#!/bin/sh # This is rc.conf - a file full of useful variables that you can set # to change the default startup behavior of your system. You should # not edit this file! Put any overrides into one of the ${rc_conf_files} # instead and you will be able to update these defaults later without # spamming your local configuration information. # # The ${rc_conf_files} files should only contain values which override # values set in this file. This eases the upgrade path when defaults # are changed and new features are added. # # All arguments must be in double or single quotes. # # For a more detailed explanation of all the rc.conf variables, please # refer to the rc.conf(5) manual page. # # $FreeBSD$ ############################################################## ### Important initial Boot-time options #################### ############################################################## rc_debug="NO" # Set to YES to enable debugging output from rc.d rc_info="NO" # Enables display of informational messages at boot. rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown early_late_divider="FILESYSTEMS" # Script that separates early/late # stages of the boot process. Make sure you know # the ramifications if you change this. # See rc.conf(5) for more details. swapfile="NO" # Set to name of swapfile if aux swapfile desired. apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). apmd_enable="NO" # Run apmd to handle APM event from userland. apmd_flags="" # Flags to apmd (if enabled). devd_enable="YES" # Run devd, to trigger programs on device tree changes. devd_flags="" # Additional flags for devd(8). kldxref_enable="NO" # Build linker.hints files with kldxref(8). kldxref_clobber="NO" # Overwrite old linker.hints at boot. kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. powerd_enable="NO" # Run powerd to lower our power usage. powerd_flags="" # Flags to powerd (if enabled). tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never tmpsize="20m" # Size of mfs /tmp if created tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never varsize="32m" # Size of mfs /var if created varmfs_flags="-S" # Extra mount options for the mfs /var populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never cleanvar_enable="YES" # Clean the /var directory local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. script_name_sep=" " # Change if your startup scripts' names contain spaces rc_conf_files="/etc/rc.conf /etc/rc.conf.local" # ZFS support zfs_enable="NO" # Set to YES to automatically mount ZFS file systems # Experimental - test before enabling gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab gbde_devices="NO" # Devices to automatically attach (list, or AUTO) gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices gbde_lockdir="/etc" # Where to look for gbde lockfiles # GELI disk encryption configuration. geli_devices="" # List of devices to automatically attach in addition to # GELI devices listed in /etc/fstab. geli_tries="" # Number of times to attempt attaching geli device. # If empty, kern.geom.eli.tries will be used. geli_default_flags="" # Default flags for geli(8). geli_autodetach="YES" # Automatically detach on last close. # Providers are marked as such when all file systems are # mounted. # Example use. #geli_devices="da1 mirror/home" #geli_da1_flags="-p -k /etc/geli/da1.keys" #geli_da1_autodetach="NO" #geli_mirror_home_flags="-k /etc/geli/home.keys" geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted # swap partitions. root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. background_fsck="YES" # Attempt to run fsck in the background where possible. background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. extra_netfs_types="NO" # List of network extra filesystem types for delayed # mount at startup (or NO). ############################################################## ### Network configuration sub-section ###################### ############################################################## ### Basic network and firewall/security options: ### hostname="" # Set this! hostid_enable="YES" # Set host UUID. hostid_file="/etc/hostid" # File with hostuuid. nisdomainname="NO" # Set to NIS domain if using NIS (or NO). dhclient_program="/sbin/dhclient" # Path to dhcp client program. dhclient_flags="" # Extra flags to pass to dhcp client. #dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only background_dhclient="NO" # Start dhcp client in the background. #background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. synchronous_dhclient="YES" # Start dhclient directly on configured # interfaces during startup. firewall_enable="NO" # Set to YES to enable firewall functionality firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) firewall_quiet="NO" # Set to YES to suppress rule display firewall_logging="NO" # Set to YES to enable events logging firewall_flags="" # Flags passed to ipfw when type is a file firewall_myservices="" # List of TCP ports on which this host # offers services firewall_allowservices="" # List of IPs which has access to # $firewall_myservices firewall_trusted="" # List of IPs which has full access to this host firewall_logdeny="NO" # Set to YES to log default