/* ******************************************************************************** ** OS : FreeBSD ** FILE NAME : arcmsr.h ** BY : Erich Chen, Ching Huang ** Description: SCSI RAID Device Driver for ** ARECA (ARC11XX/ARC12XX/ARC13XX/ARC16XX/ARC188x) ** SATA/SAS RAID HOST Adapter ******************************************************************************** ******************************************************************************** ** SPDX-License-Identifier: BSD-3-Clause ** ** Copyright (C) 2002 - 2012, Areca Technology Corporation All rights reserved. ** ** Redistribution and use in source and binary forms,with or without ** modification,are permitted provided that the following conditions ** are met: ** 1. Redistributions of source code must retain the above copyright ** notice,this list of conditions and the following disclaimer. ** 2. Redistributions in binary form must reproduce the above copyright ** notice,this list of conditions and the following disclaimer in the ** documentation and/or other materials provided with the distribution. ** 3. The name of the author may not be used to endorse or promote products ** derived from this software without specific prior written permission. ** ** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR ** IMPLIED WARRANTIES,INCLUDING,BUT NOT LIMITED TO,THE IMPLIED WARRANTIES ** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,INDIRECT, ** INCIDENTAL,SPECIAL,EXEMPLARY,OR CONSEQUENTIAL DAMAGES(INCLUDING,BUT ** NOT LIMITED TO,PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA,OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY,WHETHER IN CONTRACT,STRICT LIABILITY,OR TORT **(INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF ** THIS SOFTWARE,EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ************************************************************************** * $FreeBSD$ */ #define ARCMSR_SCSI_INITIATOR_ID 255 #define ARCMSR_DEV_SECTOR_SIZE 512 #define ARCMSR_MAX_XFER_SECTORS 4096 #define ARCMSR_MAX_TARGETID 17 /*16 max target id + 1*/ #define ARCMSR_MAX_TARGETLUN 8 /*8*/ #define ARCMSR_MAX_CHIPTYPE_NUM 4 #define ARCMSR_MAX_OUTSTANDING_CMD 256 #define ARCMSR_MAX_START_JOB 256 #define ARCMSR_MAX_CMD_PERLUN ARCMSR_MAX_OUTSTANDING_CMD #define ARCMSR_MAX_FREESRB_NUM 384 #define ARCMSR_MAX_QBUFFER 4096 /* ioctl QBUFFER */ #define ARCMSR_MAX_SG_ENTRIES 38 /* max 38*/ #define ARCMSR_MAX_ADAPTER 4 #define ARCMSR_RELEASE_SIMQ_LEVEL 230 #define ARCMSR_MAX_HBB_POSTQUEUE 264 /* (ARCMSR_MAX_OUTSTANDING_CMD+8) */ #define ARCMSR_MAX_HBD_POSTQUEUE 256 #define ARCMSR_TIMEOUT_DELAY 60 /* in sec */ #define ARCMSR_NUM_MSIX_VECTORS 4 /* ********************************************************************* */ #ifndef TRUE #define TRUE 1 #endif #ifndef FALSE #define FALSE 0 #endif #ifndef INTR_ENTROPY # define INTR_ENTROPY 0 #endif #ifndef offsetof #define offsetof(type, member) ((size_t)(&((type *)0)->member)) #endif #if __FreeBSD_version >= 500005 #define ARCMSR_LOCK_INIT(l, s) mtx_init(l, s, NULL, MTX_DEF) #define ARCMSR_LOCK_DESTROY(l) mtx_destroy(l) #define ARCMSR_LOCK_ACQUIRE(l) mtx_lock(l) #define ARCMSR_LOCK_RELEASE(l) mtx_unlock(l) #define ARCMSR_LOCK_TRY(l) mtx_trylock(l) #define arcmsr_htole32(x) htole32(x) typedef struct mtx arcmsr_lock_t; #else #define ARCMSR_LOCK_INIT(l, s) simple_lock_init(l) #define ARCMSR_LOCK_DESTROY(l) #define ARCMSR_LOCK_ACQUIRE(l) simple_lock(l) #define ARCMSR_LOCK_RELEASE(l) simple_unlock(l) #define ARCMSR_LOCK_TRY(l) simple_lock_try(l) #define arcmsr_htole32(x) (x) typedef struct simplelock arcmsr_lock_t; #endif /* ********************************************************************************** ** ********************************************************************************** */ #define PCI_VENDOR_ID_ARECA 0x17D3 /* Vendor ID */ #define PCI_DEVICE_ID_ARECA_1110 0x1110 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1120 0x1120 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1130 0x1130 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1160 0x1160 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1170 0x1170 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1200 0x1200 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1201 0x1201 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1203 0x1203 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1210 0x1210 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1212 0x1212 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1214 0x1214 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1220 0x1220 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1222 0x1222 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1230 0x1230 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1231 0x1231 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1260 0x1260 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1261 0x1261 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1270 0x1270 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1280 0x1280 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1380 0x1380 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1381 0x1381 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1680 0x1680 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1681 0x1681 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1880 0x1880 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1884 0x1884 /* Device ID */ #define ARECA_SUB_DEV_ID_1880 0x1880 /* Subsystem Device ID */ #define ARECA_SUB_DEV_ID_1882 0x1882 /* Subsystem Device ID */ #define ARECA_SUB_DEV_ID_1883 0x1883 /* Subsystem Device ID */ #define ARECA_SUB_DEV_ID_1884 0x1884 /* Subsystem Device ID */ #define ARECA_SUB_DEV_ID_1212 0x1212 /* Subsystem Device ID */ #define ARECA_SUB_DEV_ID_1213 0x1213 /* Subsystem Device ID */ #define ARECA_SUB_DEV_ID_1216 0x1216 /* Subsystem Device ID */ #define ARECA_SUB_DEV_ID_1222 0x1222 /* Subsystem Device ID */ #define ARECA_SUB_DEV_ID_1223 0x1223 /* Subsystem Device ID */ #define ARECA_SUB_DEV_ID_1226 0x1226 /* Subsystem Device ID */ #define PCIDevVenIDARC1110 0x111017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1120 0x112017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1130 0x113017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1160 0x116017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1170 0x117017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1200 0x120017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1201 0x120117D3 /* Vendor Device ID */ #define PCIDevVenIDARC1203 0x120317D3 /* Vendor Device ID */ #define PCIDevVenIDARC1210 0x121017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1212 0x121217D3 /* Vendor Device ID */ #define PCIDevVenIDARC1213 0x121317D3 /* Vendor Device ID */ #define PCIDevVenIDARC1214 0x121417D3 /* Vendor Device ID */ #define PCIDevVenIDARC1220 0x122017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1222 0x122217D3 /* Vendor Device ID */ #define PCIDevVenIDARC1223 0x122317D3 /* Vendor Device ID */ #define PCIDevVenIDARC1230 0x123017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1231 0x123117D3 /* Vendor Device ID */ #define PCIDevVenIDARC1260 0x126017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1261 0x126117D3 /* Vendor Device ID */ #define PCIDevVenIDARC1270 0x127017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1280 0x128017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1380 0x138017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1381 0x138117D3 /* Vendor Device ID */ #define PCIDevVenIDARC1680 0x168017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1681 0x168117D3 /* Vendor Device ID */ #define PCIDevVenIDARC1880 0x188017D3 /* Vendor Device ID */ #define PCIDevVenIDARC1882 0x188217D3 /* Vendor Device ID */ #define PCIDevVenIDARC1884 0x188417D3 /* Vendor Device ID */ #ifndef PCIR_BARS #define PCIR_BARS 0x10 #define PCIR_BAR(x) (PCIR_BARS + (x) * 4) #endif #define PCI_BASE_ADDR0 0x10 #define PCI_BASE_ADDR1 0x14 #define PCI_BASE_ADDR2 0x18 #define PCI_BASE_ADDR3 0x1C #define PCI_BASE_ADDR4 0x20 #define PCI_BASE_ADDR5 0x24 /* ********************************************************************************** ** ********************************************************************************** */ #define ARCMSR_SCSICMD_IOCTL 0x77 #define ARCMSR_CDEVSW_IOCTL 0x88 #define ARCMSR_MESSAGE_FAIL 0x0001 #define ARCMSR_MESSAGE_SUCCESS 0x0000 /* ********************************************************************************** ** ********************************************************************************** */ #define arcmsr_ccbsrb_ptr spriv_ptr0 #define arcmsr_ccbacb_ptr spriv_ptr1 #define dma_addr_hi32(addr) (u_int32_t) ((addr>>16)>>16) #define dma_addr_lo32(addr) (u_int32_t) (addr & 0xffffffff) #define get_min(x,y) ((x) < (y) ? (x) : (y)) #define get_max(x,y) ((x) < (y) ? (y) : (x)) /* ************************************************************************** ************************************************************************** */ #define CHIP_REG_READ32(s, b, r) bus_space_read_4(acb->btag[b], acb->bhandle[b], offsetof(struct s, r)) #define CHIP_REG_WRITE32(s, b, r, d) bus_space_write_4(acb->btag[b], acb->bhandle[b], offsetof(struct s, r), d) #define READ_CHIP_REG32(b, r) bus_space_read_4(acb->btag[b], acb->bhandle[b], r) #define WRITE_CHIP_REG32(b, r, d) bus_space_write_4(acb->btag[b], acb->bhandle[b], r, d) /* ********************************************************************************** ** IOCTL CONTROL Mail Box ********************************************************************************** */ struct CMD_MESSAGE { u_int32_t HeaderLength; u_int8_t Signature[8]; u_int32_t Timeout; u_int32_t ControlCode; u_int32_t ReturnCode; u_int32_t Length; }; struct CMD_MESSAGE_FIELD { struct CMD_MESSAGE cmdmessage; /* ioctl header */ u_int8_t messagedatabuffer[1032]; /* areca gui program does not accept more than 1031 byte */ }; /************************************************************************/ /************************************************************************/ #define ARCMSR_IOP_ERROR_ILLEGALPCI 0x0001 #define ARCMSR_IOP_ERROR_VENDORID 0x0002 #define ARCMSR_IOP_ERROR_DEVICEID 0x0002 #define ARCMSR_IOP_ERROR_ILLEGALCDB 0x0003 #define ARCMSR_IOP_ERROR_UNKNOW_CDBERR 0x0004 #define ARCMSR_SYS_ERROR_MEMORY_ALLOCATE 0x0005 #define ARCMSR_SYS_ERROR_MEMORY_CROSS4G 0x0006 #define ARCMSR_SYS_ERROR_MEMORY_LACK 0x0007 #define ARCMSR_SYS_ERROR_MEMORY_RANGE 0x0008 #define ARCMSR_SYS_ERROR_DEVICE_BASE 0x0009 #define ARCMSR_SYS_ERROR_PORT_VALIDATE 0x000A /*DeviceType*/ #define ARECA_SATA_RAID 0x90000000 /*FunctionCode*/ #define FUNCTION_READ_RQBUFFER 0x0801 #define FUNCTION_WRITE_WQBUFFER 0x0802 #define FUNCTION_CLEAR_RQBUFFER 0x0803 #define FUNCTION_CLEAR_WQBUFFER 0x0804 #define FUNCTION_CLEAR_ALLQBUFFER 0x0805 #define FUNCTION_REQUEST_RETURNCODE_3F 0x0806 #define FUNCTION_SAY_HELLO 0x0807 #define FUNCTION_SAY_GOODBYE 0x0808 #define FUNCTION_FLUSH_ADAPTER_CACHE 0x0809 /* ************************************************************************ ** IOCTL CONTROL CODE ************************************************************************ */ /* ARECA IO CONTROL CODE*/ #define ARCMSR_MESSAGE_READ_RQBUFFER _IOWR('F', FUNCTION_READ_RQBUFFER, struct CMD_MESSAGE_FIELD) #define ARCMSR_MESSAGE_WRITE_WQBUFFER _IOWR('F', FUNCTION_WRITE_WQBUFFER, struct CMD_MESSAGE_FIELD) #define ARCMSR_MESSAGE_CLEAR_RQBUFFER _IOWR('F', FUNCTION_CLEAR_RQBUFFER, struct CMD_MESSAGE_FIELD) #define ARCMSR_MESSAGE_CLEAR_WQBUFFER _IOWR('F', FUNCTION_CLEAR_WQBUFFER, struct CMD_MESSAGE_FIELD) #define ARCMSR_MESSAGE_CLEAR_ALLQBUFFER _IOWR('F', FUNCTION_CLEAR_ALLQBUFFER, struct CMD_MESSAGE_FIELD) #define ARCMSR_MESSAGE_REQUEST_RETURNCODE_3F _IOWR('F', FUNCTION_REQUEST_RETURNCODE_3F, struct CMD_MESSAGE_FIELD) #define ARCMSR_MESSAGE_SAY_HELLO _IOWR('F', FUNCTION_SAY_HELLO, struct CMD_MESSAGE_FIELD) #define ARCMSR_MESSAGE_SAY_GOODBYE _IOWR('F', FUNCTION_SAY_GOODBYE, struct CMD_MESSAGE_FIELD) #define ARCMSR_MESSAGE_FLUSH_ADAPTER_CACHE _IOWR('F', FUNCTION_FLUSH_ADAPTER_CACHE, struct CMD_MESSAGE_FIELD) /* ARECA IOCTL ReturnCode */ #define ARCMSR_MESSAGE_RETURNCODE_OK 0x00000001 #define ARCMSR_MESSAGE_RETURNCODE_ERROR 0x00000006 #define ARCMSR_MESSAGE_RETURNCODE_3F 0x0000003F #define ARCMSR_IOCTL_RETURNCODE_BUS_HANG_ON 0x00000088 /* ************************************************************************ ** SPEC. for Areca HBA adapter ************************************************************************ */ /* signature of set and get firmware config */ #define ARCMSR_SIGNATURE_GET_CONFIG 0x87974060 #define ARCMSR_SIGNATURE_SET_CONFIG 0x87974063 /* message code of inbound message register */ #define ARCMSR_INBOUND_MESG0_NOP 0x00000000 #define ARCMSR_INBOUND_MESG0_GET_CONFIG 0x00000001 #define ARCMSR_INBOUND_MESG0_SET_CONFIG 0x00000002 #define ARCMSR_INBOUND_MESG0_ABORT_CMD 0x00000003 #define ARCMSR_INBOUND_MESG0_STOP_BGRB 0x00000004 #define ARCMSR_INBOUND_MESG0_FLUSH_CACHE 0x00000005 #define ARCMSR_INBOUND_MESG0_START_BGRB 0x00000006 #define ARCMSR_INBOUND_MESG0_CHK331PENDING 0x00000007 #define ARCMSR_INBOUND_MESG0_SYNC_TIMER 0x00000008 /* doorbell interrupt