_RFDDone) == 0)
1659 #ifdef DEVICE_POLLING
1660 if (ifp->if_capenable & IFCAP_POLLING) {
1661 if (sc->sc_cdata.stge_rxcycles <= 0)
1663 sc->sc_cdata.stge_rxcycles--;
1667 rxd = &sc->sc_cdata.stge_rxdesc[cons];
1671 * If the packet had an error, drop it. Note we count
1672 * the error later in the periodic stats update.
1674 if ((status & RFD_FrameEnd) != 0 && (status &
1675 (RFD_RxFIFOOverrun | RFD_RxRuntFrame |
1676 RFD_RxAlignmentError | RFD_RxFCSError |
1677 RFD_RxLengthError)) != 0) {
1678 stge_discard_rxbuf(sc, cons);
1679 if (sc->sc_cdata.stge_rxhead != NULL) {
1680 m_freem(sc->sc_cdata.stge_rxhead);
1681 STGE_RXCHAIN_RESET(sc);
1686 * Add a new receive buffer to the ring.
1688 if (stge_newbuf(sc, cons) != 0) {
1690 stge_discard_rxbuf(sc, cons);
1691 if (sc->sc_cdata.stge_rxhead != NULL) {
1692 m_freem(sc->sc_cdata.stge_rxhead);
1693 STGE_RXCHAIN_RESET(sc);
1698 if ((status & RFD_FrameEnd) != 0)
1699 mp->m_len = RFD_RxDMAFrameLen(status) -
1700 sc->sc_cdata.stge_rxlen;
1701 sc->sc_cdata.stge_rxlen += mp->m_len;
1704 if (sc->sc_cdata.stge_rxhead == NULL) {
1705 sc->sc_cdata.stge_rxhead = mp;
1706 sc->sc_cdata.stge_rxtail = mp;
1708 mp->m_flags &= ~M_PKTHDR;
1709 sc->sc_cdata.stge_rxtail->m_next = mp;
1710 sc->sc_cdata.stge_rxtail = mp;
1713 if ((status & RFD_FrameEnd) != 0) {
1714 m = sc->sc_cdata.stge_rxhead;
1715 m->m_pkthdr.rcvif = ifp;
1716 m->m_pkthdr.len = sc->sc_cdata.stge_rxlen;
1718 if (m->m_pkthdr.len > sc->sc_if_framesize) {
1720 STGE_RXCHAIN_RESET(sc);
1724 * Set the incoming checksum information for
1727 if ((ifp->if_capenable & IFCAP_RXCSUM) != 0) {
1728 if ((status & RFD_IPDetected) != 0) {
1729 m->m_pkthdr.csum_flags |=
1731 if ((status & RFD_IPError) == 0)
1732 m->m_pkthdr.csum_flags |=
1735 if (((status & RFD_TCPDetected) != 0 &&
1736 (status & RFD_TCPError) == 0) ||
1737 ((status & RFD_UDPDetected) != 0 &&
1738 (status & RFD_UDPError) == 0)) {
1739 m->m_pkthdr.csum_flags |=
1740 (CSUM_DATA_VALID | CSUM_PSEUDO_HDR);
1741 m->m_pkthdr.csum_data = 0xffff;
1745 #ifndef __NO_STRICT_ALIGNMENT
1746 if (sc->sc_if_framesize > (MCLBYTES - ETHER_ALIGN)) {
1747 if ((m = stge_fixup_rx(sc, m)) == NULL) {
1748 STGE_RXCHAIN_RESET(sc);
1753 /* Check for VLAN tagged packets. */
1754 if ((status & RFD_VLANDetected) != 0 &&
1755 (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0) {
1756 m->m_pkthdr.ether_vtag = RFD_TCI(status64);
1757 m->m_flags |= M_VLANTAG;
1762 (*ifp->if_input)(ifp, m);
1766 STGE_RXCHAIN_RESET(sc);
1771 /* Update the consumer index. */
1772 sc->sc_cdata.stge_rx_cons = cons;
1773 bus_dmamap_sync(sc->sc_cdata.stge_rx_ring_tag,
1774 sc->sc_cdata.stge_rx_ring_map,
1775 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
1780 #ifdef DEVICE_POLLING
1782 stge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
1784 struct stge_softc *sc;
1791 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
1796 sc->sc_cdata.stge_rxcycles = count;
1797 rx_npkts = stge_rxeof(sc);
1800 if (cmd == POLL_AND_CHECK_STATUS) {
1801 status = CSR_READ_2(sc, STGE_IntStatus);
1802 status &= sc->sc_IntEnable;
1804 if ((status & IS_HostError) != 0) {
1805 device_printf(sc->sc_dev,
1806 "Host interface error, resetting...\n");
1807 ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
1808 stge_init_locked(sc);
1810 if ((status & IS_TxComplete) != 0) {
1811 if (stge_tx_error(sc) != 0) {
1812 ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
1813 stge_init_locked(sc);
1820 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
1821 stge_start_locked(ifp);
1826 #endif /* DEVICE_POLLING */
1831 * One second timer, used to tick the MII.
