2 * Copyright (c) 2013 LSI Corp.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the author nor the names of any co-contributors
14 * may be used to endorse or promote products derived from this software
15 * without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 * LSI MPT-Fusion Host Adapter FreeBSD
35 * Copyright (c) 2000-2012 LSI Corporation.
39 * Title: MPI Target mode messages and structures
40 * Creation Date: September 8, 2006
42 * mpi2_targ.h Version: 02.00.06
44 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
45 * prefix are for use only on MPI v2.5 products, and must not be used
46 * with MPI v2.0 products. Unless otherwise noted, names beginning with
47 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
52 * Date Version Description
53 * -------- -------- ------------------------------------------------------
54 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
55 * 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to
56 * BufferPostFlags field of CommandBufferPostBase Request.
57 * 02-29-08 02.00.02 Modified various names to make them 32-character unique.
58 * 10-02-08 02.00.03 Removed NextCmdBufferOffset from
59 * MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST.
60 * Target Status Send Request only takes a single SGE for
62 * 02-10-10 02.00.04 Added comment to MPI2_TARGET_SSP_RSP_IU structure.
63 * 11-18-11 02.00.05 Incorporating additions for MPI v2.5.
64 * 11-27-12 02.00.06 Added InitiatorDevHandle field to MPI2_TARGET_MODE_ABORT
65 * request message structure.
66 * Added AbortType MPI2_TARGET_MODE_ABORT_DEVHANDLE and
67 * MPI2_TARGET_MODE_ABORT_ALL_COMMANDS.
68 * --------------------------------------------------------------------------
75 /******************************************************************************
77 * SCSI Target Messages
79 *******************************************************************************/
81 /****************************************************************************
82 * Target Command Buffer Post Base Request
83 ****************************************************************************/
85 typedef struct _MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST
87 U8 BufferPostFlags; /* 0x00 */
88 U8 Reserved1; /* 0x01 */
89 U8 ChainOffset; /* 0x02 */
90 U8 Function; /* 0x03 */
91 U16 TotalCmdBuffers; /* 0x04 */
92 U8 Reserved; /* 0x06 */
93 U8 MsgFlags; /* 0x07 */
96 U16 Reserved2; /* 0x0A */
97 U32 Reserved3; /* 0x0C */
98 U16 CmdBufferLength; /* 0x10 */
99 U16 Reserved4; /* 0x12 */
100 U32 BaseAddressLow; /* 0x14 */
101 U32 BaseAddressHigh; /* 0x18 */
102 } MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST,
103 MPI2_POINTER PTR_MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST,
104 Mpi2TargetCmdBufferPostBaseRequest_t,
105 MPI2_POINTER pMpi2TargetCmdBufferPostBaseRequest_t;
107 /* values for the BufferPostflags field */
108 #define MPI2_CMD_BUF_POST_BASE_ADDRESS_SPACE_MASK (0x0C)
109 #define MPI2_CMD_BUF_POST_BASE_SYSTEM_ADDRESS_SPACE (0x00)
110 #define MPI2_CMD_BUF_POST_BASE_IOCDDR_ADDRESS_SPACE (0x04)
111 #define MPI2_CMD_BUF_POST_BASE_IOCPLB_ADDRESS_SPACE (0x08)
112 #define MPI2_CMD_BUF_POST_BASE_IOCPLBNTA_ADDRESS_SPACE (0x0C)
