/* * ***************************************************************************** * * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2018-2023 Gavin D. Howard and contributors. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * * Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * ***************************************************************************** * * Code to execute bc programs. * */ #include #include #include #include #include #include #include #include #include #include /** * Does a type check for something that expects a number. * @param r The result that will be checked. * @param n The result's number. */ static inline void bc_program_type_num(BcResult* r, BcNum* n) { #if BC_ENABLED // This should have already been taken care of. assert(r->t != BC_RESULT_VOID); #endif // BC_ENABLED if (BC_ERR(!BC_PROG_NUM(r, n))) bc_err(BC_ERR_EXEC_TYPE); } #if BC_ENABLED /** * Does a type check. * @param r The result to check. * @param t The type that the result should be. */ static void bc_program_type_match(BcResult* r, BcType t) { if (BC_ERR((r->t != BC_RESULT_ARRAY) != (!t))) bc_err(BC_ERR_EXEC_TYPE); } #endif // BC_ENABLED /** * Pulls an index out of a bytecode vector and updates the index into the vector * to point to the spot after the index. For more details on bytecode indices, * see the development manual (manuals/development.md#bytecode-indices). * @param code The bytecode vector. * @param bgn An in/out parameter; the index into the vector that will be * updated. * @return The index at @a bgn in the bytecode vector. */ static size_t bc_program_index(const char* restrict code, size_t* restrict bgn) { uchar amt = (uchar) code[(*bgn)++], i = 0; size_t res = 0; for (; i < amt; ++i, ++(*bgn)) { size_t temp = ((size_t) ((int) (uchar) code[*bgn]) & UCHAR_MAX); res |= (temp << (i * CHAR_BIT)); } return res; } /** * Returns a string from a result and its number. * @param p The program. * @param n The number tied to the result. * @return The string corresponding to the result and number. */ static inline char* bc_program_string(BcProgram* p, const BcNum* n) { return *((char**) bc_vec_item(&p->strs, n->scale)); } #if BC_ENABLED /** * Prepares the globals for a function call. This is only called when global * stacks are on because it pushes a copy of the current globals onto each of * their respective stacks. * @param p The program. */ static void bc_program_prepGlobals(BcProgram* p) { size_t i; for (i = 0; i < BC_PROG_GLOBALS_LEN; ++i) { bc_vec_push(p->globals_v + i, p->globals + i); } #if BC_ENABLE_EXTRA_MATH bc_rand_push(&p->rng); #endif // BC_ENABLE_EXTRA_MATH } /** * Pops globals stacks on returning from a function, or in the case of reset, * pops all but one item on each global stack. * @param p The program. * @param reset True if all but one item on each stack should be popped, false * otherwise. */ static void bc_program_popGlobals(BcProgram* p, bool reset) { size_t i; BC_SIG_ASSERT_LOCKED; for (i = 0; i < BC_PROG_GLOBALS_LEN; ++i) { BcVec* v = p->globals_v + i; bc_vec_npop(v, reset ? v->len - 1 : 1); p->globals[i] = BC_PROG_GLOBAL(v); } #if BC_ENABLE_EXTRA_MATH bc_rand_pop(&p->rng, reset); #endif // BC_ENABLE_EXTRA_MATH } /** * Derefeneces an array reference and returns a pointer to the real array. * @param p The program. * @param vec The reference vector. * @return A pointer to the desired array. */ static BcVec* bc_program_dereference(const BcProgram* p, BcVec* vec) { BcVec* v; size_t vidx, nidx, i = 0; // We want to be sure we have a reference vector. assert(vec->size == sizeof(uchar)); // Get the index of the vector in arrs, then the index of the original // referenced vector. vidx = bc_program_index(vec->v, &i); nidx = bc_program_index(vec->v, &i); v = bc_vec_item(bc_vec_item(&p->arrs, vidx), nidx); // We want to be sure we do *not* have a reference vector. assert(v->size != sizeof(uchar)); return v; } #endif // BC_ENABLED /** * Creates a BcNum from a BcBigDig and pushes onto the results stack. This is a * convenience function. * @param p The program. * @param dig The BcBigDig to push onto the results stack. * @param type The type that the pushed result should be. */ static void bc_program_pushBigdig(BcProgram* p, BcBigDig dig, BcResultType type) { BcResult res; res.t = type; BC_SIG_LOCK; bc_num_createFromBigdig(&res.d.n, dig); bc_vec_push(&p->results, &res); BC_SIG_UNLOCK; } size_t bc_program_addString(BcProgram* p, const char* str) { size_t idx; BC_SIG_ASSERT_LOCKED; if (bc_map_insert(&p->str_map, str, p->strs.len, &idx)) { char** str_ptr; BcId* id = bc_vec_item(&p->str_map, idx); // Get the index. idx = id->idx; // Push an empty string on the proper vector. str_ptr = bc_vec_pushEmpty(&p->strs); // We reuse the string in the ID (allocated by bc_map_insert()), because // why not? *str_ptr = id->name; } else { BcId* id = bc_vec_item(&p->str_map, idx); idx = id->idx; } return idx; } size_t bc_program_search(BcProgram* p, const char* name, bool var) { BcVec* v; BcVec* map; size_t i; BC_SIG_ASSERT_LOCKED; // Grab the right vector and map. v = var ? &p->vars : &p->arrs; map = var ? &p->var_map : &p->arr_map; // We do an insert because the variable might not exist yet. This is because // the parser calls this function. If the insert succeeds, we create a stack // for the variable/array. But regardless, bc_map_insert() gives us the // index of the item in i. if (bc_map_insert(map, name, v->len, &i)) { BcVec* temp = bc_vec_pushEmpty(v); bc_array_init(temp, var); } return ((BcId*) bc_vec_item(map, i))->idx; } /** * Returns the correct variable or array stack for the type. * @param p The program. * @param idx The index of the variable or array in the variable or array * vector. * @param type The type of vector to return. * @return A pointer to the variable or array stack. */ static inline BcVec* bc_program_vec(const BcProgram* p, size_t idx, BcType type) { const BcVec* v = (type == BC_TYPE_VAR) ? &p->vars : &p->arrs; return bc_vec_item(v, idx); } /** * Returns a pointer to the BcNum corresponding to the result. There is one * case, however, where this returns a pointer to a BcVec: if the type of the * result is array. In that case, the pointer is casted to a pointer to BcNum, * but is never used. The function that calls this expecting an array casts the * pointer back. This function is called a lot and needs to be as fast as * possible. * @param p The program. * @param r The result whose number will be returned. * @return The BcNum corresponding to the result. */ static BcNum* bc_program_num(BcProgram* p, BcResult* r) { BcNum* n; #ifdef _WIN32 // Windows made it an error to not initialize this, so shut it up. // I don't want to do this on other platforms because this procedure // is one of the most heavily-used, and eliminating the initialization // is a performance win. n = NULL; #endif // _WIN32 switch (r->t) { case BC_RESULT_STR: case BC_RESULT_TEMP: case BC_RESULT_IBASE: case BC_RESULT_SCALE: case BC_RESULT_OBASE: #if BC_ENABLE_EXTRA_MATH case BC_RESULT_SEED: #endif // BC_ENABLE_EXTRA_MATH { n = &r->d.n; break; } case BC_RESULT_VAR: case BC_RESULT_ARRAY: case BC_RESULT_ARRAY_ELEM: { BcVec* v; BcType type = (r->t == BC_RESULT_VAR) ? BC_TYPE_VAR : BC_TYPE_ARRAY; // Get the correct variable or array vector. v = bc_program_vec(p, r->d.loc.loc, type); // Surprisingly enough, the hard case is *not* returning an array; // it's returning an array element. This is because we have to dig // deeper to get *to* the element. That's what the code inside this // if statement does. if (r->t == BC_RESULT_ARRAY_ELEM) { size_t idx = r->d.loc.idx; v = bc_vec_item(v, r->d.loc.stack_idx); #if BC_ENABLED // If this is true, we have a reference vector, so dereference // it. The reason we don't need to worry about it for returning // a straight array is because we only care about references // when we access elements of an array that is a reference. That // is this code, so in essence, this line takes care of arrays // as well. if (v->size == sizeof(uchar)) v = bc_program_dereference(p, v); #endif // BC_ENABLED // We want to be sure we got a valid array of numbers. assert(v->size == sizeof(BcNum)); // The bc spec says that if an element is accessed that does not // exist, it should be preinitialized to 0. Well, if we access // an element *way* out there, we have to preinitialize all // elements between the current last element and the actual // accessed element. if (v->len <= idx) { BC_SIG_LOCK; bc_array_expand(v, bc_vm_growSize(idx, 1)); BC_SIG_UNLOCK; } n = bc_vec_item(v, idx); } // This is either a number (for a var) or an array (for an array). // Because bc_vec_top() and bc_vec_item() return a void*, we don't // need to cast. else { #if BC_ENABLED if (BC_IS_BC) { n = bc_vec_item(v, r->d.loc.stack_idx); } else #endif // BC_ENABLED { n = bc_vec_top(v); } } break; } case BC_RESULT_ZERO: { n = &vm->zero; break; } case BC_RESULT_ONE: { n = &vm->one; break; } #if BC_ENABLED // We should never get here; this is taken care of earlier because a // result is expected. case BC_RESULT_VOID: #if BC_DEBUG { abort(); // Fallthrough } #endif // BC_DEBUG case BC_RESULT_LAST: { n = &p->last; break; } #endif // BC_ENABLED #if BC_GCC // This is here in GCC to quiet the "maybe-uninitialized" warning. default: { abort(); } #endif // BC_GCC } return n; } /** * Prepares an operand for use. * @param p The program. * @param r An out parameter; this is set to the pointer to the result that * we care about. * @param n An out parameter; this is set to the pointer to the number that * we care about. * @param idx The index of the result from the top of the results stack. */ static void bc_program_operand(BcProgram* p, BcResult** r, BcNum** n, size_t idx) { *r = bc_vec_item_rev(&p->results, idx); #if BC_ENABLED if (BC_ERR((*r)->t == BC_RESULT_VOID)) bc_err(BC_ERR_EXEC_VOID_VAL); #endif // BC_ENABLED *n = bc_program_num(p, *r); } /** * Prepares the operands of a binary operator. * @param p The program. * @param l An out parameter; this is set to the pointer to the result for * the left operand. * @param ln An out parameter; this is set to the pointer to the number for * the left operand. * @param r An out parameter; this is set to the pointer to the result for * the right operand. * @param rn An out parameter; this is set to the pointer to the number for * the right operand. * @param idx The starting index where the operands are in the