.\" $FreeBSD$ .Dd February 28, 2003 .Dt NATD 8 .Os .Sh NAME .Nm natd .Nd Network Address Translation daemon .Sh SYNOPSIS .Nm .Bk -words .Op Fl unregistered_only | u .Op Fl log | l .Op Fl proxy_only .Op Fl reverse .Op Fl deny_incoming | d .Op Fl use_sockets | s .Op Fl same_ports | m .Op Fl verbose | v .Op Fl dynamic .Op Fl in_port | i Ar port .Op Fl out_port | o Ar port .Op Fl port | p Ar port .Op Fl alias_address | a Ar address .Op Fl target_address | t Ar address .Op Fl interface | n Ar interface .Op Fl proxy_rule Ar proxyspec .Op Fl redirect_port Ar linkspec .Op Fl redirect_proto Ar linkspec .Op Fl redirect_address Ar linkspec .Op Fl config | f Ar configfile .Op Fl log_denied .Op Fl log_facility Ar facility_name .Op Fl punch_fw Ar firewall_range .Op Fl skinny_port Ar port .Op Fl log_ipfw_denied .Op Fl pid_file | P Ar pidfile .Ek .Sh DESCRIPTION The .Nm utility provides a Network Address Translation facility for use with .Xr divert 4 sockets under .Fx . .Pp (If you need NAT on a PPP link, .Xr ppp 8 provides the .Fl nat option that gives most of the .Nm functionality, and uses the same .Xr libalias 3 library.) .Pp The .Nm utility normally runs in the background as a daemon. It is passed raw IP packets as they travel into and out of the machine, and will possibly change these before re-injecting them back into the IP packet stream. .Pp It changes all packets destined for another host so that their source IP address is that of the current machine. For each packet changed in this manner, an internal table entry is created to record this fact. The source port number is also changed to indicate the table entry applying to the packet. Packets that are received with a target IP of the current host are checked against this internal table. If an entry is found, it is used to determine the correct target IP address and port to place in the packet. .Pp The following command line options are available: .Bl -tag -width Fl .It Fl log | l Log various aliasing statistics and information to the file .Pa /var/log/alias.log . This file is truncated each time .Nm is started. .It Fl deny_incoming | d Do not pass incoming packets that have no entry in the internal translation table. .Pp If this option is not used, then such a packet will be altered using the rules in .Fl target_address below, and the entry will be made in the internal translation table. .It Fl log_denied Log denied incoming packets via .Xr syslog 3 (see also .Fl log_facility ) . .It Fl log_facility Ar facility_name Use specified log facility when logging information via .Xr syslog 3 . Argument .Ar facility_name is one of the keywords specified in .Xr syslog.conf 5 . .It Fl use_sockets | s Allocate a .Xr socket 2 in order to establish an FTP data or IRC DCC send connection. This option uses more system resources, but guarantees successful connections when port numbers conflict. .It Fl same_ports | m Try to keep the same port number when altering outgoing packets. With this option, protocols such as RPC will have a better chance of working. If it is not possible to maintain the port number, it will be silently changed as per normal. .It Fl verbose | v Do not call .Xr daemon 3 on startup. Instead, stay attached to the controlling terminal and display all packet alterations to the standard output. This option should only be used for debugging purposes. .It Fl unregistered_only | u Only alter outgoing packets with an .Em unregistered source address. According to RFC 1918, unregistered source addresses are 10.0.0.0/8, 172.16.0.0/12 and 192.168.0.0/16. .It Fl redirect_port Ar proto Xo .Ar targetIP Ns : Ns Xo .Ar targetPORT Ns Op - Ns Ar targetPORT Xc .Op Ar aliasIP Ns : Ns Xo .Ar aliasPORT Ns Op - Ns Ar aliasPORT Xc .Oo Ar remoteIP Ns Oo : Ns .Ar remotePORT Ns Op - Ns Ar remotePORT .Oc Oc .Xc Redirect incoming connections arriving to given port(s) to another host and port(s). Argument .Ar proto is either .Ar tcp or .Ar udp , .Ar targetIP is the desired target IP address, .Ar targetPORT is the desired