# Kernel config for GlobalScale Technologies DreamPlug version 1001. # # This is for units that are version 10, revision 01, with NOR SPI flash. # These units are identified with the number "1001" on the S/N label. # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ # #NO_UNIVERSE ident DREAMPLUG-1001 include "std.arm" include "../mv/kirkwood/std.db88f6xxx" options SOC_MV_KIRKWOOD options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 filesystem options NULLFS # NULL filesystem options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization options GEOM_ELI # Disk encryption options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options ALT_BREAK_TO_DEBUGGER options KDB # Enable kernel debugger support options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options WITNESS_KDB #options DIAGNOSTIC # Enable these options for nfs root configured via BOOTP. #options BOOTP #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=mge0 # If not using BOOTP, use something like one of these... #options ROOTDEVNAME=\"ufs:/dev/da1a\" options ROOTDEVNAME=\"ufs:/dev/da1s1a\" #options ROOTDEVNAME=\"ufs:/dev/da1p10\" #options ROOTDEVNAME=\"nfs:192.168.0.254/dreamplug\" # Misc pseudo devices device bpf # Required for DHCP device firmware # firmware(9) required for USB wlan device gif # IPv6 and IPv4 tunneling device loop # Network loopback device md # Memory/malloc disk device pty # BSD-style compatibility pseudo ttys device random # Entropy device device tun # Packet tunnel. device ether # Required for all ethernet devices device vlan # 802.1Q VLAN support device wlan # 802.11 WLAN support # cam support for umass and ahci device scbus device pass device da device cd # Serial ports device uart # Networking device mge # Marvell Gigabit Ethernet controller device mii device mdio device e1000phy # USB options USB_HOST_ALIGN=32 # Align DMA to cacheline #options USB_DEBUG # Compile in USB debug support device usb # Basic usb support device ehci # USB host controller device umass # Mass storage device uhid # Human-interface devices device rum # Ralink Technology RT2501USB wireless NICs device uath # Atheros AR5523 wireless NICs device ural # Ralink Technology RT2500USB wireless NICs device zyd # ZyDAS zb1211/zb1211b wireless NICs device urtw # Realtek RTL8187B/L USB device upgt # Conexant/Intersil PrismGT SoftMAC USB device u3g # USB-based 3G modems (Option, Huawei, Sierra) # I2C (TWSI) device iic device iicbus device twsi # GPIO device gpio # SATA device mvs device ahci # Sound device sound device snd_uaudio #crypto device cesa # Marvell security engine device crypto device cryptodev # IPSec device enc options IPSEC options IPSEC_NAT_T options TCP_SIGNATURE # include support for RFC 2385 # IPFW options IPFIREWALL options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=100 options IPFIREWALL_NAT options LIBALIAS options DUMMYNET options IPDIVERT #PF device pf device pflog device pfsync # ALTQ, required for PF options ALTQ # Basic ALTQ support options ALTQ_CBQ # Class Based Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required if the TSC is unusable #options ALTQ_DEBUG # To use this configuration with the (rare) model 1001N (nand flash), # create a kernel config file that looks like this: # # include DREAMPLUG-1001 # nomakeoptions FDT_DTS_FILE # makeoptions FDT_DTS_FILE=dreamplug-1001N.dts # device nand # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=dreamplug-1001.dts