/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012 by Delphix. All rights reserved. * Copyright (c) 2013 Steven Hartland. All rights reserved. * Copyright (c) 2021, Colm Buckley */ /* * This file contains the functions which analyze the status of a pool. This * include both the status of an active pool, as well as the status exported * pools. Returns one of the ZPOOL_STATUS_* defines describing the status of * the pool. This status is independent (to a certain degree) from the state of * the pool. A pool's state describes only whether or not it is capable of * providing the necessary fault tolerance for data. The status describes the * overall status of devices. A pool that is online can still have a device * that is experiencing errors. * * Only a subset of the possible faults can be detected using 'zpool status', * and not all possible errors correspond to a FMA message ID. The explanation * is left up to the caller, depending on whether it is a live pool or an * import. */ #include #include #include #include #include #include #include "libzfs_impl.h" #include "zfeature_common.h" /* * Message ID table. This must be kept in sync with the ZPOOL_STATUS_* defines * in include/libzfs.h. Note that there are some status results which go past * the end of this table, and hence have no associated message ID. */ static char *zfs_msgid_table[] = { "ZFS-8000-14", /* ZPOOL_STATUS_CORRUPT_CACHE */ "ZFS-8000-2Q", /* ZPOOL_STATUS_MISSING_DEV_R */ "ZFS-8000-3C", /* ZPOOL_STATUS_MISSING_DEV_NR */ "ZFS-8000-4J", /* ZPOOL_STATUS_CORRUPT_LABEL_R */ "ZFS-8000-5E", /* ZPOOL_STATUS_CORRUPT_LABEL_NR */ "ZFS-8000-6X", /* ZPOOL_STATUS_BAD_GUID_SUM */ "ZFS-8000-72", /* ZPOOL_STATUS_CORRUPT_POOL */ "ZFS-8000-8A", /* ZPOOL_STATUS_CORRUPT_DATA */ "ZFS-8000-9P", /* ZPOOL_STATUS_FAILING_DEV */ "ZFS-8000-A5", /* ZPOOL_STATUS_VERSION_NEWER */ "ZFS-8000-EY", /* ZPOOL_STATUS_HOSTID_MISMATCH */ "ZFS-8000-EY", /* ZPOOL_STATUS_HOSTID_ACTIVE */ "ZFS-8000-EY", /* ZPOOL_STATUS_HOSTID_REQUIRED */ "ZFS-8000-HC", /* ZPOOL_STATUS_IO_FAILURE_WAIT */ "ZFS-8000-JQ", /* ZPOOL_STATUS_IO_FAILURE_CONTINUE */ "ZFS-8000-MM", /* ZPOOL_STATUS_IO_FAILURE_MMP */ "ZFS-8000-K4", /* ZPOOL_STATUS_BAD_LOG */ "ZFS-8000-ER", /* ZPOOL_STATUS_ERRATA */ /* * The following results have no message ID. * ZPOOL_STATUS_UNSUP_FEAT_READ * ZPOOL_STATUS_UNSUP_FEAT_WRITE * ZPOOL_STATUS_FAULTED_DEV_R * ZPOOL_STATUS_FAULTED_DEV_NR * ZPOOL_STATUS_VERSION_OLDER * ZPOOL_STATUS_FEAT_DISABLED * ZPOOL_STATUS_RESILVERING * ZPOOL_STATUS_OFFLINE_DEV * ZPOOL_STATUS_REMOVED_DEV * ZPOOL_STATUS_REBUILDING * ZPOOL_STATUS_REBUILD_SCRUB * ZPOOL_STATUS_COMPATIBILITY_ERR * ZPOOL_STATUS_INCOMPATIBLE_FEAT * ZPOOL_STATUS_OK */ }; #define NMSGID (sizeof (zfs_msgid_table) / sizeof (zfs_msgid_table[0])) static int vdev_missing(vdev_stat_t *vs, uint_t vsc) { (void) vsc; return (vs->vs_state == VDEV_STATE_CANT_OPEN && vs->vs_aux == VDEV_AUX_OPEN_FAILED); } static int vdev_faulted(vdev_stat_t *vs, uint_t vsc) { (void) vsc; return (vs->vs_state == VDEV_STATE_FAULTED); } static int vdev_errors(vdev_stat_t *vs, uint_t vsc) { (void) vsc; return (vs->vs_state == VDEV_STATE_DEGRADED || vs->vs_read_errors != 0 || vs->vs_write_errors != 0 || vs->vs_checksum_errors != 0); } static int vdev_broken(vdev_stat_t *vs, uint_t vsc) { (void) vsc; return (vs->vs_state == VDEV_STATE_CANT_OPEN); } static int vdev_offlined(vdev_stat_t *vs, uint_t