1834 stge_tick(void *arg)
1836 struct stge_softc *sc;
1837 struct mii_data *mii;
1839 sc = (struct stge_softc *)arg;
1841 STGE_LOCK_ASSERT(sc);
1843 mii = device_get_softc(sc->sc_miibus);
1846 /* Update statistics counters. */
1847 stge_stats_update(sc);
1850 * Relcaim any pending Tx descriptors to release mbufs in a
1851 * timely manner as we don't generate Tx completion interrupts
1852 * for every frame. This limits the delay to a maximum of one
1855 if (sc->sc_cdata.stge_tx_cnt != 0)
1860 callout_reset(&sc->sc_tick_ch, hz, stge_tick, sc);
1864 * stge_stats_update:
1866 * Read the TC9021 statistics counters.
1869 stge_stats_update(struct stge_softc *sc)
1873 STGE_LOCK_ASSERT(sc);
1877 CSR_READ_4(sc,STGE_OctetRcvOk);
1879 ifp->if_ipackets += CSR_READ_4(sc, STGE_FramesRcvdOk);
1881 ifp->if_ierrors += CSR_READ_2(sc, STGE_FramesLostRxErrors);
1883 CSR_READ_4(sc, STGE_OctetXmtdOk);
1885 ifp->if_opackets += CSR_READ_4(sc, STGE_FramesXmtdOk);
1887 ifp->if_collisions +=
1888 CSR_READ_4(sc, STGE_LateCollisions) +
1889 CSR_READ_4(sc, STGE_MultiColFrames) +
1890 CSR_READ_4(sc, STGE_SingleColFrames);
1893 CSR_READ_2(sc, STGE_FramesAbortXSColls) +
1894 CSR_READ_2(sc, STGE_FramesWEXDeferal);
1900 * Perform a soft reset on the TC9021.
1903 stge_reset(struct stge_softc *sc, uint32_t how)
1909 STGE_LOCK_ASSERT(sc);
1912 ac = CSR_READ_4(sc, STGE_AsicCtrl);
1915 ac |= AC_TxReset | AC_FIFO;
1919 ac |= AC_RxReset | AC_FIFO;
1922 case STGE_RESET_FULL:
1925 * Only assert RstOut if we're fiber. We need GMII clocks
1926 * to be present in order for the reset to complete on fiber
1929 ac |= AC_GlobalReset | AC_RxReset | AC_TxReset |
1930 AC_DMA | AC_FIFO | AC_Network | AC_Host | AC_AutoInit |
1931 (sc->sc_usefiber ? AC_RstOut : 0);
1935 CSR_WRITE_4(sc, STGE_AsicCtrl, ac);
1937 /* Account for reset problem at 10Mbps. */
1940 for (i = 0; i < STGE_TIMEOUT; i++) {
1941 if ((CSR_READ_4(sc, STGE_AsicCtrl) & AC_ResetBusy) == 0)
1946 if (i == STGE_TIMEOUT)
1947 device_printf(sc->sc_dev, "reset failed to complete\n");
1949 /* Set LED, from Linux IPG driver. */
1950 ac = CSR_READ_4(sc, STGE_AsicCtrl);
1951 ac &= ~(AC_LEDMode | AC_LEDSpeed | AC_LEDModeBit1);
1952 if ((sc->sc_led & 0x01) != 0)
1954 if ((sc->sc_led & 0x03) != 0)
1955 ac |= AC_LEDModeBit1;
1956 if ((sc->sc_led & 0x08) != 0)
1958 CSR_WRITE_4(sc, STGE_AsicCtrl, ac);
1960 /* Set PHY, from Linux IPG driver */
1961 v = CSR_READ_1(sc, STGE_PhySet);
1962 v &= ~(PS_MemLenb9b | PS_MemLen | PS_NonCompdet);
1963 v |= ((sc->sc_led & 0x70) >> 4);
1964 CSR_WRITE_1(sc, STGE_PhySet, v);
1968 * stge_init: [ ifnet interface function ]
1970 * Initialize the interface.
