/****************************************************************************** * * Module Name: aslmapoutput - Output/emit the resource descriptor/device maps * *****************************************************************************/ /* * Copyright (C) 2000 - 2015, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include #include #include #include "aslcompiler.y.h" #include #include #include #include /* This module used for application-level code only */ #define _COMPONENT ACPI_COMPILER ACPI_MODULE_NAME ("aslmapoutput") /* Local prototypes */ static void MpEmitGpioInfo ( void); static void MpEmitSerialInfo ( void); static void MpEmitDeviceTree ( void); static ACPI_STATUS MpEmitOneDevice ( ACPI_HANDLE ObjHandle, UINT32 NestingLevel, void *Context, void **ReturnValue); static void MpXrefDevices ( ACPI_GPIO_INFO *Info); static ACPI_STATUS MpNamespaceXrefBegin ( ACPI_PARSE_OBJECT *Op, UINT32 Level, void *Context); /* Strings used to decode flag bits */ const char *DirectionDecode[] = { "Both I/O ", "InputOnly ", "OutputOnly ", "Preserve " }; const char *PolarityDecode[] = { "ActiveHigh", "ActiveLow ", "ActiveBoth", "Reserved " }; /******************************************************************************* * * FUNCTION: MpEmitMappingInfo * * PARAMETERS: None * * RETURN: None * * DESCRIPTION: External interface. * Map file has already been opened. Emit all of the collected * hardware mapping information. Includes: GPIO information, * Serial information, and a dump of the entire ACPI device tree. * ******************************************************************************/ void MpEmitMappingInfo ( void) { /* Mapfile option enabled? */ if (!Gbl_MapfileFlag) { return; } if (!Gbl_GpioList) { FlPrintFile (ASL_FILE_MAP_OUTPUT, "\nNo GPIO devices found\n"); } if (!Gbl_SerialList) { FlPrintFile (ASL_FILE_MAP_OUTPUT, "\nNo Serial devices found (I2C/SPI/UART)\n"); } if (!Gbl_GpioList && !Gbl_SerialList) { return; } /* Headers */ FlPrintFile (ASL_FILE_MAP_OUTPUT, "\nResource Descriptor Connectivity Map\n"); FlPrintFile (ASL_FILE_MAP_OUTPUT, "------------------------------------\n"); /* Emit GPIO and Serial descriptors, then entire ACPI device tree */ MpEmitGpioInfo (); MpEmitSerialInfo (); MpEmitDeviceTree (); /* Clear the lists - no need to free memory here */ Gbl_SerialList = NULL; Gbl_GpioList = NULL; } /******************************************************************************* * * FUNCTION: MpEmitGpioInfo * * PARAMETERS: None * * RETURN: None * * DESCRIPTION: Emit the info about all GPIO devices found during the * compile or disassembly. * ******************************************************************************/ static void MpEmitGpioInfo ( void) { ACPI_GPIO_INFO *Info; char *Type; char *PrevDeviceName = NULL; const char *Direction; const char *Polarity; char *ParentPathname; const char *Description; char *HidString; const AH_DEVICE_ID *HidInfo; /* Walk the GPIO descriptor list */ Info = Gbl_GpioList; while (Info) { HidString = MpGetHidViaNamestring (Info->DeviceName); /* Print header info for the controller itself */ if (!PrevDeviceName || ACPI_STRCMP (PrevDeviceName, Info->DeviceName)) { FlPrintFile (ASL_FILE_MAP_OUTPUT, "\n\nGPIO Controller: %-8s %-28s", HidString, Info->DeviceName); HidInfo = AcpiAhMatchHardwareId (HidString); if (HidInfo) { FlPrintFile (ASL_FILE_MAP_OUTPUT, " // %s", HidInfo->Description); } FlPrintFile (ASL_FILE_MAP_OUTPUT, "\n\nPin Type Direction Polarity" " Dest _HID Destination\n"); } PrevDeviceName = Info->DeviceName; /* Setup various strings based upon the type (GpioInt or GpioIo) */ switch (Info->Type) { case AML_RESOURCE_GPIO_TYPE_INT: Type = "GpioInt"; Direction = "-Interrupt-"; Polarity = PolarityDecode[Info->Polarity]; break; case AML_RESOURCE_GPIO_TYPE_IO: Type = "GpioIo "; Direction = DirectionDecode[Info->Direction]; Polarity = " "; break; default: continue; } /* Emit the GPIO info */ FlPrintFile (ASL_FILE_MAP_OUTPUT, "%4.4X %s %s %s ", Info->PinNumber, Type, Direction, Polarity); ParentPathname = NULL; HidString = MpGetConnectionInfo (Info->Op, Info->PinIndex, &Info->TargetNode, &ParentPathname); if (HidString) { /* * This is a Connection() field * Attempt to find all references to the field. */ FlPrintFile (ASL_FILE_MAP_OUTPUT, "%8s %-28s", HidString, ParentPathname); MpXrefDevices (Info); } else { /* * For Devices, attempt to get the _HID description string. * Failing that (many _HIDs are not recognized), attempt to * get the _DDN description string. */ HidString = MpGetParentDeviceHid (Info->Op, &Info->TargetNode, &ParentPathname); FlPrintFile (ASL_FILE_MAP_OUTPUT, "%8s %-28s", HidString, ParentPathname); /* Get the _HID description or _DDN string */ HidInfo = AcpiAhMatchHardwareId (HidString); if (HidInfo) { FlPrintFile (ASL_FILE_MAP_OUTPUT, " // %s", HidInfo->Description); } else if ((Description = MpGetDdnValue (ParentPathname))) { FlPrintFile (ASL_FILE_MAP_OUTPUT, " // %s (_DDN)", Description); } } FlPrintFile (ASL_FILE_MAP_OUTPUT, "\n"); ACPI_FREE (ParentPathname); Info = Info->Next; } } /******************************************************************************* * * FUNCTION: MpEmitSerialInfo * * PARAMETERS: None * * RETURN: None * * DESCRIPTION: Emit the info about all Serial devices found during the * compile or disassembly. * ******************************************************************************/ static void MpEmitSerialInfo ( void) { ACPI_SERIAL_INFO *Info; char *Type; char *ParentPathname; char *PrevDeviceName = NULL; char *HidString; const AH_DEVICE_ID *HidInfo; const char *Description; AML_RESOURCE *Resource; /* Walk the constructed serial descriptor list */ Info = Gbl_SerialList; while (Info) { Resource = Info->Resource; switch (Resource->CommonSerialBus.Type) { case AML_RESOURCE_I2C_SERIALBUSTYPE: Type = "I2C "; break; case AML_RESOURCE_SPI_SERIALBUSTYPE: Type = "SPI "; break; case AML_RESOURCE_UART_SERIALBUSTYPE: Type = "UART"; break; default: Type = "UNKN"; break; } HidString = MpGetHidViaNamestring (Info->DeviceName); /* Print header info for the controller itself */ if (!PrevDeviceName || ACPI_STRCMP (PrevDeviceName, Info->DeviceName)) { FlPrintFile (ASL_FILE_MAP_OUTPUT, "\n\n%s Controller: ", Type); FlPrintFile (ASL_FILE_MAP_OUTPUT, "%-8s %-28s", HidString, Info->DeviceName); HidInfo = AcpiAhMatchHardwareId (HidString); if (HidInfo) { FlPrintFile (ASL_FILE_MAP_OUTPUT, " // %s", HidInfo->Description); } FlPrintFile (ASL_FILE_MAP_OUTPUT, "\n\n"); FlPrintFile (ASL_FILE_MAP_OUTPUT, "Type Address Speed Dest _HID Destination\n"); } PrevDeviceName = Info->DeviceName; FlPrintFile (ASL_FILE_MAP_OUTPUT, "%s %4.4X %8.8X ", Type, Info->Address, Info->Speed); ParentPathname = NULL; HidString = MpGetConnectionInfo (Info->Op, 0, &Info->TargetNode, &ParentPathname); if (HidString) { /* * This is a Connection() field * Attempt to find all references to the field. */ FlPrintFile (ASL_FILE_MAP_OUTPUT, "%8s %-28s", HidString, ParentPathname); } else { /* Normal resource template */ HidString = MpGetParentDeviceHid (Info->Op, &Info->TargetNode, &ParentPathname); FlPrintFile (ASL_FILE_MAP_OUTPUT, "%8s %-28s", HidString, ParentPathname); /* Get the _HID description or _DDN string */ HidInfo = AcpiAhMatchHardwareId (HidString); if (HidInfo) { FlPrintFile (ASL_FILE_MAP_OUTPUT, " // %s", HidInfo->Description); } else if ((Description = MpGetDdnValue (ParentPathname))) { FlPrintFile (ASL_FILE_MAP_OUTPUT, " // %s (_DDN)", Description); } } FlPrintFile (ASL_FILE_MAP_OUTPUT, "\n"); ACPI_FREE (ParentPathname); Info = Info->Next; } } /******************************************************************************* * * FUNCTION: MpEmitDeviceTree * * PARAMETERS: None * * RETURN: None * * DESCRIPTION: Emit information about all devices within the ACPI namespace. * ******************************************************************************/ static void MpEmitDeviceTree ( void) { FlPrintFile (ASL_FILE_MAP_OUTPUT, "\n\nACPI Device Tree\n"); FlPrintFile (ASL_FILE_MAP_OUTPUT, "----------------\n\n"); FlPrintFile (ASL_FILE_MAP_OUTPUT, "Device Pathname " "_HID Description\n\n"); /* Walk