results stack, * starting from the top. */ static void bc_program_binPrep(BcProgram* p, BcResult** l, BcNum** ln, BcResult** r, BcNum** rn, size_t idx) { BcResultType lt; assert(p != NULL && l != NULL && ln != NULL && r != NULL && rn != NULL); #ifndef BC_PROG_NO_STACK_CHECK // Check the stack for dc. if (BC_IS_DC) { if (BC_ERR(!BC_PROG_STACK(&p->results, idx + 2))) { bc_err(BC_ERR_EXEC_STACK); } } #endif // BC_PROG_NO_STACK_CHECK assert(BC_PROG_STACK(&p->results, idx + 2)); // Get the operands. bc_program_operand(p, l, ln, idx + 1); bc_program_operand(p, r, rn, idx); lt = (*l)->t; #if BC_ENABLED // bc_program_operand() checked these for us. assert(lt != BC_RESULT_VOID && (*r)->t != BC_RESULT_VOID); #endif // BC_ENABLED // We run this again under these conditions in case any vector has been // reallocated out from under the BcNums or arrays we had. In other words, // this is to fix pointer invalidation. if (lt == (*r)->t && (lt == BC_RESULT_VAR || lt == BC_RESULT_ARRAY_ELEM)) { *ln = bc_program_num(p, *l); } if (BC_ERR(lt == BC_RESULT_STR)) bc_err(BC_ERR_EXEC_TYPE); } /** * Prepares the operands of a binary operator and type checks them. This is * separate from bc_program_binPrep() because some places want this, others want * bc_program_binPrep(). * @param p The program. * @param l An out parameter; this is set to the pointer to the result for * the left operand. * @param ln An out parameter; this is set to the pointer to the number for * the left operand. * @param r An out parameter; this is set to the pointer to the result for * the right operand. * @param rn An out parameter; this is set to the pointer to the number for * the right operand. * @param idx The starting index where the operands are in the results stack, * starting from the top. */ static void bc_program_binOpPrep(BcProgram* p, BcResult** l, BcNum** ln, BcResult** r, BcNum** rn, size_t idx) { bc_program_binPrep(p, l, ln, r, rn, idx); bc_program_type_num(*l, *ln); bc_program_type_num(*r, *rn); } /** * Prepares the operands of an assignment operator. * @param p The program. * @param l An out parameter; this is set to the pointer to the result for the * left operand. * @param ln An out parameter; this is set to the pointer to the number for the * left operand. * @param r An out parameter; this is set to the pointer to the result for the * right operand. * @param rn An out parameter; this is set to the pointer to the number for the * right operand. */ static void bc_program_assignPrep(BcProgram* p, BcResult** l, BcNum** ln, BcResult** r, BcNum** rn) { BcResultType lt, min; bool good; // This is the min non-allowable result type. dc allows strings. min = BC_RESULT_TEMP - ((unsigned int) (BC_IS_BC)); // Prepare the operands. bc_program_binPrep(p, l, ln, r, rn, 0); lt = (*l)->t; // Typecheck the left. if (BC_ERR(lt >= min && lt <= BC_RESULT_ONE)) bc_err(BC_ERR_EXEC_TYPE); // Strings can be assigned to variables. We are already good if we are // assigning a string. good = ((*r)->t == BC_RESULT_STR && lt <= BC_RESULT_ARRAY_ELEM); assert(BC_PROG_STR(*rn) || (*r)->t != BC_RESULT_STR); // If not, type check for a number. if (!good) bc_program_type_num(*r, *rn); } /** * Prepares a single operand and type checks it. This is separate from * bc_program_operand() because different places want one or the other. * @param p The program. * @param r An out parameter; this is set to the pointer to the result that * we care about. * @param n An out parameter; this is set to the pointer to the number that * we care about. * @param idx The index of the result from the top of the results stack. */ static void bc_program_prep(BcProgram* p, BcResult** r, BcNum** n, size_t idx) { assert(p != NULL && r != NULL && n != NULL); #ifndef BC_PROG_NO_STACK_CHECK // Check the stack for dc. if (BC_IS_DC) { if (BC_ERR(!BC_PROG_STACK(&p->results, idx + 1))) { bc_err(BC_ERR_EXEC_STACK); } } #endif // BC_PROG_NO_STACK_CHECK assert(BC_PROG_STACK(&p->results, idx + 1)); bc_program_operand(p, r, n, idx); // dc does not allow strings in this case. bc_program_type_num(*r, *n); } /** * Prepares and returns a clean result for the result of an operation. * @param p The program. * @return A clean result. */ static BcResult* bc_program_prepResult(BcProgram* p) { BcResult* res = bc_vec_pushEmpty(&p->results); bc_result_clear(res); return res; } /** * Prepares a constant for use. This parses the constant into a number and then * pushes that number onto the results stack. * @param p The program. * @param code The bytecode vector that we will pull the index of the constant * from. * @param bgn An in/out parameter; marks the start of the index in the * bytecode vector and will be updated to point to after the index. */ static void bc_program_const(BcProgram* p, const char* code, size_t* bgn) { // I lied. I actually push the result first. I can do this because the // result will be popped on error. I also get the constant itself. BcResult* r = bc_program_prepResult(p); BcConst* c = bc_vec_item(&p->consts, bc_program_index(code, bgn)); BcBigDig base = BC_PROG_IBASE(p); // Only reparse if the base changed. if (c->base != base) { // Allocate if we haven't yet. if (c->num.num == NULL) { // The plus 1 is in case of overflow with lack of clamping. size_t len = strlen(c->val) + (BC_DIGIT_CLAMP == 0); BC_SIG_LOCK; bc_num_init(&c->num, BC_NUM_RDX(len)); BC_SIG_UNLOCK; } // We need to zero an already existing number. else bc_num_zero(&c->num); // bc_num_parse() should only do operations that cannot fail. bc_num_parse(&c->num, c->val, base); c->base = base; } BC_SIG_LOCK; bc_num_createCopy(&r->d.n, &c->num); BC_SIG_UNLOCK; } /** * Executes a binary operator operation. * @param p The program. * @param inst The instruction corresponding to the binary operator to execute. */ static void bc_program_op(BcProgram* p, uchar inst) { BcResult* opd1; BcResult* opd2; BcResult* res; BcNum* n1; BcNum* n2; size_t idx = inst - BC_INST_POWER; res = bc_program_prepResult(p); bc_program_binOpPrep(p, &opd1, &n1, &opd2, &n2, 1); BC_SIG_LOCK; // Initialize the number with enough space, using the correct // BcNumBinaryOpReq function. This looks weird because it is executing an // item of an array. Rest assured that item is a function. bc_num_init(&res->d.n, bc_program_opReqs[idx](n1, n2, BC_PROG_SCALE(p))); BC_SIG_UNLOCK; assert(BC_NUM_RDX_VALID(n1)); assert(BC_NUM_RDX_VALID(n2)); // Run the operation. This also executes an item of an array. bc_program_ops[idx](n1, n2, &res->d.n, BC_PROG_SCALE(p)); bc_program_retire(p, 1, 2); } /** * Executes a read() or ? command. * @param p The program. */ static void bc_program_read(BcProgram* p) { BcStatus s; BcInstPtr ip; size_t i; const char* file; BcMode mode; BcFunc* f = bc_vec_item(&p->fns, BC_PROG_READ); // If we are already executing a read, that is an error. So look for a read // and barf. for (i = 0; i < p->stack.len; ++i) { BcInstPtr* ip_ptr = bc_vec_item(&p->stack, i); if (ip_ptr->func == BC_PROG_READ) bc_err(BC_ERR_EXEC_REC_READ); } BC_SIG_LOCK; // Save the filename because we are going to overwrite it. file = vm->file; mode = vm->mode; // It is a parse error if there needs to be more than one line, so we unset // this to tell the lexer to not request more. We set it back later. vm->mode = BC_MODE_FILE; if (!BC_PARSE_IS_INITED(&vm->read_prs, p)) { // We need to parse, but we don't want to use the existing parser // because it has state it needs to keep. (It could have a partial parse // state.) So we create a new parser. This parser is in the BcVm struct // so that it is not local, which means that a longjmp() could change // it. bc_parse_init(&vm->read_prs, p, BC_PROG_READ); // We need a separate input buffer; that's why it is also in the BcVm // struct. bc_vec_init(&vm->read_buf, sizeof(char), BC_DTOR_NONE); } else { // This needs to be updated because the parser could have been used // somewhere else. bc_parse_updateFunc(&vm->read_prs, BC_PROG_READ); // The read buffer also needs to be emptied or else it will still // contain previous read expressions. bc_vec_empty(&vm->read_buf); } BC_SETJMP_LOCKED(vm, exec_err); BC_SIG_UNLOCK; // Set up the lexer and the read function. bc_lex_file(&vm->read_prs.l, bc_program_stdin_name); bc_vec_popAll(&f->code); // Read a line. if (!BC_R) s = bc_read_line(&vm->read_buf, ""); else s = bc_read_line(&vm->read_buf, BC_VM_READ_PROMPT); // We should *not* have run into EOF. if (s == BC_STATUS_EOF) bc_err(BC_ERR_EXEC_READ_EXPR); // Parse *one* expression, so mode should not be stdin. bc_parse_text(&vm->read_prs, vm->read_buf.v, BC_MODE_FILE); BC_SIG_LOCK; vm->expr(&vm->read_prs, BC_PARSE_NOREAD | BC_PARSE_NEEDVAL); BC_SIG_UNLOCK; // We *must* have a valid expression. A semicolon cannot end an expression, // although EOF can. if (BC_ERR(vm->read_prs.l.t != BC_LEX_NLINE && vm->read_prs.l.t != BC_LEX_EOF)) { bc_err(BC_ERR_EXEC_READ_EXPR); } #if BC_ENABLED // Push on the globals stack if necessary. if (BC_G) bc_program_prepGlobals(p); #endif // BC_ENABLED // Set up a new BcInstPtr. ip.func = BC_PROG_READ; ip.idx = 0; ip.len = p->results.len; // Update this pointer, just in case. f = bc_vec_item(&p->fns, BC_PROG_READ); // We want a return instruction to simplify things. bc_vec_pushByte(&f->code, vm->read_ret); // This lock is here to make sure dc's tail calls are the same length. BC_SIG_LOCK; bc_vec_push(&p->stack, &ip); #if DC_ENABLED // We need a new tail call entry for dc. if (BC_IS_DC) { size_t temp = 0; bc_vec_push(&p->tail_calls, &temp); } #endif // DC_ENABLED exec_err: BC_SIG_MAYLOCK; vm->mode = (uchar) mode; vm->file = file; BC_LONGJMP_CONT(vm); } #if BC_ENABLE_EXTRA_MATH /** * Execute a rand(). * @param p The program. */ static void bc_program_rand(BcProgram* p) { BcRand rand = bc_rand_int(&p->rng); bc_program_pushBigdig(p, (BcBigDig) rand, BC_RESULT_TEMP); #if BC_DEBUG // This is just to ensure that the generated number is correct. I also use // braces because I declare every local at the top of the scope. { BcResult* r = bc_vec_top(&p->results); assert(BC_NUM_RDX_VALID_NP(r->d.n)); } #endif // BC_DEBUG } #endif // BC_ENABLE_EXTRA_MATH /** * Prints a series of characters, without escapes. * @param str The string (series of characters). */ static void bc_program_printChars(const char* str) { const char* nl; size_t len = vm->nchars + strlen(str); sig_atomic_t lock; BC_SIG_TRYLOCK(lock); bc_file_puts(&vm->fout, bc_flush_save, str); // We need to