generator */ #define ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK 0x00000001 #define ARCMSR_INBOUND_DRIVER_DATA_READ_OK 0x00000002 #define ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK 0x00000001 #define ARCMSR_OUTBOUND_IOP331_DATA_READ_OK 0x00000002 /* srb areca cdb flag */ #define ARCMSR_SRBPOST_FLAG_SGL_BSIZE 0x80000000 #define ARCMSR_SRBPOST_FLAG_IAM_BIOS 0x40000000 #define ARCMSR_SRBREPLY_FLAG_IAM_BIOS 0x40000000 #define ARCMSR_SRBREPLY_FLAG_ERROR 0x10000000 #define ARCMSR_SRBREPLY_FLAG_ERROR_MODE0 0x10000000 #define ARCMSR_SRBREPLY_FLAG_ERROR_MODE1 0x00000001 /* outbound firmware ok */ #define ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK 0x80000000 #define ARCMSR_ARC1680_BUS_RESET 0x00000003 /* ************************************************************************ ** SPEC. for Areca HBB adapter ************************************************************************ */ /* ARECA HBB COMMAND for its FIRMWARE */ #define ARCMSR_DRV2IOP_DOORBELL 0x00020400 /* window of "instruction flags" from driver to iop */ #define ARCMSR_DRV2IOP_DOORBELL_MASK 0x00020404 #define ARCMSR_IOP2DRV_DOORBELL 0x00020408 /* window of "instruction flags" from iop to driver */ #define ARCMSR_IOP2DRV_DOORBELL_MASK 0x0002040C #define ARCMSR_IOP2DRV_DOORBELL_1203 0x00021870 /* window of "instruction flags" from iop to driver */ #define ARCMSR_IOP2DRV_DOORBELL_MASK_1203 0x00021874 #define ARCMSR_DRV2IOP_DOORBELL_1203 0x00021878 /* window of "instruction flags" from driver to iop */ #define ARCMSR_DRV2IOP_DOORBELL_MASK_1203 0x0002187C /* ARECA FLAG LANGUAGE */ #define ARCMSR_IOP2DRV_DATA_WRITE_OK 0x00000001 /* ioctl transfer */ #define ARCMSR_IOP2DRV_DATA_READ_OK 0x00000002 /* ioctl transfer */ #define ARCMSR_IOP2DRV_CDB_DONE 0x00000004 #define ARCMSR_IOP2DRV_MESSAGE_CMD_DONE 0x00000008 #define ARCMSR_DOORBELL_HANDLE_INT 0x0000000F #define ARCMSR_DOORBELL_INT_CLEAR_PATTERN 0xFF00FFF0 #define ARCMSR_MESSAGE_INT_CLEAR_PATTERN 0xFF00FFF7 #define ARCMSR_MESSAGE_GET_CONFIG 0x00010008 /* (ARCMSR_INBOUND_MESG0_GET_CONFIG<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */ #define ARCMSR_MESSAGE_SET_CONFIG 0x00020008 /* (ARCMSR_INBOUND_MESG0_SET_CONFIG<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */ #define ARCMSR_MESSAGE_ABORT_CMD 0x00030008 /* (ARCMSR_INBOUND_MESG0_ABORT_CMD<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */ #define ARCMSR_MESSAGE_STOP_BGRB 0x00040008 /* (ARCMSR_INBOUND_MESG0_STOP_BGRB<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */ #define ARCMSR_MESSAGE_FLUSH_CACHE 0x00050008 /* (ARCMSR_INBOUND_MESG0_FLUSH_CACHE<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */ #define ARCMSR_MESSAGE_START_BGRB 0x00060008 /* (ARCMSR_INBOUND_MESG0_START_BGRB<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */ #define ARCMSR_MESSAGE_START_DRIVER_MODE 0x000E0008 #define ARCMSR_MESSAGE_SET_POST_WINDOW 0x000F0008 #define ARCMSR_MESSAGE_ACTIVE_EOI_MODE 0x00100008 #define ARCMSR_MESSAGE_FIRMWARE_OK 0x80000000 /* ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK */ #define ARCMSR_DRV2IOP_DATA_WRITE_OK 0x00000001 /* ioctl transfer */ #define ARCMSR_DRV2IOP_DATA_READ_OK 0x00000002 /* ioctl transfer */ #define ARCMSR_DRV2IOP_CDB_POSTED 0x00000004 #define ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED 0x00000008 #define ARCMSR_DRV2IOP_END_OF_INTERRUPT 0x00000010 /* */ /* data tunnel buffer between user space program and its firmware */ #define ARCMSR_MSGCODE_RWBUFFER 0x0000fa00 /* iop msgcode_rwbuffer for message command */ #define ARCMSR_IOCTL_WBUFFER 0x0000fe00 /* user space data to iop 128bytes */ #define ARCMSR_IOCTL_RBUFFER 0x0000ff00 /* iop data to user space 128bytes */ #define ARCMSR_HBB_BASE0_OFFSET 0x00000010 #define ARCMSR_HBB_BASE1_OFFSET 0x00000018 #define ARCMSR_HBB_BASE0_LEN 0x00021000 #define ARCMSR_HBB_BASE1_LEN 0x00010000 /* ************************************************************************ ** SPEC. for Areca HBC adapter ************************************************************************ */ #define ARCMSR_HBC_ISR_THROTTLING_LEVEL 12 #define ARCMSR_HBC_ISR_MAX_DONE_QUEUE 20 /* Host Interrupt Mask */ #define ARCMSR_HBCMU_UTILITY_A_ISR_MASK 0x00000001 /* When clear, the Utility_A interrupt routes to the host.*/ #define ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR_MASK 0x00000004 /* When clear, the General Outbound Doorbell interrupt routes to the host.*/ #define ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR_MASK 0x00000008 /* When clear, the Outbound Post List FIFO Not Empty interrupt routes to the host.*/ #define ARCMSR_HBCMU_ALL_INTMASKENABLE 0x0000000D /* disable all ISR */ /* Host Interrupt Status */ #define ARCMSR_HBCMU_UTILITY_A_ISR 0x00000001 /* ** Set when the Utility_A Interrupt bit is set in the Outbound Doorbell Register. ** It clears by writing a 1 to the Utility_A bit in the Outbound Doorbell Clear Register or through automatic clearing (if enabled). */ #define ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR 0x00000004 /* ** Set if Outbound Doorbell register bits 30:1 have a non-zero ** value. This bit clears only when Outbound Doorbell bits ** 30:1 are ALL clear. Only a write to the Outbound Doorbell ** Clear register clears bits in the Outbound Doorbell register. */ #define ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR 0x00000008 /* ** Set whenever the Outbound Post List Producer/Consumer ** Register (FIFO) is not empty. It clears when the Outbound ** Post List FIFO is empty. */ #define ARCMSR_HBCMU_SAS_ALL_INT 0x00000010 /* ** This bit indicates a SAS interrupt from a source external to ** the PCIe core. This bit is not maskable. */ /* DoorBell*/ #define ARCMSR_HBCMU_DRV2IOP_DATA_WRITE_OK 0x00000002/**/ #define ARCMSR_HBCMU_DRV2IOP_DATA_READ_OK 0x00000004/**/ #define ARCMSR_HBCMU_DRV2IOP_MESSAGE_CMD_DONE 0x00000008/*inbound message 0 ready*/ #define ARCMSR_HBCMU_DRV2IOP_POSTQUEUE_THROTTLING 0x00000010/*more than 12 request completed in a time*/ #define ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_OK 0x00000002/**/ #define ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_DOORBELL_CLEAR 0x00000002/*outbound DATA WRITE isr door bell clear*/ #define ARCMSR_HBCMU_IOP2DRV_DATA_READ_OK 0x00000004/**/ #define ARCMSR_HBCMU_IOP2DRV_DATA_READ_DOORBELL_CLEAR 0x00000004/*outbound DATA READ isr door bell clear*/ #define ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE 0x00000008/*outbound message 0 ready*/ #define ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE_DOORBELL_CLEAR 0x00000008/*outbound message cmd isr door bell clear*/ #define ARCMSR_HBCMU_MESSAGE_FIRMWARE_OK 0x80000000/*ARCMSR_HBCMU_MESSAGE_FIRMWARE_OK*/ #define ARCMSR_HBCMU_RESET_ADAPTER 0x00000024 #define ARCMSR_HBCMU_DiagWrite_ENABLE 0x00000080 /* ************************************************************************ ** SPEC. for Areca HBD adapter ************************************************************************ */ #define ARCMSR_HBDMU_CHIP_ID 0x00004 #define ARCMSR_HBDMU_CPU_MEMORY_CONFIGURATION 0x00008 #define ARCMSR_HBDMU_I2_HOST_INTERRUPT_MASK 0x00034 #define ARCMSR_HBDMU_MAIN_INTERRUPT_STATUS 0x00200 #define ARCMSR_HBDMU_PCIE_F0_INTERRUPT_ENABLE 0x0020C #define ARCMSR_HBDMU_INBOUND_MESSAGE0 0x00400 #define ARCMSR_HBDMU_INBOUND_MESSAGE1 0x00404 #define ARCMSR_HBDMU_OUTBOUND_MESSAGE0 0x00420 #define ARCMSR_HBDMU_OUTBOUND_MESSAGE1 0x00424 #define ARCMSR_HBDMU_INBOUND_DOORBELL 0x00460 #define ARCMSR_HBDMU_OUTBOUND_DOORBELL 0x00480 #define ARCMSR_HBDMU_OUTBOUND_DOORBELL_ENABLE 0x00484 #define ARCMSR_HBDMU_INBOUND_LIST_BASE_LOW 0x01000 #define ARCMSR_HBDMU_INBOUND_LIST_BASE_HIGH 0x01004 #define ARCMSR_HBDMU_INBOUND_LIST_WRITE_POINTER 0x01018 #define ARCMSR_HBDMU_OUTBOUND_LIST_BASE_LOW 0x01060 #define ARCMSR_HBDMU_OUTBOUND_LIST_BASE_HIGH 0x01064 #define ARCMSR_HBDMU_OUTBOUND_LIST_COPY_POINTER 0x0106C #define ARCMSR_HBDMU_OUTBOUND_LIST_READ_POINTER 0x01070 #define ARCMSR_HBDMU_OUTBOUND_INTERRUPT_CAUSE 0x01088 #define ARCMSR_HBDMU_OUTBOUND_INTERRUPT_ENABLE 0x0108C #define ARCMSR_HBDMU_MESSAGE_WBUFFER 0x02000 #define ARCMSR_HBDMU_MESSAGE_RBUFFER 0x02100 #define ARCMSR_HBDMU_MESSAGE_RWBUFFER 0x02200 #define ARCMSR_HBDMU_ISR_THROTTLING_LEVEL 16 #define ARCMSR_HBDMU_ISR_MAX_DONE_QUEUE 20 /* Host Interrupt Mask */ #define ARCMSR_HBDMU_ALL_INT_ENABLE 0x00001010 /* enable all ISR */ #define ARCMSR_HBDMU_ALL_INT_DISABLE 0x00000000 /* disable all ISR */ /* Host Interrupt Status */ #define ARCMSR_HBDMU_OUTBOUND_INT 0x00001010 #define ARCMSR_HBDMU_OUTBOUND_DOORBELL_INT 0x00001000 #define ARCMSR_HBDMU_OUTBOUND_POSTQUEUE_INT 0x00000010 /* DoorBell*/ #define ARCMSR_HBDMU_DRV2IOP_DATA_IN_READY 0x00000001 #define ARCMSR_HBDMU_DRV2IOP_DATA_OUT_READ 0x00000002 #define ARCMSR_HBDMU_IOP2DRV_DATA_WRITE_OK 0x00000001 #define ARCMSR_HBDMU_IOP2DRV_DATA_READ_OK 0x00000002 /*outbound message 0 ready*/ #define ARCMSR_HBDMU_IOP2DRV_MESSAGE_CMD_DONE 0x02000000 #define ARCMSR_HBDMU_F0_DOORBELL_CAUSE 0x02000003 /*outbound message cmd isr door bell clear*/ #define ARCMSR_HBDMU_IOP2DRV_MESSAGE_CMD_DONE_CLEAR 0x02000000 /*outbound list */ #define ARCMSR_HBDMU_OUTBOUND_LIST_INTERRUPT 0x00000001 #define ARCMSR_HBDMU_OUTBOUND_LIST_INTERRUPT_CLEAR 0x00000001 /*ARCMSR_HBAMU_MESSAGE_FIRMWARE_OK*/ #define ARCMSR_HBDMU_MESSAGE_FIRMWARE_OK 0x80000000 /* ******************************************************************************* ** SPEC. for Areca HBE adapter ******************************************************************************* */ #define ARCMSR_SIGNATURE_1884 0x188417D3 #define ARCMSR_HBEMU_OUTBOUND_DOORBELL_ISR 0x00000001 #define ARCMSR_HBEMU_OUTBOUND_POSTQUEUE_ISR 0x00000008 #define ARCMSR_HBEMU_ALL_INTMASKENABLE 0x00000009 /* disable all ISR */ #define ARCMSR_HBEMU_DRV2IOP_DATA_WRITE_OK 0x00000002 #define ARCMSR_HBEMU_DRV2IOP_DATA_READ_OK 0x00000004 #define ARCMSR_HBEMU_DRV2IOP_MESSAGE_CMD_DONE 0x00000008 /* inbound message 0 ready */ #define ARCMSR_HBEMU_IOP2DRV_DATA_WRITE_OK 0x00000002 #define ARCMSR_HBEMU_IOP2DRV_DATA_READ_OK 0x00000004 #define ARCMSR_HBEMU_IOP2DRV_MESSAGE_CMD_DONE 0x00000008 /* outbound message 0 ready */ #define ARCMSR_HBEMU_MESSAGE_FIRMWARE_OK 0x80000000 /* ARCMSR_HBCMU_MESSAGE_FIRMWARE_OK */ /* ARC-1884 doorbell sync */ #define ARCMSR_HBEMU_DOORBELL_SYNC 0x100 #define ARCMSR_ARC188X_RESET_ADAPTER 0x00000004 /* ********************************************************************* ** Message Unit structure ********************************************************************* */ struct HBA_MessageUnit { u_int32_t resrved0[4]; /*0000 000F*/ u_int32_t inbound_msgaddr0; /*0010 0013*/ u_int32_t inbound_msgaddr1; /*0014 0017*/ u_int32_t outbound_msgaddr0; /*0018 001B*/ u_int32_t outbound_msgaddr1; /*001C 001F*/ u_int32_t inbound_doorbell; /*0020 0023*/ u_int32_t inbound_intstatus; /*0024 0027*/ u_int32_t inbound_intmask; /*0028 002B*/ u_int32_t outbound_doorbell; /*002C 002F*/ u_int32_t outbound_intstatus; /*0030 0033*/ u_int32_t outbound_intmask; /*0034 0037*/ u_int32_t reserved1[2]; /*0038 003F*/ u_int32_t inbound_queueport; /*0040 0043*/ u_int32_t outbound_queueport; /*0044 0047*/ u_int32_t reserved2[2]; /*0048 004F*/ u_int32_t reserved3[492]; /*0050 07FF ......local_buffer 492*/ u_int32_t reserved4[128]; /*0800 09FF 128*/ u_int32_t msgcode_rwbuffer[256]; /*0a00 0DFF 256*/ u_int32_t message_wbuffer[32]; /*0E00 0E7F 32*/ u_int32_t reserved5[32]; /*0E80 0EFF 32*/ u_int32_t message_rbuffer[32]; /*0F00 0F7F 32*/ u_int32_t reserved6[32]; /*0F80 0FFF 32*/ }; /* ********************************************************************* ** ********************************************************************* */ struct HBB_DOORBELL_1203 { u_int8_t doorbell_reserved[ARCMSR_IOP2DRV_DOORBELL_1203]; /*reserved */ u_int32_t iop2drv_doorbell; /*offset 0x00021870:00,01,02,03: window of "instruction flags" from iop to driver */ u_int32_t iop2drv_doorbell_mask; /* 04,05,06,07: doorbell mask */ u_int32_t drv2iop_doorbell; /* 08,09,10,11: window of "instruction flags" from driver to iop */ u_int32_t drv2iop_doorbell_mask; /* 12,13,14,15: doorbell mask */ }; struct HBB_DOORBELL { u_int8_t doorbell_reserved[ARCMSR_DRV2IOP_DOORBELL]; /*reserved */ u_int32_t drv2iop_doorbell; /*offset 0x00020400:00,01,02,03: window of "instruction flags" from driver to iop */ u_int32_t drv2iop_doorbell_mask; /* 04,05,06,07: doorbell mask */ u_int32_t iop2drv_doorbell; /* 08,09,10,11: window of "instruction flags" from iop to driver */ u_int32_t iop2drv_doorbell_mask; /* 12,13,14,15: doorbell mask */ }; /* ********************************************************************* ** ********************************************************************* */ struct HBB_RWBUFFER { u_int8_t message_reserved0[ARCMSR_MSGCODE_RWBUFFER]; /*reserved */ u_int32_t msgcode_rwbuffer[256]; /*offset 0x0000fa00: 0, 1, 2, 3,...,1023: message code read write 1024bytes */ u_int32_t message_wbuffer[32]; /*offset 0x0000fe00:1024,1025,1026,1027,...,1151: user space data to iop 128bytes */ u_int32_t message_reserved1[32]; /* 1152,1153,1154,1155,...,1279: message reserved*/ u_int32_t message_rbuffer[32]; /*offset 0x0000ff00:1280,1281,1282,1283,...,1407: iop data to user space 128bytes */ }; /* ********************************************************************* ** ********************************************************************* */ struct HBB_MessageUnit { u_int32_t post_qbuffer[ARCMSR_MAX_HBB_POSTQUEUE]; /* post queue buffer for iop */ u_int32_t done_qbuffer[ARCMSR_MAX_HBB_POSTQUEUE]; /* done queue buffer for iop */ int32_t postq_index; /* post queue index */ int32_t doneq_index; /* done queue index */ struct HBB_DOORBELL *hbb_doorbell; struct HBB_RWBUFFER *hbb_rwbuffer; bus_size_t drv2iop_doorbell; /* window of "instruction flags" from driver to iop */ bus_size_t drv2iop_doorbell_mask; /* doorbell mask */ bus_size_t iop2drv_doorbell; /* window of "instruction flags" from iop to driver */ bus_size_t iop2drv_doorbell_mask; /* doorbell mask */ }; /* ********************************************************************* ** ********************************************************************* */ struct HBC_MessageUnit { u_int32_t message_unit_status; /*0000 0003*/ u_int32_t slave_error_attribute; /*0004 0007*/ u_int32_t slave_error_address; /*0008 000B*/ u_int32_t posted_outbound_doorbell; /*000C 000F*/ u_int32_t master_error_attribute; /*0010 0013*/ u_int32_t master_error_address_low; /*0014 0017*/ u_int32_t master_error_address_high; /*0018 001B*/ u_int32_t hcb_size; /*001C 001F size of the PCIe window used for HCB_Mode accesses*/ u_int32_t inbound_doorbell; /*0020 0023*/ u_int32_t diagnostic_rw_data; /*0024 0027*/ u_int32_t diagnostic_rw_address_low; /*0028 002B*/ u_int32_t diagnostic_rw_address_high; /*002C 002F*/ u_int32_t host_int_status; /*0030 0033 host interrupt status*/ u_int32_t host_int_mask; /*0034 0037 host interrupt mask*/ u_int32_t dcr_data; /*0038 003B*/ u_int32_t dcr_address; /*003C 003F*/ u_int32_t inbound_queueport; /*0040 0043 port32 host inbound queue port*/ u_int32_t outbound_queueport; /*0044 0047 port32 host outbound queue port*/ u_int32_t hcb_pci_address_low; /*0048 004B*/ u_int32_t hcb_pci_address_high; /*004C 004F*/ u_int32_t iop_int_status; /*0050 0053*/ u_int32_t iop_int_mask; /*0054 0057*/ u_int32_t iop_inbound_queue_port; /*0058 005B*/ u_int32_t iop_outbound_queue_port; /*005C 005F*/ u_int32_t inbound_free_list_index; /*0060 0063 inbound free list producer consumer index*/ u_int32_t inbound_post_list_index; /*0064 0067 inbound post list producer consumer index*/ u_int32_t outbound_free_list_index; /*0068 006B outbound free list producer consumer index*/ u_int32_t outbound_post_list_index; /*006C 006F outbound post list producer consumer index*/ u_int32_t inbound_doorbell_clear; /*0070 0073*/ u_int32_t i2o_message_unit_control; /*0074 0077*/ u_int32_t last_used_message_source_address_low; /*0078 007B*/ u_int32_t last_used_message_source_address_high; /*007C 007F*/ u_int32_t pull_mode_data_byte_count[4]; /*0080 008F pull mode data byte count0..count7*/ u_int32_t message_dest_address_index; /*0090 0093*/ u_int32_t done_queue_not_empty_int_counter_timer; /*0094 0097*/ u_int32_t utility_A_int_counter_timer; /*0098 009B*/ u_int32_t outbound_doorbell; /*009C 009F*/ u_int32_t outbound_doorbell_clear; /*00A0 00A3*/ u_int32_t message_source_address_index; /*00A4 00A7 message accelerator source address consumer producer index*/ u_int32_t message_done_queue_index; /*00A8 00AB message accelerator completion queue consumer producer index*/ u_int32_t reserved0; /*00AC 00AF*/ u_int32_t inbound_msgaddr0; /*00B0 00B3 scratchpad0*/ u_int32_t inbound_msgaddr1; /*00B4 00B7 scratchpad1*/ u_int32_t outbound_msgaddr0; /*00B8 00BB scratchpad2*/ u_int32_t outbound_msgaddr1; /*00BC 00BF scratchpad3*/ u_int32_t inbound_queueport_low; /*00C0 00C3 port64 host inbound queue port low*/ u_int32_t inbound_queueport_high; /*00C4 00C7 port64 host inbound queue port high*/ u_int32_t outbound_queueport_low; /*00C8 00CB port64 host outbound queue port low*/ u_int32_t outbound_queueport_high; /*00CC 00CF port64 host outbound queue port high*/ u_int32_t iop_inbound_queue_port_low; /*00D0 00D3*/ u_int32_t iop_inbound_queue_port_high; /*00D4 00D7*/ u_int32_t iop_outbound_queue_port_low; /*00D8 00DB*/ u_int32_t iop_outbound_queue_port_high; /*00DC 00DF*/ u_int32_t message_dest_queue_port_low; /*00E0 00E3 message accelerator destination queue port low*/ u_int32_t message_dest_queue_port_high; /*00E4 00E7 message accelerator destination queue port high*/ u_int32_t last_used_message_dest_address_low; /*00E8 00EB last used message accelerator destination address low*/ u_int32_t last_used_message_dest_address_high; /*00EC 00EF last used message accelerator destination address high*/ u_int32_t message_done_queue_base_address_low; /*00F0 00F3 message accelerator completion queue base address low*/ u_int32_t message_done_queue_base_address_high; /*00F4 00F7 message accelerator completion queue base address high*/ u_int32_t host_diagnostic; /*00F8 00FB*/ u_int32_t write_sequence; /*00FC 00FF*/ u_int32_t reserved1[34]; /*0100 0187*/ u_int32_t reserved2[1950]; /*0188 1FFF*/ u_int32_t message_wbuffer[32]; /*2000 207F*/ u_int32_t reserved3[32]; /*2080 20FF*/ u_int32_t message_rbuffer[32]; /*2100 217F*/ u_int32_t reserved4[32]; /*2180 21FF*/ u_int32_t msgcode_rwbuffer[256]; /*2200 23FF*/ }; /* ********************************************************************* ** ********************************************************************* */ struct InBound_SRB { uint32_t addressLow; //pointer to SRB block uint32_t addressHigh; uint32_t length; // in DWORDs uint32_t reserved0; }; struct OutBound_SRB { uint32_t addressLow; //pointer to SRB block uint32_t addressHigh; }; struct HBD_MessageUnit { uint32_t reserved0; uint32_t chip_id; //0x0004 uint32_t cpu_mem_config; //0x0008 uint32_t reserved1[10]; //0x000C uint32_t i2o_host_interrupt_mask; //0x0034 uint32_t reserved2[114]; //0x0038 uint32_t host_int_status; //0x0200 uint32_t host_int_enable; //0x0204 uint32_t reserved3[1]; //0x0208 uint32_t pcief0_int_enable; //0x020C uint32_t reserved4[124]; //0x0210 uint32_t inbound_msgaddr0; //0x0400 uint32_t inbound_msgaddr1; //0x0404 uint32_t reserved5[6]; //0x0408 uint32_t outbound_msgaddr0; //0x0420 uint32_t outbound_msgaddr1; //0x0424 uint32_t reserved6[14]; //0x0428 uint32_t inbound_doorbell; //0x0460 uint32_t reserved7[7]; //0x0464 uint32_t outbound_doorbell; //0x0480 uint32_t outbound_doorbell_enable; //0x0484 uint32_t reserved8[734]; //0x0488 uint32_t inboundlist_base_low; //0x1000 uint32_t inboundlist_base_high; //0x1004 uint32_t reserved9[4]; //0x1008 uint32_t inboundlist_write_pointer; //0x1018 uint32_t inboundlist_read_pointer; //0x101C uint32_t reserved10[16]; //0x1020 uint32_t outboundlist_base_low; //0x1060 uint32_t outboundlist_base_high; //0x1064 uint32_t reserved11; //0x1068 uint32_t outboundlist_copy_pointer; //0x106C uint32_t outboundlist_read_pointer; //0x1070 0x1072 uint32_t reserved12[5]; //0x1074 uint32_t outboundlist_interrupt_cause; //0x1088 uint32_t outboundlist_interrupt_enable; //0x108C uint32_t reserved13[988]; //0x1090 uint32_t message_wbuffer[32]; //0x2000 uint32_t reserved14[32]; //0x2080 uint32_t message_rbuffer[32]; //0x2100 uint32_t reserved15[32]; //0x2180 uint32_t msgcode_rwbuffer[256]; //0x2200 }; struct HBD_MessageUnit0 { struct InBound_SRB post_qbuffer[ARCMSR_MAX_HBD_POSTQUEUE]; struct OutBound_SRB done_qbuffer[ARCMSR_MAX_HBD_POSTQUEUE+1]; uint16_t postq_index; uint16_t doneq_index; struct HBD_MessageUnit *phbdmu; }; /* ********************************************************************* ** ********************************************************************* */ struct HBE_MessageUnit { u_int32_t iobound_doorbell; /*0000 0003*/ u_int32_t write_sequence_3xxx; /*0004 0007*/ u_int32_t host_diagnostic_3xxx; /*0008 000B*/ u_int32_t posted_outbound_doorbell; /*000C 000F*/ u_int32_t master_error_attribute; /*0010 0013*/ u_int32_t master_error_address_low; /*0014 0017*/ u_int32_t master_error_address_high; /*0018 001B*/ u_int32_t hcb_size; /*001C 001F*/ u_int32_t inbound_doorbell; /*0020 0023*/ u_int32_t diagnostic_rw_data; /*0024 0027*/ u_int32_t diagnostic_rw_address_low; /*0028 002B*/ u_int32_t diagnostic_rw_address_high; /*002C 002F*/ u_int32_t host_int_status; /*0030 0033 host interrupt status*/ u_int32_t host_int_mask; /*0034 0037 host interrupt mask*/ u_int32_t dcr_data; /*0038 003B*/ u_int32_t dcr_address; /*003C 003F*/ u_int32_t inbound_queueport; /*0040 0043 port32 host inbound queue port*/ u_int32_t outbound_queueport; /*0044 0047 port32 host outbound queue port*/ u_int32_t hcb_pci_address_low; /*0048 004B*/ u_int32_t hcb_pci_address_high; /*004C 004F*/ u_int32_t iop_int_status; /*0050 0053*/ u_int32_t iop_int_mask; /*0054 0057*/ u_int32_t iop_inbound_queue_port; /*0058 005B*/ u_int32_t iop_outbound_queue_port; /*005C 005F*/ u_int32_t inbound_free_list_index; /*0060 0063*/ u_int32_t inbound_post_list_index; /*0064 0067*/ u_int32_t outbound_free_list_index; /*0068 006B*/ u_int32_t outbound_post_list_index; /*006C 006F*/ u_int32_t inbound_doorbell_clear; /*0070 0073*/ u_int32_t i2o_message_unit_control; /*0074 0077*/ u_int32_t last_used_message_source_address_low; /*0078 007B*/ u_int32_t last_used_message_source_address_high; /*007C 007F*/ u_int32_t pull_mode_data_byte_count[4]; /*0080 008F*/ u_int32_t message_dest_address_index; /*0090 0093*/ u_int32_t done_queue_not_empty_int_counter_timer; /*0094 0097*/ u_int32_t utility_A_int_counter_timer; /*0098 009B*/ u_int32_t outbound_doorbell; /*009C 009F*/ u_int32_t outbound_doorbell_clear; /*00A0 00A3*/ u_int32_t message_source_address_index; /*00A4 00A7*/ u_int32_t message_done_queue_index; /*00A8 00AB*/ u_int32_t reserved0; /*00AC 00AF*/ u_int32_t inbound_msgaddr0; /*00B0 00B3 scratchpad0*/ u_int32_t inbound_msgaddr1; /*00B4 00B7 scratchpad1*/ u_int32_t outbound_msgaddr0; /*00B8 00BB scratchpad2*/ u_int32_t outbound_msgaddr1; /*00BC 00BF scratchpad3*/ u_int32_t inbound_queueport_low; /*00C0 00C3 port64 host inbound queue port low*/ u_int32_t inbound_queueport_high; /*00C4 00C7 port64 host inbound queue port high*/ u_int32_t outbound_queueport_low; /*00C8 00CB port64 host outbound queue port low*/ u_int32_t outbound_queueport_high; /*00CC 00CF port64 host outbound queue port high*/ u_int32_t iop_inbound_queue_port_low; /*00D0 00D3*/ u_int32_t iop_inbound_queue_port_high; /*00D4 00D7*/ u_int32_t iop_outbound_queue_port_low; /*00D8 00DB*/ u_int32_t iop_outbound_queue_port_high; /*00DC 00DF*/ u_int32_t message_dest_queue_port_low; /*00E0 00E3*/ u_int32_t message_dest_queue_port_high; /*00E4 00E7*/ u_int32_t last_used_message_dest_address_low; /*00E8 00EB*/ u_int32_t last_used_message_dest_address_high; /*00EC 00EF*/ u_int32_t message_done_queue_base_address_low; /*00F0 00F3*/ u_int32_t message_done_queue_base_address_high; /*00F4 00F7*/ u_int32_t host_diagnostic; /*00F8 00FB*/ u_int32_t write_sequence; /*00FC 00FF*/ u_int32_t reserved1[46]; /*0100 01B7*/ u_int32_t reply_post_producer_index; /*01B8 01BB*/ u_int32_t reply_post_consumer_index; /*01BC 01BF*/ u_int32_t reserved2[1936]; /*01C0 1FFF*/ u_int32_t message_wbuffer[32]; /*2000 207F*/ u_int32_t reserved3[32]; /*2080 20FF*/ u_int32_t message_rbuffer[32]; /*2100 217F*/ u_int32_t reserved4[32]; /*2180 21FF*/ u_int32_t msgcode_rwbuffer[256]; /*2200 23FF*/ }; typedef struct deliver_completeQ { u_int16_t cmdFlag; u_int16_t cmdSMID; u_int16_t cmdLMID; // reserved (0) u_int16_t cmdFlag2; // reserved (0) } DeliverQ, CompletionQ, *pDeliver_Q, *pCompletion_Q; #define COMPLETION_Q_POOL_SIZE (sizeof(struct deliver_completeQ) * 512 + 128) /* ********************************************************************* ** ********************************************************************* */ struct MessageUnit_UNION { union { struct HBA_MessageUnit hbamu; struct HBB_MessageUnit hbbmu; struct HBC_MessageUnit hbcmu; struct HBD_MessageUnit0 hbdmu; struct HBE_MessageUnit hbemu; } muu; }; /* ************************************************************* ** structure for holding DMA address data ************************************************************* */ #define IS_SG64_ADDR 0x01000000 /* bit24 */ /* ************************************************************************************************ ** ARECA FIRMWARE SPEC ************************************************************************************************ ** Usage of IOP331 adapter ** (All In/Out is in IOP331's view) ** 1. Message 0 --> InitThread message and retrun code ** 2. Doorbell is used for RS-232 emulation ** inDoorBell : bit0 -- data in ready (DRIVER DATA WRITE OK) ** bit1 -- data out has been read (DRIVER DATA READ OK) ** outDooeBell: bit0 -- data out ready (IOP331 DATA WRITE OK) ** bit1 -- data in has been read (IOP331 DATA READ OK) ** 3. Index Memory Usage ** offset 0xf00 : for RS232 out (request buffer) ** offset 0xe00 : for RS232 in (scratch buffer) ** offset 0xa00 : for inbound message code msgcode_rwbuffer (driver send to IOP331) ** offset 0xa00 : for outbound message code msgcode_rwbuffer (IOP331 send to driver) ** 4. RS-232 emulation ** Currently 128 byte buffer is used ** 1st u_int32_t : Data length (1--124) ** Byte 4--127 : Max 124 bytes of data ** 5. PostQ ** All SCSI Command must be sent through postQ: ** (inbound queue port) Request frame must be 32 bytes aligned ** # bit27--bit31 => flag for post ccb ** # bit0--bit26 => real address (bit27--bit31) of post arcmsr_cdb ** bit31 : 0 : 256 bytes frame ** 1 : 512 bytes frame ** bit30 : 0 : normal request ** 1 : BIOS request ** bit29 : reserved ** bit28 : reserved ** bit27 : reserved ** ------------------------------------------------------------------------------- ** (outbount queue port) Request reply ** # bit27--bit31 => flag for reply ** # bit0--bit26 => real address (bit27--bit31) of reply arcmsr_cdb ** bit31 : must be 0 (for this type of reply) ** bit30 : reserved for BIOS handshake ** bit29 : reserved ** bit28 : 0 : no error, ignore AdapStatus/DevStatus/SenseData ** 1 : Error, error code in AdapStatus/DevStatus/SenseData ** bit27 : reserved ** 6. BIOS request ** All BIOS request is the same with request from PostQ ** Except : ** Request frame is sent from configuration space ** offset: 0x78 : Request Frame (bit30 == 1) ** offset: 0x18 : writeonly to generate IRQ to IOP331 ** Completion of request: ** (bit30 == 0, bit28==err flag) ** 7. Definition of SGL entry (structure) ** 8. Message1 Out - Diag Status Code (????) ** 9. Message0 message code : ** 0x00 : NOP ** 0x01 : Get Config ->offset 0xa00 :for outbound message code msgcode_rwbuffer (IOP331 send to driver) ** Signature 0x87974060(4) ** Request len 0x00000200(4) ** numbers of queue 0x00000100(4) ** SDRAM Size 0x00000100(4)-->256 MB ** IDE Channels 0x00000008(4) ** vendor 40 bytes char ** model 8 bytes char ** FirmVer 16 bytes char ** Device Map 16 bytes char ** ** FirmwareVersion DWORD <== Added for checking of new firmware capability ** 0x02 : Set Config ->offset 0xa00 : for inbound message code msgcode_rwbuffer (driver send to IOP331) ** Signature 0x87974063(4) ** UPPER32 of Request Frame (4)-->Driver Only ** 0x03 : Reset (Abort all queued Command) ** 0x04 : Stop Background Activity ** 0x05 : Flush Cache ** 0x06 : Start Background Activity (re-start if background is halted) ** 0x07 : Check If Host Command Pending (Novell May Need This Function) ** 0x08 : Set controller time ->offset 0xa00 : for inbound message code msgcode_rwbuffer (driver to IOP331) ** byte 0 : 0xaa <-- signature ** byte 1 : 0x55 <-- signature ** byte 2 : year (04) ** byte 3 : month (1..12) ** byte 4 : date (1..31) ** byte 5 : hour (0..23) ** byte 6 : minute (0..59) ** byte 7 : second (0..59) ** ********************************************************************************* ** Porting Of LSI2108/2116 Based PCIE SAS/6G host raid adapter ** ==> Difference from IOP348 ** <1> Message Register 0,1 (the same usage) Init Thread message and retrun code ** Inbound Message 0 (inbound_msgaddr0) : at offset 0xB0 (Scratchpad0) for inbound message code msgcode_rwbuffer (driver send to IOP) ** Inbound Message 1 (inbound_msgaddr1) : at offset 0xB4 (Scratchpad1) Out.... Diag Status Code ** Outbound Message 0 (outbound_msgaddr0): at offset 0xB8 (Scratchpad3) Out.... Diag Status Code ** Outbound Message 1 (outbound_msgaddr1): at offset 0xBC (Scratchpad2) for outbound message code msgcode_rwbuffer (IOP send to driver) ** use doorbell to generate interrupt ** ** inbound doorbell: bit3 -- inbound message 0 ready (driver to iop) ** outbound doorbell: bit3 -- outbound message 0 ready (iop to driver) ** ** a. Message1: Out - Diag Status Code (????) ** ** b. Message0: message code ** 0x00 : NOP ** 0x01 : Get Config ->offset 0xB8 :for outbound message code msgcode_rwbuffer (IOP send to driver) ** Signature 0x87974060(4) ** Request len 0x00000200(4) ** numbers of queue 0x00000100(4) ** SDRAM Size 0x00000100(4)-->256 MB ** IDE Channels 0x00000008(4) ** vendor 40 bytes char ** model 8 bytes char ** FirmVer 16 bytes char ** Device Map 16 bytes char ** cfgVersion ULONG <== Added for checking of new firmware capability ** 0x02 : Set Config ->offset 0xB0 :for inbound message code msgcode_rwbuffer (driver send to IOP) ** Signature 0x87974063(4) ** UPPER32 of Request Frame (4)-->Driver Only ** 0x03 : Reset (Abort all queued Command) ** 0x04 : Stop Background Activity ** 0x05 : Flush Cache ** 0x06 : Start Background Activity (re-start if background is halted) ** 0x07 : Check If Host Command Pending (Novell May Need This Function) ** 0x08 : Set controller time ->offset 0xB0 : for inbound message code msgcode_rwbuffer (driver to IOP) ** byte 0 : 0xaa <-- signature ** byte 1 : 0x55 <-- signature ** byte 2 : year (04) ** byte 3 : month (1..12) ** byte 4 : date (1..31) ** byte 5 : hour (0..23) ** byte 6 : minute (0..59) ** byte 7 : second (0..59) ** ** <2> Doorbell Register is used for RS-232 emulation ** different clear register ** different bit0 definition (bit0 is reserved) ** ** inbound doorbell : at offset 0x20 ** inbound doorbell clear : at offset 0x70 ** ** inbound doorbell : bit0 -- reserved ** bit1 -- data in ready (DRIVER DATA WRITE OK) ** bit2 -- data out has been read (DRIVER DATA READ OK) ** bit3 -- inbound message 0 ready ** bit4 -- more than 12 request completed in a time ** ** outbound doorbell : at offset 0x9C ** outbound doorbell clear : at offset 0xA0 ** ** outbound doorbell : bit0 -- reserved ** bit1 -- data out ready (IOP DATA WRITE OK) ** bit2 -- data in has been read (IOP DATA READ OK) ** bit3 -- outbound message 0 ready ** ** <3> Index Memory Usage (Buffer Area) ** COMPORT_IN at 0x2000: message_wbuffer -- 128 bytes (to be sent to ROC) : for RS232 in (scratch buffer) ** COMPORT_OUT at 0x2100: message_rbuffer -- 128 bytes (to be sent to host): for RS232 out (request buffer) ** BIOS_CFG_AREA at 0x2200: msgcode_rwbuffer -- 1024 bytes for outbound message code msgcode_rwbuffer (IOP send to driver) ** BIOS_CFG_AREA at 0x2200: msgcode_rwbuffer -- 1024 bytes for inbound message code msgcode_rwbuffer (driver send to IOP) ** ** <4> PostQ (Command Post Address) ** All SCSI Command must be sent through postQ: ** inbound queue port32 at offset 0x40 , 0x41, 0x42, 0x43 ** inbound queue port64 at offset 0xC0 (lower)/0xC4 (upper) ** outbound queue port32 at offset 0x44 ** outbound queue port64 at offset 0xC8 (lower)/0xCC (upper) ** For 32bit queue, access low part is enough to send/receive request ** i.e. write 0x40/0xC0, ROC will get the request with high part == 0, the ** same for outbound queue port ** For 64bit queue, if 64bit instruction is supported, use 64bit instruction ** to post inbound request in a single instruction, and use 64bit instruction ** to retrieve outbound request in a single instruction. ** If in 32bit environment, when sending inbound queue, write high part first ** then write low part. For receiving outbound request, read high part first ** then low part, to check queue empty, ONLY check high part to be 0xFFFFFFFF. ** If high part is 0xFFFFFFFF, DO NOT read low part, this may corrupt the ** consistency of the FIFO. Another way to check empty is to check status flag ** at 0x30 bit3. ** Post Address IS NOT shifted (must be 16 bytes aligned) ** For BIOS, 16bytes aligned is OK ** For Driver, 32bytes alignment is recommended. ** POST Command bit0 to bit3 is defined differently ** ---------------------------- ** bit0:1 for PULL mode (must be 1) ** ---------------------------- ** bit3/2/1: for arcmsr cdb size (arccdbsize) ** 000: <= 0x0080 (128) ** 001: <= 0x0100 (256) ** 010: <= 0x0180 (384) ** 011: <= 0x0200 (512) ** 100: <= 0x0280 (640) ** 101: <= 0x0300 (768) ** 110: <= 0x0300 (reserved) ** 111: <= 0x0300 (reserved) ** ----------------------------- ** if len > 0x300 the len always set as 0x300 ** ----------------------------- ** post addr = addr | ((len-1) >> 6) | 1 ** ----------------------------- ** page length in command buffer still required, ** ** if page length > 3, ** firmware will assume more request data need to be retrieved ** ** Outbound Posting ** bit0:0 , no error, 1 with error, refer to status buffer ** bit1:0 , reserved (will be 0) ** bit2:0 , reserved (will be 0) ** bit3:0 , reserved (will be 0) ** bit63-4: Completed command address ** ** BIOS support, no special support is required. ** LSI2108 support I/O register ** All driver functionality is supported through I/O address ** ************************************************************************************************ */ /* ********************************** ** ********************************** */ /* size 8 bytes */ /* 32bit Scatter-Gather list */ struct SG32ENTRY { /* length bit 24 == 0 */ u_int32_t length; /* high 8 bit == flag,low 24 bit == length */ u_int32_t address; }; /* size 12 bytes */ /* 64bit Scatter-Gather list */ struct SG64ENTRY { /* length bit 24 == 1 */ u_int32_t length; /* high 8 bit == flag,low 24 bit == length */ u_int32_t address; u_int32_t addresshigh; }; struct SGENTRY_UNION { union { struct SG32ENTRY sg32entry; /* 30h Scatter gather address */ struct SG64ENTRY sg64entry; /* 30h */ }u; }; /* ********************************** ** ********************************** */ struct QBUFFER { u_int32_t data_len; u_int8_t data[124]; }; /* ********************************** */ typedef struct PHYS_ADDR64 { u_int32_t phyadd_low; u_int32_t phyadd_high; }PHYSADDR64; /* ************************************************************************************************ ** FIRMWARE INFO ************************************************************************************************ */ #define ARCMSR_FW_MODEL_OFFSET 15 #define ARCMSR_FW_VERS_OFFSET 17 #define ARCMSR_FW_DEVMAP_OFFSET 21 #define ARCMSR_FW_CFGVER_OFFSET 25 struct FIRMWARE_INFO { u_int32_t signature; /*0,00-03*/ u_int32_t request_len; /*1,04-07*/ u_int32_t numbers_queue; /*2,08-11*/ u_int32_t sdram_size; /*3,12-15*/ u_int32_t ide_channels; /*4,16-19*/ char vendor[40]; /*5,20-59*/ char model[8]; /*15,60-67*/ char firmware_ver[16]; /*17,68-83*/ char device_map[16]; /*21,84-99*/ u_int32_t cfgVersion; /*25,100-103 Added for checking of new firmware capability*/ char cfgSerial[16]; /*26,104-119*/ u_int32_t cfgPicStatus; /*30,120-123*/ }; /* (A) For cfgVersion in FIRMWARE_INFO ** if low BYTE (byte#0) >= 3 (version 3) ** then byte#1 report the capability of the firmware can xfer in a single request ** ** byte#1 ** 0 256K ** 1 512K ** 2 1M ** 3 2M ** 4 4M ** 5 8M ** 6 16M ** (B) Byte offset 7 (Reserved1) of CDB is changed to msgPages ** Driver support new xfer method need to set this field to indicate ** large CDB block in 0x100 unit (we use 0x100 byte as one page) ** e.g. If the length of CDB including MSG header and SGL is 0x1508 ** driver need to set the msgPages to 0x16 ** (C) REQ_LEN_512BYTE must be used also to indicate SRB length ** e.g. CDB len msgPages REQ_LEN_512BYTE flag ** <= 0x100 1 0 ** <= 0x200 2 1 ** <= 0x300 3 1 ** <= 0x400 4 1 ** . ** . */ /* ************************************************************************************************ ** size 0x1F8 (504) ************************************************************************************************ */ struct ARCMSR_CDB { u_int8_t Bus; /* 00h should be 0 */ u_int8_t TargetID; /* 01h should be 0--15 */ u_int8_t LUN; /* 02h should be 0--7 */ u_int8_t Function; /* 03h should be 1 */ u_int8_t CdbLength; /* 04h not used now */ u_int8_t sgcount; /* 05h */ u_int8_t Flags; /* 06h */ u_int8_t msgPages; /* 07h */ u_int32_t Context; /* 08h Address of this request */ u_int32_t DataLength; /* 0ch not used now */ u_int8_t Cdb[16]; /* 10h SCSI CDB */ /* ******************************************************** ** Device Status : the same from SCSI bus if error occur ** SCSI bus status codes. ******************************************************** */ u_int8_t DeviceStatus; /* 20h if error */ u_int8_t SenseData[15]; /* 21h output */ union { struct SG32ENTRY sg32entry[ARCMSR_MAX_SG_ENTRIES]; /* 30h Scatter gather address */ struct SG64ENTRY sg64entry[ARCMSR_MAX_SG_ENTRIES]; /* 30h */ } u; }; /* CDB flag */ #define ARCMSR_CDB_FLAG_SGL_BSIZE 0x01 /* bit 0: 0(256) / 1(512) bytes */ #define ARCMSR_CDB_FLAG_BIOS 0x02 /* bit 1: 0(from driver) / 1(from BIOS) */ #define ARCMSR_CDB_FLAG_WRITE 0x04 /* bit 2: 0(Data in) / 1(Data out) */ #define ARCMSR_CDB_FLAG_SIMPLEQ 0x00 /* bit 4/3 ,00 : simple Q,01 : head of Q,10 : ordered Q */ #define ARCMSR_CDB_FLAG_HEADQ 0x08 #define ARCMSR_CDB_FLAG_ORDEREDQ 0x10 /* scsi status */ #define SCSISTAT_GOOD 0x00 #define SCSISTAT_CHECK_CONDITION 0x02 #define SCSISTAT_CONDITION_MET 0x04 #define SCSISTAT_BUSY 0x08 #define SCSISTAT_INTERMEDIATE 0x10 #define SCSISTAT_INTERMEDIATE_COND_MET 0x14 #define SCSISTAT_RESERVATION_CONFLICT 0x18 #define SCSISTAT_COMMAND_TERMINATED 0x22 #define SCSISTAT_QUEUE_FULL 0x28 /* DeviceStatus */ #define ARCMSR_DEV_SELECT_TIMEOUT 0xF0 #define ARCMSR_DEV_ABORTED 0xF1 #define ARCMSR_DEV_INIT_FAIL 0xF2 /* ********************************************************************* ** Command Control Block (SrbExtension) ** SRB must be not cross page boundary,and the order from offset 0 ** structure describing an ATA disk request ** this SRB length must be 32 bytes boundary ********************************************************************* */ struct CommandControlBlock { struct ARCMSR_CDB arcmsr_cdb; /* 0 -503 (size of CDB=504): arcmsr messenger scsi command descriptor size 504 bytes */ u_int32_t cdb_phyaddr_low; /* 504-507 */ u_int32_t arc_cdb_size; /* 508-511 */ /* ======================512+32 