1 /* $NetBSD: ucomvar.h,v 1.9 2001/01/23 21:56:17 augustss Exp $ */
5 * Copyright (c) 2001-2002, Shunsuke Akiyama <akiyama@jp.FreeBSD.org>.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * Copyright (c) 1999 The NetBSD Foundation, Inc.
32 * All rights reserved.
34 * This code is derived from software contributed to The NetBSD Foundation
35 * by Lennart Augustsson (lennart@augustsson.net) at
36 * Carlstedt Research & Technology.
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
41 * 1. Redistributions of source code must retain the above copyright
42 * notice, this list of conditions and the following disclaimer.
43 * 2. Redistributions in binary form must reproduce the above copyright
44 * notice, this list of conditions and the following disclaimer in the
45 * documentation and/or other materials provided with the distribution.
47 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
48 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
49 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
50 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
51 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
52 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
53 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
54 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
55 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
56 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
57 * POSSIBILITY OF SUCH DAMAGE.
60 #ifndef _USB_SERIAL_H_
61 #define _USB_SERIAL_H_
64 #include <sys/serial.h>
65 #include <sys/fcntl.h>
66 #include <sys/sysctl.h>
68 /* Module interface related macros */
72 #define UCOM_PREFVER UCOM_MODVER
74 #define UCOM_JITTERBUF_SIZE 128 /* bytes */
78 struct usb_device_request;
82 * NOTE: There is no guarantee that "ucom_cfg_close()" will
83 * be called after "ucom_cfg_open()" if the device is detached
86 struct ucom_callback {
87 void (*ucom_cfg_get_status) (struct ucom_softc *, uint8_t *plsr, uint8_t *pmsr);
88 void (*ucom_cfg_set_dtr) (struct ucom_softc *, uint8_t);
89 void (*ucom_cfg_set_rts) (struct ucom_softc *, uint8_t);
90 void (*ucom_cfg_set_break) (struct ucom_softc *, uint8_t);
91 void (*ucom_cfg_set_ring) (struct ucom_softc *, uint8_t);
92 void (*ucom_cfg_param) (struct ucom_softc *, struct termios *);
93 void (*ucom_cfg_open) (struct ucom_softc *);
94 void (*ucom_cfg_close) (struct ucom_softc *);
95 int (*ucom_pre_open) (struct ucom_softc *);
96 int (*ucom_pre_param) (struct ucom_softc *, struct termios *);
97 int (*ucom_ioctl) (struct ucom_softc *, uint32_t, caddr_t, int, struct thread *);
98 void (*ucom_start_read) (struct ucom_softc *);
99 void (*ucom_stop_read) (struct ucom_softc *);
100 void (*ucom_start_write) (struct ucom_softc *);
101 void (*ucom_stop_write) (struct ucom_softc *);
102 void (*ucom_tty_name) (struct ucom_softc *, char *pbuf, uint16_t buflen, uint16_t unit, uint16_t subunit);
103 void (*ucom_poll) (struct ucom_softc *);
104 void (*ucom_free) (struct ucom_softc *);
107 /* Line status register */
108 #define ULSR_RCV_FIFO 0x80
109 #define ULSR_TSRE 0x40 /* Transmitter empty: byte sent */
110 #define ULSR_TXRDY 0x20 /* Transmitter buffer empty */
111 #define ULSR_BI 0x10 /* Break detected */
112 #define ULSR_FE 0x08 /* Framing error: bad stop bit */
113 #define ULSR_PE 0x04 /* Parity error */
114 #define ULSR_OE 0x02 /* Overrun, lost incoming byte */
115 #define ULSR_RXRDY 0x01 /* Byte ready in Receive Buffer */
116 #define ULSR_RCV_MASK 0x1f /* Mask for incoming data or error */
118 struct ucom_cfg_task {
119 struct usb_proc_msg hdr;
120 struct ucom_softc *sc;
123 struct ucom_param_task {
124 struct usb_proc_msg hdr;
125 struct ucom_softc *sc;
126 struct termios termios_copy;
129 struct ucom_super_softc {
130 struct usb_process sc_tq;
134 int sc_flag; /* see UCOM_FLAG_XXX */
135 struct sysctl_oid *sc_sysctl_ttyname;
136 struct sysctl_oid *sc_sysctl_ttyports;
142 * NOTE: To avoid losing level change information we use two
143 * tasks instead of one for all commands.
