//===- AArch64FrameLowering.cpp - AArch64 Frame Lowering -------*- C++ -*-====// // // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. // See https://llvm.org/LICENSE.txt for license information. // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception // //===----------------------------------------------------------------------===// // // This file contains the AArch64 implementation of TargetFrameLowering class. // // On AArch64, stack frames are structured as follows: // // The stack grows downward. // // All of the individual frame areas on the frame below are optional, i.e. it's // possible to create a function so that the particular area isn't present // in the frame. // // At function entry, the "frame" looks as follows: // // | | Higher address // |-----------------------------------| // | | // | arguments passed on the stack | // | | // |-----------------------------------| <- sp // | | Lower address // // // After the prologue has run, the frame has the following general structure. // Note that this doesn't depict the case where a red-zone is used. Also, // technically the last frame area (VLAs) doesn't get created until in the // main function body, after the prologue is run. However, it's depicted here // for completeness. // // | | Higher address // |-----------------------------------| // | | // | arguments passed on the stack | // | | // |-----------------------------------| // | | // | (Win64 only) varargs from reg | // | | // |-----------------------------------| // | | // | callee-saved gpr registers | <--. // | | | On Darwin platforms these // |- - - - - - - - - - - - - - - - - -| | callee saves are swapped, // | | | (frame record first) // | prev_fp, prev_lr | <--' // | (a.k.a. "frame record") | // |-----------------------------------| <- fp(=x29) // | | // | callee-saved fp/simd/SVE regs | // | | // |-----------------------------------| // | | // | SVE stack objects | // | | // |-----------------------------------| // |.empty.space.to.make.part.below....| // |.aligned.in.case.it.needs.more.than| (size of this area is unknown at // |.the.standard.16-byte.alignment....| compile time; if present) // |-----------------------------------| // | | // | local variables of fixed size | // | including spill slots | // |-----------------------------------| <- bp(not defined by ABI, // |.variable-sized.local.variables....| LLVM chooses X19) // |.(VLAs)............................| (size of this area is unknown at // |...................................| compile time) // |-----------------------------------| <- sp // | | Lower address // // // To access the data in a frame, at-compile time, a constant offset must be // computable from one of the pointers (fp, bp, sp) to access it. The size // of the areas with a dotted background cannot be computed at compile-time // if they are present, making it required to have all three of fp, bp and // sp to be set up to be able to access all contents in the frame areas, // assuming all of the frame areas are non-empty. // // For most functions, some of the frame areas are empty. For those functions, // it may not be necessary to set up fp or bp: // * A base pointer is definitely needed when there are both VLAs and local // variables with more-than-default alignment requirements. // * A frame pointer is definitely needed when there are local variables with // more-than-default alignment requirements. // // For Darwin platforms the frame-record (fp, lr) is stored at the top of the // callee-saved area, since the unwind encoding does not allow for encoding // this dynamically and existing tools depend on this layout. For other // platforms, the frame-record is stored at the bottom of the (gpr) callee-saved // area to allow SVE stack objects (allocated directly below the callee-saves, // if available) to be accessed directly from the framepointer. // The SVE spill/fill instructions have VL-scaled addressing modes such // as: // ldr z8, [fp, #-7 mul vl] // For SVE the size of the vector length (VL) is not known at compile-time, so // '#-7 mul vl' is an offset that can only be evaluated at runtime. With this // layout, we don't need to add an unscaled offset to the framepointer before // accessing the SVE object in the frame. // // In some cases when a base pointer is not strictly needed, it is generated // anyway when offsets from the frame pointer to access local variables become // so large that the offset can't be encoded in the immediate fields of loads // or stores. // // FIXME: also explain the redzone concept. // FIXME: also explain the concept of reserved call frames. // //===----------------------------------------------------------------------===// #include "AArch64FrameLowering.h" #include "AArch64InstrInfo.h" #include "AArch64MachineFunctionInfo.h" #include "AArch64RegisterInfo.h" #include "AArch64StackOffset.h" #include "AArch64Subtarget.h" #include "AArch64TargetMachine.h" #include "MCTargetDesc/AArch64AddressingModes.h" #include "llvm/ADT/ScopeExit.h" #include "llvm/ADT/SmallVector.h" #include "llvm/ADT/Statistic.h" #include "llvm/CodeGen/LivePhysRegs.h" #include "llvm/CodeGen/MachineBasicBlock.h" #include "llvm/CodeGen/MachineFrameInfo.h" #include "llvm/CodeGen/MachineFunction.h" #include "llvm/CodeGen/MachineInstr.h" #include "llvm/CodeGen/MachineInstrBuilder.h" #include "llvm/CodeGen/MachineMemOperand.h" #include "llvm/CodeGen/MachineModuleInfo.h" #include "llvm/CodeGen/MachineOperand.h" #include "llvm/CodeGen/MachineRegisterInfo.h" #include "llvm/CodeGen/RegisterScavenging.h" #include "llvm/CodeGen/TargetInstrInfo.h" #include "llvm/CodeGen/TargetRegisterInfo.h" #include "llvm/CodeGen/TargetSubtargetInfo.h" #include "llvm/CodeGen/WinEHFuncInfo.h" #include "llvm/IR/Attributes.h" #include "llvm/IR/CallingConv.h" #include "llvm/IR/DataLayout.h" #include "llvm/IR/DebugLoc.h" #include "llvm/IR/Function.h" #include "llvm/MC/MCAsmInfo.h" #include "llvm/MC/MCDwarf.h" #include "llvm/Support/CommandLine.h" #include "llvm/Support/Debug.h" #include "llvm/Support/ErrorHandling.h" #include "llvm/Support/MathExtras.h" #include "llvm/Support/raw_ostream.h" #include "llvm/Target/TargetMachine.h" #include "llvm/Target/TargetOptions.h" #include #include #include #include using namespace llvm; #define DEBUG_TYPE "frame-info" static cl::opt EnableRedZone("aarch64-redzone", cl::desc("enable use of redzone on AArch64"), cl::init(false), cl::Hidden); static cl::opt ReverseCSRRestoreSeq("reverse-csr-restore-seq", cl::desc("reverse the CSR restore sequence"), cl::init(false), cl::Hidden); STATISTIC(NumRedZoneFunctions, "Number of functions using red zone"); /// This is the biggest offset to the stack pointer we can encode in aarch64 /// instructions (without using a separate calculation and a temp register). /// Note that the exception here are vector stores/loads which cannot encode any /// displacements (see estimateRSStackSizeLimit(), isAArch64FrameOffsetLegal()). static const unsigned DefaultSafeSPDisplacement = 255; /// Look at each instruction that references stack frames and return the stack /// size limit beyond which some of these instructions will require a scratch /// register during their expansion later. static unsigned estimateRSStackSizeLimit(MachineFunction &MF) { // FIXME: For now, just conservatively guestimate based on unscaled indexing // range. We'll end up allocating an unnecessary spill slot a lot, but // realistically that's not a big deal at this stage of the game. for (MachineBasicBlock &MBB : MF) { for (MachineInstr &MI : MBB) { if (MI.isDebugInstr() || MI.isPseudo() || MI.getOpcode() == AArch64::ADDXri || MI.getOpcode() == AArch64::ADDSXri) continue; for (const MachineOperand &MO : MI.operands()) { if (!MO.isFI()) continue; StackOffset Offset; if (isAArch64FrameOffsetLegal(MI, Offset, nullptr, nullptr, nullptr) == AArch64FrameOffsetCannotUpdate) return 0; } } } return DefaultSafeSPDisplacement; } /// Returns the size of the entire SVE stackframe (calleesaves + spills). static StackOffset getSVEStackSize(const MachineFunction &MF) { const AArch64FunctionInfo *AFI = MF.getInfo(); return {(int64_t)AFI->getStackSizeSVE(), MVT::nxv1i8}; } bool AArch64FrameLowering::canUseRedZone(const MachineFunction &MF) const { if (!EnableRedZone) return false; // Don't use the red zone if the function explicitly asks us not to. // This is typically used for kernel code. if (MF.getFunction().hasFnAttribute(Attribute::NoRedZone)) return false; const MachineFrameInfo &MFI = MF.getFrameInfo(); const AArch64FunctionInfo *AFI = MF.getInfo(); unsigned NumBytes = AFI->getLocalStackSize(); return !(MFI.hasCalls() || hasFP(MF) || NumBytes > 128 || getSVEStackSize(MF)); } /// hasFP - Return true if the specified function should have a dedicated frame /// pointer register. bool AArch64FrameLowering::hasFP(const MachineFunction &MF) const { const MachineFrameInfo &MFI = MF.getFrameInfo(); const TargetRegisterInfo *RegInfo = MF.getSubtarget().getRegisterInfo(); // Win64 EH requires a frame pointer if funclets are present, as the locals // are accessed off the frame pointer in both the parent function and the // funclets. if (MF.hasEHFunclets()) return true; // Retain behavior of always omitting the FP for leaf functions when possible. if (MFI.hasCalls() && MF.getTarget().Options.DisableFramePointerElim(MF)) return true; if (MFI.hasVarSizedObjects() || MFI.isFrameAddressTaken() || MFI.hasStackMap() || MFI.hasPatchPoint() || RegInfo->needsStackRealignment(MF)) return true; // With large callframes around we may need to use FP to access the scavenging // emergency spillslot. // // Unfortunately some calls to hasFP() like machine verifier -> // getReservedReg() -> hasFP in the middle of global isel are too early // to know the max call frame size. Hopefully conservatively returning "true" // in those cases is fine. // DefaultSafeSPDisplacement is fine as we only emergency spill GP regs. if (!MFI.isMaxCallFrameSizeComputed() || MFI.getMaxCallFrameSize() > DefaultSafeSPDisplacement) return true; return false; } /// hasReservedCallFrame - Under normal circumstances, when a frame pointer is /// not required, we reserve argument space for call sites in the function /// immediately on entry to the current function. This eliminates the need for /// add/sub sp brackets around call sites. Returns true if the call frame is /// included as part of the