.\" $OpenBSD: dhclient.conf.5,v 1.5 2004/11/01 23:10:18 henning Exp $ .\" .\" Copyright (c) 1997 The Internet Software Consortium. .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of The Internet Software Consortium nor the names .\" of its contributors may be used to endorse or promote products derived .\" from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE INTERNET SOFTWARE CONSORTIUM AND .\" CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, .\" INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE .\" DISCLAIMED. IN NO EVENT SHALL THE INTERNET SOFTWARE CONSORTIUM OR .\" CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, .\" SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT .\" LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF .\" USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND .\" ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, .\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT .\" OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" This software has been written for the Internet Software Consortium .\" by Ted Lemon in cooperation with Vixie .\" Enterprises. To learn more about the Internet Software Consortium, .\" see ``http://www.isc.org/isc''. To learn more about Vixie .\" Enterprises, see ``http://www.vix.com''. .\" .\" $FreeBSD$ .\" .Dd May 31, 2018 .Dt DHCLIENT.CONF 5 .Os .Sh NAME .Nm dhclient.conf .Nd DHCP client configuration file .Sh DESCRIPTION The .Nm file contains configuration information for .Xr dhclient 8 , the Internet Software Consortium DHCP Client. .Pp The .Nm file is a free-form ASCII text file. It is parsed by the recursive-descent parser built into .Xr dhclient 8 . The file may contain extra tabs and newlines for formatting purposes. Keywords in the file are case-insensitive. Comments may be placed anywhere within the file (except within quotes). Comments begin with the .Ql # character and end at the end of the line. .Pp The .Nm file can be used to configure the behaviour of the client in a wide variety of ways: protocol timing, information requested from the server, information required of the server, defaults to use if the server does not provide certain information, values with which to override information provided by the server, or values to prepend or append to information provided by the server. The configuration file can also be preinitialized with addresses to use on networks that do not have DHCP servers. .Sh PROTOCOL TIMING The timing behaviour of the client need not be configured by the user. If no timing configuration is provided by the user, a fairly reasonable timing behaviour will be used by default - one which results in fairly timely updates without placing an inordinate load on the server. .Pp The following statements can be used to adjust the timing behaviour of the DHCP client if required, however: .Bl -tag -width indent .It Ic timeout Ar time ; The .Ic timeout statement determines the amount of time that must pass between the time that the client begins to try to determine its address and the time that it decides that it is not going to be able to contact a server. By default, this timeout is sixty seconds. After the timeout has passed, if there are any static leases defined in the configuration file, or any leases remaining in the lease database that have not yet expired, the client will loop through these leases attempting to validate them, and if it finds one that appears to be valid, it will use that lease's address. If there are no valid static leases or unexpired leases in the lease database, the client will restart the protocol after the defined retry interval. .It Ic retry Ar time ; The .Ic retry statement determines the time that must pass after the client has determined that there is no DHCP server present before it tries again to contact a DHCP server. By default, this is five minutes. .It Ic select-timeout Ar time ; It is possible (some might say desirable) for there to be more than one DHCP server serving any given network. In this case, it is possible that a client may be sent more than one offer in response to its initial lease discovery message. It may be that one of these offers is preferable to the other (e.g., one offer may have the address the client previously used, and the other may not). .Pp The .Ic select-timeout is the time after the client sends its first lease discovery request at which it stops waiting for offers from servers, assuming that it has received at least one such offer. If no offers have been received by the time the .Ic select-timeout has expired, the client will accept the first offer that arrives. .Pp By default, the .Ic select-timeout is zero seconds - that is, the client will take the first offer it sees. .It Ic reboot Ar time ; When the client is restarted, it first tries to reacquire the last address it had. This is called the INIT-REBOOT state. If it is still attached to the same network it was attached to when it last ran, this is the quickest way to get started. The .Ic reboot statement sets the time that must elapse after the client first tries to reacquire its old address before it gives up and tries to discover a new address. By default, the reboot timeout is ten seconds. .It Ic backoff-cutoff Ar time ; The client uses an exponential backoff algorithm with some randomness, so that if many clients try to configure themselves at the same time, they will not make their requests in lockstep. The .Ic backoff-cutoff statement determines the maximum amount of time that the client is allowed to back off. It defaults to two minutes. .It Ic initial-interval Ar time ; The .Ic initial-interval statement sets the amount of time between the first attempt to reach a server and the second attempt to reach a server. Each time a message is sent, the interval between messages is incremented by twice the current interval multiplied by a random number between zero and one. If it is greater than the .Ic backoff-cutoff amount, it is set to that amount. It defaults to ten seconds. .El .Sh LEASE REQUIREMENTS AND REQUESTS The DHCP protocol allows the client to request that the server send it specific information, and not send it other information that it is not prepared to accept. The protocol also allows the client to reject offers from servers if they do not contain information the client needs, or if the information provided is not satisfactory. .Pp There is a variety of data contained in offers that DHCP servers send to DHCP clients. The data that can be specifically requested is what are called .Em DHCP Options . DHCP Options are defined in .Xr dhcp-options 5 . .Bl -tag -width indent .It Ic request Oo Ar option Oc Oo , Ar ... option Oc ; The .Ic request statement causes the client to request that any server responding to the client send the client its values for the specified options. Only the option names should be specified in the request statement - not option parameters. .It Ic require Oo Ar option Oc Oo , Ar ... option Oc ; The .Ic require statement lists options that must be sent in order for an offer to be accepted. Offers that do not contain all the listed options will be ignored. .It Ic send No { Oo Ar option declaration Oc Oo , Ar ... option declaration Oc } The .Ic send statement causes the client to send the specified options to the server with the specified values. These are full option declarations as described in .Xr dhcp-options 5 . Options that are always sent in the DHCP protocol should not be specified here, except that the client can specify a .Ar dhcp-lease-time option other than the default requested lease time, which is two hours. The other obvious use for this statement is to send information to the server that will allow it to differentiate between this client and other clients or kinds of clients. .El .Sh OPTION MODIFIERS In some cases, a client may receive option data from the server which is not really appropriate for that client, or may not receive information that it needs, and for which a useful default value exists. It may also receive information which is useful, but which needs to be supplemented with local information. To handle these needs, several option modifiers are available. .Bl -tag -width indent .It Xo .Ic default No { Op Ar option declaration .Oo , Ar ... option declaration Oc } .Xc If for some set of options the client should use the value supplied by the server, but needs to use some default value if no value was supplied by the server, these values can be defined in the .Ic default statement. .It Xo .Ic supersede No { Op Ar option declaration .Oo , Ar ... option declaration Oc } .Xc If for some set of options the client should always use its own value rather than any value supplied by the server, these values can be defined in the .Ic supersede statement. .Pp Some options values have special meaning: .Bl -tag -width indent .It Ar interface-mtu Any server-supplied interface MTU is ignored by the client if a .Ic supersede zero value is configured. .El .It Xo .Ic prepend No { Op Ar option declaration .Oo , Ar ... option declaration Oc } .Xc If for some set of options the client should use a value you supply, and then use the values supplied by the server, if any, these values can be defined in the .Ic prepend statement. The .Ic prepend statement can only be used for options which allow more than one value to be given. This restriction is not enforced - if violated, the results are unpredictable. .It Xo .Ic append No { Op Ar option declaration .Oo , Ar ... option declaration Oc } .Xc If for some set of options the client should first use the values supplied by the server, if any, and then use values you supply, these values can be defined in the .Ic append statement. The .Ic append statement can only be used for options which allow more than one value to be given. This restriction is not enforced - if you ignore it, the behaviour will be unpredictable. .El .Sh LEASE DECLARATIONS The lease declaration: .Pp .D1 Ic lease No { Ar lease-declaration Oo Ar ... lease-declaration Oc } .Pp The DHCP client may decide after some period of time (see .Sx PROTOCOL TIMING ) that it is not going to succeed in contacting a server. At that time, it consults its own database of old leases and tests each one that has not yet timed out by pinging the listed router for that lease to see if that lease could work. It is possible to define one or more .Em fixed leases in the client configuration file for networks where there is no DHCP or BOOTP service, so that the client can still automatically configure its address. This is done with the .Ic lease statement. .Pp NOTE: the lease statement is also used in the .Pa dhclient.leases file in order to record leases that have been received from DHCP servers. Some of the syntax for leases as described below is only needed in the .Pa dhclient.leases file. Such syntax is documented here for completeness. .Pp A lease statement consists of the .Ic lease keyword, followed by a left curly brace, followed by one or more lease declaration statements, followed by a right curly brace. The following lease declarations are possible: .Bl -tag -width indent .It Ic bootp ; The .Ic bootp statement is used to indicate that the lease was acquired using the BOOTP protocol rather than the DHCP protocol. It is never necessary to specify this in the client configuration file. The client uses this syntax in its lease database file. .It Ic interface Qq Ar string ; The .Ic interface lease statement is used to indicate the interface on which the lease is valid. If set, this lease will only be tried on a particular interface. When the client receives a lease from a server, it always records the interface number on which it received that lease. If predefined leases are specified in the .Nm file, the interface should also be specified, although this is not required. .It Ic fixed-address Ar ip-address ; The .Ic fixed-address statement is used to set the IP address of a particular lease. This is required for all lease statements. The IP address must be specified as a dotted quad (e.g., .Li 12.34.56.78 ) . .It Ic filename Qq Ar string ; The .Ic filename statement specifies the name of the boot filename to use. This is not used by the standard client configuration script, but is included for completeness. .It Ic server-name Qq Ar string ; The .Ic server-name statement specifies the name of the boot server name to use. This is also not used by the standard client configuration script. .It Ic option Ar option-declaration ; The .Ic option statement is used to specify the value of an option supplied by the server, or, in the case of predefined leases declared in .Nm , the value that the user wishes the client configuration script to use if the predefined lease is used. .It Ic script Qq Ar script-name ; The .Ic script statement is used to specify the pathname of the DHCP client configuration script. This script is used by the DHCP client to set each interface's initial configuration prior to requesting an address, to test the address once it has been offered, and to set the interface's final configuration once a lease has been acquired. If no lease is acquired, the script is used to test predefined leases, if any, and also called once if no valid lease can be identified. For more information, see .Xr dhclient.leases 5 . .It Ic medium Qq Ar "media setup" ; The .Ic medium statement can be used on systems where network interfaces cannot automatically determine the type of network to which they are connected. The .Ar "media setup" string is a system-dependent parameter which is passed to the DHCP client configuration script when initializing the interface. On .Ux and .Ux Ns -like systems, the argument is passed on the .Xr ifconfig 8 command line when configuring the interface. .Pp The DHCP client automatically declares this parameter if it used a media type (see the .Ic media statement) when configuring the interface in order to obtain a lease. This statement should be used in predefined leases only if the network interface requires media type configuration. .It Ic renew Ar date ; .It Ic rebind Ar date ; .It Ic expire Ar date ; The .Ic renew statement defines the time at which the DHCP client should begin trying to contact its server to renew a lease that it is using. The .Ic rebind statement defines the time at which the DHCP client should begin to try to contact .Em any DHCP server in order to renew its lease. The .Ic expire statement defines the time at which the DHCP client must stop using a lease if it has not been able to contact a server in order to renew it. .El .Pp These declarations are automatically set in leases acquired by the DHCP client, but must also be configured in predefined leases - a predefined lease whose expiry time has passed will not be used by the DHCP client. .Pp Dates are specified as follows: .Bd -ragged -offset indent .Ar .Sm off .Ar No / Ar No / Ar .Ar : : .Sm on .Ed .Pp The weekday is present to make it easy for a human to tell when a lease expires - it is specified as