/** * @copyright * ==================================================================== * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * ==================================================================== * @endcopyright * * @file svn_types.h * @brief Subversion's data types */ #ifndef SVN_TYPES_H #define SVN_TYPES_H /* ### this should go away, but it causes too much breakage right now */ #include #include /* for ULONG_MAX */ #include /* for apr_size_t, apr_int64_t, ... */ #include /* for apr_status_t */ #include /* for apr_pool_t */ #include /* for apr_hash_t */ #include /* for apr_array_push() */ #include /* for apr_time_t */ #include /* for apr_atoi64() */ #ifdef __cplusplus extern "C" { #endif /* __cplusplus */ /** Macro used to mark deprecated functions. * * @since New in 1.6. */ #ifndef SVN_DEPRECATED # if !defined(SWIGPERL) && !defined(SWIGPYTHON) && !defined(SWIGRUBY) # if defined(__GNUC__) && (__GNUC__ >= 4 || (__GNUC__==3 && __GNUC_MINOR__>=1)) # define SVN_DEPRECATED __attribute__((deprecated)) # elif defined(_MSC_VER) && _MSC_VER >= 1300 # define SVN_DEPRECATED __declspec(deprecated) # else # define SVN_DEPRECATED # endif # else # define SVN_DEPRECATED # endif #endif /** Indicate whether the current platform supports unaligned data access. * * On the majority of machines running SVN (x86 / x64), unaligned access * is much cheaper than repeated aligned access. Define this macro to 1 * on those machines. * Unaligned access on other machines (e.g. IA64) will trigger memory * access faults or simply misbehave. * * Note: Some platforms may only support unaligned access for integers * (PowerPC). As a result this macro should only be used to determine * if unaligned access is supported for integers. * * @since New in 1.7. */ #ifndef SVN_UNALIGNED_ACCESS_IS_OK # if defined(_M_IX86) || defined(i386) \ || defined(_M_X64) || defined(__x86_64) \ || defined(__powerpc__) || defined(__ppc__) # define SVN_UNALIGNED_ACCESS_IS_OK 1 # else # define SVN_UNALIGNED_ACCESS_IS_OK 0 # endif #endif /** YABT: Yet Another Boolean Type */ typedef int svn_boolean_t; #ifndef TRUE /** uhh... true */ #define TRUE 1 #endif /* TRUE */ #ifndef FALSE /** uhh... false */ #define FALSE 0 #endif /* FALSE */ /** Subversion error object. * * Defined here, rather than in svn_error.h, to avoid a recursive @#include * situation. */ typedef struct svn_error_t { /** APR error value; possibly an SVN_ custom error code (see * `svn_error_codes.h' for a full listing). */ apr_status_t apr_err; /** Details from the producer of error. * * Note that if this error was generated by Subversion's API, you'll * probably want to use svn_err_best_message() to get a single * descriptive string for this error chain (see the @a child member) * or svn_handle_error2() to print the error chain in full. This is * because Subversion's API functions sometimes add many links to * the error chain that lack details (used only to produce virtual * stack traces). (Use svn_error_purge_tracing() to remove those * trace-only links from the error chain.) */ const char *message; /** Pointer to the error we "wrap" (may be @c NULL). Via this * member, individual error object can be strung together into an * "error chain". */ struct svn_error_t *child; /** The pool in which this error object is allocated. (If * Subversion's APIs are used to manage error chains, then this pool * will contain the whole error chain of which this object is a * member.) */ apr_pool_t *pool; /** Source file where the error originated (iff @c SVN_DEBUG; * undefined otherwise). */ const char *file; /** Source line where the error originated (iff @c SVN_DEBUG; * undefined otherwise). */ long line; } svn_error_t; /* See svn_version.h. Defined here to avoid including svn_version.h from all public headers. */ typedef struct svn_version_t svn_version_t; /** @defgroup APR_ARRAY_compat_macros APR Array Compatibility Helper Macros * These macros are provided by APR itself from version 1.3. * Definitions are provided here for when using older versions of APR. * @{ */ /** index into an apr_array_header_t */ #ifndef APR_ARRAY_IDX #define APR_ARRAY_IDX(ary,i,type) (((type *)(ary)->elts)[i]) #endif /** easier array-pushing syntax */ #ifndef APR_ARRAY_PUSH #define APR_ARRAY_PUSH(ary,type) (*((type *)apr_array_push(ary))) #endif /** @} */ /** @defgroup apr_hash_utilities APR Hash Table Helpers * These functions enable the caller to dereference an APR hash table index * without type casts or temporary variables. * * ### These are private, and may go away when APR implements them natively. * @{ */ /** Return