/* * P2041RDB Device Tree Source * * Copyright 2011 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * Neither the name of Freescale Semiconductor nor the * names of its contributors may be used to endorse or promote products * derived from this software without specific prior written permission. * * * ALTERNATIVELY, this software may be distributed under the terms of the * GNU General Public License ("GPL") as published by the Free Software * Foundation, either version 2 of that License or (at your option) any * later version. * * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* $FreeBSD$ */ /include/ "p2041si.dtsi" / { model = "fsl,P2041RDB"; compatible = "fsl,P2041RDB"; #address-cells = <2>; #size-cells = <2>; interrupt-parent = <&mpic>; aliases { phy_rgmii_0 = &phy_rgmii_0; phy_rgmii_1 = &phy_rgmii_1; phy_sgmii_2 = &phy_sgmii_2; phy_sgmii_3 = &phy_sgmii_3; phy_sgmii_4 = &phy_sgmii_4; phy_sgmii_1c = &phy_sgmii_1c; phy_sgmii_1d = &phy_sgmii_1d; phy_sgmii_1e = &phy_sgmii_1e; phy_sgmii_1f = &phy_sgmii_1f; phy_xgmii_2 = &phy_xgmii_2; }; memory { device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x80000000>; }; dcsr: dcsr@f00000000 { ranges = <0x00000000 0xf 0x00000000 0x01008000>; }; bman-portals@ff4000000 { bman-portal@0 { cpu-handle = <&cpu0>; }; bman-portal@4000 { cpu-handle = <&cpu1>; }; bman-portal@8000 { cpu-handle = <&cpu2>; }; bman-portal@c000 { cpu-handle = <&cpu3>; }; bman-portal@10000 { }; bman-portal@14000 { }; bman-portal@18000 { }; bman-portal@1c000 { }; bman-portal@20000 { }; bman-portal@24000 { }; buffer-pool@0 { compatible = "fsl,p2041-bpool", "fsl,bpool"; fsl,bpid = <0>; fsl,bpool-cfg = <0 0x100 0 1 0 0x100>; }; }; qman-portals@ff4200000 { qportal0: qman-portal@0 { cpu-handle = <&cpu0>; fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3 &qpool4 &qpool5 &qpool6 &qpool7 &qpool8 &qpool9 &qpool10 &qpool11 &qpool12 &qpool13 &qpool14 &qpool15>; }; qportal1: qman-portal@4000 { cpu-handle = <&cpu1>; fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3 &qpool4 &qpool5 &qpool6 &qpool7 &qpool8 &qpool9 &qpool10 &qpool11 &qpool12 &qpool13 &qpool14 &qpool15>; }; qportal2: qman-portal@8000 { cpu-handle = <&cpu2>; fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3 &qpool4 &qpool5 &qpool6 &qpool7 &qpool8 &qpool9 &qpool10 &qpool11 &qpool12 &qpool13 &qpool14 &qpool15>; }; qportal3: qman-portal@c000 { cpu-handle = <&cpu3>; fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3 &qpool4 &qpool5 &qpool6 &qpool7 &qpool8 &qpool9 &qpool10 &qpool11 &qpool12 &qpool13 &qpool14 &qpool15>; }; qportal4: qman-portal@10000 { fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3 &qpool4 &qpool5 &qpool6 &qpool7 &qpool8 &qpool9 &qpool10 &qpool11 &qpool12 &qpool13 &qpool14 &qpool15>; }; qportal5: qman-portal@14000 { fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3 &qpool4 &qpool5 &qpool6 &qpool7 &qpool8 &qpool9 &qpool10 &qpool11 &qpool12 &qpool13 &qpool14 &qpool15>; }; qportal6: qman-portal@18000 { fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3 &qpool4 &qpool5 &qpool6 &qpool7 &qpool8 &qpool9 &qpool10 &qpool11 &qpool12 &qpool13 &qpool14 &qpool15>; }; qportal7: qman-portal@1c000 { fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3 &qpool4 &qpool5 &qpool6 &qpool7 &qpool8 &qpool9 &qpool10 &qpool11 &qpool12 &qpool13 &qpool14 &qpool15>; }; qportal8: qman-portal@20000 { fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3 &qpool4 &qpool5 &qpool6 &qpool7 &qpool8 &qpool9 &qpool10 &qpool11 &qpool12 &qpool13 &qpool14 &qpool15>; }; qportal9: qman-portal@24000 { fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3 &qpool4 &qpool5 &qpool6 &qpool7 &qpool8 &qpool9 &qpool10 &qpool11 &qpool12 &qpool13 &qpool14 &qpool15>; }; }; soc: soc@ffe000000 { spi@110000 { flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,s25sl12801"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ partition@u-boot { label = "u-boot"; reg = <0x00000000 0x00100000>; read-only; }; partition@kernel { label = "kernel"; reg = <0x00100000 0x00500000>; read-only; }; partition@dtb { label = "dtb"; reg = <0x00600000 0x00100000>; read-only; }; partition@fs { label = "file system"; reg = <0x00700000 0x00900000>; }; }; }; i2c@118000 { lm75b@48 { compatible = "nxp,lm75a"; reg = <0x48>; }; eeprom@50 { compatible = "at24,24c256"; reg = <0x50>; }; rtc@68 { compatible = "pericom,pt7c4338"; reg = <0x68>; }; }; i2c@118100 { eeprom@50 { compatible = "at24,24c256"; reg = <0x50>; }; }; usb1: usb@211000 { dr_mode = "host"; }; pme: pme@316000 { /* Commented out, use default allocation */ /* fsl,pme-pdsr = <0x0 0x23000000 0x0 0x01000000>; */ /* fsl,pme-sre = <0x0 0x24000000 0x0 0x00a00000>; */ }; qman: qman@318000 { /* Commented out, use default allocation */ /* fsl,qman-fqd = <0x0 0x20000000 0x0 0x01000000>; */ /* fsl,qman-pfdr = <0x0 0x21000000 0x0 0x01000000>; */ }; bman: bman@31a000 { /* Same as fsl,qman-*, use default allocation */ /* fsl,bman-fbpr = <0x0 0x22000000 0x0 0x01000000>; */ }; fman0: fman@400000 { enet0: ethernet@e0000 { tbi-handle = <&tbi0>; phy-handle = <&phy_sgmii_2>; phy-connection-type = "sgmii"; }; mdio0: mdio@e1120 { tbi0: tbi-phy@8 { reg = <0x8>; device_type = "tbi-phy"; }; phy_rgmii_0: ethernet-phy@0 { reg = <0x0>; }; phy_rgmii_1: ethernet-phy@1 { reg = <0x1>; }; phy_sgmii_2: ethernet-phy@2 { reg = <0x2>; }; phy_sgmii_3: ethernet-phy@3 { reg = <0x3>; }; phy_sgmii_4: ethernet-phy@4 { reg = <0x4>; }; phy_sgmii_1c: ethernet-phy@1c { reg = <0x1c>; }; phy_sgmii_1d: ethernet-phy@1d { reg = <0x1d>; }; phy_sgmii_1e: ethernet-phy@1e { reg = <0x1e>; }; phy_sgmii_1f: ethernet-phy@1f { reg = <0x1f>; }; }; enet1: ethernet@e2000 { tbi-handle = <&tbi1>; phy-handle = <&phy_sgmii_3>; phy-connection-type = "sgmii"; }; mdio@e3120 { tbi1: tbi-phy@8 { reg = <8>; device_type = "tbi-phy"; }; }; enet2: ethernet@e4000 { tbi-handle = <&tbi2>; phy-handle = <&phy_sgmii_4>; phy-connection-type = "sgmii"; }; mdio@e5120 { tbi2: tbi-phy@8 { reg = <8>; device_type = "tbi-phy"; }; }; enet3: ethernet@e6000 { tbi-handle = <&tbi3>; phy-handle = <&phy_rgmii_1>; phy-connection-type = "rgmii"; }; mdio@e7120 { tbi3: tbi-phy@8 { reg = <8>; device_type = "tbi-phy"; }; }; enet4: ethernet@e8000 { tbi-handle = <&tbi4>; phy-handle = <&phy_rgmii_0>; phy-connection-type = "rgmii"; }; mdio@e9120 { tbi4: tbi-phy@8 { reg = <8>; device_type = "tbi-phy"; }; }; enet5: ethernet@f0000 { /* * phy-handle will be updated by U-Boot to * reflect the actual slot the XAUI card is in. */ phy-handle = <&phy_xgmii_2>; phy-connection-type = "xgmii"; }; mdio@f1000 { /* XAUI card in slot 2 */ phy_xgmii_2: ethernet-phy@0 { reg = <0x0>; }; }; }; }; rapidio@ffe0c0000 { reg = <0xf 0xfe0c0000 0 0x11000>; port1 { ranges = <0 0 0xc 0x20000000 0 0x10000000>; }; port2 { ranges = <0 0 0xc 0x30000000 0 0x10000000>; }; }; localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x1000>; ranges = <0 0 0xf 0xb8000000 0x04000000>; flash@0,0 { compatible = "cfi-flash"; /* * Map 64Mb of 128MB NOR flash memory. Since highest * line of address of NOR flash memory are set by * FPGA, memory are divided into two pages equal to * 64MB. One of the pages can be accessed at once. */ reg = <0 0 0x04000000>; bank-width = <2>; device-width = <2>; }; }; pci0: pcie@ffe200000 { reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0x80000000 0x0 0x80000000 0x0 0x10000000 0x01000000 0 0x00000000 0x0 0xff000000 0x0 0x00010000>; pcie@0 { ranges = <0x02000000 0 0x80000000 0x02000000 0 0x80000000 0 0x10000000 0x01000000 0 0x00000000 0x01000000 0 0xff000000 0 0x00010000>; }; }; pci1: pcie@ffe201000 { reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0x90000000 0x0 0x90000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0x0 0xff010000 0x0 0x00010000>; pcie@0 { ranges = <0x02000000 0 0x90000000 0x02000000 0 0x90000000 0 0x10000000 0x01000000 0 0x00000000 0x01000000 0 0xff010000 0 0x00010000>; }; }; pci2: pcie@ffe202000 { reg = <0xf 0xfe202000 0 0x1000>; ranges = <0x02000000 0 0xa0000000 0x0 0xa0000000 0 0x10000000 0x01000000 0 0x00000000 0x0 0xff020000 0 0x00010000>; pcie@0 { ranges = <0x02000000 0 0xa0000000 0x02000000 0 0xa0000000 0 0x10000000 0x01000000 0 0x00000000 0x01000000 0 0xff020000 0 0x00010000>; }; }; fsl,dpaa { compatible = "fsl,p2041-dpaa", "fsl,dpaa"; ethernet@0 { compatible = "fsl,p2041-dpa-ethernet", "fsl,dpa-ethernet"; fsl,qman-channel = <&qpool1>; fsl,fman-mac = <&enet0>; status = "okay"; }; ethernet@1 { compatible = "fsl,p2041-dpa-ethernet", "fsl,dpa-ethernet"; fsl,qman-channel = <&qpool1>; fsl,fman-mac = <&enet1>; status = "okay"; }; ethernet@2 { compatible = "fsl,p2041-dpa-ethernet", "fsl,dpa-ethernet"; fsl,qman-channel = <&qpool1>; fsl,fman-mac = <&enet2>; status = "okay"; }; ethernet@3 { compatible = "fsl,p2041-dpa-ethernet", "fsl,dpa-ethernet"; fsl,qman-channel = <&qpool1>; fsl,fman-mac = <&enet3>; status = "okay"; }; ethernet@4 { compatible = "fsl,p2041-dpa-ethernet", "fsl,dpa-ethernet"; fsl,qman-channel = <&qpool1>; fsl,fman-mac = <&enet4>; status = "okay"; }; ethernet@5 { compatible = "fsl,p2041-dpa-ethernet", "fsl,dpa-ethernet"; fsl,qman-channel = <&qpool1>; fsl,fman-mac = <&enet5>; status = "okay"; }; }; chosen { stdin = "serial0"; stdout = "serial0"; }; };