1973 stge_init(void *xsc)
1975 struct stge_softc *sc;
1977 sc = (struct stge_softc *)xsc;
1979 stge_init_locked(sc);
1984 stge_init_locked(struct stge_softc *sc)
1987 struct mii_data *mii;
1992 STGE_LOCK_ASSERT(sc);
1995 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
1997 mii = device_get_softc(sc->sc_miibus);
2000 * Cancel any pending I/O.
2005 * Reset the chip to a known state.
2007 stge_reset(sc, STGE_RESET_FULL);
2009 /* Init descriptors. */
2010 error = stge_init_rx_ring(sc);
2012 device_printf(sc->sc_dev,
2013 "initialization failed: no memory for rx buffers\n");
2017 stge_init_tx_ring(sc);
2019 /* Set the station address. */
2020 bcopy(IF_LLADDR(ifp), eaddr, ETHER_ADDR_LEN);
2021 CSR_WRITE_2(sc, STGE_StationAddress0, htole16(eaddr[0]));
2022 CSR_WRITE_2(sc, STGE_StationAddress1, htole16(eaddr[1]));
2023 CSR_WRITE_2(sc, STGE_StationAddress2, htole16(eaddr[2]));
2026 * Set the statistics masks. Disable all the RMON stats,
2027 * and disable selected stats in the non-RMON stats registers.
2029 CSR_WRITE_4(sc, STGE_RMONStatisticsMask, 0xffffffff);
2030 CSR_WRITE_4(sc, STGE_StatisticsMask,
2031 (1U << 1) | (1U << 2) | (1U << 3) | (1U << 4) | (1U << 5) |
2032 (1U << 6) | (1U << 7) | (1U << 8) | (1U << 9) | (1U << 10) |
2033 (1U << 13) | (1U << 14) | (1U << 15) | (1U << 19) | (1U << 20) |
2036 /* Set up the receive filter. */
2037 stge_set_filter(sc);
2038 /* Program multicast filter. */
2042 * Give the transmit and receive ring to the chip.
2044 CSR_WRITE_4(sc, STGE_TFDListPtrHi,
2045 STGE_ADDR_HI(STGE_TX_RING_ADDR(sc, 0)));
2046 CSR_WRITE_4(sc, STGE_TFDListPtrLo,
2047 STGE_ADDR_LO(STGE_TX_RING_ADDR(sc, 0)));
2049 CSR_WRITE_4(sc, STGE_RFDListPtrHi,
2050 STGE_ADDR_HI(STGE_RX_RING_ADDR(sc, 0)));
2051 CSR_WRITE_4(sc, STGE_RFDListPtrLo,
2052 STGE_ADDR_LO(STGE_RX_RING_ADDR(sc, 0)));
2055 * Initialize the Tx auto-poll period. It's OK to make this number
2056 * large (255 is the max, but we use 127) -- we explicitly kick the
2057 * transmit engine when there's actually a packet.
