sevan [Sun, 16 Oct 2016 23:28:58 +0000 (23:28 +0000)]
MFC r306724:
Add history section for bsdlabel(8)
http://minnie.tuhs.org/cgi-bin/utree.pl?file=4.3BSD-Tahoe/usr/man/cat8/disklabel.0
Remove tab after space, highlighted by igor
sevan [Sun, 16 Oct 2016 23:09:04 +0000 (23:09 +0000)]
MFC r306718:
Add history section for echo(1)
Sourced using the draft copy of the second edition manual
http://www.tuhs.org/Archive/PDP-11/Distributions/research/1972_stuff/unix_2nd_edition_manual.pdf
sevan [Sun, 16 Oct 2016 22:22:46 +0000 (22:22 +0000)]
MFC r306611:
Amend history to mention predecessor originated from 386BSD[1] & current implementation from NetBSD[2].
Reword history since the utility was renamed once more in FreeBSD 5.0.
Separate out author & historical information regarding character code conversion.
Add AUTHORS section.
arybchik [Sat, 15 Oct 2016 13:45:12 +0000 (13:45 +0000)]
MFC r307038
sfxge(4): update external port mapping for Medford
Extend the mapping table for external port numbering to support port modes
which output to the second external port only. Where supported, map from
the current port mode rather than inferring from all the available modes.
Updated comments for clarity.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
bapt [Sat, 15 Oct 2016 12:38:21 +0000 (12:38 +0000)]
MFC r306852
Incorporate a change from OpenBSD by millert@OpenBSD.org
Don't warn about valid time zone abbreviations. POSIX
through 2000 says that an abbreviation cannot start with ':', and
cannot contain ',', '-', '+', NUL, or a digit. POSIX from 2001
on changes this rule to say that an abbreviation can contain only
'-', '+', and alphanumeric characters from the portable character
set in the current locale. To be portable to both sets of rules,
an abbreviation must therefore use only ASCII letters." Adapted
from tzcode2015f.
This is needed to be able to update tzdata to a newer version
5959 clean up per-dataset feature count code
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
This patch simply removes this macro from dsl_dataset.h.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
mav [Fri, 14 Oct 2016 07:45:10 +0000 (07:45 +0000)]
MFC r305561: MFV r305560:
7278 tuning zfs_arc_max does not impact arc_c_min
When changing zfs_arc_max (e.g. as zdb does), it may be set to less
than the default arc_c_min. arc_c_min should decrease to not be more than
arc_c_max, but it doesn't; therefore tuning of arc_c_max is ineffective.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
mav [Fri, 14 Oct 2016 07:40:20 +0000 (07:40 +0000)]
MFC r305340: MFC r305337:
7004 dmu_tx_hold_zap() does dnode_hold() 7x on same object
Using a benchmark which has 32 threads creating 2 million files in the
same directory, on a machine with 16 CPU cores, I observed poor
performance. I noticed that dmu_tx_hold_zap() was using about 30% of
all CPU, and doing dnode_hold() 7 times on the same object (the ZAP
object that is being held).
dmu_tx_hold_zap() keeps a hold on the dnode_t the entire time it is
running, in dmu_tx_hold_t:txh_dnode, so it would be nice to use the
dnode_t that we already have in hand, rather than repeatedly calling
dnode_hold(). To do this, we need to pass the dnode_t down through
all the intermediate calls that dmu_tx_hold_zap() makes, making these
routines take the dnode_t* rather than an objset_t* and a uint64_t
object number. In particular, the following routines will need to have
analogous *_by_dnode() variants created:
This can improve performance on the benchmark described above by 100%,
from 30,000 file creations per second to 60,000. (This improvement is on
top of that provided by working around the object allocation issue. Peak
performance of ~90,000 creations per second was observed with 8 CPUs;
adding CPUs past that decreased performance due to lock contention.) The
CPU used by dmu_tx_hold_zap() was reduced by 88%, from 340 CPU-seconds
to 40 CPU-seconds.
Sponsored by: Intel Corp.
Closes #109
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Author: Matthew Ahrens <mahrens@delphix.com>
This resolves two 'zfs recv' issues. First, when receiving into an
existing filesystem, a snapshot created during the receive process is
not added to the guid->dataset map for the stream, resulting in failed
lookups for deduped streams when a WRITE_BYREF record refers to a
snapshot received earlier in the stream. Second, the newly created
snapshot was also not set properly, referencing the snapshot before the
new receiving dataset rather than the existing filesystem.
