Command Line Interface for Zstandard library ============================================ Command Line Interface (CLI) can be created using the `make` command without any additional parameters. There are however other Makefile targets that create different variations of CLI: - `zstd` : default CLI supporting gzip-like arguments; includes dictionary builder, benchmark, and support for decompression of legacy zstd formats - `zstd_nolegacy` : Same as `zstd` but without support for legacy zstd formats - `zstd-small` : CLI optimized for minimal size; no dictionary builder, no benchmark, and no support for legacy zstd formats - `zstd-compress` : version of CLI which can only compress into zstd format - `zstd-decompress` : version of CLI which can only decompress zstd format #### Compilation variables `zstd` scope can be altered by modifying the following compilation variables : - __HAVE_THREAD__ : multithreading is automatically enabled when `pthread` is detected. It's possible to disable multithread support, by setting HAVE_THREAD=0 . Example : make zstd HAVE_THREAD=0 It's also possible to force compilation with multithread support, using HAVE_THREAD=1. In which case, linking stage will fail if `pthread` library cannot be found. This might be useful to prevent silent feature disabling. - __HAVE_ZLIB__ : `zstd` can compress and decompress files in `.gz` format. This is ordered through command `--format=gzip`. Alternatively, symlinks named `gzip` or `gunzip` will mimic intended behavior. `.gz` support is automatically enabled when `zlib` library is detected at build time. It's possible to disable `.gz` support, by setting HAVE_ZLIB=0. Example : make zstd HAVE_ZLIB=0 It's also possible to force compilation with zlib support, using HAVE_ZLIB=1. In which case, linking stage will fail if `zlib` library cannot be found. This might be useful to prevent silent feature disabling. - __HAVE_LZMA__ : `zstd` can compress and decompress files in `.xz` and `.lzma` formats. This is ordered through commands `--format=xz` and `--format=lzma` respectively. Alternatively, symlinks named `xz`, `unxz`, `lzma`, or `unlzma` will mimic intended behavior. `.xz` and `.lzma` support is automatically enabled when `lzma` library is detected at build time. It's possible to disable `.xz` and `.lzma` support, by setting HAVE_LZMA=0 . Example : make zstd HAVE_LZMA=0 It's also possible to force compilation with lzma support, using HAVE_LZMA=1. In which case, linking stage will fail if `lzma` library cannot be found. This might be useful to prevent silent feature disabling. - __HAVE_LZ4__ : `zstd` can compress and decompress files in `.lz4` formats. This is ordered through commands `--format=lz4`. Alternatively, symlinks named `lz4`, or `unlz4` will mimic intended behavior. `.lz4` support is automatically enabled when `lz4` library is detected at build time. It's possible to disable `.lz4` support, by setting HAVE_LZ4=0 . Example : make zstd HAVE_LZ4=0 It's also possible to force compilation with lz4 support, using HAVE_LZ4=1. In which case, linking stage will fail if `lz4` library cannot be found. This might be useful to prevent silent feature disabling. - __ZSTD_LEGACY_SUPPORT__ : `zstd` can decompress files compressed by older versions of `zstd`. Starting v0.8.0, all versions of `zstd` produce frames compliant with the [specification](../doc/zstd_compression_format.md), and are therefore compatible. But older versions (< v0.8.0) produced different, incompatible, frames. By default, `zstd` supports decoding legacy formats >= v0.4.0 (`ZSTD_LEGACY_SUPPORT=4`). This can be altered by modifying this compilation variable. `ZSTD_LEGACY_SUPPORT=1` means "support all formats >= v0.1.0". `ZSTD_LEGACY_SUPPORT=2` means "support all formats >= v0.2.0", and so on. `ZSTD_LEGACY_SUPPORT=0` means _DO NOT_ support any legacy format. if `ZSTD_LEGACY_SUPPORT >= 8`, it's the same as `0`, since there is no legacy format after `7`. Note : `zstd` only supports decoding older formats, and cannot generate any legacy format. #### Aggregation of parameters CLI supports aggregation of parameters i.e. `-b1`, `-e18`, and `-i1` can be joined into `-b1e18i1`. #### Dictionary builder in Command Line Interface Zstd offers a training mode, which can be used to tune the algorithm for a selected type of data, by providing it with a few samples. The result of the training is stored in a file selected with the `-o` option (default name is `dictionary`), which can be loaded before compression and decompression. Using a dictionary, the compression ratio achievable on small data improves dramatically. These compression gains are achieved while simultaneously providing faster compression and decompression speeds. Dictionary work if there is some correlation in a family of small data (there is no universal dictionary). Hence, deploying one dictionary per type of data will provide the greater benefits. Dictionary gains are mostly effective in the first few KB. Then, the compression algorithm will rely more and more on previously decoded content to compress the rest of the file. Usage of the dictionary builder and created dictionaries with CLI: 1. Create the dictionary : `zstd --train PathToTrainingSet/* -o dictionaryName` 2. Compress with the dictionary: `zstd FILE -D dictionaryName` 3. Decompress with the dictionary: `zstd --decompress FILE.zst -D dictionaryName` #### Benchmark in Command Line Interface CLI includes in-memory compression benchmark module for zstd. The benchmark is conducted using given filenames. The files are read into memory