2059 CSR_WRITE_1(sc, STGE_TxDMAPollPeriod, 127);
2061 /* ..and the Rx auto-poll period. */
2062 CSR_WRITE_1(sc, STGE_RxDMAPollPeriod, 1);
2064 /* Initialize the Tx start threshold. */
2065 CSR_WRITE_2(sc, STGE_TxStartThresh, sc->sc_txthresh);
2067 /* Rx DMA thresholds, from Linux */
2068 CSR_WRITE_1(sc, STGE_RxDMABurstThresh, 0x30);
2069 CSR_WRITE_1(sc, STGE_RxDMAUrgentThresh, 0x30);
2071 /* Rx early threhold, from Linux */
2072 CSR_WRITE_2(sc, STGE_RxEarlyThresh, 0x7ff);
2074 /* Tx DMA thresholds, from Linux */
2075 CSR_WRITE_1(sc, STGE_TxDMABurstThresh, 0x30);
2076 CSR_WRITE_1(sc, STGE_TxDMAUrgentThresh, 0x04);
2079 * Initialize the Rx DMA interrupt control register. We
2080 * request an interrupt after every incoming packet, but
2081 * defer it for sc_rxint_dmawait us. When the number of
2082 * interrupts pending reaches STGE_RXINT_NFRAME, we stop
2083 * deferring the interrupt, and signal it immediately.
2085 CSR_WRITE_4(sc, STGE_RxDMAIntCtrl,
2086 RDIC_RxFrameCount(sc->sc_rxint_nframe) |
2087 RDIC_RxDMAWaitTime(STGE_RXINT_USECS2TICK(sc->sc_rxint_dmawait)));
2090 * Initialize the interrupt mask.
2092 sc->sc_IntEnable = IS_HostError | IS_TxComplete |
2093 IS_TxDMAComplete | IS_RxDMAComplete | IS_RFDListEnd;
2094 #ifdef DEVICE_POLLING
2095 /* Disable interrupts if we are polling. */
2096 if ((ifp->if_capenable & IFCAP_POLLING) != 0)
2097 CSR_WRITE_2(sc, STGE_IntEnable, 0);
2100 CSR_WRITE_2(sc, STGE_IntEnable, sc->sc_IntEnable);
2103 * Configure the DMA engine.
2104 * XXX Should auto-tune TxBurstLimit.
2106 CSR_WRITE_4(sc, STGE_DMACtrl, sc->sc_DMACtrl | DMAC_TxBurstLimit(3));
2109 * Send a PAUSE frame when we reach 29,696 bytes in the Rx
2110 * FIFO, and send an un-PAUSE frame when we reach 3056 bytes
2113 CSR_WRITE_2(sc, STGE_FlowOnTresh, 29696 / 16);
2114 CSR_WRITE_2(sc, STGE_FlowOffThresh, 3056 / 16);
2117 * Set the maximum frame size.
2119 sc->sc_if_framesize = ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
2120 CSR_WRITE_2(sc, STGE_MaxFrameSize, sc->sc_if_framesize);
2123 * Initialize MacCtrl -- do it before setting the media,
2124 * as setting the media will actually program the register.
2126 * Note: We have to poke the IFS value before poking
2129 /* Tx/Rx MAC should be disabled before programming IFS.*/
2130 CSR_WRITE_4(sc, STGE_MACCtrl, MC_IFSSelect(MC_IFS96bit));
2132 stge_vlan_setup(sc);
2134 if (sc->sc_rev >= 6) { /* >= B.2 */
2135 /* Multi-frag frame bug work-around. */
2136 CSR_WRITE_2(sc, STGE_DebugCtrl,
2137 CSR_READ_2(sc, STGE_DebugCtrl) | 0x0200);
2139 /* Tx Poll Now bug work-around. */
2140 CSR_WRITE_2(sc, STGE_DebugCtrl,
2141 CSR_READ_2(sc, STGE_DebugCtrl) | 0x0010);
2142 /* Tx Poll Now bug work-around. */
2143 CSR_WRITE_2(sc, STGE_DebugCtrl,
2144 CSR_READ_2(sc, STGE_DebugCtrl) | 0x0020);
2147 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2148 v |= MC_StatisticsEnable | MC_TxEnable | MC_RxEnable;
2149 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2151 * It seems that transmitting frames without checking the state of
2152 * Rx/Tx MAC wedge the hardware.
2159 * Set the current media.
2164 * Start the one second MII clock.
