3 * Copyright (c) 2000-2009 LSI Corporation.
7 * Title: MPI SCSI initiator mode messages and structures
8 * Creation Date: June 23, 2006
10 * mpi2_init.h Version: 02.00.08
15 * Date Version Description
16 * -------- -------- ------------------------------------------------------
17 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
18 * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t.
19 * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines.
20 * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention.
21 * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
22 * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t.
23 * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO
24 * Control field Task Attribute flags.
25 * Moved LUN field defines to mpi2.h becasue they are
26 * common to many structures.
27 * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to
28 * Query Asynchronous Event.
29 * Defined two new bits in the SlotStatus field of the SCSI
30 * Enclosure Processor Request and Reply.
31 * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
32 * both SCSI IO Error Reply and SCSI Task Management Reply.
33 * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
34 * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
35 * --------------------------------------------------------------------------
41 /*****************************************************************************
43 * SCSI Initiator Messages
45 *****************************************************************************/
47 /****************************************************************************
48 * SCSI IO messages and associated structures
49 ****************************************************************************/
53 U8 CDB[20]; /* 0x00 */
54 U32 PrimaryReferenceTag; /* 0x14 */
55 U16 PrimaryApplicationTag; /* 0x18 */
56 U16 PrimaryApplicationTagMask; /* 0x1A */
57 U32 TransferLength; /* 0x1C */
58 } MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32,
59 Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t;
61 /* TBD: I don't think this is needed for MPI2/Gen2 */
65 U8 CDB[16]; /* 0x00 */
66 U32 DataLength; /* 0x10 */
67 U32 PrimaryReferenceTag; /* 0x14 */
68 U16 PrimaryApplicationTag; /* 0x18 */
69 U16 PrimaryApplicationTagMask; /* 0x1A */
70 U32 TransferLength; /* 0x1C */
71 } MPI2_SCSI_IO32_CDB_EEDP16, MPI2_POINTER PTR_MPI2_SCSI_IO32_CDB_EEDP16,
72 Mpi2ScsiIo32CdbEedp16_t, MPI2_POINTER pMpi2ScsiIo32CdbEedp16_t;
78 MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
79 MPI2_SGE_SIMPLE_UNION SGE;
80 } MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION,
81 Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t;
83 /* SCSI IO Request Message */
84 typedef struct _MPI2_SCSI_IO_REQUEST
86 U16 DevHandle; /* 0x00 */
87 U8 ChainOffset; /* 0x02 */
88 U8 Function; /* 0x03 */
89 U16 Reserved1; /* 0x04 */
90 U8 Reserved2; /* 0x06 */
91 U8 MsgFlags; /* 0x07 */
94 U16 Reserved3; /* 0x0A */
95 U32 SenseBufferLowAddress; /* 0x0C */
96 U16 SGLFlags; /* 0x10 */
97 U8 SenseBufferLength; /* 0x12 */
98 U8 Reserved4; /* 0x13 */
99 U8 SGLOffset0; /* 0x14 */
100 U8 SGLOffset1; /* 0x15 */
101 U8 SGLOffset2; /* 0x16 */
102 U8 SGLOffset3; /* 0x17 */
103 U32 SkipCount; /* 0x18 */
104 U32 DataLength; /* 0x1C */
105 U32 BidirectionalDataLength; /* 0x20 */
106 U16 IoFlags; /* 0x24 */
107 U16 EEDPFlags; /* 0x26 */
108 U32 EEDPBlockSize; /* 0x28 */
109 U32 SecondaryReferenceTag; /* 0x2C */
110 U16 SecondaryApplicationTag; /* 0x30 */
111 U16 ApplicationTagTranslationMask; /* 0x32 */
112 U8 LUN[8]; /* 0x34 */
113 U32 Control; /* 0x3C */
114 MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */
115 MPI2_SGE_IO_UNION SGL; /* 0x60 */
116 } MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST,
117 Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t;
119 /* SCSI IO MsgFlags bits */
121 /* MsgFlags for SenseBufferAddressSpace */
122 #define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C)
123 #define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00)
124 #define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04)
125 #define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08)
126 #define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C)
128 /* SCSI IO SGLFlags bits */
130 /* base values for Data Location Address Space */
131 #define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C)
132 #define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00)
133 #define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04)
134 #define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08)
135 #define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C)
137 /* base values for Type */
138 #define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03)
139 #define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00)
140 #define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01)
141 #define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02)
143 /* shift values for each sub-field */
144 #define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12)
145 #define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8)
146 #define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4)
147 #define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0)
149 /* SCSI IO IoFlags bits */
151 /* Large CDB Address Space */
152 #define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000)
153 #define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000)
154 #define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000)
155 #define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000)
156 #define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000)
158 #define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000)