a number from zero to six, with zero being Sunday. When declaring a predefined lease, it can always be specified as zero. The year is specified with the century, so it should generally be four digits except for really long leases. The month is specified as a number starting with 1 for January. The day of the month is likewise specified starting with 1. The hour is a number between 0 and 23, the minute a number between 0 and 59, and the second also a number between 0 and 59. .Sh ALIAS DECLARATIONS .Ic alias No { Ar declarations ... No } .Pp Some DHCP clients running TCP/IP roaming protocols may require that in addition to the lease they may acquire via DHCP, their interface also be configured with a predefined IP alias so that they can have a permanent IP address even while roaming. The Internet Software Consortium DHCP client does not support roaming with fixed addresses directly, but in order to facilitate such experimentation, the DHCP client can be set up to configure an IP alias using the .Ic alias declaration. .Pp The .Ic alias declaration resembles a lease declaration, except that options other than the subnet-mask option are ignored by the standard client configuration script, and expiry times are ignored. A typical alias declaration includes an interface declaration, a fixed-address declaration for the IP alias address, and a subnet-mask option declaration. A medium statement should never be included in an alias declaration. .Sh OTHER DECLARATIONS .Bl -tag -width indent .It Ic reject Ar ip-address ; The .Ic reject statement causes the DHCP client to reject offers from servers who use the specified address as a server identifier. This can be used to avoid being configured by rogue or misconfigured DHCP servers, although it should be a last resort - better to track down the bad DHCP server and fix it. .It Ic interface Qo Ar name Qc { Ar declarations ... No } A client with more than one network interface may require different behaviour depending on which interface is being configured. All timing parameters and declarations other than lease and alias declarations can be enclosed in an interface declaration, and those parameters will then be used only for the interface that matches the specified name. Interfaces for which there is no interface declaration will use the parameters declared outside of any interface declaration, or the default settings. .It Ic media Qo Ar "media setup" Qc Oo , Qo Ar "media setup" Qc , Ar ... Oc ; The .Ic media statement defines one or more media configuration parameters which may be tried while attempting to acquire an IP address. The DHCP client will cycle through each media setup string on the list, configuring the interface using that setup and attempting to boot, and then trying the next one. This can be used for network interfaces which are not capable of sensing the media type unaided - whichever media type succeeds in getting a request to the server and hearing the reply is probably right (no guarantees). .Pp The media setup is only used for the initial phase of address acquisition (the DHCPDISCOVER and DHCPOFFER packets). Once an address has been acquired, the DHCP client will record it in its lease database and will record the media type used to acquire the address. Whenever the client tries to renew the lease, it will use that same media type. The lease must expire before the client will go back to cycling through media types. .El .Sh EXAMPLES The following configuration file is used on a laptop which has an IP alias of .Li 192.5.5.213 , and has one interface, .Li ep0 (a 3Com 3C589C). Booting intervals have been shortened somewhat from the default, because the client is known to spend most of its time on networks with little DHCP activity. The laptop does roam to multiple networks. .Bd -literal -offset indent timeout 60; retry 60; reboot 10; select-timeout 5; initial-interval 2; reject 192.33.137.209; interface "ep0" { send host-name "andare.fugue.com"; send dhcp-client-identifier 1:0:a0:24:ab:fb:9c; send dhcp-lease-time 3600; supersede domain-name "fugue.com rc.vix.com home.vix.com"; prepend domain-name-servers 127.0.0.1; request subnet-mask, broadcast-address, time-offset, routers, domain-name, domain-name-servers, host-name; require subnet-mask, domain-name-servers; script "/etc/dhclient-script"; media "media 10baseT/UTP", "media 10base2/BNC"; } alias { interface "ep0"; fixed-address 192.5.5.213; option subnet-mask 255.255.255.255; } .Ed .Pp This is a very complicated .Nm file - in general, yours should be much simpler. In many cases, it is sufficient to just create an empty .Nm file - the defaults are usually fine. .Sh SEE ALSO .Xr dhclient.leases 5 , .Xr dhcp-options 5 , .Xr dhcpd.conf 5 , .Xr dhclient 8 , .Xr dhcpd 8 .Rs .%R "RFC 2132, RFC 2131" .Re .Sh AUTHORS .An -nosplit The .Xr dhclient 8 utility was written by .An Ted Lemon Aq Mt mellon@vix.com under a contract with Vixie Labs. .Pp The current implementation was reworked by .An Henning Brauer Aq Mt henning@openbsd.org .