/*-
 * Copyright (c) 2012 Damjan Marion <dmarion@Freebsd.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * 
 * $FreeBSD$
 */

/dts-v1/;

/include/ "am335x.dtsi"

/ {
	model = "beaglebone-black";
	compatible = "beaglebone-black", "beaglebone", "ti,am335x";


	aliases {
		soc = &SOC;
		uart0 = &uart0;
	};

	memory {
		device_type = "memory";
		reg = < 0x80000000 0x20000000 >;	/* 512MB RAM */
	};

	am335x {
 		scm@44e10000 {
			/* Set of triplets < padname, muxname, padstate> */
			scm-pad-config =
				/* I2C0 */
				"I2C0_SDA", "I2C0_SDA","i2c",
				"I2C0_SCL", "I2C0_SCL","i2c",
				/* I2C1 */
				"SPI0_D1", "I2C1_SDA", "i2c",
				"SPI0_CS0", "I2C1_SCL", "i2c",
				/* I2C2 */
				"UART1_CTSn", "I2C2_SDA", "i2c",
				"UART1_RTSn", "I2C2_SCL", "i2c",
				/* Ethernet */
				"MII1_RX_ER", "gmii1_rxerr", "input_pulldown",
				"MII1_TX_EN", "gmii1_txen", "output",
				"MII1_RX_DV", "gmii1_rxdv", "input_pulldown",
				"MII1_TXD3", "gmii1_txd3", "output",
				"MII1_TXD2", "gmii1_txd2", "output",
				"MII1_TXD1", "gmii1_txd1", "output",
				"MII1_TXD0", "gmii1_txd0", "output",
				"MII1_TX_CLK", "gmii1_txclk", "input_pulldown",
				"MII1_RX_CLK", "gmii1_rxclk", "input_pulldown",
				"MII1_RXD3", "gmii1_rxd3", "input_pulldown",
				"MII1_RXD2", "gmii1_rxd2", "input_pulldown",
				"MII1_RXD1", "gmii1_rxd1",  "input_pulldown",
				"MII1_RXD0", "gmii1_rxd0",  "input_pulldown",
				"MDIO", "mdio_data", "input_pullup",
				"MDC", "mdio_clk", "output_pullup",
				/* MMCSD0 */
				"MMC0_CMD", "mmc0_cmd", "input_pullup",
				"MMC0_CLK", "mmc0_clk", "input_pullup",
				"MMC0_DAT0", "mmc0_dat0", "input_pullup",
				"MMC0_DAT1", "mmc0_dat1", "input_pullup",
				"MMC0_DAT2", "mmc0_dat2", "input_pullup",
				"MMC0_DAT3", "mmc0_dat3", "input_pullup",
				/* MMC1 */
				"GPMC_CSn1", "mmc1_clk", "input_pullup",
				"GPMC_CSn2", "mmc1_cmd", "input_pullup",
				"GPMC_CSn3", "gpio2_0", "output_pullup", /* Reset */
				"GPMC_AD0", "mmc1_dat0", "input_pullup",
				"GPMC_AD1", "mmc1_dat1", "input_pullup",
				"GPMC_AD2", "mmc1_dat2", "input_pullup",
				"GPMC_AD3", "mmc1_dat3", "input_pullup",
				"GPMC_AD4", "mmc1_dat4", "input_pullup",
				"GPMC_AD5", "mmc1_dat5", "input_pullup",
				"GPMC_AD6", "mmc1_dat6", "input_pullup",
				"GPMC_AD7", "mmc1_dat7", "input_pullup",
				/* GPIO */
				"ECAP0_IN_PWM0_OUT", "gpio0_7", "input_pulldown",
				"GPMC_AD10", "gpio0_26", "input_pulldown",
				"GPMC_AD11", "gpio0_27", "input_pulldown",
				"GPMC_AD12", "gpio1_12", "input_pulldown",
				"GPMC_AD13", "gpio1_13", "input_pulldown",
				"GPMC_AD14", "gpio1_14", "input_pulldown",
				"GPMC_AD15", "gpio1_15", "input_pulldown",
				"GPMC_A0", "gpio1_16", "input_pulldown",
				"GPMC_A1", "gpio1_17", "input_pulldown",
				"GPMC_A5", "gpio1_21", "output", /* User LED 1 */
				"GPMC_A6", "gpio1_22", "output", /* User LED 2 */
				"GPMC_A7", "gpio1_23", "output", /* User LED 3 */
				"GPMC_A8", "gpio1_24", "output", /* User LED 4 */
				"GPMC_BEn1", "gpio1_28", "input_pulldown",
				"GPMC_CSn0", "gpio1_29", "input_pulldown",
				"GPMC_CLK", "gpio2_1", "input_pulldown",
				"LCD_DATA0", "gpio2_6", "input_pulldown", 
				"LCD_DATA1", "gpio2_7", "input_pulldown", 
				"LCD_DATA2", "gpio2_8", "input_pulldown", 
				"LCD_DATA3", "gpio2_9", "input_pulldown", 
				"LCD_DATA4", "gpio2_10", "input_pulldown", 
				"LCD_DATA5", "gpio2_11", "input_pulldown", 
				"LCD_DATA6", "gpio2_12", "input_pulldown", 
				"LCD_DATA7", "gpio2_13", "input_pulldown", 
				"LCD_VSYNC", "gpio2_22", "input_pulldown",
				"LCD_HSYNC", "gpio2_23", "input_pulldown",
				"LCD_PCLK", "gpio2_24", "input_pulldown",
				"LCD_AC_BIAS_EN", "gpio2_25", "input_pulldown",
				"MCASP0_FSR", "gpio3_19", "input_pulldown",
				"MCASP0_AHCLKX", "gpio3_21", "input_pulldown",
				/* TIMERs */
				"GPMC_ADVn_ALE", "timer4", "output",
				"GPMC_BEn0_CLE", "timer5", "output",
				"GPMC_WEn", "timer6", "output",
				"GPMC_OEn_REn", "timer7", "output",
				/* USB0 and USB1 */
				"USB0_DRVVBUS", "USB0_DRVVBUS", "output",
				"USB1_DRVVBUS", "USB1_DRVVBUS", "output",
				/* PWM */
				"GPMC_A2", "ehrpwm1A", "output",
				"GPMC_A3", "ehrpwm1B", "output",
				"GPMC_AD8", "ehrpwm2A", "output",
				"GPMC_AD9", "ehrpwm2B", "output";
 		};

		mmchs1@481D8000 {
                	bus-width = <8>;
			status = "okay";
			non-removable;
		};
 
		i2c@44e0b000 {
			pmic@48 {
				compatible = "ti,am335x-pmic";
				reg = <0x48>;
			};
		};
	};

	leds {
		compatible = "gpio-leds";

		led1 {
			gpios = <&GPIO 53 2 0>;
			name = "led1";
		};

		led2 {
			gpios = <&GPIO 54 2 0>;
			name = "led2";
		};

		led3 {
			gpios = <&GPIO 55 2 0>;
			name = "led3";
		};

		led4 {
			gpios = <&GPIO 56 2 0>;
			name = "led4";
		};
	};

	chosen {
		stdin = "uart0";
		stdout = "uart0";
	};
};