159 #define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800)
160 #define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400)
161 #define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200)
162 #define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF)
164 /* SCSI IO EEDPFlags bits */
166 #define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
167 #define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000)
168 #define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000)
169 #define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000)
171 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400)
172 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200)
173 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100)
175 #define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008)
177 #define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007)
178 #define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000)
179 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001)
180 #define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002)
181 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003)
182 #define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004)
183 #define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006)
184 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007)
186 /* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */
188 /* SCSI IO Control bits */
189 #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000)
190 #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26)
192 #define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000)
193 #define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000)
194 #define MPI2_SCSIIO_CONTROL_WRITE (0x01000000)
195 #define MPI2_SCSIIO_CONTROL_READ (0x02000000)
196 #define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000)
198 #define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800)
199 #define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11)
201 #define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
202 #define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000)
203 #define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100)
204 #define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200)
205 #define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400)
207 #define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0)
208 #define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000)
209 #define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040)
210 #define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080)
213 /* SCSI IO Error Reply Message */
214 typedef struct _MPI2_SCSI_IO_REPLY
216 U16 DevHandle; /* 0x00 */
217 U8 MsgLength; /* 0x02 */
218 U8 Function; /* 0x03 */
219 U16 Reserved1; /* 0x04 */
220 U8 Reserved2; /* 0x06 */
221 U8 MsgFlags; /* 0x07 */
224 U16 Reserved3; /* 0x0A */
225 U8 SCSIStatus; /* 0x0C */
226 U8 SCSIState; /* 0x0D */
227 U16 IOCStatus; /* 0x0E */
228 U32 IOCLogInfo; /* 0x10 */
229 U32 TransferCount; /* 0x14 */
230 U32 SenseCount; /* 0x18 */
231 U32 ResponseInfo; /* 0x1C */
232 U16 TaskTag; /* 0x20 */
233 U16 Reserved4; /* 0x22 */
234 U32 BidirectionalTransferCount; /* 0x24 */
235 U32 Reserved5; /* 0x28 */
236 U32 Reserved6; /* 0x2C */
237 } MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY,
238 Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t;
240 /* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
242 #define MPI2_SCSI_STATUS_GOOD (0x00)
243 #define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02)
244 #define MPI2_SCSI_STATUS_CONDITION_MET (0x04)
245 #define MPI2_SCSI_STATUS_BUSY (0x08)
246 #define MPI2_SCSI_STATUS_INTERMEDIATE (0x10)
247 #define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
248 #define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
249 #define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /* obsolete */
250 #define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28)
251 #define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30)
252 #define MPI2_SCSI_STATUS_TASK_ABORTED (0x40)
254 /* SCSI IO Reply SCSIState flags */
256 #define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10)
257 #define MPI2_SCSI_STATE_TERMINATED (0x08)
258 #define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04)
259 #define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02)
260 #define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01)
262 /* masks and shifts for the ResponseInfo field */
264 #define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF)
265 #define MPI2_SCSI_RI_SHIFT_REASONCODE (0)
267 #define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF)
270 /****************************************************************************
271 * SCSI Task Management messages
272 ****************************************************************************/
274 /* SCSI Task Management Request Message */
275 typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST
277 U16 DevHandle; /* 0x00 */
278 U8 ChainOffset; /* 0x02 */
279 U8 Function; /* 0x03 */
280 U8 Reserved1; /* 0x04 */
281 U8 TaskType; /* 0x05 */
282 U8 Reserved2; /* 0x06 */
283 U8 MsgFlags; /* 0x07 */
286 U16 Reserved3; /* 0x0A */
287 U8 LUN[8]; /* 0x0C */
288 U32 Reserved4[7]; /* 0x14 */
289 U16 TaskMID; /* 0x30 */
290 U16 Reserved5; /* 0x32 */
291 } MPI2_SCSI_TASK_MANAGE_REQUEST,
292 MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST,
293 Mpi2SCSITaskManagementRequest_t,
294 MPI2_POINTER pMpi2SCSITaskManagementRequest_t;
296 /* TaskType values */
298 #define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
299 #define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02)
300 #define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