2166 callout_reset(&sc->sc_tick_ch, hz, stge_tick, sc);
2171 ifp->if_drv_flags |= IFF_DRV_RUNNING;
2172 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
2176 device_printf(sc->sc_dev, "interface not running\n");
2180 stge_vlan_setup(struct stge_softc *sc)
2187 * The NIC always copy a VLAN tag regardless of STGE_MACCtrl
2188 * MC_AutoVLANuntagging bit.
2189 * MC_AutoVLANtagging bit selects which VLAN source to use
2190 * between STGE_VLANTag and TFC. However TFC TFD_VLANTagInsert
2191 * bit has priority over MC_AutoVLANtagging bit. So we always
2192 * use TFC instead of STGE_VLANTag register.
2194 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2195 if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0)
2196 v |= MC_AutoVLANuntagging;
2198 v &= ~MC_AutoVLANuntagging;
2199 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2203 * Stop transmission on the interface.
2206 stge_stop(struct stge_softc *sc)
2209 struct stge_txdesc *txd;
2210 struct stge_rxdesc *rxd;
2214 STGE_LOCK_ASSERT(sc);
2216 * Stop the one second clock.
2218 callout_stop(&sc->sc_tick_ch);
2219 sc->sc_watchdog_timer = 0;
2222 * Disable interrupts.
2224 CSR_WRITE_2(sc, STGE_IntEnable, 0);
2227 * Stop receiver, transmitter, and stats update.
2231 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2232 v |= MC_StatisticsDisable;
2233 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2236 * Stop the transmit and receive DMA.
2239 CSR_WRITE_4(sc, STGE_TFDListPtrHi, 0);
2240 CSR_WRITE_4(sc, STGE_TFDListPtrLo, 0);
2241 CSR_WRITE_4(sc, STGE_RFDListPtrHi, 0);
2242 CSR_WRITE_4(sc, STGE_RFDListPtrLo, 0);
2245 * Free RX and TX mbufs still in the queues.
2247 for (i = 0; i < STGE_RX_RING_CNT; i++) {
2248 rxd = &sc->sc_cdata.stge_rxdesc[i];
2249 if (rxd->rx_m != NULL) {
2250 bus_dmamap_sync(sc->sc_cdata.stge_rx_tag,
2251 rxd->rx_dmamap, BUS_DMASYNC_POSTREAD);
2252 bus_dmamap_unload(sc->sc_cdata.stge_rx_tag,
2258 for (i = 0; i < STGE_TX_RING_CNT; i++) {
2259 txd = &sc->sc_cdata.stge_txdesc[i];
2260 if (txd->tx_m != NULL) {
2261 bus_dmamap_sync(sc->sc_cdata.stge_tx_tag,
2262 txd->tx_dmamap, BUS_DMASYNC_POSTWRITE);
2263 bus_dmamap_unload(sc->sc_cdata.stge_tx_tag,
2271 * Mark the interface down and cancel the watchdog timer.
2274 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
2279 stge_start_tx(struct stge_softc *sc)
2284 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2285 if ((v & MC_TxEnabled) != 0)
2288 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2289 CSR_WRITE_1(sc, STGE_TxDMAPollPeriod, 127);
2290 for (i = STGE_TIMEOUT; i > 0; i--) {
2292 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2293 if ((v & MC_TxEnabled) != 0)
2297 device_printf(sc->sc_dev, "Starting Tx MAC timed out\n");
2301 stge_start_rx(struct stge_softc *sc)
2306 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2307 if ((v & MC_RxEnabled) != 0)
2310 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2311 CSR_WRITE_1(sc, STGE_RxDMAPollPeriod, 1);
2312 for (i = STGE_TIMEOUT; i > 0; i--) {
2314 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2315 if ((v & MC_RxEnabled) != 0)
2319 device_printf(sc->sc_dev, "Starting Rx MAC timed out\n");
2323 stge_stop_tx(struct stge_softc *sc)
2328 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2329 if ((v & MC_TxEnabled) == 0)
2332 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2333 for (i = STGE_TIMEOUT; i > 0; i--) {