bytes============================ */ union ccb *pccb; /* 512-515 516-519 pointer of freebsd scsi command */ struct AdapterControlBlock *acb; /* 520-523 524-527 */ bus_dmamap_t dm_segs_dmamap; /* 528-531 532-535 */ u_int16_t srb_flags; /* 536-537 */ u_int16_t srb_state; /* 538-539 */ u_int32_t cdb_phyaddr_high; /* 540-543 */ struct callout ccb_callout; u_int32_t smid; /* ========================================================== */ }; /* srb_flags */ #define SRB_FLAG_READ 0x0000 #define SRB_FLAG_WRITE 0x0001 #define SRB_FLAG_ERROR 0x0002 #define SRB_FLAG_FLUSHCACHE 0x0004 #define SRB_FLAG_MASTER_ABORTED 0x0008 #define SRB_FLAG_DMAVALID 0x0010 #define SRB_FLAG_DMACONSISTENT 0x0020 #define SRB_FLAG_DMAWRITE 0x0040 #define SRB_FLAG_PKTBIND 0x0080 #define SRB_FLAG_TIMER_START 0x0080 /* srb_state */ #define ARCMSR_SRB_DONE 0x0000 #define ARCMSR_SRB_UNBUILD 0x0000 #define ARCMSR_SRB_TIMEOUT 0x1111 #define ARCMSR_SRB_RETRY 0x2222 #define ARCMSR_SRB_START 0x55AA #define ARCMSR_SRB_PENDING 0xAA55 #define ARCMSR_SRB_RESET 0xA5A5 #define ARCMSR_SRB_ABORTED 0x5A5A #define ARCMSR_SRB_ILLEGAL 0xFFFF #define SRB_SIZE ((sizeof(struct CommandControlBlock)+0x1f) & 0xffe0) #define ARCMSR_SRBS_POOL_SIZE (SRB_SIZE * ARCMSR_MAX_FREESRB_NUM) /* ********************************************************************* ** Adapter Control Block ********************************************************************* */ #define ACB_ADAPTER_TYPE_A 0x00000000 /* hba I IOP */ #define ACB_ADAPTER_TYPE_B 0x00000001 /* hbb M IOP */ #define ACB_ADAPTER_TYPE_C 0x00000002 /* hbc L IOP */ #define ACB_ADAPTER_TYPE_D 0x00000003 /* hbd M IOP */ #define ACB_ADAPTER_TYPE_E 0x00000004 /* hbd L IOP */ struct AdapterControlBlock { u_int32_t adapter_type; /* adapter A,B..... */ bus_space_tag_t btag[2]; bus_space_handle_t bhandle[2]; bus_dma_tag_t parent_dmat; bus_dma_tag_t dm_segs_dmat; /* dmat for buffer I/O */ bus_dma_tag_t srb_dmat; /* dmat for freesrb */ bus_dmamap_t srb_dmamap; device_t pci_dev; #if __FreeBSD_version < 503000 dev_t ioctl_dev; #else struct cdev *ioctl_dev; #endif int pci_unit; struct resource *sys_res_arcmsr[2]; struct resource *irqres[ARCMSR_NUM_MSIX_VECTORS]; void *ih[ARCMSR_NUM_MSIX_VECTORS]; /* interrupt handle */ int irq_id[ARCMSR_NUM_MSIX_VECTORS]; /* Hooks into the CAM XPT */ struct cam_sim *psim; struct cam_path *ppath; u_int8_t *uncacheptr; unsigned long vir2phy_offset; union { unsigned long phyaddr; struct { u_int32_t phyadd_low; u_int32_t phyadd_high; }B; }srb_phyaddr; // unsigned long srb_phyaddr; /* Offset is used in making arc cdb physical to virtual calculations */ u_int32_t outbound_int_enable; struct MessageUnit_UNION *pmu; /* message unit ATU inbound base address0 */ u_int8_t adapter_index; u_int8_t irq; u_int16_t acb_flags; struct CommandControlBlock *psrb_pool[ARCMSR_MAX_FREESRB_NUM]; /* serial srb pointer array */ struct CommandControlBlock *srbworkingQ[ARCMSR_MAX_FREESRB_NUM]; /* working srb pointer array */ int32_t workingsrb_doneindex; /* done srb array index */ int32_t workingsrb_startindex; /* start srb array index */ int32_t srboutstandingcount; u_int8_t rqbuffer[ARCMSR_MAX_QBUFFER]; /* data collection buffer for read from 80331 */ u_int32_t rqbuf_firstindex; /* first of read buffer */ u_int32_t rqbuf_lastindex; /* last of read buffer */ u_int8_t wqbuffer[ARCMSR_MAX_QBUFFER]; /* data collection buffer for write to 80331 */ u_int32_t wqbuf_firstindex; /* first of write buffer */ u_int32_t wqbuf_lastindex; /* last of write buffer */ arcmsr_lock_t isr_lock; arcmsr_lock_t srb_lock; arcmsr_lock_t postDone_lock; arcmsr_lock_t qbuffer_lock; u_int8_t devstate[ARCMSR_MAX_TARGETID][ARCMSR_MAX_TARGETLUN]; /* id0 ..... id15,lun0...lun7 */ u_int32_t num_resets; u_int32_t num_aborts; u_int32_t firm_request_len; /*1,04-07*/ u_int32_t firm_numbers_queue; /*2,08-11*/ u_int32_t firm_sdram_size; /*3,12-15*/ u_int32_t firm_ide_channels; /*4,16-19*/ u_int32_t firm_cfg_version; char firm_model[12]; /*15,60-67*/ char firm_version[20]; /*17,68-83*/ char device_map[20]; /*21,84-99 */ struct callout devmap_callout; u_int32_t pktRequestCount; u_int32_t pktReturnCount; u_int32_t vendor_device_id; u_int32_t adapter_bus_speed; u_int32_t maxOutstanding; u_int16_t sub_device_id; u_int32_t doneq_index; u_int32_t in_doorbell; u_int32_t out_doorbell; u_int32_t completionQ_entry; pCompletion_Q pCompletionQ; int msix_vectors; int rid[2]; };/* HW_DEVICE_EXTENSION */ /* acb_flags */ #define ACB_F_SCSISTOPADAPTER 0x0001 #define ACB_F_MSG_STOP_BGRB 0x0002 /* stop RAID background rebuild */ #define ACB_F_MSG_START_BGRB 0x0004 /* stop RAID background rebuild */ #define ACB_F_IOPDATA_OVERFLOW 0x0008 /* iop ioctl data rqbuffer overflow */ #define ACB_F_MESSAGE_WQBUFFER_CLEARED 0x0010 /* ioctl clear wqbuffer */ #define ACB_F_MESSAGE_RQBUFFER_CLEARED 0x0020 /* ioctl clear rqbuffer */ #define ACB_F_MESSAGE_WQBUFFER_READ 0x0040 #define ACB_F_BUS_RESET 0x0080 #define ACB_F_IOP_INITED 0x0100 /* iop init */ #define ACB_F_MAPFREESRB_FAILD 0x0200 /* arcmsr_map_freesrb faild */ #define ACB_F_CAM_DEV_QFRZN 0x0400 #define ACB_F_BUS_HANG_ON 0x0800 /* need hardware reset bus */ #define ACB_F_SRB_FUNCTION_POWER 0x1000 #define ACB_F_MSIX_ENABLED 0x2000 /* devstate */ #define ARECA_RAID_GONE 0x55 #define ARECA_RAID_GOOD 0xaa /* adapter_bus_speed */ #define ACB_BUS_SPEED_3G 0 #define ACB_BUS_SPEED_6G 1 #define ACB_BUS_SPEED_12G 2 /* ************************************************************* ************************************************************* */ struct SENSE_DATA { u_int8_t ErrorCode:7; u_int8_t Valid:1; u_int8_t SegmentNumber; u_int8_t SenseKey:4; u_int8_t Reserved:1; u_int8_t IncorrectLength:1; u_int8_t EndOfMedia:1; u_int8_t FileMark:1; u_int8_t Information[4]; u_int8_t AdditionalSenseLength; u_int8_t CommandSpecificInformation[4]; u_int8_t AdditionalSenseCode; u_int8_t AdditionalSenseCodeQualifier; u_int8_t FieldReplaceableUnitCode; u_int8_t SenseKeySpecific[3]; }; /* ********************************** ** Peripheral Device Type definitions ********************************** */ #define SCSI_DASD 0x00 /* Direct-access Device */ #define SCSI_SEQACESS 0x01 /* Sequential-access device */ #define SCSI_PRINTER 0x02 /* Printer device */ #define SCSI_PROCESSOR 0x03 /* Processor device */ #define SCSI_WRITEONCE 0x04 /* Write-once device */ #define SCSI_CDROM 0x05 /* CD-ROM device */ #define SCSI_SCANNER 0x06 /* Scanner device */ #define SCSI_OPTICAL 0x07 /* Optical memory device */ #define SCSI_MEDCHGR 0x08 /* Medium changer device */ #define SCSI_COMM 0x09 /* Communications device */ #define SCSI_NODEV 0x1F /* Unknown or no device type */ /* ************************************************************************************************************ ** @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ** 80331 PCI-to-PCI Bridge ** PCI Configuration Space ** ** @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ** Programming Interface ** ======================== ** Configuration Register Address Space Groupings and Ranges ** ============================================================= ** Register Group Configuration Offset ** ------------------------------------------------------------- ** Standard PCI Configuration 00-3Fh ** ------------------------------------------------------------- ** Device Specific Registers 40-A7h ** ------------------------------------------------------------- ** Reserved A8-CBh ** ------------------------------------------------------------- ** Enhanced Capability List CC-FFh ** ========================================================================================================== ** Standard PCI [Type 1] Configuration Space Address Map ** ********************************************************************************************************** ** | Byte 3 | Byte 2 | Byte 1 | Byte 0 | Configu-ration Byte Offset ** ---------------------------------------------------------------------------------------------------------- ** | Device ID | Vendor ID | 00h ** ---------------------------------------------------------------------------------------------------------- ** | Primary Status | Primary Command | 04h ** ---------------------------------------------------------------------------------------------------------- ** | Class Code | RevID | 08h ** ---------------------------------------------------------------------------------------------------------- ** | reserved | Header Type | Primary MLT | Primary CLS | 0Ch ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | 10h ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | 14h ** ---------------------------------------------------------------------------------------------------------- ** | Secondary MLT | Subordinate Bus Number | Secondary Bus Number | Primary Bus Number | 18h ** ---------------------------------------------------------------------------------------------------------- ** | Secondary Status | I/O Limit | I/O Base | 1Ch ** ---------------------------------------------------------------------------------------------------------- ** | Non-prefetchable Memory Limit Address | Non-prefetchable Memory Base Address | 20h ** ---------------------------------------------------------------------------------------------------------- ** | Prefetchable Memory Limit Address | Prefetchable Memory Base Address | 24h ** ---------------------------------------------------------------------------------------------------------- ** | Prefetchable Memory Base Address Upper 32 Bits | 28h ** ---------------------------------------------------------------------------------------------------------- ** | Prefetchable Memory Limit Address Upper 32 Bits | 2Ch ** ---------------------------------------------------------------------------------------------------------- ** | I/O Limit Upper 16 Bits | I/O Base Upper 16 | 30h ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | Capabilities Pointer | 34h ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | 38h ** ---------------------------------------------------------------------------------------------------------- ** | Bridge Control | Primary Interrupt Pin | Primary Interrupt Line | 3Ch **============================================================================================================= */ /* **============================================================================================================= ** 0x03-0x00 : ** Bit Default Description **31:16 0335h Device ID (DID): Indicates the unique device ID that is assigned to bridge by the PCI SIG. ** ID is unique per product speed as indicated. **15:00 8086h Vendor ID (VID): 16-bit field which indicates that Intel is the vendor. **============================================================================================================= */ #define ARCMSR_PCI2PCI_VENDORID_REG 0x00 /*word*/ #define ARCMSR_PCI2PCI_DEVICEID_REG 0x02 /*word*/ /* **============================================================================== ** 0x05-0x04 : command register ** Bit Default Description **15:11 00h Reserved ** 10 0 Interrupt Disable: Disables/Enables the generation of Interrupts on the primary bus. ** The bridge does not support interrupts. ** 09 0 FB2B Enable: Enables/Disables the generation of fast back to back ** transactions on the primary bus. ** The bridge does not generate fast back to back ** transactions on the primary bus. ** 08 0 SERR# Enable (SEE): Enables primary bus SERR# assertions. ** 0=The bridge does not assert P_SERR#. ** 1=The bridge may assert P_SERR#, subject to other programmable criteria. ** 07 0 Wait Cycle Control (WCC): Always returns 0bzero indicating ** that bridge does not perform address or data stepping, ** 06 0 Parity Error Response (PER): Controls bridge response to a detected primary bus parity error. ** 0=When a data parity error is detected bridge does not assert S_PERR#. ** Also bridge does not assert P_SERR# in response to ** a detected address or attribute parity error. ** 1=When a data parity error is detected bridge asserts S_PERR#. ** The bridge also asserts P_SERR# ** (when enabled globally via bit(8) of this register) ** in response to a detected address or attribute parity error. ** 05 0 VGA Palette Snoop Enable (VGA_PSE): Controls bridge response to VGA-compatible palette write transactions. ** VGA palette write transactions are I/O transactions ** whose address bits are: P_AD[9:0] equal to 3C6h, 3C8h or 3C9h ** P_AD[15:10] are not decoded (i.e. aliases are claimed), ** or are fully decoding ** (i.e., must be all 0's depending upon the VGA ** aliasing bit in the Bridge Control Register, offset 3Eh. ** P_AD[31:16] equal to 0000h ** 0=The bridge ignores VGA palette write transactions, ** unless decoded by the standard I/O address range window. ** 1=The bridge responds to VGA palette write transactions ** with medium DEVSEL# timing and forwards them to the secondary bus. ** 04 0 Memory Write and Invalidate Enable (MWIE): The bridge does not promote MW transactions to MWI transactions. ** MWI transactions targeting resources on the opposite side of the bridge, ** however, are forwarded as MWI transactions. ** 03 0 Special Cycle Enable (SCE): The bridge ignores