denied incoming # packets. firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports # for which denied incoming packets are not # logged. ip_portrange_first="NO" # Set first dynamically allocated port ip_portrange_last="NO" # Set last dynamically allocated port ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon ike_flags="" # Additional flags for IKE daemon ipsec_enable="NO" # Set to YES to run setkey on ipsec_file ipsec_file="/etc/ipsec.conf" # Name of config file for setkey natd_program="/sbin/natd" # path to natd, if you want a different one. natd_enable="NO" # Enable natd (if firewall_enable == YES). natd_interface="" # Public interface or IPaddress to use. natd_flags="" # Additional flags for natd. ipfilter_enable="NO" # Set to YES to enable ipfilter functionality ipfilter_program="/sbin/ipf" # where the ipfilter program lives ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see # /usr/src/contrib/ipfilter/rules for examples ipfilter_flags="" # additional flags for ipfilter ipnat_enable="NO" # Set to YES to enable ipnat functionality ipnat_program="/sbin/ipnat" # where the ipnat program lives ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat ipnat_flags="" # additional flags for ipnat ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" ipfs_enable="NO" # Set to YES to enable saving and restoring # of state tables at shutdown and boot ipfs_program="/sbin/ipfs" # where the ipfs program lives ipfs_flags="" # additional flags for ipfs pf_enable="NO" # Set to YES to enable packet filter (pf) pf_rules="/etc/pf.conf" # rules definition file for pf pf_program="/sbin/pfctl" # where the pfctl program lives pf_flags="" # additional flags for pfctl pflog_enable="NO" # Set to YES to enable packet filter logging pflog_logfile="/var/log/pflog" # where pflogd should store the logfile pflog_program="/sbin/pflogd" # where the pflogd program lives pflog_flags="" # additional flags for pflogd pfsync_enable="NO" # Expose pf state to other hosts for syncing pfsync_syncdev="" # Interface for pfsync to work through pfsync_syncpeer="" # IP address of pfsync peer host pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. log_in_vain="0" # >=1 to log connects to ports w/o listeners. tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). # For the following option you need to have TCP_DROP_SYNFIN set in your # kernel. Please refer to LINT and NOTES for details. tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN # NOTE: this violates the TCP specification icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets network_interfaces="auto" # List of network interfaces (or "auto"). cloned_interfaces="" # List of cloned network interfaces to create. #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. #ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. # #autobridge_interfaces="bridge0" # List of bridges to check #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge # # If you have any sppp(4) interfaces above, you might also want to set # the following parameters. Refer to spppcontrol(8) for their meaning. sppp_interfaces="" # List of sppp interfaces. #sppp_interfaces="isp0" # example: sppp over ISDN #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" gif_interfaces="" # List of GIF tunnels. #gif_interfaces="gif0 gif1" # Examples typically for a router. # Choose correct tunnel addrs. #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. fec_interfaces="" # List of Fast EtherChannels. #fec_interfaces="fec0 fec1" #fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs #fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs # User ppp configuration. ppp_enable="NO" # Start user-ppp (or NO). ppp_program="/usr/sbin/ppp" # Path to user-ppp program. ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". # For details see man page for ppp(8). Default is auto. ppp_nat="YES" # Use PPP's internal network address translation or NO. ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. ppp_user="root" # Which user to run ppp as ### Network daemon (miscellaneous) ### hostapd_enable="NO" # Run hostap daemon. syslogd_enable="YES" # Run syslog daemon (or NO). syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. syslogd_flags="-s" # Flags to syslogd (if enabled). inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. inetd_flags="-wW -C 60" # Optional flags to inetd # # named. It may be possible to run named in a sandbox, man security for # details. # named_enable="NO" # Run named, the DNS server (or NO). named_program="/usr/sbin/named" # path to named, if you want a different one. #named_flags="" # Flags for named named_pidfile="/var/run/named/pid" # Must set this in named.conf as well named_uid="bind" # User to run named as named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it) named_chroot_autoupdate="YES" # Automatically install/update chrooted # components of named. See /etc/rc.d/named. named_symlink_enable="YES" # Symlink the chrooted pid file # # kerberos. Do not run the admin daemons on slave servers # kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC kerberos5_server_flags="" # Additional flags to the kerberos 5 server kadmind5_server_enable="NO" # Run kadmind (or