and joined together. It makes benchmark more precise as it eliminates I/O overhead. Multiple filenames can be supplied, as multiple parameters, with wildcards, or names of directories can be used as parameters with `-r` option. The benchmark measures ratio, compressed size, compression and decompression speed. One can select compression levels starting from `-b` and ending with `-e`. The `-i` parameter selects minimal time used for each of tested levels. #### Usage of Command Line Interface The full list of options can be obtained with `-h` or `-H` parameter: ``` Usage : zstd [args] [FILE(s)] [-o file] FILE : a filename with no FILE, or when FILE is - , read standard input Arguments : -# : # compression level (1-19, default:3) -d : decompression -D file: use `file` as Dictionary -o file: result stored into `file` (only if 1 input file) -f : overwrite output without prompting and (de)compress links --rm : remove source file(s) after successful de/compression -k : preserve source file(s) (default) -h/-H : display help/long help and exit Advanced arguments : -V : display Version number and exit -v : verbose mode; specify multiple times to increase verbosity -q : suppress warnings; specify twice to suppress errors too -c : force write to standard output, even if it is the console -l : print information about zstd compressed files --ultra : enable levels beyond 19, up to 22 (requires more memory) --long : enable long distance matching (requires more memory) --no-dictID : don't write dictID into header (dictionary compression) --[no-]check : integrity check (default:enabled) -r : operate recursively on directories --format=gzip : compress files to the .gz format --format=xz : compress files to the .xz format --format=lzma : compress files to the .lzma format --test : test compressed file integrity --[no-]sparse : sparse mode (default:disabled) -M# : Set a memory usage limit for decompression -- : All arguments after "--" are treated as files Dictionary builder : --train ## : create a dictionary from a training set of files --train-cover[=k=#,d=#,steps=#] : use the cover algorithm with optional args --train-legacy[=s=#] : use the legacy algorithm with selectivity (default: 9) -o file : `file` is dictionary name (default: dictionary) --maxdict=# : limit dictionary to specified size (default : 112640) --dictID=# : force dictionary ID to specified value (default: random) Benchmark arguments : -b# : benchmark file(s), using # compression level (default : 1) -e# : test all compression levels from -bX to # (default: 1) -i# : minimum evaluation time in seconds (default : 3s) -B# : cut file into independent blocks of size # (default: no block) --priority=rt : set process priority to real-time ``` #### Long distance matching mode The long distance matching mode, enabled with `--long`, is designed to improve the compression ratio for files with long matches at a large distance (up to the maximum window size, `128 MiB`) while still maintaining compression speed. Enabling this mode sets the window size to `128 MiB` and thus increases the memory usage for both the compressor and decompressor. Performance in terms of speed is dependent on long matches being found. Compression speed may degrade if few long matches are found. Decompression speed usually improves when there are many long distance matches. Below are graphs comparing the compression speed, compression ratio, and decompression speed with and without long distance matching on an ideal use case: a tar of four versions of clang (versions `3.4.1`, `3.4.2`, `3.5.0`, `3.5.1`) with a total size of `244889600 B`. This is an ideal use case as there are many long distance matches within the maximum window size of `128 MiB` (each version is less than `128 MiB`). Compression Speed vs Ratio | Decompression Speed ---------------------------|--------------------- ![Compression Speed vs Ratio](../doc/images/ldmCspeed.png "Compression Speed vs Ratio") | ![Decompression Speed](../doc/images/ldmDspeed.png "Decompression Speed") | Method | Compression ratio | Compression speed | Decompression speed | |:-------|------------------:|-------------------------:|---------------------------:| | `zstd -1` | `5.065` | `284.8 MB/s` | `759.3 MB/s` | | `zstd -5` | `5.826` | `124.9 MB/s` | `674.0 MB/s` | | `zstd -10` | `6.504` | `29.5 MB/s` | `771.3 MB/s` | | `zstd -1 --long` | `17.426` | `220.6 MB/s` | `1638.4 MB/s` | | `zstd -5 --long` | `19.661` | `165.5 MB/s` | `1530.6 MB/s`| | `zstd -10 --long`| `21.949` | `75.6 MB/s` | `1632.6 MB/s`| On this file, the compression ratio improves significantly with minimal impact on compression speed, and the decompression speed doubles. On the other extreme, compressing a file with few long distance matches (such as the [Silesia compression corpus]) will likely lead to a deterioration in compression speed (for lower levels) with minimal change in compression ratio. The below table illustrates this on the [Silesia compression corpus]. [Silesia compression corpus]: http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia | Method | Compression ratio | Compression speed | Decompression speed | |:-------|------------------:|-------------------------:|---------------------------:| | `zstd -1` | `2.878` | `231.7 MB/s` | `594.4 MB/s` | | `zstd -1 --long` | `2.929` | `106.5 MB/s` | `517.9 MB/s` | | `zstd -5` | `3.274` | `77.1 MB/s` | `464.2 MB/s` | | `zstd -5 --long` | `3.319` | `51.7 MB/s` | `371.9 MB/s` | | `zstd -10` | `3.523` | `16.4 MB/s` | `489.2 MB/s` | | `zstd -10 --long`| `3.566` | `16.2 MB/s` | `415.7 MB/s` |