vsc) { (void) vsc; return (vs->vs_state == VDEV_STATE_OFFLINE); } static int vdev_removed(vdev_stat_t *vs, uint_t vsc) { (void) vsc; return (vs->vs_state == VDEV_STATE_REMOVED); } static int vdev_non_native_ashift(vdev_stat_t *vs, uint_t vsc) { if (getenv("ZPOOL_STATUS_NON_NATIVE_ASHIFT_IGNORE") != NULL) return (0); return (VDEV_STAT_VALID(vs_physical_ashift, vsc) && vs->vs_configured_ashift < vs->vs_physical_ashift); } /* * Detect if any leaf devices that have seen errors or could not be opened. */ static boolean_t find_vdev_problem(nvlist_t *vdev, int (*func)(vdev_stat_t *, uint_t), boolean_t ignore_replacing) { nvlist_t **child; vdev_stat_t *vs; uint_t c, vsc, children; /* * Ignore problems within a 'replacing' vdev, since we're presumably in * the process of repairing any such errors, and don't want to call them * out again. We'll pick up the fact that a resilver is happening * later. */ if (ignore_replacing == B_TRUE) { char *type; verify(nvlist_lookup_string(vdev, ZPOOL_CONFIG_TYPE, &type) == 0); if (strcmp(type, VDEV_TYPE_REPLACING) == 0) return (B_FALSE); } if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (c = 0; c < children; c++) if (find_vdev_problem(child[c], func, ignore_replacing)) return (B_TRUE); } else { verify(nvlist_lookup_uint64_array(vdev, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &vsc) == 0); if (func(vs, vsc) != 0) return (B_TRUE); } /* * Check any L2 cache devs */ if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_L2CACHE, &child, &children) == 0) { for (c = 0; c < children; c++) if (find_vdev_problem(child[c], func, ignore_replacing)) return (B_TRUE); } return (B_FALSE); } /* * Active pool health status. * * To determine the status for a pool, we make several passes over the config, * picking the most egregious error we find. In order of importance, we do the * following: * * - Check for a complete and valid configuration * - Look for any faulted or missing devices in a non-replicated config * - Check for any data errors * - Check for any faulted or missing devices in a replicated config * - Look for any devices showing errors * - Check for any resilvering or rebuilding devices * * There can obviously be multiple errors within a single pool, so this routine * only picks the most damaging of all the current errors to report. */ static zpool_status_t check_status(nvlist_t *config, boolean_t isimport, zpool_errata_t *erratap, const char *compat) { nvlist_t *nvroot; vdev_stat_t *vs; pool_scan_stat_t *ps = NULL; uint_t vsc, psc; uint64_t nerr; uint64_t version; uint64_t stateval; uint64_t suspended; uint64_t hostid = 0; uint64_t errata = 0; unsigned long system_hostid = get_system_hostid(); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION, &version) == 0); verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &vsc) == 0); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE, &stateval) == 0); /* * Currently resilvering a vdev */ (void) nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_SCAN_STATS, (uint64_t **)&ps, &psc); if (ps != NULL && ps->pss_func == POOL_SCAN_RESILVER && ps->pss_state == DSS_SCANNING) return (ZPOOL_STATUS_RESILVERING); /* * Currently rebuilding a vdev, check top-level vdevs. */ vdev_rebuild_stat_t *vrs = NULL; nvlist_t **child; uint_t c, i, children; uint64_t rebuild_end_time = 0; if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (c = 0; c < children; c++) { if ((nvlist_lookup_uint64_array(child[c], ZPOOL_CONFIG_REBUILD_STATS, (uint64_t **)&vrs, &i) == 0) && (vrs != NULL)) { uint64_t state = vrs->vrs_state; if (state == VDEV_REBUILD_ACTIVE) { return (ZPOOL_STATUS_REBUILDING); } else if (state == VDEV_REBUILD_COMPLETE && vrs->vrs_end_time > rebuild_end_time) { rebuild_end_time = vrs->vrs_end_time; } } } /* * If we can determine when the last scrub was run, and it * was before the last rebuild completed, then recommend * that the pool be scrubbed to verify all checksums. When * ps is NULL we can infer the pool has never been scrubbed. */ if (rebuild_end_time > 0) { if (ps != NULL) { if ((ps->pss_state == DSS_FINISHED && ps->pss_func == POOL_SCAN_SCRUB && rebuild_end_time > ps->pss_end_time) || ps->pss_state == DSS_NONE) return (ZPOOL_STATUS_REBUILD_SCRUB); } else { return (ZPOOL_STATUS_REBUILD_SCRUB); } } } /* * The multihost property is set and the pool may be active. */ if (vs->vs_state == VDEV_STATE_CANT_OPEN && vs->vs_aux == VDEV_AUX_ACTIVE) { mmp_state_t mmp_state; nvlist_t *nvinfo; nvinfo = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO); mmp_state = fnvlist_lookup_uint64(nvinfo, ZPOOL_CONFIG_MMP_STATE); if (mmp_state == MMP_STATE_ACTIVE) return (ZPOOL_STATUS_HOSTID_ACTIVE); else if (mmp_state == MMP_STATE_NO_HOSTID) return (ZPOOL_STATUS_HOSTID_REQUIRED); else return (ZPOOL_STATUS_HOSTID_MISMATCH); } /* * Pool last accessed by another system. */ (void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_HOSTID, &hostid); if (hostid != 0 && (unsigned long)hostid != system_hostid && stateval == POOL_STATE_ACTIVE) return (ZPOOL_STATUS_HOSTID_MISMATCH); /* * Newer on-disk version. */ if (vs->vs_state == VDEV_STATE_CANT_OPEN && vs->vs_aux == VDEV_AUX_VERSION_NEWER) return (ZPOOL_STATUS_VERSION_NEWER); /* * Unsupported feature(s). */ if (vs->vs_state == VDEV_STATE_CANT_OPEN && vs->vs_aux == VDEV_AUX_UNSUP_FEAT) { nvlist_t *nvinfo; verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO, &nvinfo) == 0); if (nvlist_exists(nvinfo, ZPOOL_CONFIG_CAN_RDONLY)) return (ZPOOL_STATUS_UNSUP_FEAT_WRITE); return (ZPOOL_STATUS_UNSUP_FEAT_READ); } /* * Check that the config is complete. */ if (vs->vs_state == VDEV_STATE_CANT_OPEN && vs->vs_aux == VDEV_AUX_BAD_GUID_SUM) return (ZPOOL_STATUS_BAD_GUID_SUM); /* * Check whether the pool has suspended. */ if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_SUSPENDED, &suspended) == 0) { uint64_t reason; if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_SUSPENDED_REASON, &reason) == 0 && reason == ZIO_SUSPEND_MMP) return (ZPOOL_STATUS_IO_FAILURE_MMP); if (suspended == ZIO_FAILURE_MODE_CONTINUE) return (ZPOOL_STATUS_IO_FAILURE_CONTINUE); return (ZPOOL_STATUS_IO_FAILURE_WAIT); } /* * Could not read a log. */ if (vs->vs_state == VDEV_STATE_CANT_OPEN && vs->vs_aux == VDEV_AUX_BAD_LOG) { return (ZPOOL_STATUS_BAD_LOG); } /* * Bad devices in non-replicated config. */ if (vs->vs_state == VDEV_STATE_CANT_OPEN && find_vdev_problem(nvroot, vdev_faulted, B_TRUE)) return (ZPOOL_STATUS_FAULTED_DEV_NR); if (vs->vs_state == VDEV_STATE_CANT_OPEN && find_vdev_problem(nvroot, vdev_missing, B_TRUE)) return (ZPOOL_STATUS_MISSING_DEV_NR); if (vs->vs_state == VDEV_STATE_CANT_OPEN && find_vdev_problem(nvroot, vdev_broken, B_TRUE)) return (ZPOOL_STATUS_CORRUPT_LABEL_NR); /* * Corrupted pool metadata */ if (vs->vs_state == VDEV_STATE_CANT_OPEN && vs->vs_aux == VDEV_AUX_CORRUPT_DATA) return (ZPOOL_STATUS_CORRUPT_POOL); /* * Persistent data errors. */ if (!isimport) { if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRCOUNT, &nerr) == 0 && nerr != 0) return (ZPOOL_STATUS_CORRUPT_DATA); } /* * Missing devices in a replicated config. */ if (find_vdev_problem(nvroot, vdev_faulted, B_TRUE)) return (ZPOOL_STATUS_FAULTED_DEV_R); if (find_vdev_problem(nvroot, vdev_missing, B_TRUE)) return (ZPOOL_STATUS_MISSING_DEV_R); if (find_vdev_problem(nvroot, vdev_broken, B_TRUE)) return (ZPOOL_STATUS_CORRUPT_LABEL_R); /* * Devices with errors */ if (!isimport && find_vdev_problem(nvroot, vdev_errors, B_TRUE)) return (ZPOOL_STATUS_FAILING_DEV); /* * Offlined devices */ if (find_vdev_problem(nvroot, vdev_offlined, B_TRUE)) return (ZPOOL_STATUS_OFFLINE_DEV); /* * Removed device */ if (find_vdev_problem(nvroot, vdev_removed, B_TRUE)) return (ZPOOL_STATUS_REMOVED_DEV); /* * Suboptimal, but usable, ashift configuration. */ if (find_vdev_problem(nvroot, vdev_non_native_ashift, B_FALSE)) return (ZPOOL_STATUS_NON_NATIVE_ASHIFT); /* * Informational errata available. */ (void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRATA, &errata); if (errata) { *erratap = errata; return (ZPOOL_STATUS_ERRATA); } /* * Outdated, but usable, version */ if (SPA_VERSION_IS_SUPPORTED(version) && version != SPA_VERSION) { /* "legacy" compatibility disables old version reporting */ if (compat != NULL && strcmp(compat, ZPOOL_COMPAT_LEGACY) == 0) return (ZPOOL_STATUS_OK); else return (ZPOOL_STATUS_VERSION_OLDER); } /* * Usable pool with disabled or superfluous features * (superfluous = beyond what's requested by 'compatibility') */ if (version >= SPA_VERSION_FEATURES) { int i; nvlist_t *feat; if (isimport) { feat = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO); if (nvlist_exists(feat, ZPOOL_CONFIG_ENABLED_FEAT)) feat = fnvlist_lookup_nvlist(feat, ZPOOL_CONFIG_ENABLED_FEAT); } else { feat = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_FEATURE_STATS); } /* check against all features, or limited set? */ boolean_t c_features[SPA_FEATURES]; switch (zpool_load_compat(compat, c_features, NULL, 0)) { case ZPOOL_COMPATIBILITY_OK: case ZPOOL_COMPATIBILITY_WARNTOKEN: break; default: return (ZPOOL_STATUS_COMPATIBILITY_ERR); } for (i = 0; i < SPA_FEATURES; i++) { zfeature_info_t *fi = &spa_feature_table[i]; if (!fi->fi_zfs_mod_supported) continue; if (c_features[i] && !nvlist_exists(feat, fi->fi_guid)) return (ZPOOL_STATUS_FEAT_DISABLED); if (!c_features[i] && nvlist_exists(feat, fi->fi_guid)) return (ZPOOL_STATUS_INCOMPATIBLE_FEAT); } } return (ZPOOL_STATUS_OK); } zpool_status_t zpool_get_status(zpool_handle_t *zhp, char **msgid, zpool_errata_t *errata) { /* * pass in the desired feature set, as * it affects check for disabled features */ char compatibility[ZFS_MAXPROPLEN]; if (zpool_get_prop(zhp, ZPOOL_PROP_COMPATIBILITY, compatibility, ZFS_MAXPROPLEN, NULL, B_FALSE) != 0) compatibility[0] = '\0'; zpool_status_t ret = check_status(zhp->zpool_config, B_FALSE, errata, compatibility); if (msgid != NULL) { if (ret >= NMSGID) *msgid = NULL; else *msgid = zfs_msgid_table[ret]; } return (ret); } zpool_status_t zpool_import_status(nvlist_t *config, char **msgid, zpool_errata_t *errata) { zpool_status_t ret = check_status(config, B_TRUE, errata, NULL); if (ret >= NMSGID) *msgid = NULL; else *msgid = zfs_msgid_table[ret]; return (ret); }