2335 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2336 if ((v & MC_TxEnabled) == 0)
2340 device_printf(sc->sc_dev, "Stopping Tx MAC timed out\n");
2344 stge_stop_rx(struct stge_softc *sc)
2349 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2350 if ((v & MC_RxEnabled) == 0)
2353 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2354 for (i = STGE_TIMEOUT; i > 0; i--) {
2356 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2357 if ((v & MC_RxEnabled) == 0)
2361 device_printf(sc->sc_dev, "Stopping Rx MAC timed out\n");
2365 stge_init_tx_ring(struct stge_softc *sc)
2367 struct stge_ring_data *rd;
2368 struct stge_txdesc *txd;
2372 STAILQ_INIT(&sc->sc_cdata.stge_txfreeq);
2373 STAILQ_INIT(&sc->sc_cdata.stge_txbusyq);
2375 sc->sc_cdata.stge_tx_prod = 0;
2376 sc->sc_cdata.stge_tx_cons = 0;
2377 sc->sc_cdata.stge_tx_cnt = 0;
2380 bzero(rd->stge_tx_ring, STGE_TX_RING_SZ);
2381 for (i = 0; i < STGE_TX_RING_CNT; i++) {
2382 if (i == (STGE_TX_RING_CNT - 1))
2383 addr = STGE_TX_RING_ADDR(sc, 0);
2385 addr = STGE_TX_RING_ADDR(sc, i + 1);
2386 rd->stge_tx_ring[i].tfd_next = htole64(addr);
2387 rd->stge_tx_ring[i].tfd_control = htole64(TFD_TFDDone);
2388 txd = &sc->sc_cdata.stge_txdesc[i];
2389 STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txfreeq, txd, tx_q);
2392 bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag,
2393 sc->sc_cdata.stge_tx_ring_map,
2394 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2399 stge_init_rx_ring(struct stge_softc *sc)
2401 struct stge_ring_data *rd;
2405 sc->sc_cdata.stge_rx_cons = 0;
2406 STGE_RXCHAIN_RESET(sc);
2409 bzero(rd->stge_rx_ring, STGE_RX_RING_SZ);
2410 for (i = 0; i < STGE_RX_RING_CNT; i++) {
2411 if (stge_newbuf(sc, i) != 0)
2413 if (i == (STGE_RX_RING_CNT - 1))
2414 addr = STGE_RX_RING_ADDR(sc, 0);
2416 addr = STGE_RX_RING_ADDR(sc, i + 1);
2417 rd->stge_rx_ring[i].rfd_next = htole64(addr);
2418 rd->stge_rx_ring[i].rfd_status = 0;
2421 bus_dmamap_sync(sc->sc_cdata.stge_rx_ring_tag,
2422 sc->sc_cdata.stge_rx_ring_map,
2423 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2431 * Add a receive buffer to the indicated descriptor.
2434 stge_newbuf(struct stge_softc *sc, int idx)
2436 struct stge_rxdesc *rxd;
2437 struct stge_rfd *rfd;
2439 bus_dma_segment_t segs[1];
2443 m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
2446 m->m_len = m->m_pkthdr.len = MCLBYTES;
2448 * The hardware requires 4bytes aligned DMA address when JUMBO
2451 if (sc->sc_if_framesize <= (MCLBYTES - ETHER_ALIGN))
2452 m_adj(m, ETHER_ALIGN);
2454 if (bus_dmamap_load_mbuf_sg(sc->sc_cdata.stge_rx_tag,
2455 sc->sc_cdata.stge_rx_sparemap, m, segs, &nsegs, 0) != 0) {
2459 KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
2461 rxd = &sc->sc_cdata.stge_rxdesc[idx];
2462 if (rxd->rx_m != NULL) {
2463 bus_dmamap_sync(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap,
2464 BUS_DMASYNC_POSTREAD);
2465 bus_dmamap_unload(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap);
2467 map = rxd->rx_dmamap;
2468 rxd->rx_dmamap = sc->sc_cdata.stge_rx_sparemap;
2469 sc->sc_cdata.stge_rx_sparemap = map;
2470 bus_dmamap_sync(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap,
2471 BUS_DMASYNC_PREREAD);
2474 rfd = &sc->sc_rdata.stge_rx_ring[idx];
2475 rfd->rfd_frag.frag_word0 =
2476 htole64(FRAG_ADDR(segs[0].ds_addr) | FRAG_LEN(segs[0].ds_len));
2477 rfd->rfd_status = 0;
2485 * Set up the receive filter.
