/****************************************************************************** * * Module Name: exstore - AML Interpreter object store support * *****************************************************************************/ /* * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #define __EXSTORE_C__ #include #include #include #include #include #include #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME ("exstore") /* Local prototypes */ static ACPI_STATUS AcpiExStoreObjectToIndex ( ACPI_OPERAND_OBJECT *ValDesc, ACPI_OPERAND_OBJECT *DestDesc, ACPI_WALK_STATE *WalkState); /******************************************************************************* * * FUNCTION: AcpiExStore * * PARAMETERS: *SourceDesc - Value to be stored * *DestDesc - Where to store it. Must be an NS node * or an ACPI_OPERAND_OBJECT of type * Reference; * WalkState - Current walk state * * RETURN: Status * * DESCRIPTION: Store the value described by SourceDesc into the location * described by DestDesc. Called by various interpreter * functions to store the result of an operation into * the destination operand -- not just simply the actual "Store" * ASL operator. * ******************************************************************************/ ACPI_STATUS AcpiExStore ( ACPI_OPERAND_OBJECT *SourceDesc, ACPI_OPERAND_OBJECT *DestDesc, ACPI_WALK_STATE *WalkState) { ACPI_STATUS Status = AE_OK; ACPI_OPERAND_OBJECT *RefDesc = DestDesc; ACPI_FUNCTION_TRACE_PTR (ExStore, DestDesc); /* Validate parameters */ if (!SourceDesc || !DestDesc) { ACPI_ERROR ((AE_INFO, "Null parameter")); return_ACPI_STATUS (AE_AML_NO_OPERAND); } /* DestDesc can be either a namespace node or an ACPI object */ if (ACPI_GET_DESCRIPTOR_TYPE (DestDesc) == ACPI_DESC_TYPE_NAMED) { /* * Dest is a namespace node, * Storing an object into a Named node. */ Status = AcpiExStoreObjectToNode (SourceDesc, (ACPI_NAMESPACE_NODE *) DestDesc, WalkState, ACPI_IMPLICIT_CONVERSION); return_ACPI_STATUS (Status); } /* Destination object must be a Reference or a Constant object */ switch (DestDesc->Common.Type) { case ACPI_TYPE_LOCAL_REFERENCE: break; case ACPI_TYPE_INTEGER: /* Allow stores to Constants -- a Noop as per ACPI spec */ if (DestDesc->Common.Flags & AOPOBJ_AML_CONSTANT) { return_ACPI_STATUS (AE_OK); } /*lint -fallthrough */ default: /* Destination is not a Reference object */ ACPI_ERROR ((AE_INFO, "Target is not a Reference or Constant object - %s [%p]", AcpiUtGetObjectTypeName (DestDesc), DestDesc)); return_ACPI_STATUS (AE_AML_OPERAND_TYPE); } /* * Examine the Reference class. These cases are handled: * * 1) Store to Name (Change the object associated with a name) * 2) Store to an indexed area of a Buffer or Package * 3) Store to a Method Local or Arg * 4) Store to the debug object */ switch (RefDesc->Reference.Class) { case ACPI_REFCLASS_REFOF: /* Storing an object into a Name "container" */ Status = AcpiExStoreObjectToNode (SourceDesc, RefDesc->Reference.Object, WalkState, ACPI_IMPLICIT_CONVERSION); break; case ACPI_REFCLASS_INDEX: /* Storing to an Index (pointer into a packager or buffer) */ Status = AcpiExStoreObjectToIndex (SourceDesc, RefDesc, WalkState); break; case ACPI_REFCLASS_LOCAL: case ACPI_REFCLASS_ARG: /* Store to a method local/arg */ Status = AcpiDsStoreObjectToLocal (RefDesc->Reference.Class, RefDesc->Reference.Value, SourceDesc, WalkState); break; case ACPI_REFCLASS_DEBUG: /* * Storing to the Debug object causes the value stored to be * displayed and otherwise has no effect -- see ACPI Specification */ ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "**** Write to Debug Object: Object %p %s ****:\n\n", SourceDesc, AcpiUtGetObjectTypeName (SourceDesc))); ACPI_DEBUG_OBJECT (SourceDesc, 0, 0); break; default: ACPI_ERROR ((AE_INFO, "Unknown Reference Class 0x%2.2X", RefDesc->Reference.Class)); ACPI_DUMP_ENTRY (RefDesc, ACPI_LV_INFO); Status = AE_AML_INTERNAL; break; } return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExStoreObjectToIndex * * PARAMETERS: *SourceDesc - Value to be stored * *DestDesc - Named object to receive the value * WalkState - Current walk state * * RETURN: Status * * DESCRIPTION: Store the object to indexed Buffer or Package element * ******************************************************************************/ static ACPI_STATUS AcpiExStoreObjectToIndex ( ACPI_OPERAND_OBJECT *SourceDesc, ACPI_OPERAND_OBJECT *IndexDesc, ACPI_WALK_STATE *WalkState) { ACPI_STATUS Status = AE_OK; ACPI_OPERAND_OBJECT *ObjDesc; ACPI_OPERAND_OBJECT *NewDesc; UINT8 Value = 0; UINT32 i; ACPI_FUNCTION_TRACE (ExStoreObjectToIndex); /* * Destination must be a reference pointer, and * must point to either a buffer or a package */ switch (IndexDesc->Reference.TargetType) { case ACPI_TYPE_PACKAGE: /* * Storing to a package element. Copy the object and replace * any existing object with the new object. No implicit * conversion is performed. * * The object at *(IndexDesc->Reference.Where) is the * element within the package that is to be modified. * The parent package object is at IndexDesc->Reference.Object */ ObjDesc = *(IndexDesc->Reference.Where); if (SourceDesc->Common.Type == ACPI_TYPE_LOCAL_REFERENCE && SourceDesc->Reference.Class == ACPI_REFCLASS_TABLE) { /* This is a DDBHandle, just add a reference to it */ AcpiUtAddReference (SourceDesc); NewDesc = SourceDesc; } else { /* Normal object, copy it */ Status = AcpiUtCopyIobjectToIobject (SourceDesc, &NewDesc, WalkState); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } } if (ObjDesc) { /* Decrement reference count by the ref count of the parent package */ for (i = 0; i < ((ACPI_OPERAND_OBJECT *) IndexDesc->Reference.Object)->Common.ReferenceCount; i++) { AcpiUtRemoveReference (ObjDesc); } } *(IndexDesc->Reference.Where) = NewDesc; /* Increment ref count by the ref count of the parent package-1 */ for (i = 1; i < ((ACPI_OPERAND_OBJECT *) IndexDesc->Reference.Object)->Common.ReferenceCount; i++) { AcpiUtAddReference (NewDesc); } break; case ACPI_TYPE_BUFFER_FIELD: /* * Store into a Buffer or String (not actually a real BufferField) * at a location defined by an Index. * * The first 8-bit element of the source object is written to the * 8-bit Buffer location defined by the Index destination object, * according to the ACPI 2.0 specification. */ /* * Make sure the target is a Buffer or String. An error should * not happen here, since the ReferenceObject was constructed * by the INDEX_OP code. */ ObjDesc = IndexDesc->Reference.Object; if ((ObjDesc->Common.Type != ACPI_TYPE_BUFFER) && (ObjDesc->Common.Type != ACPI_TYPE_STRING)) { return_ACPI_STATUS (AE_AML_OPERAND_TYPE); } /* * The assignment of the individual elements will be slightly * different for each source type. */ switch (SourceDesc->Common.Type) { case ACPI_TYPE_INTEGER: /* Use the least-significant byte of the integer */ Value = (UINT8) (SourceDesc->Integer.Value); break; case ACPI_TYPE_BUFFER: case ACPI_TYPE_STRING: /* Note: Takes advantage of common string/buffer fields */ Value = SourceDesc->Buffer.Pointer[0]; break; default: /* All other types are invalid */ ACPI_ERROR ((AE_INFO, "Source must be Integer/Buffer/String type, not %s", AcpiUtGetObjectTypeName (SourceDesc))); return_ACPI_STATUS (AE_AML_OPERAND_TYPE); } /* Store the source value into the target buffer byte */ ObjDesc->Buffer.Pointer[IndexDesc->Reference.Value] = Value; break; default: ACPI_ERROR ((AE_INFO, "Target is not a Package or BufferField")); Status = AE_AML_OPERAND_TYPE; break; } return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExStoreObjectToNode * * PARAMETERS: SourceDesc - Value to be stored * Node - Named object to receive the value * WalkState - Current walk state * ImplicitConversion - Perform implicit conversion (yes/no) * * RETURN: Status * * DESCRIPTION: Store the object to the named object. * * The Assignment of an object to a named object is handled here * The value passed in will replace the current value (if any) * with the input value. * * When storing into an object the data is converted to the * target object type then stored in the object. This means * that the target object type (for an initialized target) will * not be changed by a store operation. * * Assumes parameters are already validated. * ******************************************************************************/ ACPI_STATUS AcpiExStoreObjectToNode ( ACPI_OPERAND_OBJECT *SourceDesc, ACPI_NAMESPACE_NODE *Node, ACPI_WALK_STATE *WalkState, UINT8 ImplicitConversion) { ACPI_STATUS Status = AE_OK; ACPI_OPERAND_OBJECT *TargetDesc; ACPI_OPERAND_OBJECT *NewDesc; ACPI_OBJECT_TYPE TargetType; ACPI_FUNCTION_TRACE_PTR (ExStoreObjectToNode, SourceDesc); /* Get current type of the node, and object attached to Node */ TargetType = AcpiNsGetType (Node); TargetDesc = AcpiNsGetAttachedObject (Node); ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Storing %p(%s) into node %p(%s)\n", SourceDesc, AcpiUtGetObjectTypeName (SourceDesc), Node, AcpiUtGetTypeName (TargetType))); /* * Resolve the source object to an actual value * (If it is a reference object) */ Status = AcpiExResolveObject (&SourceDesc, TargetType, WalkState); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } /* If no implicit conversion, drop into the default case below */ if ((!ImplicitConversion) || ((WalkState->Opcode == AML_COPY_OP) && (TargetType != ACPI_TYPE_LOCAL_REGION_FIELD) && (TargetType != ACPI_TYPE_LOCAL_BANK_FIELD) && (TargetType != ACPI_TYPE_LOCAL_INDEX_FIELD))) { /* * Force execution of default (no implicit conversion). Note: * CopyObject does not perform an implicit conversion, as per the ACPI * spec -- except in case of region/bank/index fields -- because these * objects must retain their original type permanently. */ TargetType = ACPI_TYPE_ANY; } /* Do the actual store operation */ switch (TargetType) { case ACPI_TYPE_BUFFER_FIELD: case ACPI_TYPE_LOCAL_REGION_FIELD: case ACPI_TYPE_LOCAL_BANK_FIELD: case ACPI_TYPE_LOCAL_INDEX_FIELD: /* For fields, copy the source data to the target field. */ Status = AcpiExWriteDataToField (SourceDesc, TargetDesc, &WalkState->ResultObj); break; case ACPI_TYPE_INTEGER: case ACPI_TYPE_STRING: case ACPI_TYPE_BUFFER: /* * These target types are all of type Integer/String/Buffer, and * therefore support implicit conversion before the store. * * Copy and/or convert the source object to a new target object */ Status = AcpiExStoreObjectToObject (SourceDesc, TargetDesc, &NewDesc, WalkState); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } if (NewDesc != TargetDesc) { /* * Store the new NewDesc as the new value of the Name, and set * the Name's type to that of the value being stored in it. * SourceDesc reference count is incremented by AttachObject. * * Note: This may change the type of the node if an explicit store * has been performed such that the node/object type has been * changed. */ Status = AcpiNsAttachObject (Node, NewDesc, NewDesc->Common.Type); ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Store %s into %s via Convert/Attach\n", AcpiUtGetObjectTypeName (SourceDesc), AcpiUtGetObjectTypeName (NewDesc))); } break; default: ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Storing %s (%p) directly into node (%p) with no implicit conversion\n", AcpiUtGetObjectTypeName (SourceDesc), SourceDesc, Node)); /* No conversions for all other types. Just attach the source object */ Status = AcpiNsAttachObject (Node, SourceDesc, SourceDesc->Common.Type); break; } return_ACPI_STATUS (Status); }