the key of the hash table entry indexed by @a hi. */ const void * svn__apr_hash_index_key(const apr_hash_index_t *hi); /** Return the key length of the hash table entry indexed by @a hi. */ apr_ssize_t svn__apr_hash_index_klen(const apr_hash_index_t *hi); /** Return the value of the hash table entry indexed by @a hi. */ void * svn__apr_hash_index_val(const apr_hash_index_t *hi); /** @} */ /** On Windows, APR_STATUS_IS_ENOTDIR includes several kinds of * invalid-pathname error but not ERROR_INVALID_NAME, so we include it. * We also include ERROR_DIRECTORY as that was not included in apr versions * before 1.4.0 and this fix is not backported */ /* ### These fixes should go into APR. */ #ifndef WIN32 #define SVN__APR_STATUS_IS_ENOTDIR(s) APR_STATUS_IS_ENOTDIR(s) #else #define SVN__APR_STATUS_IS_ENOTDIR(s) (APR_STATUS_IS_ENOTDIR(s) \ || ((s) == APR_OS_START_SYSERR + ERROR_DIRECTORY) \ || ((s) == APR_OS_START_SYSERR + ERROR_INVALID_NAME)) #endif /** @} */ /** The various types of nodes in the Subversion filesystem. */ typedef enum svn_node_kind_t { /** absent */ svn_node_none, /** regular file */ svn_node_file, /** directory */ svn_node_dir, /** something's here, but we don't know what */ svn_node_unknown, /** * symbolic link * @note This value is not currently used by the public API. * @since New in 1.8. */ svn_node_symlink } svn_node_kind_t; /** Return a constant string expressing @a kind as an English word, e.g., * "file", "dir", etc. The string is not localized, as it may be used for * client<->server communications. If the kind is not recognized, return * "unknown". * * @since New in 1.6. */ const char * svn_node_kind_to_word(svn_node_kind_t kind); /** Return the appropriate node_kind for @a word. @a word is as * returned from svn_node_kind_to_word(). If @a word does not * represent a recognized kind or is @c NULL, return #svn_node_unknown. * * @since New in 1.6. */ svn_node_kind_t svn_node_kind_from_word(const char *word); /** Generic three-state property to represent an unknown value for values * that are just like booleans. The values have been set deliberately to * make tristates disjoint from #svn_boolean_t. * * @note It is unsafe to use apr_pcalloc() to allocate these, since '0' is * not a valid value. * * @since New in 1.7. */ typedef enum svn_tristate_t { /** state known to be false (the constant does not evaulate to false) */ svn_tristate_false = 2, /** state known to be true */ svn_tristate_true, /** state could be true or false */ svn_tristate_unknown } svn_tristate_t; /** Return a constant string "true", "false" or NULL representing the value of * @a tristate. * * @since New in 1.7. */ const char * svn_tristate__to_word(svn_tristate_t tristate); /** Return the appropriate tristate for @a word. If @a word is "true", returns * #svn_tristate_true; if @a word is "false", returns #svn_tristate_false, * for all other values (including NULL) returns #svn_tristate_unknown. * * @since New in 1.7. */ svn_tristate_t svn_tristate__from_word(const char * word); /** About Special Files in Subversion * * Subversion denotes files that cannot be portably created or * modified as "special" files (svn_node_special). It stores these * files in the repository as a plain text file with the svn:special * property set. The file contents contain: a platform-specific type * string, a space character, then any information necessary to create * the file on a supported platform. For example, if a symbolic link * were being represented, the repository file would have the * following contents: * * "link /path/to/link/target" * * Where 'link' is the identifier string showing that this special * file should be a symbolic link and '/path/to/link/target' is the * destination of the symbolic link. * * Special files are stored in the text-base exactly as they are * stored in the repository. The platform specific files are created * in the working copy at EOL/keyword translation time using * svn_subst_copy_and_translate2(). If the current platform does not * support a specific special file type, the file is copied into the * working copy as it is seen in the repository. Because of this, * users of other platforms can still view and modify the special * files, even if they do not have their unique properties. * * New types of special files can be added by: * 1. Implementing a platform-dependent routine to create a uniquely * named special file and one to read the special file in * libsvn_subr/io.c. * 2. Creating a new textual name similar to * SVN_SUBST__SPECIAL_LINK_STR in libsvn_subr/subst.c. * 3. Handling the translation/detranslation