stack frame. bool AArch64FrameLowering::hasReservedCallFrame(const MachineFunction &MF) const { return !MF.getFrameInfo().hasVarSizedObjects(); } MachineBasicBlock::iterator AArch64FrameLowering::eliminateCallFramePseudoInstr( MachineFunction &MF, MachineBasicBlock &MBB, MachineBasicBlock::iterator I) const { const AArch64InstrInfo *TII = static_cast(MF.getSubtarget().getInstrInfo()); DebugLoc DL = I->getDebugLoc(); unsigned Opc = I->getOpcode(); bool IsDestroy = Opc == TII->getCallFrameDestroyOpcode(); uint64_t CalleePopAmount = IsDestroy ? I->getOperand(1).getImm() : 0; if (!hasReservedCallFrame(MF)) { unsigned Align = getStackAlignment(); int64_t Amount = I->getOperand(0).getImm(); Amount = alignTo(Amount, Align); if (!IsDestroy) Amount = -Amount; // N.b. if CalleePopAmount is valid but zero (i.e. callee would pop, but it // doesn't have to pop anything), then the first operand will be zero too so // this adjustment is a no-op. if (CalleePopAmount == 0) { // FIXME: in-function stack adjustment for calls is limited to 24-bits // because there's no guaranteed temporary register available. // // ADD/SUB (immediate) has only LSL #0 and LSL #12 available. // 1) For offset <= 12-bit, we use LSL #0 // 2) For 12-bit <= offset <= 24-bit, we use two instructions. One uses // LSL #0, and the other uses LSL #12. // // Most call frames will be allocated at the start of a function so // this is OK, but it is a limitation that needs dealing with. assert(Amount > -0xffffff && Amount < 0xffffff && "call frame too large"); emitFrameOffset(MBB, I, DL, AArch64::SP, AArch64::SP, {Amount, MVT::i8}, TII); } } else if (CalleePopAmount != 0) { // If the calling convention demands that the callee pops arguments from the // stack, we want to add it back if we have a reserved call frame. assert(CalleePopAmount < 0xffffff && "call frame too large"); emitFrameOffset(MBB, I, DL, AArch64::SP, AArch64::SP, {-(int64_t)CalleePopAmount, MVT::i8}, TII); } return MBB.erase(I); } static bool ShouldSignReturnAddress(MachineFunction &MF) { // The function should be signed in the following situations: // - sign-return-address=all // - sign-return-address=non-leaf and the functions spills the LR const Function &F = MF.getFunction(); if (!F.hasFnAttribute("sign-return-address")) return false; StringRef Scope = F.getFnAttribute("sign-return-address").getValueAsString(); if (Scope.equals("none")) return false; if (Scope.equals("all")) return true; assert(Scope.equals("non-leaf") && "Expected all, none or non-leaf"); for (const auto &Info : MF.getFrameInfo().getCalleeSavedInfo()) if (Info.getReg() == AArch64::LR) return true; return false; } void AArch64FrameLowering::emitCalleeSavedFrameMoves( MachineBasicBlock &MBB, MachineBasicBlock::iterator MBBI) const { MachineFunction &MF = *MBB.getParent(); MachineFrameInfo &MFI = MF.getFrameInfo(); const TargetSubtargetInfo &STI = MF.getSubtarget(); const MCRegisterInfo *MRI = STI.getRegisterInfo(); const TargetInstrInfo *TII = STI.getInstrInfo(); DebugLoc DL = MBB.findDebugLoc(MBBI); // Add callee saved registers to move list. const std::vector &CSI = MFI.getCalleeSavedInfo(); if (CSI.empty()) return; for (const auto &Info : CSI) { unsigned Reg = Info.getReg(); int64_t Offset = MFI.getObjectOffset(Info.getFrameIdx()) - getOffsetOfLocalArea(); unsigned DwarfReg = MRI->getDwarfRegNum(Reg, true); unsigned CFIIndex = MF.addFrameInst( MCCFIInstruction::createOffset(nullptr, DwarfReg, Offset)); BuildMI(MBB, MBBI, DL, TII->get(TargetOpcode::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex) .setMIFlags(MachineInstr::FrameSetup); } } // Find a scratch register that we can use at the start of the prologue to // re-align the stack pointer. We avoid using callee-save registers since they // may appear to be free when this is called from canUseAsPrologue (during // shrink wrapping), but then no longer be free when this is called from // emitPrologue. // // FIXME: This is a bit conservative, since in the above case we could use one // of the callee-save registers as a scratch temp to re-align the stack pointer, // but we would then have to make sure that we were in fact saving at least one // callee-save register in the prologue, which is additional complexity that // doesn't seem worth the benefit. static unsigned findScratchNonCalleeSaveRegister(MachineBasicBlock *MBB) { MachineFunction *MF = MBB->getParent(); // If MBB is an entry block, use X9 as the scratch register if (&MF->front() == MBB) return AArch64::X9; const AArch64Subtarget &Subtarget = MF->getSubtarget(); const AArch64RegisterInfo &TRI = *Subtarget.getRegisterInfo(); LivePhysRegs LiveRegs(TRI); LiveRegs.addLiveIns(*MBB); // Mark callee saved registers as used so we will not choose them. const MCPhysReg *CSRegs = MF->getRegInfo().getCalleeSavedRegs(); for (unsigned i = 0; CSRegs[i]; ++i) LiveRegs.addReg(CSRegs[i]); // Prefer X9 since it was historically used for the prologue scratch reg. const MachineRegisterInfo &MRI = MF->getRegInfo(); if (LiveRegs.available(MRI, AArch64::X9)) return AArch64::X9; for (unsigned Reg : AArch64::GPR64RegClass) { if (LiveRegs.available(MRI, Reg)) return Reg; } return AArch64::NoRegister; } bool AArch64FrameLowering::canUseAsPrologue( const MachineBasicBlock &MBB) const { const MachineFunction *MF = MBB.getParent(); MachineBasicBlock *TmpMBB = const_cast(&MBB); const AArch64Subtarget &Subtarget = MF->getSubtarget(); const AArch64RegisterInfo *RegInfo = Subtarget.getRegisterInfo(); // Don't need a scratch register if we're not going to re-align the stack. if (!RegInfo->needsStackRealignment(*MF)) return true; // Otherwise, we can use any block as long as it has a scratch register // available. return findScratchNonCalleeSaveRegister(TmpMBB) != AArch64::NoRegister; } static bool windowsRequiresStackProbe(MachineFunction &MF, unsigned StackSizeInBytes) { const AArch64Subtarget &Subtarget = MF.getSubtarget(); if (!Subtarget.isTargetWindows()) return false; const Function &F = MF.getFunction(); // TODO: When implementing stack protectors, take that into account // for the probe threshold. unsigned StackProbeSize = 4096; if (F.hasFnAttribute("stack-probe-size")) F.getFnAttribute("stack-probe-size") .getValueAsString() .getAsInteger(0, StackProbeSize); return (StackSizeInBytes >= StackProbeSize) && !F.hasFnAttribute("no-stack-arg-probe"); } bool AArch64FrameLowering::shouldCombineCSRLocalStackBump( MachineFunction &MF, unsigned StackBumpBytes) const { AArch64FunctionInfo *AFI = MF.getInfo(); const MachineFrameInfo &MFI = MF.getFrameInfo(); const AArch64Subtarget &Subtarget = MF.getSubtarget(); const AArch64RegisterInfo *RegInfo = Subtarget.getRegisterInfo(); if (MF.getFunction().hasOptSize()) return false; if (AFI->getLocalStackSize() == 0) return false; // 512 is the maximum immediate for stp/ldp that will be used for // callee-save save/restores if (StackBumpBytes >= 512 || windowsRequiresStackProbe(MF, StackBumpBytes)) return false; if (MFI.hasVarSizedObjects()) return false; if (RegInfo->needsStackRealignment(MF)) return false; // This isn't strictly necessary, but it simplifies things a bit since the // current RedZone handling code assumes the SP is adjusted by the // callee-save save/restore code. if (canUseRedZone(MF)) return false; // When there is an SVE area on the stack, always allocate the // callee-saves and spills/locals separately. if (getSVEStackSize(MF)) return false; return true; } // Given a load or a store instruction, generate an appropriate unwinding SEH // code on Windows. static MachineBasicBlock::iterator InsertSEH(MachineBasicBlock::iterator MBBI, const TargetInstrInfo &TII, MachineInstr::MIFlag Flag) { unsigned Opc = MBBI->getOpcode(); MachineBasicBlock *MBB = MBBI->getParent(); MachineFunction &MF = *MBB->getParent(); DebugLoc DL = MBBI->getDebugLoc(); unsigned ImmIdx = MBBI->getNumOperands() - 1; int Imm = MBBI->getOperand(ImmIdx).getImm(); MachineInstrBuilder MIB; const AArch64Subtarget &Subtarget = MF.getSubtarget(); const AArch64RegisterInfo *RegInfo = Subtarget.getRegisterInfo(); switch (Opc) { default: llvm_unreachable("No SEH Opcode for this instruction"); case AArch64::LDPDpost: Imm = -Imm; LLVM_FALLTHROUGH; case AArch64::STPDpre: { unsigned Reg0 = RegInfo->getSEHRegNum(MBBI->getOperand(1).getReg()); unsigned Reg1 = RegInfo->getSEHRegNum(MBBI->getOperand(2).getReg()); MIB = BuildMI(MF, DL, TII.get(AArch64::SEH_SaveFRegP_X)) .addImm(Reg0) .addImm(Reg1) .addImm(Imm * 8) .setMIFlag(Flag); break; } case AArch64::LDPXpost: Imm = -Imm; LLVM_FALLTHROUGH; case AArch64::STPXpre: { Register Reg0 = MBBI->getOperand(1).getReg(); Register Reg1 = MBBI->getOperand(2).getReg(); if (Reg0 == AArch64::FP && Reg1 == AArch64::LR) MIB = BuildMI(MF, DL, TII.get(AArch64::SEH_SaveFPLR_X)) .addImm(Imm * 8) .setMIFlag(Flag); else MIB = BuildMI(MF, DL, TII.get(AArch64::SEH_SaveRegP_X)) .addImm(RegInfo->getSEHRegNum(Reg0)) .addImm(RegInfo->getSEHRegNum(Reg1)) .addImm(Imm * 8) .setMIFlag(Flag); break; } case AArch64::LDRDpost: Imm = -Imm; LLVM_FALLTHROUGH; case AArch64::STRDpre: { unsigned Reg = RegInfo->getSEHRegNum(MBBI->getOperand(1).getReg()); MIB = BuildMI(MF, DL, TII.get(AArch64::SEH_SaveFReg_X)) .addImm(Reg) .addImm(Imm) .setMIFlag(Flag); break; } case AArch64::LDRXpost: Imm = -Imm; LLVM_FALLTHROUGH; case AArch64::STRXpre: { unsigned Reg = RegInfo->getSEHRegNum(MBBI->getOperand(1).getReg()); MIB = BuildMI(MF, DL, TII.get(AArch64::SEH_SaveReg_X)) .addImm(Reg) .addImm(Imm) .setMIFlag(Flag); break; } case AArch64::STPDi: case AArch64::LDPDi: { unsigned Reg0 = RegInfo->getSEHRegNum(MBBI->getOperand(0).getReg()); unsigned Reg1 = RegInfo->getSEHRegNum(MBBI->getOperand(1).getReg()); MIB = BuildMI(MF, DL, TII.get(AArch64::SEH_SaveFRegP)) .addImm(Reg0) .addImm(Reg1) .addImm(Imm * 8) .setMIFlag(Flag); break; } case AArch64::STPXi: case AArch64::LDPXi: { Register Reg0 = MBBI->getOperand(0).getReg(); Register Reg1 = MBBI->getOperand(1).getReg(); if (Reg0 == AArch64::FP && Reg1 == AArch64::LR) MIB = BuildMI(MF, DL, TII.get(AArch64::SEH_SaveFPLR)) .addImm(Imm * 8) .setMIFlag(Flag); else MIB = BuildMI(MF, DL, TII.get(AArch64::SEH_SaveRegP)) .addImm(RegInfo->getSEHRegNum(Reg0)) .addImm(RegInfo->getSEHRegNum(Reg1)) .addImm(Imm * 8) .setMIFlag(Flag); break; } case AArch64::STRXui: case AArch64::LDRXui: { int Reg = RegInfo->getSEHRegNum(MBBI->getOperand(0).getReg()); MIB = BuildMI(MF, DL, TII.get(AArch64::SEH_SaveReg)) .addImm(Reg) .addImm(Imm * 8) .setMIFlag(Flag); break; } case AArch64::STRDui: case AArch64::LDRDui: { unsigned Reg = RegInfo->getSEHRegNum(MBBI->getOperand(0).getReg()); MIB = BuildMI(MF, DL, TII.get(AArch64::SEH_SaveFReg)) .addImm(Reg) .addImm(Imm * 8) .setMIFlag(Flag); break; } } auto I = MBB->insertAfter(MBBI, MIB); return I; } // Fix up the SEH opcode associated with the save/restore instruction. static void fixupSEHOpcode(MachineBasicBlock::iterator MBBI, unsigned LocalStackSize) { MachineOperand *ImmOpnd = nullptr; unsigned ImmIdx = MBBI->getNumOperands() - 1; switch (MBBI->getOpcode()) { default: llvm_unreachable("Fix the offset in the SEH instruction"); case AArch64::SEH_SaveFPLR: case AArch64::SEH_SaveRegP: case AArch64::SEH_SaveReg: case AArch64::SEH_SaveFRegP: case AArch64::SEH_SaveFReg: ImmOpnd = &MBBI->getOperand(ImmIdx); break; } if (ImmOpnd) ImmOpnd->setImm(ImmOpnd->getImm() + LocalStackSize); } // Convert callee-save register save/restore instruction to do stack pointer // decrement/increment to allocate/deallocate the callee-save stack area by // converting store/load to use pre/post increment version. static MachineBasicBlock::iterator convertCalleeSaveRestoreToSPPrePostIncDec( MachineBasicBlock &MBB, MachineBasicBlock::iterator MBBI, const DebugLoc &DL, const TargetInstrInfo *TII, int CSStackSizeInc, bool NeedsWinCFI, bool *HasWinCFI, bool InProlog = true) { // Ignore instructions that do not operate on SP, i.e. shadow call stack // instructions and associated CFI instruction. while (MBBI->getOpcode() == AArch64::STRXpost || MBBI->getOpcode() == AArch64::LDRXpre || MBBI->getOpcode() == AArch64::CFI_INSTRUCTION) { if (MBBI->getOpcode() != AArch64::CFI_INSTRUCTION) assert(MBBI->getOperand(0).getReg() != AArch64::SP); ++MBBI; } unsigned NewOpc; int Scale = 1; switch (MBBI->getOpcode()) { default: llvm_unreachable("Unexpected callee-save save/restore opcode!"); case AArch64::STPXi: NewOpc = AArch64::STPXpre; Scale = 8; break; case AArch64::STPDi: NewOpc = AArch64::STPDpre; Scale = 8; break; case AArch64::STPQi: NewOpc = AArch64::STPQpre; Scale = 16; break; case AArch64::STRXui: NewOpc = AArch64::STRXpre; break; case AArch64::STRDui: NewOpc = AArch64::STRDpre; break; case AArch64::STRQui: NewOpc = AArch64::STRQpre; break; case AArch64::LDPXi: NewOpc = AArch64::LDPXpost; Scale = 8; break; case AArch64::LDPDi: NewOpc = AArch64::LDPDpost; Scale = 8; break; case AArch64::LDPQi: NewOpc = AArch64::LDPQpost; Scale = 16; break; case AArch64::LDRXui: NewOpc = AArch64::LDRXpost; break; case AArch64::LDRDui: NewOpc = AArch64::LDRDpost; break; case AArch64::LDRQui: NewOpc = AArch64::LDRQpost; break; } // Get rid of the SEH code associated with the old instruction. if (NeedsWinCFI) { auto SEH = std::next(MBBI); if (AArch64InstrInfo::isSEHInstruction(*SEH)) SEH->eraseFromParent(); } MachineInstrBuilder MIB = BuildMI(MBB, MBBI, DL, TII->get(NewOpc)); MIB.addReg(AArch64::SP, RegState::Define); // Copy all operands other than the immediate offset. unsigned OpndIdx = 0; for (unsigned OpndEnd = MBBI->getNumOperands() - 1; OpndIdx < OpndEnd; ++OpndIdx) MIB.add(MBBI->getOperand(OpndIdx)); assert(MBBI->getOperand(OpndIdx).getImm() == 0 && "Unexpected immediate offset in first/last callee-save save/restore " "instruction!"); assert(MBBI->getOperand(OpndIdx - 1).getReg() == AArch64::SP && "Unexpected base register in callee-save save/restore instruction!"); assert(CSStackSizeInc % Scale == 0); MIB.addImm(CSStackSizeInc / Scale); MIB.setMIFlags(MBBI->getFlags()); MIB.setMemRefs(MBBI->memoperands()); // Generate a new SEH code that corresponds to the new instruction. if (NeedsWinCFI) { *HasWinCFI = true; InsertSEH(*MIB, *TII, InProlog ? MachineInstr::FrameSetup : MachineInstr::FrameDestroy); } return std::prev(MBB.erase(MBBI)); } // Fixup callee-save register save/restore instructions to take into account // combined SP bump by adding the local stack size to the stack offsets. static void fixupCalleeSaveRestoreStackOffset(MachineInstr &MI, unsigned LocalStackSize, bool NeedsWinCFI, bool *HasWinCFI) { if (AArch64InstrInfo::isSEHInstruction(MI)) return; unsigned Opc = MI.getOpcode(); // Ignore instructions that do not operate on SP, i.e. shadow call stack // instructions and associated CFI instruction. if (Opc == AArch64::STRXpost || Opc == AArch64::LDRXpre || Opc == AArch64::CFI_INSTRUCTION) { if (Opc != AArch64::CFI_INSTRUCTION) assert(MI.getOperand(0).getReg() != AArch64::SP); return; } unsigned Scale; switch (Opc) { case AArch64::STPXi: case AArch64::STRXui: case AArch64::STPDi: case AArch64::STRDui: case AArch64::LDPXi: case AArch64::LDRXui: case AArch64::LDPDi: case AArch64::LDRDui: Scale = 8; break; case AArch64::STPQi: case AArch64::STRQui: case AArch64::LDPQi: case AArch64::LDRQui: Scale = 16; break; default: llvm_unreachable("Unexpected callee-save save/restore opcode!"); } unsigned OffsetIdx = MI.getNumExplicitOperands() - 1; assert(MI.getOperand(OffsetIdx - 1).getReg() == AArch64::SP && "Unexpected base register in callee-save save/restore instruction!"); // Last operand is immediate offset that needs fixing. MachineOperand &OffsetOpnd = MI.getOperand(OffsetIdx); // All generated opcodes have scaled offsets. assert(LocalStackSize % Scale == 0); OffsetOpnd.setImm(OffsetOpnd.getImm() + LocalStackSize / Scale); if (NeedsWinCFI) { *HasWinCFI = true; auto MBBI = std::next(MachineBasicBlock::iterator(MI)); assert(MBBI != MI.getParent()->end() && "Expecting a valid instruction"); assert(AArch64InstrInfo::isSEHInstruction(*MBBI) && "Expecting a SEH instruction"); fixupSEHOpcode(MBBI, LocalStackSize); } } static void adaptForLdStOpt(MachineBasicBlock &MBB, MachineBasicBlock::iterator FirstSPPopI, MachineBasicBlock::iterator LastPopI) { // Sometimes (when we restore in the same order as we save), we can end up // with code like this: // // ldp x26, x25, [sp] // ldp x24, x23, [sp, #16] // ldp x22, x21, [sp, #32] // ldp x20, x19, [sp, #48] // add sp, sp, #64 // // In this case, it is always better to put the first ldp at the end, so // that the load-store optimizer can run and merge the ldp and the add into // a post-index ldp. // If we managed to grab the first pop instruction, move it to the end. if (ReverseCSRRestoreSeq) MBB.splice(FirstSPPopI, &MBB, LastPopI); // We should end up with something like this now: // // ldp x24, x23, [sp, #16] // ldp x22, x21, [sp, #32] // ldp x20, x19, [sp, #48] // ldp x26, x25, [sp] // add sp, sp, #64 // // and the load-store optimizer can merge the last two instructions into: // // ldp x26, x25, [sp], #64 // } static bool ShouldSignWithAKey(MachineFunction &MF) { const Function &F = MF.getFunction(); if (!F.hasFnAttribute("sign-return-address-key")) return true; const StringRef Key = F.getFnAttribute("sign-return-address-key").getValueAsString(); assert(Key.equals_lower("a_key") || Key.equals_lower("b_key")); return Key.equals_lower("a_key"); } static bool needsWinCFI(const MachineFunction &MF) { const Function &F = MF.getFunction(); return MF.getTarget().getMCAsmInfo()->usesWindowsCFI() && F.needsUnwindTableEntry(); } static bool isTargetDarwin(const MachineFunction &MF) { return MF.getSubtarget().isTargetDarwin(); } void AArch64FrameLowering::emitPrologue(MachineFunction &MF, MachineBasicBlock &MBB) const { MachineBasicBlock::iterator MBBI = MBB.begin(); const MachineFrameInfo &MFI = MF.getFrameInfo(); const Function &F = MF.getFunction(); const AArch64Subtarget &Subtarget = MF.getSubtarget(); const AArch64RegisterInfo *RegInfo = Subtarget.getRegisterInfo(); const TargetInstrInfo *TII = Subtarget.getInstrInfo(); MachineModuleInfo &MMI = MF.getMMI(); AArch64FunctionInfo *AFI = MF.getInfo(); bool needsFrameMoves = (MMI.hasDebugInfo() || F.needsUnwindTableEntry()) && !MF.getTarget().getMCAsmInfo()->usesWindowsCFI(); bool HasFP = hasFP(MF); bool NeedsWinCFI = needsWinCFI(MF); bool HasWinCFI = false; auto Cleanup = make_scope_exit([&]() { MF.setHasWinCFI(HasWinCFI); }); bool IsFunclet = MBB.isEHFuncletEntry(); // At this point, we're going to decide whether or not the function uses a // redzone. In most cases, the function doesn't have a redzone so let's // assume that's false and set it to true in the case that there's a redzone. AFI->setHasRedZone(false); // Debug location must be unknown since the first debug location is used // to determine the end of the prologue. DebugLoc DL; if (ShouldSignReturnAddress(MF)) { if (ShouldSignWithAKey(MF)) BuildMI(MBB, MBBI, DL, TII->get(AArch64::PACIASP)) .setMIFlag(MachineInstr::FrameSetup); else { BuildMI(MBB, MBBI, DL, TII->get(AArch64::EMITBKEY)) .setMIFlag(MachineInstr::FrameSetup); BuildMI(MBB, MBBI, DL, TII->get(AArch64::PACIBSP)) .setMIFlag(MachineInstr::FrameSetup); } unsigned CFIIndex = MF.addFrameInst(MCCFIInstruction::createNegateRAState(nullptr)); BuildMI(MBB, MBBI, DL, TII->get(TargetOpcode::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex) .setMIFlags(MachineInstr::FrameSetup); } // All calls are tail calls in GHC calling conv, and functions have no // prologue/epilogue. if (MF.getFunction().getCallingConv() == CallingConv::GHC) return; // Set tagged base pointer to the bottom of the stack frame. // Ideally it should match SP value after prologue. AFI->setTaggedBasePointerOffset(MFI.getStackSize()); const StackOffset &SVEStackSize = getSVEStackSize(MF); // getStackSize() includes all the locals in its size calculation. We don't // include these locals when computing the stack size of a funclet, as they // are allocated in the parent's stack frame and accessed via the frame // pointer from the funclet. We only save the callee saved registers in the // funclet, which are really the callee saved registers of the parent // function, including the funclet. int NumBytes = IsFunclet ? (int)getWinEHFuncletFrameSize(MF) : (int)MFI.getStackSize(); if (!AFI->hasStackFrame() && !windowsRequiresStackProbe(MF, NumBytes)) { assert(!HasFP && "unexpected function without stack frame but with FP"); assert(!SVEStackSize && "unexpected function without stack frame but with SVE objects"); // All of the stack allocation is for locals. AFI->setLocalStackSize(NumBytes); if (!NumBytes) return; // REDZONE: If the stack size is less than 128 bytes, we don't need // to actually allocate. if (canUseRedZone(MF)) { AFI->setHasRedZone(true); ++NumRedZoneFunctions; } else { emitFrameOffset(MBB, MBBI, DL, AArch64::SP, AArch64::SP, {-NumBytes, MVT::i8}, TII, MachineInstr::FrameSetup, false, NeedsWinCFI, &HasWinCFI); if (!NeedsWinCFI) { // Label used to tie together the PROLOG_LABEL and the MachineMoves. MCSymbol *FrameLabel = MMI.getContext().createTempSymbol(); // Encode the stack size of the leaf function. unsigned CFIIndex = MF.addFrameInst( MCCFIInstruction::createDefCfaOffset(FrameLabel, -NumBytes)); BuildMI(MBB, MBBI, DL, TII->get(TargetOpcode::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex) .setMIFlags(MachineInstr::FrameSetup); } } if (NeedsWinCFI) { HasWinCFI = true; BuildMI(MBB, MBBI, DL, TII->get(AArch64::SEH_PrologEnd)) .setMIFlag(MachineInstr::FrameSetup); } return; } bool IsWin64 = Subtarget.isCallingConvWin64(MF.getFunction().getCallingConv()); // Var args are accounted for in the containing function, so don't // include them for funclets. unsigned FixedObject = (IsWin64 && !IsFunclet) ? alignTo(AFI->getVarArgsGPRSize(), 16) : 0; auto PrologueSaveSize = AFI->getCalleeSavedStackSize() + FixedObject; // All of the remaining stack allocations are for locals. AFI->setLocalStackSize(NumBytes - PrologueSaveSize); bool CombineSPBump = shouldCombineCSRLocalStackBump(MF, NumBytes); if (CombineSPBump) { assert(!SVEStackSize && "Cannot combine SP bump with SVE"); emitFrameOffset(MBB, MBBI, DL, AArch64::SP, AArch64::SP, {-NumBytes, MVT::i8}, TII, MachineInstr::FrameSetup, false, NeedsWinCFI, &HasWinCFI); NumBytes = 0; } else if (PrologueSaveSize != 0) { MBBI = convertCalleeSaveRestoreToSPPrePostIncDec( MBB, MBBI, DL, TII, -PrologueSaveSize, NeedsWinCFI, &HasWinCFI); NumBytes -= PrologueSaveSize; } assert(NumBytes >= 0 && "Negative stack allocation size!?"); // Move past the saves of the callee-saved registers, fixing up the offsets // and pre-inc if we decided to combine the callee-save and local stack // pointer bump above. MachineBasicBlock::iterator End = MBB.end(); while (MBBI != End && MBBI->getFlag(MachineInstr::FrameSetup)) { if (CombineSPBump) fixupCalleeSaveRestoreStackOffset(*MBBI, AFI->getLocalStackSize(), NeedsWinCFI, &HasWinCFI); ++MBBI; } // The code below is not applicable to funclets. We have emitted all the SEH // opcodes that we needed to emit. The FP and BP belong to the containing // function. if (IsFunclet) { if (NeedsWinCFI) { HasWinCFI = true; BuildMI(MBB, MBBI, DL, TII->get(AArch64::SEH_PrologEnd)) .setMIFlag(MachineInstr::FrameSetup); } // SEH funclets are passed the frame pointer in X1. If the parent // function uses the base register, then the base register is used // directly, and is not retrieved from X1. if (F.hasPersonalityFn()) { EHPersonality Per = classifyEHPersonality(F.getPersonalityFn()); if (isAsynchronousEHPersonality(Per)) { BuildMI(MBB, MBBI, DL, TII->get(TargetOpcode::COPY), AArch64::FP) .addReg(AArch64::X1).setMIFlag(MachineInstr::FrameSetup); MBB.addLiveIn(AArch64::X1); } } return; } if (HasFP) { // Only set up FP if we actually need to. int FPOffset = isTargetDarwin(MF) ? (AFI->getCalleeSavedStackSize() - 16) : 0; if (CombineSPBump) FPOffset += AFI->getLocalStackSize(); // Issue sub fp, sp, FPOffset or // mov fp,sp when FPOffset is zero. // Note: All stores of callee-saved registers are marked as "FrameSetup". // This code marks the instruction(s) that set the FP also. emitFrameOffset(MBB, MBBI, DL, AArch64::FP, AArch64::SP, {FPOffset, MVT::i8}, TII, MachineInstr::FrameSetup, false, NeedsWinCFI, &HasWinCFI); } if (windowsRequiresStackProbe(MF, NumBytes)) { uint32_t NumWords = NumBytes >> 4; if (NeedsWinCFI) { HasWinCFI = true; // alloc_l can hold at most 256MB, so assume that NumBytes doesn't // exceed this amount. We need to move at most 2^24 - 1 into x15. // This is at most two instructions, MOVZ follwed by MOVK. // TODO: Fix to use multiple stack alloc unwind codes for stacks // exceeding 256MB in size. if (NumBytes >= (1 << 28)) report_fatal_error("Stack size cannot exceed 256MB for stack " "unwinding purposes"); uint32_t LowNumWords = NumWords & 0xFFFF; BuildMI(MBB, MBBI, DL, TII->get(AArch64::MOVZXi), AArch64::X15) .addImm(LowNumWords) .addImm(AArch64_AM::getShifterImm(AArch64_AM::LSL, 0)) .setMIFlag(MachineInstr::FrameSetup); BuildMI(MBB, MBBI, DL, TII->get(AArch64::SEH_Nop)) .setMIFlag(MachineInstr::FrameSetup); if ((NumWords & 0xFFFF0000) != 0) { BuildMI(MBB, MBBI, DL, TII->get(AArch64::MOVKXi), AArch64::X15) .addReg(AArch64::X15) .addImm((NumWords & 0xFFFF0000) >> 16) // High half .addImm(AArch64_AM::getShifterImm(AArch64_AM::LSL, 16)) .setMIFlag(MachineInstr::FrameSetup); BuildMI(MBB, MBBI, DL, TII->get(AArch64::SEH_Nop)) .setMIFlag(MachineInstr::FrameSetup); } } else { BuildMI(MBB, MBBI, DL, TII->get(AArch64::MOVi64imm), AArch64::X15) .addImm(NumWords) .setMIFlags(MachineInstr::FrameSetup); } switch (MF.getTarget().getCodeModel()) { case CodeModel::Tiny: case CodeModel::Small: case CodeModel::Medium: case CodeModel::Kernel: BuildMI(MBB, MBBI, DL, TII->get(AArch64::BL)) .addExternalSymbol("__chkstk") .addReg(AArch64::X15, RegState::Implicit) .addReg(AArch64::X16, RegState::Implicit | RegState::Define | RegState::Dead) .addReg(AArch64::X17, RegState::Implicit | RegState::Define | RegState::Dead) .addReg(AArch64::NZCV, RegState::Implicit | RegState::Define | RegState::Dead) .setMIFlags(MachineInstr::FrameSetup); if (NeedsWinCFI) { HasWinCFI = true; BuildMI(MBB, MBBI, DL, TII->get(AArch64::SEH_Nop)) .setMIFlag(MachineInstr::FrameSetup); } break; case CodeModel::Large: BuildMI(MBB, MBBI, DL, TII->get(AArch64::MOVaddrEXT)) .addReg(AArch64::X16, RegState::Define) .addExternalSymbol("__chkstk") .addExternalSymbol("__chkstk") .setMIFlags(MachineInstr::FrameSetup); if (NeedsWinCFI) { HasWinCFI = true; BuildMI(MBB, MBBI, DL, TII->get(AArch64::SEH_Nop)) .setMIFlag(MachineInstr::FrameSetup); } BuildMI(MBB, MBBI, DL, TII->get(AArch64::BLR)) .addReg(AArch64::X16, RegState::Kill) .addReg(AArch64::X15, RegState::Implicit | RegState::Define) .addReg(AArch64::X16, RegState::Implicit | RegState::Define | RegState::Dead) .addReg(AArch64::X17, RegState::Implicit | RegState::Define | RegState::Dead) .addReg(AArch64::NZCV, RegState::Implicit | RegState::Define | RegState::Dead) .setMIFlags(MachineInstr::FrameSetup); if (NeedsWinCFI) { HasWinCFI = true; BuildMI(MBB, MBBI, DL, TII->get(AArch64::SEH_Nop)) .setMIFlag(MachineInstr::FrameSetup); } break; } BuildMI(MBB, MBBI, DL, TII->get(AArch64::SUBXrx64), AArch64::SP) .addReg(AArch64::SP, RegState::Kill) .addReg(AArch64::X15, RegState::Kill) .addImm(AArch64_AM::getArithExtendImm(AArch64_AM::UXTX, 4)) .setMIFlags(MachineInstr::FrameSetup); if (NeedsWinCFI) { HasWinCFI = true; BuildMI(MBB, MBBI, DL, TII->get(AArch64::SEH_StackAlloc)) .addImm(NumBytes) .setMIFlag(MachineInstr::FrameSetup); } NumBytes = 0; } emitFrameOffset(MBB, MBBI, DL, AArch64::SP, AArch64::SP, -SVEStackSize, TII, MachineInstr::FrameSetup); // Allocate space for the rest of the frame. if (NumBytes) { const bool NeedsRealignment = RegInfo->needsStackRealignment(MF); unsigned scratchSPReg = AArch64::SP; if (NeedsRealignment) { scratchSPReg = findScratchNonCalleeSaveRegister(&MBB); assert(scratchSPReg != AArch64::NoRegister); } // If we're a leaf function, try using the red zone. if (!canUseRedZone(MF)) // FIXME: in the case of dynamic re-alignment, NumBytes doesn't have // the correct value here, as NumBytes also includes padding bytes, // which shouldn't be counted here. emitFrameOffset(MBB, MBBI, DL, scratchSPReg, AArch64::SP, {-NumBytes, MVT::i8}, TII, MachineInstr::FrameSetup, false, NeedsWinCFI, &HasWinCFI); if (NeedsRealignment) { const unsigned Alignment = MFI.getMaxAlignment(); const unsigned NrBitsToZero = countTrailingZeros(Alignment); assert(NrBitsToZero > 1); assert(scratchSPReg != AArch64::SP); // SUB X9, SP, NumBytes // -- X9 is temporary register, so shouldn't contain any live data here, // -- free to use. This is already produced by emitFrameOffset above. // AND SP, X9, 0b11111...0000 // The logical immediates have a non-trivial encoding. The following // formula computes the encoded immediate with all ones but // NrBitsToZero zero bits as least significant bits. uint32_t andMaskEncoded = (1 << 12) // = N | ((64 - NrBitsToZero) << 6) // immr | ((64 - NrBitsToZero - 1) << 0); // imms BuildMI(MBB, MBBI, DL, TII->get(AArch64::ANDXri), AArch64::SP) .addReg(scratchSPReg, RegState::Kill) .addImm(andMaskEncoded); AFI->setStackRealigned(true); if (NeedsWinCFI) { HasWinCFI = true; BuildMI(MBB, MBBI, DL, TII->get(AArch64::SEH_StackAlloc)) .addImm(NumBytes & andMaskEncoded) .setMIFlag(MachineInstr::FrameSetup); } } } // If we need a base pointer, set it up here. It's whatever the value of the // stack pointer is at this point. Any variable size objects will be allocated // after this, so we can still use the base pointer to reference locals. // // FIXME: Clarify FrameSetup flags here. // Note: Use emitFrameOffset() like above for FP if the FrameSetup flag is // needed. if (RegInfo->hasBasePointer(MF)) { TII->copyPhysReg(MBB, MBBI, DL, RegInfo->getBaseRegister(), AArch64::SP, false); if (NeedsWinCFI) { HasWinCFI = true; BuildMI(MBB, MBBI, DL, TII->get(AArch64::SEH_Nop)) .setMIFlag(MachineInstr::FrameSetup); } } // The very last FrameSetup instruction indicates the end of prologue. Emit a // SEH opcode indicating the prologue end. if (NeedsWinCFI && HasWinCFI) { BuildMI(MBB, MBBI, DL, TII->get(AArch64::SEH_PrologEnd)) .setMIFlag(MachineInstr::FrameSetup); } if (needsFrameMoves) { const DataLayout &TD = MF.getDataLayout(); const int StackGrowth = isTargetDarwin(MF) ? (2 * -TD.getPointerSize(0)) : -AFI->getCalleeSavedStackSize(); Register FramePtr = RegInfo->getFrameRegister(MF); // An example of the prologue: // // .globl __foo // .align 2 // __foo: // Ltmp0: // .cfi_startproc // .cfi_personality 155, ___gxx_personality_v0 // Leh_func_begin: // .cfi_lsda 16, Lexception33 // // stp xa,bx, [sp, -#offset]! // ... // stp x28, x27, [sp, #offset-32] // stp fp, lr, [sp, #offset-16] // add fp, sp, #offset - 16 // sub sp, sp, #1360 // // The Stack: // +-------------------------------------------+ // 10000 | ........ | ........ | ........ | ........ | // 10004 | ........ | ........ | ........ | ........ | // +-------------------------------------------+ // 10008 | ........ | ........ | ........ | ........ | // 1000c | ........ | ........ | ........ | ........ | // +===========================================+ // 10010 | X28 Register | // 10014 | X28 Register | // +-------------------------------------------+ // 10018 | X27 Register | // 1001c | X27 Register | // +===========================================+ // 10020 | Frame Pointer | // 10024 | Frame Pointer | // +-------------------------------------------+ // 10028 | Link Register | // 1002c | Link Register | // +===========================================+ // 10030 | ........ | ........ | ........ | ........ | // 10034 | ........ | ........ | ........ | ........ | // +-------------------------------------------+ // 10038 | ........ | ........ | ........ | ........ | // 1003c | ........ | ........ | ........ | ........ | // +-------------------------------------------+ // // [sp] = 10030 :: >>initial value<< // sp = 10020 :: stp fp, lr, [sp, #-16]! // fp = sp == 10020 :: mov fp, sp // [sp] == 10020 :: stp x28, x27, [sp, #-16]! // sp == 10010 :: >>final value<< // // The frame pointer (w29) points to address 10020. If we use an offset of // '16' from 'w29', we get the CFI offsets of -8 for w30, -16 for w29, -24 // for w27, and -32 for w28: // // Ltmp1: // .cfi_def_cfa w29, 16 // Ltmp2: // .cfi_offset w30, -8 // Ltmp3: // .cfi_offset w29, -16 // Ltmp4: // .cfi_offset w27, -24 // Ltmp5: // .cfi_offset w28, -32 if (HasFP) { // Define the current CFA rule to use the provided FP. unsigned Reg = RegInfo->getDwarfRegNum(FramePtr, true); unsigned CFIIndex = MF.addFrameInst(MCCFIInstruction::createDefCfa( nullptr, Reg, StackGrowth - FixedObject)); BuildMI(MBB, MBBI, DL, TII->get(TargetOpcode::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex) .setMIFlags(MachineInstr::FrameSetup); } else { // Encode the stack size of the leaf function. unsigned CFIIndex = MF.addFrameInst( MCCFIInstruction::createDefCfaOffset(nullptr, -MFI.getStackSize())); BuildMI(MBB, MBBI, DL, TII->get(TargetOpcode::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex) .setMIFlags(MachineInstr::FrameSetup); } // Now emit the moves for whatever callee saved regs we have (including FP, // LR if those are saved). emitCalleeSavedFrameMoves(MBB, MBBI); } } static void InsertReturnAddressAuth(MachineFunction &MF, MachineBasicBlock &MBB) { if (!ShouldSignReturnAddress(MF)) return; const AArch64Subtarget &Subtarget = MF.getSubtarget(); const TargetInstrInfo *TII = Subtarget.getInstrInfo(); MachineBasicBlock::iterator MBBI = MBB.getFirstTerminator(); DebugLoc DL; if (MBBI != MBB.end()) DL = MBBI->getDebugLoc(); // The AUTIASP instruction assembles to a hint instruction before v8.3a so // this instruction can safely used for any v8a architecture. // From v8.3a onwards there are optimised authenticate LR and return // instructions, namely RETA{A,B}, that can be used instead. if (Subtarget.hasV8_3aOps() && MBBI != MBB.end() && MBBI->getOpcode() == AArch64::RET_ReallyLR) { BuildMI(MBB, MBBI, DL, TII->get(ShouldSignWithAKey(MF) ? AArch64::RETAA : AArch64::RETAB)) .copyImplicitOps(*MBBI); MBB.erase(MBBI); } else { BuildMI( MBB, MBBI, DL, TII->get(ShouldSignWithAKey(MF) ? AArch64::AUTIASP : AArch64::AUTIBSP)) .setMIFlag(MachineInstr::FrameDestroy); } } static bool isFuncletReturnInstr(const MachineInstr &MI) { switch (MI.getOpcode()) { default: return false; case AArch64::CATCHRET: case AArch64::CLEANUPRET: return true; } } void AArch64FrameLowering::emitEpilogue(MachineFunction &MF, MachineBasicBlock &MBB) const { MachineBasicBlock::iterator MBBI = MBB.getLastNonDebugInstr(); MachineFrameInfo &MFI = MF.getFrameInfo(); const AArch64Subtarget &Subtarget = MF.getSubtarget(); const TargetInstrInfo *TII = Subtarget.getInstrInfo(); DebugLoc DL; bool IsTailCallReturn = false; bool NeedsWinCFI = needsWinCFI(MF); bool HasWinCFI = false; bool IsFunclet = false; auto WinCFI = make_scope_exit([&]() { if (!MF.hasWinCFI()) MF.setHasWinCFI(HasWinCFI); }); if (MBB.end() != MBBI) { DL = MBBI->getDebugLoc(); unsigned RetOpcode = MBBI->getOpcode(); IsTailCallReturn = RetOpcode == AArch64::TCRETURNdi || RetOpcode == AArch64::TCRETURNri || RetOpcode == AArch64::TCRETURNriBTI; IsFunclet = isFuncletReturnInstr(*MBBI); } int NumBytes = IsFunclet ? (int)getWinEHFuncletFrameSize(MF) : MFI.getStackSize(); AArch64FunctionInfo *AFI = MF.getInfo(); // All calls are tail calls in GHC calling conv, and functions have no // prologue/epilogue. if (MF.getFunction().getCallingConv() == CallingConv::GHC) return; // Initial and residual are named for consistency with the prologue. Note that // in the epilogue, the residual adjustment is executed first. uint64_t ArgumentPopSize = 0; if (IsTailCallReturn) { MachineOperand &StackAdjust = MBBI->getOperand(1); // For a tail-call in a callee-pops-arguments environment, some or all of // the stack may actually be in use for the call's arguments, this is // calculated during LowerCall and consumed here... ArgumentPopSize = StackAdjust.getImm(); } else { // ... otherwise the amount to pop is *all* of the argument space, // conveniently stored in the MachineFunctionInfo by // LowerFormalArguments. This will, of course, be zero for the C calling // convention. ArgumentPopSize = AFI->getArgumentStackToRestore(); } // The stack frame should be like below, // // ---------------------- --- // | | | // | BytesInStackArgArea| CalleeArgStackSize // | (NumReusableBytes) | (of tail call) // | | --- // | | | // ---------------------| --- | // | | | | // | CalleeSavedReg | | | // | (CalleeSavedStackSize)| | | // | | | | // ---------------------| | NumBytes // | | StackSize (StackAdjustUp) // | LocalStackSize | | | // | (covering callee | | | // | args) | | | // | | | | // ---------------------- --- --- // // So NumBytes = StackSize + BytesInStackArgArea - CalleeArgStackSize // = StackSize + ArgumentPopSize // // AArch64TargetLowering::LowerCall figures out ArgumentPopSize and keeps // it as the 2nd argument of AArch64ISD::TC_RETURN. auto Cleanup = make_scope_exit([&] { InsertReturnAddressAuth(MF, MBB); }); bool IsWin64 = Subtarget.isCallingConvWin64(MF.getFunction().getCallingConv()); // Var args are accounted for in the containing function, so don't // include them for funclets. unsigned FixedObject = (IsWin64 && !IsFunclet) ? alignTo(AFI->getVarArgsGPRSize(), 16) : 0; uint64_t AfterCSRPopSize = ArgumentPopSize; auto PrologueSaveSize = AFI->getCalleeSavedStackSize() + FixedObject; // We cannot rely on the local stack size set in emitPrologue if the function // has funclets, as funclets have different local stack size requirements, and // the current value set in emitPrologue may be that of the containing // function. if (MF.hasEHFunclets()) AFI->setLocalStackSize(NumBytes - PrologueSaveSize); bool CombineSPBump = shouldCombineCSRLocalStackBump(MF, NumBytes); // Assume we can't combine the last pop with the sp restore. if (!CombineSPBump && PrologueSaveSize != 0) { MachineBasicBlock::iterator Pop = std::prev(MBB.getFirstTerminator()); while (AArch64InstrInfo::isSEHInstruction(*Pop)) Pop = std::prev(Pop); // Converting the last ldp to a post-index ldp is valid only if the last // ldp's offset is 0. const MachineOperand &OffsetOp = Pop->getOperand(Pop->getNumOperands() - 1); // If the offset is 0, convert it to a post-index ldp. if (OffsetOp.getImm() == 0) convertCalleeSaveRestoreToSPPrePostIncDec( MBB, Pop, DL, TII, PrologueSaveSize, NeedsWinCFI, &HasWinCFI, false); else { // If not, make sure to emit an add after the last ldp. // We're doing this by transfering the size to be restored from the // adjustment *before* the CSR pops to the adjustment *after* the CSR // pops. AfterCSRPopSize += PrologueSaveSize; } } // Move past the restores of the callee-saved registers. // If we plan on combining the sp bump of the local stack size and the callee // save stack size, we might need to adjust the CSR save and restore offsets. MachineBasicBlock::iterator LastPopI = MBB.getFirstTerminator(); MachineBasicBlock::iterator Begin = MBB.begin(); while (LastPopI != Begin) { --LastPopI; if (!LastPopI->getFlag(MachineInstr::FrameDestroy)) { ++LastPopI; break; } else if (CombineSPBump) fixupCalleeSaveRestoreStackOffset(*LastPopI, AFI->getLocalStackSize(), NeedsWinCFI, &HasWinCFI); } if (NeedsWinCFI) { HasWinCFI = true; BuildMI(MBB, LastPopI, DL, TII->get(AArch64::SEH_EpilogStart)) .setMIFlag(MachineInstr::FrameDestroy); } const StackOffset &SVEStackSize = getSVEStackSize(MF); // If there is a single SP update, insert it before the ret and we're done. if (CombineSPBump) { assert(!SVEStackSize && "Cannot combine SP bump with SVE"); emitFrameOffset(MBB, MBB.getFirstTerminator(), DL, AArch64::SP, AArch64::SP, {NumBytes + (int64_t)AfterCSRPopSize, MVT::i8}, TII, MachineInstr::FrameDestroy, false, NeedsWinCFI, &HasWinCFI); if (NeedsWinCFI && HasWinCFI) BuildMI(MBB, MBB.getFirstTerminator(), DL, TII->get(AArch64::SEH_EpilogEnd)) .setMIFlag(MachineInstr::FrameDestroy); return; } NumBytes -= PrologueSaveSize; assert(NumBytes >= 0 && "Negative stack allocation size!?"); // Deallocate the SVE area. if (SVEStackSize) if (!AFI->isStackRealigned()) emitFrameOffset(MBB, LastPopI, DL, AArch64::SP, AArch64::SP, SVEStackSize, TII, MachineInstr::FrameDestroy); if (!hasFP(MF)) { bool RedZone = canUseRedZone(MF); // If this was a redzone leaf function, we don't need to restore the // stack pointer (but we may need to pop stack args for fastcc). if (RedZone && AfterCSRPopSize == 0) return; bool NoCalleeSaveRestore = PrologueSaveSize == 0; int StackRestoreBytes = RedZone ? 