2 * Copyright (c) 2013 LSI Corp.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the author nor the names of any co-contributors
14 * may be used to endorse or promote products derived from this software
15 * without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 * LSI MPT-Fusion Host Adapter FreeBSD
35 * Copyright (c) 2000-2013 LSI Corporation.
39 * Title: MPI Serial Attached SCSI structures and definitions
40 * Creation Date: February 9, 2007
42 * mpi2_sas.h Version: 02.00.08
44 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
45 * prefix are for use only on MPI v2.5 products, and must not be used
46 * with MPI v2.0 products. Unless otherwise noted, names beginning with
47 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
52 * Date Version Description
53 * -------- -------- ------------------------------------------------------
54 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
55 * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit
57 * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
59 * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
60 * to MPI2_SGE_IO_UNION since it supports chained SGLs.
61 * 05-12-10 02.00.04 Modified some comments.
62 * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control.
63 * 11-18-11 02.00.06 Incorporating additions for MPI v2.5.
64 * 07-10-12 02.00.07 Added MPI2_SATA_PT_SGE_UNION for use in the SATA
65 * Passthrough Request message.
66 * 08-19-13 02.00.08 Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete
67 * for anything newer than MPI v2.0.
68 * --------------------------------------------------------------------------
75 * Values for SASStatus.
77 #define MPI2_SASSTATUS_SUCCESS (0x00)
78 #define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01)
79 #define MPI2_SASSTATUS_INVALID_FRAME (0x02)
80 #define MPI2_SASSTATUS_UTC_BAD_DEST (0x03)
81 #define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
82 #define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
83 #define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
84 #define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
85 #define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
86 #define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
87 #define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
88 #define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
89 #define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
90 #define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
91 #define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
92 #define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
93 #define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
94 #define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11)
95 #define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
96 #define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
97 #define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
101 * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
102 * data and SAS Configuration pages.
104 #define MPI2_SAS_DEVICE_INFO_SEP (0x00004000)
105 #define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
106 #define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
107 #define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
108 #define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
109 #define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
110 #define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
111 #define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
112 #define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
113 #define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
114 #define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
115 #define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
117 #define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
118 #define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
119 #define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
120 #define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
121 #define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
124 /*****************************************************************************
128 *****************************************************************************/
130 /****************************************************************************
131 * SMP Passthrough messages
132 ****************************************************************************/
134 /* SMP Passthrough Request Message */
135 typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST
137 U8 PassthroughFlags; /* 0x00 */
138 U8 PhysicalPort; /* 0x01 */
139 U8 ChainOffset; /* 0x02 */
140 U8 Function; /* 0x03 */
141 U16 RequestDataLength; /* 0x04 */
142 U8 SGLFlags; /* 0x06 */ /* MPI v2.0 only. Reserved on MPI v2.5. */
143 U8 MsgFlags; /* 0x07 */
146 U16 Reserved1; /* 0x0A */
147 U32 Reserved2; /* 0x0C */
148 U64 SASAddress; /* 0x10 */
149 U32 Reserved3; /* 0x18 */
150 U32 Reserved4; /* 0x1C */
151 MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */ /* MPI v2.5: IEEE Simple 64 elements only */
152 } MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
153 Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t;
155 /* values for PassthroughFlags field */
156 #define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
158 /* MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
161 /* SMP Passthrough Reply Message */
162 typedef struct _MPI2_SMP_PASSTHROUGH_REPLY
164 U8 PassthroughFlags; /* 0x00 */
165 U8 PhysicalPort; /* 0x01 */
166 U8 MsgLength; /* 0x02 */
167 U8 Function; /* 0x03 */
168 U16 ResponseDataLength; /* 0x04 */
169 U8 SGLFlags; /* 0x06 */
170 U8 MsgFlags; /* 0x07 */
173 U16 Reserved1; /* 0x0A */
174 U8 Reserved2; /* 0x0C */
175 U8 SASStatus; /* 0x0D */
176 U16 IOCStatus; /* 0x0E */
177 U32 IOCLogInfo; /* 0x10 */
178 U32 Reserved3; /* 0x14 */
179 U8 ResponseData[4]; /* 0x18 */
180 } MPI2_SMP_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REPLY,
