.\" $KAME: setkey.8,v 1.89 2003/09/07 22:17:41 itojun Exp $ .\" .\" Copyright (C) 1995, 1996, 1997, 1998, and 1999 WIDE Project. .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of the project nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" $FreeBSD$ .\" .Dd November 20, 2000 .Dt SETKEY 8 .Os .\" .Sh NAME .Nm setkey .Nd "manually manipulate the IPsec SA/SP database" .\" .Sh SYNOPSIS .Nm .Op Fl v .Fl c .Nm .Op Fl v .Fl f Ar filename .Nm .Op Fl aPlv .Fl D .Nm .Op Fl Pv .Fl F .Nm .Op Fl h .Fl x .\" .Sh DESCRIPTION The .Nm utility adds, updates, dumps, or flushes Security Association Database (SAD) entries as well as Security Policy Database (SPD) entries in the kernel. .Pp The .Nm utility takes a series of operations from the standard input (if invoked with .Fl c ) or the file named .Ar filename (if invoked with .Fl f Ar filename ) . .Bl -tag -width indent .It Fl D Dump the SAD entries. If with .Fl P , the SPD entries are dumped. .It Fl F Flush the SAD entries. If with .Fl P , the SPD entries are flushed. .It Fl a The .Nm utility usually does not display dead SAD entries with .Fl D . If with .Fl a , the dead SAD entries will be displayed as well. A dead SAD entry means that it has been expired but remains in the system because it is referenced by some SPD entries. .It Fl h Add hexadecimal dump on .Fl x mode. .It Fl l Loop forever with short output on .Fl D . .It Fl v Be verbose. The program will dump messages exchanged on .Dv PF_KEY socket, including messages sent from other processes to the kernel. .It Fl x Loop forever and dump all the messages transmitted to .Dv PF_KEY socket. .Fl xx makes each timestamps unformatted. .El .Ss Configuration syntax With .Fl c or .Fl f on the command line, .Nm accepts the following configuration syntax. Lines starting with hash signs .Pq Ql # are treated as comment lines. .Bl -tag -width indent .It Xo .Li add .Op Fl 46n .Ar src Ar dst Ar protocol Ar spi .Op Ar extensions .Ar algorithm ... .Li ; .Xc Add an SAD entry. .Li add can fail with multiple reasons, including when the key length does not match the specified algorithm. .\" .It Xo .Li get .Op Fl 46n .Ar src Ar dst Ar protocol Ar spi .Li ; .Xc Show an SAD entry. .\" .It Xo .Li delete .Op Fl 46n .Ar src Ar dst Ar protocol Ar spi .Li ; .Xc Remove an SAD entry. .\" .It Xo .Li deleteall .Op Fl 46n .Ar src Ar dst Ar protocol .Li ; .Xc Remove all SAD entries that match the specification. .\" .It Xo .Li flush .Op Ar protocol .Li ; .Xc Clear all SAD entries matched by the options. .Fl F on the command line achieves the same functionality. .\" .It Xo .Li dump .Op Ar protocol .Li ; .Xc Dumps all SAD entries matched by the options. .Fl D on the command line achieves the same functionality. .\" .It Xo .Li spdadd .Op Fl 46n .Ar src_range Ar dst_range Ar upperspec Ar policy .Li ; .Xc Add an SPD entry. .\" .It Xo .Li spddelete .Op Fl 46n .Ar src_range Ar dst_range Ar upperspec Fl P Ar direction .Li ; .Xc Delete an SPD entry. .\" .It Xo .Li spdflush .Li ; .Xc Clear all SPD entries. .Fl FP on the command line achieves the same functionality. .\" .It Xo .Li spddump .Li ; .Xc Dumps all SPD entries. .Fl DP on the command line achieves the same functionality. .El .\" .Pp Meta-arguments are as follows: .Pp .Bl -tag -compact -width indent .It Ar src .It Ar dst Source/destination of the secure communication is specified as IPv4/v6 address. The .Nm utility can resolve a FQDN into numeric addresses. If the FQDN resolves into multiple addresses, .Nm will install multiple SAD/SPD entries into the kernel by trying all possible combinations. .Fl 4 , .Fl 6 and .Fl n restricts the address resolution of FQDN in certain ways. .Fl 4 and .Fl 6 restrict results into IPv4/v6 addresses only, respectively. .Fl n avoids FQDN resolution and requires addresses to be numeric addresses. .\" .Pp .It Ar protocol .Ar protocol is one of following: .Bl -tag -width Fl -compact .It Li esp ESP based on rfc2406 .It Li esp-old ESP based on rfc1827 .It Li ah AH based on rfc2402 .It Li ah-old AH based on rfc1826 .It Li ipcomp IPComp .It Li tcp TCP-MD5 based on rfc2385 .El .\" .Pp .It Ar spi Security Parameter Index (SPI) for the SAD and the SPD. .Ar spi must be a decimal number, or a hexadecimal number with .Ql 0x prefix. SPI values between 0 and 255 are reserved for future use by IANA and they cannot be used. TCP-MD5 associations must use 0x1000 and therefore only have per-host granularity at this time. .\" .Pp .It Ar extensions take some of the following: .Bl -tag -width Fl -compact .