Closes #159
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Author: Chris Williamson <chris.williamson@delphix.com>
mav [Fri, 14 Oct 2016 07:35:43 +0000 (07:35 +0000)]
MFC r305338: MFV r305335: 7003 zap_lockdir() should tag hold
zap_lockdir() / zap_unlockdir() should take a "void *tag" argument which
tags the hold on the zap. This will help diagnose programming errors
which misuse the hold on the ZAP.
Sponsored by: Intel Corp.
Closes #108
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Author: Matthew Ahrens <mahrens@delphix.com>
https://www.illumos.org/issues/7230
A test failure occurred where a send stream had only a BEGIN record. This
should not be possible if the send returns without error. Prevented this from
happening in the future by adding an assertion to dmu_send_impl() to verify
that if the function returns 0 (success) both a BEGIN and END record are
present. Did this by adding flags to dmu_sendarg_t (indicating whether BEGIN o
r
END records sent), having dump_record() set flags appropriately, adding VERIFY
statement to dmu_send_impl().
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matt Krantz <matt.krantz@delphix.com>
https://www.illumos.org/issues/7235
The function dsl_dataset_set_blkptr() is unused. We should remove it.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
https://www.illumos.org/issues/7277
ztest always prints the debug messages (zfs_dbgmsg()) by calling
zfs_dbgmsg_print(). We should add a flag to zdb to make it do this as well
before exiting.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
https://www.illumos.org/issues/7090
When write I/Os are issued, they are issued in block order but the ZIO pipelin
e
will drive them asynchronously through the allocation stage which can result i
n
blocks being allocated out-of-order. It would be nice to preserve as much of
the logical order as possible.
In addition, the allocations are equally scattered across all top-level VDEVs
but not all top-level VDEVs are created equally. The pipeline should be able t
o
detect devices that are more capable of handling allocations and should
allocate more blocks to those devices. This allows for dynamic allocation
distribution when devices are imbalanced as fuller devices will tend to be
slower than empty devices.
The change includes a new pool-wide allocation queue which would throttle and
order allocations in the ZIO pipeline. The queue would be ordered by issued
time and offset and would provide an initial amount of allocation of work to
each top-level vdev. The allocation logic utilizes a reservation system to
reserve allocations that will be performed by the allocator. Once an allocatio
n
is successfully completed it's scheduled on a given top-level vdev. Each top-
level vdev maintains a maximum number of allocations that it can handle
(mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels *
mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab
groups and round robin across all eligible metaslab groups to distribute the
work. As top-levels complete their work, they receive additional work from the
pool-wide allocation queue until the allocation queue is emptied.
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: George Wilson <george.wilson@delphix.com>
https://www.illumos.org/issues/7163
Running zloop from zfs-precommit hit this assertion:
*panicstr/s
0xfffffd7fd7419370: assertion failed for thread 0xfffffd7fe29ed240,
thread-id 577: parent != NULL, file ../../../uts/common/fs/zfs/dbuf.c, line
1827
$c
libc.so.1`_lwp_kill+0xa()
libc.so.1`_assfail+0x182(fffffd7ffb1c29fa, fffffd7ffb1cc028, 723)
libc.so.1`assfail+0x19(fffffd7ffb1c29fa, fffffd7ffb1cc028, 723)
libzpool.so.1`dbuf_dirty+0xc69(10e3bc10, 3601700)
libzpool.so.1`dbuf_dirty+0x61e(10c73640, 3601700)
libzpool.so.1`dbuf_dirty+0x61e(10e28280, 3601700)
libzpool.so.1`dmu_buf_will_fill+0x64(10e28280, 3601700)
libzpool.so.1`dmu_write+0x1b6(2c7e640, d, 400000002e000000, 200, 3717b40, 3601700)
ztest_replay_write+0x568(4950d0, 3717a80, 0)
ztest_write+0x125(4950d0, d, 400000002e000000, 200, 413f000)
ztest_io+0x1bb(4950d0, d, 400000002e000000)
ztest_dmu_write_parallel+0xaa(4950d0, 6)
ztest_execute+0x83(1, 420c98, 6)
ztest_thread+0xf4(6)
libc.so.1`_thrp_setup+0x8a(fffffd7fe29ed240)
libc.so.1`_lwp_start()
This is another manifestation of ECKSUM in ztest:
The lowest level ancestor that’s in memory is the L8 (topmost). The L7
ancestor is blkid 0x10:
::dbufs -O 0x2c7e640 -o d -l 7 |::dbuf
addr object lvl blkid holds os 600be50 d 7 4 1 ztest/ds_6 719d880 d 7 0 4 ztest/ds_6
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
https://www.illumos.org/issues/6451
Sometimes ztest fails because zdb detects checksum errors. e.g.:
Traversing all blocks to verify checksums and verify nothing leaked ...