case for the new type in * create_special_file and detranslate_special_file, using the * routines from 1. */ /** A revision number. */ typedef long int svn_revnum_t; /** Valid revision numbers begin at 0 */ #define SVN_IS_VALID_REVNUM(n) ((n) >= 0) /** The 'official' invalid revision num */ #define SVN_INVALID_REVNUM ((svn_revnum_t) -1) /** Not really invalid...just unimportant -- one day, this can be its * own unique value, for now, just make it the same as * #SVN_INVALID_REVNUM. */ #define SVN_IGNORED_REVNUM ((svn_revnum_t) -1) /** Convert NULL-terminated C string @a str to a revision number. */ #define SVN_STR_TO_REV(str) ((svn_revnum_t) atol(str)) /** * Parse NULL-terminated C string @a str as a revision number and * store its value in @a rev. If @a endptr is non-NULL, then the * address of the first non-numeric character in @a str is stored in * it. If there are no digits in @a str, then @a endptr is set (if * non-NULL), and the error #SVN_ERR_REVNUM_PARSE_FAILURE error is * returned. Negative numbers parsed from @a str are considered * invalid, and result in the same error. * * @since New in 1.5. */ svn_error_t * svn_revnum_parse(svn_revnum_t *rev, const char *str, const char **endptr); /** Originally intended to be used in printf()-style functions to format * revision numbers. Deprecated due to incompatibilities with language * translation tools (e.g. gettext). * * New code should use a bare "%ld" format specifier for formatting revision * numbers. * * @deprecated Provided for backward compatibility with the 1.0 API. */ #define SVN_REVNUM_T_FMT "ld" /** The size of a file in the Subversion FS. */ typedef apr_int64_t svn_filesize_t; /** The 'official' invalid file size constant. */ #define SVN_INVALID_FILESIZE ((svn_filesize_t) -1) /** In printf()-style functions, format file sizes using this. */ #define SVN_FILESIZE_T_FMT APR_INT64_T_FMT #ifndef DOXYGEN_SHOULD_SKIP_THIS /* Parse a base-10 numeric string into a 64-bit unsigned numeric value. */ /* NOTE: Private. For use by Subversion's own code only. See issue #1644. */ /* FIXME: APR should supply a function to do this, such as "apr_atoui64". */ #define svn__atoui64(X) ((apr_uint64_t) apr_atoi64(X)) #endif /** An enum to indicate whether recursion is needed. */ enum svn_recurse_kind { svn_nonrecursive = 1, svn_recursive }; /** The concept of depth for directories. * * @note This is similar to, but not exactly the same as, the WebDAV * and LDAP concepts of depth. * * @since New in 1.5. */ typedef enum svn_depth_t { /* The order of these depths is important: the higher the number, the deeper it descends. This allows us to compare two depths numerically to decide which should govern. */ /** Depth undetermined or ignored. In some contexts, this means the client should choose an appropriate default depth. The server will generally treat it as #svn_depth_infinity. */ svn_depth_unknown = -2, /** Exclude (i.e., don't descend into) directory D. @note In Subversion 1.5, svn_depth_exclude is *not* supported anywhere in the client-side (libsvn_wc/libsvn_client/etc) code; it is only supported as an argument to set_path functions in the ra and repos reporters. (This will enable future versions of Subversion to run updates, etc, against 1.5 servers with proper svn_depth_exclude behavior, once we get a chance to implement client-side support for svn_depth_exclude.) */ svn_depth_exclude = -1, /** Just the named directory D, no entries. Updates will not pull in any files or subdirectories not already present. */ svn_depth_empty = 0, /** D + its file children, but not subdirs. Updates will pull in any files not already present, but not subdirectories. */ svn_depth_files = 1, /** D + immediate children (D and its entries). Updates will pull in any files or subdirectories not already present; those subdirectories' this_dir entries will have depth-empty. */ svn_depth_immediates = 2, /** D + all descendants (full recursion from D). Updates will pull in any files or subdirectories not already present; those subdirectories' this_dir entries will have depth-infinity. Equivalent to the pre-1.5 default update behavior. */ svn_depth_infinity = 3 } svn_depth_t; /** Return a constant string expressing @a depth as an English word, * e.g., "infinity", "immediates", etc. The string is not localized, * as it may be used for client<->server communications. * * @since New in 1.5. */ const char * svn_depth_to_word(svn_depth_t depth); /** Return the appropriate depth for @a depth_str. @a word is as * returned from svn_depth_to_word(). If @a depth_str does not * represent a