update the number of characters, so we find the last newline // and set the characters accordingly. nl = strrchr(str, '\n'); if (nl != NULL) len = strlen(nl + 1); vm->nchars = len > UINT16_MAX ? UINT16_MAX : (uint16_t) len; BC_SIG_TRYUNLOCK(lock); } /** * Prints a string with escapes. * @param str The string. */ static void bc_program_printString(const char* restrict str) { size_t i, len = strlen(str); #if DC_ENABLED // This is to ensure a nul byte is printed for dc's stream operation. if (!len && BC_IS_DC) { bc_vm_putchar('\0', bc_flush_save); return; } #endif // DC_ENABLED // Loop over the characters, processing escapes and printing the rest. for (i = 0; i < len; ++i) { int c = str[i]; // If we have an escape... if (c == '\\' && i != len - 1) { const char* ptr; // Get the escape character and its companion. c = str[++i]; ptr = strchr(bc_program_esc_chars, c); // If we have a companion character... if (ptr != NULL) { // We need to specially handle a newline. if (c == 'n') { BC_SIG_LOCK; vm->nchars = UINT16_MAX; BC_SIG_UNLOCK; } // Grab the actual character. c = bc_program_esc_seqs[(size_t) (ptr - bc_program_esc_chars)]; } else { // Just print the backslash if there is no companion character. // The following character will be printed later after the outer // if statement. bc_vm_putchar('\\', bc_flush_save); } } bc_vm_putchar(c, bc_flush_save); } } /** * Executes a print. This function handles all printing except streaming. * @param p The program. * @param inst The instruction for the type of print we are doing. * @param idx The index of the result that we are printing. */ static void bc_program_print(BcProgram* p, uchar inst, size_t idx) { BcResult* r; char* str; BcNum* n; bool pop = (inst != BC_INST_PRINT); assert(p != NULL); #ifndef BC_PROG_NO_STACK_CHECK if (BC_IS_DC) { if (BC_ERR(!BC_PROG_STACK(&p->results, idx + 1))) { bc_err(BC_ERR_EXEC_STACK); } } #endif // BC_PROG_NO_STACK_CHECK assert(BC_PROG_STACK(&p->results, idx + 1)); r = bc_vec_item_rev(&p->results, idx); #if BC_ENABLED // If we have a void value, that's not necessarily an error. It is if pop is // true because that means that we are executing a print statement, but // attempting to do a print on a lone void value is allowed because that's // exactly how we want void values used. if (r->t == BC_RESULT_VOID) { if (BC_ERR(pop)) bc_err(BC_ERR_EXEC_VOID_VAL); bc_vec_pop(&p->results); return; } #endif // BC_ENABLED n = bc_program_num(p, r); // If we have a number... if (BC_PROG_NUM(r, n)) { #if BC_ENABLED assert(inst != BC_INST_PRINT_STR); #endif // BC_ENABLED // Print the number. bc_num_print(n, BC_PROG_OBASE(p), !pop); #if BC_ENABLED // Need to store the number in last. if (BC_IS_BC) bc_num_copy(&p->last, n); #endif // BC_ENABLED } else { // We want to flush any stuff in the stdout buffer first. bc_file_flush(&vm->fout, bc_flush_save); str = bc_program_string(p, n); #if BC_ENABLED if (inst == BC_INST_PRINT_STR) bc_program_printChars(str); else #endif // BC_ENABLED { bc_program_printString(str); // Need to print a newline only in this case. if (inst == BC_INST_PRINT) bc_vm_putchar('\n', bc_flush_err); } } // bc always pops. This macro makes sure that happens. if (BC_PROGRAM_POP(pop)) bc_vec_pop(&p->results); } void bc_program_negate(BcResult* r, BcNum* n) { bc_num_copy(&r->d.n, n); if (BC_NUM_NONZERO(&r->d.n)) BC_NUM_NEG_TGL_NP(r->d.n); } void bc_program_not(BcResult* r, BcNum* n) { if (!bc_num_cmpZero(n)) bc_num_one(&r->d.n); } #if BC_ENABLE_EXTRA_MATH void bc_program_trunc(BcResult* r, BcNum* n) { bc_num_copy(&r->d.n, n); bc_num_truncate(&r->d.n, n->scale); } #endif // BC_ENABLE_EXTRA_MATH /** * Runs a unary operation. * @param p The program. * @param inst The unary operation. */ static void bc_program_unary(BcProgram* p, uchar inst) { BcResult* res; BcResult* ptr; BcNum* num; res = bc_program_prepResult(p); bc_program_prep(p, &ptr, &num, 1); BC_SIG_LOCK; bc_num_init(&res->d.n, num->len); BC_SIG_UNLOCK; // This calls a function that is in an array. bc_program_unarys[inst - BC_INST_NEG](res, num); bc_program_retire(p, 1, 1); } /** * Executes a logical operator. * @param p The program. * @param inst The operator. */ static void bc_program_logical(BcProgram* p, uchar inst) { BcResult* opd1; BcResult* opd2; BcResult* res; BcNum* n1; BcNum* n2; bool cond = 0; ssize_t cmp; res = bc_program_prepResult(p); // All logical operators (except boolean not, which is taken care of by // bc_program_unary()), are binary operators. bc_program_binOpPrep(p, &opd1, &n1, &opd2, &n2, 1); // Boolean and and or are not short circuiting. This is why; they can be // implemented much easier this way. if (inst == BC_INST_BOOL_AND) { cond = (bc_num_cmpZero(n1) && bc_num_cmpZero(n2)); } else if (inst == BC_INST_BOOL_OR) { cond = (bc_num_cmpZero(n1) || bc_num_cmpZero(n2)); } else { // We have a relational operator, so do a comparison. cmp = bc_num_cmp(n1, n2); switch (inst) { case BC_INST_REL_EQ: { cond = (cmp == 0); break; } case BC_INST_REL_LE: { cond = (cmp <= 0); break; } case BC_INST_REL_GE: { cond = (cmp >= 0); break; } case BC_INST_REL_NE: { cond = (cmp != 0); break; } case BC_INST_REL_LT: { cond = (cmp < 0); break; } case BC_INST_REL_GT: { cond = (cmp > 0); break; } #if BC_DEBUG default: { // There is a bug if we get here. abort(); } #endif // BC_DEBUG } } BC_SIG_LOCK; bc_num_init(&res->d.n, BC_NUM_DEF_SIZE); BC_SIG_UNLOCK; if (cond) bc_num_one(&res->d.n); bc_program_retire(p, 1, 2); } /** * Assigns a string to a variable. * @param p The program. * @param num The location of the string as a BcNum. * @param v The stack for the variable. * @param push Whether to push the string or not. To push means to move the * string from the results stack and push it onto the variable * stack. */ static void bc_program_assignStr(BcProgram* p, BcNum* num, BcVec* v, bool push) { BcNum* n; assert(BC_PROG_STACK(&p->results, 1 + !push)); assert(num != NULL && num->num == NULL && num->cap == 0); // If we are not pushing onto the variable stack, we need to replace the // top of the variable stack. if (!push) bc_vec_pop(v); bc_vec_npop(&p->results, 1 + !push); n = bc_vec_pushEmpty(v); // We can just copy because the num should not have allocated anything. // NOLINTNEXTLINE memcpy(n, num, sizeof(BcNum)); } /** * Copies a value to a variable. This is used for storing in dc as well as to * set function parameters to arguments in bc. * @param p The program. * @param idx The index of the variable or array to copy to. * @param t The type to copy to. This could be a variable or an array. */ static void bc_program_copyToVar(BcProgram* p, size_t idx, BcType t) { BcResult *ptr = NULL, r; BcVec* vec; BcNum* n = NULL; bool var = (t == BC_TYPE_VAR); #if DC_ENABLED // Check the stack for dc. if (BC_IS_DC) { if (BC_ERR(!BC_PROG_STACK(&p->results, 1))) bc_err(BC_ERR_EXEC_STACK); } #endif assert(BC_PROG_STACK(&p->results, 1)); bc_program_operand(p, &ptr, &n, 0); #if BC_ENABLED // Get the variable for a bc function call. if (BC_IS_BC) { // Type match the result. bc_program_type_match(ptr, t); } #endif // BC_ENABLED vec = bc_program_vec(p, idx, t); // We can shortcut in dc if it's assigning a string by using // bc_program_assignStr(). if (ptr->t == BC_RESULT_STR) { assert(BC_PROG_STR(n)); if (BC_ERR(!var)) bc_err(BC_ERR_EXEC_TYPE); bc_program_assignStr(p, n, vec, true); return; } BC_SIG_LOCK; // Just create and copy for a normal variable. if (var) { if (BC_PROG_STR(n)) { // NOLINTNEXTLINE memcpy(&r.d.n, n, sizeof(BcNum)); } else bc_num_createCopy(&r.d.n, n); } else { // If we get here, we are handling an array. This is one place we need // to cast the number from bc_program_num() to a vector. BcVec* v = (BcVec*) n; BcVec* rv = &r.d.v; #if BC_ENABLED if (BC_IS_BC) { bool ref, ref_size; // True if we are using a reference. ref = (v->size == sizeof(BcNum) && t == BC_TYPE_REF); // True if we already have a reference vector. This is slightly // (okay, a lot; it just doesn't look that way) different from // above. The above means that we need to construct a reference // vector, whereas this means that we have one and we might have to // *dereference* it. ref_size = (v->size == sizeof(uchar)); // If we *should* have a reference. if (ref || (ref_size && t == BC_TYPE_REF)) { // Create a new reference vector. bc_vec_init(rv, sizeof(uchar), BC_DTOR_NONE); // If this is true, then we need to construct a reference. if (ref) { // Make sure the pointer was not invalidated. vec = bc_program_vec(p, idx, t); // Push the indices onto the reference vector. This takes // care of last; it ensures the reference goes to the right // place. bc_vec_pushIndex(rv, ptr->d.loc.loc); bc_vec_pushIndex(rv, ptr->d.loc.stack_idx); } // If we get here, we are copying a ref to a ref. Just push a // copy of all of the bytes. else bc_vec_npush(rv, v->len * sizeof(uchar), v->v); // Push the reference vector onto the array stack and pop the // source. bc_vec_push(vec, &r.d); bc_vec_pop(&p->results); // We need to return early to avoid executing code that we must // not touch. BC_SIG_UNLOCK; return; } // If we get here, we have a reference, but we need an array, so // dereference the array. else if (ref_size && t != BC_TYPE_REF) { v = bc_program_dereference(p, v); } } #endif // BC_ENABLED // If we get here, we need to copy the array because in bc, all // arguments are passed by value. Yes, this is expensive. bc_array_init(rv, true); bc_array_copy(rv, v); } // Push the vector onto the array stack and pop the source. bc_vec_push(vec, &r.d); bc_vec_pop(&p->results); BC_SIG_UNLOCK; } void bc_program_assignBuiltin(BcProgram* p, bool scale, bool obase, BcBigDig val) { BcBigDig* ptr_t; BcBigDig max, min; #if BC_ENABLED BcVec* v; BcBigDig* ptr; #endif // BC_ENABLED assert(!scale || !obase); // Scale needs handling separate from ibase and obase. if (scale) { // Set the min and max. min = 0; max = vm->maxes[BC_PROG_GLOBALS_SCALE]; #if BC_ENABLED // Get a pointer to the stack. v = p->globals_v + BC_PROG_GLOBALS_SCALE; #endif // BC_ENABLED // Get a pointer to the current value. ptr_t = p->globals + BC_PROG_GLOBALS_SCALE; } else { // Set the min and max. min = BC_NUM_MIN_BASE; if (BC_ENABLE_EXTRA_MATH && obase && (BC_IS_DC || !BC_IS_POSIX)) { min = 0; } max = vm->maxes[obase + BC_PROG_GLOBALS_IBASE]; #if BC_ENABLED // Get a pointer to the stack. v = p->globals_v + BC_PROG_GLOBALS_IBASE + obase; #endif // BC_ENABLED // Get a pointer to the current value. ptr_t = p->globals + BC_PROG_GLOBALS_IBASE + obase; } // Check for error. if (BC_ERR(val > max || val < min)) { BcErr e; // This grabs the right error. if (scale) e = BC_ERR_EXEC_SCALE; else if (obase) e = BC_ERR_EXEC_OBASE; else e = BC_ERR_EXEC_IBASE; bc_verr(e, min, max); } #if BC_ENABLED // Set the top of the stack. ptr = bc_vec_top(v); *ptr = val; #endif // BC_ENABLED // Set the actual global variable. *ptr_t = val; } #if BC_ENABLE_EXTRA_MATH void bc_program_assignSeed(BcProgram* p, BcNum* val) { bc_num_rng(val, &p->rng); } #endif // BC_ENABLE_EXTRA_MATH /** * Executes an assignment operator. * @param p The program. * @param inst The assignment operator to execute. */ static void bc_program_assign(BcProgram* p, uchar inst) { // The local use_val is true when the assigned value needs to be copied. BcResult* left; BcResult* right; BcResult res; BcNum* l; BcNum* r; bool ob, sc, use_val = BC_INST_USE_VAL(inst); bc_program_assignPrep(p, &left, &l, &right, &r); // Assigning to a string should be impossible simply because of the parse. assert(left->t != BC_RESULT_STR); // If we are assigning a string... if (right->t == BC_RESULT_STR) { assert(BC_PROG_STR(r)); #if BC_ENABLED if (inst != BC_INST_ASSIGN && inst != BC_INST_ASSIGN_NO_VAL) { bc_err(BC_ERR_EXEC_TYPE); } #endif // BC_ENABLED // If we are assigning to an array element... if (left->t == BC_RESULT_ARRAY_ELEM) { BC_SIG_LOCK; // We need to free the number and clear it. bc_num_free(l); // NOLINTNEXTLINE memcpy(l, r, sizeof(BcNum)); // Now we can pop the results. bc_vec_npop(&p->results, 2); BC_SIG_UNLOCK; } else { // If we get here, we are assigning to a variable, which we can use // bc_program_assignStr() for. BcVec* v = bc_program_vec(p, left->d.loc.loc, BC_TYPE_VAR); bc_program_assignStr(p, r, v, false); } #if BC_ENABLED // If this is true, the value is going to be used again, so we want to // push a temporary with the string. if (inst == BC_INST_ASSIGN) { res.t = BC_RESULT_STR; // NOLINTNEXTLINE memcpy(&res.d.n, r, sizeof(BcNum)); bc_vec_push(&p->results, &res); } #endif // BC_ENABLED // By using bc_program_assignStr(), we short-circuited this, so return. return; } // If we have a normal assignment operator, not a math one... if (BC_INST_IS_ASSIGN(inst)) { // Assigning to a variable that has a string here is fine because there // is no math done on it. // BC_RESULT_TEMP, BC_RESULT_IBASE, BC_RESULT_OBASE, BC_RESULT_SCALE, // and BC_RESULT_SEED all have temporary copies. Because that's the // case, we can free the left and just move the value over. We set the // type of right to BC_RESULT_ZERO in order to prevent it from being // freed. We also don't have to worry about BC_RESULT_STR because it's // take care of above. if (right->t == BC_RESULT_TEMP || right->t >= BC_RESULT_IBASE) { BC_SIG_LOCK; bc_num_free(l); // NOLINTNEXTLINE memcpy(l, r, sizeof(BcNum)); right->t = BC_RESULT_ZERO; BC_SIG_UNLOCK; } // Copy over. else bc_num_copy(l, r); } #if BC_ENABLED else { // If we get here, we are doing a math assignment (+=, -=, etc.). So // we need to prepare for a binary operator. BcBigDig scale = BC_PROG_SCALE(p); // At this point, the left side could still be a string because it could // be a variable that has the string. If that's the case, we have a type // error. if (BC_PROG_STR(l)) bc_err(BC_ERR_EXEC_TYPE); // Get the right type of assignment operator, whether val is used or // NO_VAL for performance. if (!use_val) { inst -= (BC_INST_ASSIGN_POWER_NO_VAL - BC_INST_ASSIGN_POWER); } assert(BC_NUM_RDX_VALID(l)); assert(BC_NUM_RDX_VALID(r)); // Run the actual operation. We do not need worry about reallocating l // because bc_num_binary() does that behind the scenes for us. bc_program_ops[inst - BC_INST_ASSIGN_POWER](l, r, l, scale); } #endif // BC_ENABLED ob = (left->t == BC_RESULT_OBASE); sc = (left->t == BC_RESULT_SCALE); // The globals need special handling, especially the non-seed ones. The // first part of the if statement handles them. if (ob || sc || left->t == BC_RESULT_IBASE) { // Get the actual value. BcBigDig val = bc_num_bigdig(l); bc_program_assignBuiltin(p, sc, ob, val); } #if BC_ENABLE_EXTRA_MATH // To assign to steed, let bc_num_rng() do its magic. else if (left->t == BC_RESULT_SEED) bc_program_assignSeed(p, l); #endif // BC_ENABLE_EXTRA_MATH BC_SIG_LOCK; // If we needed to use the value, then we need to copy it. Otherwise, we can // pop indiscriminately. Oh, and the copy should be a BC_RESULT_TEMP. if (use_val) { bc_num_createCopy(&res.d.n, l); res.t = BC_RESULT_TEMP; bc_vec_npop(&p->results, 2); bc_vec_push(&p->results, &res); } else bc_vec_npop(&p->results, 2); BC_SIG_UNLOCK; } /** * Pushes a variable's value onto the results stack. * @param p The program. * @param code The bytecode vector to pull the variable's index out of. * @param bgn An in/out parameter; the start of the index in the bytecode * vector, and will be updated to point after the index on return. * @param pop True if the variable's value should be popped off its stack. * This is only used in dc. * @param copy True if the variable's value should be copied to the results * stack. This is only used in dc. */ static void bc_program_pushVar(BcProgram* p, const char* restrict code, size_t* restrict bgn, bool pop, bool copy) { BcResult r; size_t idx = bc_program_index(code, bgn); BcVec* v; // Set the result appropriately. r.t = BC_RESULT_VAR; r.d.loc.loc = idx; // Get the stack for the variable. This is used in both bc and dc. v = bc_program_vec(p, idx, BC_TYPE_VAR); r.d.loc.stack_idx = v->len - 1; #if DC_ENABLED // If this condition is true, then we have the hard case, where we have to // adjust dc registers. if (BC_IS_DC && (pop || copy)) { // Get the number at the top at the top of the stack. BcNum* num = bc_vec_top(v); // Ensure there are enough elements on the stack. if (BC_ERR(!BC_PROG_STACK(v, 2 - copy))) { const char* name = bc_map_name(&p->var_map, idx); bc_verr(BC_ERR_EXEC_STACK_REGISTER, name); } assert(BC_PROG_STACK(v, 2 - copy)); // If the top of the stack is actually a number... if (!BC_PROG_STR(num)) { BC_SIG_LOCK; // Create a copy to go onto the results stack as appropriate. r.t = BC_RESULT_TEMP; bc_num_createCopy(&r.d.n, num); // If we are not actually copying, we need to do a replace, so pop. if (!copy) bc_vec_pop(v); bc_vec_push(&p->results, &r); BC_SIG_UNLOCK; return; } else { // Set the string result. We can just memcpy because all of the // fields in the num should be cleared. // NOLINTNEXTLINE memcpy(&r.d.n, num, sizeof(BcNum)); r.t = BC_RESULT_STR; } // If we are not actually copying, we need to do a replace, so pop. if (!copy) bc_vec_pop(v); } #endif // DC_ENABLED bc_vec_push(&p->results, &r); } /** * Pushes an array or an array element onto the results stack. * @param p The program. * @param code The bytecode vector to pull the variable's index out of. * @param bgn An in/out parameter; the start of the index in the bytecode * vector, and will be updated to point after the index on return. * @param inst The instruction; whether to push an array or an array element. */ static void bc_program_pushArray(BcProgram* p, const char* restrict code, size_t* restrict bgn, uchar inst) { BcResult r; BcResult* operand; BcNum* num; BcBigDig temp; BcVec* v; // Get the index of the array. r.d.loc.loc = bc_program_index(code, bgn); // We need the array to get its length. v = bc_program_vec(p, r.d.loc.loc, BC_TYPE_ARRAY); assert(v != NULL); r.d.loc.stack_idx = v->len - 1; // Doing an array is easy; just set the result type and finish. if (inst == BC_INST_ARRAY) { r.t = BC_RESULT_ARRAY; bc_vec_push(&p->results, &r); return; } // Grab the top element of the results stack for the array index. bc_program_prep(p, &operand, &num, 0); temp = bc_num_bigdig(num); // Set the result. r.t = BC_RESULT_ARRAY_ELEM; r.d.loc.idx = (size_t) temp; BC_SIG_LOCK; // Pop the index and push the element. bc_vec_pop(&p->results); bc_vec_push(&p->results, &r); BC_SIG_UNLOCK; } #if BC_ENABLED /** * Executes an increment or decrement operator. This only handles postfix * inc/dec because the parser translates prefix inc/dec into an assignment where * the value is used. * @param p The program. * @param inst The instruction; whether to do an increment or decrement. */ static void bc_program_incdec(BcProgram* p, uchar inst) { BcResult *ptr, res, copy; BcNum* num; uchar inst2; bc_program_prep(p, &ptr, &num, 0); BC_SIG_LOCK; // We need a copy from *before* the operation. copy.t = BC_RESULT_TEMP; bc_num_createCopy(©.d.n, num); BC_SETJMP_LOCKED(vm, exit); BC_SIG_UNLOCK; // Create the proper assignment. res.t = BC_RESULT_ONE; inst2 = BC_INST_ASSIGN_PLUS_NO_VAL + (inst & 0x01); bc_vec_push(&p->results, &res); bc_program_assign(p, inst2); BC_SIG_LOCK; bc_vec_push(&p->results, ©); BC_UNSETJMP(vm); BC_SIG_UNLOCK; // No need to free the copy here because we pushed it onto the stack. return; exit: BC_SIG_MAYLOCK; bc_num_free(©.d.n); BC_LONGJMP_CONT(vm); } /** * Executes a function call for bc. * @param p The program. * @param code The bytecode vector to pull the number of arguments and the * function index out of. * @param bgn An in/out parameter; the start of the indices in the bytecode * vector, and will be updated to point after the indices on * return. */ static void bc_program_call(BcProgram* p, const char* restrict code, size_t* restrict bgn) { BcInstPtr ip; size_t i, nargs; BcFunc* f; BcVec* v; BcAuto* a; BcResult* arg; // Pull the number of arguments out of the bytecode vector. nargs = bc_program_index(code, bgn); // Set up instruction pointer. ip.idx = 0; ip.func = bc_program_index(code, bgn); f = bc_vec_item(&p->fns, ip.func); // Error checking. if (BC_ERR(!f->code.len)) bc_verr(BC_ERR_EXEC_UNDEF_FUNC, f->name); if (BC_ERR(nargs != f->nparams)) { bc_verr(BC_ERR_EXEC_PARAMS, f->nparams, nargs); } // Set the length of the results stack. We discount the argument, of course. ip.len = p->results.len - nargs; assert(BC_PROG_STACK(&p->results, nargs)); // Prepare the globals' stacks. if (BC_G) bc_program_prepGlobals(p); // Push the arguments onto the stacks of their respective parameters. for (i = 0; i < nargs; ++i) { arg = bc_vec_top(&p->results); if (BC_ERR(arg->t == BC_RESULT_VOID)) bc_err(BC_ERR_EXEC_VOID_VAL); // Get the corresponding parameter. a = bc_vec_item(&f->autos, nargs - 1 - i); // Actually push the value onto the parameter's stack. bc_program_copyToVar(p, a->idx, a->type); } BC_SIG_LOCK; // Push zeroes