114 #define MPI2_CMD_BUF_POST_BASE_FLAGS_AUTO_POST_ALL (0x01)
117 /****************************************************************************
118 * Target Command Buffer Post List Request
119 ****************************************************************************/
121 typedef struct _MPI2_TARGET_CMD_BUF_POST_LIST_REQUEST
123 U16 Reserved; /* 0x00 */
124 U8 ChainOffset; /* 0x02 */
125 U8 Function; /* 0x03 */
126 U16 CmdBufferCount; /* 0x04 */
127 U8 Reserved1; /* 0x06 */
128 U8 MsgFlags; /* 0x07 */
131 U16 Reserved2; /* 0x0A */
132 U32 Reserved3; /* 0x0C */
133 U16 IoIndex[2]; /* 0x10 */
134 } MPI2_TARGET_CMD_BUF_POST_LIST_REQUEST,
135 MPI2_POINTER PTR_MPI2_TARGET_CMD_BUF_POST_LIST_REQUEST,
136 Mpi2TargetCmdBufferPostListRequest_t,
137 MPI2_POINTER pMpi2TargetCmdBufferPostListRequest_t;
139 /****************************************************************************
140 * Target Command Buffer Post Base List Reply
141 ****************************************************************************/
143 typedef struct _MPI2_TARGET_BUF_POST_BASE_LIST_REPLY
146 U8 Reserved; /* 0x01 */
147 U8 MsgLength; /* 0x02 */
148 U8 Function; /* 0x03 */
149 U16 Reserved1; /* 0x04 */
150 U8 Reserved2; /* 0x06 */
151 U8 MsgFlags; /* 0x07 */
154 U16 Reserved3; /* 0x0A */
155 U16 Reserved4; /* 0x0C */
156 U16 IOCStatus; /* 0x0E */
157 U32 IOCLogInfo; /* 0x10 */
158 U16 IoIndex; /* 0x14 */
159 U16 Reserved5; /* 0x16 */
160 U32 Reserved6; /* 0x18 */
161 } MPI2_TARGET_BUF_POST_BASE_LIST_REPLY,
162 MPI2_POINTER PTR_MPI2_TARGET_BUF_POST_BASE_LIST_REPLY,
163 Mpi2TargetCmdBufferPostBaseListReply_t,
164 MPI2_POINTER pMpi2TargetCmdBufferPostBaseListReply_t;
167 #define MPI2_CMD_BUF_POST_REPLY_IOINDEX_VALID (0x01)
170 /****************************************************************************
171 * Command Buffer Formats (with 16 byte CDB)
172 ****************************************************************************/
174 typedef struct _MPI2_TARGET_SSP_CMD_BUFFER
176 U8 FrameType; /* 0x00 */
177 U8 Reserved1; /* 0x01 */
178 U16 InitiatorConnectionTag; /* 0x02 */
179 U32 HashedSourceSASAddress; /* 0x04 */
180 U16 Reserved2; /* 0x08 */
181 U16 Flags; /* 0x0A */
182 U32 Reserved3; /* 0x0C */
184 U16 TargetPortTransferTag; /* 0x12 */
185 U32 DataOffset; /* 0x14 */
186 /* COMMAND information unit starts here */
187 U8 LogicalUnitNumber[8]; /* 0x18 */
188 U8 Reserved4; /* 0x20 */
189 U8 TaskAttribute; /* lower 3 bits */ /* 0x21 */
190 U8 Reserved5; /* 0x22 */
191 U8 AdditionalCDBLength; /* upper 5 bits */ /* 0x23 */
192 U8 CDB[16]; /* 0x24 */
193 /* Additional CDB bytes extend past the CDB field */
194 } MPI2_TARGET_SSP_CMD_BUFFER, MPI2_POINTER PTR_MPI2_TARGET_SSP_CMD_BUFFER,
195 Mpi2TargetSspCmdBuffer, MPI2_POINTER pMp2iTargetSspCmdBuffer;
197 typedef struct _MPI2_TARGET_SSP_TASK_BUFFER
199 U8 FrameType; /* 0x00 */
200 U8 Reserved1; /* 0x01 */
201 U16 InitiatorConnectionTag; /* 0x02 */
202 U32 HashedSourceSASAddress; /* 0x04 */
203 U16 Reserved2; /* 0x08 */
204 U16 Flags; /* 0x0A */
205 U32 Reserved3; /* 0x0C */
207 U16 TargetPortTransferTag; /* 0x12 */
208 U32 DataOffset; /* 0x14 */
209 /* TASK information unit starts here */