recognized depth, return #svn_depth_unknown. * * @since New in 1.5. */ svn_depth_t svn_depth_from_word(const char *word); /** Return #svn_depth_infinity if boolean @a recurse is TRUE, else * return #svn_depth_files. * * @note New code should never need to use this, it is called only * from pre-depth APIs, for compatibility. * * @since New in 1.5. */ #define SVN_DEPTH_INFINITY_OR_FILES(recurse) \ ((recurse) ? svn_depth_infinity : svn_depth_files) /** Return #svn_depth_infinity if boolean @a recurse is TRUE, else * return #svn_depth_immediates. * * @note New code should never need to use this, it is called only * from pre-depth APIs, for compatibility. * * @since New in 1.5. */ #define SVN_DEPTH_INFINITY_OR_IMMEDIATES(recurse) \ ((recurse) ? svn_depth_infinity : svn_depth_immediates) /** Return #svn_depth_infinity if boolean @a recurse is TRUE, else * return #svn_depth_empty. * * @note New code should never need to use this, it is called only * from pre-depth APIs, for compatibility. * * @since New in 1.5. */ #define SVN_DEPTH_INFINITY_OR_EMPTY(recurse) \ ((recurse) ? svn_depth_infinity : svn_depth_empty) /** Return a recursion boolean based on @a depth. * * Although much code has been converted to use depth, some code still * takes a recurse boolean. In most cases, it makes sense to treat * unknown or infinite depth as recursive, and any other depth as * non-recursive (which in turn usually translates to #svn_depth_files). */ #define SVN_DEPTH_IS_RECURSIVE(depth) \ ((depth) == svn_depth_infinity || (depth) == svn_depth_unknown) /** * It is sometimes convenient to indicate which parts of an #svn_dirent_t * object you are actually interested in, so that calculating and sending * the data corresponding to the other fields can be avoided. These values * can be used for that purpose. * * @defgroup svn_dirent_fields Dirent fields * @{ */ /** An indication that you are interested in the @c kind field */ #define SVN_DIRENT_KIND 0x00001 /** An indication that you are interested in the @c size field */ #define SVN_DIRENT_SIZE 0x00002 /** An indication that you are interested in the @c has_props field */ #define SVN_DIRENT_HAS_PROPS 0x00004 /** An indication that you are interested in the @c created_rev field */ #define SVN_DIRENT_CREATED_REV 0x00008 /** An indication that you are interested in the @c time field */ #define SVN_DIRENT_TIME 0x00010 /** An indication that you are interested in the @c last_author field */ #define SVN_DIRENT_LAST_AUTHOR 0x00020 /** A combination of all the dirent fields */ #define SVN_DIRENT_ALL ~((apr_uint32_t ) 0) /** @} */ /** A general subversion directory entry. * * @note To allow for extending the #svn_dirent_t structure in future * releases, always use svn_dirent_create() to allocate the stucture. * * @since New in 1.6. */ typedef struct svn_dirent_t { /** node kind */ svn_node_kind_t kind; /** length of file text, or 0 for directories */ svn_filesize_t size; /** does the node have props? */ svn_boolean_t has_props; /** last rev in which this node changed */ svn_revnum_t created_rev; /** time of created_rev (mod-time) */ apr_time_t time; /** author of created_rev */ const char *last_author; /* IMPORTANT: If you extend this struct, check svn_dirent_dup(). */ } svn_dirent_t; /** Return a deep copy of @a dirent, allocated in @a pool. * * @since New in 1.4. */ svn_dirent_t * svn_dirent_dup(const svn_dirent_t *dirent, apr_pool_t *pool); /** * Create a new svn_dirent_t instance with all values initialized to their * not-available values. * * @since New in 1.8. */ svn_dirent_t * svn_dirent_create(apr_pool_t *result_pool); /** Keyword substitution. * * All the keywords Subversion recognizes. * * Note that there is a better, more general proposal out there, which * would take care of both internationalization issues and custom * keywords (e.g., $NetBSD$). See * * @verbatim http://subversion.tigris.org/servlets/ReadMsg?list=dev&msgNo=8921 ===== From: "Jonathan M. Manning" To: dev@subversion.tigris.org Date: Fri, 14 Dec 2001 11:56:54 -0500 Message-ID: <87970000.1008349014@bdldevel.bl.bdx.com> Subject: Re: keywords @endverbatim * * and Eric Gillespie's support of same: * * @verbatim http://subversion.tigris.org/servlets/ReadMsg?list=dev&msgNo=8757 ===== From: "Eric Gillespie, Jr." To: dev@subversion.tigris.org Date: Wed, 12 Dec 2001 09:48:42 -0500 Message-ID: <87k7vsebp1.fsf@vger.pretzelnet.org> Subject: Re: Customizable Keywords @endverbatim * * However, it is considerably more complex than the scheme below. * For now we're going with simplicity, hopefully the more general * solution can be done