Every revision of twsi after the A20 have a bug where we need to
write again the control register after each interrupts. We also need
to add some delay before writing to this register, a simple read of the
same register does the job so do that.
Also fix the case when we have finish sending all the bytes, it only worked
for 1 byte transfer (the same kind that we do for talking to the PMIC on A20
boards).
While here add more debug messages and rework some of them.
This was tested by talking to a AT23C32 eeprom and a DS3231 RTC from an
H3 and A20 board.
(most of this by rillig@)
o lots of style and white-space cleanup
o lots more unit tests for variable modifiers
o simplified description of some functions
o str.c: refactor Str_Match
o var.c: debugging output for :@
constify VarModify parameter
fix :hash modifier on 16-bit platforms
remove unnecessary forward declarations
refactor ApplyModifier_SysV to have less indentation
simplify code for :E and :R
clean up code for :H and :T
refactor ApplyModifiers
* var.c: we need stdint.h on some platforms to get uint32_t
* unit-test/Makefile: we need to supress the specific error
for RE substitution error in modmisc, since it varies accross
different OS.
extres/syscon_generic: Make device quiet if not in boot verbose
On some boards there is a lot of of syscon node that are unused as
more specific drivers is probed before, no need to flood the console
for the mostly-unused generic ones.
Alan Somers [Wed, 8 Jul 2020 17:12:12 +0000 (17:12 +0000)]
geli: enable direct dispatch
geli does all of its crypto operations in a separate thread pool, so
g_eli_start, g_eli_read_done, and g_eli_write_done don't actually do very
much work. Enabling direct dispatch eliminates the g_up/g_down bottlenecks,
doubling IOPs on my system. This change does not affect the thread pool.
Merge commit 065fc1eafe7c from llvm git (by Richard Smith):
PR45521: Preserve the value kind when performing a standard
conversion sequence on a glvalue expression.
If the sequence is supposed to perform an lvalue-to-rvalue
conversion, then one will be specified as the first conversion in the
sequence. Otherwise, one should not be invented.
This should fix clang crashing with "can't implicitly cast lvalue to
rvalue with this cast kind", followed by "UNREACHABLE executed at
/usr/src/contrib/llvm-project/clang/lib/Sema/Sema.cpp:538!", when
building recent versions of Ceph, and the CPAN module SYBER/Date-5.2.0.
Reported by: Willem Jan Withagen <wjw@digiware.nl>, eserte12@yahoo.de
PR: 245530, 247812
MFC after: 3 days
Michael Tuexen [Wed, 8 Jul 2020 12:25:19 +0000 (12:25 +0000)]
Improve handling of PKTDROP chunks. This includes the input validation
to address two issues found by ossfuzz testing the userland stack:
* https://oss-fuzz.com/testcase-detail/5387560242380800
* https://oss-fuzz.com/testcase-detail/4887954068865024
and adding support for I-DATA chunks in addition to DATA chunks.
Rick Macklem [Wed, 8 Jul 2020 02:28:08 +0000 (02:28 +0000)]
Add support for ext_pgs mbufs to nfsm_uiombuf().
This patch uses a slightly different algorithm for the non-ext_pgs case,
where a variable called "mcp" is maintained, pointing to the current
location that mbuf data can be filled into. This avoids use of
mtod(mp, char *) + mp->m_len to calculate the location, since this does
not work for ext_pgs mbufs and I think it makes the algorithm more readable.
This change should not result in semantic changes for the non-ext_pgs case.
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Since ND_EXTPG is never set yet, there is no semantic change at this time.
Toomas Soome [Tue, 7 Jul 2020 12:24:40 +0000 (12:24 +0000)]
loader: geli_dev_ioctl does return huge mediasize
The DIOCGMEDIASIZE is calculated md->md_sectorsize * md->md_provsize, and
for boot disk, the md_sectorsize is 4k. However, the md_provsize is already
in units of bytes.