0 : NumBytes; if (NoCalleeSaveRestore) StackRestoreBytes += AfterCSRPopSize; // If we were able to combine the local stack pop with the argument pop, // then we're done. bool Done = NoCalleeSaveRestore || AfterCSRPopSize == 0; // If we're done after this, make sure to help the load store optimizer. if (Done) adaptForLdStOpt(MBB, MBB.getFirstTerminator(), LastPopI); emitFrameOffset(MBB, LastPopI, DL, AArch64::SP, AArch64::SP, {StackRestoreBytes, MVT::i8}, TII, MachineInstr::FrameDestroy, false, NeedsWinCFI, &HasWinCFI); if (Done) { if (NeedsWinCFI) { HasWinCFI = true; BuildMI(MBB, MBB.getFirstTerminator(), DL, TII->get(AArch64::SEH_EpilogEnd)) .setMIFlag(MachineInstr::FrameDestroy); } return; } NumBytes = 0; } // Restore the original stack pointer. // FIXME: Rather than doing the math here, we should instead just use // non-post-indexed loads for the restores if we aren't actually going to // be able to save any instructions. if (!IsFunclet && (MFI.hasVarSizedObjects() || AFI->isStackRealigned())) { int64_t OffsetToFrameRecord = isTargetDarwin(MF) ? (-(int64_t)AFI->getCalleeSavedStackSize() + 16) : 0; emitFrameOffset(MBB, LastPopI, DL, AArch64::SP, AArch64::FP, {OffsetToFrameRecord, MVT::i8}, TII, MachineInstr::FrameDestroy, false, NeedsWinCFI); } else if (NumBytes) emitFrameOffset(MBB, LastPopI, DL, AArch64::SP, AArch64::SP, {NumBytes, MVT::i8}, TII, MachineInstr::FrameDestroy, false, NeedsWinCFI); // This must be placed after the callee-save restore code because that code // assumes the SP is at the same location as it was after the callee-save save // code in the prologue. if (AfterCSRPopSize) { // Find an insertion point for the first ldp so that it goes before the // shadow call stack epilog instruction. This ensures that the restore of // lr from x18 is placed after the restore from sp. auto FirstSPPopI = MBB.getFirstTerminator(); while (FirstSPPopI != Begin) { auto Prev = std::prev(FirstSPPopI); if (Prev->getOpcode() != AArch64::LDRXpre || Prev->getOperand(0).getReg() == AArch64::SP) break; FirstSPPopI = Prev; } adaptForLdStOpt(MBB, FirstSPPopI, LastPopI); emitFrameOffset(MBB, FirstSPPopI, DL, AArch64::SP, AArch64::SP, {(int64_t)AfterCSRPopSize, MVT::i8}, TII, MachineInstr::FrameDestroy, false, NeedsWinCFI, &HasWinCFI); } if (NeedsWinCFI && HasWinCFI) BuildMI(MBB, MBB.getFirstTerminator(), DL, TII->get(AArch64::SEH_EpilogEnd)) .setMIFlag(MachineInstr::FrameDestroy); MF.setHasWinCFI(HasWinCFI); } /// getFrameIndexReference - Provide a base+offset reference to an FI slot for /// debug info. It's the same as what we use for resolving the code-gen /// references for now. FIXME: This can go wrong when references are /// SP-relative and simple call frames aren't used. int AArch64FrameLowering::getFrameIndexReference(const MachineFunction &MF, int FI, unsigned &FrameReg) const { return resolveFrameIndexReference( MF, FI, FrameReg, /*PreferFP=*/ MF.getFunction().hasFnAttribute(Attribute::SanitizeHWAddress), /*ForSimm=*/false) .getBytes(); } int AArch64FrameLowering::getNonLocalFrameIndexReference( const MachineFunction &MF, int FI) const { return getSEHFrameIndexOffset(MF, FI); } static StackOffset getFPOffset(const MachineFunction &MF, int ObjectOffset) { const auto *AFI = MF.getInfo(); const auto &Subtarget = MF.getSubtarget(); bool IsWin64 = Subtarget.isCallingConvWin64(MF.getFunction().getCallingConv()); unsigned FixedObject = IsWin64 ? alignTo(AFI->getVarArgsGPRSize(), 16) : 0; unsigned FPAdjust = isTargetDarwin(MF) ? 16 : AFI->getCalleeSavedStackSize(); return {ObjectOffset + FixedObject + FPAdjust, MVT::i8}; } static StackOffset getStackOffset(const MachineFunction &MF, int ObjectOffset) { const auto &MFI = MF.getFrameInfo(); return {ObjectOffset + (int)MFI.getStackSize(), MVT::i8}; } int AArch64FrameLowering::getSEHFrameIndexOffset(const MachineFunction &MF, int FI) const { const auto *RegInfo = static_cast( MF.getSubtarget().getRegisterInfo()); int ObjectOffset = MF.getFrameInfo().getObjectOffset(FI); return RegInfo->getLocalAddressRegister(MF) == AArch64::FP ? getFPOffset(MF, ObjectOffset).getBytes() : getStackOffset(MF, ObjectOffset).getBytes(); } StackOffset AArch64FrameLowering::resolveFrameIndexReference( const MachineFunction &MF, int FI, unsigned &FrameReg, bool PreferFP, bool ForSimm) const { const auto &MFI = MF.getFrameInfo(); int ObjectOffset = MFI.getObjectOffset(FI); bool isFixed = MFI.isFixedObjectIndex(FI); bool isSVE = MFI.getStackID(FI) == TargetStackID::SVEVector; return resolveFrameOffsetReference(MF, ObjectOffset, isFixed, isSVE, FrameReg, PreferFP, ForSimm); } StackOffset AArch64FrameLowering::resolveFrameOffsetReference( const MachineFunction &MF, int ObjectOffset, bool isFixed, bool isSVE, unsigned &FrameReg, bool PreferFP, bool ForSimm) const { const auto &MFI = MF.getFrameInfo(); const auto *RegInfo = static_cast( MF.getSubtarget().getRegisterInfo()); const auto *AFI = MF.getInfo(); const auto &Subtarget = MF.getSubtarget(); int FPOffset = getFPOffset(MF, ObjectOffset).getBytes(); int Offset = getStackOffset(MF, ObjectOffset).getBytes(); bool isCSR = !isFixed && ObjectOffset >= -((int)AFI->getCalleeSavedStackSize()); const StackOffset &SVEStackSize = getSVEStackSize(MF); // Use frame pointer to reference fixed objects. Use it for locals if // there are VLAs or a dynamically realigned SP (and thus the SP isn't // reliable as a base). Make sure useFPForScavengingIndex() does the // right thing for the emergency spill slot. bool UseFP = false; if (AFI->hasStackFrame() && !isSVE) { // We shouldn't prefer using the FP when there is an SVE area // in between the FP and the non-SVE locals/spills. PreferFP &= !SVEStackSize; // Note: Keeping the following as multiple 'if' statements rather than // merging to a single expression for readability. // // Argument access should always use the FP. if (isFixed) { UseFP = hasFP(MF); } else if (isCSR && RegInfo->needsStackRealignment(MF)) { // References to the CSR area must use FP if we're re-aligning the stack // since the dynamically-sized alignment padding is between the SP/BP and // the CSR area. assert(hasFP(MF) && "Re-aligned stack must have frame pointer"); UseFP = true; } else if (hasFP(MF) && !RegInfo->needsStackRealignment(MF)) { // If the FPOffset is negative and we're producing a signed immediate, we // have to keep in mind that the available offset range for negative // offsets is smaller than for positive ones. If an offset is available // via the FP and the SP, use whichever is closest. bool FPOffsetFits = !ForSimm || FPOffset >= -256; PreferFP |= Offset > -FPOffset; if (MFI.hasVarSizedObjects()) { // If we have variable sized objects, we can use either FP or BP, as the // SP offset is unknown. We can use the base pointer if we have one and // FP is not preferred. If not, we're stuck with using FP. bool CanUseBP = RegInfo->hasBasePointer(MF); if (FPOffsetFits && CanUseBP) // Both are ok. Pick the best. UseFP = PreferFP; else if (!CanUseBP) { // Can't use BP. Forced to use FP. assert(!SVEStackSize && "Expected BP to be available"); UseFP = true; } // else we can use BP and FP, but the offset from FP won't fit. // That will make us scavenge registers which we can probably avoid by // using BP. If it won't fit for BP either, we'll scavenge anyway. } else if (FPOffset >= 0) { // Use SP or FP, whichever gives us the best chance of the offset // being in range for direct access. If the FPOffset is positive, // that'll always be best, as the SP will be even further away. UseFP = true; } else if (MF.hasEHFunclets() && !RegInfo->hasBasePointer(MF)) { // Funclets access the locals contained in the parent's stack frame // via the frame pointer, so we have to use the FP in the parent // function. (void) Subtarget; assert( Subtarget.isCallingConvWin64(MF.getFunction().getCallingConv()) && "Funclets should only be present on Win64"); UseFP = true; } else { // We have the choice between FP and (SP or BP). if (FPOffsetFits && PreferFP) // If FP is the best fit, use it. UseFP = true; } } } assert(((isFixed || isCSR) || !RegInfo->needsStackRealignment(MF) || !UseFP) && "In the presence of dynamic stack pointer realignment, " "non-argument/CSR objects cannot be accessed through the frame pointer"); if (isSVE) { int64_t OffsetToSVEArea = MFI.getStackSize() - AFI->getCalleeSavedStackSize(); StackOffset FPOffset = {ObjectOffset, MVT::nxv1i8}; StackOffset SPOffset = SVEStackSize + StackOffset(ObjectOffset, MVT::nxv1i8) + StackOffset(OffsetToSVEArea, MVT::i8); // Always use the FP for SVE spills if available and beneficial. if (hasFP(MF) && (SPOffset.getBytes() || FPOffset.getScalableBytes() < SPOffset.getScalableBytes() || RegInfo->needsStackRealignment(MF))) { FrameReg = RegInfo->getFrameRegister(MF); return FPOffset; } FrameReg = RegInfo->hasBasePointer(MF) ? RegInfo->getBaseRegister() : (unsigned)AArch64::SP; return SPOffset; } StackOffset ScalableOffset = {}; if (UseFP && !(isFixed || isCSR)) ScalableOffset = -SVEStackSize; if (!UseFP && (isFixed || isCSR)) ScalableOffset = SVEStackSize; if (UseFP) { FrameReg = RegInfo->getFrameRegister(MF); return StackOffset(FPOffset, MVT::i8) + ScalableOffset; } // Use the base pointer if we have one. if (RegInfo->hasBasePointer(MF)) FrameReg = RegInfo->getBaseRegister(); else { assert(!MFI.hasVarSizedObjects() && "Can't use SP when we have var sized objects."); FrameReg = AArch64::SP; // If we're using the red zone for this function, the SP won't actually // be adjusted, so the offsets will be negative. They're also all // within range of the signed 9-bit immediate instructions. if (canUseRedZone(MF)) Offset -= AFI->getLocalStackSize(); } return StackOffset(Offset, MVT::i8) + ScalableOffset; } static unsigned getPrologueDeath(MachineFunction &MF, unsigned Reg) { // Do not set a kill flag on values that are also marked as live-in. This // happens with the @llvm-returnaddress intrinsic and with arguments passed in // callee saved registers. // Omitting the kill flags is conservatively correct even if the live-in // is not used after all. bool IsLiveIn = MF.getRegInfo().isLiveIn(Reg); return getKillRegState(!IsLiveIn); } static bool produceCompactUnwindFrame(MachineFunction &MF) { const AArch64Subtarget &Subtarget = MF.getSubtarget(); AttributeList Attrs = MF.getFunction().getAttributes(); return Subtarget.isTargetMachO() && !