special cycle transactions. ** This bit is read only and always returns 0 when read ** 02 0 Bus Master Enable (BME): Enables bridge to initiate memory and I/O transactions on the primary interface. ** Initiation of configuration transactions is not affected by the state of this bit. ** 0=The bridge does not initiate memory or I/O transactions on the primary interface. ** 1=The bridge is enabled to function as an initiator on the primary interface. ** 01 0 Memory Space Enable (MSE): Controls target response to memory transactions on the primary interface. ** 0=The bridge target response to memory transactions on the primary interface is disabled. ** 1=The bridge target response to memory transactions on the primary interface is enabled. ** 00 0 I/O Space Enable (IOSE): Controls target response to I/O transactions on the primary interface. ** 0=The bridge target response to I/O transactions on the primary interface is disabled. ** 1=The bridge target response to I/O transactions on the primary interface is enabled. **============================================================================== */ #define ARCMSR_PCI2PCI_PRIMARY_COMMAND_REG 0x04 /*word*/ #define PCI_DISABLE_INTERRUPT 0x0400 /* **============================================================================== ** 0x07-0x06 : status register ** Bit Default Description ** 15 0 Detected Parity Error: The bridge sets this bit to a 1b whenever it detects an address, ** attribute or data parity error. ** This bit is set regardless of the state of the PER bit in the command register. ** 14 0 Signaled System Error: The bridge sets this bit to a 1b whenever it asserts SERR# on the primary bus. ** 13 0 Received Master Abort: The bridge sets this bit to a 1b when, ** acting as the initiator on the primary bus, ** its transaction (with the exception of special cycles) ** has been terminated with a Master Abort. ** 12 0 Received Target Abort: The bridge sets this bit to a 1b when, ** acting as the initiator on the primary bus, ** its transaction has been terminated with a Target Abort. ** 11 0 Signaled Target Abort: The bridge sets this bit to a 1b when it, ** as the target of a transaction, terminates it with a Target Abort. ** In PCI-X mode this bit is also set when it forwards a SCM with a target abort error code. ** 10:09 01 DEVSEL# Timing: Indicates slowest response to a non-configuration command on the primary interface. ** Returns Ħ§01bĦ¨ when read, indicating that bridge responds no slower than with medium timing. ** 08 0 Master Data Parity Error: The bridge sets this bit to a 1b when all of the following conditions are true: ** The bridge is the current master on the primary bus ** S_PERR# is detected asserted or is asserted by bridge ** The Parity Error Response bit is set in the Command register ** 07 1 Fast Back to Back Capable: Returns a 1b when read indicating that bridge ** is able to respond to fast back to back transactions on its primary interface. ** 06 0 Reserved ** 05 1 66 MHz Capable Indication: Returns a 1b when read indicating that bridge primary interface is 66 MHz capable. ** 1 = ** 04 1 Capabilities List Enable: Returns 1b when read indicating that bridge supports PCI standard enhanced capabilities. ** Offset 34h (Capability Pointer register) ** provides the offset for the first entry ** in the linked list of enhanced capabilities. ** 03 0 Interrupt Status: Reflects the state of the interrupt in the device/function. ** The bridge does not support interrupts. ** 02:00 000 Reserved **============================================================================== */ #define ARCMSR_PCI2PCI_PRIMARY_STATUS_REG 0x06 /*word: 06,07 */ #define ARCMSR_ADAP_66MHZ 0x20 /* **============================================================================== ** 0x08 : revision ID ** Bit Default Description ** 07:00 00000000 Revision ID (RID): '00h' indicating bridge A-0 stepping. **============================================================================== */ #define ARCMSR_PCI2PCI_REVISIONID_REG 0x08 /*byte*/ /* **============================================================================== ** 0x0b-0x09 : 0180_00 (class code 1,native pci mode ) ** Bit Default Description ** 23:16 06h Base Class Code (BCC): Indicates that this is a bridge device. ** 15:08 04h Sub Class Code (SCC): Indicates this is of type PCI-to-PCI bridge. ** 07:00 00h Programming Interface (PIF): Indicates that this is standard (non-subtractive) PCI-PCI bridge. **============================================================================== */ #define ARCMSR_PCI2PCI_CLASSCODE_REG 0x09 /*3bytes*/ /* **============================================================================== ** 0x0c : cache line size ** Bit Default Description ** 07:00 00h Cache Line Size (CLS): Designates the cache line size in 32-bit dword units. ** The contents of this register are factored into ** internal policy decisions associated with memory read prefetching, ** and the promotion of Memory Write transactions to MWI transactions. ** Valid cache line sizes are 8 and 16 dwords. ** When the cache line size is set to an invalid value, ** bridge behaves as though the cache line size was set to 00h. **============================================================================== */ #define ARCMSR_PCI2PCI_PRIMARY_CACHELINESIZE_REG 0x0C /*byte*/ /* **============================================================================== ** 0x0d : latency timer (number of pci clock 00-ff ) ** Bit Default Description ** Primary Latency Timer (PTV): ** 07:00 00h (Conventional PCI) Conventional PCI Mode: Primary bus Master latency timer. Indicates the number of PCI clock cycles, ** referenced from the assertion of FRAME# to the expiration of the timer, ** when bridge may continue as master of the current transaction. All bits are writable, ** resulting in a granularity of 1 PCI clock cycle. ** When the timer expires (i.e., equals 00h) ** bridge relinquishes the bus after the first data transfer ** when its PCI bus grant has been deasserted. ** or 40h (PCI-X) PCI-X Mode: Primary bus Master latency timer. ** Indicates the number of PCI clock cycles, ** referenced from the assertion of FRAME# to the expiration of the timer, ** when bridge may continue as master of the current transaction. ** All bits are writable, resulting in a granularity of 1 PCI clock cycle. ** When the timer expires (i.e., equals 00h) bridge relinquishes the bus at the next ADB. ** (Except in the case where MLT expires within 3 data phases ** of an ADB.In this case bridge continues on ** until it reaches the next ADB before relinquishing the bus.) **============================================================================== */ #define ARCMSR_PCI2PCI_PRIMARY_LATENCYTIMER_REG 0x0D /*byte*/ /* **============================================================================== ** 0x0e : (header type,single function ) ** Bit Default Description ** 07 0 Multi-function device (MVD): 80331 is a single-function device. ** 06:00 01h Header Type (HTYPE): Defines the layout of addresses 10h through 3Fh in configuration space. ** Returns Ħ§01hĦ¨ when read indicating ** that the register layout conforms to the standard PCI-to-PCI bridge layout. **============================================================================== */ #define ARCMSR_PCI2PCI_HEADERTYPE_REG 0x0E /*byte*/ /* **============================================================================== ** 0x0f : **============================================================================== */ /* **============================================================================== ** 0x13-0x10 : ** PCI CFG Base Address #0 (0x10) **============================================================================== */ /* **============================================================================== ** 0x17-0x14 : ** PCI CFG Base Address #1 (0x14) **============================================================================== */ /* **============================================================================== ** 0x1b-0x18 : ** PCI CFG Base Address #2 (0x18) **-----------------0x1A,0x19,0x18--Bus Number Register - BNR ** Bit Default Description ** 23:16 00h Subordinate Bus Number (SBBN): Indicates the highest PCI bus number below this bridge. ** Any Type 1 configuration cycle ** on the primary bus whose bus number is greater than the secondary bus number, ** and less than or equal to the subordinate bus number ** is forwarded unaltered as a Type 1 configuration cycle on the secondary PCI bus. ** 15:08 00h Secondary Bus Number (SCBN): Indicates the bus number of PCI to which the secondary interface is connected. ** Any Type 1 configuration cycle matching this bus number ** is translated to a Type 0 configuration cycle (or a Special Cycle) ** before being executed on bridge's secondary PCI bus. ** 07:00 00h Primary Bus Number (PBN): Indicates bridge primary bus number. ** Any Type 1 configuration cycle on the primary interface ** with a bus number that is less than the contents ** of this register field does not be claimed by bridge. **-----------------0x1B--Secondary Latency Timer Register - SLTR ** Bit Default Description ** Secondary Latency Timer (STV): ** 07:00 00h (Conventional PCI) Conventional PCI Mode: Secondary bus Master latency timer. ** Indicates the number of PCI clock cycles, ** referenced from the assertion of FRAME# to the expiration of the timer, ** when bridge may continue as master of the current transaction. All bits are writable, ** resulting in a granularity of 1 PCI clock cycle. ** When the timer expires (i.e., equals 00h) ** bridge relinquishes the bus after the first data transfer ** when its PCI bus grant has been deasserted. ** or 40h (PCI-X) PCI-X Mode: Secondary bus Master latency timer. ** Indicates the number of PCI clock cycles,referenced from the assertion of FRAME# ** to the expiration of the timer, ** when bridge may continue as master of the current transaction. All bits are writable, ** resulting in a granularity of 1 PCI clock cycle. ** When the timer expires (i.e., equals 00h) bridge relinquishes the bus at the next ADB. ** (Except in the case where MLT expires within 3 data phases of an ADB. ** In this case bridge continues on until it reaches the next ADB ** before relinquishing the bus) **============================================================================== */ #define ARCMSR_PCI2PCI_PRIMARY_BUSNUMBER_REG 0x18 /*3byte 0x1A,0x19,0x18*/ #define ARCMSR_PCI2PCI_SECONDARY_BUSNUMBER_REG 0x19 /*byte*/ #define ARCMSR_PCI2PCI_SUBORDINATE_BUSNUMBER_REG 0x1A /*byte*/ #define ARCMSR_PCI2PCI_SECONDARY_LATENCYTIMER_REG 0x1B /*byte*/ /* **============================================================================== ** 0x1f-0x1c : ** PCI CFG Base Address #3 (0x1C) **-----------------0x1D,0x1C--I/O Base and Limit Register - IOBL ** Bit Default Description ** 15:12 0h I/O Limit Address Bits [15:12]: Defines the top address of an address range to ** determine when to forward I/O transactions from one interface to the other. ** These bits correspond to address lines 15:12 for 4KB alignment. ** Bits 11:0 are assumed to be FFFh. ** 11:08 1h I/O Limit Addressing Capability: This field is hard-wired to 1h, indicating support 32-bit I/O addressing. ** 07:04 0h I/O Base Address Bits [15:12]: Defines the bottom address of ** an address range to determine when to forward I/O transactions ** from one interface to the other. ** These bits correspond to address lines 15:12 for 4KB alignment. ** Bits 11:0 are assumed to be 000h. ** 03:00 1h I/O Base Addressing Capability: This is hard-wired to 1h, indicating support for 32-bit I/O addressing. **-----------------0x1F,0x1E--Secondary Status Register - SSR ** Bit Default Description ** 15 0b Detected Parity Error: The bridge sets this bit to a 1b whenever it detects an address, ** attribute or data parity error on its secondary interface. ** 14 0b Received System Error: The bridge sets this bit when it samples SERR# asserted on its secondary bus interface. ** 13 0b Received Master Abort: The bridge sets this bit to a 1b when, ** acting as the initiator on the secondary bus, ** it's transaction (with the exception of special cycles) ** has been terminated with a Master Abort. ** 12 0b Received Target Abort: The bridge sets this bit to a 1b when, ** acting as the initiator on the secondary bus, ** it's transaction has been terminated with a Target Abort. ** 11 0b Signaled Target Abort: The bridge sets this bit to a 1b when it, ** as the target of a transaction, terminates it with a Target Abort. ** In PCI-X mode this bit is also set when it forwards a SCM with a target abort error code. ** 10:09 01b DEVSEL# Timing: Indicates slowest response to a non-configuration command on the secondary interface. ** Returns Ħ§01bĦ¨ when read, indicating that bridge responds no slower than with medium timing. ** 08 0b Master Data Parity Error: The bridge sets this bit to a 1b when all of the following conditions are true: ** The bridge is the current master on the secondary bus ** S_PERR# is detected asserted or is asserted by bridge ** The Parity Error Response bit is set in the