.\" Copyright (c) 1986, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)3.t 8.1 (Berkeley) 6/8/93 .\" .\" $FreeBSD$ .\" .\".ds RH "Network Library Routines .bp .nr H1 3 .nr H2 0 .bp .LG .B .ce 3. NETWORK LIBRARY ROUTINES .sp 2 .R .NL .PP The discussion in section 2 indicated the possible need to locate and construct network addresses when using the interprocess communication facilities in a distributed environment. To aid in this task a number of routines have been added to the standard C run-time library. In this section we will consider the new routines provided to manipulate network addresses. While the 4.4BSD networking facilities support the Internet protocols and the Xerox NS protocols, most of the routines presented in this section do not apply to the NS domain. Unless otherwise stated, it should be assumed that the routines presented in this section do not apply to the NS domain. .PP Locating a service on a remote host requires many levels of mapping before client and server may communicate. A service is assigned a name which is intended for human consumption; e.g. \*(lqthe \fIlogin server\fP on host monet\*(rq. This name, and the name of the peer host, must then be translated into network \fIaddresses\fP which are not necessarily suitable for human consumption. Finally, the address must then used in locating a physical \fIlocation\fP and \fIroute\fP to the service. The specifics of these three mappings are likely to vary between network architectures. For instance, it is desirable for a network to not require hosts to be named in such a way that their physical location is known by the client host. Instead, underlying services in the network may discover the actual location of the host at the time a client host wishes to communicate. This ability to have hosts named in a location independent manner may induce overhead in connection establishment, as a discovery process must take place, but allows a host to be physically mobile without requiring it to notify its clientele of its current location. .PP Standard routines are provided for: mapping host names to network addresses, network names to network numbers, protocol names to protocol numbers, and service names to port numbers and the appropriate protocol to use in communicating with the server process. The file <\fInetdb.h\fP> must be included when using any of these routines. .NH 2 Host names .PP An Internet host name to address mapping is represented by the \fIhostent\fP structure: .DS .if t .ta 0.6i 1.1i 2.6i struct hostent { char *h_name; /* official name of host */ char **h_aliases; /* alias list */ int h_addrtype; /* host address type (e.g., AF_INET) */ int h_length; /* length of address */ char **h_addr_list; /* list of addresses, null terminated */ }; #define h_addr h_addr_list[0] /* first address, network byte order */ .DE The routine \fIgethostbyname\fP(3N) takes an Internet host name and returns a \fIhostent\fP structure, while the routine \fIgethostbyaddr\fP(3N) maps Internet host addresses into a \fIhostent\fP structure. .PP The official name of the host and its public aliases are returned by these routines, along with the address type (family) and a null terminated list of variable length address. This list of addresses is required because it is possible for a host to have many addresses, all having the same name. The \fIh_addr\fP definition is provided for backward compatibility, and is defined to be the first address in the list of addresses in the \fIhostent\fP structure. .PP The database for these calls is provided either by the file \fI/etc/hosts\fP (\fIhosts\fP\|(5)), or by use of a nameserver, \fInamed\fP\|(8). Because of the differences in these databases and their access protocols, the information returned may differ. When using the host table version of \fIgethostbyname\fP, only one address will be returned, but all listed aliases will be included. The nameserver version may return alternate addresses, but will not provide any aliases other than one given as argument. .PP Unlike Internet names, NS names are always mapped into host addresses by the use of a standard NS \fIClearinghouse service\fP, a distributed name and authentication server. The algorithms for mapping NS names to addresses via a Clearinghouse are rather complicated, and the routines are not part of the standard libraries. The user-contributed Courier (Xerox remote procedure call protocol) compiler contains routines to accomplish this mapping; see the documentation and examples provided therein for more information. It is expected that almost all software that has to communicate using NS will need to use the facilities of the Courier compiler. .PP An NS host address is represented by the following: .DS union ns_host { u_char c_host[6]; u_short s_host[3]; }; union ns_net { u_char c_net[4]; u_short s_net[2]; }; struct ns_addr { union ns_net x_net; union ns_host x_host; u_short x_port; }; .DE The following code fragment inserts a known NS address into a \fIns_addr\fP: .DS #include #include #include ... u_long netnum; struct sockaddr_ns dst; ... bzero((char *)&dst, sizeof(dst)); /* * There is no convenient way to assign a long * integer to a ``union ns_net'' at present; in * the future, something will hopefully be provided, * but this is the portable way to go for now. * The network number below is the one for the NS net * that the desired host (gyre) is on. */ netnum = htonl(2266); dst.sns_addr.x_net = *(union ns_net *) &netnum; dst.sns_family = AF_NS; /* * host 2.7.1.0.2a.18 == "gyre:Computer Science:UofMaryland" */ dst.sns_addr.x_host.c_host[0] = 0x02; dst.sns_addr.x_host.c_host[1] = 0x07; dst.sns_addr.x_host.c_host[2] = 0x01; dst.sns_addr.x_host.c_host[3] = 0x00; dst.sns_addr.x_host.c_host[4] = 0x2a; dst.sns_addr.x_host.c_host[5] = 0x18; dst.sns_addr.x_port = htons(75); .DE .NH 2 Network names .PP As for host names, routines for mapping network names to numbers, and back, are provided. These routines return a \fInetent\fP structure: .DS .DT /* * Assumption here is that a network number * fits in 32 bits -- probably a poor one. */ struct netent { char *n_name; /* official name of net */ char **n_aliases; /* alias list */ int n_addrtype; /* net address type */ int n_net; /* network number, host byte order */ }; .DE The routines \fIgetnetbyname\fP(3N), \fIgetnetbynumber\fP(3N), and \fIgetnetent\fP(3N) are the network counterparts to the host