301 #define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
302 #define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
303 #define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
304 #define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
305 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09)
306 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A)
308 /* obsolete TaskType name */
309 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT)
313 #define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18)
314 #define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00)
315 #define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08)
316 #define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10)
318 #define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01)
322 /* SCSI Task Management Reply Message */
323 typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY
325 U16 DevHandle; /* 0x00 */
326 U8 MsgLength; /* 0x02 */
327 U8 Function; /* 0x03 */
328 U8 ResponseCode; /* 0x04 */
329 U8 TaskType; /* 0x05 */
330 U8 Reserved1; /* 0x06 */
331 U8 MsgFlags; /* 0x07 */
334 U16 Reserved2; /* 0x0A */
335 U16 Reserved3; /* 0x0C */
336 U16 IOCStatus; /* 0x0E */
337 U32 IOCLogInfo; /* 0x10 */
338 U32 TerminationCount; /* 0x14 */
339 U32 ResponseInfo; /* 0x18 */
340 } MPI2_SCSI_TASK_MANAGE_REPLY,
341 MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY,
342 Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t;
344 /* ResponseCode values */
346 #define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00)
347 #define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02)
348 #define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04)
349 #define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05)
350 #define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08)
351 #define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09)
352 #define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A)
353 #define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80)
355 /* masks and shifts for the ResponseInfo field */
357 #define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF)
358 #define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0)
359 #define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00)
360 #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8)
361 #define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000)
362 #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16)
363 #define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000)
364 #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24)
367 /****************************************************************************
368 * SCSI Enclosure Processor messages
369 ****************************************************************************/
371 /* SCSI Enclosure Processor Request Message */
372 typedef struct _MPI2_SEP_REQUEST
374 U16 DevHandle; /* 0x00 */
375 U8 ChainOffset; /* 0x02 */
376 U8 Function; /* 0x03 */
377 U8 Action; /* 0x04 */
379 U8 Reserved1; /* 0x06 */
380 U8 MsgFlags; /* 0x07 */
383 U16 Reserved2; /* 0x0A */
384 U32 SlotStatus; /* 0x0C */
385 U32 Reserved3; /* 0x10 */
386 U32 Reserved4; /* 0x14 */
387 U32 Reserved5; /* 0x18 */
389 U16 EnclosureHandle; /* 0x1E */
390 } MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST,
391 Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t;
394 #define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00)
395 #define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01)
398 #define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00)
399 #define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01)
401 /* SlotStatus defines */
402 #define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
403 #define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
404 #define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
405 #define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
406 #define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
407 #define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
408 #define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
409 #define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
410 #define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004)
411 #define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002)
412 #define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001)
415 /* SCSI Enclosure Processor Reply Message */
416 typedef struct _MPI2_SEP_REPLY
418 U16 DevHandle; /* 0x00 */
419 U8 MsgLength; /* 0x02 */
420 U8 Function; /* 0x03 */
421 U8 Action; /* 0x04 */
423 U8 Reserved1; /* 0x06 */
424 U8 MsgFlags; /* 0x07 */
427 U16 Reserved2; /* 0x0A */
428 U16 Reserved3; /* 0x0C */
429 U16 IOCStatus; /* 0x0E */
430 U32 IOCLogInfo; /* 0x10 */
431 U32 SlotStatus; /* 0x14 */
432 U32 Reserved4; /* 0x18 */
434 U16 EnclosureHandle; /* 0x1E */
435 } MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY,
436 Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t;
438 /* SlotStatus defines */
439 #define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
440 #define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
441 #define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
442 #define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
443 #define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
444 #define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
445 #define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
446 #define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
447 #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004)
448 #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002)
449 #define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001)