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 8000160> DVA0=<0:1cc2000:
180000> [L0 other uint64[]] sha256 uncompressed LE contiguou
s unique single size=100000L/100000P birth=271L/271P fill=1
cksum=c5a3e27d1ed0f894:843bca3a5473c4bf:f76a19b6830a2e4:91292591613a12bf --
skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 800000180> DVA0=<0:ce16800:
180000> [L0 other uint64[]] sha256 uncompressed LE contigu
ous unique single size=100000L/100000P birth=840L/840P fill=1
cksum=5d018f3d061e17f3:6d1584784587bf63:2805a74a0ce37369:ba68a214806c7e75
-- skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 1000000360> DVA0=<0:10d37400:
180000> [L0 other uint64[]] sha256 uncompressed LE conti
guous unique single size=100000L/100000P birth=904L/904P fill=1
cksum=fa1e11d4138bd14b:86c9488c444473e3:f31e43c72e72e46b:e3446472d1174d
ba -- skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 400000002c0> DVA0=<0:127ef400:
180000> [L0 other uint64[]] sha256 uncompressed LE cont
iguous dedup single size=100000L/100000P birth=549L/549P fill=1
cksum=30e14955ebf13522:66dc2ff8067e6810:4607e750abb9d3b3:6582b8af909fcb
58 -- skipping
zdb_blkptr_cb: Got error 50 reading <657, 5, 0, 1c0> DVA0=<0:1a180400:180000>
[L0 other uint64[]] fletcher4 uncompressed LE contiguou
s unique single size=100000L/100000P birth=1091L/1091P fill=1 cksum=a6cf1e50: 29b3bd01c57e5:36779b914035db9a:db61cdcf6bec56f0 -- skippin
g
The problem is that ztest_fault_inject() can inject multiple faults into the
same block. It is designed such that it can inject errors on all leafs of a
RAID-Z or mirror, but for a given range of offsets, it will only inject errors
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Jorgen Lundman <lundman@lundman.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: George Wilson <george.wilson@delphix.com>
https://www.illumos.org/issues/7086
In dbuf_dirty(), we need to grab the dn_struct_rwlock before looking at the
db_blkptr, to prevent it from being changed by syncing context.
Otherwise we may see that ztest got a segfault from this stack:
libzpool.so.1`dva_get_dsize_sync+0x98(872f000, b32b240, fed7811b, 0, b4cda20,
0)
libzpool.so.1`bp_get_dsize+0x60(872f000, b32b240, 0, 97cb780, 9d4c1a8, 0)
libzpool.so.1`dbuf_dirty+0x9b3(ce0a100, 97cb780, 9, fecd2530)
libzpool.so.1`dmu_buf_will_dirty+0xc3(ce0a100, 97cb780, ea293d6c, 1)
libzpool.so.1`zap_lockdir+0x1a0(8aaa3c0, 1, 0, 97cb780, 1, 1)
libzpool.so.1`zap_remove_norm+0x30(8aaa3c0, 1, 0, 8728b10, 0, 97cb780)
libzpool.so.1`zap_remove+0x29(8aaa3c0, 1, 0, 8728b10, 97cb780, a)
ztest_replay_remove+0x225(ea294588, 8728ae8, 0, 38010000, 0, 0)
ztest_remove+0x9f(ea294588, ea293f50, 4, 3)
ztest_object_init+0x78(ea294588, ea293f50, 4e0, 1)
ztest_dmu_object_alloc_free+0x71(ea294588, 13)
ztest_dmu_objset_create_destroy+0x224(80cef08, 13, 0, 805d36c, 9017ad44, 0)
ztest_execute+0x89(a, 807c720, 13, 0)
ztest_thread+0xea(13, 0, 0, 0)
libc.so.1`_thrp_setup+0x88(f0983240)
libc.so.1`_lwp_start(f0983240, 0, 0, 0, 0, 0)
Looking into it a bit, we see that this is an embedded blockpointer, so
BP_GET_NDVAS should have returned 0: b32b240::blkptr
EMBEDDED [L0 ZAP_OTHER] et=0 LZ4 size=200L/4aP birth=80L
Instead, it looks like another thread is modifying this blockpointer: b32b240::ugrep | ::whatis f47a0e0c is in [ stack tid=0x19f ] ebd6ec40 is in [ stack tid=0x226 ] ea293bd0 is in [ stack tid=0x244 ] ea293be4 is in [ stack tid=0x244 ]
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
https://www.illumos.org/issues/7072
upstream:
38733 zfs fails to expand if lun added when os is in shutdown state
DLPX-36910 spares and caches should not display expandable space
DLPX-39262 vdev_disk_open spam zfs_dbgmsg buffer
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: George Wilson <george.wilson@delphix.com>
https://www.illumos.org/issues/6950
When reading compressed data from disk, the ARC should keep the compressed