onto the stacks of the auto variables. for (; i < f->autos.len; ++i) { // Get the auto and its stack. a = bc_vec_item(&f->autos, i); v = bc_program_vec(p, a->idx, a->type); // If a variable, just push a 0; otherwise, push an array. if (a->type == BC_TYPE_VAR) { BcNum* n = bc_vec_pushEmpty(v); bc_num_init(n, BC_NUM_DEF_SIZE); } else { BcVec* v2; assert(a->type == BC_TYPE_ARRAY); v2 = bc_vec_pushEmpty(v); bc_array_init(v2, true); } } // Push the instruction pointer onto the execution stack. bc_vec_push(&p->stack, &ip); BC_SIG_UNLOCK; } /** * Executes a return instruction. * @param p The program. * @param inst The return instruction. bc can return void, and we need to know * if it is. */ static void bc_program_return(BcProgram* p, uchar inst) { BcResult* res; BcFunc* f; BcInstPtr* ip; size_t i, nresults; // Get the instruction pointer. ip = bc_vec_top(&p->stack); // Get the difference between the actual number of results and the number of // results the caller expects. nresults = p->results.len - ip->len; // If this isn't true, there was a missing call somewhere. assert(BC_PROG_STACK(&p->stack, 2)); // If this isn't true, the parser screwed by giving us no value when we // expected one, or giving us a value when we expected none. assert(BC_PROG_STACK(&p->results, ip->len + (inst == BC_INST_RET))); // Get the function we are returning from. f = bc_vec_item(&p->fns, ip->func); res = bc_program_prepResult(p); // If we are returning normally... if (inst == BC_INST_RET) { BcNum* num; BcResult* operand; // Prepare and copy the return value. bc_program_operand(p, &operand, &num, 1); if (BC_PROG_STR(num)) { // We need to set this because otherwise, it will be a // BC_RESULT_TEMP, and BC_RESULT_TEMP needs an actual number to make // it easier to do type checking. res->t = BC_RESULT_STR; // NOLINTNEXTLINE memcpy(&res->d.n, num, sizeof(BcNum)); } else { BC_SIG_LOCK; bc_num_createCopy(&res->d.n, num); } } // Void is easy; set the result. else if (inst == BC_INST_RET_VOID) res->t = BC_RESULT_VOID; else { BC_SIG_LOCK; // If we get here, the instruction is for returning a zero, so do that. bc_num_init(&res->d.n, BC_NUM_DEF_SIZE); } BC_SIG_MAYUNLOCK; // We need to pop items off of the stacks of arguments and autos as well. for (i = 0; i < f->autos.len; ++i) { BcAuto* a = bc_vec_item(&f->autos, i); BcVec* v = bc_program_vec(p, a->idx, a->type); bc_vec_pop(v); } BC_SIG_LOCK; // When we retire, pop all of the unused results. bc_program_retire(p, 1, nresults); // Pop the globals, if necessary. if (BC_G) bc_program_popGlobals(p, false); // Pop the stack. This is what causes the function to actually "return." bc_vec_pop(&p->stack); BC_SIG_UNLOCK; } #endif // BC_ENABLED /** * Executes a builtin function. * @param p The program. * @param inst The builtin to execute. */ static void bc_program_builtin(BcProgram* p, uchar inst) { BcResult* opd; BcResult* res; BcNum* num; bool len = (inst == BC_INST_LENGTH); // Ensure we have a valid builtin. #if BC_ENABLE_EXTRA_MATH assert(inst >= BC_INST_LENGTH && inst <= BC_INST_IRAND); #else // BC_ENABLE_EXTRA_MATH assert(inst >= BC_INST_LENGTH && inst <= BC_INST_IS_STRING); #endif // BC_ENABLE_EXTRA_MATH #ifndef BC_PROG_NO_STACK_CHECK // Check stack for dc. if (BC_IS_DC && BC_ERR(!BC_PROG_STACK(&p->results, 1))) { bc_err(BC_ERR_EXEC_STACK); } #endif // BC_PROG_NO_STACK_CHECK assert(BC_PROG_STACK(&p->results, 1)); res = bc_program_prepResult(p); bc_program_operand(p, &opd, &num, 1); assert(num != NULL); // We need to ensure that strings and arrays aren't passed to most builtins. // The scale function can take strings in dc. if (!len && (inst != BC_INST_SCALE_FUNC || BC_IS_BC) && inst != BC_INST_IS_NUMBER && inst != BC_INST_IS_STRING) { bc_program_type_num(opd, num); } // Square root is easy. if (inst == BC_INST_SQRT) bc_num_sqrt(num, &res->d.n, BC_PROG_SCALE(p)); // Absolute value is easy. else if (inst == BC_INST_ABS) { BC_SIG_LOCK; bc_num_createCopy(&res->d.n, num); BC_SIG_UNLOCK; BC_NUM_NEG_CLR_NP(res->d.n); } // Testing for number or string is easy. else if (inst == BC_INST_IS_NUMBER || inst == BC_INST_IS_STRING) { bool cond; bool is_str; BC_SIG_LOCK; bc_num_init(&res->d.n, BC_NUM_DEF_SIZE); BC_SIG_UNLOCK; // Test if the number is a string. is_str = BC_PROG_STR(num); // This confusing condition simply means that the instruction must be // true if is_str is, or it must be false if is_str is. Otherwise, the // returned value is false (0). cond = ((inst == BC_INST_IS_STRING) == is_str); if (cond) bc_num_one(&res->d.n); } #if BC_ENABLE_EXTRA_MATH // irand() is easy. else if (inst == BC_INST_IRAND) { BC_SIG_LOCK; bc_num_init(&res->d.n, num->len - BC_NUM_RDX_VAL(num)); BC_SIG_UNLOCK; bc_num_irand(num, &res->d.n, &p->rng); } #endif // BC_ENABLE_EXTRA_MATH // Everything else is...not easy. else { BcBigDig val = 0; // Well, scale() is easy, but length() is not. if (len) { // If we are bc and we have an array... if (opd->t == BC_RESULT_ARRAY) { // Yes, this is one place where we need to cast the number from // bc_program_num() to a vector. BcVec* v = (BcVec*) num; // XXX: If this is changed, you should also change the similar // code in bc_program_asciify(). #if BC_ENABLED // Dereference the array, if necessary. if (BC_IS_BC && v->size == sizeof(uchar)) { v = bc_program_dereference(p, v); } #endif // BC_ENABLED assert(v->size == sizeof(BcNum)); val = (BcBigDig) v->len; } else { // If the item is a string... if (!BC_PROG_NUM(opd, num)) { char* str; // Get the string, then get the length. str = bc_program_string(p, num); val = (BcBigDig) strlen(str); } else { // Calculate the length of the number. val = (BcBigDig) bc_num_len(num); } } } // Like I said; scale() is actually easy. It just also needs the integer // conversion that length() does. else if (BC_IS_BC || BC_PROG_NUM(opd, num)) { val = (BcBigDig) bc_num_scale(num); } BC_SIG_LOCK; // Create the result. bc_num_createFromBigdig(&res->d.n, val); BC_SIG_UNLOCK; } bc_program_retire(p, 1, 1); } /** * Executes a divmod. * @param p The program. */ static void bc_program_divmod(BcProgram* p) { BcResult* opd1; BcResult* opd2; BcResult* res; BcResult* res2; BcNum* n1; BcNum* n2; size_t req; // We grow first to avoid pointer invalidation. bc_vec_grow(&p->results, 2); // We don't need to update the pointer because // the capacity is enough due to the line above. res2 = bc_program_prepResult(p); res = bc_program_prepResult(p); // Prepare the operands. bc_program_binOpPrep(p, &opd1, &n1, &opd2, &n2, 2); req = bc_num_mulReq(n1, n2, BC_PROG_SCALE(p)); BC_SIG_LOCK; // Initialize the results. bc_num_init(&res->d.n, req); bc_num_init(&res2->d.n, req); BC_SIG_UNLOCK; // Execute. bc_num_divmod(n1, n2, &res2->d.n, &res->d.n, BC_PROG_SCALE(p)); bc_program_retire(p, 2, 2); } /** * Executes modular exponentiation. * @param p The program. */ static void bc_program_modexp(BcProgram* p) { BcResult* r1; BcResult* r2; BcResult* r3; BcResult* res; BcNum* n1; BcNum* n2; BcNum* n3; #if DC_ENABLED // Check the stack. if (BC_IS_DC && BC_ERR(!BC_PROG_STACK(&p->results, 3))) { bc_err(BC_ERR_EXEC_STACK); } #endif // DC_ENABLED assert(BC_PROG_STACK(&p->results, 3)); res = bc_program_prepResult(p); // Get the first operand and typecheck. bc_program_operand(p, &r1, &n1, 3); bc_program_type_num(r1, n1); // Get the last two operands. bc_program_binOpPrep(p, &r2, &n2, &r3, &n3, 1); // Make sure that the values have their pointers updated, if necessary. // Only array elements are possible because this is dc. if (r1->t == BC_RESULT_ARRAY_ELEM && (r1->t == r2->t || r1->t == r3->t)) { n1 = bc_program_num(p, r1); } BC_SIG_LOCK; bc_num_init(&res->d.n, n3->len); BC_SIG_UNLOCK; bc_num_modexp(n1, n2, n3, &res->d.n); bc_program_retire(p, 1, 3); } /** * Asciifies a number for dc. This is a helper for bc_program_asciify(). * @param p The program. * @param n The number to asciify. */ static uchar bc_program_asciifyNum(BcProgram* p, BcNum* n) { bc_num_copy(&p->asciify, n); // We want to clear the scale and sign for easy mod later. bc_num_truncate(&p->asciify, p->asciify.scale); BC_NUM_NEG_CLR(&p->asciify); // This is guaranteed to not have a divide by 0 // because strmb is equal to 256. bc_num_mod(&p->asciify, &p->strmb, &p->asciify, 0); // This is also guaranteed to not error because num is in the range // [0, UCHAR_MAX], which is definitely in range for a BcBigDig. And // it is not negative. return (uchar) bc_num_bigdig2(&p->asciify); } /** * Executes the "asciify" command in bc and dc. * @param p The program. */ static void bc_program_asciify(BcProgram* p) { BcResult *r, res; BcNum* n; uchar c; size_t idx; #if BC_ENABLED // This is in the outer scope because it has to be freed after a jump. char* temp_str; #endif // BC_ENABLED // Check the stack. if (BC_ERR(!BC_PROG_STACK(&p->results, 1))) bc_err(BC_ERR_EXEC_STACK); assert(BC_PROG_STACK(&p->results, 1)); // Get the top of the results stack. bc_program_operand(p, &r, &n, 0); assert(n != NULL); assert(BC_IS_BC || r->t != BC_RESULT_ARRAY); #if BC_ENABLED // Handle arrays in bc specially. if (r->t == BC_RESULT_ARRAY) { // Yes, this is one place where we need to cast the number from // bc_program_num() to a vector. BcVec* v = (BcVec*) n; size_t i; // XXX: If this is changed, you should also change the similar code in // bc_program_builtin(). // Dereference the array, if necessary. if (v->size == sizeof(uchar)) { v = bc_program_dereference(p, v); } assert(v->size == sizeof(BcNum)); // Allocate the string and set the jump for it. BC_SIG_LOCK; temp_str = bc_vm_malloc(v->len + 1); BC_SETJMP_LOCKED(vm, exit); BC_SIG_UNLOCK; // Convert the array. for (i = 0; i < v->len; ++i) { BcNum* num = (BcNum*) bc_vec_item(v, i); if (BC_PROG_STR(num)) { temp_str[i] = (bc_program_string(p, num))[0]; } else { temp_str[i] = (char) bc_program_asciifyNum(p, num); } } temp_str[v->len] = '\0'; // Store the string in the slab and map, and free the temp string. BC_SIG_LOCK; idx = bc_program_addString(p, temp_str); free(temp_str); BC_UNSETJMP(vm); BC_SIG_UNLOCK; } else #endif // BC_ENABLED { char str[2]; char* str2; // Asciify. if (BC_PROG_NUM(r, n)) c = bc_program_asciifyNum(p, n); else { // Get the string itself, then the first character. str2 = bc_program_string(p, n); c = (uchar) str2[0]; } // Fill the resulting string. str[0] = (char) c; str[1] = '\0'; // Add the string to the data structures. BC_SIG_LOCK; idx = bc_program_addString(p, str); BC_SIG_UNLOCK; } // Set the result