the namespace from the root */ (void) AcpiNsWalkNamespace (ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, FALSE, MpEmitOneDevice, NULL, NULL, NULL); } /******************************************************************************* * * FUNCTION: MpEmitOneDevice * * PARAMETERS: ACPI_NAMESPACE_WALK callback * * RETURN: Status * * DESCRIPTION: Emit information about one ACPI device in the namespace. Used * during dump of all device objects within the namespace. * ******************************************************************************/ static ACPI_STATUS MpEmitOneDevice ( ACPI_HANDLE ObjHandle, UINT32 NestingLevel, void *Context, void **ReturnValue) { char *DevicePathname; char *DdnString; char *HidString; const AH_DEVICE_ID *HidInfo; /* Device pathname */ DevicePathname = AcpiNsGetExternalPathname ( ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, ObjHandle)); FlPrintFile (ASL_FILE_MAP_OUTPUT, "%-32s", DevicePathname); /* _HID or _DDN */ HidString = MpGetHidValue ( ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, ObjHandle)); FlPrintFile (ASL_FILE_MAP_OUTPUT, "%8s", HidString); HidInfo = AcpiAhMatchHardwareId (HidString); if (HidInfo) { FlPrintFile (ASL_FILE_MAP_OUTPUT, " // %s", HidInfo->Description); } else if ((DdnString = MpGetDdnValue (DevicePathname))) { FlPrintFile (ASL_FILE_MAP_OUTPUT, " // %s (_DDN)", DdnString); } FlPrintFile (ASL_FILE_MAP_OUTPUT, "\n"); ACPI_FREE (DevicePathname); return (AE_OK); } /******************************************************************************* * * FUNCTION: MpXrefDevices * * PARAMETERS: Info - A GPIO Info block * * RETURN: None * * DESCRIPTION: Cross-reference the parse tree and find all references to the * specified GPIO device. * ******************************************************************************/ static void MpXrefDevices ( ACPI_GPIO_INFO *Info) { /* Walk the entire parse tree */ TrWalkParseTree (RootNode, ASL_WALK_VISIT_DOWNWARD, MpNamespaceXrefBegin, NULL, Info); if (!Info->References) { FlPrintFile (ASL_FILE_MAP_OUTPUT, " // **** No references in table"); } } /******************************************************************************* * * FUNCTION: MpNamespaceXrefBegin * * PARAMETERS: WALK_PARSE_TREE callback * * RETURN: Status * * DESCRIPTION: Walk parse tree callback used to cross-reference GPIO pins. * ******************************************************************************/ static ACPI_STATUS MpNamespaceXrefBegin ( ACPI_PARSE_OBJECT *Op, UINT32 Level, void *Context) { ACPI_GPIO_INFO *Info = ACPI_CAST_PTR (ACPI_GPIO_INFO, Context); const ACPI_OPCODE_INFO *OpInfo; char *DevicePathname; ACPI_PARSE_OBJECT *ParentOp; char *HidString; ACPI_FUNCTION_TRACE_PTR (MpNamespaceXrefBegin, Op); /* * If this node is the actual declaration of a name * [such as the XXXX name in "Method (XXXX)"], * we are not interested in it here. We only care about names that * are references to other objects within the namespace and the * parent objects of name declarations */ if (Op->Asl.CompileFlags & NODE_IS_NAME_DECLARATION) { return (AE_OK); } /* We are only interested in opcodes that have an associated name */ OpInfo = AcpiPsGetOpcodeInfo (Op->Asl.AmlOpcode); if ((OpInfo->Flags & AML_NAMED) || (OpInfo->Flags & AML_CREATE)) { return (AE_OK); } if ((Op->Asl.ParseOpcode != PARSEOP_NAMESTRING) && (Op->Asl.ParseOpcode != PARSEOP_NAMESEG) && (Op->Asl.ParseOpcode != PARSEOP_METHODCALL)) { return (AE_OK); } if (!Op->Asl.Node) { return (AE_OK); } ParentOp = Op->Asl.Parent; if (ParentOp->Asl.ParseOpcode == PARSEOP_FIELD) { return (AE_OK); } if (Op->Asl.Node == Info->TargetNode) { while (ParentOp && (!ParentOp->Asl.Node)) { ParentOp = ParentOp->Asl.Parent; } if (ParentOp) { DevicePathname = AcpiNsGetExternalPathname ( ParentOp->Asl.Node); if (!Info->References) { FlPrintFile (ASL_FILE_MAP_OUTPUT, " // References:"); } HidString = MpGetHidViaNamestring (DevicePathname); FlPrintFile (ASL_FILE_MAP_OUTPUT, " %s [%s]", DevicePathname, HidString); Info->References++; ACPI_FREE (DevicePathname); } } return (AE_OK); }