\" .It Fl m Ar mode Specify a security protocol mode for use. .Ar mode is one of following: .Li transport , tunnel or .Li any . The default value is .Li any . .\" .It Fl r Ar size Specify window size of bytes for replay prevention. .Ar size must be decimal number in 32-bit word. If .Ar size is zero or not specified, replay check does not take place. .\" .It Fl u Ar id Specify the identifier of the policy entry in SPD. See .Ar policy . .\" .It Fl f Ar pad_option defines the content of the ESP padding. .Ar pad_option is one of following: .Bl -tag -width random-pad -compact .It Li zero-pad All of the padding are zero. .It Li random-pad A series of randomized values are set. .It Li seq-pad A series of sequential increasing numbers started from 1 are set. .El .\" .It Fl f Li nocyclic-seq Do not allow cyclic sequence number. .\" .It Fl lh Ar time .It Fl ls Ar time Specify hard/soft life time duration of the SA. .El .\" .Pp .It Ar algorithm .Bl -tag -width Fl -compact .It Fl E Ar ealgo Ar key Specify an encryption algorithm .Ar ealgo for ESP. .It Xo .Fl E Ar ealgo Ar key .Fl A Ar aalgo Ar key .Xc Specify a encryption algorithm .Ar ealgo , as well as a payload authentication algorithm .Ar aalgo , for ESP. .It Fl A Ar aalgo Ar key Specify an authentication algorithm for AH. .It Fl C Ar calgo Op Fl R Specify a compression algorithm for IPComp. If .Fl R is specified, .Ar spi field value will be used as the IPComp CPI (compression parameter index) on wire as is. If .Fl R is not specified, the kernel will use well-known CPI on wire, and .Ar spi field will be used only as an index for kernel internal usage. .El .Pp .Ar key must be double-quoted character string, or a series of hexadecimal digits preceded by .Ql 0x . .Pp Possible values for .Ar ealgo , .Ar aalgo and .Ar calgo are specified in separate section. .\" .Pp .It Ar src_range .It Ar dst_range These are selections of the secure communication specified as IPv4/v6 address or IPv4/v6 address range, and it may accompany TCP/UDP port specification. This takes the following form: .Bd -unfilled .Ar address .Ar address/prefixlen .Ar address[port] .Ar address/prefixlen[port] .Ed .Pp .Ar prefixlen and .Ar port must be decimal number. The square bracket around .Ar port is really necessary. They are not manpage metacharacters. For FQDN resolution, the rules applicable to .Ar src and .Ar dst apply here as well. .\" .Pp .It Ar upperspec Upper-layer protocol to be used. You can use one of words in .Pa /etc/protocols as .Ar upperspec . Or .Li icmp6 , .Li ip4 , and .Li any can be specified. .Li any stands for .Dq any protocol . Also you can use the protocol number. You can specify a type and/or a code of ICMPv6 when upper-layer protocol is ICMPv6. The specification can be placed after .Li icmp6 . A type is separated with a code by single comma. A code must be specified anytime. When a zero is specified, the kernel deals with it as a wildcard. Note that the kernel cannot distinguish a wildcard from that a type of ICMPv6 is zero. For example, the following means the policy does not require IPsec for any inbound Neighbor Solicitation: .Pp .Dl "spdadd ::/0 ::/0 icmp6 135,0 -P in none;" .Pp NOTE: .Ar upperspec does not work against forwarding case at this moment, as it requires extra reassembly at forwarding node (not implemented at this moment). We have many protocols in .Pa /etc/protocols , but protocols except of TCP, UDP and ICMP may not be suitable to use with IPsec. You have to consider and be careful to use them. .\" .Pp .It Ar policy .Ar policy is the one of the following three formats: .Bd -ragged -offset indent .It Fl P Ar direction Li discard .It Fl P Ar direction Li none .It Xo Fl P Ar direction Li ipsec .Ar protocol/mode/src-dst/level Op ... .Xc .Ed .Pp You must specify the direction of its policy as .Ar direction . Either .Li out or .Li in are used. .Li discard means the packet matching indexes will be discarded. .Li none means that IPsec operation will not take place onto the packet. .Li ipsec means that IPsec operation will take place onto the packet. The part of .Ar protocol/mode/src-dst/level specifies the rule how to process the packet. Either .Li ah , .Li esp or .Li ipcomp is to be set as .Ar protocol . .Ar mode is either .Li transport or .Li tunnel . If .Ar mode is .Li tunnel , you must specify the end-points addresses of the SA as .Ar src and .Ar dst with .Sq - between these addresses which is used to specify the SA to use. If .Ar mode is .Li transport , both .Ar src and .Ar dst can be omitted. .Ar level is to be one of the following: .Li default , use , require or .Li unique . If the SA is not available