Command register ** 07 1b Fast Back-to-Back Capable (FBC): Indicates that the secondary interface of bridge can receive fast back-to-back cycles. ** 06 0b Reserved ** 05 1b 66 MHz Capable (C66): Indicates the secondary interface of the bridge is 66 MHz capable. ** 1 = ** 04:00 00h Reserved **============================================================================== */ #define ARCMSR_PCI2PCI_IO_BASE_REG 0x1C /*byte*/ #define ARCMSR_PCI2PCI_IO_LIMIT_REG 0x1D /*byte*/ #define ARCMSR_PCI2PCI_SECONDARY_STATUS_REG 0x1E /*word: 0x1F,0x1E */ /* **============================================================================== ** 0x23-0x20 : ** PCI CFG Base Address #4 (0x20) **-----------------0x23,0x22,0x21,0x20--Memory Base and Limit Register - MBL ** Bit Default Description ** 31:20 000h Memory Limit: These 12 bits are compared with P_AD[31:20] of the incoming address to determine ** the upper 1MB aligned value (exclusive) of the range. ** The incoming address must be less than or equal to this value. ** For the purposes of address decoding the lower 20 address bits (P_AD[19:0] ** are assumed to be F FFFFh. ** 19:16 0h Reserved. ** 15:04 000h Memory Base: These 12 bits are compared with bits P_AD[31:20] ** of the incoming address to determine the lower 1MB ** aligned value (inclusive) of the range. ** The incoming address must be greater than or equal to this value. ** For the purposes of address decoding the lower 20 address bits (P_AD[19:0]) ** are assumed to be 0 0000h. ** 03:00 0h Reserved. **============================================================================== */ #define ARCMSR_PCI2PCI_NONPREFETCHABLE_MEMORY_BASE_REG 0x20 /*word: 0x21,0x20 */ #define ARCMSR_PCI2PCI_NONPREFETCHABLE_MEMORY_LIMIT_REG 0x22 /*word: 0x23,0x22 */ /* **============================================================================== ** 0x27-0x24 : ** PCI CFG Base Address #5 (0x24) **-----------------0x27,0x26,0x25,0x24--Prefetchable Memory Base and Limit Register - PMBL ** Bit Default Description ** 31:20 000h Prefetchable Memory Limit: These 12 bits are compared with P_AD[31:20] of the incoming address to determine ** the upper 1MB aligned value (exclusive) of the range. ** The incoming address must be less than or equal to this value. ** For the purposes of address decoding the lower 20 address bits (P_AD[19:0] ** are assumed to be F FFFFh. ** 19:16 1h 64-bit Indicator: Indicates that 64-bit addressing is supported. ** 15:04 000h Prefetchable Memory Base: These 12 bits are compared with bits P_AD[31:20] ** of the incoming address to determine the lower 1MB aligned value (inclusive) ** of the range. ** The incoming address must be greater than or equal to this value. ** For the purposes of address decoding the lower 20 address bits (P_AD[19:0]) ** are assumed to be 0 0000h. ** 03:00 1h 64-bit Indicator: Indicates that 64-bit addressing is supported. **============================================================================== */ #define ARCMSR_PCI2PCI_PREFETCHABLE_MEMORY_BASE_REG 0x24 /*word: 0x25,0x24 */ #define ARCMSR_PCI2PCI_PREFETCHABLE_MEMORY_LIMIT_REG 0x26 /*word: 0x27,0x26 */ /* **============================================================================== ** 0x2b-0x28 : ** Bit Default Description ** 31:00 00000000h Prefetchable Memory Base Upper Portion: All bits are read/writable ** bridge supports full 64-bit addressing. **============================================================================== */ #define ARCMSR_PCI2PCI_PREFETCHABLE_MEMORY_BASE_UPPER32_REG 0x28 /*dword: 0x2b,0x2a,0x29,0x28 */ /* **============================================================================== ** 0x2f-0x2c : ** Bit Default Description ** 31:00 00000000h Prefetchable Memory Limit Upper Portion: All bits are read/writable ** bridge supports full 64-bit addressing. **============================================================================== */ #define ARCMSR_PCI2PCI_PREFETCHABLE_MEMORY_LIMIT_UPPER32_REG 0x2C /*dword: 0x2f,0x2e,0x2d,0x2c */ /* **============================================================================== ** 0x33-0x30 : ** Bit Default Description ** 07:00 DCh Capabilities Pointer: Pointer to the first CAP ID entry in the capabilities list is at DCh in PCI configuration ** space. (Power Management Capability Registers) **============================================================================== */ #define ARCMSR_PCI2PCI_CAPABILITIES_POINTER_REG 0x34 /*byte*/ /* **============================================================================== ** 0x3b-0x35 : reserved **============================================================================== */ /* **============================================================================== ** 0x3d-0x3c : ** ** Bit Default Description ** 15:08 00h Interrupt Pin (PIN): Bridges do not support the generation of interrupts. ** 07:00 00h Interrupt Line (LINE): The bridge does not generate interrupts, so this is reserved as '00h'. **============================================================================== */ #define ARCMSR_PCI2PCI_PRIMARY_INTERRUPT_LINE_REG 0x3C /*byte*/ #define ARCMSR_PCI2PCI_PRIMARY_INTERRUPT_PIN_REG 0x3D /*byte*/ /* **============================================================================== ** 0x3f-0x3e : ** Bit Default Description ** 15:12 0h Reserved ** 11 0b Discard Timer SERR# Enable: Controls the generation of SERR# on the primary interface (P_SERR#) in response ** to a timer discard on either the primary or secondary interface. ** 0b=SERR# is not asserted. ** 1b=SERR# is asserted. ** 10 0b Discard Timer Status (DTS): This bit is set to a '1b' when either the primary or secondary discard timer expires. ** The delayed completion is then discarded. ** 09 0b Secondary Discard Timer (SDT): Sets the maximum number of PCI clock cycles ** that bridge waits for an initiator on the secondary bus ** to repeat a delayed transaction request. ** The counter starts when the delayed transaction completion is ready ** to be returned to the initiator. ** When the initiator has not repeated the transaction ** at least once before the counter expires,bridge ** discards the delayed transaction from its queues. ** 0b=The secondary master time-out counter is 2 15 PCI clock cycles. ** 1b=The secondary master time-out counter is 2 10 PCI clock cycles. ** 08 0b Primary Discard Timer (PDT): Sets the maximum number of PCI clock cycles ** that bridge waits for an initiator on the primary bus ** to repeat a delayed transaction request. ** The counter starts when the delayed transaction completion ** is ready to be returned to the initiator. ** When the initiator has not repeated the transaction ** at least once before the counter expires, ** bridge discards the delayed transaction from its queues. ** 0b=The primary master time-out counter is 2 15 PCI clock cycles. ** 1b=The primary master time-out counter is 2 10 PCI clock cycles. ** 07 0b Fast Back-to-Back Enable (FBE): The bridge does not initiate back to back transactions. ** 06 0b Secondary Bus Reset (SBR): ** When cleared to 0b: The bridge deasserts S_RST#, ** when it had been asserted by writing this bit to a 1b. ** When set to 1b: The bridge asserts S_RST#. ** 05 0b Master Abort Mode (MAM): Dictates bridge behavior on the initiator bus ** when a master abort termination occurs in response to ** a delayed transaction initiated by bridge on the target bus. ** 0b=The bridge asserts TRDY# in response to a non-locked delayed transaction, ** and returns FFFF FFFFh when a read. ** 1b=When the transaction had not yet been completed on the initiator bus ** (e.g.,delayed reads, or non-posted writes), ** then bridge returns a Target Abort in response to the original requester ** when it returns looking for its delayed completion on the initiator bus. ** When the transaction had completed on the initiator bus (e.g., a PMW), ** then bridge asserts P_SERR# (when enabled). ** For PCI-X transactions this bit is an enable for the assertion of P_SERR# due to a master abort ** while attempting to deliver a posted memory write on the destination bus. ** 04 0b VGA Alias Filter Enable: This bit dictates bridge behavior in conjunction with the VGA enable bit ** (also of this register), ** and the VGA Palette Snoop Enable bit (Command Register). ** When the VGA enable, or VGA Palette Snoop enable bits are on (i.e., 1b) ** the VGA Aliasing bit for the corresponding enabled functionality,: ** 0b=Ignores address bits AD[15:10] when decoding VGA I/O addresses. ** 1b=Ensures that address bits AD[15:10] equal 000000b when decoding VGA I/O addresses. ** When all VGA cycle forwarding is disabled, (i.e., VGA Enable bit =0b and VGA Palette Snoop bit =0b), ** then this bit has no impact on bridge behavior. ** 03 0b VGA Enable: Setting this bit enables address decoding ** and transaction forwarding of the following VGA transactions from the primary bus ** to the secondary bus: ** frame buffer memory addresses 000A0000h:000BFFFFh, ** VGA I/O addresses 3B0:3BBh and 3C0h:3DFh, where AD[31:16]=Ħ§0000h?** ?and AD[15:10] are either not decoded (i.e., don't cares), ** or must be Ħ§000000bĦ¨ ** depending upon the state of the VGA Alias Filter Enable bit. (bit(4) of this register) ** I/O and Memory Enable bits must be set in the Command register ** to enable forwarding of VGA cycles. ** 02 0b ISA Enable: Setting this bit enables special handling ** for the forwarding of ISA I/O transactions that fall within the address range ** specified by the I/O Base and Limit registers, ** and are within the lowest 64Kbyte of the I/O address map ** (i.e., 0000 0000h - 0000 FFFFh). ** 0b=All I/O transactions that fall within the I/O Base ** and Limit registers' specified range are forwarded ** from primary to secondary unfiltered. ** 1b=Blocks the forwarding from primary to secondary ** of the top 768 bytes of each 1Kbyte alias. ** On the secondary the top 768 bytes of each 1K alias ** are inversely decoded and forwarded ** from secondary to primary. ** 01 0b SERR# Forward Enable: 0b=The bridge does not assert P_SERR# as a result of an S_SERR# assertion. ** 1b=The bridge asserts P_SERR# whenever S_SERR# is detected ** asserted provided the SERR# Enable bit is set (PCI Command Register bit(8)=1b). ** 00 0b Parity Error Response: This bit controls bridge response to a parity error ** that is detected on its secondary interface. ** 0b=When a data parity error is detected bridge does not assert S_PERR#. ** Also bridge does not assert P_SERR# in response to a detected address ** or attribute parity error. ** 1b=When a data parity error is detected bridge asserts S_PERR#. ** The bridge also asserts P_SERR# (when enabled globally via bit(8) ** of the Command register) ** in response to a detected address or attribute parity error. **============================================================================== */ #define ARCMSR_PCI2PCI_BRIDGE_CONTROL_REG 0x3E /*word*/ /* ************************************************************************** ** Device Specific Registers 40-A7h ************************************************************************** ** ---------------------------------------------------------------------------------------------------------- ** | Byte 3 | Byte 2 | Byte 1 | Byte 0 | Configu-ration Byte Offset ** ---------------------------------------------------------------------------------------------------------- ** | Bridge Control 0 | Arbiter Control/Status | Reserved | 40h ** ---------------------------------------------------------------------------------------------------------- ** | Bridge Control 2 | Bridge Control 1 | 44h ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | Bridge Status | 48h ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | 4Ch ** ---------------------------------------------------------------------------------------------------------- ** | Prefetch Policy | Multi-Transaction Timer | 50h ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | Pre-boot Status | P_SERR# Assertion Control | 54h ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | Reserved | Secondary Decode Enable | 58h ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | Secondary IDSEL | 5Ch ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | 5Ch ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | 68h:CBh ** ---------------------------------------------------------------------------------------------------------- ************************************************************************** **============================================================================== ** 0x42-0x41: Secondary Arbiter Control/Status Register - SACSR ** Bit Default Description ** 15:12 1111b Grant Time-out Violator: This field indicates the agent that violated the Grant Time-out rule ** (PCI=16 clocks,PCI-X=6 clocks). ** Note that this field is only meaningful when: ** # Bit[11] of this register is set to 1b, ** indicating that a Grant Time-out violation had occurred. ** # bridge internal arbiter is enabled. ** Bits[15:12] Violating Agent (REQ#/GNT# pair number) ** 0000b REQ#/GNT#[0] ** 0001b REQ#/GNT#[1] ** 0010b REQ#/GNT#[2] ** 0011b REQ#/GNT#[3] ** 1111b Default Value (no