(Subtarget.getTargetLowering()->supportSwiftError() && Attrs.hasAttrSomewhere(Attribute::SwiftError)); } static bool invalidateWindowsRegisterPairing(unsigned Reg1, unsigned Reg2, bool NeedsWinCFI) { // If we are generating register pairs for a Windows function that requires // EH support, then pair consecutive registers only. There are no unwind // opcodes for saves/restores of non-consectuve register pairs. // The unwind opcodes are save_regp, save_regp_x, save_fregp, save_frepg_x. // https://docs.microsoft.com/en-us/cpp/build/arm64-exception-handling // TODO: LR can be paired with any register. We don't support this yet in // the MCLayer. We need to add support for the save_lrpair unwind code. if (!NeedsWinCFI) return false; if (Reg2 == Reg1 + 1) return false; return true; } /// Returns true if Reg1 and Reg2 cannot be paired using a ldp/stp instruction. /// WindowsCFI requires that only consecutive registers can be paired. /// LR and FP need to be allocated together when the frame needs to save /// the frame-record. This means any other register pairing with LR is invalid. static bool invalidateRegisterPairing(unsigned Reg1, unsigned Reg2, bool NeedsWinCFI, bool NeedsFrameRecord) { if (NeedsWinCFI) return invalidateWindowsRegisterPairing(Reg1, Reg2, true); // If we need to store the frame record, don't pair any register // with LR other than FP. if (NeedsFrameRecord) return Reg2 == AArch64::LR; return false; } namespace { struct RegPairInfo { unsigned Reg1 = AArch64::NoRegister; unsigned Reg2 = AArch64::NoRegister; int FrameIdx; int Offset; enum RegType { GPR, FPR64, FPR128 } Type; RegPairInfo() = default; bool isPaired() const { return Reg2 != AArch64::NoRegister; } }; } // end anonymous namespace static void computeCalleeSaveRegisterPairs( MachineFunction &MF, const std::vector &CSI, const TargetRegisterInfo *TRI, SmallVectorImpl &RegPairs, bool &NeedShadowCallStackProlog, bool NeedsFrameRecord) { if (CSI.empty()) return; bool NeedsWinCFI = needsWinCFI(MF); AArch64FunctionInfo *AFI = MF.getInfo(); MachineFrameInfo &MFI = MF.getFrameInfo(); CallingConv::ID CC = MF.getFunction().getCallingConv(); unsigned Count = CSI.size(); (void)CC; // MachO's compact unwind format relies on all registers being stored in // pairs. assert((!produceCompactUnwindFrame(MF) || CC == CallingConv::PreserveMost || (Count & 1) == 0) && "Odd number of callee-saved regs to spill!"); int Offset = AFI->getCalleeSavedStackSize(); // On Linux, we will have either one or zero non-paired register. On Windows // with CFI, we can have multiple unpaired registers in order to utilize the // available unwind codes. This flag assures that the alignment fixup is done // only once, as intened. bool FixupDone = false; for (unsigned i = 0; i < Count; ++i) { RegPairInfo RPI; RPI.Reg1 = CSI[i].getReg(); if (AArch64::GPR64RegClass.contains(RPI.Reg1)) RPI.Type = RegPairInfo::GPR; else if (AArch64::FPR64RegClass.contains(RPI.Reg1)) RPI.Type = RegPairInfo::FPR64; else if (AArch64::FPR128RegClass.contains(RPI.Reg1)) RPI.Type = RegPairInfo::FPR128; else llvm_unreachable("Unsupported register class."); // Add the next reg to the pair if it is in the same register class. if (i + 1 < Count) { unsigned NextReg = CSI[i + 1].getReg(); switch (RPI.Type) { case RegPairInfo::GPR: if (AArch64::GPR64RegClass.contains(NextReg) && !invalidateRegisterPairing(RPI.Reg1, NextReg, NeedsWinCFI, NeedsFrameRecord)) RPI.Reg2 = NextReg; break; case RegPairInfo::FPR64: if (AArch64::FPR64RegClass.contains(NextReg) && !invalidateWindowsRegisterPairing(RPI.Reg1, NextReg, NeedsWinCFI)) RPI.Reg2 = NextReg; break; case RegPairInfo::FPR128: if (AArch64::FPR128RegClass.contains(NextReg)) RPI.Reg2 = NextReg; break; } } // If either of the registers to be saved is the lr register, it means that // we also need to save lr in the shadow call stack. if ((RPI.Reg1 == AArch64::LR || RPI.Reg2 == AArch64::LR) && MF.getFunction().hasFnAttribute(Attribute::ShadowCallStack)) { if (!MF.getSubtarget().isXRegisterReserved(18)) report_fatal_error("Must reserve x18 to use shadow call stack"); NeedShadowCallStackProlog = true; } // GPRs and FPRs are saved in pairs of 64-bit regs. We expect the CSI // list to come in sorted by frame index so that we can issue the store // pair instructions directly. Assert if we see anything otherwise. // // The order of the registers in the list is controlled by // getCalleeSavedRegs(), so they will always be in-order, as well. assert((!RPI.isPaired() || (CSI[i].getFrameIdx() + 1 == CSI[i + 1].getFrameIdx())) && "Out of order callee saved regs!"); assert((!RPI.isPaired() || !NeedsFrameRecord || RPI.Reg2 != AArch64::FP || RPI.Reg1 == AArch64::LR) && "FrameRecord must be allocated together with LR"); // MachO's compact unwind format relies on all registers being stored in // adjacent register pairs. assert((!produceCompactUnwindFrame(MF) || CC == CallingConv::PreserveMost || (RPI.isPaired() && ((RPI.Reg1 == AArch64::LR && RPI.Reg2 == AArch64::FP) || RPI.Reg1 + 1 == RPI.Reg2))) && "Callee-save registers not saved as adjacent register pair!"); RPI.FrameIdx = CSI[i].getFrameIdx(); int Scale = RPI.Type == RegPairInfo::FPR128 ? 16 : 8; Offset -= RPI.isPaired() ? 2 * Scale : Scale; // Round up size of non-pair to pair size if we need to pad the // callee-save area to ensure 16-byte alignment. if (AFI->hasCalleeSaveStackFreeSpace() && !FixupDone && RPI.Type != RegPairInfo::FPR128 && !RPI.isPaired()) { FixupDone = true; Offset -= 8; assert(Offset % 16 == 0); assert(MFI.getObjectAlignment(RPI.FrameIdx) <= 16); MFI.setObjectAlignment(RPI.FrameIdx, 16); } assert(Offset % Scale == 0); RPI.Offset = Offset / Scale; assert((RPI.Offset >= -64 && RPI.Offset <= 63) && "Offset out of bounds for LDP/STP immediate"); RegPairs.push_back(RPI); if (RPI.isPaired()) ++i; } } bool AArch64FrameLowering::spillCalleeSavedRegisters( MachineBasicBlock &MBB, MachineBasicBlock::iterator MI, const std::vector &CSI, const TargetRegisterInfo *TRI) const { MachineFunction &MF = *MBB.getParent(); const TargetInstrInfo &TII = *MF.getSubtarget().getInstrInfo(); bool NeedsWinCFI = needsWinCFI(MF); DebugLoc DL; SmallVector RegPairs; bool NeedShadowCallStackProlog = false; computeCalleeSaveRegisterPairs(MF, CSI, TRI, RegPairs, NeedShadowCallStackProlog, hasFP(MF)); const MachineRegisterInfo &MRI = MF.getRegInfo(); if (NeedShadowCallStackProlog) { // Shadow call stack prolog: str x30, [x18], #8 BuildMI(MBB, MI, DL, TII.get(AArch64::STRXpost)) .addReg(AArch64::X18, RegState::Define) .addReg(AArch64::LR) .addReg(AArch64::X18) .addImm(8) .setMIFlag(MachineInstr::FrameSetup); if (NeedsWinCFI) BuildMI(MBB, MI, DL, TII.get(AArch64::SEH_Nop)) .setMIFlag(MachineInstr::FrameSetup); if (!MF.getFunction().hasFnAttribute(Attribute::NoUnwind)) { // Emit a CFI instruction that causes 8 to be subtracted from the value of // x18 when unwinding past this frame. static const char CFIInst[] = { dwarf::DW_CFA_val_expression, 18, // register 2, // length static_cast(unsigned(dwarf::DW_OP_breg18)), static_cast(-8) & 0x7f, // addend (sleb128) }; unsigned CFIIndex = MF.addFrameInst(MCCFIInstruction::createEscape( nullptr, StringRef(CFIInst, sizeof(CFIInst)))); BuildMI(MBB, MI, DL, TII.get(AArch64::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex) .setMIFlag(MachineInstr::FrameSetup); } // This instruction also makes x18 live-in to the entry block. MBB.addLiveIn(AArch64::X18); } for (auto RPII = RegPairs.rbegin(), RPIE = RegPairs.rend(); RPII != RPIE; ++RPII) { RegPairInfo RPI = *RPII; unsigned Reg1 = RPI.Reg1; unsigned Reg2 = RPI.Reg2; unsigned StrOpc; // Issue sequence of spills for cs regs. The first spill may be converted // to a pre-decrement store later by emitPrologue if the callee-save stack // area allocation can't be combined with the local stack area allocation. // For example: // stp x22, x21, [sp, #0] // addImm(+0) // stp x20, x19, [sp, #16] // addImm(+2) // stp fp, lr, [sp, #32] // addImm(+4) // Rationale: This sequence saves uop updates compared to a sequence of // pre-increment spills like stp xi,xj,[sp,#-16]! // Note: Similar rationale and sequence for restores in epilog. unsigned Size, Align; switch (RPI.Type) { case RegPairInfo::GPR: StrOpc = RPI.isPaired() ? AArch64::STPXi : AArch64::STRXui; Size = 8; Align = 8; break; case RegPairInfo::FPR64: StrOpc = RPI.isPaired() ? AArch64::STPDi : AArch64::STRDui; Size = 8; Align = 8; break; case RegPairInfo::FPR128: StrOpc = RPI.isPaired() ? AArch64::STPQi : AArch64::STRQui; Size = 16; Align = 16; break; } LLVM_DEBUG(dbgs() << "CSR spill: (" << printReg(Reg1, TRI); if (RPI.isPaired()) dbgs() << ", " << printReg(Reg2, TRI); dbgs() << ") -> fi#(" << RPI.FrameIdx; if (RPI.isPaired()) dbgs() << ", " << RPI.FrameIdx + 1; dbgs() << ")\n"); assert((!NeedsWinCFI || !(Reg1 == AArch64::LR && Reg2 == AArch64::FP)) && "Windows unwdinding requires a consecutive (FP,LR) pair"); // Windows unwind codes require consecutive registers if registers are // paired. Make the switch here, so that the code below will save (x,x+1) // and not (x+1,x). unsigned FrameIdxReg1 = RPI.FrameIdx; unsigned FrameIdxReg2 = RPI.FrameIdx + 1; if (NeedsWinCFI && RPI.isPaired()) { std::swap(Reg1, Reg2); std::swap(FrameIdxReg1, FrameIdxReg2); } MachineInstrBuilder MIB = BuildMI(MBB, MI, DL, TII.get(StrOpc)); if (!MRI.isReserved(Reg1)) MBB.addLiveIn(Reg1); if (RPI.isPaired()) { if (!MRI.isReserved(Reg2)) MBB.addLiveIn(Reg2); MIB.addReg(Reg2, getPrologueDeath(MF, Reg2)); MIB.addMemOperand(MF.getMachineMemOperand( MachinePointerInfo::getFixedStack(MF, FrameIdxReg2), MachineMemOperand::MOStore, Size, Align)); } MIB.addReg(Reg1, getPrologueDeath(MF, Reg1)) .addReg(AArch64::SP) .addImm(RPI.Offset) // [sp, #offset*scale], // where factor*scale is implicit .setMIFlag(MachineInstr::FrameSetup); MIB.addMemOperand(MF.getMachineMemOperand( MachinePointerInfo::getFixedStack(MF,FrameIdxReg1), MachineMemOperand::MOStore, Size, Align)); if (NeedsWinCFI) InsertSEH(MIB, TII, MachineInstr::FrameSetup); } return true; } bool AArch64FrameLowering::restoreCalleeSavedRegisters( MachineBasicBlock &MBB, MachineBasicBlock::iterator MI, std::vector &CSI, const TargetRegisterInfo *TRI) const { MachineFunction &MF = *MBB.getParent(); const TargetInstrInfo &TII = *MF.getSubtarget().getInstrInfo(); DebugLoc DL; SmallVector RegPairs; bool NeedsWinCFI = needsWinCFI(MF); if (MI != MBB.end()) DL = MI->getDebugLoc(); bool NeedShadowCallStackProlog = false; computeCalleeSaveRegisterPairs(MF, CSI, TRI, RegPairs, NeedShadowCallStackProlog, hasFP(MF)); auto EmitMI = [&](const RegPairInfo &RPI) { unsigned Reg1 = RPI.Reg1; unsigned Reg2 = RPI.Reg2; // Issue sequence of restores for cs regs. The last restore may be converted // to a post-increment load later by emitEpilogue if the callee-save stack // area allocation can't be combined with the local stack area allocation. // For example: // ldp fp, lr, [sp, #32] // addImm(+4) // ldp x20, x19, [sp, #16] // addImm(+2) // ldp x22, x21, [sp, #0] // addImm(+0) // Note: see comment in spillCalleeSavedRegisters() unsigned LdrOpc; unsigned Size, Align; switch (RPI.Type) { case RegPairInfo::GPR: LdrOpc = RPI.isPaired() ? AArch64::LDPXi : AArch64::LDRXui; Size = 8; Align = 8; break; case RegPairInfo::FPR64: LdrOpc = RPI.isPaired() ? AArch64::LDPDi : AArch64::LDRDui; Size = 8; Align = 8; break; case RegPairInfo::FPR128: LdrOpc = RPI.isPaired() ? AArch64::LDPQi : AArch64::LDRQui; Size = 16; Align = 16; break; } LLVM_DEBUG(dbgs() << "CSR restore: (" << printReg(Reg1, TRI); if (RPI.isPaired()) dbgs() << ", " << printReg(Reg2, TRI); dbgs() << ") -> fi#(" << RPI.FrameIdx; if (RPI.isPaired()) dbgs() << ", " << RPI.FrameIdx + 1; dbgs() << ")\n"); // Windows unwind codes require consecutive registers if registers are // paired. Make the switch here, so that the code below will save (x,x+1) // and not (x+1,x). unsigned FrameIdxReg1 = RPI.FrameIdx; unsigned FrameIdxReg2 = RPI.FrameIdx + 1; if (NeedsWinCFI && RPI.isPaired()) { std::swap(Reg1, Reg2); std::swap(FrameIdxReg1, FrameIdxReg2); } MachineInstrBuilder MIB = BuildMI(MBB, MI, DL, TII.get(LdrOpc)); if (RPI.isPaired()) { MIB.addReg(Reg2, getDefRegState(true)); MIB.addMemOperand(MF.getMachineMemOperand( MachinePointerInfo::getFixedStack(MF, FrameIdxReg2), MachineMemOperand::MOLoad, Size, Align)); } MIB.addReg(Reg1, getDefRegState(true)) .addReg(AArch64::SP) .addImm(RPI.Offset) // [sp, #offset*scale] // where factor*scale is implicit .setMIFlag(MachineInstr::FrameDestroy); MIB.addMemOperand(MF.getMachineMemOperand( MachinePointerInfo::getFixedStack(MF, FrameIdxReg1), MachineMemOperand::MOLoad, Size, Align)); if (NeedsWinCFI) InsertSEH(MIB, TII, MachineInstr::FrameDestroy); }; if (ReverseCSRRestoreSeq) for (const RegPairInfo &RPI : reverse(RegPairs)) EmitMI(RPI); else for (const RegPairInfo &RPI : RegPairs) EmitMI(RPI); if (NeedShadowCallStackProlog) { // Shadow call stack epilog: ldr x30, [x18, #-8]! BuildMI(MBB, MI, DL, TII.get(AArch64::LDRXpre)) .addReg(AArch64::X18, RegState::Define) .addReg(AArch64::LR, RegState::Define) .addReg(AArch64::X18) .addImm(-8) .setMIFlag(MachineInstr::FrameDestroy); } return true; } void AArch64FrameLowering::determineCalleeSaves(MachineFunction &MF, BitVector &SavedRegs, RegScavenger *RS) const { // All calls are tail calls in GHC calling conv, and functions have no // prologue/epilogue. if (MF.getFunction().getCallingConv() == CallingConv::GHC) return; TargetFrameLowering::determineCalleeSaves(MF, SavedRegs, RS); const AArch64RegisterInfo *RegInfo = static_cast( MF.getSubtarget().getRegisterInfo()); AArch64FunctionInfo *AFI = MF.getInfo(); unsigned UnspilledCSGPR = AArch64::NoRegister; unsigned UnspilledCSGPRPaired = AArch64::NoRegister; MachineFrameInfo &MFI = MF.getFrameInfo(); const MCPhysReg *CSRegs = MF.getRegInfo().getCalleeSavedRegs(); unsigned BasePointerReg = RegInfo->hasBasePointer(MF) ? RegInfo->getBaseRegister() : (unsigned)AArch64::NoRegister; unsigned ExtraCSSpill = 0; // Figure out which callee-saved registers to save/restore. for (unsigned i = 0; CSRegs[i]; ++i) { const unsigned Reg = CSRegs[i]; // Add the base pointer register to SavedRegs if it is callee-save. if (Reg == BasePointerReg) SavedRegs.set(Reg); bool RegUsed = SavedRegs.test(Reg); unsigned PairedReg = CSRegs[i ^ 1]; if (!RegUsed) { if (AArch64::GPR64RegClass.contains(Reg) && !RegInfo->isReservedReg(MF, Reg)) { UnspilledCSGPR = Reg; UnspilledCSGPRPaired = PairedReg; } continue; } // MachO's compact unwind format relies on all registers being stored in // pairs. // FIXME: the usual format is actually better if unwinding isn't needed. if (produceCompactUnwindFrame(MF) && PairedReg != AArch64::NoRegister && !SavedRegs.test(PairedReg)) { SavedRegs.set(PairedReg); if (AArch64::GPR64RegClass.contains(PairedReg) && !RegInfo->isReservedReg(MF, PairedReg)) ExtraCSSpill = PairedReg; } } // Calculates the callee saved stack size. unsigned CSStackSize = 0; const TargetRegisterInfo *TRI = MF.getSubtarget().getRegisterInfo(); const MachineRegisterInfo &MRI = MF.getRegInfo(); for (unsigned Reg : SavedRegs.set_bits()) CSStackSize += TRI->getRegSizeInBits(Reg, MRI) / 8; // Save number of saved regs, so we can easily update CSStackSize later. unsigned NumSavedRegs = SavedRegs.count(); // The frame record needs to be created by saving the appropriate registers unsigned EstimatedStackSize = MFI.estimateStackSize(MF); if (hasFP(MF) || windowsRequiresStackProbe(MF, EstimatedStackSize + CSStackSize + 16)) { SavedRegs.set(AArch64::FP); SavedRegs.set(AArch64::LR); } LLVM_DEBUG(dbgs() << "*** determineCalleeSaves\nSaved CSRs:"; for (unsigned Reg : SavedRegs.set_bits()) dbgs() << ' ' << printReg(Reg, RegInfo); dbgs() << "\n";); // If any callee-saved registers are used, the frame cannot be eliminated. unsigned MaxAlign = getStackAlignment(); int64_t SVEStackSize = alignTo(determineSVEStackSize(MFI, MaxAlign), MaxAlign); assert(MaxAlign <= 16 && "Cannot align scalable vectors more than 16 bytes"); bool CanEliminateFrame = (SavedRegs.count() == 0) && !SVEStackSize; // The CSR spill slots have not been allocated yet, so estimateStackSize // won't include them. unsigned EstimatedStackSizeLimit = estimateRSStackSizeLimit(MF); // Conservatively always assume BigStack when there are SVE spills. bool BigStack = SVEStackSize || (EstimatedStackSize + CSStackSize) > EstimatedStackSizeLimit; if (BigStack || !CanEliminateFrame || RegInfo->cannotEliminateFrame(MF)) AFI->setHasStackFrame(true); // Estimate if we might need to scavenge a register at some point in order // to materialize a stack offset. If so, either spill one additional // callee-saved register or reserve a special spill slot to facilitate // register scavenging. If we already spilled an extra callee-saved register // above to keep the number of spills even, we don't need to do anything else // here. if (BigStack) { if (!ExtraCSSpill && UnspilledCSGPR != AArch64::NoRegister) { LLVM_DEBUG(dbgs() << "Spilling " << printReg(UnspilledCSGPR, RegInfo) << " to get a scratch register.\n"); SavedRegs.set(UnspilledCSGPR); // MachO's compact unwind format relies on all registers being stored in // pairs, so if we need to spill one extra for BigStack, then we need to // store the pair. if (produceCompactUnwindFrame(MF)) SavedRegs.set(UnspilledCSGPRPaired); ExtraCSSpill = UnspilledCSGPR; } // If we didn't find an extra callee-saved register to spill, create // an emergency spill slot. if (!ExtraCSSpill || MF.getRegInfo().isPhysRegUsed(ExtraCSSpill)) { const TargetRegisterInfo *TRI = MF.getSubtarget().getRegisterInfo(); const TargetRegisterClass &RC = AArch64::GPR64RegClass; unsigned Size = TRI->getSpillSize(RC); unsigned Align = TRI->getSpillAlignment(RC); int FI = MFI.CreateStackObject(Size, Align, false); RS->addScavengingFrameIndex(FI); LLVM_DEBUG(dbgs() << "No available CS registers, allocated fi#" << FI << " as the emergency spill slot.\n"); } } // Adding the size of additional 64bit GPR saves. CSStackSize += 8 * (SavedRegs.count() - NumSavedRegs); unsigned AlignedCSStackSize = alignTo(CSStackSize, 16); LLVM_DEBUG(dbgs() << "Estimated stack frame size: " << EstimatedStackSize + AlignedCSStackSize << " bytes.\n"); // Round up to register pair alignment to avoid additional SP adjustment // instructions. AFI->setCalleeSavedStackSize(AlignedCSStackSize); AFI->setCalleeSaveStackHasFreeSpace(AlignedCSStackSize != CSStackSize); } bool AArch64FrameLowering::enableStackSlotScavenging( const MachineFunction &MF) const { const AArch64FunctionInfo *AFI = MF.getInfo(); return AFI->hasCalleeSaveStackFreeSpace(); } int64_t AArch64FrameLowering::determineSVEStackSize(MachineFrameInfo &MFI, unsigned &MaxAlign) const { // Process all fixed stack objects. int64_t Offset = 0; for (int I = MFI.getObjectIndexBegin(); I != 0; ++I) if (MFI.getStackID(I) == TargetStackID::SVEVector) { int64_t FixedOffset = -MFI.getObjectOffset(I); if (FixedOffset > Offset) Offset = FixedOffset; } // Note: We don't take allocatable stack objects into // account yet, because allocation for those is not yet // implemented. return Offset; } void AArch64FrameLowering::processFunctionBeforeFrameFinalized( MachineFunction &MF, RegScavenger *RS) const { MachineFrameInfo &MFI = MF.getFrameInfo(); assert(getStackGrowthDirection() == TargetFrameLowering::StackGrowsDown && "Upwards growing stack unsupported"); unsigned MaxAlign = getStackAlignment(); int64_t SVEStackSize = determineSVEStackSize(MFI, MaxAlign); AArch64FunctionInfo *AFI = MF.getInfo(); AFI->setStackSizeSVE(alignTo(SVEStackSize, MaxAlign)); assert(MaxAlign <= 16 && "Cannot align scalable vectors more than 16 bytes"); // If this function isn't doing Win64-style C++ EH, we don't need to do // anything. if (!MF.hasEHFunclets()) return; const TargetInstrInfo &TII = *MF.getSubtarget().getInstrInfo(); WinEHFuncInfo &EHInfo = *MF.getWinEHFuncInfo(); MachineBasicBlock &MBB = MF.front(); auto MBBI = MBB.begin(); while (MBBI != MBB.end() && MBBI->getFlag(MachineInstr::FrameSetup)) ++MBBI; // Create an UnwindHelp object. int UnwindHelpFI = MFI.CreateStackObject(/*size*/8, /*alignment*/16, false); EHInfo.UnwindHelpFrameIdx = UnwindHelpFI; // We need to store -2 into the UnwindHelp object at the start of the // function. DebugLoc DL; RS->enterBasicBlockEnd(MBB); RS->backward(std::prev(MBBI)); unsigned DstReg = RS->FindUnusedReg(&AArch64::GPR64commonRegClass); assert(DstReg && "There must be a free register after frame setup"); BuildMI(MBB, MBBI, DL, TII.get(AArch64::MOVi64imm), DstReg).addImm(-2); BuildMI(MBB, MBBI, DL, TII.get(AArch64::STURXi)) .addReg(DstReg, getKillRegState(true)) .addFrameIndex(UnwindHelpFI) .addImm(0); } /// For Win64 AArch64 EH, the offset to the Unwind object is from the SP before /// the update. This is easily retrieved as it is exactly the offset that is set /// in processFunctionBeforeFrameFinalized. int AArch64FrameLowering::getFrameIndexReferencePreferSP( const MachineFunction &MF, int FI, unsigned &FrameReg, bool IgnoreSPUpdates) const { const MachineFrameInfo &MFI = MF.getFrameInfo(); LLVM_DEBUG(dbgs() << "Offset from the SP for " << FI << " is " << MFI.getObjectOffset(FI) << "\n"); FrameReg = AArch64::SP; return MFI.getObjectOffset(FI); } /// The parent frame offset (aka dispFrame) is only used on X86_64 to retrieve /// the parent's frame pointer unsigned AArch64FrameLowering::getWinEHParentFrameOffset( const MachineFunction &MF) const { return 0; } /// Funclets only need to account for space for the callee saved registers, /// as the locals are accounted for in the parent's stack frame. unsigned AArch64FrameLowering::getWinEHFuncletFrameSize( const MachineFunction &MF) const { // This is the size of the pushed CSRs. unsigned CSSize = MF.getInfo()->getCalleeSavedStackSize(); // This is the amount of stack a funclet needs to allocate. return alignTo(CSSize + MF.getFrameInfo().getMaxCallFrameSize(), getStackAlignment()); }