210 U8 LogicalUnitNumber[8]; /* 0x18 */
211 U16 Reserved4; /* 0x20 */
212 U8 TaskManagementFunction; /* 0x22 */
213 U8 Reserved5; /* 0x23 */
214 U16 ManagedTaskTag; /* 0x24 */
215 U16 Reserved6; /* 0x26 */
216 U32 Reserved7; /* 0x28 */
217 U32 Reserved8; /* 0x2C */
218 U32 Reserved9; /* 0x30 */
219 } MPI2_TARGET_SSP_TASK_BUFFER, MPI2_POINTER PTR_MPI2_TARGET_SSP_TASK_BUFFER,
220 Mpi2TargetSspTaskBuffer, MPI2_POINTER pMpi2TargetSspTaskBuffer;
222 /* mask and shift for HashedSourceSASAddress field */
223 #define MPI2_TARGET_HASHED_SAS_ADDRESS_MASK (0xFFFFFF00)
224 #define MPI2_TARGET_HASHED_SAS_ADDRESS_SHIFT (8)
227 /****************************************************************************
228 * MPI v2.0 Target Assist Request
229 ****************************************************************************/
231 typedef struct _MPI2_TARGET_ASSIST_REQUEST
233 U8 Reserved1; /* 0x00 */
234 U8 TargetAssistFlags; /* 0x01 */
235 U8 ChainOffset; /* 0x02 */
236 U8 Function; /* 0x03 */
237 U16 QueueTag; /* 0x04 */
238 U8 Reserved2; /* 0x06 */
239 U8 MsgFlags; /* 0x07 */
242 U16 Reserved3; /* 0x0A */
243 U16 IoIndex; /* 0x0C */
244 U16 InitiatorConnectionTag; /* 0x0E */
245 U16 SGLFlags; /* 0x10 */
246 U8 SequenceNumber; /* 0x12 */
247 U8 Reserved4; /* 0x13 */
248 U8 SGLOffset0; /* 0x14 */
249 U8 SGLOffset1; /* 0x15 */
250 U8 SGLOffset2; /* 0x16 */
251 U8 SGLOffset3; /* 0x17 */
252 U32 SkipCount; /* 0x18 */
253 U32 DataLength; /* 0x1C */
254 U32 BidirectionalDataLength; /* 0x20 */
255 U16 IoFlags; /* 0x24 */
256 U16 EEDPFlags; /* 0x26 */
257 U32 EEDPBlockSize; /* 0x28 */
258 U32 SecondaryReferenceTag; /* 0x2C */
259 U16 SecondaryApplicationTag; /* 0x30 */
260 U16 ApplicationTagTranslationMask; /* 0x32 */
261 U32 PrimaryReferenceTag; /* 0x34 */
262 U16 PrimaryApplicationTag; /* 0x38 */
263 U16 PrimaryApplicationTagMask; /* 0x3A */
264 U32 RelativeOffset; /* 0x3C */
265 U32 Reserved5; /* 0x40 */
266 U32 Reserved6; /* 0x44 */
267 U32 Reserved7; /* 0x48 */
268 U32 Reserved8; /* 0x4C */
269 MPI2_SGE_IO_UNION SGL[1]; /* 0x50 */
270 } MPI2_TARGET_ASSIST_REQUEST, MPI2_POINTER PTR_MPI2_TARGET_ASSIST_REQUEST,
271 Mpi2TargetAssistRequest_t, MPI2_POINTER pMpi2TargetAssistRequest_t;
273 /* Target Assist TargetAssistFlags bits */
275 #define MPI2_TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER (0x80)
276 #define MPI2_TARGET_ASSIST_FLAGS_TLR (0x10)
277 #define MPI2_TARGET_ASSIST_FLAGS_RETRANSMIT (0x04)
278 #define MPI2_TARGET_ASSIST_FLAGS_AUTO_STATUS (0x02)
279 #define MPI2_TARGET_ASSIST_FLAGS_DATA_DIRECTION (0x01)
281 /* Target Assist SGLFlags bits */
283 /* base values for Data Location Address Space */
284 #define MPI2_TARGET_ASSIST_SGLFLAGS_ADDR_MASK (0x0C)
285 #define MPI2_TARGET_ASSIST_SGLFLAGS_SYSTEM_ADDR (0x00)
286 #define MPI2_TARGET_ASSIST_SGLFLAGS_IOCDDR_ADDR (0x04)
287 #define MPI2_TARGET_ASSIST_SGLFLAGS_IOCPLB_ADDR (0x08)
288 #define MPI2_TARGET_ASSIST_SGLFLAGS_PLBNTA_ADDR (0x0C)
290 /* base values for Type */
291 #define MPI2_TARGET_ASSIST_SGLFLAGS_TYPE_MASK (0x03)
292 #define MPI2_TARGET_ASSIST_SGLFLAGS_MPI_TYPE (0x00)
293 #define MPI2_TARGET_ASSIST_SGLFLAGS_32IEEE_TYPE (0x01)
294 #define MPI2_TARGET_ASSIST_SGLFLAGS_64IEEE_TYPE (0x02)