target port number or range, .Ar aliasPORT is the requested port number or range, and .Ar aliasIP is the aliasing address. Arguments .Ar remoteIP and .Ar remotePORT can be used to specify the connection more accurately if necessary. If .Ar remotePORT is not specified, it is assumed to be all ports. .Pp Arguments .Ar targetIP , aliasIP and .Ar remoteIP can be given as IP addresses or as hostnames. The .Ar targetPORT , aliasPORT and .Ar remotePORT ranges need not be the same numerically, but must have the same size. When .Ar targetPORT , aliasPORT or .Ar remotePORT specifies a singular value (not a range), it can be given as a service name that is searched for in the .Xr services 5 database. .Pp For example, the argument .Pp .Dl Ar tcp inside1:telnet 6666 .Pp means that incoming TCP packets destined for port 6666 on this machine will be sent to the telnet port on the inside1 machine. .Pp .Dl Ar tcp inside2:2300-2399 3300-3399 .Pp will redirect incoming connections on ports 3300-3399 to host inside2, ports 2300-2399. The mapping is 1:1 meaning port 3300 maps to 2300, 3301 maps to 2301, etc. .It Fl redirect_proto Ar proto localIP Oo .Ar publicIP Op Ar remoteIP .Oc Redirect incoming IP packets of protocol .Ar proto (see .Xr protocols 5 ) destined for .Ar publicIP address to a .Ar localIP address and vice versa. .Pp If .Ar publicIP is not specified, then the default aliasing address is used. If .Ar remoteIP is specified, then only packets coming from/to .Ar remoteIP will match the rule. .It Fl redirect_address Ar localIP publicIP Redirect traffic for public IP address to a machine on the local network. This function is known as .Em static NAT . Normally static NAT is useful if your ISP has allocated a small block of IP addresses to you, but it can even be used in the case of single address: .Pp .Dl Ar redirect_address 10.0.0.8 0.0.0.0 .Pp The above command would redirect all incoming traffic to machine 10.0.0.8. .Pp If several address aliases specify the same public address as follows .Bd -literal -offset indent redirect_address 192.168.0.2 public_addr redirect_address 192.168.0.3 public_addr redirect_address 192.168.0.4 public_addr .Ed .Pp the incoming traffic will be directed to the last translated local address (192.168.0.4), but outgoing traffic from the first two addresses will still be aliased to appear from the specified .Ar public_addr . .It Fl redirect_port Ar proto Xo .Ar targetIP Ns : Ns Xo .Ar targetPORT Ns Oo , Ns .Ar targetIP Ns : Ns Xo .Ar targetPORT Ns Oo , Ns .Ar ...\& .Oc Oc .Xc .Xc .Op Ar aliasIP Ns : Ns Xo .Ar aliasPORT .Xc .Oo Ar remoteIP Ns .Op : Ns Ar remotePORT .Oc .Xc .It Fl redirect_address Xo .Ar localIP Ns Oo , Ns .Ar localIP Ns Oo , Ns .Ar ...\& .Oc Oc .Ar publicIP .Xc These forms of .Fl redirect_port and .Fl redirect_address are used to transparently offload network load on a single server and distribute the load across a pool of servers. This function is known as .Em LSNAT (RFC 2391). For example, the argument .Pp .Dl Ar tcp www1:http,www2:http,www3:http www:http .Pp means that incoming HTTP requests for host www will be transparently redirected to one of the www1, www2 or www3, where a host is selected simply on a round-robin basis, without regard to load on the net. .It Fl dynamic If the .Fl n or .Fl interface option is used, .Nm will monitor the routing socket for alterations to the .Ar interface passed. If the interface's IP address is changed, .Nm will dynamically alter its concept of the alias address. .It Fl in_port | i Ar port Read from and write to .Xr divert 4 port .Ar port , treating all packets as .Dq incoming . .It Fl out_port | o Ar port Read from and write to .Xr divert 4 port .Ar port , treating all packets as .Dq outgoing . .It Fl port | p Ar port Read from and write to .Xr divert 4 port .Ar port , distinguishing packets as .Dq incoming or .Dq outgoing using the rules specified in .Xr divert 4 . If .Ar port is not numeric, it is searched for in the .Xr services 5 database. If this option is