res.t = BC_RESULT_STR; bc_num_clear(&res.d.n); res.d.n.scale = idx; // Pop and push. bc_vec_pop(&p->results); bc_vec_push(&p->results, &res); return; #if BC_ENABLED exit: free(temp_str); #endif // BC_ENABLED } /** * Streams a number or a string to stdout. * @param p The program. */ static void bc_program_printStream(BcProgram* p) { BcResult* r; BcNum* n; // Check the stack. if (BC_ERR(!BC_PROG_STACK(&p->results, 1))) bc_err(BC_ERR_EXEC_STACK); assert(BC_PROG_STACK(&p->results, 1)); // Get the top of the results stack. bc_program_operand(p, &r, &n, 0); assert(n != NULL); // Stream appropriately. if (BC_PROG_NUM(r, n)) bc_num_stream(n); else bc_program_printChars(bc_program_string(p, n)); // Pop the operand. bc_vec_pop(&p->results); } #if DC_ENABLED /** * Gets the length of a register in dc and pushes it onto the results stack. * @param p The program. * @param code The bytecode vector to pull the register's index out of. * @param bgn An in/out parameter; the start of the index in the bytecode * vector, and will be updated to point after the index on return. */ static void bc_program_regStackLen(BcProgram* p, const char* restrict code, size_t* restrict bgn) { size_t idx = bc_program_index(code, bgn); BcVec* v = bc_program_vec(p, idx, BC_TYPE_VAR); bc_program_pushBigdig(p, (BcBigDig) v->len, BC_RESULT_TEMP); } /** * Pushes the length of the results stack onto the results stack. * @param p The program. */ static void bc_program_stackLen(BcProgram* p) { bc_program_pushBigdig(p, (BcBigDig) p->results.len, BC_RESULT_TEMP); } /** * Pops a certain number of elements off the execution stack. * @param p The program. * @param inst The instruction to tell us how many. There is one to pop up to * 2, and one to pop the amount equal to the number at the top of * the results stack. */ static void bc_program_nquit(BcProgram* p, uchar inst) { BcResult* opnd; BcNum* num; BcBigDig val; size_t i; // Ensure that the tail calls stack is correct. assert(p->stack.len == p->tail_calls.len); // Get the number of executions to pop. if (inst == BC_INST_QUIT) val = 2; else { bc_program_prep(p, &opnd, &num, 0); val = bc_num_bigdig(num); bc_vec_pop(&p->results); } // Loop over the tail call stack and adjust the quit value appropriately. for (i = 0; val && i < p->tail_calls.len; ++i) { // Get the number of tail calls for this one. size_t calls = *((size_t*) bc_vec_item_rev(&p->tail_calls, i)) + 1; // Adjust the value. if (calls >= val) val = 0; else val -= (BcBigDig) calls; } // If we don't have enough executions, just quit. if (i == p->stack.len) { vm->status = BC_STATUS_QUIT; BC_JMP; } else { // We can always pop the last item we reached on the tail call stack // because these are for tail calls. That means that any executions that // we would not have quit in that position on the stack would have quit // anyway. BC_SIG_LOCK; bc_vec_npop(&p->stack, i); bc_vec_npop(&p->tail_calls, i); BC_SIG_UNLOCK; } } /** * Pushes the depth of the execution stack onto the stack. * @param p The program. */ static void bc_program_execStackLen(BcProgram* p) { size_t i, amt, len = p->tail_calls.len; amt = len; for (i = 0; i < len; ++i) { amt += *((size_t*) bc_vec_item(&p->tail_calls, i)); } bc_program_pushBigdig(p, (BcBigDig) amt, BC_RESULT_TEMP); } /** * * @param p The program. * @param code The bytecode vector to pull the register's index out of. * @param bgn An in/out parameter; the start of the index in the bytecode * vector, and will be updated to point after the index on return. * @param cond True if the execution is conditional, false otherwise. * @param len The number of bytes in the bytecode vector. */ static void bc_program_execStr(BcProgram* p, const char* restrict code, size_t* restrict bgn, bool cond, size_t len) { BcResult* r; char* str; BcFunc* f; BcInstPtr ip; size_t fidx; BcNum* n; assert(p->stack.len == p->tail_calls.len); // Check the stack. if (BC_ERR(!BC_PROG_STACK(&p->results, 1))) bc_err(BC_ERR_EXEC_STACK); assert(BC_PROG_STACK(&p->results, 1)); // Get the operand. bc_program_operand(p, &r, &n, 0); // If execution is conditional... if (cond) { bool exec; size_t then_idx; // These are volatile to quiet warnings on GCC about clobbering with // longjmp(). volatile size_t else_idx; volatile size_t idx; // Get the index of the "then" var and "else" var. then_idx = bc_program_index(code, bgn); else_idx = bc_program_index(code, bgn); // Figure out if we should execute. exec = (r->d.n.len != 0); idx = exec ? then_idx : else_idx; BC_SIG_LOCK; BC_SETJMP_LOCKED(vm, exit); // If we are supposed to execute, execute. If else_idx == SIZE_MAX, that // means there was no else clause, so if execute is false and else does // not exist, we don't execute. The goto skips all of the setup for the // execution. if (exec || (else_idx != SIZE_MAX)) { n = bc_vec_top(bc_program_vec(p, idx, BC_TYPE_VAR)); } else goto exit; if (BC_ERR(!BC_PROG_STR(n))) bc_err(BC_ERR_EXEC_TYPE); BC_UNSETJMP(vm); BC_SIG_UNLOCK; } else { // In non-conditional situations, only the top of stack can be executed, // and in those cases, variables are not allowed to be "on the stack"; // they are only put on the stack to be assigned to. assert(r->t != BC_RESULT_VAR); if (r->t != BC_RESULT_STR) return; } assert(BC_PROG_STR(n)); // Get the string. str = bc_program_string(p, n); // Get the function index and function. BC_SIG_LOCK; fidx = bc_program_insertFunc(p, str); BC_SIG_UNLOCK; f = bc_vec_item(&p->fns, fidx); // If the function has not been parsed yet... if (!f->code.len) { BC_SIG_LOCK; if (!BC_PARSE_IS_INITED(&vm->read_prs, p)) { bc_parse_init(&vm->read_prs, p, fidx); // Initialize this too because bc_vm_shutdown() expects them to be // initialized togther. bc_vec_init(&vm->read_buf, sizeof(char), BC_DTOR_NONE); } // This needs to be updated because the parser could have been used // somewhere else else bc_parse_updateFunc(&vm->read_prs, fidx); bc_lex_file(&vm->read_prs.l, vm->file); BC_SETJMP_LOCKED(vm, err); BC_SIG_UNLOCK; // Parse. Only one expression is needed, so stdin isn't used. bc_parse_text(&vm->read_prs, str, BC_MODE_FILE); BC_SIG_LOCK; vm->expr(&vm->read_prs, BC_PARSE_NOCALL); BC_UNSETJMP(vm); // We can just assert this here because // dc should parse everything until EOF. assert(vm->read_prs.l.t == BC_LEX_EOF); BC_SIG_UNLOCK; } // Set the instruction pointer. ip.idx = 0; ip.len = p->results.len; ip.func = fidx; BC_SIG_LOCK; // Pop the operand. bc_vec_pop(&p->results); // Tail call processing. This condition means that there is more on the // execution stack, and we are at the end of the bytecode vector, and the // last instruction is just a BC_INST_POP_EXEC, which would return. if (p->stack.len > 1 && *bgn == len - 1 && code[*bgn] == BC_INST_POP_EXEC) { size_t* call_ptr = bc_vec_top(&p->tail_calls); // Add one to the tail call. *call_ptr += 1; // Pop the execution stack before pushing the new instruction pointer // on. bc_vec_pop(&p->stack); } // If not a tail call, just push a new one. else bc_vec_push(&p->tail_calls, &ip.idx); // Push the new function onto the execution stack and return. bc_vec_push(&p->stack, &ip); BC_SIG_UNLOCK; return; err: BC_SIG_MAYLOCK; f = bc_vec_item(&p->fns, fidx); // Make sure to erase the bytecode vector so dc knows it is not parsed. bc_vec_popAll(&f->code); exit: bc_vec_pop(&p->results); BC_LONGJMP_CONT(vm); } /** * Prints every item on the results stack, one per line. * @param p The program. */ static void bc_program_printStack(BcProgram* p) { size_t idx; for (idx = 0; idx < p->results.len; ++idx) { bc_program_print(p, BC_INST_PRINT, idx); } } #endif // DC_ENABLED /** * Pushes the value of a global onto the results stack. * @param p The program. * @param inst Which global to push, as an instruction. */ static void bc_program_pushGlobal(BcProgram* p, uchar inst) { BcResultType t; // Make sure the instruction is valid. assert(inst >= BC_INST_IBASE && inst <= BC_INST_SCALE); // Push the global. t = inst - BC_INST_IBASE + BC_RESULT_IBASE; bc_program_pushBigdig(p, p->globals[inst - BC_INST_IBASE], t); } /** * Pushes the value of a global setting onto the stack. * @param p The program. * @param inst Which global setting to push, as an instruction. */ static void bc_program_globalSetting(BcProgram* p, uchar inst) { BcBigDig val; // Make sure the instruction is valid. #if DC_ENABLED assert((inst >= BC_INST_LINE_LENGTH && inst <= BC_INST_LEADING_ZERO) || (BC_IS_DC && inst == BC_INST_EXTENDED_REGISTERS)); #else // DC_ENABLED assert(inst >= BC_INST_LINE_LENGTH && inst <= BC_INST_LEADING_ZERO); #endif // DC_ENABLED if (inst == BC_INST_LINE_LENGTH) { val = (BcBigDig) vm->line_len; } #if BC_ENABLED else if (inst == BC_INST_GLOBAL_STACKS) { val = (BC_G != 0); } #endif // BC_ENABLED #if DC_ENABLED else if (inst == BC_INST_EXTENDED_REGISTERS) { val = (DC_X != 0); } #endif // DC_ENABLED else val = (BC_Z != 0); // Push the global. bc_program_pushBigdig(p, val, BC_RESULT_TEMP); } #if BC_ENABLE_EXTRA_MATH /** * Pushes the value of seed on the stack. * @param p The program. */ static void bc_program_pushSeed(BcProgram* p) { BcResult* res; res = bc_program_prepResult(p); res->t = BC_RESULT_SEED; BC_SIG_LOCK; // We need 2*BC_RAND_NUM_SIZE because of the size of the state. bc_num_init(&res->d.n, 2 * BC_RAND_NUM_SIZE); BC_SIG_UNLOCK; bc_num_createFromRNG(&res->d.n, &p->rng); } #endif // BC_ENABLE_EXTRA_MATH /** * Adds a function to the fns array. The function's ID must have already been * inserted into the map. * @param p The program. * @param id_ptr The ID of the function as inserted into the map. */ static void bc_program_addFunc(BcProgram* p, BcId* id_ptr) { BcFunc* f; BC_SIG_ASSERT_LOCKED; // Push and init. f = bc_vec_pushEmpty(&p->fns); bc_func_init(f, id_ptr->name); } size_t bc_program_insertFunc(BcProgram* p, const char* name) { BcId* id_ptr; bool new; size_t idx; BC_SIG_ASSERT_LOCKED; assert(p != NULL && name != NULL); // Insert into the map and get the resulting ID. new = bc_map_insert(&p->fn_map, name, p->fns.len, &idx); id_ptr = (BcId*) bc_vec_item(&p->fn_map, idx); idx = id_ptr->idx; // If the function is new... if (new) { // Add the function to the fns array. bc_program_addFunc(p, id_ptr); } #if BC_ENABLED // bc has to reset the function because it's about to be redefined. else if (BC_IS_BC) { BcFunc* func = bc_vec_item(&p->fns, idx); bc_func_reset(func); } #endif // BC_ENABLED return idx; } #if BC_DEBUG void bc_program_free(BcProgram* p) { #if BC_ENABLED size_t i; #endif // BC_ENABLED BC_SIG_ASSERT_LOCKED; assert(p != NULL); #if BC_ENABLED // Free the globals stacks. for (i = 0; i < BC_PROG_GLOBALS_LEN; ++i) { bc_vec_free(p->globals_v + i); } #endif // BC_ENABLED bc_vec_free(&p->fns); bc_vec_free(&p->fn_map); bc_vec_free(&p->vars); bc_vec_free(&p->var_map); bc_vec_free(&p->arrs); bc_vec_free(&p->arr_map); bc_vec_free(&p->results); bc_vec_free(&p->stack); bc_vec_free(&p->consts); bc_vec_free(&p->const_map); bc_vec_free(&p->strs); bc_vec_free(&p->str_map); bc_num_free(&p->asciify); #if BC_ENABLED if (BC_IS_BC) bc_num_free(&p->last); #endif // BC_ENABLED #if BC_ENABLE_EXTRA_MATH bc_rand_free(&p->rng); #endif // BC_ENABLE_EXTRA_MATH #if DC_ENABLED if (BC_IS_DC) bc_vec_free(&p->tail_calls); #endif // DC_ENABLED } #endif // BC_DEBUG void bc_program_init(BcProgram* p) { BcInstPtr ip; size_t i; BC_SIG_ASSERT_LOCKED; assert(p != NULL); // We want this clear. // NOLINTNEXTLINE memset(&ip, 0, sizeof(BcInstPtr)); // Setup the globals stacks and the current values. for (i = 0; i < BC_PROG_GLOBALS_LEN; ++i) { BcBigDig val = i == BC_PROG_GLOBALS_SCALE ? 