Stefan Eßer [Tue, 7 Jul 2020 07:51:09 +0000 (07:51 +0000)]
Update to version 3.1.1
This version fixes a regression with regard to tradtional behavior of the
non-standard FreeBSD option "-e". In the previous version "-e quit" caused
bc to exit before any computations had been performed, since all -e option
parameters were concatenated and parsed as a whole, with quit causing the
program to exit as soon as it was parsed. This version parses and executes
commands passed with -e one by one and only exits after all prior commands
have been executed.
This commit is not a SVN merge, since the vendor import had been performed
after the import to contrib. Instead the contents of contrib/bc has been
removed and the new version is copied over unchanged from vendor/bc/dist.
Stefan Eßer [Tue, 7 Jul 2020 07:02:33 +0000 (07:02 +0000)]
Update to release 3.1.1
This release fixes a regression from traditional bc behavior in FreeBSD
with regard to "-e quit" being passed on the command line and add Spanish
message catalogs.
Rick Macklem [Tue, 7 Jul 2020 00:42:23 +0000 (00:42 +0000)]
Add support for ext_pgs mbufs to nfsrvd_rephead().
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Since ND_EXTPG is never set yet, there is no semantic change at this time.
Brooks Davis [Mon, 6 Jul 2020 22:39:42 +0000 (22:39 +0000)]
Fix a Wvoid-pointer-to-enum-cast warning missed in r359978.
This pattern is used in callbacks with void * data arguments and seems
both relatively uncommon and relatively harmless. Silence the warning
by casting through uintptr_t.
This warning is on by default in Clang 11.
MFC after: 3 days
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24425
riscv plic: Do not complete interrupts until the interrupt handler has run
We cannot complete the interrupt (i.e. write to the claims/complete register
until the interrupt handler has actually run. We don't run the interrupt
handler immediately from intr_isrc_dispatch(), we only schedule it for later
execution.
If we immediately complete it (i.e. before the interrupt handler proper has
run) the interrupt may be triggered again if the interrupt source remains set.
From RISC-V Instruction Set Manual: Volume II: Priviliged Architecture, 7.4
Interrupt Gateways:
"If a level-sensitive interrupt source deasserts the interrupt after the PLIC
core accepts the request and before the interrupt is serviced, the interrupt
request remains present in the IP bit of the PLIC core and will be serviced by
a handler, which will then have to determine that the interrupt device no
longer requires service."
In other words, we may receive interrupts twice.
Avoid that by postponing the completion until after the interrupt handler has
run.
If the interrupt is handled by a filter rather than by scheduling an interrupt
thread we must also complete the interrupt, so set up a post_filter handler
(which is the same as the post_ithread handler).
Mark Johnston [Mon, 6 Jul 2020 21:20:57 +0000 (21:20 +0000)]
Split nhop_ref_object().
Now nhop_ref_object() unconditionally acquires a reference, and the new
nhop_try_ref_object() uses refcount_acquire_if_not_zero() to
conditionally acquire a reference. Since the former is cheaper, use it
when we know that the initial counter value is non-zero. No functional
change intended.
This implementation doesn't have any major deviations from the other EFI
ports. I've copied the boilerplate from arm and arm64.
I've tested this with the following boot flows:
OpenSBI (M-mode) -> u-boot (S-mode) -> loader.efi -> FreeBSD
OpenSBI (M-mode) -> u-boot (S-mode) -> boot1.efi -> loader.efi -> FreeBSD
Due to the way that u-boot handles secondary CPUs, OpenSBI >= v0.7 is required,
as the HSM extension is needed to bring them up explicitly. Because of this,
using BBL as the SBI implementation will not be possible. Additionally, there
are a few recent u-boot changes that are required as well, all of which will be
present in the upcoming v2020.07 release.