NO) kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon kpasswdd_server_enable="NO" # Run kpasswdd (or NO) kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon rwhod_enable="NO" # Run the rwho daemon (or NO). rwhod_flags="" # Flags for rwhod rarpd_enable="NO" # Run rarpd (or NO). rarpd_flags="" # Flags to rarpd. bootparamd_enable="NO" # Run bootparamd (or NO). bootparamd_flags="" # Flags to bootparamd pppoed_enable="NO" # Run the PPP over Ethernet daemon. pppoed_provider="*" # Provider and ppp(8) config file entry. pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). pppoed_interface="fxp0" # The interface that pppoed runs on. sshd_enable="NO" # Enable sshd sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. sshd_flags="" # Additional flags for sshd. ftpd_enable="NO" # Enable stand-alone ftpd. ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. ftpd_flags="" # Additional flags to stand-alone ftpd. ### Network daemon (NFS): All need rpcbind_enable="YES" ### amd_enable="NO" # Run amd service with $amd_flags (or NO). amd_program="/usr/sbin/amd" # path to amd, if you want a different one. amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" amd_map_program="NO" # Can be set to "ypcat -k amd.master" nfs_client_enable="NO" # This host is an NFS client (or NO). nfs_access_cache="60" # Client cache timeout in seconds nfs_server_enable="NO" # This host is an NFS server (or NO). nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). idmapd_enable="NO" # Run the NFS4 id mapper (YES/NO). idmapd_flags="" # Additional flags for idmapd. mountd_enable="NO" # Run mountd (or NO). mountd_flags="-r" # Flags to mountd (if NFS server enabled). weak_mountd_authentication="NO" # Allow non-root mount requests to be served. nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). nfs_bufpackets="" # bufspace (in packets) for client rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. rpc_statd_flags="" # Flags to rpc.statd (if enabled). rpcbind_enable="NO" # Run the portmapper service (YES/NO). rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. rpcbind_flags="" # Flags to rpcbind (if enabled). rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). keyserv_flags="" # Flags to keyserv (if enabled). ### Network Time Services options: ### timed_enable="NO" # Run the time daemon (or NO). timed_flags="" # Flags to timed (if enabled). ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. ntpdate_flags="-b" # Flags to ntpdate (if enabled). ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" # Flags to ntpd (if enabled). # Network Information Services (NIS) options: All need rpcbind_enable="YES" ### nis_client_enable="NO" # We're an NIS client (or NO). nis_client_flags="" # Flags to ypbind (if enabled). nis_ypset_enable="NO" # Run ypset at boot time (or NO). nis_ypset_flags="" # Flags to ypset (if enabled). nis_server_enable="NO" # We're an NIS server (or NO). nis_server_flags="" # Flags to ypserv (if enabled). nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). ### SNMP daemon ### # Be sure to understand the security implications of running SNMP v1/v2 # in your network. bsnmpd_enable="NO" # Run the SNMP daemon (or NO). bsnmpd_flags="" # Flags for bsnmpd. ### Network routing options: ### defaultrouter="NO" # Set to default gateway (or NO). static_routes="" # Set to static route list (or leave empty). natm_static_routes="" # Set to static route list for NATM (or leave empty). gateway_enable="NO" # Set to YES if this host will be a gateway. router_enable="NO" # Set to YES to enable a routing daemon. router="/sbin/routed" # Name of routing daemon to use if enabled. router_flags="-q" # Flags for routing daemon. mrouted_enable="NO" # Do IPv4 multicast routing. mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast # routing daemon. You need to # install it from package or # port. mrouted_flags="" # Flags for multicast routing daemon. ipxgateway_enable="NO" # Set to YES to enable IPX routing. ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. ipxrouted_flags="" # Flags for IPX routing daemon. arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") accept_sourceroute="NO" # accept source routed packets to us ### ATM interface options: ### atm_enable="NO" # Configure ATM interfaces (or NO). #atm_netif_hea0="atm 1" # Network interfaces for physical interface. #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). #atm_macaddr_hea0="NO" # Override physical MAC address (or NO). #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). atm_pvcs="" # Set to PVC list (or leave empty). atm_arps="" # Set to permanent ARP list (or leave empty). ### ISDN interface options: (see also: /usr/share/examples/isdn) ### isdn_enable="NO" # Enable the ISDN subsystem (or NO). isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). isdn_flags="-dn -d0x1f9" # Flags for isdnd isdn_ttype="cons25" # terminal type for fullscreen mode isdn_screenflags="NO" # screenflags for ${isdn_fsdev} isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace ### Bluetooth ### hcsecd_enable="NO" # Enable hcsecd(8) (or NO) hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file sdpd_enable="NO" # Enable sdpd(8) (or NO) sdpd_control="/var/run/sdp" # sdpd(8) control socket sdpd_groupname="nobody" # set spdp(8) user/group to run as after sdpd_username="nobody" # it initializes bthidd_enable="NO" # Enable bthidd(8) (or NO) bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file ### Miscellaneous network options: ### icmp_bmcastecho="NO" # respond to broadcast ping packets ### IPv6 options: ### ipv6_enable="NO" # Set to YES to set up for IPv6. ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) ipv6_static_routes="" # Set to static route list (or leave empty). #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 # route toward loopback interface. #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. ipv6_router_flags="" # Flags to IPv6 routing daemon. #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local # addrs. #ipv6_router_flags="-q" # If you want to run a routing daemon on an end # node, you should stop advertisement. #ipv6_network_interfaces="ed0 ep0" # Examples for router # or static configuration for end node. # Choose correct prefix value. #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. ipv6_default_interface="NO" # Default output interface for scoped addrs. # Now this works only for IPv6 link local # multicast addrs. rtsol_flags="" # Flags to IPv6 router solicitation. rtadvd_enable="NO" # Set to YES to enable an IPv6 router # advertisement daemon. If set to YES, # this router becomes a possible candidate # IPv6 default router for local subnets. rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. mroute6d_enable="NO" # Do IPv6 multicast routing. mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast # routing daemon. You need to # install it from package or # port. mroute6d_flags="" # Flags to IPv6 multicast routing daemon. stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 # tunneling interface. Specify this entry # to enable 6to4 interface. stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, # to limit peer addr range. Effective value # is 0-31. stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. # If you like, you can set "AUTO" for this. stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH # IPv6-to-IPv4 TCP translator. You also need # faithd(8) setup. ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr # communication. (like ::ffff:a.b.c.d) ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall # functionality ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) ipv6_firewall_quiet="NO" # Set to YES to suppress rule display ipv6_firewall_logging="NO" # Set to YES to enable events logging ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, # see /usr/src/contrib/ipfilter/rules # for examples ip6addrctl_enable="YES" # Set to YES to enable default address selection ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages ############################################################## ### System console options ################################# ############################################################## keyboard="" # keyboard device to use (default /dev/kbd0). keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. keychange="NO" # function keys default values (or NO). cursor="NO" # cursor type {normal|blink|destructive} (or NO). scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). blanktime="300" # blank time (in seconds) or "NO" to turn it off. saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko moused_nondefault_enable="YES" # Treat non-default mice as enabled unless # specifically overriden in rc.conf(5). moused_enable="NO" # Run the mouse daemon. moused_type="auto" # See man page for rc.conf(5) for available settings. moused_port="/dev/psm0" # Set to your mouse port. moused_flags="" # Any additional flags to moused. mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your # language code table, specify alternative range # start like mousechar_start=3, see vidcontrol(1) allscreens_flags="" # Set this vidcontrol mode for all virtual screens allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens ############################################################## ### Mail Transfer Agent (MTA) options ###################### ############################################################## mta_start_script="/etc/rc.sendmail" # Script to start your chosen MTA, called by /etc/rc. # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file sendmail_procname="/usr/sbin/sendmail" # sendmail process name sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" # Flags for localhost-only MTA sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" # Flags for sendmail_msp_queue daemon. ############################################################## ### Miscellaneous administrative options ################### ############################################################## auditd_enable="NO" # Run the audit daemon. auditd_program="/usr/sbin/auditd" # Path to the audit daemon. auditd_flags="" # Which options to pass to the audit daemon. cached_enable="NO" # Run the nsswitch caching daemon. cron_enable="YES" # Run the periodic job daemon. cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). cron_dst="YES" # Handle DST transitions intelligently (YES/NO) cron_flags="" # Which options to pass to the cron daemon. lpd_enable="NO" # Run the line printer daemon. lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. lpd_flags="" # Flags to lpd (if enabled). chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. chkprintcap_flags="-d" # Create missing directories by default. dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). dumpdir="/var/crash" # Directory where crash dumps are to be stored savecore_flags="" # Used if dumpdev is enabled above, and present. enable_quotas="NO" # turn on quotas on startup (or NO). check_quotas="YES" # Check quotas on startup (or NO). quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown quotacheck_flags="-a" # Check all file system quotas (if enabled) accounting_enable="NO" # Turn on process accounting (or NO). ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). # Emulation/compatibility services provided by /etc/rc.d/abi sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). clear_tmp_enable="NO" # Clear /tmp at startup. clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg" # shared library search paths ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" # a.out shared library search paths ldconfig_local_dirs="/usr/local/libdata/ldconfig /usr/X11R6/libdata/ldconfig" # Local directories with ldconfig configuration files. ldconfig_local32_dirs="/usr/local/libdata/ldconfig32 /usr/X11R6/libdata/ldconfig32" # Local directories with 32-bit compatibility ldconfig # configuration files. kern_securelevel_enable="NO" # kernel security level (see init(8)), kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure # Note that setting securelevel to 0 will result # in the system booting with securelevel set to 1, as # init(8) will raise the level when rc(8) completes. update_motd="YES" # update version info in /etc/motd (or NO) entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. # /var/db/entropy-file is preferred if / is not avail. entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. entropy_save_sz="2048" # Size of the entropy cache files. entropy_save_num="8" # Number of entropy cache files to save. harvest_interrupt="YES" # Entropy device harvests interrupt randomness harvest_ethernet="YES" # Entropy device harvests ethernet randomness harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot watchdogd_enable="NO" # Start the software watchdog daemon devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing # devfs(8) rules. devfs_system_ruleset="" # The name of a ruleset to apply to /dev devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to # apply (must be mounted already, i.e. fstab(5)) performance_cx_lowest="HIGH" # Online CPU idle state performance_cpu_freq="NONE" # Online CPU frequency economy_cx_lowest="HIGH" # Offline CPU idle state economy_cpu_freq="NONE" # Offline CPU frequency virecover_enable="YES" # Perform housekeeping for the vi(1) editor ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) # ruleset file. newsyslog_enable="YES" # Run newsyslog at startup. newsyslog_flags="-CN" # Newsyslog flags to create marked files mixer_enable="YES" # Run the sound mixer. ############################################################## ### Jail Configuration ####################################### ############################################################## jail_enable="NO" # Set to NO to disable starting of any jails jail_list="" # Space separated list of names of jails jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail # # To use rc's built-in jail infrastructure create entries for # each jail, specified in jail_list, with the following variables. # NOTES: # - replace 'example' with the jail's name. # - except rootdir, hostname and ip, all of the following variables may be made # global jail variables if you don't specify a jail name (ie. jail_interface). # #jail_example_rootdir="/usr/jail/default" # Jail's root directory #jail_example_hostname="default.domain.com" # Jail's hostname #jail_example_ip="192.168.0.10" # Jail's IP number #jail_example_interface="" # Interface to create the IP alias on #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting #jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for # starting the jail. More than one can be # specified using a trailing number #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping #jail_example_devfs_enable="NO" # mount devfs in the jail #jail_example_fdescfs_enable="NO" # mount fdescfs in the jail #jail_example_procfs_enable="NO" # mount procfs in jail #jail_example_mount_enable="NO" # mount/umount jail's fs #jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail #jail_example_fstab="" # fstab(5) for mount/umount #jail_example_flags="-l -U root" # flags for jail(8) ############################################################## ### Define source_rc_confs, the mechanism used by /etc/rc.* ## ### scripts to source rc_conf_files overrides safely. ## ############################################################## if [ -z "${source_rc_confs_defined}" ]; then source_rc_confs_defined=yes source_rc_confs () { local i sourced_files for i in ${rc_conf_files}; do case ${sourced_files} in *:$i:*) ;; *) sourced_files="${sourced_files}:$i:" if [ -r $i ]; then . $i fi ;; esac done } fi