2 * Copyright (c) 2011, 2012 LSI Corp.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * LSI MPT-Fusion Host Adapter FreeBSD
32 * Copyright (c) 2000-2012 LSI Corporation.
36 * Title: MPI Serial Attached SCSI structures and definitions
37 * Creation Date: February 9, 2007
39 * mpi2_sas.h Version: 02.00.05
44 * Date Version Description
45 * -------- -------- ------------------------------------------------------
46 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
47 * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit
49 * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
51 * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
52 * to MPI2_SGE_IO_UNION since it supports chained SGLs.
53 * 05-12-10 02.00.04 Modified some comments.
54 * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control.
55 * --------------------------------------------------------------------------
62 * Values for SASStatus.
64 #define MPI2_SASSTATUS_SUCCESS (0x00)
65 #define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01)
66 #define MPI2_SASSTATUS_INVALID_FRAME (0x02)
67 #define MPI2_SASSTATUS_UTC_BAD_DEST (0x03)
68 #define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
69 #define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
70 #define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
71 #define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
72 #define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
73 #define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
74 #define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
75 #define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
76 #define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
77 #define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
78 #define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
79 #define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
80 #define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
81 #define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11)
82 #define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
83 #define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
84 #define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
88 * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
89 * data and SAS Configuration pages.
91 #define MPI2_SAS_DEVICE_INFO_SEP (0x00004000)
92 #define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
93 #define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
94 #define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
95 #define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
96 #define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
97 #define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
98 #define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
99 #define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
100 #define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
101 #define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
102 #define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
104 #define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
105 #define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
106 #define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
107 #define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
108 #define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
111 /*****************************************************************************
115 *****************************************************************************/
117 /****************************************************************************
118 * SMP Passthrough messages
119 ****************************************************************************/
121 /* SMP Passthrough Request Message */
122 typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST
124 U8 PassthroughFlags; /* 0x00 */
125 U8 PhysicalPort; /* 0x01 */
126 U8 ChainOffset; /* 0x02 */
127 U8 Function; /* 0x03 */
128 U16 RequestDataLength; /* 0x04 */
129 U8 SGLFlags; /* 0x06 */
130 U8 MsgFlags; /* 0x07 */
133 U16 Reserved1; /* 0x0A */
134 U32 Reserved2; /* 0x0C */
135 U64 SASAddress; /* 0x10 */
136 U32 Reserved3; /* 0x18 */
137 U32 Reserved4; /* 0x1C */
138 MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */
139 } MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
140 Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t;
142 /* values for PassthroughFlags field */
143 #define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
145 /* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
148 /* SMP Passthrough Reply Message */
149 typedef struct _MPI2_SMP_PASSTHROUGH_REPLY
151 U8 PassthroughFlags; /* 0x00 */
152 U8 PhysicalPort; /* 0x01 */
153 U8 MsgLength; /* 0x02 */
154 U8 Function; /* 0x03 */
155 U16 ResponseDataLength; /* 0x04 */
156 U8 SGLFlags; /* 0x06 */
157 U8 MsgFlags; /* 0x07 */
160 U16 Reserved1; /* 0x0A */
161 U8 Reserved2; /* 0x0C */
162 U8 SASStatus; /* 0x0D */
163 U16 IOCStatus; /* 0x0E */
164 U32 IOCLogInfo; /* 0x10 */
165 U32 Reserved3; /* 0x14 */
166 U8 ResponseData[4]; /* 0x18 */
167 } MPI2_SMP_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REPLY,
168 Mpi2SmpPassthroughReply_t, MPI2_POINTER pMpi2SmpPassthroughReply_t;