not specified, the divert port named .Ar natd will be used as a default. .It Fl alias_address | a Ar address Use .Ar address as the aliasing address. Either this or the .Fl interface option must be used (but not both), if the .Fl proxy_only option is not specified. The specified address is usually the address assigned to the .Dq public network interface. .Pp All data passing .Em out will be rewritten with a source address equal to .Ar address . All data coming .Em in will be checked to see if it matches any already-aliased outgoing connection. If it does, the packet is altered accordingly. If not, all .Fl redirect_port , .Fl redirect_proto and .Fl redirect_address assignments are checked and actioned. If no other action can be made and if .Fl deny_incoming is not specified, the packet is delivered to the local machine using the rules specified in .Fl target_address option below. .It Fl t | target_address Ar address Set the target address. When an incoming packet not associated with any pre-existing link arrives at the host machine, it will be sent to the specified .Ar address . .Pp The target address may be set to .Ar 255.255.255.255 , in which case all new incoming packets go to the alias address set by .Fl alias_address or .Fl interface . .Pp If this option is not used, or called with the argument .Ar 0.0.0.0 , then all new incoming packets go to the address specified in the packet. This allows external machines to talk directly to internal machines if they can route packets to the machine in question. .It Fl interface | n Ar interface Use .Ar interface to determine the aliasing address. If there is a possibility that the IP address associated with .Ar interface may change, the .Fl dynamic option should also be used. If this option is not specified, the .Fl alias_address option must be used. .Pp The specified .Ar interface is usually the .Dq public (or .Dq external ) network interface. .It Fl config | f Ar file Read configuration from .Ar file . A .Ar file should contain a list of options, one per line, in the same form as the long form of the above command line options. For example, the line .Pp .Dl alias_address 158.152.17.1 .Pp would specify an alias address of 158.152.17.1. Options that do not take an argument are specified with an argument of .Ar yes or .Ar no in the configuration file. For example, the line .Pp .Dl log yes .Pp is synonymous with .Fl log . .Pp Trailing spaces and empty lines are ignored. A .Ql \&# sign will mark the rest of the line as a comment. .It Fl reverse This option makes .Nm reverse the way it handles .Dq incoming and .Dq outgoing packets, allowing it to operate on the .Dq internal network interface rather than the .Dq external one. .Pp This can be useful in some transparent proxying situations when outgoing traffic is redirected to the local machine and .Nm is running on the internal interface (it usually runs on the external interface). .It Fl proxy_only Force .Nm to perform transparent proxying only. Normal address translation is not performed. .It Fl proxy_rule Xo .Op Ar type encode_ip_hdr | encode_tcp_stream .Ar port xxxx .Ar server a.b.c.d:yyyy .Xc Enable transparent proxying. Outgoing TCP packets with the given port going through this host to any other host are redirected to the given server and port. Optionally, the original target address can be encoded into the packet. Use .Ar encode_ip_hdr to put this information into the IP option field or .Ar encode_tcp_stream to inject the data into the beginning of the TCP stream. .It Fl punch_fw Xo .Ar basenumber Ns : Ns Ar count .Xc This option directs .Nm to .Dq punch holes in an .Xr ipfirewall 4 based firewall for FTP/IRC DCC connections. This is done dynamically by installing temporary firewall rules which allow a particular connection (and only that connection) to go through the firewall. The rules are removed once the corresponding connection terminates. .Pp A maximum of .Ar count rules starting from the rule number .Ar basenumber will be used for