/*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2000 Matthew Jacob * Copyright (c) 2010 Spectra Logic Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /** * \file scsi_enc_ses.c * * Structures and routines specific && private to SES only */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* SES Native Type Device Support */ /* SES Diagnostic Page Codes */ typedef enum { SesSupportedPages = 0x0, SesConfigPage = 0x1, SesControlPage = 0x2, SesStatusPage = SesControlPage, SesHelpTxt = 0x3, SesStringOut = 0x4, SesStringIn = SesStringOut, SesThresholdOut = 0x5, SesThresholdIn = SesThresholdOut, SesArrayControl = 0x6, /* Obsolete in SES v2 */ SesArrayStatus = SesArrayControl, SesElementDescriptor = 0x7, SesShortStatus = 0x8, SesEnclosureBusy = 0x9, SesAddlElementStatus = 0xa } SesDiagPageCodes; typedef struct ses_type { const struct ses_elm_type_desc *hdr; const char *text; } ses_type_t; typedef struct ses_comstat { uint8_t comstatus; uint8_t comstat[3]; } ses_comstat_t; typedef union ses_addl_data { struct ses_elm_sas_device_phy *sasdev_phys; struct ses_elm_sas_expander_phy *sasexp_phys; struct ses_elm_sas_port_phy *sasport_phys; struct ses_fcobj_port *fc_ports; } ses_add_data_t; typedef struct ses_addl_status { struct ses_elm_addlstatus_base_hdr *hdr; union { union ses_fcobj_hdr *fc; union ses_elm_sas_hdr *sas; } proto_hdr; union ses_addl_data proto_data; /* array sizes stored in header */ } ses_add_status_t; typedef struct ses_element { uint8_t eip; /* eip bit is set */ uint16_t descr_len; /* length of the descriptor */ char *descr; /* descriptor for this object */ struct ses_addl_status addl; /* additional status info */ } ses_element_t; typedef struct ses_control_request { int elm_idx; ses_comstat_t elm_stat; int result; TAILQ_ENTRY(ses_control_request) links; } ses_control_request_t; TAILQ_HEAD(ses_control_reqlist, ses_control_request); typedef struct ses_control_reqlist ses_control_reqlist_t; enum { SES_SETSTATUS_ENC_IDX = -1 }; static void ses_terminate_control_requests(ses_control_reqlist_t *reqlist, int result) { ses_control_request_t *req; while ((req = TAILQ_FIRST(reqlist)) != NULL) { TAILQ_REMOVE(reqlist, req, links); req->result = result; wakeup(req); } } enum ses_iter_index_values { /** * \brief Value of an initialized but invalid index * in a ses_iterator object. * * This value is used for the individual_element_index of * overal status elements and for all index types when * an iterator is first initialized. */ ITERATOR_INDEX_INVALID = -1, /** * \brief Value of an index in a ses_iterator object * when the iterator has traversed past the last * valid element.. */ ITERATOR_INDEX_END = INT_MAX }; /** * \brief Structure encapsulating all data necessary to traverse the * elements of a SES configuration. * * The ses_iterator object simplifies the task of iterating through all * elements detected via the SES configuration page by tracking the numerous * element indexes that, instead of memoizing in the softc, we calculate * on the fly during the traversal of the element objects. The various * indexes are necessary due to the varying needs of matching objects in * the different SES pages. Some pages (e.g. Status/Control) contain all * elements, while others (e.g. Additional Element Status) only contain * individual elements (no overal status elements) of particular types. * * To use an iterator, initialize it with ses_iter_init(), and then * use ses_iter_next() to traverse the elements (including the first) in * the configuration. Once an iterator is initiailized with ses_iter_init(), * you may also seek to any particular element by either it's global or * individual element index via the ses_iter_seek_to() function. You may * also return an iterator to the position just before the first element * (i.e. the same state as after an ses_iter_init()), with ses_iter_reset(). */ struct ses_iterator { /** * \brief Backlink to the overal software configuration structure. * * This is included for convenience so the iteration functions * need only take a single, struct ses_iterator *, argument. */ enc_softc_t *enc; enc_cache_t *cache; /** * \brief Index of the type of the current element within the * ses_cache's ses_types array. */ int type_index; /** * \brief The position (0 based) of this element relative to all other * elements of this type. * * This index resets to zero every time the iterator transitions * to elements of a new type in the configuration. */ int type_element_index; /** * \brief The position (0 based) of this element relative to all * other individual status elements in the configuration. * * This index ranges from 0 through the number of individual * elements in the configuration. When the iterator returns * an overall status element, individual_element_index is * set to ITERATOR_INDEX_INVALID, to indicate that it does * not apply to the current element. */ int individual_element_index; /** * \brief The position (0 based) of this element relative to * all elements in the configration. * * This index is appropriate for indexing into enc->ses_elm_map. */ int global_element_index; /** * \brief The last valid individual element index of this * iterator. * * When an iterator traverses an overal status element, the * individual element index is reset to ITERATOR_INDEX_INVALID * to prevent unintential use of the individual_element_index * field. The saved_individual_element_index allows the iterator * to restore it's position in the individual elements upon * reaching the next individual element. */ int saved_individual_element_index; }; typedef enum { SES_UPDATE_NONE, SES_UPDATE_PAGES, SES_UPDATE_GETCONFIG, SES_UPDATE_GETSTATUS, SES_UPDATE_GETELMDESCS, SES_UPDATE_GETELMADDLSTATUS, SES_PROCESS_CONTROL_REQS, SES_PUBLISH_PHYSPATHS, SES_PUBLISH_CACHE, SES_NUM_UPDATE_STATES } ses_update_action; static enc_softc_cleanup_t ses_softc_cleanup; #define SCSZ 0x8000 static fsm_fill_handler_t ses_fill_rcv_diag_io; static fsm_fill_handler_t ses_fill_control_request; static fsm_done_handler_t ses_process_pages; static fsm_done_handler_t ses_process_config; static fsm_done_handler_t ses_process_status; static fsm_done_handler_t ses_process_elm_descs; static fsm_done_handler_t ses_process_elm_addlstatus; static fsm_done_handler_t ses_process_control_request; static fsm_done_handler_t ses_publish_physpaths; static fsm_done_handler_t ses_publish_cache; static struct enc_fsm_state enc_fsm_states[SES_NUM_UPDATE_STATES] = { { "SES_UPDATE_NONE", 0, 0, 0, NULL, NULL, NULL }, { "SES_UPDATE_PAGES", SesSupportedPages, SCSZ, 60 * 1000, ses_fill_rcv_diag_io, ses_process_pages, enc_error }, { "SES_UPDATE_GETCONFIG", SesConfigPage, SCSZ, 60 * 1000, ses_fill_rcv_diag_io, ses_process_config, enc_error }, { "SES_UPDATE_GETSTATUS", SesStatusPage, SCSZ, 60 * 1000, ses_fill_rcv_diag_io, ses_process_status, enc_error }, { "SES_UPDATE_GETELMDESCS", SesElementDescriptor, SCSZ, 60 * 1000, ses_fill_rcv_diag_io, ses_process_elm_descs, enc_error }, { "SES_UPDATE_GETELMADDLSTATUS", SesAddlElementStatus, SCSZ, 60 * 1000, ses_fill_rcv_diag_io, ses_process_elm_addlstatus, enc_error }, { "SES_PROCESS_CONTROL_REQS", SesControlPage, SCSZ, 60 * 1000, ses_fill_control_request, ses_process_control_request, enc_error }, { "SES_PUBLISH_PHYSPATHS", 0, 0, 0, NULL, ses_publish_physpaths, NULL }, { "SES_PUBLISH_CACHE", 0, 0, 0, NULL, ses_publish_cache, NULL } }; typedef struct ses_cache { /* Source for all the configuration data pointers */ const struct ses_cfg_page *cfg_page; /* References into the config page. */ int ses_nsubencs; const struct ses_enc_desc * const *subencs; int ses_ntypes; const ses_type_t *ses_types; /* Source for all the status pointers */ const struct ses_status_page *status_page; /* Source for all the object descriptor pointers */ const struct ses_elem_descr_page *elm_descs_page; /* Source for all the additional object status pointers */ const struct ses_addl_elem_status_page *elm_addlstatus_page; } ses_cache_t; typedef struct ses_softc { uint32_t ses_flags; #define SES_FLAG_TIMEDCOMP 0x01 #define SES_FLAG_ADDLSTATUS 0x02 #define SES_FLAG_DESC 0x04 ses_control_reqlist_t ses_requests; ses_control_reqlist_t ses_pending_requests; } ses_softc_t; /** * \brief Reset a SES iterator to just before the first element * in the configuration. * * \param iter The iterator object to reset. * * The indexes within a reset iterator are invalid and will only * become valid upon completion of a ses_iter_seek_to() or a * ses_iter_next(). */ static void ses_iter_reset(struct ses_iterator *iter) { /* * Set our indexes to just before the first valid element * of the first type (ITERATOR_INDEX_INVALID == -1). This * simplifies the implementation of ses_iter_next(). */ iter->type_index = 0; iter->type_element_index = ITERATOR_INDEX_INVALID; iter->global_element_index = ITERATOR_INDEX_INVALID; iter->individual_element_index = ITERATOR_INDEX_INVALID; iter->saved_individual_element_index = ITERATOR_INDEX_INVALID; } /** * \brief Initialize the storage of a SES iterator and reset it to * the position just before the first element of the * configuration. * * \param enc The SES softc for the SES instance whose configuration * will be enumerated by this iterator. * \param iter The iterator object to initialize. */ static void ses_iter_init(enc_softc_t *enc, enc_cache_t *cache, struct ses_iterator *iter) { iter->enc = enc; iter->cache = cache; ses_iter_reset(iter); } /** * \brief Traverse the