296 /* shift values for each sub-field */
297 #define MPI2_TARGET_ASSIST_SGLFLAGS_SGL3_SHIFT (12)
298 #define MPI2_TARGET_ASSIST_SGLFLAGS_SGL2_SHIFT (8)
299 #define MPI2_TARGET_ASSIST_SGLFLAGS_SGL1_SHIFT (4)
300 #define MPI2_TARGET_ASSIST_SGLFLAGS_SGL0_SHIFT (0)
302 /* Target Assist IoFlags bits */
304 #define MPI2_TARGET_ASSIST_IOFLAGS_BIDIRECTIONAL (0x0800)
305 #define MPI2_TARGET_ASSIST_IOFLAGS_MULTICAST (0x0400)
306 #define MPI2_TARGET_ASSIST_IOFLAGS_RECEIVE_FIRST (0x0200)
308 /* Target Assist EEDPFlags bits */
310 #define MPI2_TA_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
311 #define MPI2_TA_EEDPFLAGS_INC_SEC_REFTAG (0x4000)
312 #define MPI2_TA_EEDPFLAGS_INC_PRI_APPTAG (0x2000)
313 #define MPI2_TA_EEDPFLAGS_INC_SEC_APPTAG (0x1000)
315 #define MPI2_TA_EEDPFLAGS_CHECK_REFTAG (0x0400)
316 #define MPI2_TA_EEDPFLAGS_CHECK_APPTAG (0x0200)
317 #define MPI2_TA_EEDPFLAGS_CHECK_GUARD (0x0100)
319 #define MPI2_TA_EEDPFLAGS_PASSTHRU_REFTAG (0x0008)
321 #define MPI2_TA_EEDPFLAGS_MASK_OP (0x0007)
322 #define MPI2_TA_EEDPFLAGS_NOOP_OP (0x0000)
323 #define MPI2_TA_EEDPFLAGS_CHECK_OP (0x0001)
324 #define MPI2_TA_EEDPFLAGS_STRIP_OP (0x0002)
325 #define MPI2_TA_EEDPFLAGS_CHECK_REMOVE_OP (0x0003)
326 #define MPI2_TA_EEDPFLAGS_INSERT_OP (0x0004)
327 #define MPI2_TA_EEDPFLAGS_REPLACE_OP (0x0006)
328 #define MPI2_TA_EEDPFLAGS_CHECK_REGEN_OP (0x0007)
331 /****************************************************************************
332 * MPI v2.5 Target Assist Request
333 ****************************************************************************/
335 typedef struct _MPI25_TARGET_ASSIST_REQUEST
337 U8 Reserved1; /* 0x00 */
338 U8 TargetAssistFlags; /* 0x01 */
339 U8 ChainOffset; /* 0x02 */
340 U8 Function; /* 0x03 */
341 U16 QueueTag; /* 0x04 */
342 U8 Reserved2; /* 0x06 */
343 U8 MsgFlags; /* 0x07 */
346 U16 Reserved3; /* 0x0A */
347 U16 IoIndex; /* 0x0C */
348 U16 InitiatorConnectionTag; /* 0x0E */
349 U8 DMAFlags; /* 0x10 */
350 U8 Reserved9; /* 0x11 */
351 U8 SequenceNumber; /* 0x12 */
352 U8 Reserved4; /* 0x13 */
353 U8 SGLOffset0; /* 0x14 */
354 U8 SGLOffset1; /* 0x15 */
355 U8 SGLOffset2; /* 0x16 */
356 U8 SGLOffset3; /* 0x17 */
357 U32 SkipCount; /* 0x18 */
358 U32 DataLength; /* 0x1C */
359 U32 BidirectionalDataLength; /* 0x20 */
360 U16 IoFlags; /* 0x24 */
361 U16 EEDPFlags; /* 0x26 */
362 U16 EEDPBlockSize; /* 0x28 */
363 U16 Reserved10; /* 0x2A */
364 U32 SecondaryReferenceTag; /* 0x2C */
365 U16 SecondaryApplicationTag; /* 0x30 */
366 U16 ApplicationTagTranslationMask; /* 0x32 */
367 U32 PrimaryReferenceTag; /* 0x34 */
368 U16 PrimaryApplicationTag; /* 0x38 */
369 U16 PrimaryApplicationTagMask; /* 0x3A */
370 U32 RelativeOffset; /* 0x3C */
371 U32 Reserved5; /* 0x40 */
372 U32 Reserved6; /* 0x44 */
373 U32 Reserved7; /* 0x48 */
374 U32 Reserved8; /* 0x4C */
375 MPI25_SGE_IO_UNION SGL; /* 0x50 */
376 } MPI25_TARGET_ASSIST_REQUEST, MPI2_POINTER PTR_MPI25_TARGET_ASSIST_REQUEST,
377 Mpi25TargetAssistRequest_t, MPI2_POINTER pMpi25TargetAssistRequest_t;
379 /* use MPI2_TARGET_ASSIST_FLAGS_ defines for the Flags field */
381 /* Defines for the DMAFlags field
382 * Each setting affects 4 SGLS, from SGL0 to SGL3.
