# $NetBSD: t_ifconfig.sh,v 1.11 2016/08/10 22:30:02 kre Exp $ # # Copyright (c) 2015 The NetBSD Foundation, Inc. # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # RUMP_SERVER1=unix://./r1 RUMP_SERVER2=unix://./r2 RUMP_FLAGS=\ "-lrumpnet -lrumpnet_net -lrumpnet_netinet -lrumpnet_netinet6 -lrumpnet_shmif" RUMP_FLAGS="${RUMP_FLAGS} -lrumpdev" TIMEOUT=3 atf_test_case ifconfig_create_destroy cleanup ifconfig_create_destroy_head() { atf_set "descr" "tests of ifconfig create and destroy" atf_set "require.progs" "rump_server" } ifconfig_create_destroy_body() { atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER1} export RUMP_SERVER=${RUMP_SERVER1} # Create and destroy (no address) atf_check -s exit:0 rump.ifconfig shmif0 create atf_check -s exit:0 rump.ifconfig shmif0 destroy # Create and destroy (with an IPv4 address) atf_check -s exit:0 rump.ifconfig shmif0 create atf_check -s exit:0 rump.ifconfig shmif0 linkstr shmbus atf_check -s exit:0 rump.ifconfig shmif0 192.168.0.1/24 atf_check -s exit:0 rump.ifconfig shmif0 up atf_check -s exit:0 rump.ifconfig shmif0 destroy # Create and destroy (with an IPv6 address) atf_check -s exit:0 rump.ifconfig shmif0 create atf_check -s exit:0 rump.ifconfig shmif0 linkstr shmbus atf_check -s exit:0 rump.ifconfig shmif0 inet6 fc00::1 atf_check -s exit:0 rump.ifconfig shmif0 up atf_check -s exit:0 rump.ifconfig shmif0 destroy unset RUMP_SERVER } ifconfig_create_destroy_cleanup() { RUMP_SERVER=${RUMP_SERVER1} rump.halt } atf_test_case ifconfig_options cleanup ifconfig_options_head() { atf_set "descr" "tests of ifconfig options" atf_set "require.progs" "rump_server" } ifconfig_options_body() { export RUMP_SERVER=${RUMP_SERVER1} atf_check -s exit:0 rump_server $RUMP_FLAGS $RUMP_SERVER1 atf_check -s exit:0 -o ignore rump.ifconfig shmif0 create atf_check -s exit:0 -o ignore rump.ifconfig shmif0 linkstr bus1 atf_check -s exit:0 -o ignore rump.ifconfig shmif0 inet 10.0.0.1/24 atf_check -s exit:0 -o ignore rump.ifconfig shmif0 inet6 fc00::1/64 atf_check -s exit:0 -o ignore rump.ifconfig shmif0 up atf_check -s exit:0 -o ignore rump.ifconfig -w 10 $DEBUG && rump.ifconfig shmif0 # ifconfig [-N] interface address_family # -N resolves hostnames atf_check -s exit:0 -o match:'inet 127.0.0.1' rump.ifconfig lo0 inet atf_check -s exit:0 -o match:'inet localhost' rump.ifconfig -N lo0 inet atf_check -s exit:0 -o match:'inet6 ::1' rump.ifconfig lo0 inet6 atf_check -s exit:0 -o match:'inet6 localhost' rump.ifconfig -N lo0 inet6 atf_check -s not-exit:0 -e match:'not supported' rump.ifconfig lo0 atalk atf_check -s not-exit:0 -e match:'not supported' rump.ifconfig -N lo0 atalk atf_check -s exit:0 -o ignore rump.ifconfig lo0 link atf_check -s exit:0 -o ignore rump.ifconfig -N lo0 link # ifconfig [-hLmNvz] interface # -h -v shows statistics in human readable format atf_check -s exit:0 -o ignore rump.ifconfig -h -v lo0 # -L shows IPv6 lifetime atf_check -s exit:0 -o ignore rump.ifconfig shmif0 inet6 fc00::2 \ pltime 100 $DEBUG && rump.ifconfig -L shmif0 atf_check -s exit:0 -o match:'pltime' rump.ifconfig -L shmif0 atf_check -s exit:0 -o match:'vltime' rump.ifconfig -L shmif0 # -m shows all of the supported media (not supported in shmif) $DEBUG && rump.ifconfig -m shmif0 atf_check -s exit:0 -o ignore rump.ifconfig -m shmif0 atf_check -s exit:0 -o match:'localhost' rump.ifconfig -N lo0 atf_check -s exit:0 -o match:'0 packets' rump.ifconfig -v lo0 atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT localhost # -z clears and shows statistics at that point atf_check -s exit:0 -o match:'2 packets' rump.ifconfig -z lo0 atf_check -s exit:0 -o match:'0 packets' rump.ifconfig -v lo0 # ifconfig -a [-bdhLNmsuvz] # -a shows all interfaces in the system $DEBUG && rump.ifconfig -a atf_check -s exit:0 -o match:'shmif0' -o match:'lo0' rump.ifconfig -a # -a -b shows only broadcast interfaces atf_check -s exit:0 -o match:'shmif0' -o not-match:'lo0' rump.ifconfig -a -b # -a -d shows only down interfaces atf_check -s exit:0 -o ignore rump.ifconfig shmif0 down atf_check -s exit:0 -o match:'shmif0' rump.ifconfig -a -d atf_check -s exit:0 -o ignore rump.ifconfig shmif0 up atf_check -s exit:0 -o not-match:'shmif0' rump.ifconfig -a -d atf_check -s exit:0 -o match:'pltime' rump.ifconfig -a -L atf_check -s exit:0 -o match:'vltime' rump.ifconfig -a -L atf_check -s exit:0 -o match:'localhost' rump.ifconfig -a -N atf_check -s exit:0 -o ignore rump.ifconfig -a -m # -a -s shows only interfaces connected to a network # (shmif is always connected) $DEBUG && rump.ifconfig -a -s atf_check -s exit:0 -o ignore rump.ifconfig -a -s # -a -u shows only up interfaces atf_check -s exit:0 -o match:'shmif0' rump.ifconfig -a -u atf_check -s exit:0 -o ignore rump.ifconfig shmif0 down atf_check -s exit:0 -o not-match:'shmif0' rump.ifconfig -a -u atf_check -s exit:0 -o ignore rump.ifconfig shmif0 up atf_check -s exit:0 -o match:'0 packets' rump.ifconfig -a -v atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT localhost atf_check -s exit:0 -o ignore rump.ifconfig shmif0 down atf_check -s exit:0 -o match:'2 packets' rump.ifconfig -a -z atf_check -s exit:0 -o not-match:'2 packets' rump.ifconfig -a -v atf_check -s exit:0 -o match:'0 packets' rump.ifconfig -a -v atf_check -s exit:0 -o ignore rump.ifconfig shmif0 up # ifconfig -l [-bdsu] # -l shows only inteface names atf_check -s exit:0 -o match:'lo0' rump.ifconfig -l atf_check -s exit:0 -o match:'shmif0' rump.ifconfig -l atf_check -s exit:0 -o match:'shmif0' rump.ifconfig -l -b atf_check -s exit:0 -o not-match:'lo0' rump.ifconfig -l -b atf_check -s exit:0 -o ignore rump.ifconfig -l -d atf_check -s exit:0 -o match:'lo0' rump.ifconfig -l -s atf_check -s exit:0 -o match:'shmif0' rump.ifconfig -l -s atf_check -s exit:0 -o match:'lo0' rump.ifconfig -l -u atf_check -s exit:0 -o match:'shmif0' rump.ifconfig -l -u # ifconfig -s interface # -s interface exists with 0 / 1 if connected / disconnected atf_check -s exit:0 -o empty rump.ifconfig -s lo0 atf_check -s exit:0 -o empty rump.ifconfig -s shmif0 # ifconfig -C # -C shows all of the interface cloners available on the system atf_check -s exit:0 -o match:'shmif lo carp' rump.ifconfig -C unset RUMP_SERVER } ifconfig_options_cleanup() { env RUMP_SERVER=${RUMP_SERVER1} rump.halt } atf_test_case ifconfig_parameters cleanup ifconfig_parameters_head() { atf_set "descr" "tests of interface parameters" atf_set "require.progs" "rump_server" } ifconfig_parameters_body() { local interval= atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER1} atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER2} export RUMP_SERVER=${RUMP_SERVER1} atf_check -s exit:0 rump.ifconfig shmif0 create atf_check -s exit:0 rump.ifconfig shmif0 linkstr shmbus atf_check -s exit:0 rump.ifconfig shmif0 192.168.0.1/24 atf_check -s exit:0 rump.ifconfig shmif0 up unset RUMP_SERVER export RUMP_SERVER=${RUMP_SERVER2} atf_check -s exit:0 rump.ifconfig shmif0 create atf_check -s exit:0 rump.ifconfig shmif0 linkstr shmbus atf_check -s exit:0 rump.ifconfig shmif0 192.168.0.2/24 atf_check -s exit:0 rump.ifconfig shmif0 inet 192.168.0.3/24 alias atf_check -s exit:0 rump.ifconfig shmif0 up unset RUMP_SERVER export RUMP_SERVER=${RUMP_SERVER1} # active atf_check -s exit:0 rump.ifconfig shmif0 link b2:a0:75:00:00:01 active atf_check -s exit:0 -o match:'address:.b2:a0:75:00:00:01' \ rump.ifconfig shmif0 # down, up atf_check -s exit:0 rump.ifconfig shmif0 down atf_check -s ignore -o ignore -e match:'down' rump.ping -c 1 \ -w $TIMEOUT -n 192.168.0.2 atf_check -s exit:0 rump.ifconfig shmif0 up atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT -n 192.168.0.2 # alias atf_check -s exit:0 rump.ifconfig shmif0 inet 192.168.1.1/24 alias atf_check -s exit:0 -o match:'alias 192.168.1.1' rump.ifconfig shmif0 atf_check -s exit:0 rump.ifconfig shmif0 inet 192.168.1.1/24 -alias atf_check -s exit:0 -o not-match:'192.168.1.1' rump.ifconfig shmif0 atf_check -s exit:0 rump.ifconfig shmif0 inet6 fc00::1 atf_check -s exit:0 rump.ifconfig shmif0 inet6 fc00::2 atf_check -s exit:0 -o match:'fc00::1' rump.ifconfig shmif0 inet6 atf_check -s exit:0 -o match:'fc00::2' rump.ifconfig shmif0 inet6 # delete atf_check -s exit:0 rump.ifconfig shmif0 inet 192.168.1.1 alias atf_check -s exit:0 rump.ifconfig shmif0 inet 192.168.1.1 delete atf_check -s exit:0 -o not-match:'192.168.1.1' rump.ifconfig shmif0 inet atf_check -s exit:0 rump.ifconfig shmif0 inet 192.168.0.1 delete atf_check -s exit:0 -o not-match:'192.168.0.1' rump.ifconfig shmif0 inet atf_check -s exit:0 rump.ifconfig shmif0 inet6 fc00::1 delete atf_check -s exit:0 rump.ifconfig shmif0 inet6 fc00::2 delete atf_check -s exit:0 -o not-match:'fc00::1' rump.ifconfig shmif0 inet6 atf_check -s exit:0 -o not-match:'fc00::2' rump.ifconfig shmif0 inet6 # can delete inactive link atf_check -s exit:0 rump.ifconfig shmif0 link b2:a0:75:00:00:02 atf_check -s exit:0 rump.ifconfig shmif0 link b2:a0:75:00:00:02 delete # cannot delete active link atf_check -s not-exit:0 -e match:'SIOCDLIFADDR: Device busy' \ rump.ifconfig shmif0 link b2:a0:75:00:00:01 delete atf_check -s exit:0 rump.ifconfig shmif0 inet 192.168.0.1/24 # arp atf_check -s exit:0 rump.ifconfig shmif0 -arp atf_check -s not-exit:0 -o ignore -e ignore \ rump.ping -c 1 -w $TIMEOUT -n 192.168.0.3 atf_check -s exit:0 -o not-match:'192.168.0.3' rump.arp -an # The entry shouldn't appear in the routing table anymore atf_check -s exit:0 -o not-match:'192.168.0.3' rump.netstat -nr # netmask atf_check -s exit:0 rump.ifconfig shmif0 inet 172.16.0.1 netmask 255.255.255.0 alias atf_check -s exit:0 -o match:'172.16.0/24' rump.netstat -rn -f inet atf_check -s exit:0 rump.ifconfig shmif0 inet 172.16.0.1 delete # broadcast (does it not work?) atf_check -s exit:0 rump.ifconfig shmif0 inet 172.16.0.1 \ broadcast 255.255.255.255 alias atf_check -s exit:0 -o match:'broadcast 255.255.255.255' \ rump.ifconfig shmif0 inet # metric (external only) atf_check -s exit:0 rump.ifconfig shmif0 metric 10 atf_check -s exit:0 rump.ifconfig shmif0 metric 0 # prefixlen atf_check -s exit:0 rump.ifconfig shmif0 inet6 fc00::1 prefixlen 70 atf_check -s exit:0 -o match:'fc00::/70' rump.netstat -rn -f inet6 # anycast atf_check -s exit:0 rump.ifconfig shmif0 inet6 fc00::2 anycast atf_check -s exit:0 -o match:'fc00::2.+anycast' rump.ifconfig shmif0 inet6 # deprecated atf_check -s exit:0 rump.ifconfig shmif0 inet6 fc00::3 deprecated # Not deprecated immediately. Need to wait nd6_timer that does it is scheduled. interval=$(sysctl -n net.inet6.icmp6.nd6_prune) atf_check -s exit:0 sleep $((interval + 1)) atf_check -s exit:0 -o match:'fc00::3.+deprecated' rump.ifconfig shmif0 inet6 atf_check -s exit:0 rump.ifconfig shmif0 inet6 fc00::3 -deprecated atf_check -s exit:0 -o not-match:'fc00::3.+deprecated' rump.ifconfig shmif0 inet6 # pltime atf_check -s exit:0 rump.ifconfig shmif0 inet6 fc00::3 pltime 3 atf_check -s exit:0 -o not-match:'fc00::3.+deprecated' rump.ifconfig shmif0 inet6 atf_check -s exit:0 sleep 5 atf_check -s exit:0 -o match:'fc00::3.+deprecated' rump.ifconfig shmif0 inet6 # eui64 atf_check -s exit:0 rump.ifconfig shmif0 inet6 fc00:1::0 eui64 atf_check -s exit:0 -o match:'fc00:1::' rump.ifconfig shmif0 inet6 unset RUMP_SERVER } ifconfig_parameters_cleanup() { env RUMP_SERVER=${RUMP_SERVER1} rump.halt env RUMP_SERVER=${RUMP_SERVER2} rump.halt } atf_init_test_cases() { atf_add_test_case ifconfig_create_destroy atf_add_test_case ifconfig_options atf_add_test_case ifconfig_parameters }