post-1.0. * * @defgroup svn_types_keywords Keyword definitions * @{ */ /** The maximum size of an expanded or un-expanded keyword. */ #define SVN_KEYWORD_MAX_LEN 255 /** The most recent revision in which this file was changed. */ #define SVN_KEYWORD_REVISION_LONG "LastChangedRevision" /** Short version of LastChangedRevision */ #define SVN_KEYWORD_REVISION_SHORT "Rev" /** Medium version of LastChangedRevision, matching the one CVS uses. * @since New in 1.1. */ #define SVN_KEYWORD_REVISION_MEDIUM "Revision" /** The most recent date (repository time) when this file was changed. */ #define SVN_KEYWORD_DATE_LONG "LastChangedDate" /** Short version of LastChangedDate */ #define SVN_KEYWORD_DATE_SHORT "Date" /** Who most recently committed to this file. */ #define SVN_KEYWORD_AUTHOR_LONG "LastChangedBy" /** Short version of LastChangedBy */ #define SVN_KEYWORD_AUTHOR_SHORT "Author" /** The URL for the head revision of this file. */ #define SVN_KEYWORD_URL_LONG "HeadURL" /** Short version of HeadURL */ #define SVN_KEYWORD_URL_SHORT "URL" /** A compressed combination of the other four keywords. */ #define SVN_KEYWORD_ID "Id" /** A full combination of the first four keywords. * @since New in 1.6. */ #define SVN_KEYWORD_HEADER "Header" /** @} */ /** All information about a commit. * * @note Objects of this type should always be created using the * svn_create_commit_info() function. * * @since New in 1.3. */ typedef struct svn_commit_info_t { /** just-committed revision. */ svn_revnum_t revision; /** server-side date of the commit. */ const char *date; /** author of the commit. */ const char *author; /** error message from post-commit hook, or NULL. */ const char *post_commit_err; /** repository root, may be @c NULL if unknown. @since New in 1.7. */ const char *repos_root; } svn_commit_info_t; /** * Allocate an object of type #svn_commit_info_t in @a pool and * return it. * * The @c revision field of the new struct is set to #SVN_INVALID_REVNUM. * All other fields are initialized to @c NULL. * * @note Any object of the type #svn_commit_info_t should * be created using this function. * This is to provide for extending the svn_commit_info_t in * the future. * * @since New in 1.3. */ svn_commit_info_t * svn_create_commit_info(apr_pool_t *pool); /** * Return a deep copy @a src_commit_info allocated in @a pool. * * @since New in 1.4. */ svn_commit_info_t * svn_commit_info_dup(const svn_commit_info_t *src_commit_info, apr_pool_t *pool); /** * A structure to represent a path that changed for a log entry. * * @note To allow for extending the #svn_log_changed_path2_t structure in * future releases, always use svn_log_changed_path2_create() to allocate * the structure. * * @since New in 1.6. */ typedef struct svn_log_changed_path2_t { /** 'A'dd, 'D'elete, 'R'eplace, 'M'odify */ char action; /** Source path of copy (if any). */ const char *copyfrom_path; /** Source revision of copy (if any). */ svn_revnum_t copyfrom_rev; /** The type of the node, may be svn_node_unknown. */ svn_node_kind_t node_kind; /** Is the text modified, may be svn_tristate_unknown. * @since New in 1.7. */ svn_tristate_t text_modified; /** Are properties modified, may be svn_tristate_unknown. * @since New in 1.7. */ svn_tristate_t props_modified; /* NOTE: Add new fields at the end to preserve binary compatibility. Also, if you add fields here, you have to update svn_log_changed_path2_dup(). */ } svn_log_changed_path2_t; /** * Returns an #svn_log_changed_path2_t, allocated in @a pool with all fields * initialized to NULL, None or empty values. * * @note To allow for extending the #svn_log_changed_path2_t structure in * future releases, this function should always be used to allocate the * structure. * * @since New in 1.6. */ svn_log_changed_path2_t * svn_log_changed_path2_create(apr_pool_t *pool); /** * Return a deep copy of @a changed_path, allocated in @a pool. * * @since New in 1.6. */ svn_log_changed_path2_t * svn_log_changed_path2_dup(const svn_log_changed_path2_t *changed_path, apr_pool_t *pool); /** * A structure to represent a path that changed for a log entry. Same as * the first three fields of #svn_log_changed_path2_t. * * @deprecated Provided for backward compatibility with the 1.5 API. */ typedef struct svn_log_changed_path_t { /** 'A'dd, 'D'elete, 'R'eplace, 'M'odify */ char action; /** Source path of copy (if any). */ const char *copyfrom_path; /** Source revision of copy (if any). */ svn_revnum_t copyfrom_rev; } svn_log_changed_path_t; /** * Return a deep copy of @a changed_path, allocated in @a pool. * * @since New in 1.3. * @deprecated