145 * Level changes are transitions like:
152 struct ucom_cfg_task sc_start_task[2];
153 struct ucom_cfg_task sc_open_task[2];
154 struct ucom_cfg_task sc_close_task[2];
155 struct ucom_cfg_task sc_line_state_task[2];
156 struct ucom_cfg_task sc_status_task[2];
157 struct ucom_param_task sc_param_task[2];
158 /* Used to set "UCOM_FLAG_GP_DATA" flag: */
159 struct usb_proc_msg *sc_last_start_xfer;
160 const struct ucom_callback *sc_callback;
161 struct ucom_super_softc *sc_super;
166 uint16_t sc_jitterbuf_in;
167 uint16_t sc_jitterbuf_out;
170 #define UCOM_FLAG_RTS_IFLOW 0x01 /* use RTS input flow control */
171 #define UCOM_FLAG_GONE 0x02 /* the device is gone */
172 #define UCOM_FLAG_ATTACHED 0x04 /* set if attached */
173 #define UCOM_FLAG_GP_DATA 0x08 /* set if get and put data is possible */
174 #define UCOM_FLAG_LL_READY 0x20 /* set if low layer is ready */
175 #define UCOM_FLAG_HL_READY 0x40 /* set if high layer is ready */
176 #define UCOM_FLAG_CONSOLE 0x80 /* set if device is a console */
177 #define UCOM_FLAG_WAIT_REFS 0x0100 /* set if we must wait for refs */
178 #define UCOM_FLAG_FREE_UNIT 0x0200 /* set if we must free the unit */
179 #define UCOM_FLAG_INWAKEUP 0x0400 /* set if we are in the tsw_inwakeup callback */
183 /* programmed line state bits */
184 uint8_t sc_pls_set; /* set bits */
185 uint8_t sc_pls_clr; /* cleared bits */
186 uint8_t sc_pls_curr; /* last state */
187 #define UCOM_LS_DTR 0x01
188 #define UCOM_LS_RTS 0x02
189 #define UCOM_LS_BREAK 0x04
190 #define UCOM_LS_RING 0x08
191 uint8_t sc_jitterbuf[UCOM_JITTERBUF_SIZE];
194 #define UCOM_MTX_ASSERT(sc, what) mtx_assert((sc)->sc_mtx, what)
195 #define UCOM_MTX_LOCK(sc) mtx_lock((sc)->sc_mtx)
196 #define UCOM_MTX_UNLOCK(sc) mtx_unlock((sc)->sc_mtx)
197 #define UCOM_UNLOAD_DRAIN(x) \
198 SYSUNINIT(var, SI_SUB_KLD - 2, SI_ORDER_ANY, ucom_drain_all, 0)
200 #define ucom_cfg_do_request(udev,com,req,ptr,flags,timo) \
201 usbd_do_request_proc(udev,&(com)->sc_super->sc_tq,req,ptr,flags,NULL,timo)
203 int ucom_attach(struct ucom_super_softc *,
204 struct ucom_softc *, int, void *,
205 const struct ucom_callback *callback, struct mtx *);
206 void ucom_detach(struct ucom_super_softc *, struct ucom_softc *);
207 void ucom_set_pnpinfo_usb(struct ucom_super_softc *, device_t);
208 void ucom_status_change(struct ucom_softc *);
209 uint8_t ucom_get_data(struct ucom_softc *, struct usb_page_cache *,
210 uint32_t, uint32_t, uint32_t *);
211 void ucom_put_data(struct ucom_softc *, struct usb_page_cache *,
213 uint8_t ucom_cfg_is_gone(struct ucom_softc *);
214 void ucom_drain(struct ucom_super_softc *);
215 void ucom_drain_all(void *);
216 void ucom_ref(struct ucom_super_softc *);
217 int ucom_unref(struct ucom_super_softc *);
218 #endif /* _USB_SERIAL_H_ */