2488 stge_set_filter(struct stge_softc *sc)
2493 STGE_LOCK_ASSERT(sc);
2497 mode = CSR_READ_2(sc, STGE_ReceiveMode);
2498 mode |= RM_ReceiveUnicast;
2499 if ((ifp->if_flags & IFF_BROADCAST) != 0)
2500 mode |= RM_ReceiveBroadcast;
2502 mode &= ~RM_ReceiveBroadcast;
2503 if ((ifp->if_flags & IFF_PROMISC) != 0)
2504 mode |= RM_ReceiveAllFrames;
2506 mode &= ~RM_ReceiveAllFrames;
2508 CSR_WRITE_2(sc, STGE_ReceiveMode, mode);
2512 stge_set_multi(struct stge_softc *sc)
2515 struct ifmultiaddr *ifma;
2521 STGE_LOCK_ASSERT(sc);
2525 mode = CSR_READ_2(sc, STGE_ReceiveMode);
2526 if ((ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI)) != 0) {
2527 if ((ifp->if_flags & IFF_PROMISC) != 0)
2528 mode |= RM_ReceiveAllFrames;
2529 else if ((ifp->if_flags & IFF_ALLMULTI) != 0)
2530 mode |= RM_ReceiveMulticast;
2531 CSR_WRITE_2(sc, STGE_ReceiveMode, mode);
2535 /* clear existing filters. */
2536 CSR_WRITE_4(sc, STGE_HashTable0, 0);
2537 CSR_WRITE_4(sc, STGE_HashTable1, 0);
2540 * Set up the multicast address filter by passing all multicast
2541 * addresses through a CRC generator, and then using the low-order
2542 * 6 bits as an index into the 64 bit multicast hash table. The
2543 * high order bits select the register, while the rest of the bits
2544 * select the bit within the register.
2547 bzero(mchash, sizeof(mchash));
2550 if_maddr_rlock(sc->sc_ifp);
2551 TAILQ_FOREACH(ifma, &sc->sc_ifp->if_multiaddrs, ifma_link) {
2552 if (ifma->ifma_addr->sa_family != AF_LINK)
2554 crc = ether_crc32_be(LLADDR((struct sockaddr_dl *)
2555 ifma->ifma_addr), ETHER_ADDR_LEN);
2557 /* Just want the 6 least significant bits. */
2560 /* Set the corresponding bit in the hash table. */
2561 mchash[crc >> 5] |= 1 << (crc & 0x1f);
2564 if_maddr_runlock(ifp);
2566 mode &= ~(RM_ReceiveMulticast | RM_ReceiveAllFrames);
2568 mode |= RM_ReceiveMulticastHash;
2570 mode &= ~RM_ReceiveMulticastHash;
2572 CSR_WRITE_4(sc, STGE_HashTable0, mchash[0]);
2573 CSR_WRITE_4(sc, STGE_HashTable1, mchash[1]);
2574 CSR_WRITE_2(sc, STGE_ReceiveMode, mode);
2578 sysctl_int_range(SYSCTL_HANDLER_ARGS, int low, int high)
2584 value = *(int *)arg1;
2585 error = sysctl_handle_int(oidp, &value, 0, req);
2586 if (error || !req->newptr)
2588 if (value < low || value > high)
2590 *(int *)arg1 = value;
2596 sysctl_hw_stge_rxint_nframe(SYSCTL_HANDLER_ARGS)
2598 return (sysctl_int_range(oidp, arg1, arg2, req,
2599 STGE_RXINT_NFRAME_MIN, STGE_RXINT_NFRAME_MAX));
2603 sysctl_hw_stge_rxint_dmawait(SYSCTL_HANDLER_ARGS)
2605 return (sysctl_int_range(oidp, arg1, arg2, req,
2606 STGE_RXINT_DMAWAIT_MIN, STGE_RXINT_DMAWAIT_MAX));