provided SES iterator to the next element * within the configuraiton. * * \param iter The iterator to move. * * \return If a valid next element exists, a pointer to it's enc_element_t. * Otherwise NULL. */ static enc_element_t * ses_iter_next(struct ses_iterator *iter) { ses_cache_t *ses_cache; const ses_type_t *element_type; ses_cache = iter->cache->private; /* * Note: Treat nelms as signed, so we will hit this case * and immediately terminate the iteration if the * configuration has 0 objects. */ if (iter->global_element_index >= (int)iter->cache->nelms - 1) { /* Elements exhausted. */ iter->type_index = ITERATOR_INDEX_END; iter->type_element_index = ITERATOR_INDEX_END; iter->global_element_index = ITERATOR_INDEX_END; iter->individual_element_index = ITERATOR_INDEX_END; return (NULL); } KASSERT((iter->type_index < ses_cache->ses_ntypes), ("Corrupted element iterator. %d not less than %d", iter->type_index, ses_cache->ses_ntypes)); element_type = &ses_cache->ses_types[iter->type_index]; iter->global_element_index++; iter->type_element_index++; /* * There is an object for overal type status in addition * to one for each allowed element, but only if the element * count is non-zero. */ if (iter->type_element_index > element_type->hdr->etype_maxelt) { /* * We've exhausted the elements of this type. * This next element belongs to the next type. */ iter->type_index++; iter->type_element_index = 0; iter->saved_individual_element_index = iter->individual_element_index; iter->individual_element_index = ITERATOR_INDEX_INVALID; } if (iter->type_element_index > 0) { if (iter->type_element_index == 1) { iter->individual_element_index = iter->saved_individual_element_index; } iter->individual_element_index++; } return (&iter->cache->elm_map[iter->global_element_index]); } /** * Element index types tracked by a SES iterator. */ typedef enum { /** * Index relative to all elements (overall and individual) * in the system. */ SES_ELEM_INDEX_GLOBAL, /** * \brief Index relative to all individual elements in the system. * * This index counts only individual elements, skipping overall * status elements. This is the index space of the additional * element status page (page 0xa). */ SES_ELEM_INDEX_INDIVIDUAL } ses_elem_index_type_t; /** * \brief Move the provided iterator forwards or backwards to the object * having the give index. * * \param iter The iterator on which to perform the seek. * \param element_index The index of the element to find. * \param index_type The type (global or individual) of element_index. * * \return If the element is found, a pointer to it's enc_element_t. * Otherwise NULL. */ static enc_element_t * ses_iter_seek_to(struct ses_iterator *iter, int element_index, ses_elem_index_type_t index_type) { enc_element_t *element; int *cur_index; if (index_type == SES_ELEM_INDEX_GLOBAL) cur_index = &iter->global_element_index; else cur_index = &iter->individual_element_index; if (*cur_index == element_index) { /* Already there. */ return (&iter->cache->elm_map[iter->global_element_index]); } ses_iter_reset(iter); while ((element = ses_iter_next(iter)) != NULL && *cur_index != element_index) ; if (*cur_index != element_index) return (NULL); return (element); } #if 0 static int ses_encode(enc_softc_t *, uint8_t *, int, int, struct ses_comstat *); #endif static int ses_set_timed_completion(enc_softc_t *, uint8_t); #if 0 static int ses_putstatus(enc_softc_t *, int, struct ses_comstat *); #endif static void ses_poll_status(enc_softc_t *); static void ses_print_addl_data(enc_softc_t *, enc_element_t *); /*=========================== SES cleanup routines ===========================*/ static void ses_cache_free_elm_addlstatus(enc_softc_t *enc, enc_cache_t *cache) { ses_cache_t *ses_cache; ses_cache_t *other_ses_cache; enc_element_t *cur_elm; enc_element_t *last_elm; ENC_DLOG(enc, "%s: enter\n", __func__); ses_cache = cache->private; if (ses_cache->elm_addlstatus_page == NULL) return; for (cur_elm = cache->elm_map, last_elm = &cache->elm_map[cache->nelms]; cur_elm != last_elm; cur_elm++) { ses_element_t *elmpriv; elmpriv = cur_elm->elm_private; /* Clear references to the additional status page. */ bzero(&elmpriv->addl, sizeof(elmpriv->addl)); } other_ses_cache = enc_other_cache(enc, cache)->private; if (other_ses_cache->elm_addlstatus_page != ses_cache->elm_addlstatus_page) ENC_FREE(ses_cache->elm_addlstatus_page); ses_cache->elm_addlstatus_page = NULL; } static void ses_cache_free_elm_descs(enc_softc_t *enc, enc_cache_t *cache) { ses_cache_t *ses_cache; ses_cache_t *other_ses_cache; enc_element_t *cur_elm; enc_element_t *last_elm; ENC_DLOG(enc, "%s: enter\n", __func__); ses_cache = cache->private; if (ses_cache->elm_descs_page == NULL) return; for (cur_elm = cache->elm_map, last_elm = &cache->elm_map[cache->nelms]; cur_elm != last_elm; cur_elm++) { ses_element_t *elmpriv; elmpriv = cur_elm->elm_private; elmpriv->descr_len = 0; elmpriv->descr = NULL; } other_ses_cache = enc_other_cache(enc, cache)->private; if (other_ses_cache->elm_descs_page != ses_cache->elm_descs_page) ENC_FREE(ses_cache->elm_descs_page); ses_cache->elm_descs_page = NULL; } static void ses_cache_free_status(enc_softc_t *enc, enc_cache_t *cache) { ses_cache_t *ses_cache; ses_cache_t *other_ses_cache; ENC_DLOG(enc, "%s: enter\n", __func__); ses_cache = cache->private; if (ses_cache->status_page == NULL) return; other_ses_cache = enc_other_cache(enc, cache)->private; if (other_ses_cache->status_page != ses_cache->status_page) ENC_FREE(ses_cache->status_page); ses_cache->status_page = NULL; } static void ses_cache_free_elm_map(enc_softc_t *enc, enc_cache_t *cache) { enc_element_t *cur_elm; enc_element_t *last_elm; ENC_DLOG(enc, "%s: enter\n", __func__); if (cache->elm_map == NULL) return; ses_cache_free_elm_descs(enc, cache); ses_cache_free_elm_addlstatus(enc, cache); for (cur_elm = cache->elm_map, last_elm = &cache->elm_map[cache->nelms]; cur_elm != last_elm; cur_elm++) { ENC_FREE_AND_NULL(cur_elm->elm_private); } ENC_FREE_AND_NULL(cache->elm_map); cache->nelms = 0; ENC_DLOG(enc, "%s: exit\n", __func__); } static void ses_cache_free(enc_softc_t *enc, enc_cache_t *cache) { ses_cache_t *other_ses_cache; ses_cache_t *ses_cache; ENC_DLOG(enc, "%s: enter\n", __func__); ses_cache_free_elm_addlstatus(enc, cache); ses_cache_free_status(enc, cache); ses_cache_free_elm_map(enc, cache); ses_cache = cache->private; ses_cache->ses_ntypes = 0; other_ses_cache = enc_other_cache(enc, cache)->private; if (other_ses_cache->subencs != ses_cache->subencs) ENC_FREE(ses_cache->subencs); ses_cache->subencs = NULL; if (other_ses_cache->ses_types != ses_cache->ses_types) ENC_FREE(ses_cache->ses_types); ses_cache->ses_types = NULL; if (other_ses_cache->cfg_page != ses_cache->cfg_page) ENC_FREE(ses_cache->cfg_page); ses_cache->cfg_page = NULL; ENC_DLOG(enc, "%s: exit\n", __func__); } static void ses_cache_clone(enc_softc_t *enc, enc_cache_t *src, enc_cache_t *dst) { ses_cache_t *dst_ses_cache; ses_cache_t *src_ses_cache; enc_element_t *src_elm; enc_element_t *dst_elm; enc_element_t *last_elm; ses_cache_free(enc, dst); src_ses_cache = src->private; dst_ses_cache = dst->private; /* * The cloned enclosure cache and ses specific cache are * mostly identical to the source. */ *dst = *src; *dst_ses_cache = *src_ses_cache; /* * But the ses cache storage is still independent. Restore * the pointer that was clobbered by the structure copy above. */ dst->private = dst_ses_cache; /* * The element map is independent even though it starts out * pointing to the same constant page data. */ dst->elm_map = malloc(dst->nelms * sizeof(enc_element_t), M_SCSIENC, M_WAITOK); memcpy(dst->elm_map, src->elm_map, dst->nelms * sizeof(enc_element_t)); for (dst_elm = dst->elm_map, src_elm = src->elm_map, last_elm = &src->elm_map[src->nelms]; src_elm != last_elm; src_elm++, dst_elm++) { dst_elm->elm_private = malloc(sizeof(ses_element_t), M_SCSIENC, M_WAITOK); memcpy(dst_elm->elm_private, src_elm->elm_private, sizeof(ses_element_t)); } } /* Structure accessors. These are strongly typed to avoid errors. */ int ses_elm_sas_descr_type(union ses_elm_sas_hdr *obj) { return ((obj)->base_hdr.byte1 >> 6); } int ses_elm_addlstatus_proto(struct ses_elm_addlstatus_base_hdr *hdr) { return ((hdr)->byte0 & 0xf); } int ses_elm_addlstatus_eip(struct ses_elm_addlstatus_base_hdr *hdr) { return ((hdr)->byte0 >> 4) & 0x1; } int ses_elm_addlstatus_invalid(struct ses_elm_addlstatus_base_hdr *hdr) { return ((hdr)->byte0 >> 7); } int ses_elm_sas_type0_not_all_phys(union ses_elm_sas_hdr *hdr) { return ((hdr)->type0_noneip.byte1 & 0x1); } int ses_elm_sas_dev_phy_sata_dev(struct ses_elm_sas_device_phy *phy) { return ((phy)->target_ports & 0x1); } int ses_elm_sas_dev_phy_sata_port(struct ses_elm_sas_device_phy *phy) { return ((phy)->target_ports >> 7); } int ses_elm_sas_dev_phy_dev_type(struct ses_elm_sas_device_phy *phy) { return (((phy)->byte0 >> 4) & 0x7); } /** * \brief Verify that the cached configuration data in our softc * is valid for processing the page data corresponding to * the provided page header. * * \param ses_cache The SES cache to validate. * \param gen_code The 4 byte generation code from a SES diagnostic * page header. * * \return non-zero if true, 0 if false. */ static int ses_config_cache_valid(ses_cache_t *ses_cache, const uint8_t *gen_code) { uint32_t cache_gc; uint32_t cur_gc; if (ses_cache->cfg_page == NULL) return (0); cache_gc = scsi_4btoul(ses_cache->cfg_page->hdr.gen_code); cur_gc = scsi_4btoul(gen_code); return (cache_gc == cur_gc); } /** * Function signature for consumers of the ses_devids_iter() interface. */ typedef void ses_devid_callback_t(enc_softc_t *, enc_element_t *, struct scsi_vpd_id_descriptor *, void *); /** * \brief Iterate over and create vpd device id records from the * additional element status data for elm, passing that data * to the provided callback. * * \param enc SES instance containing elm * \param elm Element for which to extract device ID data. * \param callback The callback function to invoke on each generated * device id descriptor for elm. * \param callback_arg Argument passed through to callback on each invocation. */ static void ses_devids_iter(enc_softc_t *enc, enc_element_t *elm, ses_devid_callback_t *callback, void *callback_arg) { ses_element_t *elmpriv; struct ses_addl_status *addl; u_int i; size_t devid_record_size; elmpriv = elm->elm_private; addl = &(elmpriv->addl); /* * Don't assume this object has additional status information, or * that it is a SAS device, or that it is a device slot device. */ if (addl->hdr == NULL || addl->proto_hdr.sas == NULL || addl->proto_data.sasdev_phys == NULL) return; devid_record_size = SVPD_DEVICE_ID_DESC_HDR_LEN + sizeof(struct scsi_vpd_id_naa_ieee_reg); for (i = 0; i < addl->proto_hdr.sas->base_hdr.num_phys; i++) { uint8_t devid_buf[devid_record_size]; struct scsi_vpd_id_descriptor *devid; uint8_t *phy_addr; devid = (struct scsi_vpd_id_descriptor *)devid_buf; phy_addr = addl->proto_data.sasdev_phys[i].phy_addr; devid->proto_codeset = (SCSI_PROTO_SAS << SVPD_ID_PROTO_SHIFT) | SVPD_ID_CODESET_BINARY; devid->id_type = SVPD_ID_PIV | SVPD_ID_ASSOC_PORT | SVPD_ID_TYPE_NAA; devid->reserved = 0; devid->length = sizeof(struct scsi_vpd_id_naa_ieee_reg); memcpy(devid->identifier, phy_addr, devid->length); callback(enc, elm, devid, callback_arg); } } /** * Function signature for consumers of the ses_paths_iter() interface. */ typedef void ses_path_callback_t(enc_softc_t *, enc_element_t *, struct cam_path *, void *); /** * Argument package passed through ses_devids_iter() by * ses_paths_iter() to ses_path_iter_devid_callback(). */ typedef struct ses_path_iter_args { ses_path_callback_t *callback; void *callback_arg; } ses_path_iter_args_t; /** * ses_devids_iter() callback function used by ses_paths_iter() * to map device ids to peripheral driver instances. * * \param enc SES instance containing elm * \param elm Element on which device ID matching is active. * \param periph A device ID corresponding to elm. * \param arg Argument passed through to callback on each invocation. */ static void ses_path_iter_devid_callback(enc_softc_t *enc, enc_element_t *elem, struct scsi_vpd_id_descriptor *devid, void *arg) { struct ccb_dev_match cdm; struct dev_match_pattern match_pattern; struct dev_match_result match_result; struct device_match_result *device_match; struct device_match_pattern *device_pattern; ses_path_iter_args_t *args; args = (ses_path_iter_args_t *)arg; match_pattern.type = DEV_MATCH_DEVICE; device_pattern = &match_pattern.pattern.device_pattern; device_pattern->flags = DEV_MATCH_DEVID; device_pattern->data.devid_pat.id_len = offsetof(struct scsi_vpd_id_descriptor, identifier) + devid->length; memcpy(device_pattern->data.devid_pat.id, devid, device_pattern->data.devid_pat.id_len); memset(&cdm, 0, sizeof(cdm)); if (xpt_create_path(&cdm.ccb_h.path, /*periph*/NULL, CAM_XPT_PATH_ID, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) return; cdm.ccb_h.func_code = XPT_DEV_MATCH; cdm.num_patterns = 1; cdm.patterns = &match_pattern; cdm.pattern_buf_len = sizeof(match_pattern); cdm.match_buf_len = sizeof(match_result); cdm.matches = &match_result; xpt_action((union ccb *)&cdm); xpt_free_path(cdm.ccb_h.path); if ((cdm.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP || (cdm.status != CAM_DEV_MATCH_LAST && cdm.status != CAM_DEV_MATCH_MORE) || cdm.num_matches == 0) return; device_match = &match_result.result.device_result; if (xpt_create_path(&cdm.ccb_h.path, /*periph*/NULL, device_match->path_id, device_match->target_id, device_match->target_lun) != CAM_REQ_CMP) return; args->callback(enc, elem, cdm.ccb_h.path, args->callback_arg); xpt_free_path(cdm.ccb_h.path); } /** * \brief Iterate over and find the matching periph objects for the * specified element. * * \param enc SES instance containing elm * \param elm Element for which to perform periph object matching. * \param callback The callback function to invoke with each matching * periph object. * \param callback_arg Argument passed through to callback on each invocation. */ static void ses_paths_iter(enc_softc_t *enc, enc_element_t *elm, ses_path_callback_t *callback, void *callback_arg) { ses_path_iter_args_t args; args.callback = callback; args.callback_arg = callback_arg; ses_devids_iter(enc, elm, ses_path_iter_devid_callback, &args); } /** * ses_paths_iter() callback function used by ses_get_elmdevname() * to record periph driver instance strings corresponding to a SES * element. * * \param enc SES instance containing elm * \param elm Element on which periph matching is active. * \param periph A periph instance that matches elm. * \param arg Argument passed through to callback on each invocation. */ static void ses_elmdevname_callback(enc_softc_t *enc, enc_element_t *elem, struct cam_path *path, void *arg) { struct sbuf *sb; sb = (struct sbuf *)arg; cam_periph_list(path, sb); } /** * Argument package passed through ses_paths_iter() to * ses_getcampath_callback. */ typedef struct ses_setphyspath_callback_args { struct sbuf *physpath; int num_set; } ses_setphyspath_callback_args_t; /** * \brief ses_paths_iter() callback to set the physical path on the * CAM EDT entries corresponding to a given SES element. * * \param enc SES instance containing elm * \param elm Element on which periph matching is active. * \param periph A periph instance that matches elm. * \param arg Argument passed through to callback on each invocation. */ static void ses_setphyspath_callback(enc_softc_t *enc, enc_element_t *elm, struct cam_path *path, void *arg) { struct ccb_dev_advinfo cdai; ses_setphyspath_callback_args_t *args; char *old_physpath; args = (ses_setphyspath_callback_args_t *)arg; old_physpath = malloc(MAXPATHLEN, M_SCSIENC, M_WAITOK|M_ZERO); cam_periph_lock(enc->periph); xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL); cdai.ccb_h.func_code = XPT_DEV_ADVINFO; cdai.buftype = CDAI_TYPE_PHYS_PATH; cdai.flags = CDAI_FLAG_NONE; cdai.bufsiz = MAXPATHLEN; cdai.buf = old_physpath; xpt_action((union ccb *)&cdai); if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); if (strcmp(old_physpath, sbuf_data(args->physpath)) != 0) { xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL); cdai.ccb_h.func_code = XPT_DEV_ADVINFO; cdai.buftype = CDAI_TYPE_PHYS_PATH; cdai.flags = CDAI_FLAG_STORE; cdai.bufsiz = sbuf_len(args->physpath); cdai.buf = sbuf_data(args->physpath); xpt_action((union ccb *)&cdai); if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); if (cdai.ccb_h.status == CAM_REQ_CMP) args->num_set++; } cam_periph_unlock(enc->periph); free(old_physpath, M_SCSIENC); } /** * \brief Set a device's physical path string in CAM XPT. * * \param enc SES instance containing elm * \param elm Element to publish physical path string for * \param iter Iterator whose state corresponds to elm * * \return 0 on success, errno otherwise. */ static int ses_set_physpath(enc_softc_t *enc, enc_element_t *elm, struct ses_iterator *iter) { struct ccb_dev_advinfo cdai; ses_setphyspath_callback_args_t args; int i, ret; struct sbuf sb; struct scsi_vpd_id_descriptor *idd; uint8_t *devid; ses_element_t *elmpriv; const char *c; ret = EIO; devid = NULL; /* * Assemble the components of the physical path starting with * the device ID of the enclosure itself. */ xpt_setup_ccb(&cdai.ccb_h, enc->periph->path, CAM_PRIORITY_NORMAL); cdai.ccb_h.func_code = XPT_DEV_ADVINFO; cdai.flags = CDAI_FLAG_NONE; cdai.buftype = CDAI_TYPE_SCSI_DEVID; cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN; cdai.buf = devid = malloc(cdai.bufsiz, M_SCSIENC, M_WAITOK|M_ZERO); cam_periph_lock(enc->periph); xpt_action((union ccb *)&cdai); if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); cam_periph_unlock(enc->periph); if (cdai.ccb_h.status != CAM_REQ_CMP) goto out; idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf, cdai.provsiz, scsi_devid_is_naa_ieee_reg); if (idd == NULL) goto out; if (sbuf_new(&sb, NULL, 128, SBUF_AUTOEXTEND) == NULL) { ret = ENOMEM; goto out; } /* Next, generate the physical path string */ sbuf_printf(&sb, "id1,enc@n%jx/type@%x/slot@%x", scsi_8btou64(idd->identifier), iter->type_index, iter->type_element_index); /* Append the element descriptor if one exists */ elmpriv = elm->elm_private; if (elmpriv->descr != NULL && elmpriv->descr_len > 0) { sbuf_cat(&sb, "/elmdesc@"); for (i = 0, c = elmpriv->descr; i < elmpriv->descr_len; i++, c++) { if (!isprint(*c) || isspace(*c) || *c == '/') sbuf_putc(&sb, '_'); else sbuf_putc(&sb, *c); } } sbuf_finish(&sb); /* * Set this physical path on any CAM devices with a device ID * descriptor that matches one created from the SES additional * status data for this element. */ args.physpath= &sb; args.num_set = 0; ses_paths_iter(enc, elm, ses_setphyspath_callback, &args); sbuf_delete(&sb); ret = args.num_set == 0 ? ENOENT : 0; out: if (devid != NULL) ENC_FREE(devid); return (ret); } /** * \brief Helper to set the CDB fields appropriately. * * \param cdb Buffer containing the cdb. * \param pagenum SES diagnostic page to query for. * \param dir Direction of query. */ static void ses_page_cdb(char *cdb, int bufsiz, SesDiagPageCodes pagenum, int dir) { /* Ref: SPC-4 r25 Section 6.20 Table 223 */ if (dir == CAM_DIR_IN) { cdb[0] = RECEIVE_DIAGNOSTIC; cdb[1] = 1; /* Set page code valid bit */ cdb[2] = pagenum; } else { cdb[0] = SEND_DIAGNOSTIC; cdb[1] = 0x10; cdb[2] = pagenum; } cdb[3] = bufsiz >> 8; /* high bits */ cdb[4] = bufsiz & 0xff; /* low bits */ cdb[5] = 0; } /** * \brief Discover whether this instance supports timed completion of a * RECEIVE DIAGNOSTIC RESULTS command requesting the Enclosure Status * page, and store the result in the softc, updating if necessary. * * \param enc SES instance to query and update. * \param tc_en Value of timed completion to set (see \return). * * \return 1 if timed completion enabled, 0 otherwise. */ static int ses_set_timed_completion(enc_softc_t *enc, uint8_t tc_en) { union ccb *ccb; struct cam_periph *periph; struct ses_mgmt_mode_page *mgmt; uint8_t *mode_buf; size_t mode_buf_len; ses_softc_t *ses; periph = enc->periph; ses = enc->enc_private; ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); mode_buf_len = sizeof(struct ses_mgmt_mode_page); mode_buf = ENC_MALLOCZ(mode_buf_len); if (mode_buf == NULL) goto out; scsi_mode_sense(&ccb->csio, /*retries*/4, NULL, MSG_SIMPLE_Q_TAG, /*dbd*/FALSE, SMS_PAGE_CTRL_CURRENT, SES_MGMT_MODE_PAGE_CODE, mode_buf, mode_buf_len, SSD_FULL_SIZE, /*timeout*/60 * 1000); /* * Ignore illegal request errors, as they are quite common and we * will print something out in that case anyway. */ cam_periph_runccb(ccb, enc_error, ENC_CFLAGS, ENC_FLAGS|SF_QUIET_IR, NULL); if (ccb->ccb_h.status != CAM_REQ_CMP) { ENC_VLOG(enc, "Timed Completion Unsupported\n"); goto release; } /* Skip the mode select if the desired value is already set */ mgmt = (struct ses_mgmt_mode_page *)mode_buf; if ((mgmt->byte5 & SES_MGMT_TIMED_COMP_EN) == tc_en) goto done; /* Value is not what we wanted, set it */ if (tc_en) mgmt->byte5 |= SES_MGMT_TIMED_COMP_EN; else mgmt->byte5 &= ~SES_MGMT_TIMED_COMP_EN; /* SES2r20: a completion time of zero means as long as possible */ bzero(&mgmt->max_comp_time, sizeof(mgmt->max_comp_time)); scsi_mode_select(&ccb->csio, 5, NULL, MSG_SIMPLE_Q_TAG, /*page_fmt*/FALSE, /*save_pages*/TRUE, mode_buf, mode_buf_len, SSD_FULL_SIZE, /*timeout*/60 * 1000); cam_periph_runccb(ccb, enc_error, ENC_CFLAGS, ENC_FLAGS, NULL); if (ccb->ccb_h.status != CAM_REQ_CMP) { ENC_VLOG(enc, "Timed Completion Set Failed\n"); goto release; } done: if ((mgmt->byte5 & SES_MGMT_TIMED_COMP_EN) != 0) { ENC_LOG(enc, "Timed Completion Enabled\n"); ses->ses_flags |= SES_FLAG_TIMEDCOMP; } else { ENC_LOG(enc, "Timed Completion Disabled\n"); ses->ses_flags &= ~SES_FLAG_TIMEDCOMP; } release: ENC_FREE(mode_buf); xpt_release_ccb(ccb); out: return (ses->ses_flags & SES_FLAG_TIMEDCOMP); } /** * \brief Process the list of supported pages and update flags. * * \param enc SES device to query. * \param buf Buffer containing the config page. * \param xfer_len Length of the config page in the buffer. * * \return 0 on success, errno otherwise. */ static int ses_process_pages(enc_softc_t *enc, struct enc_fsm_state *state, union ccb *ccb, uint8_t **bufp, int error, int xfer_len) { ses_softc_t *ses; struct scsi_diag_page *page; int err, i, length; CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE, ("entering %s(%p, %d)\n", __func__, bufp, xfer_len)); ses = enc->enc_private; err = -1; if (error != 0) { err = error; goto out; } if (xfer_len < sizeof(*page)) { ENC_VLOG(enc, "Unable to parse Diag Pages List Header\n"); err = EIO; goto out; } page = (struct scsi_diag_page *)*bufp; length = scsi_2btoul(page->length); if (length + offsetof(struct scsi_diag_page, params) > xfer_len) { ENC_VLOG(enc, "Diag Pages List Too Long\n"); goto out; } ENC_DLOG(enc, "%s: page length %d, xfer_len %d\n", __func__, length, xfer_len); err = 0; for (i = 0; i < length; i++) { if (page->params[i] == SesElementDescriptor) ses->ses_flags |= SES_FLAG_DESC; else if (page->params[i] == SesAddlElementStatus) ses->ses_flags |= SES_FLAG_ADDLSTATUS; } out: ENC_DLOG(enc, "%s: exiting with err %d\n", __func__, err); return (err); } /** * \brief Process the config page and update associated structures. * * \param enc SES device to query. * \param buf Buffer containing the config page. * \param xfer_len Length of the config page in the buffer. * * \return 0 on success, errno otherwise. */ static int ses_process_config(enc_softc_t *enc, struct enc_fsm_state *state, union ccb *ccb, uint8_t **bufp, int error, int xfer_len) { struct ses_iterator iter; ses_softc_t *ses; enc_cache_t *enc_cache; ses_cache_t *ses_cache; uint8_t *buf; int length; int err; int nelm; int ntype; struct ses_cfg_page *cfg_page; struct ses_enc_desc *buf_subenc; const struct ses_enc_desc **subencs; const struct ses_enc_desc **cur_subenc; const struct ses_enc_desc **last_subenc; ses_type_t *ses_types; ses_type_t *sestype; const struct ses_elm_type_desc *cur_buf_type; const struct ses_elm_type_desc *last_buf_type; uint8_t *last_valid_byte; enc_element_t *element; const char *type_text; CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE, ("entering %s(%p, %d)\n", __func__, bufp, xfer_len)); ses = enc->enc_private; enc_cache = &enc->enc_daemon_cache; ses_cache = enc_cache->private; buf = *bufp; err = -1; if (error != 0) { err = error; goto out; } if (xfer_len < sizeof(cfg_page->hdr)) { ENC_VLOG(enc, "Unable to parse SES Config Header\n"); err = EIO; goto out; } cfg_page = (struct ses_cfg_page *)buf; length = ses_page_length(&cfg_page->hdr); if (length > xfer_len) { ENC_VLOG(enc, "Enclosure Config Page Too Long\n"); goto out; } last_valid_byte = &buf[length - 1]; ENC_DLOG(enc, "%s: total page length %d, xfer_len %d\n", __func__, length, xfer_len); err = 0; if (ses_config_cache_valid(ses_cache, cfg_page->hdr.gen_code)) { /* Our cache is still valid. Proceed to fetching status. */ goto out; } /* Cache is no longer valid. Free old data to make way for new. */ ses_cache_free(enc, enc_cache); ENC_VLOG(enc, "Generation Code 0x%x has %d SubEnclosures\n", scsi_4btoul(cfg_page->hdr.gen_code), ses_cfg_page_get_num_subenc(cfg_page)); /* Take ownership of the buffer. */ ses_cache->cfg_page = cfg_page; *bufp = NULL; /* * Now waltz through all the subenclosures summing the number of * types available in each. */ subencs = malloc(ses_cfg_page_get_num_subenc(cfg_page) * sizeof(*subencs), M_SCSIENC, M_WAITOK|M_ZERO); /* * Sub-enclosure data is const after construction (i.e. when * accessed via our cache object. * * The cast here is not required in C++ but C99 is not so * sophisticated (see C99 6.5.16.1(1)). */ ses_cache->ses_nsubencs = ses_cfg_page_get_num_subenc(cfg_page); ses_cache->subencs = subencs; buf_subenc = cfg_page->subencs; cur_subenc = subencs; last_subenc = &subencs[ses_cache->ses_nsubencs - 1]; ntype = 0; while (cur_subenc <= last_subenc) { if (!ses_enc_desc_is_complete(buf_subenc, last_valid_byte)) { ENC_VLOG(enc, "Enclosure %d Beyond End of " "Descriptors\n", cur_subenc - subencs); err = EIO; goto out; } ENC_VLOG(enc, " SubEnclosure ID %d, %d Types With this ID, " "Descriptor Length %d, offset %d\n", buf_subenc->subenc_id, buf_subenc->num_types, buf_subenc->length, &buf_subenc->byte0 - buf); ENC_VLOG(enc, "WWN: %jx\n", (uintmax_t)scsi_8btou64(buf_subenc->logical_id)); ntype += buf_subenc->num_types; *cur_subenc = buf_subenc; cur_subenc++; buf_subenc = ses_enc_desc_next(buf_subenc); } /* Process the type headers. */ ses_types = malloc(ntype * sizeof(*ses_types), M_SCSIENC, M_WAITOK|M_ZERO); /* * Type data is const after construction (i.e. when accessed via * our cache object. */ ses_cache->ses_ntypes = ntype; ses_cache->ses_types = ses_types; cur_buf_type = (const struct ses_elm_type_desc *) (&(*last_subenc)->length + (*last_subenc)->length + 1); last_buf_type = cur_buf_type + ntype - 1; type_text = (const uint8_t *)(last_buf_type + 1); nelm = 0; sestype = ses_types; while (cur_buf_type <= last_buf_type) { if (&cur_buf_type->etype_txt_len > last_valid_byte) { ENC_VLOG(enc, "Runt Enclosure Type Header %d\n", sestype - ses_types); err = EIO; goto out; } sestype->hdr = cur_buf_type; sestype->text = type_text; type_text += cur_buf_type->etype_txt_len; ENC_VLOG(enc, " Type Desc[%d]: Type 0x%x, MaxElt %d, In Subenc " "%d, Text Length %d: %.