181 Mpi2SmpPassthroughReply_t, MPI2_POINTER pMpi2SmpPassthroughReply_t;
183 /* values for PassthroughFlags field */
184 #define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
186 /* values for SASStatus field are at the top of this file */
189 /****************************************************************************
190 * SATA Passthrough messages
191 ****************************************************************************/
193 typedef union _MPI2_SATA_PT_SGE_UNION
195 MPI2_SGE_SIMPLE_UNION MpiSimple; /* MPI v2.0 only */
196 MPI2_SGE_CHAIN_UNION MpiChain; /* MPI v2.0 only */
197 MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
198 MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; /* MPI v2.0 only */
199 MPI25_IEEE_SGE_CHAIN64 IeeeChain64; /* MPI v2.5 only */
200 } MPI2_SATA_PT_SGE_UNION, MPI2_POINTER PTR_MPI2_SATA_PT_SGE_UNION,
201 Mpi2SataPTSGEUnion_t, MPI2_POINTER pMpi2SataPTSGEUnion_t;
204 /* SATA Passthrough Request Message */
205 typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST
207 U16 DevHandle; /* 0x00 */
208 U8 ChainOffset; /* 0x02 */
209 U8 Function; /* 0x03 */
210 U16 PassthroughFlags; /* 0x04 */
211 U8 SGLFlags; /* 0x06 */ /* MPI v2.0 only. Reserved on MPI v2.5. */
212 U8 MsgFlags; /* 0x07 */
215 U16 Reserved1; /* 0x0A */
216 U32 Reserved2; /* 0x0C */
217 U32 Reserved3; /* 0x10 */
218 U32 Reserved4; /* 0x14 */
219 U32 DataLength; /* 0x18 */
220 U8 CommandFIS[20]; /* 0x1C */
221 MPI2_SATA_PT_SGE_UNION SGL; /* 0x30 */ /* MPI v2.5: IEEE 64 elements only */
222 } MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
223 Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t;
225 /* values for PassthroughFlags field */
226 #define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
227 #define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020)
228 #define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
229 #define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
230 #define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
231 #define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
233 /* MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
236 /* SATA Passthrough Reply Message */
237 typedef struct _MPI2_SATA_PASSTHROUGH_REPLY
239 U16 DevHandle; /* 0x00 */
240 U8 MsgLength; /* 0x02 */
241 U8 Function; /* 0x03 */
242 U16 PassthroughFlags; /* 0x04 */
243 U8 SGLFlags; /* 0x06 */
244 U8 MsgFlags; /* 0x07 */
247 U16 Reserved1; /* 0x0A */
248 U8 Reserved2; /* 0x0C */
249 U8 SASStatus; /* 0x0D */
250 U16 IOCStatus; /* 0x0E */
251 U32 IOCLogInfo; /* 0x10 */
252 U8 StatusFIS[20]; /* 0x14 */
253 U32 StatusControlRegisters; /* 0x28 */
254 U32 TransferCount; /* 0x2C */
255 } MPI2_SATA_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REPLY,
256 Mpi2SataPassthroughReply_t, MPI2_POINTER pMpi2SataPassthroughReply_t;
258 /* values for SASStatus field are at the top of this file */
261 /****************************************************************************
262 * SAS IO Unit Control messages
263 ****************************************************************************/
265 /* SAS IO Unit Control Request Message */
266 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST
268 U8 Operation; /* 0x00 */
269 U8 Reserved1; /* 0x01 */
270 U8 ChainOffset; /* 0x02 */
271 U8 Function; /* 0x03 */
272 U16 DevHandle; /* 0x04 */
273 U8 IOCParameter; /* 0x06 */
274 U8 MsgFlags; /* 0x07 */
277 U16 Reserved3; /* 0x0A */
278 U16 Reserved4; /* 0x0C */
279 U8 PhyNum; /* 0x0E */
280 U8 PrimFlags; /* 0x0F */
281 U32 Primitive; /* 0x10 */
282 U8 LookupMethod; /* 0x14 */
283 U8 Reserved5; /* 0x15 */
284 U16 SlotNumber; /* 0x16 */
285 U64 LookupAddress; /* 0x18 */
286 U32 IOCParameterValue; /* 0x20 */
287 U32 Reserved7; /* 0x24 */
288 U32 Reserved8; /* 0x28 */
289 } MPI2_SAS_IOUNIT_CONTROL_REQUEST,
290 MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST,
291 Mpi2SasIoUnitControlRequest_t, MPI2_POINTER pMpi2SasIoUnitControlRequest_t;
293 /* values for the Operation field */
294 #define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
295 #define MPI2_SAS_OP_PHY_LINK_RESET (0x06)
296 #define MPI2_SAS_OP_PHY_HARD_RESET (0x07)
297 #define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
298 #define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A)
299 #define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
300 #define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) /* MPI v2.0 only */
301 #define MPI2_SAS_OP_REMOVE_DEVICE (0x0D)
302 #define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E)
303 #define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F)
304 #define MPI25_SAS_OP_ENABLE_FP_DEVICE (0x10)
305 #define MPI25_SAS_OP_DISABLE_FP_DEVICE (0x11)
306 #define MPI25_SAS_OP_ENABLE_FP_ALL (0x12)
307 #define MPI25_SAS_OP_DISABLE_FP_ALL (0x13)
308 #define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14)
309 #define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15)
310 #define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)
312 /* values for the PrimFlags field */
313 #define MPI2_SAS_PRIMFLAGS_SINGLE (0x08)
314 #define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02)
315 #define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01)
317 /* values for the LookupMethod field */
318 #define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01)
319 #define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02)
320 #define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
323 /* SAS IO Unit Control Reply Message */
324 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY
326 U8 Operation; /* 0x00 */
327 U8 Reserved1; /* 0x01 */
328 U8 MsgLength; /* 0x02 */
329 U8 Function; /* 0x03 */
330 U16 DevHandle; /* 0x04 */
331 U8 IOCParameter; /* 0x06 */
332 U8 MsgFlags; /* 0x07 */
335 U16 Reserved3; /* 0x0A */
336 U16 Reserved4; /* 0x0C */
337 U16 IOCStatus; /* 0x0E */
338 U32 IOCLogInfo; /* 0x10 */
339 } MPI2_SAS_IOUNIT_CONTROL_REPLY,
340 MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY,
341 Mpi2SasIoUnitControlReply_t, MPI2_POINTER pMpi2SasIoUnitControlReply_t;