Provided for backward compatibility with the 1.5 API. */ SVN_DEPRECATED svn_log_changed_path_t * svn_log_changed_path_dup(const svn_log_changed_path_t *changed_path, apr_pool_t *pool); /** * A structure to represent all the information about a particular log entry. * * @note To allow for extending the #svn_log_entry_t structure in future * releases, always use svn_log_entry_create() to allocate the structure. * * @since New in 1.5. */ typedef struct svn_log_entry_t { /** A hash containing as keys every path committed in @a revision; the * values are (#svn_log_changed_path_t *) structures. * * The subversion core libraries will always set this field to the same * value as changed_paths2 for compatibility reasons. * * @deprecated Provided for backward compatibility with the 1.5 API. */ apr_hash_t *changed_paths; /** The revision of the commit. */ svn_revnum_t revision; /** The hash of requested revision properties, which may be NULL if it * would contain no revprops. Maps (const char *) property name to * (svn_string_t *) property value. */ apr_hash_t *revprops; /** * Whether or not this message has children. * * When a log operation requests additional merge information, extra log * entries may be returned as a result of this entry. The new entries, are * considered children of the original entry, and will follow it. When * the HAS_CHILDREN flag is set, the receiver should increment its stack * depth, and wait until an entry is provided with SVN_INVALID_REVNUM which * indicates the end of the children. * * For log operations which do not request additional merge information, the * HAS_CHILDREN flag is always FALSE. * * For more information see: * https://svn.apache.org/repos/asf/subversion/trunk/notes/merge-tracking/design.html#commutative-reporting */ svn_boolean_t has_children; /** A hash containing as keys every path committed in @a revision; the * values are (#svn_log_changed_path2_t *) structures. * * If this value is not @c NULL, it MUST have the same value as * changed_paths or svn_log_entry_dup() will not create an identical copy. * * The subversion core libraries will always set this field to the same * value as changed_paths for compatibility with users assuming an older * version. * * @note See http://svn.haxx.se/dev/archive-2010-08/0362.shtml for * further explanation. * * @since New in 1.6. */ apr_hash_t *changed_paths2; /** * Whether @a revision should be interpreted as non-inheritable in the * same sense of #svn_merge_range_t. * * Only set when this #svn_log_entry_t instance is returned by the * libsvn_client mergeinfo apis. Currently always FALSE when the * #svn_log_entry_t instance is reported by the ra layer. * * @since New in 1.7. */ svn_boolean_t non_inheritable; /** * Whether @a revision is a merged revision resulting from a reverse merge. * * @since New in 1.7. */ svn_boolean_t subtractive_merge; /* NOTE: Add new fields at the end to preserve binary compatibility. Also, if you add fields here, you have to update svn_log_entry_dup(). */ } svn_log_entry_t; /** * Returns an #svn_log_entry_t, allocated in @a pool with all fields * initialized to NULL values. * * @note To allow for extending the #svn_log_entry_t structure in future * releases, this function should always be used to allocate the structure. * * @since New in 1.5. */ svn_log_entry_t * svn_log_entry_create(apr_pool_t *pool); /** Return a deep copy of @a log_entry, allocated in @a pool. * * The resulting svn_log_entry_t has @c changed_paths set to the same * value as @c changed_path2. @c changed_paths will be @c NULL if * @c changed_paths2 was @c NULL. * * @since New in 1.6. */ svn_log_entry_t * svn_log_entry_dup(const svn_log_entry_t *log_entry, apr_pool_t *pool); /** The callback invoked by log message loopers, such as * #svn_ra_plugin_t.get_log() and svn_repos_get_logs(). * * This function is invoked once on each log message, in the order * determined by the caller (see above-mentioned functions). * * @a baton is what you think it is, and @a log_entry contains relevant * information for the log message. Any of @a log_entry->author, * @a log_entry->date, or @a log_entry->message may be @c NULL. * * If @a log_entry->date is neither NULL nor the empty string, it was * generated by svn_time_to_cstring() and can be converted to * @c apr_time_t with svn_time_from_cstring(). * * If @a log_entry->changed_paths is non-@c NULL, then it contains as keys * every path committed in @a log_entry->revision; the values are * (#svn_log_changed_path_t *) structures. * * If @a log_entry->has_children is @c TRUE, the message will be followed * immediately by any number of merged revisions (child messages), which are * terminated by an invocation with SVN_INVALID_REVNUM. This usage may * be recursive. * * Use @a pool for temporary allocation. If the caller is iterating * over log messages, invoking this receiver on each, we recommend the * standard pool loop recipe: create a subpool, pass it as @a pool to * each call, clear it after each iteration, destroy it after the loop * is done. (For allocation that must last beyond the lifetime of a * given receiver call, use a pool in @a baton.) * * @since New in 1.5. */ typedef svn_error_t *(*svn_log_entry_receiver_t)( void *baton, svn_log_entry_t *log_entry, apr_pool_t *pool); /** * Similar to #svn_log_entry_receiver_t, except this uses separate * parameters for each part of the log entry. * * @deprecated Provided for backward compatibility with the 1.4 API. */ typedef svn_error_t *(*svn_log_message_receiver_t)( void *baton, apr_hash_t *changed_paths, svn_revnum_t revision, const char *author, const char *date, /* use svn_time_from_cstring() if need apr_time_t */ const char *message, apr_pool_t *pool); /** Callback function type for commits. * * When a commit succeeds, an instance of this is invoked with the * @a commit_info, along with the @a baton closure. * @a pool can be used for temporary allocations. * * @since New in 1.4. */ typedef svn_error_t *(*svn_commit_callback2_t)( const svn_commit_info_t *commit_info, void *baton, apr_pool_t *pool); /** Same as #svn_commit_callback2_t, but uses individual * data elements instead of the #svn_commit_info_t structure * * @deprecated Provided for backward compatibility with the 1.3 API. */ typedef svn_error_t *(*svn_commit_callback_t)( svn_revnum_t new_revision, const char *date, const char *author, void *baton); /** A buffer size that may be used when processing a stream of data. * * @note We don't use this constant any longer, since it is considered to be * unnecessarily large. * * @deprecated Provided for backwards compatibility with the 1.3 API. */ #define SVN_STREAM_CHUNK_SIZE 102400 #ifndef DOXYGEN_SHOULD_SKIP_THIS /* * The maximum amount we (ideally) hold in memory at a time when * processing a stream of data. * * For example, when copying data from one stream to another, do it in * blocks of this size. * * NOTE: This is an internal macro, put here for convenience. * No public API may depend on the particular value of this macro. */ #define SVN__STREAM_CHUNK_SIZE 16384 #endif /** The maximum amount we can ever hold in memory. */ /* FIXME: Should this be the same as SVN_STREAM_CHUNK_SIZE? */ #define SVN_MAX_OBJECT_SIZE (((apr_size_t) -1) / 2) /* ### Note: despite being about mime-TYPES, these probably don't * ### belong in svn_types.h. However, no other header is more * ### appropriate, and didn't feel like creating svn_validate.h for * ### so little. */ /** Validate @a mime_type. * * If @a mime_type does not contain a "/", or ends with non-alphanumeric * data, return #SVN_ERR_BAD_MIME_TYPE, else return success. * * Use @a pool only to find error allocation. * * Goal: to match both "foo/bar" and "foo/bar; charset=blah", without * being too strict about it, but to disallow mime types that have * quotes, newlines, or other garbage on the end, such as might be * unsafe in an HTTP header. */ svn_error_t * svn_mime_type_validate(const char *mime_type, apr_pool_t *pool); /** Return FALSE iff @a mime_type is a textual type. * * All mime types that start with "text/" are textual, plus some special * cases (for example, "image/x-xbitmap"). */ svn_boolean_t svn_mime_type_is_binary(const char *mime_type); /** A user defined callback that subversion will call with a user defined * baton to see if the current operation should be continued. If the operation * should continue, the function should return #SVN_NO_ERROR, if not, it * should return #SVN_ERR_CANCELLED. */ typedef svn_error_t *(*svn_cancel_func_t)(void *cancel_baton); /** * A lock object, for client & server to share. * * A lock represents the exclusive right to add, delete, or modify a * path. A lock is created in a repository, wholly controlled by the * repository. A "lock-token" is the lock's UUID, and can be used to * learn more about a lock's fields, and or/make use of the lock. * Because a lock is immutable, a client is free to not only cache the * lock-token, but the lock's fields too, for convenience. * * Note that the 'is_dav_comment' field is wholly ignored by every * library except for mod_dav_svn. The field isn't even marshalled * over the network to the client. Assuming lock structures are * created