388 #define MPI25_TA_DMAFLAGS_OP_MASK (0x0F)
389 #define MPI25_TA_DMAFLAGS_OP_D_D_D_D (0x00)
390 #define MPI25_TA_DMAFLAGS_OP_D_D_D_C (0x01)
391 #define MPI25_TA_DMAFLAGS_OP_D_D_D_I (0x02)
392 #define MPI25_TA_DMAFLAGS_OP_D_D_C_C (0x03)
393 #define MPI25_TA_DMAFLAGS_OP_D_D_C_I (0x04)
394 #define MPI25_TA_DMAFLAGS_OP_D_D_I_I (0x05)
395 #define MPI25_TA_DMAFLAGS_OP_D_C_C_C (0x06)
396 #define MPI25_TA_DMAFLAGS_OP_D_C_C_I (0x07)
397 #define MPI25_TA_DMAFLAGS_OP_D_C_I_I (0x08)
398 #define MPI25_TA_DMAFLAGS_OP_D_I_I_I (0x09)
399 #define MPI25_TA_DMAFLAGS_OP_D_H_D_D (0x0A)
400 #define MPI25_TA_DMAFLAGS_OP_D_H_D_C (0x0B)
401 #define MPI25_TA_DMAFLAGS_OP_D_H_D_I (0x0C)
402 #define MPI25_TA_DMAFLAGS_OP_D_H_C_C (0x0D)
403 #define MPI25_TA_DMAFLAGS_OP_D_H_C_I (0x0E)
404 #define MPI25_TA_DMAFLAGS_OP_D_H_I_I (0x0F)
406 /* defines for the IoFlags field */
407 #define MPI25_TARGET_ASSIST_IOFLAGS_BIDIRECTIONAL (0x0800)
408 #define MPI25_TARGET_ASSIST_IOFLAGS_RECEIVE_FIRST (0x0200)
410 /* defines for the EEDPFlags field */
411 #define MPI25_TA_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
412 #define MPI25_TA_EEDPFLAGS_INC_SEC_REFTAG (0x4000)
413 #define MPI25_TA_EEDPFLAGS_INC_PRI_APPTAG (0x2000)
414 #define MPI25_TA_EEDPFLAGS_INC_SEC_APPTAG (0x1000)
416 #define MPI25_TA_EEDPFLAGS_CHECK_REFTAG (0x0400)
417 #define MPI25_TA_EEDPFLAGS_CHECK_APPTAG (0x0200)
418 #define MPI25_TA_EEDPFLAGS_CHECK_GUARD (0x0100)
420 #define MPI25_TA_EEDPFLAGS_ESCAPE_MODE_MASK (0x00C0)
421 #define MPI25_TA_EEDPFLAGS_COMPATIBLE_MODE (0x0000)
422 #define MPI25_TA_EEDPFLAGS_DO_NOT_DISABLE_MODE (0x0040)
423 #define MPI25_TA_EEDPFLAGS_APPTAG_DISABLE_MODE (0x0080)
424 #define MPI25_TA_EEDPFLAGS_APPTAG_REFTAG_DISABLE_MODE (0x00C0)
426 #define MPI25_TA_EEDPFLAGS_HOST_GUARD_METHOD_MASK (0x0030)
427 #define MPI25_TA_EEDPFLAGS_T10_CRC_HOST_GUARD (0x0000)
428 #define MPI25_TA_EEDPFLAGS_IP_CHKSUM_HOST_GUARD (0x0010)
430 #define MPI25_TA_EEDPFLAGS_PASSTHRU_REFTAG (0x0008)
432 #define MPI25_TA_EEDPFLAGS_MASK_OP (0x0007)
433 #define MPI25_TA_EEDPFLAGS_NOOP_OP (0x0000)
434 #define MPI25_TA_EEDPFLAGS_CHECK_OP (0x0001)
435 #define MPI25_TA_EEDPFLAGS_STRIP_OP (0x0002)