*s\n", sestype - ses_types, sestype->hdr->etype_elm_type, sestype->hdr->etype_maxelt, sestype->hdr->etype_subenc, sestype->hdr->etype_txt_len, sestype->hdr->etype_txt_len, sestype->text); nelm += sestype->hdr->etype_maxelt + /*overall status element*/1; sestype++; cur_buf_type++; } /* Create the object map. */ enc_cache->elm_map = malloc(nelm * sizeof(enc_element_t), M_SCSIENC, M_WAITOK|M_ZERO); enc_cache->nelms = nelm; ses_iter_init(enc, enc_cache, &iter); while ((element = ses_iter_next(&iter)) != NULL) { const struct ses_elm_type_desc *thdr; ENC_DLOG(enc, "%s: checking obj %d(%d,%d)\n", __func__, iter.global_element_index, iter.type_index, nelm, iter.type_element_index); thdr = ses_cache->ses_types[iter.type_index].hdr; element->subenclosure = thdr->etype_subenc; element->enctype = thdr->etype_elm_type; element->overall_status_elem = iter.type_element_index == 0; element->elm_private = malloc(sizeof(ses_element_t), M_SCSIENC, M_WAITOK|M_ZERO); ENC_DLOG(enc, "%s: creating elmpriv %d(%d,%d) subenc %d " "type 0x%x\n", __func__, iter.global_element_index, iter.type_index, iter.type_element_index, thdr->etype_subenc, thdr->etype_elm_type); } err = 0; out: if (err) ses_cache_free(enc, enc_cache); else { ses_poll_status(enc); enc_update_request(enc, SES_PUBLISH_CACHE); } ENC_DLOG(enc, "%s: exiting with err %d\n", __func__, err); return (err); } /** * \brief Update the status page and associated structures. * * \param enc SES softc to update for. * \param buf Buffer containing the status page. * \param bufsz Amount of data in the buffer. * * \return 0 on success, errno otherwise. */ static int ses_process_status(enc_softc_t *enc, struct enc_fsm_state *state, union ccb *ccb, uint8_t **bufp, int error, int xfer_len) { struct ses_iterator iter; enc_element_t *element; ses_softc_t *ses; enc_cache_t *enc_cache; ses_cache_t *ses_cache; uint8_t *buf; int err = -1; int length; struct ses_status_page *page; union ses_status_element *cur_stat; union ses_status_element *last_stat; ses = enc->enc_private; enc_cache = &enc->enc_daemon_cache; ses_cache = enc_cache->private; buf = *bufp; ENC_DLOG(enc, "%s: enter (%p, %p, %d)\n", __func__, enc, buf, xfer_len); page = (struct ses_status_page *)buf; length = ses_page_length(&page->hdr); if (error != 0) { err = error; goto out; } /* * Make sure the length fits in the buffer. * * XXX all this means is that the page is larger than the space * we allocated. Since we use a statically sized buffer, this * could happen... Need to use dynamic discovery of the size. */ if (length > xfer_len) { ENC_VLOG(enc, "Enclosure Status Page Too Long\n"); goto out; } /* Check for simple enclosure reporting short enclosure status. */ if (length >= 4 && page->hdr.page_code == SesShortStatus) { ENC_DLOG(enc, "Got Short Enclosure Status page\n"); ses->ses_flags &= ~(SES_FLAG_ADDLSTATUS | SES_FLAG_DESC); ses_cache_free(enc, enc_cache); enc_cache->enc_status = page->hdr.page_specific_flags; enc_update_request(enc, SES_PUBLISH_CACHE); err = 0; goto out; } /* Make sure the length contains at least one header and status */ if (length < (sizeof(*page) + sizeof(*page->elements))) { ENC_VLOG(enc, "Enclosure Status Page Too Short\n"); goto out; } if (!ses_config_cache_valid(ses_cache, page->hdr.gen_code)) { ENC_DLOG(enc, "%s: Generation count change detected\n", __func__); enc_update_request(enc, SES_UPDATE_GETCONFIG); goto out; } ses_cache_free_status(enc, enc_cache); ses_cache->status_page = page; *bufp = NULL; enc_cache->enc_status = page->hdr.page_specific_flags; /* * Read in individual element status. The element order * matches the order reported in the config page (i.e. the * order of an unfiltered iteration of the config objects).. */ ses_iter_init(enc, enc_cache, &iter); cur_stat = page->elements; last_stat = (union ses_status_element *) &buf[length - sizeof(*last_stat)]; ENC_DLOG(enc, "%s: total page length %d, xfer_len %d\n", __func__, length, xfer_len); while (cur_stat <= last_stat && (element = ses_iter_next(&iter)) != NULL) { ENC_DLOG(enc, "%s: obj %d(%d,%d) off=0x%tx status=%jx\n", __func__, iter.global_element_index, iter.type_index, iter.type_element_index, (uint8_t *)cur_stat - buf, scsi_4btoul(cur_stat->bytes)); memcpy(&element->encstat, cur_stat, sizeof(element->encstat)); element->svalid = 1; cur_stat++; } if (ses_iter_next(&iter) != NULL) { ENC_VLOG(enc, "Status page, length insufficient for " "expected number of objects\n"); } else { if (cur_stat <= last_stat) ENC_VLOG(enc, "Status page, exhausted objects before " "exhausing page\n"); enc_update_request(enc, SES_PUBLISH_CACHE); err = 0; } out: ENC_DLOG(enc, "%s: exiting with error %d\n", __func__, err); return (err); } typedef enum { /** * The enclosure should not provide additional element * status for this element type in page 0x0A. * * \note This status is returned for any types not * listed SES3r02. Further types added in a * future specification will be incorrectly * classified. */ TYPE_ADDLSTATUS_NONE, /** * The element type provides additional element status * in page 0x0A. */ TYPE_ADDLSTATUS_MANDATORY, /** * The element type may provide additional element status * in page 0x0A, but i */ TYPE_ADDLSTATUS_OPTIONAL } ses_addlstatus_avail_t; /** * \brief Check to see whether a given type (as obtained via type headers) is * supported by the additional status command. * * \param enc SES softc to check. * \param typidx Type index to check for. * * \return An enumeration indicating if additional status is mandatory, * optional, or not required for this type. */ static ses_addlstatus_avail_t ses_typehasaddlstatus(enc_softc_t *enc, uint8_t typidx) { enc_cache_t *enc_cache; ses_cache_t *ses_cache; enc_cache = &enc->enc_daemon_cache; ses_cache = enc_cache->private; switch(ses_cache->ses_types[typidx].hdr->etype_elm_type) { case ELMTYP_DEVICE: case ELMTYP_ARRAY_DEV: case ELMTYP_SAS_EXP: return (TYPE_ADDLSTATUS_MANDATORY); case ELMTYP_SCSI_INI: case ELMTYP_SCSI_TGT: case ELMTYP_ESCC: return (TYPE_ADDLSTATUS_OPTIONAL); default: /* No additional status information available. */ break; } return (TYPE_ADDLSTATUS_NONE); } static int ses_get_elm_addlstatus_fc(enc_softc_t *, enc_cache_t *, uint8_t *, int); static int ses_get_elm_addlstatus_sas(enc_softc_t *, enc_cache_t *, uint8_t *, int, int, int, int); /** * \brief Parse the additional status element data for each object. * * \param enc The SES softc to update. * \param buf The buffer containing the additional status * element response. * \param xfer_len Size of the buffer. * * \return 0 on success, errno otherwise. */ static int ses_process_elm_addlstatus(enc_softc_t *enc, struct enc_fsm_state *state, union ccb *ccb, uint8_t **bufp, int error, int xfer_len) { struct ses_iterator iter, titer; int eip; int err; int ignore_index = 0; int length; int offset; enc_cache_t *enc_cache; ses_cache_t *ses_cache; uint8_t *buf; ses_element_t *elmpriv; const struct ses_page_hdr *hdr; enc_element_t *element, *telement; enc_cache = &enc->enc_daemon_cache; ses_cache = enc_cache->private; buf = *bufp; err = -1; if (error != 0) { err = error; goto out; } ses_cache_free_elm_addlstatus(enc, enc_cache); ses_cache->elm_addlstatus_page = (struct ses_addl_elem_status_page *)buf; *bufp = NULL; /* * The objects appear in the same order here as in Enclosure Status, * which itself is ordered by the Type Descriptors from the Config * page. However, it is necessary to skip elements that are not * supported by this page when counting them. */ hdr = &ses_cache->elm_addlstatus_page->hdr; length = ses_page_length(hdr); ENC_DLOG(enc, "Additional Element Status Page Length 0x%x\n", length); /* Make sure the length includes at least one header. */ if (length < sizeof(*hdr)+sizeof(struct ses_elm_addlstatus_base_hdr)) { ENC_VLOG(enc, "Runt Additional Element Status Page\n"); goto out; } if (length > xfer_len) { ENC_VLOG(enc, "Additional Element Status Page Too Long\n"); goto out; } if (!ses_config_cache_valid(ses_cache, hdr->gen_code)) { ENC_DLOG(enc, "%s: Generation count change detected\n", __func__); enc_update_request(enc, SES_UPDATE_GETCONFIG); goto out; } offset = sizeof(struct ses_page_hdr); ses_iter_init(enc, enc_cache, &iter); while (offset < length && (element = ses_iter_next(&iter)) != NULL) { struct ses_elm_addlstatus_base_hdr *elm_hdr; int proto_info_len; ses_addlstatus_avail_t status_type; /* * Additional element status is only provided for * individual elements (i.e. overal status elements * are excluded) and those of the types specified * in the SES spec. */ status_type = ses_typehasaddlstatus(enc, iter.type_index); if (iter.individual_element_index == ITERATOR_INDEX_INVALID || status_type == TYPE_ADDLSTATUS_NONE) continue; elm_hdr = (struct ses_elm_addlstatus_base_hdr *)&buf[offset]; eip = ses_elm_addlstatus_eip(elm_hdr); if (eip && !ignore_index) { struct ses_elm_addlstatus_eip_hdr *eip_hdr; int expected_index, index; ses_elem_index_type_t index_type; eip_hdr = (struct ses_elm_addlstatus_eip_hdr *)elm_hdr; if (eip_hdr->byte2 & SES_ADDL_EIP_EIIOE) { index_type = SES_ELEM_INDEX_GLOBAL; expected_index = iter.global_element_index; } else { index_type = SES_ELEM_INDEX_INDIVIDUAL; expected_index = iter.individual_element_index; } titer = iter; telement = ses_iter_seek_to(&titer, eip_hdr->element_index, index_type); if (telement != NULL && (ses_typehasaddlstatus(enc, titer.type_index) != TYPE_ADDLSTATUS_NONE || titer.type_index > ELMTYP_SAS_CONN)) { iter = titer; element = telement; } else ignore_index = 1; if (eip_hdr->byte2 & SES_ADDL_EIP_EIIOE) index = iter.global_element_index; else index = iter.individual_element_index; if (index > expected_index && status_type == TYPE_ADDLSTATUS_MANDATORY) { ENC_VLOG(enc, "%s: provided %s element" "index %d skips mandatory status " " element at index %d\n", __func__, (eip_hdr->byte2 & SES_ADDL_EIP_EIIOE) ? "global " : "", index, expected_index); } } elmpriv = element->elm_private; elmpriv->addl.hdr = elm_hdr; ENC_DLOG(enc, "%s: global element index=%d, type index=%d " "type element index=%d, offset=0x%x, " "byte0=0x%x, length=0x%x\n", __func__, iter.global_element_index, iter.type_index, iter.type_element_index, offset, elmpriv->addl.hdr->byte0, elmpriv->addl.hdr->length); /* Skip to after the length field */ offset += sizeof(struct ses_elm_addlstatus_base_hdr); /* Make sure the descriptor is within bounds */ if ((offset + elmpriv->addl.hdr->length) > length) { ENC_VLOG(enc, "Element %d Beyond End " "of Additional Element Status Descriptors\n", iter.global_element_index); break; } /* Advance to the protocol data, skipping eip bytes if needed */ offset += (eip * SES_EIP_HDR_EXTRA_LEN); proto_info_len = elmpriv->addl.hdr->length - (eip * SES_EIP_HDR_EXTRA_LEN); /* Errors in this block are ignored as they are non-fatal */ switch(ses_elm_addlstatus_proto(elmpriv->addl.hdr)) { case SPSP_PROTO_FC: if (elmpriv->addl.hdr->length == 0) break; ses_get_elm_addlstatus_fc(enc, enc_cache, &buf[offset], proto_info_len); break; case SPSP_PROTO_SAS: if (elmpriv->addl.hdr->length <= 2) break; ses_get_elm_addlstatus_sas(enc, enc_cache, &buf[offset], proto_info_len, eip, iter.type_index, iter.global_element_index); break; default: ENC_VLOG(enc, "Element %d: Unknown Additional Element " "Protocol 0x%x\n", iter.global_element_index, ses_elm_addlstatus_proto(elmpriv->addl.hdr)); break; } offset += proto_info_len; } err = 0; out: if (err) ses_cache_free_elm_addlstatus(enc, enc_cache); enc_update_request(enc, SES_PUBLISH_PHYSPATHS); enc_update_request(enc, SES_PUBLISH_CACHE); return (err); } static int ses_process_control_request(enc_softc_t *enc, struct enc_fsm_state *state, union ccb *ccb, uint8_t **bufp, int error, int xfer_len) { ses_softc_t *ses; ses = enc->enc_private; /* * Possible errors: * o Generation count wrong. * o Some SCSI status error. */ ses_terminate_control_requests(&ses->ses_pending_requests, error); ses_poll_status(enc); return (0); } static int ses_publish_physpaths(enc_softc_t *enc, struct enc_fsm_state *state, union ccb *ccb, uint8_t **bufp, int error, int xfer_len) { struct ses_iterator iter; enc_cache_t *enc_cache; enc_element_t *element; enc_cache = &enc->enc_daemon_cache; ses_iter_init(enc, enc_cache, &iter); while ((element = ses_iter_next(&iter)) != NULL) { /* * ses_set_physpath() returns success if we changed * the physpath of any element. This allows us to * only announce devices once regardless of how * many times we process additional element status. */ if (ses_set_physpath(enc, element, &iter) == 0) ses_print_addl_data(enc, element); } return (0); } static int ses_publish_cache(enc_softc_t *enc, struct enc_fsm_state *state, union ccb *ccb, uint8_t **bufp, int error, int xfer_len) { sx_xlock(&enc->enc_cache_lock); ses_cache_clone(enc, /*src*/&enc->enc_daemon_cache, /*dst*/&enc->enc_cache); sx_xunlock(&enc->enc_cache_lock); return (0); } /** * \brief Parse the descriptors for each object. * * \param enc The SES softc to update. * \param buf The buffer containing the descriptor list response. * \param xfer_len Size of the buffer. * * \return 0 on success, errno otherwise. */ static int ses_process_elm_descs(enc_softc_t *enc, struct enc_fsm_state *state, union ccb *ccb, uint8_t **bufp, int error, int xfer_len) { ses_softc_t *ses; struct ses_iterator iter; enc_element_t *element; int err; int offset; u_long length, plength; enc_cache_t *enc_cache; ses_cache_t *ses_cache; uint8_t *buf; ses_element_t *elmpriv; const struct ses_page_hdr *phdr; const struct ses_elm_desc_hdr *hdr; ses = enc->enc_private; enc_cache = &enc->enc_daemon_cache; ses_cache = enc_cache->private; buf = *bufp; err = -1; if (error != 0) { err = error; goto out; } ses_cache_free_elm_descs(enc, enc_cache); ses_cache->elm_descs_page = (struct ses_elem_descr_page *)buf; *bufp = NULL; phdr = &ses_cache->elm_descs_page->hdr; plength = ses_page_length(phdr); if (xfer_len < sizeof(struct ses_page_hdr)) { ENC_VLOG(enc, "Runt Element Descriptor Page\n"); goto out; } if (plength > xfer_len) { ENC_VLOG(enc, "Element Descriptor Page Too Long\n"); goto out; } if (!ses_config_cache_valid(ses_cache, phdr->gen_code)) { ENC_VLOG(enc, "%s: Generation count change detected\n", __func__); enc_update_request(enc, SES_UPDATE_GETCONFIG); goto out; } offset = sizeof(struct ses_page_hdr); ses_iter_init(enc, enc_cache, &iter); while (offset < plength && (element = ses_iter_next(&iter)) != NULL) { if ((offset + sizeof(struct ses_elm_desc_hdr)) > plength) { ENC_VLOG(enc, "Element %d Descriptor Header Past " "End of Buffer\n", iter.global_element_index); goto out; } hdr = (struct ses_elm_desc_hdr *)&buf[offset]; length = scsi_2btoul(hdr->length); ENC_DLOG(enc, "%s: obj %d(%d,%d) length=%d off=%d\n", __func__, iter.global_element_index, iter.type_index, iter.type_element_index, length, offset); if ((offset + sizeof(*hdr) + length) > plength) { ENC_VLOG(enc, "Element%d Descriptor Past " "End of Buffer\n", iter.global_element_index); goto out; } offset += sizeof(*hdr); if (length > 0) { elmpriv = element->elm_private; elmpriv->descr_len = length; elmpriv->descr = &buf[offset]; } /* skip over the descriptor itself */ offset += length; } err = 0; out: if (err == 0) { if (ses->ses_flags & SES_FLAG_ADDLSTATUS) enc_update_request(enc, SES_UPDATE_GETELMADDLSTATUS); } enc_update_request(enc, SES_PUBLISH_CACHE); return (err); } static int ses_fill_rcv_diag_io(enc_softc_t *enc, struct enc_fsm_state *state, union ccb *ccb, uint8_t *buf) { if (enc->enc_type == ENC_SEMB_SES) { semb_receive_diagnostic_results(&ccb->ataio, /*retries*/5, NULL, MSG_SIMPLE_Q_TAG, /*pcv*/1, state->page_code, buf, state->buf_size, state->timeout); } else { scsi_receive_diagnostic_results(&ccb->csio, /*retries*/5, NULL, MSG_SIMPLE_Q_TAG, /*pcv*/1, state->page_code, buf, state->buf_size, SSD_FULL_SIZE, state->timeout); } return (0); } /** * \brief Encode the object status into the response buffer, which is * expected to contain the current enclosure status. This function * turns off all the 'select' bits for the objects except for the * object specified, then sends it back to the enclosure. * * \param enc SES enclosure the change is being applied to. * \param buf Buffer containing the current enclosure status response. * \param amt Length of the response in the buffer. * \param req The control request to be applied to buf. * * \return 0 on success, errno otherwise. */ static int ses_encode(enc_softc_t *enc, uint8_t *buf, int amt, ses_control_request_t *req) { struct ses_iterator iter; enc_element_t *element; int offset; struct ses_control_page_hdr *hdr; ses_iter_init(enc, &enc->enc_cache, &iter); hdr = (struct ses_control_page_hdr *)buf; if (req->elm_idx == -1) { /* for enclosure status, at least 2 bytes are needed */ if (amt < 2) return EIO; hdr->control_flags = req->elm_stat.comstatus & SES_SET_STATUS_MASK; ENC_DLOG(enc, "Set EncStat %x\n", hdr->control_flags); return (0); } element = ses_iter_seek_to(&iter, req->elm_idx, SES_ELEM_INDEX_GLOBAL); if (element == NULL) return (ENXIO); /* * Seek to the type set that corresponds to the requested object. * The +1 is for the overall status element for the type. */ offset = sizeof(struct ses_control_page_hdr) + (iter.global_element_index * sizeof(struct ses_comstat)); /* Check for buffer overflow. */ if (offset + sizeof(struct ses_comstat) > amt) return (EIO); /* Set the status. */ memcpy(&buf[offset], &req->elm_stat, sizeof(struct ses_comstat)); ENC_DLOG(enc, "Set Type 0x%x Obj 0x%x (offset %d) with %x %x %x %x\n", iter.type_index, iter.global_element_index, offset, req->elm_stat.comstatus, req->elm_stat.comstat[0], req->elm_stat.comstat[1], req->elm_stat.comstat[2]); return (0); } static int ses_fill_control_request(enc_softc_t *enc, struct enc_fsm_state *state, union ccb *ccb, uint8_t *buf) { ses_softc_t *ses; enc_cache_t *enc_cache; ses_cache_t *ses_cache; struct ses_control_page_hdr *hdr; ses_control_request_t *req; size_t plength; size_t offset; ses = enc->enc_private; enc_cache = &enc->enc_daemon_cache; ses_cache = enc_cache->private; hdr = (struct ses_control_page_hdr *)buf; if (ses_cache->status_page == NULL) { ses_terminate_control_requests(&ses->ses_requests, EIO); return (EIO); } plength = ses_page_length(&ses_cache->status_page->hdr); memcpy(buf, ses_cache->status_page, plength); /* Disable the select bits in all status entries. */ offset = sizeof(struct ses_control_page_hdr); for (offset = sizeof(struct ses_control_page_hdr); offset < plength; offset += sizeof(struct ses_comstat)) { buf[offset] &= ~SESCTL_CSEL; } /* And make sure the INVOP bit is clear. */ hdr->control_flags &= ~SES_ENCSTAT_INVOP; /* Apply incoming requests. */ while ((req = TAILQ_FIRST(&ses->ses_requests)) != NULL) { TAILQ_REMOVE(&ses->ses_requests, req, links); req->result = ses_encode(enc, buf, plength, req); if (req->result != 0) { wakeup(req); continue; } TAILQ_INSERT_TAIL(&ses->ses_pending_requests, req, links); } if (TAILQ_EMPTY(&ses->ses_pending_requests) != 0) return (ENOENT); /* Fill out the ccb */ if (enc->enc_type == ENC_SEMB_SES) { semb_send_diagnostic(&ccb->ataio, /*retries*/5, NULL, MSG_SIMPLE_Q_TAG, buf, ses_page_length(&ses_cache->status_page->hdr), state->timeout); } else { scsi_send_diagnostic(&ccb->csio, /*retries*/5, NULL, MSG_SIMPLE_Q_TAG, /*unit_offline*/0, /*device_offline*/0, /*self_test*/0, /*page_format*/1, /*self_test_code*/0, buf, ses_page_length(&ses_cache->status_page->hdr), SSD_FULL_SIZE, state->timeout); } return (0); } static int ses_get_elm_addlstatus_fc(enc_softc_t *enc, enc_cache_t *enc_cache, uint8_t *buf, int bufsiz) { ENC_VLOG(enc, "FC Device Support Stubbed in Additional Status Page\n"); return (ENODEV); } #define SES_PRINT_PORTS(p, type) do { \ sbuf_printf(sbp, " %s(", type); \ if (((p) & SES_SASOBJ_DEV_PHY_PROTOMASK) == 0) \ sbuf_printf(sbp, " None"); \ else { \ if ((p) & SES_SASOBJ_DEV_PHY_SMP) \ sbuf_printf(sbp, " SMP"); \ if ((p) & SES_SASOBJ_DEV_PHY_STP) \ sbuf_printf(sbp, " STP"); \ if ((p) & SES_SASOBJ_DEV_PHY_SSP) \ sbuf_printf(sbp, " SSP"); \ } \ sbuf_printf(sbp, " )"); \ } while(0) /** * \brief Print the additional element status data for this object, for SAS * type 0 objects. See SES2 r20 Section 6.1.13.3.2. * * \param sesname SES device name associated with the object. * \param sbp Sbuf to print to. * \param obj The object to print the data for. * \param periph_name Peripheral string associated with the object. */ static void ses_print_addl_data_sas_type0(char *sesname, struct sbuf *sbp, enc_element_t *obj, char *periph_name) { int i; ses_element_t *elmpriv; struct ses_addl_status *addl; struct ses_elm_sas_device_phy *phy; elmpriv = obj->elm_private; addl = &(elmpriv->addl); if (addl->proto_hdr.sas == NULL) return; sbuf_printf(sbp, "%s: %s: SAS Device Slot Element:", sesname, periph_name); sbuf_printf(sbp, " %d Phys", addl->proto_hdr.sas->base_hdr.num_phys); if (ses_elm_addlstatus_eip(addl->hdr)) sbuf_printf(sbp, " at Slot %d", addl->proto_hdr.sas->type0_eip.dev_slot_num); if (ses_elm_sas_type0_not_all_phys(addl->proto_hdr.sas)) sbuf_printf(sbp, ", Not All Phys"); sbuf_printf(sbp, "\n"); if (addl->proto_data.sasdev_phys == NULL) return; for (i = 0;i < addl->proto_hdr.sas->base_hdr.num_phys;i++) { phy = &addl->proto_data.sasdev_phys[i]; sbuf_printf(sbp, "%s: phy %d:", sesname, i); if (ses_elm_sas_dev_phy_sata_dev(phy)) /* Spec says all other fields are specific values */ sbuf_printf(sbp, " SATA device\n"); else { sbuf_printf(sbp, " SAS device type %d id %d\n", ses_elm_sas_dev_phy_dev_type(phy), phy->phy_id); sbuf_printf(sbp, "%s: phy %d: protocols:", sesname, i); SES_PRINT_PORTS(phy->initiator_ports, "Initiator"); SES_PRINT_PORTS(phy->target_ports, "Target"); sbuf_printf(sbp, "\n"); } sbuf_printf(sbp, "%s: phy %d: parent %jx addr %jx\n", sesname, i, (uintmax_t)scsi_8btou64(phy->parent_addr), (uintmax_t)scsi_8btou64(phy->phy_addr)); } } #undef SES_PRINT_PORTS /** * \brief Report whether a given enclosure object is an expander. * * \param enc SES softc associated with object. * \param obj Enclosure object to report for. * * \return 1 if true, 0 otherwise. */ static int ses_obj_is_expander(enc_softc_t *enc, enc_element_t *obj) { return (obj->enctype == ELMTYP_SAS_EXP); } /** * \brief Print the additional element status data for this object, for SAS * type 1 objects. See SES2 r20 Sections 6.1.13.3.3 and 6.1.13.3.4. * * \param enc SES enclosure, needed for type identification. * \param sesname SES device name associated with the object. * \param sbp Sbuf to print to. * \param obj The object to print the data for. * \param periph_name Peripheral string associated with the object. */ static void ses_print_addl_data_sas_type1(enc_softc_t *enc, char *sesname, struct sbuf *sbp, enc_element_t *obj, char *periph_name) { int i, num_phys; ses_element_t *elmpriv; struct ses_addl_status *addl; struct ses_elm_sas_expander_phy *exp_phy; struct ses_elm_sas_port_phy *port_phy; elmpriv = obj->elm_private; addl = &(elmpriv->addl); if (addl->proto_hdr.sas == NULL) return; sbuf_printf(sbp, "%s: %s: SAS ", sesname, periph_name); if (ses_obj_is_expander(enc, obj)) { num_phys = addl->proto_hdr.sas->base_hdr.num_phys; sbuf_printf(sbp, "Expander: %d Phys", num_phys); if (addl->proto_data.sasexp_phys == NULL) return; for (i = 0;i < num_phys;i++) { exp_phy = &addl->proto_data.sasexp_phys[i]; sbuf_printf(sbp, "%s: phy %d: connector %d other %d\n", sesname, i, exp_phy->connector_index, exp_phy->other_index); } } else { num_phys = addl->proto_hdr.sas->base_hdr.num_phys; sbuf_printf(sbp, "Port: %d Phys", num_phys); if (addl->proto_data.sasport_phys == NULL) return; for (i = 0;i < num_phys;i++) { port_phy = &addl->proto_data.sasport_phys[i]; sbuf_printf(sbp, "%s: phy %d: id %d connector %d other %d\n", sesname, i, port_phy->phy_id, port_phy->connector_index, port_phy->other_index); sbuf_printf(sbp, "%s: phy %d: addr %jx\n", sesname, i, (uintmax_t)scsi_8btou64(port_phy->phy_addr)); } } } /** * \brief Print the additional element status data for this object. * * \param enc SES softc associated with the object. * \param obj The object to print the data for. */ static void ses_print_addl_data(enc_softc_t *enc, enc_element_t *obj) { ses_element_t *elmpriv; struct ses_addl_status *addl; struct sbuf sesname, name, out; elmpriv = obj->elm_private; if (elmpriv == NULL) return; addl = &(elmpriv->addl); if (addl->hdr == NULL) return; sbuf_new(&sesname, NULL, 16, SBUF_AUTOEXTEND); sbuf_new(&name, NULL, 16, SBUF_AUTOEXTEND); sbuf_new(&out, NULL, 512, SBUF_AUTOEXTEND); ses_paths_iter(enc, obj, ses_elmdevname_callback, &name); if (sbuf_len(&name) == 0) sbuf_printf(&name, "(none)"); sbuf_finish(&name); sbuf_printf(&sesname, "%s%d", enc->periph->periph_name, enc->periph->unit_number); sbuf_finish(&sesname); if (elmpriv->descr != NULL) sbuf_printf(&out, "%s: %s: Element descriptor: '%s'\n", sbuf_data(&sesname), sbuf_data(&name), elmpriv->descr); switch(ses_elm_addlstatus_proto(addl->hdr)) { case SPSP_PROTO_SAS: switch(ses_elm_sas_descr_type(addl->proto_hdr.sas)) { case SES_SASOBJ_TYPE_SLOT: ses_print_addl_data_sas_type0(sbuf_data(&sesname), &out, obj, sbuf_data(&name)); break; case SES_SASOBJ_TYPE_OTHER: ses_print_addl_data_sas_type1(enc, sbuf_data(&sesname), &out, obj, sbuf_data(&name)); break; default: break; } break; case SPSP_PROTO_FC: /* stubbed for now */ break; default: break; } sbuf_finish(&out); printf("%s", sbuf_data(&out)); sbuf_delete(&out); sbuf_delete(&name); sbuf_delete(&sesname); } /** * \brief Update the softc with the additional element status data for this * object, for SAS type 0 objects. * * \param enc SES softc to be updated. * \param buf The additional element status response buffer. * \param bufsiz Size of the response buffer. * \param eip The EIP bit value. * \param nobj Number of objects attached to the SES softc. * * \return 0 on success, errno otherwise. */ static int ses_get_elm_addlstatus_sas_type0(enc_softc_t *enc, enc_cache_t *enc_cache, uint8_t *buf, int bufsiz, int eip, int nobj) { int err, offset, physz; enc_element_t *obj; ses_element_t *elmpriv; struct ses_addl_status *addl; err = offset = 0; /* basic object setup */ obj = &(enc_cache->elm_map[nobj]); elmpriv = obj->elm_private; addl = &(elmpriv->addl); addl->proto_hdr.sas = (union ses_elm_sas_hdr *)&buf[offset]; /* Don't assume this object has any phys */ bzero(&addl->proto_data, sizeof(addl->proto_data)); if (addl->proto_hdr.sas->base_hdr.num_phys == 0) goto out; /* Skip forward to the phy list */ if (eip) offset += sizeof(struct ses_elm_sas_type0_eip_hdr); else offset += sizeof(struct ses_elm_sas_type0_base_hdr); /* Make sure the phy list fits in the buffer */ physz = addl->proto_hdr.sas->base_hdr.num_phys; physz *= sizeof(struct ses_elm_sas_device_phy); if (physz > (bufsiz - offset + 4)) { ENC_VLOG(enc, "Element %d Device Phy List Beyond End Of Buffer\n", nobj); err = EIO; goto out; } /* Point to the phy list */ addl->proto_data.sasdev_phys = (struct ses_elm_sas_device_phy *)&buf[offset]; out: return (err); } /** * \brief Update the softc with the additional element status data for this * object, for SAS type 1 objects. * * \param enc SES softc to be updated. * \param buf The additional element status response buffer. * \param bufsiz Size of the response buffer. * \param eip The EIP bit value. * \param nobj Number of objects attached to the SES softc. * * \return 0 on success, errno otherwise. */ static int ses_get_elm_addlstatus_sas_type1(enc_softc_t *enc, enc_cache_t *enc_cache, uint8_t *buf, int bufsiz, int eip, int nobj) { int err, offset, physz; enc_element_t *obj; ses_element_t *elmpriv; struct ses_addl_status *addl; err = offset = 0; /* basic object setup */ obj = &(enc_cache->elm_map[nobj]); elmpriv = obj->elm_private; addl = &(elmpriv->addl); addl->proto_hdr.sas = (union ses_elm_sas_hdr *)&buf[offset]; /* Don't assume this object has any phys */ bzero(&addl->proto_data, sizeof(addl->proto_data)); if (addl->proto_hdr.sas->base_hdr.num_phys == 0) goto out; /* Process expanders differently from other type1 cases */ if (ses_obj_is_expander(enc, obj)) { offset += sizeof(struct ses_elm_sas_type1_expander_hdr); physz = addl->proto_hdr.sas->base_hdr.num_phys * sizeof(struct ses_elm_sas_expander_phy); if (physz > (bufsiz - offset)) { ENC_VLOG(enc, "Element %d: Expander Phy List Beyond " "End Of Buffer\n", nobj); err = EIO; goto out; } addl->proto_data.sasexp_phys = (struct ses_elm_sas_expander_phy *)&buf[offset]; } else { offset += sizeof(struct ses_elm_sas_type1_nonexpander_hdr); physz = addl->proto_hdr.sas->base_hdr.num_phys * sizeof(struct ses_elm_sas_port_phy); if (physz > (bufsiz - offset + 4)) { ENC_VLOG(enc, "Element %d: Port Phy List Beyond End " "Of Buffer\n", nobj); err = EIO; goto out; } addl->proto_data.sasport_phys = (struct ses_elm_sas_port_phy *)&buf[offset]; } out: return (err); } /** * \brief Update the softc with the additional element status data for this * object, for SAS objects. * * \param enc SES softc to be updated. * \param buf The additional element status response buffer. * \param bufsiz Size of the response buffer. * \param eip The EIP bit value. * \param tidx Type index for this object. * \param nobj Number of objects attached to the SES softc. * * \return 0 on success, errno otherwise. */ static int ses_get_elm_addlstatus_sas(enc_softc_t *enc, enc_cache_t *enc_cache, uint8_t *buf, int bufsiz, int