170 /* values for PassthroughFlags field */
171 #define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
173 /* values for SASStatus field are at the top of this file */
176 /****************************************************************************
177 * SATA Passthrough messages
178 ****************************************************************************/
180 /* SATA Passthrough Request Message */
181 typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST
183 U16 DevHandle; /* 0x00 */
184 U8 ChainOffset; /* 0x02 */
185 U8 Function; /* 0x03 */
186 U16 PassthroughFlags; /* 0x04 */
187 U8 SGLFlags; /* 0x06 */
188 U8 MsgFlags; /* 0x07 */
191 U16 Reserved1; /* 0x0A */
192 U32 Reserved2; /* 0x0C */
193 U32 Reserved3; /* 0x10 */
194 U32 Reserved4; /* 0x14 */
195 U32 DataLength; /* 0x18 */
196 U8 CommandFIS[20]; /* 0x1C */
197 MPI2_SGE_IO_UNION SGL; /* 0x30 */
198 } MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
199 Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t;
201 /* values for PassthroughFlags field */
202 #define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
203 #define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020)
204 #define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
205 #define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
206 #define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
207 #define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
209 /* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
212 /* SATA Passthrough Reply Message */
213 typedef struct _MPI2_SATA_PASSTHROUGH_REPLY
215 U16 DevHandle; /* 0x00 */
216 U8 MsgLength; /* 0x02 */
217 U8 Function; /* 0x03 */
218 U16 PassthroughFlags; /* 0x04 */
219 U8 SGLFlags; /* 0x06 */
220 U8 MsgFlags; /* 0x07 */
223 U16 Reserved1; /* 0x0A */
224 U8 Reserved2; /* 0x0C */
225 U8 SASStatus; /* 0x0D */
226 U16 IOCStatus; /* 0x0E */
227 U32 IOCLogInfo; /* 0x10 */
228 U8 StatusFIS[20]; /* 0x14 */
229 U32 StatusControlRegisters; /* 0x28 */
230 U32 TransferCount; /* 0x2C */
231 } MPI2_SATA_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REPLY,
232 Mpi2SataPassthroughReply_t, MPI2_POINTER pMpi2SataPassthroughReply_t;
234 /* values for SASStatus field are at the top of this file */
237 /****************************************************************************
238 * SAS IO Unit Control messages
239 ****************************************************************************/
241 /* SAS IO Unit Control Request Message */
242 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST
244 U8 Operation; /* 0x00 */
245 U8 Reserved1; /* 0x01 */
246 U8 ChainOffset; /* 0x02 */
247 U8 Function; /* 0x03 */
248 U16 DevHandle; /* 0x04 */
249 U8 IOCParameter; /* 0x06 */
250 U8 MsgFlags; /* 0x07 */
253 U16 Reserved3; /* 0x0A */
254 U16 Reserved4; /* 0x0C */
255 U8 PhyNum; /* 0x0E */
256 U8 PrimFlags; /* 0x0F */
257 U32 Primitive; /* 0x10 */
258 U8 LookupMethod; /* 0x14 */
259 U8 Reserved5; /* 0x15 */
260 U16 SlotNumber; /* 0x16 */
261 U64 LookupAddress; /* 0x18 */
262 U32 IOCParameterValue; /* 0x20 */
263 U32 Reserved7; /* 0x24 */
264 U32 Reserved8; /* 0x28 */
265 } MPI2_SAS_IOUNIT_CONTROL_REQUEST,
266 MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST,
267 Mpi2SasIoUnitControlRequest_t, MPI2_POINTER pMpi2SasIoUnitControlRequest_t;
269 /* values for the Operation field */
270 #define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
271 #define MPI2_SAS_OP_PHY_LINK_RESET (0x06)
272 #define MPI2_SAS_OP_PHY_HARD_RESET (0x07)
273 #define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
274 #define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A)
275 #define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
276 #define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
277 #define MPI2_SAS_OP_REMOVE_DEVICE (0x0D)
278 #define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E)
279 #define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F)
280 #define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14)
281 #define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15)
282 #define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)
284 /* values for the PrimFlags field */
285 #define MPI2_SAS_PRIMFLAGS_SINGLE (0x08)
286 #define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02)
287 #define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01)
289 /* values for the LookupMethod field */
290 #define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01)
291 #define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02)
292 #define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
295 /* SAS IO Unit Control Reply Message */
296 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY
298 U8 Operation; /* 0x00 */
299 U8 Reserved1; /* 0x01 */
300 U8 MsgLength; /* 0x02 */
301 U8 Function; /* 0x03 */
302 U16 DevHandle; /* 0x04 */
303 U8 IOCParameter; /* 0x06 */
304 U8 MsgFlags; /* 0x07 */
307 U16 Reserved3; /* 0x0A */
308 U16 Reserved4; /* 0x0C */
309 U16 IOCStatus; /* 0x0E */
310 U32 IOCLogInfo; /* 0x10 */
311 } MPI2_SAS_IOUNIT_CONTROL_REPLY,
312 MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY,
313 Mpi2SasIoUnitControlReply_t, MPI2_POINTER pMpi2SasIoUnitControlReply_t;