punching firewall holes. The range will be cleared for all rules on startup. .It Fl skinny_port Ar port This option allows you to specify the TCP port used for the Skinny Station protocol. Skinny is used by Cisco IP phones to communicate with Cisco Call Managers to set up voice over IP calls. By default, Skinny aliasing is not performed. The typical port value for Skinny is 2000. .It Fl log_ipfw_denied Log when a packet cannot be re-injected because an .Xr ipfw 8 rule blocks it. This is the default with .Fl verbose . .It Fl pid_file | P Ar file Specify an alternate file in which to store the process ID. The default is .Pa /var/run/natd.pid . .El .Sh RUNNING NATD The following steps are necessary before attempting to run .Nm : .Bl -enum .It Build a custom kernel with the following options: .Bd -literal -offset indent options IPFIREWALL options IPDIVERT .Ed .Pp Refer to the handbook for detailed instructions on building a custom kernel. .It Ensure that your machine is acting as a gateway. This can be done by specifying the line .Pp .Dl gateway_enable=YES .Pp in the .Pa /etc/rc.conf file or using the command .Pp .Dl "sysctl net.inet.ip.forwarding=1" .Pp .It If you use the .Fl interface option, make sure that your interface is already configured. If, for example, you wish to specify .Ql tun0 as your .Ar interface , and you are using .Xr ppp 8 on that interface, you must make sure that you start .Nm ppp prior to starting .Nm . .El .Pp Running .Nm is fairly straight forward. The line .Pp .Dl natd -interface ed0 .Pp should suffice in most cases (substituting the correct interface name). Please check .Xr rc.conf 5 on how to configure it to be started automatically during boot. Once .Nm is running, you must ensure that traffic is diverted to .Nm : .Bl -enum .It You will need to adjust the .Pa /etc/rc.firewall script to taste. If you are not interested in having a firewall, the following lines will do: .Bd -literal -offset indent /sbin/ipfw -f flush /sbin/ipfw add divert natd all from any to any via ed0 /sbin/ipfw add pass all from any to any .Ed .Pp The second line depends on your interface (change .Ql ed0 as appropriate). .Pp You should be aware of the fact that, with these firewall settings, everyone on your local network can fake his source-address using your host as gateway. If there are other hosts on your local network, you are strongly encouraged to create firewall rules that only allow traffic to and from trusted hosts. .Pp If you specify real firewall rules, it is best to specify line 2 at the start of the script so that .Nm sees all packets before they are dropped by the firewall. .Pp After translation by .Nm , packets re-enter the firewall at the rule number following the rule number that caused the diversion (not the next rule if there are several at the same number). .It Enable your firewall by setting .Pp .Dl firewall_enable=YES .Pp in .Pa /etc/rc.conf . This tells the system startup scripts to run the .Pa /etc/rc.firewall script. If you do not wish to reboot now, just run this by hand from the console. NEVER run this from a remote session unless you put it into the background. If you do, you will lock yourself out after the flush takes place, and execution of .Pa /etc/rc.firewall will stop at this point - blocking all accesses permanently. Running the script in the background should be enough to prevent this disaster. .El .Sh SEE ALSO .Xr libalias 3 , .Xr divert 4 , .Xr protocols 5 , .Xr rc.conf 5 , .Xr services 5 , .Xr syslog.conf 5 , .Xr ipfw 8 , .Xr ppp 8 .Sh AUTHORS This program is the result of the efforts of many people at different times: .Pp .An Archie Cobbs Aq archie@FreeBSD.org (divert sockets) .An Charles Mott Aq cm@linktel.net (packet aliasing) .An Eivind Eklund Aq perhaps@yes.no (IRC support & misc additions) .An Ari Suutari Aq suutari@iki.fi (natd) .An Dru Nelson Aq dnelson@redwoodsoft.com (early PPTP support) .An Brian Somers Aq brian@awfulhak.org (glue) .An Ruslan Ermilov Aq ru@FreeBSD.org (natd, packet aliasing, glue)