routines described above. The routines extract their information from \fI/etc/networks\fP. .PP NS network numbers are determined either by asking your local Xerox Network Administrator (and hardcoding the information into your code), or by querying the Clearinghouse for addresses. The internetwork router is the only process that needs to manipulate network numbers on a regular basis; if a process wishes to communicate with a machine, it should ask the Clearinghouse for that machine's address (which will include the net number). .NH 2 Protocol names .PP For protocols, which are defined in \fI/etc/protocols\fP, the \fIprotoent\fP structure defines the protocol-name mapping used with the routines \fIgetprotobyname\fP(3N), \fIgetprotobynumber\fP(3N), and \fIgetprotoent\fP(3N): .DS .DT struct protoent { char *p_name; /* official protocol name */ char **p_aliases; /* alias list */ int p_proto; /* protocol number */ }; .DE .PP In the NS domain, protocols are indicated by the "client type" field of an IDP header. No protocol database exists; see section 5 for more information. .NH 2 Service names .PP Information regarding services is a bit more complicated. A service is expected to reside at a specific \*(lqport\*(rq and employ a particular communication protocol. This view is consistent with the Internet domain, but inconsistent with other network architectures. Further, a service may reside on multiple ports. If this occurs, the higher level library routines will have to be bypassed or extended. Services available are contained in the file \fI/etc/services\fP. A service mapping is described by the \fIservent\fP structure, .DS .DT struct servent { char *s_name; /* official service name */ char **s_aliases; /* alias list */ int s_port; /* port number, network byte order */ char *s_proto; /* protocol to use */ }; .DE The routine \fIgetservbyname\fP(3N) maps service names to a servent structure by specifying a service name and, optionally, a qualifying protocol. Thus the call .DS sp = getservbyname("telnet", (char *) 0); .DE returns the service specification for a telnet server using any protocol, while the call .DS sp = getservbyname("telnet", "tcp"); .DE returns only that telnet server which uses the TCP protocol. The routines \fIgetservbyport\fP(3N) and \fIgetservent\fP(3N) are also provided. The \fIgetservbyport\fP routine has an interface similar to that provided by \fIgetservbyname\fP; an optional protocol name may be specified to qualify lookups. .PP In the NS domain, services are handled by a central dispatcher provided as part of the Courier remote procedure call facilities. Again, the reader is referred to the Courier compiler documentation and to the Xerox standard* .FS * \fICourier: The Remote Procedure Call Protocol\fP, XSIS 038112. .FE for further details. .NH 2 Miscellaneous .PP With the support routines described above, an Internet application program should rarely have to deal directly with addresses. This allows services to be developed as much as possible in a network independent fashion. It is clear, however, that purging all network dependencies is very difficult. So long as the user is required to supply network addresses when naming services and sockets there will always some network dependency in a program. For example, the normal code included in client programs, such as the remote login program, is of the form shown in Figure 1. (This example will be considered in more detail in section 4.) .PP If we wanted to make the remote login program independent of the Internet protocols and addressing scheme we would be forced to add a layer of routines which masked the network dependent aspects from the mainstream login code. For the current facilities available in the system this does not appear to be worthwhile. .PP Aside from the address-related data base routines, there are several other routines available in the run-time library which are of interest to users. These are intended mostly to simplify manipulation of names and addresses. Table 1 summarizes the routines for manipulating variable length byte strings and handling byte swapping of network addresses and values. .KF .DS B .TS box; l | l l | l. Call Synopsis _ bcmp(s1, s2, n) compare byte-strings; 0 if same, not 0 otherwise bcopy(s1, s2, n) copy n bytes from s1 to s2 bzero(base, n) zero-fill n bytes starting at base htonl(val) convert 32-bit quantity from host to network byte order htons(val) convert 16-bit quantity from host to network byte order ntohl(val) convert 32-bit quantity from network to host byte order ntohs(val) convert 16-bit quantity from network to host byte order .TE .DE .ce Table 1. C run-time routines. .KE .PP The byte swapping routines are provided because the operating system expects addresses to be supplied in network order (aka ``big-endian'' order). On ``little-endian'' architectures, such as Intel x86 and VAX, host byte ordering is different than network byte ordering. Consequently, programs are sometimes required to byte swap quantities. The library routines which return network addresses provide them in network order so that they may simply be copied into the structures provided to the system. This implies users should encounter the byte swapping problem only when \fIinterpreting\fP network addresses. For example, if an Internet port is to be printed out the following code would be required: .DS printf("port number %d\en", ntohs(sp->s_port)); .DE On machines where unneeded these routines are defined as null macros. .DS .if t .ta .5i 1.0i 1.5i 2.0i .if n .ta .7i 1.4i 2.1i 2.8i #include #include #include #include #include ... main(argc, argv) int argc; char *argv[]; { struct sockaddr_in server; struct servent *sp; struct hostent *hp; int s; ... sp = getservbyname("login", "tcp"); if (sp == NULL) { fprintf(stderr, "rlogin: login/tcp: unknown service\en"); exit(1); } hp = gethostbyname(argv[1]); if (hp == NULL) { fprintf(stderr, "rlogin: %s: unknown host\en", argv[1]); exit(2); } bzero((char *)&server, sizeof (server)); bcopy(hp->h_addr, (char *)&server.sin_addr, hp->h_length); server.sin_family = hp->h_addrtype; server.sin_port = sp->s_port; s = socket(AF_INET, SOCK_STREAM, 0); if (s < 0) { perror("rlogin: socket"); exit(3); } ... /* Connect does the bind() for us */ if (connect(s, (char *)&server, sizeof (server)) < 0) { perror("rlogin: connect"); exit(5); } ... } .DE .ce Figure 1. Remote login client code.