436 #define MPI25_TA_EEDPFLAGS_CHECK_REMOVE_OP (0x0003)
437 #define MPI25_TA_EEDPFLAGS_INSERT_OP (0x0004)
438 #define MPI25_TA_EEDPFLAGS_REPLACE_OP (0x0006)
439 #define MPI25_TA_EEDPFLAGS_CHECK_REGEN_OP (0x0007)
442 /****************************************************************************
443 * Target Status Send Request
444 ****************************************************************************/
446 typedef struct _MPI2_TARGET_STATUS_SEND_REQUEST
448 U8 Reserved1; /* 0x00 */
449 U8 StatusFlags; /* 0x01 */
450 U8 ChainOffset; /* 0x02 */
451 U8 Function; /* 0x03 */
452 U16 QueueTag; /* 0x04 */
453 U8 Reserved2; /* 0x06 */
454 U8 MsgFlags; /* 0x07 */
457 U16 Reserved3; /* 0x0A */
458 U16 IoIndex; /* 0x0C */
459 U16 InitiatorConnectionTag; /* 0x0E */
460 U16 SGLFlags; /* 0x10 */ /* MPI v2.0 only. Reserved on MPI v2.5. */
461 U16 Reserved4; /* 0x12 */
462 U8 SGLOffset0; /* 0x14 */
463 U8 Reserved5; /* 0x15 */
464 U16 Reserved6; /* 0x16 */
465 U32 Reserved7; /* 0x18 */
466 U32 Reserved8; /* 0x1C */
467 MPI2_SIMPLE_SGE_UNION StatusDataSGE; /* 0x20 */ /* MPI v2.5: This must be an IEEE Simple Element 64. */
468 } MPI2_TARGET_STATUS_SEND_REQUEST,
469 MPI2_POINTER PTR_MPI2_TARGET_STATUS_SEND_REQUEST,
470 Mpi2TargetStatusSendRequest_t, MPI2_POINTER pMpi2TargetStatusSendRequest_t;
472 /* Target Status Send StatusFlags bits */
474 #define MPI2_TSS_FLAGS_REPOST_CMD_BUFFER (0x80)
475 #define MPI2_TSS_FLAGS_RETRANSMIT (0x04)
476 #define MPI2_TSS_FLAGS_AUTO_GOOD_STATUS (0x01)
478 /* Target Status Send SGLFlags bits - MPI v2.0 only */
479 /* Data Location Address Space */
480 #define MPI2_TSS_SGLFLAGS_ADDR_MASK (0x0C)
481 #define MPI2_TSS_SGLFLAGS_SYSTEM_ADDR (0x00)
482 #define MPI2_TSS_SGLFLAGS_IOCDDR_ADDR (0x04)
483 #define MPI2_TSS_SGLFLAGS_IOCPLB_ADDR (0x08)
484 #define MPI2_TSS_SGLFLAGS_IOCPLBNTA_ADDR (0x0C)
486 #define MPI2_TSS_SGLFLAGS_TYPE_MASK (0x03)
487 #define MPI2_TSS_SGLFLAGS_MPI_TYPE (0x00)
488 #define MPI2_TSS_SGLFLAGS_IEEE32_TYPE (0x01)
489 #define MPI2_TSS_SGLFLAGS_IEEE64_TYPE (0x02)
494 * NOTE: The SSP status IU is big-endian. When used on a little-endian system,
495 * this structure properly orders the bytes.