in every level, the kernel will request getting SA to the key exchange daemon. .Li default means the kernel consults to the system wide default against protocol you specified, e.g., .Li esp_trans_deflev sysctl variable, when the kernel processes the packet. .Li use means that the kernel use a SA if it is available, otherwise the kernel keeps normal operation. .Li require means SA is required whenever the kernel sends a packet matched with the policy. .Li unique is the same to require. In addition, it allows the policy to bind with the unique out-bound SA. You just specify the policy level .Li unique , .Xr racoon 8 will configure the SA for the policy. If you configure the SA by manual keying for that policy, you can put the decimal number as the policy identifier after .Li unique separated by colon .Ql :\& like the following; .Li unique:number . In order to bind this policy to the SA, .Li number must be between 1 and 32767. It corresponds to .Ar extensions Fl u of the manual SA configuration. When you want to use SA bundle, you can define multiple rules. For example, if an IP header was followed by AH header followed by ESP header followed by an upper layer protocol header, the rule would be: .Dl esp/transport//require ah/transport//require ; The rule order is very important. .Pp Note that .Dq Li discard and .Dq Li none are not in the syntax described in .Xr ipsec_set_policy 3 . There are little differences in the syntax. See .Xr ipsec_set_policy 3 for detail. .Pp .El .Pp .\" .Sh ALGORITHMS The following list shows the supported algorithms. .Sy protocol and .Sy algorithm are almost orthogonal. Followings are the list of authentication algorithms that can be used as .Ar aalgo in .Fl A Ar aalgo of .Ar protocol parameter: .Pp .Bd -literal -offset indent algorithm keylen (bits) comment hmac-md5 128 ah: rfc2403 128 ah-old: rfc2085 hmac-sha1 160 ah: rfc2404 160 ah-old: 128bit ICV (no document) keyed-md5 128 ah: 96bit ICV (no document) 128 ah-old: rfc1828 keyed-sha1 160 ah: 96bit ICV (no document) 160 ah-old: 128bit ICV (no document) null 0 to 2048 for debugging hmac-sha2-256 256 ah: 96bit ICV (draft-ietf-ipsec-ciph-sha-256-00) 256 ah-old: 128bit ICV (no document) hmac-sha2-384 384 ah: 96bit ICV (no document) 384 ah-old: 128bit ICV (no document) hmac-sha2-512 512 ah: 96bit ICV (no document) 512 ah-old: 128bit ICV (no document) hmac-ripemd160 160 ah: 96bit ICV (RFC2857) ah-old: 128bit ICV (no document) aes-xcbc-mac 128 ah: 96bit ICV (RFC3566) 128 ah-old: 128bit ICV (no document) tcp-md5 8 to 640 tcp: rfc2385 .Ed .Pp Followings are the list of encryption algorithms that can be used as .Ar ealgo in .Fl E Ar ealgo of .Ar protocol parameter: .Pp .Bd -literal -offset indent algorithm keylen (bits) comment des-cbc 64 esp-old: rfc1829, esp: rfc2405 3des-cbc 192 rfc2451 null 0 to 2048 rfc2410 blowfish-cbc 40 to 448 rfc2451 cast128-cbc 40 to 128 rfc2451 des-deriv 64 ipsec-ciph-des-derived-01 3des-deriv 192 no document rijndael-cbc 128/192/256 rfc3602 aes-ctr 160/224/288 draft-ietf-ipsec-ciph-aes-ctr-03 .Ed .Pp Note that the first 128 bits of a key for .Li aes-ctr will be used as AES key, and remaining 32 bits will be used as nonce. .Pp Followings are the list of compression algorithms that can be used as .Ar calgo in .Fl C Ar calgo of .Ar protocol parameter: .Pp .Bd -literal -offset indent algorithm comment deflate rfc2394 .Ed .\" .Sh EXIT STATUS .Ex -std .\" .Sh EXAMPLES .Bd -literal -offset add 3ffe:501:4819::1 3ffe:501:481d::1 esp 123457 -E des-cbc 0x3ffe05014819ffff ; add -6 myhost.example.com yourhost.example.com ah 123456 -A hmac-sha1 "AH SA configuration!" ; add 10.0.11.41 10.0.11.33 esp 0x10001 -E des-cbc 0x3ffe05014819ffff -A hmac-md5 "authentication!!" ; get 3ffe:501:4819::1 3ffe:501:481d::1 ah 123456 ; flush ; dump esp ; spdadd 10.0.11.41/32[21] 10.0.11.33/32[any] any -P out ipsec esp/tunnel/192.168.0.1-192.168.1.2/require ; add 10.1.10.34 10.1.10.36 tcp 0x1000 -A tcp-md5 "TCP-MD5 BGP secret" ; .Ed .\" .Sh SEE ALSO .Xr ipsec_set_policy 3 , .Xr racoon 8 , .Xr sysctl 8 .Rs .%T "Changed manual key configuration for IPsec" .%O "http://www.kame.net/newsletter/19991007/" .%D "October 1999" .Re .\" .Sh HISTORY The .Nm utility first appeared in WIDE Hydrangea IPv6 protocol stack kit. The utility was completely re-designed in June 1998. .\" .Sh BUGS The .Nm utility should report and handle syntax errors better. .Pp For IPsec gateway configuration, .Ar src_range and .Ar dst_range with TCP/UDP port number do not work, as the gateway does not reassemble packets (cannot inspect upper-layer headers).