Mark Johnston [Mon, 6 Jul 2020 16:34:09 +0000 (16:34 +0000)]
Allow accesses of the caller's CPU and domain sets in capability mode.
cpuset_(get|set)(affinity|domain)(2) permit a get or set of the calling
thread or process' CPU and domain set in capability mode, but only when
the thread or process ID is specified as -1. Extend this to cover the
case where the ID actually matches the caller's TID or PID, since some
code, such as our pthread_attr_get_np() implementation, always provides
an explicit ID.
It was not and still is not permitted to access CPU and domain sets for
other threads in the same process when the process is in capability
mode. This might change in the future.
Mark Johnston [Mon, 6 Jul 2020 16:33:21 +0000 (16:33 +0000)]
Lift cpuset Capsicum checks into a subroutine.
Otherwise the same checks are duplicated across four different system
call implementations, cpuset_(get|set)(affinity|domain)(). No
functional change intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Mark Johnston [Mon, 6 Jul 2020 14:52:21 +0000 (14:52 +0000)]
iflib: Fix some nits in the rx refill code.
- Get rid of the ifl_vm_addrs array. It is not used by any existing
consumer, so we are just dirtying a couple of cache lines for no
reason.
- Use uma_zalloc(fl->ifl_zone) instead of m_cljget(). Otherwise
m_cljget() is doing unnecessary work to look up the correct zone, when
iflib already knows what that zone is.
- ifl_gen is only used when INVARIANTS is on, so make that more clear.
- Fix some style nits and inconsistencies.
Reviewed by: gallatin
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25490
Mark Johnston [Mon, 6 Jul 2020 14:52:09 +0000 (14:52 +0000)]
iflib: Fix handling of mbuf cluster allocation failures.
When refilling an rx freelist, make sure we only update the hardware
producer index if at least one cluster was allocated. Otherwise the
NIC is programmed to write a previously used cluster, typically
resulting in a use-after-free when packet data is written by the
hardware.
Also make sure that we don't update the fragment index cursor if the
last allocation attempt didn't succeed. For at least Intel drivers,
iflib assumes that the consumer index and fragment index cursor stay in
lockstep, but this assumption was violated in the face of cluster
allocation failures.
Reported and tested by: pho
Reviewed by: gallatin, hselasky
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25489
In the last IFUNC related changes to rtld, the code that handled non-PLT
GNU IFUNC relocations ended up getting lost. This could leave some
relocations unhandled, causing crashes or misbehavior. This change restores
the handling of these relocations, but now together with the other IFUNC
relocations, allowing resolvers to reference external symbols.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D25550
Andrew Turner [Mon, 6 Jul 2020 08:51:55 +0000 (08:51 +0000)]
Add a driver for bcm2838 PCI express controller
This adds support for the Broadcom bcm2711 PCI express controller, found
on the Raspberry Pi 4 (aka the bcm2838 SoC). The driver has only been
developed against the soldered-on VIA XHCI controller and not tested
with other end points.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25068
Infiniband clients must be attached and detached in a specific order in ibcore.
Currently the linking order of the infiniband, IB, modules decide in which
order the clients are attached and detached. For example one IB client may
use resources from another IB client. This can lead to a potential deadlock
at shutdown. For example if the ipoib is unregistered after the ib_multicast
client is detached, then if ipoib is using multicast addresses a deadlock may
happen, because ib_multicast will wait for all its resources to be freed before
returning from the remove method.
Fix this by using module_xxx_order() instead of module_xxx().
Rick Macklem [Sun, 5 Jul 2020 21:55:16 +0000 (21:55 +0000)]
Add support for ext_pgs mbufs to nfsm_strtom().
Also, add a new function nfsm_add_ext_pgs() which will either add a page
or add a new ext_pgs mbuf with a page to the mbuf list. Used by nfsm_strtom().
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Since ND_EXTPG is never set yet, there is no semantic change at this time.