eip, int tidx, int nobj) { int dtype, err; ses_cache_t *ses_cache; union ses_elm_sas_hdr *hdr; /* Need to be able to read the descriptor type! */ if (bufsiz < sizeof(union ses_elm_sas_hdr)) { err = EIO; goto out; } ses_cache = enc_cache->private; hdr = (union ses_elm_sas_hdr *)buf; dtype = ses_elm_sas_descr_type(hdr); switch(dtype) { case SES_SASOBJ_TYPE_SLOT: switch(ses_cache->ses_types[tidx].hdr->etype_elm_type) { case ELMTYP_DEVICE: case ELMTYP_ARRAY_DEV: break; default: ENC_VLOG(enc, "Element %d has Additional Status type 0, " "invalid for SES element type 0x%x\n", nobj, ses_cache->ses_types[tidx].hdr->etype_elm_type); err = ENODEV; goto out; } err = ses_get_elm_addlstatus_sas_type0(enc, enc_cache, buf, bufsiz, eip, nobj); break; case SES_SASOBJ_TYPE_OTHER: switch(ses_cache->ses_types[tidx].hdr->etype_elm_type) { case ELMTYP_SAS_EXP: case ELMTYP_SCSI_INI: case ELMTYP_SCSI_TGT: case ELMTYP_ESCC: break; default: ENC_VLOG(enc, "Element %d has Additional Status type 1, " "invalid for SES element type 0x%x\n", nobj, ses_cache->ses_types[tidx].hdr->etype_elm_type); err = ENODEV; goto out; } err = ses_get_elm_addlstatus_sas_type1(enc, enc_cache, buf, bufsiz, eip, nobj); break; default: ENC_VLOG(enc, "Element %d of type 0x%x has Additional Status " "of unknown type 0x%x\n", nobj, ses_cache->ses_types[tidx].hdr->etype_elm_type, dtype); err = ENODEV; break; } out: return (err); } static void ses_softc_invalidate(enc_softc_t *enc) { ses_softc_t *ses; ses = enc->enc_private; ses_terminate_control_requests(&ses->ses_requests, ENXIO); } static void ses_softc_cleanup(enc_softc_t *enc) { ses_cache_free(enc, &enc->enc_cache); ses_cache_free(enc, &enc->enc_daemon_cache); ENC_FREE_AND_NULL(enc->enc_private); ENC_FREE_AND_NULL(enc->enc_cache.private); ENC_FREE_AND_NULL(enc->enc_daemon_cache.private); } static int ses_init_enc(enc_softc_t *enc) { return (0); } static int ses_get_enc_status(enc_softc_t *enc, int slpflag) { /* Automatically updated, caller checks enc_cache->encstat itself */ return (0); } static int ses_set_enc_status(enc_softc_t *enc, uint8_t encstat, int slpflag) { ses_control_request_t req; ses_softc_t *ses; ses = enc->enc_private; req.elm_idx = SES_SETSTATUS_ENC_IDX; req.elm_stat.comstatus = encstat & 0xf; TAILQ_INSERT_TAIL(&ses->ses_requests, &req, links); enc_update_request(enc, SES_PROCESS_CONTROL_REQS); cam_periph_sleep(enc->periph, &req, PUSER, "encstat", 0); return (req.result); } static int ses_get_elm_status(enc_softc_t *enc, encioc_elm_status_t *elms, int slpflag) { unsigned int i = elms->elm_idx; memcpy(elms->cstat, &enc->enc_cache.elm_map[i].encstat, 4); return (0); } static int ses_set_elm_status(enc_softc_t *enc, encioc_elm_status_t *elms, int slpflag) { ses_control_request_t req; ses_softc_t *ses; /* If this is clear, we don't do diddly. */ if ((elms->cstat[0] & SESCTL_CSEL) == 0) return (0); ses = enc->enc_private; req.elm_idx = elms->elm_idx; memcpy(&req.elm_stat, elms->cstat, sizeof(req.elm_stat)); TAILQ_INSERT_TAIL(&ses->ses_requests, &req, links); enc_update_request(enc, SES_PROCESS_CONTROL_REQS); cam_periph_sleep(enc->periph, &req, PUSER, "encstat", 0); return (req.result); } static int ses_get_elm_desc(enc_softc_t *enc, encioc_elm_desc_t *elmd) { int i = (int)elmd->elm_idx; ses_element_t *elmpriv; /* Assume caller has already checked obj_id validity */ elmpriv = enc->enc_cache.elm_map[i].elm_private; /* object might not have a descriptor */ if (elmpriv == NULL || elmpriv->descr == NULL) { elmd->elm_desc_len = 0; return (0); } if (elmd->elm_desc_len > elmpriv->descr_len) elmd->elm_desc_len = elmpriv->descr_len; copyout(elmpriv->descr, elmd->elm_desc_str, elmd->elm_desc_len); return (0); } /** * \brief Respond to ENCIOC_GETELMDEVNAME, providing a device name for the * given object id if one is available. * * \param enc SES softc to examine. * \param objdn ioctl structure to read/write device name info. * * \return 0 on success, errno otherwise. */ static int ses_get_elm_devnames(enc_softc_t *enc, encioc_elm_devnames_t *elmdn) { struct sbuf sb; int len; len = elmdn->elm_names_size; if (len < 0) return (EINVAL); cam_periph_unlock(enc->periph); sbuf_new(&sb, NULL, len, SBUF_FIXEDLEN); ses_paths_iter(enc, &enc->enc_cache.elm_map[elmdn->elm_idx], ses_elmdevname_callback, &sb); sbuf_finish(&sb); elmdn->elm_names_len = sbuf_len(&sb); copyout(sbuf_data(&sb), elmdn->elm_devnames, elmdn->elm_names_len + 1); sbuf_delete(&sb); cam_periph_lock(enc->periph); return (elmdn->elm_names_len > 0 ? 0 : ENODEV); } /** * \brief Send a string to the primary subenclosure using the String Out * SES diagnostic page. * * \param enc SES enclosure to run the command on. * \param sstr SES string structure to operate on * \param ioc Ioctl being performed * * \return 0 on success, errno otherwise. */ static int ses_handle_string(enc_softc_t *enc, encioc_string_t *sstr, int ioc) { ses_softc_t *ses; enc_cache_t *enc_cache; ses_cache_t *ses_cache; const struct ses_enc_desc *enc_desc; int amt, payload, ret; char cdb[6]; char str[32]; char vendor[9]; char product[17]; char rev[5]; uint8_t *buf; size_t size, rsize; ses = enc->enc_private; enc_cache = &enc->enc_daemon_cache; ses_cache = enc_cache->private; /* Implement SES2r20 6.1.6 */ if (sstr->bufsiz > 0xffff) return (EINVAL); /* buffer size too large */ if (ioc == ENCIOC_SETSTRING) { payload = sstr->bufsiz + 4; /* header for SEND DIAGNOSTIC */ amt = 0 - payload; buf = ENC_MALLOC(payload); if (buf == NULL) return ENOMEM; ses_page_cdb(cdb, payload, 0, CAM_DIR_OUT); /* Construct the page request */ buf[0] = SesStringOut; buf[1] = 0; buf[2] = sstr->bufsiz >> 8; buf[3] = sstr->bufsiz & 0xff; memcpy(&buf[4], sstr->buf, sstr->bufsiz); } else if (ioc == ENCIOC_GETSTRING) { payload = sstr->bufsiz; amt = payload; ses_page_cdb(cdb, payload, SesStringIn, CAM_DIR_IN); buf = sstr->buf; } else if (ioc == ENCIOC_GETENCNAME) { if (ses_cache->ses_nsubencs < 1) return (ENODEV); enc_desc = ses_cache->subencs[0]; cam_strvis(vendor, enc_desc->vendor_id, sizeof(enc_desc->vendor_id), sizeof(vendor)); cam_strvis(product, enc_desc->product_id, sizeof(enc_desc->product_id), sizeof(product)); cam_strvis(rev, enc_desc->product_rev, sizeof(enc_desc->product_rev), sizeof(rev)); rsize = snprintf(str, sizeof(str), "%s %s %s", vendor, product, rev) + 1; if (rsize > sizeof(str)) rsize = sizeof(str); copyout(&rsize, &sstr->bufsiz, sizeof(rsize)); size = rsize; if (size > sstr->bufsiz) size = sstr->bufsiz; copyout(str, sstr->buf, size); return (size == rsize ? 0 : ENOMEM); } else if (ioc == ENCIOC_GETENCID) { if (ses_cache->ses_nsubencs < 1) return (ENODEV); enc_desc = ses_cache->subencs[0]; rsize = snprintf(str, sizeof(str), "%16jx", scsi_8btou64(enc_desc->logical_id)) + 1; if (rsize > sizeof(str)) rsize = sizeof(str); copyout(&rsize, &sstr->bufsiz, sizeof(rsize)); size = rsize; if (size > sstr->bufsiz) size = sstr->bufsiz; copyout(str, sstr->buf, size); return (size == rsize ? 0 : ENOMEM); } else return EINVAL; ret = enc_runcmd(enc, cdb, 6, buf, &amt); if (ioc == ENCIOC_SETSTRING) ENC_FREE(buf); return ret; } /** * \invariant Called with cam_periph mutex held. */ static void ses_poll_status(enc_softc_t *enc) { ses_softc_t *ses; ses = enc->enc_private; enc_update_request(enc, SES_UPDATE_GETSTATUS); if (ses->ses_flags & SES_FLAG_DESC) enc_update_request(enc, SES_UPDATE_GETELMDESCS); if (ses->ses_flags & SES_FLAG_ADDLSTATUS) enc_update_request(enc, SES_UPDATE_GETELMADDLSTATUS); } /** * \brief Notification received when CAM detects a new device in the * SCSI domain in which this SEP resides. * * \param enc SES enclosure instance. */ static void ses_device_found(enc_softc_t *enc) { ses_poll_status(enc); enc_update_request(enc, SES_PUBLISH_PHYSPATHS); } static struct enc_vec ses_enc_vec = { .softc_invalidate = ses_softc_invalidate, .softc_cleanup = ses_softc_cleanup, .init_enc = ses_init_enc, .get_enc_status = ses_get_enc_status, .set_enc_status = ses_set_enc_status, .get_elm_status = ses_get_elm_status, .set_elm_status = ses_set_elm_status, .get_elm_desc = ses_get_elm_desc, .get_elm_devnames = ses_get_elm_devnames, .handle_string = ses_handle_string, .device_found = ses_device_found, .poll_status = ses_poll_status }; /** * \brief Initialize a new SES instance. * * \param enc SES softc structure to set up the instance in. * \param doinit Do the initialization (see main driver). * * \return 0 on success, errno otherwise. */ int ses_softc_init(enc_softc_t *enc) { ses_softc_t *ses_softc; CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE, ("entering enc_softc_init(%p)\n", enc)); enc->enc_vec = ses_enc_vec; enc->enc_fsm_states = enc_fsm_states; if (enc->enc_private == NULL) enc->enc_private = ENC_MALLOCZ(sizeof(ses_softc_t)); if (enc->enc_cache.private == NULL) enc->enc_cache.private = ENC_MALLOCZ(sizeof(ses_cache_t)); if (enc->enc_daemon_cache.private == NULL) enc->enc_daemon_cache.private = ENC_MALLOCZ(sizeof(ses_cache_t)); if (enc->enc_private == NULL || enc->enc_cache.private == NULL || enc->enc_daemon_cache.private == NULL) { ENC_FREE_AND_NULL(enc->enc_private); ENC_FREE_AND_NULL(enc->enc_cache.private); ENC_FREE_AND_NULL(enc->enc_daemon_cache.private); return (ENOMEM); } ses_softc = enc->enc_private; TAILQ_INIT(&ses_softc->ses_requests); TAILQ_INIT(&ses_softc->ses_pending_requests); enc_update_request(enc, SES_UPDATE_PAGES); // XXX: Move this to the FSM so it doesn't hang init if (0) (void) ses_set_timed_completion(enc, 1); return (0); }