with apr_pcalloc(), a default value of 0 is universally safe. * * @note in the current implementation, only files are lockable. * * @since New in 1.2. */ typedef struct svn_lock_t { const char *path; /**< the path this lock applies to */ const char *token; /**< unique URI representing lock */ const char *owner; /**< the username which owns the lock */ const char *comment; /**< (optional) description of lock */ svn_boolean_t is_dav_comment; /**< was comment made by generic DAV client? */ apr_time_t creation_date; /**< when lock was made */ apr_time_t expiration_date; /**< (optional) when lock will expire; If value is 0, lock will never expire. */ } svn_lock_t; /** * Returns an #svn_lock_t, allocated in @a pool with all fields initialized * to NULL values. * * @note To allow for extending the #svn_lock_t structure in the future * releases, this function should always be used to allocate the structure. * * @since New in 1.2. */ svn_lock_t * svn_lock_create(apr_pool_t *pool); /** * Return a deep copy of @a lock, allocated in @a pool. * * @since New in 1.2. */ svn_lock_t * svn_lock_dup(const svn_lock_t *lock, apr_pool_t *pool); /** * Return a formatted Universal Unique IDentifier (UUID) string. * * @since New in 1.4. */ const char * svn_uuid_generate(apr_pool_t *pool); /** * Mergeinfo representing a merge of a range of revisions. * * @since New in 1.5 */ typedef struct svn_merge_range_t { /** * If the 'start' field is less than the 'end' field then 'start' is * exclusive and 'end' inclusive of the range described. This is termed * a forward merge range. If 'start' is greater than 'end' then the * opposite is true. This is termed a reverse merge range. If 'start' * equals 'end' the meaning of the range is not defined. */ svn_revnum_t start; svn_revnum_t end; /** * Whether this merge range should be inherited by treewise * descendants of the path to which the range applies. */ svn_boolean_t inheritable; } svn_merge_range_t; /** * Return a copy of @a range, allocated in @a pool. * * @since New in 1.5. */ svn_merge_range_t * svn_merge_range_dup(const svn_merge_range_t *range, apr_pool_t *pool); /** * Returns true if the changeset committed in revision @a rev is one * of the changesets in the range @a range. * * @since New in 1.5. */ svn_boolean_t svn_merge_range_contains_rev(const svn_merge_range_t *range, svn_revnum_t rev); /** @defgroup node_location_seg_reporting Node location segment reporting. * @{ */ /** * A representation of a segment of an object's version history with an * emphasis on the object's location in the repository as of various * revisions. * * @since New in 1.5. */ typedef struct svn_location_segment_t { /** The beginning (oldest) and ending (youngest) revisions for this segment, both inclusive. */ svn_revnum_t range_start; svn_revnum_t range_end; /** The absolute (sans leading slash) path for this segment. May be NULL to indicate gaps in an object's history. */ const char *path; } svn_location_segment_t; /** * A callback invoked by generators of #svn_location_segment_t * objects, used to report information about a versioned object's * history in terms of its location in the repository filesystem over * time. */ typedef svn_error_t *(*svn_location_segment_receiver_t)( svn_location_segment_t *segment, void *baton, apr_pool_t *pool); /** * Return a deep copy of @a segment, allocated in @a pool. * * @since New in 1.5. */ svn_location_segment_t * svn_location_segment_dup(const svn_location_segment_t *segment, apr_pool_t *pool); /** @} */ /** A line number, such as in a file or a stream. * * @since New in 1.7. */ typedef unsigned long svn_linenum_t; /** The maximum value of an svn_linenum_t. * * @since New in 1.7. */ #define SVN_LINENUM_MAX_VALUE ULONG_MAX #ifdef __cplusplus } #endif /* __cplusplus */ /* * Everybody and their brother needs to deal with svn_error_t, the error * codes, and whatever else. While they *should* go and include svn_error.h * in order to do that... bah. Let's just help everybody out and include * that header whenever somebody grabs svn_types.h. * * Note that we do this at the END of this header so that its contents * are available to svn_error.h (our guards will prevent the circular * include). We also need to do the include *outside* of the cplusplus * guard. */ #include "svn_error.h" /* * Subversion developers may want to use some additional debugging facilities * while working on the code. We'll pull that in here, so individual source * files don't have to include this header manually. */ #ifdef SVN_DEBUG #include "private/svn_debug.h" #endif #endif /* SVN_TYPES_H */