0 : BC_BASE; #if BC_ENABLED bc_vec_init(p->globals_v + i, sizeof(BcBigDig), BC_DTOR_NONE); bc_vec_push(p->globals_v + i, &val); #endif // BC_ENABLED p->globals[i] = val; } #if DC_ENABLED // dc-only setup. if (BC_IS_DC) { bc_vec_init(&p->tail_calls, sizeof(size_t), BC_DTOR_NONE); // We want an item for the main function on the tail call stack. i = 0; bc_vec_push(&p->tail_calls, &i); } #endif // DC_ENABLED bc_num_setup(&p->strmb, p->strmb_num, BC_NUM_BIGDIG_LOG10); bc_num_bigdig2num(&p->strmb, BC_NUM_STREAM_BASE); bc_num_init(&p->asciify, BC_NUM_DEF_SIZE); #if BC_ENABLE_EXTRA_MATH // We need to initialize srand() just in case /dev/urandom and /dev/random // are not available. srand((unsigned int) time(NULL)); bc_rand_init(&p->rng); #endif // BC_ENABLE_EXTRA_MATH #if BC_ENABLED if (BC_IS_BC) bc_num_init(&p->last, BC_NUM_DEF_SIZE); #endif // BC_ENABLED #if BC_DEBUG bc_vec_init(&p->fns, sizeof(BcFunc), BC_DTOR_FUNC); #else // BC_DEBUG bc_vec_init(&p->fns, sizeof(BcFunc), BC_DTOR_NONE); #endif // BC_DEBUG bc_map_init(&p->fn_map); bc_program_insertFunc(p, bc_func_main); bc_program_insertFunc(p, bc_func_read); bc_vec_init(&p->vars, sizeof(BcVec), BC_DTOR_VEC); bc_map_init(&p->var_map); bc_vec_init(&p->arrs, sizeof(BcVec), BC_DTOR_VEC); bc_map_init(&p->arr_map); bc_vec_init(&p->results, sizeof(BcResult), BC_DTOR_RESULT); // Push the first instruction pointer onto the execution stack. bc_vec_init(&p->stack, sizeof(BcInstPtr), BC_DTOR_NONE); bc_vec_push(&p->stack, &ip); bc_vec_init(&p->consts, sizeof(BcConst), BC_DTOR_CONST); bc_map_init(&p->const_map); bc_vec_init(&p->strs, sizeof(char*), BC_DTOR_NONE); bc_map_init(&p->str_map); } void bc_program_printStackTrace(BcProgram* p) { size_t i, max_digits; max_digits = bc_vm_numDigits(p->stack.len - 1); for (i = 0; i < p->stack.len; ++i) { BcInstPtr* ip = bc_vec_item_rev(&p->stack, i); BcFunc* f = bc_vec_item(&p->fns, ip->func); size_t j, digits; digits = bc_vm_numDigits(i); bc_file_puts(&vm->ferr, bc_flush_none, " "); for (j = 0; j < max_digits - digits; ++j) { bc_file_putchar(&vm->ferr, bc_flush_none, ' '); } bc_file_printf(&vm->ferr, "%zu: %s", i, f->name); #if BC_ENABLED if (BC_IS_BC && ip->func != BC_PROG_MAIN && ip->func != BC_PROG_READ) { bc_file_puts(&vm->ferr, bc_flush_none, "()"); } #endif // BC_ENABLED bc_file_putchar(&vm->ferr, bc_flush_none, '\n'); } } void bc_program_reset(BcProgram* p) { BcFunc* f; BcInstPtr* ip; BC_SIG_ASSERT_LOCKED; // Pop all but the last execution and all results. bc_vec_npop(&p->stack, p->stack.len - 1); bc_vec_popAll(&p->results); #if DC_ENABLED // We need to pop tail calls too. if (BC_IS_DC) bc_vec_npop(&p->tail_calls, p->tail_calls.len - 1); #endif // DC_ENABLED #if BC_ENABLED // Clear the globals' stacks. if (BC_G) bc_program_popGlobals(p, true); #endif // BC_ENABLED // Clear the bytecode vector of the main function. f = bc_vec_item(&p->fns, BC_PROG_MAIN); bc_vec_npop(&f->code, f->code.len); // Reset the instruction pointer. ip = bc_vec_top(&p->stack); // NOLINTNEXTLINE memset(ip, 0, sizeof(BcInstPtr)); if (BC_SIG_INTERRUPT(vm)) { // Write the ready message for a signal. bc_file_printf(&vm->fout, "%s", bc_program_ready_msg); bc_file_flush(&vm->fout, bc_flush_err); } // Clear the signal. vm->sig = 0; } void bc_program_exec(BcProgram* p) { size_t idx; BcResult r; BcResult* ptr; BcInstPtr* ip; BcFunc* func; char* code; bool cond = false; uchar inst; #if BC_ENABLED BcNum* num; #endif // BC_ENABLED #if !BC_HAS_COMPUTED_GOTO #if BC_DEBUG size_t jmp_bufs_len; #endif // BC_DEBUG #endif // !BC_HAS_COMPUTED_GOTO #if BC_HAS_COMPUTED_GOTO #if BC_GCC #pragma GCC diagnostic ignored "-Wpedantic" #endif // BC_GCC #if BC_CLANG #pragma clang diagnostic ignored "-Wgnu-label-as-value" #endif // BC_CLANG BC_PROG_LBLS; BC_PROG_LBLS_ASSERT; #if BC_CLANG #pragma clang diagnostic warning "-Wgnu-label-as-value" #endif // BC_CLANG #if BC_GCC #pragma GCC diagnostic warning "-Wpedantic" #endif // BC_GCC // BC_INST_INVALID is a marker for the end so that we don't have to have an // execution loop. func = (BcFunc*) bc_vec_item(&p->fns, BC_PROG_MAIN); bc_vec_pushByte(&func->code, BC_INST_INVALID); #endif // BC_HAS_COMPUTED_GOTO BC_SETJMP(vm, end); ip = bc_vec_top(&p->stack); func = (BcFunc*) bc_vec_item(&p->fns, ip->func); code = func->code.v; #if !BC_HAS_COMPUTED_GOTO #if BC_DEBUG jmp_bufs_len = vm->jmp_bufs.len; #endif // BC_DEBUG // This loop is the heart of the execution engine. It *is* the engine. For // computed goto, it is ignored. while (ip->idx < func->code.len) #endif // !BC_HAS_COMPUTED_GOTO { BC_SIG_ASSERT_NOT_LOCKED; #if BC_HAS_COMPUTED_GOTO #if BC_GCC #pragma GCC diagnostic ignored "-Wpedantic" #endif // BC_GCC #if BC_CLANG #pragma clang diagnostic ignored "-Wgnu-label-as-value" #endif // BC_CLANG BC_PROG_JUMP(inst, code, ip); #else // BC_HAS_COMPUTED_GOTO // Get the next instruction and increment the index. inst = (uchar) code[(ip->idx)++]; #endif // BC_HAS_COMPUTED_GOTO #if BC_DEBUG_CODE bc_file_printf(&vm->ferr, "inst: %s\n", bc_inst_names[inst]); bc_file_flush(&vm->ferr, bc_flush_none); #endif // BC_DEBUG_CODE #if !BC_HAS_COMPUTED_GOTO switch (inst) #endif // !BC_HAS_COMPUTED_GOTO { #if BC_ENABLED // This just sets up the condition for the unconditional jump below, // which checks the condition, if necessary. // clang-format off BC_PROG_LBL(BC_INST_JUMP_ZERO): // clang-format on { bc_program_prep(p, &ptr, &num, 0); cond = !bc_num_cmpZero(num); bc_vec_pop(&p->results); BC_PROG_DIRECT_JUMP(BC_INST_JUMP) } // Fallthrough. BC_PROG_FALLTHROUGH // clang-format off BC_PROG_LBL(BC_INST_JUMP): // clang-format on { idx = bc_program_index(code, &ip->idx); // If a jump is required... if (inst == BC_INST_JUMP || cond) { // Get the address to jump to. size_t* addr = bc_vec_item(&func->labels, idx); // If this fails, then the parser failed to set up the // labels correctly. assert(*addr != SIZE_MAX); // Set the new address. ip->idx = *addr; } BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_CALL): // clang-format on { assert(BC_IS_BC); bc_program_call(p, code, &ip->idx); // Because we changed the execution stack and where we are // executing, we have to update all of this. BC_SIG_LOCK; ip = bc_vec_top(&p->stack); func = bc_vec_item(&p->fns, ip->func); code = func->code.v; BC_SIG_UNLOCK; BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_INC): BC_PROG_LBL(BC_INST_DEC): // clang-format on { bc_program_incdec(p, inst); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_HALT): // clang-format on { vm->status = BC_STATUS_QUIT; // Just jump out. The jump series will take care of everything. BC_JMP; BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_RET): BC_PROG_LBL(BC_INST_RET0): BC_PROG_LBL(BC_INST_RET_VOID): // clang-format on { bc_program_return(p, inst); // Because we changed the execution stack and where we are // executing, we have to update all of this. BC_SIG_LOCK; ip = bc_vec_top(&p->stack); func = bc_vec_item(&p->fns, ip->func); code = func->code.v; BC_SIG_UNLOCK; BC_PROG_JUMP(inst, code, ip); } #endif // BC_ENABLED // clang-format off BC_PROG_LBL(BC_INST_BOOL_OR): BC_PROG_LBL(BC_INST_BOOL_AND): BC_PROG_LBL(BC_INST_REL_EQ): BC_PROG_LBL(BC_INST_REL_LE): BC_PROG_LBL(BC_INST_REL_GE): BC_PROG_LBL(BC_INST_REL_NE): BC_PROG_LBL(BC_INST_REL_LT): BC_PROG_LBL(BC_INST_REL_GT): // clang-format on { bc_program_logical(p, inst); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_READ): // clang-format on { // We want to flush output before // this in case there is a prompt. bc_file_flush(&vm->fout, bc_flush_save); bc_program_read(p); // Because we changed the execution stack and where we are // executing, we have to update all of this. BC_SIG_LOCK; ip = bc_vec_top(&p->stack); func = bc_vec_item(&p->fns, ip->func); code = func->code.v; BC_SIG_UNLOCK; BC_PROG_JUMP(inst, code, ip); } #if BC_ENABLE_EXTRA_MATH // clang-format off BC_PROG_LBL(BC_INST_RAND): // clang-format on { bc_program_rand(p); BC_PROG_JUMP(inst, code, ip); } #endif // BC_ENABLE_EXTRA_MATH // clang-format off BC_PROG_LBL(BC_INST_MAXIBASE): BC_PROG_LBL(BC_INST_MAXOBASE): BC_PROG_LBL(BC_INST_MAXSCALE): #if BC_ENABLE_EXTRA_MATH BC_PROG_LBL(BC_INST_MAXRAND): #endif // BC_ENABLE_EXTRA_MATH // clang-format on { BcBigDig dig = vm->maxes[inst - BC_INST_MAXIBASE]; bc_program_pushBigdig(p, dig, BC_RESULT_TEMP); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_LINE_LENGTH): #if BC_ENABLED BC_PROG_LBL(BC_INST_GLOBAL_STACKS): #endif // BC_ENABLED #if DC_ENABLED BC_PROG_LBL(BC_INST_EXTENDED_REGISTERS): #endif // DC_ENABLE BC_PROG_LBL(BC_INST_LEADING_ZERO): // clang-format on { bc_program_globalSetting(p, inst); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_VAR): // clang-format on { bc_program_pushVar(p, code, &ip->idx, false, false); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_ARRAY_ELEM): BC_PROG_LBL(BC_INST_ARRAY): // clang-format on { bc_program_pushArray(p, code, &ip->idx, inst); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_IBASE): BC_PROG_LBL(BC_INST_SCALE): BC_PROG_LBL(BC_INST_OBASE): // clang-format on { bc_program_pushGlobal(p, inst); BC_PROG_JUMP(inst, code, ip); } #if BC_ENABLE_EXTRA_MATH // clang-format off BC_PROG_LBL(BC_INST_SEED): // clang-format on { bc_program_pushSeed(p); BC_PROG_JUMP(inst, code, ip); } #endif // BC_ENABLE_EXTRA_MATH // clang-format off