497 typedef struct _MPI2_TARGET_SSP_RSP_IU
499 U32 Reserved0[6]; /* reserved for SSP header */ /* 0x00 */
501 /* start of RESPONSE information unit */
502 U32 Reserved1; /* 0x18 */
503 U32 Reserved2; /* 0x1C */
504 U16 Reserved3; /* 0x20 */
505 U8 DataPres; /* lower 2 bits */ /* 0x22 */
506 U8 Status; /* 0x23 */
507 U32 Reserved4; /* 0x24 */
508 U32 SenseDataLength; /* 0x28 */
509 U32 ResponseDataLength; /* 0x2C */
511 /* start of Response or Sense Data (size may vary dynamically) */
512 U8 ResponseSenseData[4]; /* 0x30 */
513 } MPI2_TARGET_SSP_RSP_IU, MPI2_POINTER PTR_MPI2_TARGET_SSP_RSP_IU,
514 Mpi2TargetSspRspIu_t, MPI2_POINTER pMpi2TargetSspRspIu_t;
517 /****************************************************************************
518 * Target Standard Reply - used with Target Assist or Target Status Send
519 ****************************************************************************/
521 typedef struct _MPI2_TARGET_STANDARD_REPLY
523 U16 Reserved; /* 0x00 */
524 U8 MsgLength; /* 0x02 */
525 U8 Function; /* 0x03 */
526 U16 Reserved1; /* 0x04 */
527 U8 Reserved2; /* 0x06 */
528 U8 MsgFlags; /* 0x07 */
531 U16 Reserved3; /* 0x0A */
532 U16 Reserved4; /* 0x0C */
533 U16 IOCStatus; /* 0x0E */
534 U32 IOCLogInfo; /* 0x10 */
535 U16 IoIndex; /* 0x14 */
536 U16 Reserved5; /* 0x16 */
537 U32 TransferCount; /* 0x18 */
538 U32 BidirectionalTransferCount; /* 0x1C */
539 } MPI2_TARGET_STANDARD_REPLY, MPI2_POINTER PTR_MPI2_TARGET_STANDARD_REPLY,
540 Mpi2TargetErrorReply_t, MPI2_POINTER pMpi2TargetErrorReply_t;
543 /****************************************************************************
544 * Target Mode Abort Request
545 ****************************************************************************/
547 typedef struct _MPI2_TARGET_MODE_ABORT_REQUEST
549 U8 AbortType; /* 0x00 */
550 U8 Reserved1; /* 0x01 */
551 U8 ChainOffset; /* 0x02 */
552 U8 Function; /* 0x03 */
553 U16 Reserved2; /* 0x04 */
554 U8 Reserved3; /* 0x06 */
555 U8 MsgFlags; /* 0x07 */
558 U16 Reserved4; /* 0x0A */
559 U16 IoIndexToAbort; /* 0x0C */
560 U16 InitiatorDevHandle; /* 0x0E */
561 U32 MidToAbort; /* 0x10 */
562 } MPI2_TARGET_MODE_ABORT, MPI2_POINTER PTR_MPI2_TARGET_MODE_ABORT,
563 Mpi2TargetModeAbort_t, MPI2_POINTER pMpi2TargetModeAbort_t;
565 /* Target Mode Abort AbortType values */
567 #define MPI2_TARGET_MODE_ABORT_ALL_CMD_BUFFERS (0x00)
568 #define MPI2_TARGET_MODE_ABORT_ALL_IO (0x01)
569 #define MPI2_TARGET_MODE_ABORT_EXACT_IO (0x02)
570 #define MPI2_TARGET_MODE_ABORT_EXACT_IO_REQUEST (0x03)
571 #define MPI2_TARGET_MODE_ABORT_IO_REQUEST_AND_IO (0x04)
572 #define MPI2_TARGET_MODE_ABORT_DEVHANDLE (0x05)
573 #define MPI2_TARGET_MODE_ABORT_ALL_COMMANDS (0x06)
576 /****************************************************************************
577 * Target Mode Abort Reply
578 ****************************************************************************/
580 typedef struct _MPI2_TARGET_MODE_ABORT_REPLY
582 U16 Reserved; /* 0x00 */
583 U8 MsgLength; /* 0x02 */
584 U8 Function; /* 0x03 */
585 U16 Reserved1; /* 0x04 */
586 U8 Reserved2; /* 0x06 */
587 U8 MsgFlags; /* 0x07 */
590 U16 Reserved3; /* 0x0A */
591 U16 Reserved4; /* 0x0C */
592 U16 IOCStatus; /* 0x0E */
593 U32 IOCLogInfo; /* 0x10 */
594 U32 AbortCount; /* 0x14 */
595 } MPI2_TARGET_MODE_ABORT_REPLY, MPI2_POINTER PTR_MPI2_TARGET_MODE_ABORT_REPLY,
596 Mpi2TargetModeAbortReply_t, MPI2_POINTER pMpi2TargetModeAbortReply_t;