block cached and only decompress it when consumers access the block. The
uncompressed data should be short-lived allowing the ARC to cache a much large
r
amount of data. The DMU would also maintain a smaller cache of uncompressed
blocks to minimize the impact of decompressing frequently accessed blocks.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
sephe [Fri, 14 Oct 2016 03:22:19 +0000 (03:22 +0000)]
MFC 306426
hyperv/storvsc: Fix the blkvsc disk attachment issues.
- The original 'disengage' ATA controller model does not work properly
for all possible disk configurations. Use the newly added ATA disk
veto eventhandler to fit into all possible disk configuration.
- If the 'invalid LUN' happens on blkvsc controllers, return
CAM_DEV_NOT_THERE so that CAM will not destroy attached disks under
the blkvsc controllers.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Discussed with: mav
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7693
sephe [Fri, 14 Oct 2016 02:52:48 +0000 (02:52 +0000)]
MFC 306390-306392
306390
hyperv/hn: Suspend and resume the backend properly upon MTU change.
Suspend:
- Prevent the backend from being touched on TX path.
- Clear the RNDIS RX filter, and wait for RX to drain.
- Make sure that NVS see the chimney sending buffer and RXBUF
disconnection, before unlink these buffers from the channel.
Resume:
- Reconfigure the RNDIS filter.
- Allow TX path to work on the backend.
- Kick start the TX eof task, in case the OACTIVE is set.
This fixes various panics, when the interface has traffic and MTU
is being changed.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8046
306391
hyperv/hn: Reorganize the synthetic parts detach.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8047
306392
hyperv/hn: Reorder the comment a little bit.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8048
The assumption that the channel is only opened upon synthetic device
attach time no longer holds, e.g. Hyper-V network device MTU changes.
We have to allow device drivers to preallocate bufrings, e.g. in
attach DEVMETHOD, to prevent bufring allocation failure once the
system memory is fragmented after running for a while.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7960
306073
hyperv/hn: Allocate bufrings in attach DEVMETHOD.
So that reinitialization, e.g. MTU change, will not fail when the system
memory is excessively fragmented.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7961
306074
hyperv/vmbus: Assert that the bufring address is page aligned.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7962
306076
hyperv/hn: Put debug messages under bootverbose
While I'm here, strip blank line.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7963
sephe [Fri, 14 Oct 2016 02:19:47 +0000 (02:19 +0000)]
MFC 305962,305964-305967
305962
hyperv/hn: Don't allow NVS and NDIS version change upon reinitailization
NVS and NDIS version change would break too much assumption and static
configuration.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7919
305964
hyperv/hn: Save capabilities for later use.
And don't allow capability changes during reinitialization, which
breaks too much static configuration.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7922
305965
hyperv/hn: Don't allow MTU change, if it is not supported by the NVS.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7923
305966
hyperv/hn: Stringent RSS sysctl checks
- Don't change RNDIS RSS configuration for RSS key sysctl, if the
interface is not capable of RSS yet.
- Don't change RSS indirect table (both cached one and RNDIS RSS
configuration), if the interface is not capable of RSS yet.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7924
305967
hyperv/hn: Allow RSS capability flipping upon attach/reinit.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7927
sephe [Fri, 14 Oct 2016 02:03:53 +0000 (02:03 +0000)]
MFC 305722
x86: Use sx lock for interrupt sources.