BC_PROG_LBL(BC_INST_LENGTH): BC_PROG_LBL(BC_INST_SCALE_FUNC): BC_PROG_LBL(BC_INST_SQRT): BC_PROG_LBL(BC_INST_ABS): BC_PROG_LBL(BC_INST_IS_NUMBER): BC_PROG_LBL(BC_INST_IS_STRING): #if BC_ENABLE_EXTRA_MATH BC_PROG_LBL(BC_INST_IRAND): #endif // BC_ENABLE_EXTRA_MATH // clang-format on { bc_program_builtin(p, inst); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_ASCIIFY): // clang-format on { bc_program_asciify(p); // Because we changed the execution stack and where we are // executing, we have to update all of this. BC_SIG_LOCK; ip = bc_vec_top(&p->stack); func = bc_vec_item(&p->fns, ip->func); code = func->code.v; BC_SIG_UNLOCK; BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_NUM): // clang-format on { bc_program_const(p, code, &ip->idx); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_ZERO): BC_PROG_LBL(BC_INST_ONE): #if BC_ENABLED BC_PROG_LBL(BC_INST_LAST): #endif // BC_ENABLED // clang-format on { r.t = BC_RESULT_ZERO + (inst - BC_INST_ZERO); bc_vec_push(&p->results, &r); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_PRINT): BC_PROG_LBL(BC_INST_PRINT_POP): #if BC_ENABLED BC_PROG_LBL(BC_INST_PRINT_STR): #endif // BC_ENABLED // clang-format on { bc_program_print(p, inst, 0); // We want to flush right away to save the output for history, // if history must preserve it when taking input. bc_file_flush(&vm->fout, bc_flush_save); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_STR): // clang-format on { // Set up the result and push. r.t = BC_RESULT_STR; bc_num_clear(&r.d.n); r.d.n.scale = bc_program_index(code, &ip->idx); bc_vec_push(&p->results, &r); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_POWER): BC_PROG_LBL(BC_INST_MULTIPLY): BC_PROG_LBL(BC_INST_DIVIDE): BC_PROG_LBL(BC_INST_MODULUS): BC_PROG_LBL(BC_INST_PLUS): BC_PROG_LBL(BC_INST_MINUS): #if BC_ENABLE_EXTRA_MATH BC_PROG_LBL(BC_INST_PLACES): BC_PROG_LBL(BC_INST_LSHIFT): BC_PROG_LBL(BC_INST_RSHIFT): #endif // BC_ENABLE_EXTRA_MATH // clang-format on { bc_program_op(p, inst); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_NEG): BC_PROG_LBL(BC_INST_BOOL_NOT): #if BC_ENABLE_EXTRA_MATH BC_PROG_LBL(BC_INST_TRUNC): #endif // BC_ENABLE_EXTRA_MATH // clang-format on { bc_program_unary(p, inst); BC_PROG_JUMP(inst, code, ip); } // clang-format off #if BC_ENABLED BC_PROG_LBL(BC_INST_ASSIGN_POWER): BC_PROG_LBL(BC_INST_ASSIGN_MULTIPLY): BC_PROG_LBL(BC_INST_ASSIGN_DIVIDE): BC_PROG_LBL(BC_INST_ASSIGN_MODULUS): BC_PROG_LBL(BC_INST_ASSIGN_PLUS): BC_PROG_LBL(BC_INST_ASSIGN_MINUS): #if BC_ENABLE_EXTRA_MATH BC_PROG_LBL(BC_INST_ASSIGN_PLACES): BC_PROG_LBL(BC_INST_ASSIGN_LSHIFT): BC_PROG_LBL(BC_INST_ASSIGN_RSHIFT): #endif // BC_ENABLE_EXTRA_MATH BC_PROG_LBL(BC_INST_ASSIGN): BC_PROG_LBL(BC_INST_ASSIGN_POWER_NO_VAL): BC_PROG_LBL(BC_INST_ASSIGN_MULTIPLY_NO_VAL): BC_PROG_LBL(BC_INST_ASSIGN_DIVIDE_NO_VAL): BC_PROG_LBL(BC_INST_ASSIGN_MODULUS_NO_VAL): BC_PROG_LBL(BC_INST_ASSIGN_PLUS_NO_VAL): BC_PROG_LBL(BC_INST_ASSIGN_MINUS_NO_VAL): #if BC_ENABLE_EXTRA_MATH BC_PROG_LBL(BC_INST_ASSIGN_PLACES_NO_VAL): BC_PROG_LBL(BC_INST_ASSIGN_LSHIFT_NO_VAL): BC_PROG_LBL(BC_INST_ASSIGN_RSHIFT_NO_VAL): #endif // BC_ENABLE_EXTRA_MATH #endif // BC_ENABLED BC_PROG_LBL(BC_INST_ASSIGN_NO_VAL): // clang-format on { bc_program_assign(p, inst); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_POP): // clang-format on { #ifndef BC_PROG_NO_STACK_CHECK // dc must do a stack check, but bc does not. if (BC_IS_DC) { if (BC_ERR(!BC_PROG_STACK(&p->results, 1))) { bc_err(BC_ERR_EXEC_STACK); } } #endif // BC_PROG_NO_STACK_CHECK assert(BC_PROG_STACK(&p->results, 1)); bc_vec_pop(&p->results); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_SWAP): // clang-format on { BcResult* ptr2; // Check the stack. if (BC_ERR(!BC_PROG_STACK(&p->results, 2))) { bc_err(BC_ERR_EXEC_STACK); } assert(BC_PROG_STACK(&p->results, 2)); // Get the two items. ptr = bc_vec_item_rev(&p->results, 0); ptr2 = bc_vec_item_rev(&p->results, 1); // Swap. It's just easiest to do it this way. // NOLINTNEXTLINE memcpy(&r, ptr, sizeof(BcResult)); // NOLINTNEXTLINE memcpy(ptr, ptr2, sizeof(BcResult)); // NOLINTNEXTLINE memcpy(ptr2, &r, sizeof(BcResult)); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_MODEXP): // clang-format on { bc_program_modexp(p); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_DIVMOD): // clang-format on { bc_program_divmod(p); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_PRINT_STREAM): // clang-format on { bc_program_printStream(p); BC_PROG_JUMP(inst, code, ip); } #if DC_ENABLED // clang-format off BC_PROG_LBL(BC_INST_POP_EXEC): // clang-format on { // If this fails, the dc parser got something wrong. assert(BC_PROG_STACK(&p->stack, 2)); // Pop the execution stack and tail call stack. bc_vec_pop(&p->stack); bc_vec_pop(&p->tail_calls); // Because we changed the execution stack and where we are // executing, we have to update all of this. BC_SIG_LOCK; ip = bc_vec_top(&p->stack); func = bc_vec_item(&p->fns, ip->func); code = func->code.v; BC_SIG_UNLOCK; BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_EXECUTE): BC_PROG_LBL(BC_INST_EXEC_COND): // clang-format on { cond = (inst == BC_INST_EXEC_COND); bc_program_execStr(p, code, &ip->idx, cond, func->code.len); // Because we changed the execution stack and where we are // executing, we have to update all of this. BC_SIG_LOCK; ip = bc_vec_top(&p->stack); func = bc_vec_item(&p->fns, ip->func); code = func->code.v; BC_SIG_UNLOCK; BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_PRINT_STACK): // clang-format on { bc_program_printStack(p); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_CLEAR_STACK): // clang-format on { bc_vec_popAll(&p->results); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_REG_STACK_LEN): // clang-format on { bc_program_regStackLen(p, code, &ip->idx); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_STACK_LEN): // clang-format on { bc_program_stackLen(p); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_DUPLICATE): // clang-format on { // Check the stack. if (BC_ERR(!BC_PROG_STACK(&p->results, 1))) { bc_err(BC_ERR_EXEC_STACK); } assert(BC_PROG_STACK(&p->results, 1)); // Get the top of the stack. ptr = bc_vec_top(&p->results); BC_SIG_LOCK; // Copy and push. bc_result_copy(&r, ptr); bc_vec_push(&p->results, &r); BC_SIG_UNLOCK; BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_LOAD): BC_PROG_LBL(BC_INST_PUSH_VAR): // clang-format on { bool copy = (inst == BC_INST_LOAD); bc_program_pushVar(p, code, &ip->idx, true, copy); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_PUSH_TO_VAR): // clang-format on { idx = bc_program_index(code, &ip->idx); bc_program_copyToVar(p, idx, BC_TYPE_VAR); BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_QUIT): BC_PROG_LBL(BC_INST_NQUIT): // clang-format on { bc_program_nquit(p, inst); // Because we changed the execution stack and where we are // executing, we have to update all of this. BC_SIG_LOCK; ip = bc_vec_top(&p->stack); func = bc_vec_item(&p->fns, ip->func); code = func->code.v; BC_SIG_UNLOCK; BC_PROG_JUMP(inst, code, ip); } // clang-format off BC_PROG_LBL(BC_INST_EXEC_STACK_LEN): // clang-format on { bc_program_execStackLen(p); BC_PROG_JUMP(inst, code, ip); } #endif // DC_ENABLED #if BC_HAS_COMPUTED_GOTO // clang-format off BC_PROG_LBL(BC_INST_INVALID): // clang-format on { goto end; } #else // BC_HAS_COMPUTED_GOTO default: { BC_UNREACHABLE #if BC_DEBUG && !BC_CLANG abort(); #endif // BC_DEBUG && !BC_CLANG } #endif // BC_HAS_COMPUTED_GOTO } #if BC_HAS_COMPUTED_GOTO #if BC_CLANG #pragma clang diagnostic warning "-Wgnu-label-as-value" #endif // BC_CLANG #if BC_GCC #pragma GCC diagnostic warning "-Wpedantic" #endif // BC_GCC #else // BC_HAS_COMPUTED_GOTO #if BC_DEBUG // This is to allow me to use a debugger to see the last instruction, // which will point to which function was the problem. But it's also a // good smoke test for error handling changes. assert(jmp_bufs_len == vm->jmp_bufs.len); #endif // BC_DEBUG #endif // BC_HAS_COMPUTED_GOTO } end: BC_SIG_MAYLOCK; // This is here just to print a stack trace on interrupts. This is for // finding infinite loops. if (BC_SIG_INTERRUPT(vm)) { BcStatus s; bc_file_putchar(&vm->ferr, bc_flush_none, '\n'); bc_program_printStackTrace(p); s = bc_file_flushErr(&vm->ferr, bc_flush_err); if (BC_ERR(s != BC_STATUS_SUCCESS && vm->status == BC_STATUS_SUCCESS)) { vm->status = (sig_atomic_t) s; } } BC_LONGJMP_CONT(vm); } #if BC_DEBUG_CODE #if BC_ENABLED && DC_ENABLED void bc_program_printStackDebug(BcProgram* p) { bc_file_puts(&vm->fout, bc_flush_err, "-------------- Stack ----------\n"); bc_program_printStack(p); bc_file_puts(&vm->fout, bc_flush_err, "-------------- Stack End ------\n"); } static void bc_program_printIndex(const char* restrict code, size_t* restrict bgn) { uchar byte, i, bytes = (uchar) code[(*bgn)++]; ulong val = 0; for (byte = 1, i = 0; byte && i < bytes; ++i) { byte = (uchar) code[(*bgn)++]; if (byte) val |= ((ulong) byte) << (CHAR_BIT * i); } bc_vm_printf(" (%lu) ", val); } static void bc_program_printStr(const BcProgram* p, const char* restrict code, size_t* restrict bgn) { size_t idx = bc_program_index(code, bgn); char* s; s = *((char**) bc_vec_item(p->strs, idx)); bc_vm_printf(" (\"%s\") ", s); } void bc_program_printInst(const BcProgram* p, const char* restrict code, size_t* restrict bgn) { uchar inst = (uchar) code[(*bgn)++]; bc_vm_printf("Inst[%zu]: %s [%lu]; ", *bgn - 1, bc_inst_names[inst], (unsigned long) inst); if (inst == BC_INST_VAR || inst == BC_INST_ARRAY_ELEM || inst == BC_INST_ARRAY) { bc_program_printIndex(code, bgn); } else if (inst == BC_INST_STR) bc_program_printStr(p, code, bgn); else if (inst == BC_INST_NUM) { size_t idx = bc_program_index(code, bgn); BcConst* c = bc_vec_item(p->consts, idx); bc_vm_printf("(%s)", c->val); } else if (inst == BC_INST_CALL || (inst > BC_INST_STR && inst <= BC_INST_JUMP_ZERO)) { bc_program_printIndex(code, bgn); if (inst == BC_INST_CALL) bc_program_printIndex(code, bgn); } bc_vm_putchar('\n', bc_flush_err); } void bc_program_code(const BcProgram* p) { BcFunc* f; char* code; BcInstPtr ip; size_t i; for (i = 0; i < p->fns.len; ++i) { ip.idx = ip.len = 0; ip.func = i; f = bc_vec_item(&p->fns, ip.func); code = f->code.v; bc_vm_printf("func[%zu]:\n", ip.func); while (ip.idx < f->code.len) { bc_program_printInst(p, code, &ip.idx); } bc_file_puts(&vm->fout, bc_flush_err, "\n\n"); } } #endif // BC_ENABLED && DC_ENABLED #endif // BC_DEBUG_CODE