Andrew Turner [Sun, 5 Jul 2020 14:38:22 +0000 (14:38 +0000)]
Rerun kernel ifunc resolvers after all CPUs have started
On architectures that use RELA relocations it is safe to rerun the ifunc
resolvers on after all CPUs have started, but while they are sill parked.
On arm64 with big.LITTLE this is needed as some SoCs have shipped with
different ID register values the big and little clusters meaning we were
unable to rely on the register values from the boot CPU.
Add support for rerunning the resolvers on arm64 and amd64 as these are
both RELA using architectures.
Reviewed by: kib
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25455
Xin LI [Sat, 4 Jul 2020 18:37:04 +0000 (18:37 +0000)]
Gather writes to larger chunks (MAXPHYS) instead of issuing them in
sectors.
On my SanDisk Cruzer Blade 16GB USB stick this made formatting much faster:
x before
+ after
+--------------------------------------------------------------------------+
|+ |
|+ x |
|+ x x|
|A MA||
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 15.89 16.38 16 16.09 0.2570992
+ 3 0.32 0.37 0.35 0.34666667 0.025166115
Difference at 95.0% confidence
-15.7433 +/- 0.414029
-97.8455% +/- 0.25668%
(Student's t, pooled s = 0.182665)
Make linprocfs(5) create /proc/bus/pci/devices/, and linsysfs(5)
create /sys/class/power_supply/. This silences some warnings
from biology/linux-foldingathome.
Reported by: 0mp
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25557
Rick Macklem [Sat, 4 Jul 2020 03:28:13 +0000 (03:28 +0000)]
Add support for ext_pgs mbufs to nfscl_reqstart() and nfsm_set().
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Since ND_EXTPG is never set yet, there is no semantic change at this time.
Add domain policy allocation for amd64 fpu_kern_ctx
Like other types of allocation, fpu_kern_ctx are frequently allocated per-cpu.
Provide the API and sketch some example consumers.
fpu_kern_alloc_ctx_domain() preferentially allocates memory from the
provided domain, and falls back to other domains if that one is empty
(DOMAINSET_PREF(domain) policy).
Maybe it makes more sense to just shove one of these in the DPCPU area
sooner or later -- left for future work.
They trigger for some people, the bug is not obvious, there are no takers
for fixing it, the issue already had to be there for years beforehand and
is low priority.
cxgbe(4): changes in the Tx path to help increase tx coalescing.
- Ask the firmware for the number of frames that can be stuffed in one
work request.
- Modify mp_ring to increase the likelihood of tx coalescing when there
are just one or two threads that are doing most of the tx. Add teeth
to the abdication mechanism by pushing the consumer lock into mp_ring.
This reduces the likelihood that a consumer will get stuck with all
the work even though it is above its budget.
- Add support for coalesced tx WR to the VF driver. This, with the
changes above, results in a 7x improvement in the tx pps of the VF
driver for some common cases. The firmware vets the L2 headers
submitted by the VF driver and it's a big win if the checks are
performed for a batch of packets and not each one individually.
Rick Macklem [Fri, 3 Jul 2020 01:19:29 +0000 (01:19 +0000)]
Add support for ext_pgs mbufs to nfsm_build().
This is the first of a series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Since ND_EXTPG is never set yet, there is no semantic change at this time.
Alan Somers [Thu, 2 Jul 2020 13:17:31 +0000 (13:17 +0000)]
Fix page fault in zfsctl_snapdir_getattr
Must acquire the z_teardown_lock before accessing the zfsvfs_t object. I
can't reproduce this panic on demand, but this looks like the correct
solution.
The top 10 bits of a pte are reserved by specification[1] and are not part of
the PPN.
[1] 'Volume II: RISC-V Privileged Architectures V20190608-Priv-MSU-Ratified',
'4.4.1 Addressing and Memory Protection', page 72: "The PTE format for Sv39 is
shown in Figure 4.18. ... Bits 63–54 are reserved for future use and must be
zeroed by software for forward compatibility."
projects / FreeBSD / FreeBSD.git / log