- Certain pic_assign_cpu, e.g. msi_assign_cpu can have quite a long
call chain. For msi_assign_cpu, mutex makes complex PCI bridge
drivers more tricky, e.g. sleep can note be called, etc, it will
be pretty tricky for upcoming Hyper-V PCI bridge driver for PCI
pass-through.
- It is not used on any hot code path nor non-sleepable context, so
sx should have the same effect as mutex.
PIC list is still protected by mutex to keep suspend/resume work.
The GUID string provided by hypervisor has leading and trailing braces,
while our GUID string does not have braces at all. Both braces should
be ignored, when the GUID strings are compared.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Modified by: sephe
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7809
sephe [Thu, 13 Oct 2016 06:49:00 +0000 (06:49 +0000)]
MFC 305111
hyperv/timesync: Rework time adjustment policy
- By default, adjust time upon SYNC request. It can be disabled
through hw.hvtimesync.ignore_sync_req. SYNC request will be
sent by hypervisor the host is resumed, rebooted, etc.
- By default, adjust time upon SAMPLE request, if there is 100ms
difference between VM time and hypervisor time. This can be
disabled through hw.hvtimesync.sample_drift.
And nuke the unnecessary task, since channel callback is running
in a Hyper-V taskqueue nowadays.
Submitted by: YanZhe Chen <t-yachen microsoft com>
Discussed with: Dexuan Cui <decui microsoft com>, Hongjiang Zhang <honzhan microsoft com>, sephe
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7707
sephe [Thu, 13 Oct 2016 06:09:26 +0000 (06:09 +0000)]
MFC 304790,304791
304790
hyperv/vmbus: Add function to calculate max # of elements in a bufring.
Sponsored by: Microsoft
304791
hyperv/storvsc: Increase queue depth and rework channel selection.
- Increasing queue depth gives ~100% performance improvement for
randwrite fio test in Azure.
- New channel selection, which takes LUN id and the current cpuid
into consideration, gives additional ~20% performance improvement
for ranwrite fio test in Azure.
Submitted by: Hongzhang Jiang <honzhan microsoft com>
Modified by: sephe
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7622
sephe [Thu, 13 Oct 2016 04:24:34 +0000 (04:24 +0000)]
MFC 304724,304728
304724
hyperv/hn: Remove the redundant rid setting for RNDIS HALT.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7595
304728
hyperv/hn: Log a warning for RESET_CMPLT.
RESET is not used by the hn(4) at all, and RESET_CMPLT does not even
have a rid to match with the pending requests. So, let's put it
onto an independent switch branch and log a warning about it.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7602
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7553
304444
hyperv/hn: Remove assign-only struct field
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7554
304446
hyperv/hn: Remove the useless num_channel
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7555
304447
hyperv/hn: Move RXBUF to hn_softc
And don't recreate RXBUF for each primary channel open, it is now
created in device_attach DEVMETHOD and destroyed in device_detach
DEVMETHOD.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7556
304591
hyperv/hn: Move chimney sending buffer to hn_softc
And don't recreate chimney sending buffer for each primary channel
open, it is now created in device_attach DEVMETHOD and destroyed
in device_detach DEVMETHOD.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7574
304593
hyperv/hn: Get rid of netvsc_dev
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7575
304594
hyperv/hn: Factor out function to execute NVS transactions.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7577
304595
hyperv/hn: Factor out function to simplify NVS request sending
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7578
mm [Wed, 12 Oct 2016 10:28:54 +0000 (10:28 +0000)]
MFC r306670:
Sync libarchive with vendor including security fixes.
Important vendor bugfixes (relevant to FreeBSD):
#747: Out of bounds read in mtree parser
#761: heap-based buffer overflow in read_Header (7-zip)
#794: Invalid file on bsdtar command line results in internal errors (1)
https://www.illumos.org/issues/7136
6922 added ESC_ZFS_VDEV_REMOVE_AUX and ESC_ZFS_VDEV_REMOVE_DEV sysevents
whenever an aux device gets removed from a pool. However, those sysevents will
be created without the vdev_guid and vdev_path fields. It would be better to
always populate those fields.
https://www.illumos.org/issues/7115
The addition of spa_event_notify in vdev removal code (see #6922) causes event
s
to be generated even if the spare failed to be removed with EBUSY.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Alan Somers <asomers@gmail.com>