/*- * Copyright (c) 2013 Alexander Fedorov * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _A10_MMC_H_ #define _A10_MMC_H_ #define A10_MMC_GCTL 0x00 /* Control Register */ #define A10_MMC_CKCR 0x04 /* Clock Control Register */ #define A10_MMC_TMOR 0x08 /* Timeout Register */ #define A10_MMC_BWDR 0x0C /* Bus Width Register */ #define A10_MMC_BKSR 0x10 /* Block Size Register */ #define A10_MMC_BYCR 0x14 /* Byte Count Register */ #define A10_MMC_CMDR 0x18 /* Command Register */ #define A10_MMC_CAGR 0x1C /* Argument Register */ #define A10_MMC_RESP0 0x20 /* Response Register 0 */ #define A10_MMC_RESP1 0x24 /* Response Register 1 */ #define A10_MMC_RESP2 0x28 /* Response Register 2 */ #define A10_MMC_RESP3 0x2C /* Response Register 3 */ #define A10_MMC_IMKR 0x30 /* Interrupt Mask Register */ #define A10_MMC_MISR 0x34 /* Masked Interrupt Status Register */ #define A10_MMC_RISR 0x38 /* Raw Interrupt Status Register */ #define A10_MMC_STAR 0x3C /* Status Register */ #define A10_MMC_FWLR 0x40 /* FIFO Threshold Watermark Register */ #define A10_MMC_FUNS 0x44 /* Function Select Register */ #define A10_MMC_HWRST 0x78 /* Hardware reset (not documented) */ #define A10_MMC_DMAC 0x80 /* IDMAC Control Register */ #define A10_MMC_DLBA 0x84 /* IDMAC Desc List Base Address Reg */ #define A10_MMC_IDST 0x88 /* IDMAC Status Register */ #define A10_MMC_IDIE 0x8C /* IDMAC Interrupt Enable Register */ #define A10_MMC_FIFO 0x100 /* FIFO Access Address (A10/A20) */ #define A31_MMC_FIFO 0x200 /* FIFO Access Address (A31) */ /* A10_MMC_GCTL */ #define A10_MMC_CTRL_SOFT_RST (1U << 0) #define A10_MMC_CTRL_FIFO_RST (1U << 1) #define A10_MMC_CTRL_DMA_RST (1U << 2) #define A10_MMC_CTRL_INT_ENB (1U << 4) #define A10_MMC_CTRL_DMA_ENB (1U << 5) #define A10_MMC_CTRL_CD_DBC_ENB (1U << 8) #define A10_MMC_CTRL_DDR_MOD_SEL (1U << 10) #define A10_MMC_CTRL_FIFO_AC_MOD (1U << 31) #define A10_MMC_RESET \ (A10_MMC_CTRL_SOFT_RST | A10_MMC_CTRL_FIFO_RST | A10_MMC_CTRL_DMA_RST) /* A10_MMC_CKCR */ #define A10_MMC_CKCR_CCLK_ENB (1U << 16) #define A10_MMC_CKCR_CCLK_CTRL (1U << 17) #define A10_MMC_CKCR_CCLK_DIV 0xff /* A10_MMC_TMOR */ #define A10_MMC_TMOR_RTO_LMT_SHIFT(x) x /* Response timeout limit */ #define A10_MMC_TMOR_RTO_LMT_MASK 0xff #define A10_MMC_TMOR_DTO_LMT_SHIFT(x) (x << 8) /* Data timeout limit */ #define A10_MMC_TMOR_DTO_LMT_MASK 0xffffff /* A10_MMC_BWDR */ #define A10_MMC_BWDR1 0 #define A10_MMC_BWDR4 1 #define A10_MMC_BWDR8 2 /* A10_MMC_CMDR */ #define A10_MMC_CMDR_RESP_RCV (1U << 6) #define A10_MMC_CMDR_LONG_RESP (1U << 7) #define A10_MMC_CMDR_CHK_RESP_CRC (1U << 8) #define A10_MMC_CMDR_DATA_TRANS (1U << 9) #define A10_MMC_CMDR_DIR_WRITE (1U << 10) #define A10_MMC_CMDR_TRANS_MODE_STREAM (1U << 11) #define A10_MMC_CMDR_STOP_CMD_FLAG (1U << 12) #define A10_MMC_CMDR_WAIT_PRE_OVER (1U << 13) #define A10_MMC_CMDR_STOP_ABT_CMD (1U << 14) #define A10_MMC_CMDR_SEND_INIT_SEQ (1U << 15) #define A10_MMC_CMDR_PRG_CLK (1U << 21) #define A10_MMC_CMDR_RD_CEDATA_DEV (1U << 22) #define A10_MMC_CMDR_CCS_EXP (1U << 23) #define A10_MMC_CMDR_BOOT_MOD_SHIFT 24 #define A10_MMC_CMDR_BOOT_MOD_NORMAL 0 #define A10_MMC_CMDR_BOOT_MOD_MANDATORY 1 #define A10_MMC_CMDR_BOOT_MOD_ALT 2 #define A10_MMC_CMDR_EXP_BOOT_ACK (1U << 26) #define A10_MMC_CMDR_BOOT_ABT (1U << 27) #define A10_MMC_CMDR_VOL_SW (1U << 28) #define A10_MMC_CMDR_LOAD (1U << 31) /* A10_MMC_IMKR and A10_MMC_RISR */ #define A10_MMC_INT_RESP_ERR (1U << 1) #define A10_MMC_INT_CMD_DONE (1U << 2) #define A10_MMC_INT_DATA_OVER (1U << 3) #define A10_MMC_INT_TX_DATA_REQ (1U << 4) #define A10_MMC_INT_RX_DATA_REQ (1U << 5) #define A10_MMC_INT_RESP_CRC_ERR (1U << 6) #define A10_MMC_INT_DATA_CRC_ERR (1U << 7) #define A10_MMC_INT_RESP_TIMEOUT (1U << 8) #define A10_MMC_INT_BOOT_ACK_RECV (1U << 8) #define A10_MMC_INT_DATA_TIMEOUT (1U << 9) #define A10_MMC_INT_BOOT_START (1U << 9) #define A10_MMC_INT_DATA_STARVE (1U << 10) #define A10_MMC_INT_VOL_CHG_DONE (1U << 10) #define A10_MMC_INT_FIFO_RUN_ERR (1U << 11) #define A10_MMC_INT_CMD_BUSY (1U << 12) #define A10_MMC_INT_DATA_START_ERR (1U << 13) #define A10_MMC_INT_AUTO_STOP_DONE (1U << 14) #define A10_MMC_INT_DATA_END_BIT_ERR (1U << 15) #define A10_MMC_INT_SDIO (1U << 16) #define A10_MMC_INT_CARD_INSERT (1U << 30) #define A10_MMC_INT_CARD_REMOVE (1U << 31) #define A10_MMC_INT_ERR_BIT \ (A10_MMC_INT_RESP_ERR | A10_MMC_INT_RESP_CRC_ERR | \ A10_MMC_INT_DATA_CRC_ERR | A10_MMC_INT_RESP_TIMEOUT | \ A10_MMC_INT_FIFO_RUN_ERR | A10_MMC_INT_CMD_BUSY | \ A10_MMC_INT_DATA_START_ERR | A10_MMC_INT_DATA_END_BIT_ERR) /* A10_MMC_STAR */ #define A10_MMC_STAR_FIFO_RX_LEVEL (1U << 0) #define A10_MMC_STAR_FIFO_TX_LEVEL (1U << 1) #define A10_MMC_STAR_FIFO_EMPTY (1U << 2) #define A10_MMC_STAR_FIFO_FULL (1U << 3) #define A10_MMC_STAR_CARD_PRESENT (1U << 8) #define A10_MMC_STAR_CARD_BUSY (1U << 9) #define A10_MMC_STAR_FSM_BUSY (1U << 10) #define A10_MMC_STAR_DMA_REQ (1U << 31) /* A10_MMC_FUNS */ #define A10_MMC_CE_ATA_ON (0xceaaU << 16) #define A10_MMC_SEND_IRQ_RESP (1U << 0) #define A10_MMC_SDIO_RD_WAIT (1U << 1) #define A10_MMC_ABT_RD_DATA (1U << 2) #define A10_MMC_SEND_CC_SD (1U << 8) #define A10_MMC_SEND_AUTOSTOP_CC_SD (1U << 9) #define A10_MMC_CE_ATA_DEV_INT_ENB (1U << 10) /* IDMA CONTROLLER BUS MOD BIT FIELD */ #define A10_MMC_DMAC_IDMAC_SOFT_RST (1U << 0) #define A10_MMC_DMAC_IDMAC_FIX_BURST (1U << 1) #define A10_MMC_DMAC_IDMAC_IDMA_ON (1U << 7) #define A10_MMC_DMAC_IDMAC_REFETCH_DES (1U << 31) /* A10_MMC_IDST */ #define A10_MMC_IDST_TX_INT (1U << 0) #define A10_MMC_IDST_RX_INT (1U << 1) #define A10_MMC_IDST_FATAL_BERR_INT (1U << 2) #define A10_MMC_IDST_DES_UNAVL_INT (1U << 4) #define A10_MMC_IDST_ERR_FLAG_SUM (1U << 5) #define A10_MMC_IDST_NOR_INT_SUM (1U << 8) #define A10_MMC_IDST_ABN_INT_SUM (1U << 9) #define A10_MMC_IDST_HOST_ABT_INTX (1U << 10) #define A10_MMC_IDST_HOST_ABT_INRX (1U << 10) #define A10_MMC_IDST_IDLE (0U << 13) #define A10_MMC_IDST_SUSPEND (1U << 13) #define A10_MMC_IDST_DESC_RD (2U << 13) #define A10_MMC_IDST_DESC_CHECK (3U << 13) #define A10_MMC_IDST_RD_REQ_WAIT (4U << 13) #define A10_MMC_IDST_WR_REQ_WAIT (5U << 13) #define A10_MMC_IDST_RD (6U << 13) #define A10_MMC_IDST_WR (7U << 13) #define A10_MMC_IDST_DESC_CLOSE (8U << 13) #define A10_MMC_IDST_ERROR \ (A10_MMC_IDST_FATAL_BERR_INT | A10_MMC_IDST_ERR_FLAG_SUM | \ A10_MMC_IDST_DES_UNAVL_INT | A10_MMC_IDST_ABN_INT_SUM) #define A10_MMC_IDST_COMPLETE \ (A10_MMC_IDST_TX_INT | A10_MMC_IDST_RX_INT) /* The DMA descriptor table. */ struct a10_mmc_dma_desc { uint32_t config; #define A10_MMC_DMA_CONFIG_DIC (1U << 1) /* Disable Interrupt Completion */ #define A10_MMC_DMA_CONFIG_LD (1U << 2) /* Last DES */ #define A10_MMC_DMA_CONFIG_FD (1U << 3) /* First DES */ #define A10_MMC_DMA_CONFIG_CH (1U << 4) /* CHAIN MOD */ #define A10_MMC_DMA_CONFIG_ER (1U << 5) /* End of Ring (undocumented register) */ #define A10_MMC_DMA_CONFIG_CES (1U << 30) /* Card Error Summary */ #define A10_MMC_DMA_CONFIG_OWN (1U << 31) /* DES Own Flag */ uint32_t buf_size; uint32_t buf_addr; uint32_t next; }; #define A10_MMC_DMA_ALIGN 4 #endif /* _A10_MMC_H_ */