violation detected) ** When bit[11] is cleared by software, this field reverts back to its default value. ** All other values are Reserved ** 11 0b Grant Time-out Occurred: When set to 1b, ** this indicates that a Grant Time-out error had occurred involving one of the secondary bus agents. ** Software clears this bit by writing a 1b to it. ** 10 0b Bus Parking Control: 0=During bus idle, bridge parks the bus on the last master to use the bus. ** 1=During bus idle, bridge parks the bus on itself. ** The bus grant is removed from the last master and internally asserted to bridge. ** 09:08 00b Reserved ** 07:00 0000 0000b Secondary Bus Arbiter Priority Configuration: The bridge secondary arbiter provides two rings of arbitration priority. ** Each bit of this field assigns its corresponding secondary ** bus master to either the high priority arbiter ring (1b) ** or to the low priority arbiter ring (0b). ** Bits [3:0] correspond to request inputs S_REQ#[3:0], respectively. ** Bit [6] corresponds to the bridge internal secondary bus request ** while Bit [7] corresponds to the SATU secondary bus request. ** Bits [5:4] are unused. ** 0b=Indicates that the master belongs to the low priority group. ** 1b=Indicates that the master belongs to the high priority group **================================================================================= ** 0x43: Bridge Control Register 0 - BCR0 ** Bit Default Description ** 07 0b Fully Dynamic Queue Mode: 0=The number of Posted write transactions is limited to eight ** and the Posted Write data is limited to 4KB. ** 1=Operation in fully dynamic queue mode. The bridge enqueues up to ** 14 Posted Memory Write transactions and 8KB of posted write data. ** 06:03 0H Reserved. ** 02 0b Upstream Prefetch Disable: This bit disables bridge ability ** to perform upstream prefetch operations for Memory ** Read requests received on its secondary interface. ** This bit also controls the bridge's ability to generate advanced read commands ** when forwarding a Memory Read Block transaction request upstream from a PCI-X bus ** to a Conventional PCI bus. ** 0b=bridge treats all upstream Memory Read requests as though they target prefetchable memory. ** The use of Memory Read Line and Memory Read ** Multiple is enabled when forwarding a PCI-X Memory Read Block request ** to an upstream bus operating in Conventional PCI mode. ** 1b=bridge treats upstream PCI Memory Read requests as though ** they target non-prefetchable memory and forwards upstream PCI-X Memory ** Read Block commands as Memory Read ** when the primary bus is operating ** in Conventional PCI mode. ** NOTE: This bit does not affect bridge ability to perform read prefetching ** when the received command is Memory Read Line or Memory Read Multiple. **================================================================================= ** 0x45-0x44: Bridge Control Register 1 - BCR1 (Sheet 2 of 2) ** Bit Default Description ** 15:08 0000000b Reserved ** 07:06 00b Alias Command Mapping: This two bit field determines how bridge handles PCI-X Ħ§AliasĦ¨ commands, ** specifically the Alias to Memory Read Block and Alias to Memory Write Block commands. ** The three options for handling these alias commands are to either pass it as is, ** re-map to the actual block memory read/write command encoding, or ignore ** the transaction forcing a Master Abort to occur on the Origination Bus. ** Bit (7:6) Handling of command ** 0 0 Re-map to Memory Read/Write Block before forwarding ** 0 1 Enqueue and forward the alias command code unaltered ** 1 0 Ignore the transaction, forcing Master Abort ** 1 1 Reserved ** 05 1b Watchdog Timers Disable: Disables or enables all 2 24 Watchdog Timers in both directions. ** The watchdog timers are used to detect prohibitively long latencies in the system. ** The watchdog timer expires when any Posted Memory Write (PMW), Delayed Request, ** or Split Requests (PCI-X mode) is not completed within 2 24 events ** (Ħ§eventsĦ¨ are defined as PCI Clocks when operating in PCI-X mode, ** and as the number of times being retried when operating in Conventional PCI mode) ** 0b=All 2 24 watchdog timers are enabled. ** 1b=All 2 24 watchdog timers are disabled and there is no limits to ** the number of attempts bridge makes when initiating a PMW, ** transacting a Delayed Transaction, or how long it waits for ** a split completion corresponding to one of its requests. ** 04 0b GRANT# time-out disable: This bit enables/disables the GNT# time-out mechanism. ** Grant time-out is 16 clocks for conventional PCI, and 6 clocks for PCI-X. ** 0b=The Secondary bus arbiter times out an agent ** that does not assert FRAME# within 16/6 clocks of receiving its grant, ** once the bus has gone idle. ** The time-out counter begins as soon as the bus goes idle with the new GNT# asserted. ** An infringing agent does not receive a subsequent GNT# ** until it de-asserts its REQ# for at least one clock cycle. ** 1b=GNT# time-out mechanism is disabled. ** 03 00b Reserved. ** 02 0b Secondary Discard Timer Disable: This bit enables/disables bridge secondary delayed transaction discard mechanism. ** The time out mechanism is used to ensure that initiators ** of delayed transactions return for their delayed completion data/status ** within a reasonable amount of time after it is available from bridge. ** 0b=The secondary master time-out counter is enabled ** and uses the value specified by the Secondary Discard Timer bit ** (see Bridge Control Register). ** 1b=The secondary master time-out counter is disabled. ** The bridge waits indefinitely for a secondary bus master ** to repeat a delayed transaction. ** 01 0b Primary Discard Timer Disable: This bit enables/disables bridge primary delayed transaction discard mechanism. ** The time out mechanism is used to ensure that initiators ** of delayed transactions return for their delayed completion data/status ** within a reasonable amount of time after it is available from bridge. ** 0b=The primary master time-out counter is enabled and uses the value specified ** by the Primary Discard Timer bit (see Bridge Control Register). ** 1b=The secondary master time-out counter is disabled. ** The bridge waits indefinitely for a secondary bus master ** to repeat a delayed transaction. ** 00 0b Reserved **================================================================================= ** 0x47-0x46: Bridge Control Register 2 - BCR2 ** Bit Default Description ** 15:07 0000b Reserved. ** 06 0b Global Clock Out Disable (External Secondary Bus Clock Source Enable): ** This bit disables all of the secondary PCI clock outputs including ** the feedback clock S_CLKOUT. ** This means that the user is required to provide an S_CLKIN input source. ** 05:04 11 (66 MHz) Preserved. ** 01 (100 MHz) ** 00 (133 MHz) ** 03:00 Fh (100 MHz & 66 MHz) ** 7h (133 MHz) ** This 4 bit field provides individual enable/disable mask bits for each of bridge ** secondary PCI clock outputs. Some, or all secondary clock outputs (S_CLKO[3:0]) ** default to being enabled following the rising edge of P_RST#, depending on the ** frequency of the secondary bus clock: ** ĦE Designs with 100 MHz (or lower) Secondary PCI clock power up with ** all four S_CLKOs enabled by default. (SCLKO[3:0])ĦP ** ĦE Designs with 133 MHz Secondary PCI clock power up ** with the lower order 3 S_CLKOs enabled by default. ** (S_CLKO[2:0]) Only those SCLKs that power up enabled by can be connected ** to downstream device clock inputs. **================================================================================= ** 0x49-0x48: Bridge Status Register - BSR ** Bit Default Description ** 15 0b Upstream Delayed Transaction Discard Timer Expired: This bit is set to a 1b and P_SERR# ** is conditionally asserted when the secondary discard timer expires. ** 14 0b Upstream Delayed/Split Read Watchdog Timer Expired: ** Conventional PCI Mode: This bit is set to a 1b and P_SERR# ** is conditionally asserted when bridge discards an upstream delayed read ** ** transaction request after 2 24 retries following the initial retry. ** PCI-X Mode: This bit is set to a 1b and P_SERR# is conditionally asserted ** when bridge discards an upstream split read request ** after waiting in excess of 2 24 clocks for the corresponding ** Split Completion to arrive. ** 13 0b Upstream Delayed/Split Write Watchdog Timer Expired: ** Conventional PCI Mode: This bit is set to a 1b and P_SERR# ** is conditionally asserted when bridge discards an upstream delayed write ** ** transaction request after 2 24 retries following the initial retry. ** PCI-X Mode: This bit is set to a 1b and P_SERR# ** is conditionally asserted when bridge discards an upstream split write request ** after waiting in excess of 2 24 clocks for the corresponding ** Split Completion to arrive. ** 12 0b Master Abort during Upstream Posted Write: This bit is set to a 1b and P_SERR# ** is conditionally asserted when a Master Abort occurs as a result of an attempt, ** by bridge, to retire a PMW upstream. ** 11 0b Target Abort during Upstream Posted Write: This bit is set to a 1b and P_SERR# ** is conditionally asserted when a Target Abort occurs as a result of an attempt, ** by bridge, to retire a PMW upstream. ** 10 0b Upstream Posted Write Data Discarded: This bit is set to a 1b and P_SERR# ** is conditionally asserted when bridge discards an upstream PMW transaction ** after receiving 2 24 target retries from the primary bus target ** 09 0b Upstream Posted Write Data Parity Error: This bit is set to a 1b and P_SERR# ** is conditionally asserted when a data parity error is detected by bridge ** while attempting to retire a PMW upstream ** 08 0b Secondary Bus Address Parity Error: This bit is set to a 1b and P_SERR# ** is conditionally asserted when bridge detects an address parity error on ** the secondary bus. ** 07 0b Downstream Delayed Transaction Discard Timer Expired: This bit is set to a 1b and P_SERR# ** is conditionally asserted when the primary bus discard timer expires. ** 06 0b Downstream Delayed/Split Read Watchdog Timer Expired: ** Conventional PCI Mode: This bit is set to a 1b and P_SERR# ** is conditionally asserted when bridge discards a downstream delayed read ** ** transaction request after receiving 2 24 target retries ** from the secondary bus target. ** PCI-X Mode: This bit is set to a 1b and P_SERR# is conditionally asserted ** when bridge discards a downstream split read request ** after waiting in excess of 2 24 clocks for the corresponding ** Split Completion to arrive. ** 05 0b Downstream Delayed Write/Split Watchdog Timer Expired: ** Conventional PCI Mode: This bit is set to a 1b and P_SERR# is conditionally asserted ** when bridge discards a downstream delayed write transaction request ** after receiving 2 24 target retries from the secondary bus target. ** PCI-X Mode: This bit is set to a 1b and P_SERR# ** is conditionally asserted when bridge discards a downstream ** split write request after waiting in excess of 2 24 clocks ** for the corresponding Split Completion to arrive. ** 04 0b Master Abort during Downstream Posted Write: This bit is set to a 1b and P_SERR# ** is conditionally asserted when a Master Abort occurs as a result of an attempt, ** by bridge, to retire a PMW downstream. ** 03 0b Target Abort during Downstream Posted Write: This bit is set to a 1b and P_SERR# is conditionally asserted ** when a Target Abort occurs as a result of an attempt, by bridge, ** to retire a PMW downstream. ** 02 0b Downstream Posted Write Data Discarded: This bit is set to a 1b and P_SERR# ** is conditionally asserted when bridge discards a downstream PMW transaction ** after receiving 2 24 target retries from the secondary bus target ** 01 0b Downstream Posted Write Data Parity Error: This bit is set to a 1b and P_SERR# ** is conditionally asserted when a data parity error is detected by bridge ** while attempting to retire a PMW downstream. ** 00 0b Primary Bus Address Parity Error: This bit is set to a 1b and P_SERR# is conditionally asserted ** when bridge detects an address parity error on the primary bus. **================================================================================== ** 0x51-0x50: Bridge Multi-Transaction Timer Register - BMTTR ** Bit Default Description ** 15:13 000b Reserved ** 12:10 000b GRANT# Duration: This field specifies the count (PCI clocks) ** that a secondary bus master has its grant maintained in order to enable ** multiple transactions to execute within the same arbitration cycle. ** Bit[02:00] GNT# Extended Duration ** 000 MTT Disabled (Default=no GNT# extension) ** 001 16 clocks ** 010 32 clocks ** 011 64 clocks ** 100 128 clocks ** 101 256 clocks ** 110 Invalid (treated as 000) ** 111 Invalid (treated as 000) ** 09:08 00b Reserved ** 07:00 FFh MTT Mask: This field enables/disables MTT usage for each REQ#/GNT# ** pair supported by bridge secondary arbiter. ** Bit(7) corresponds to SATU internal REQ#/GNT# pair, ** bit(6) corresponds to bridge internal REQ#/GNT# pair, ** bit(5) corresponds to REQ#/GNT#(5) pair, etc. ** When a given bit is set to 1b, its corresponding REQ#/GNT# ** pair is enabled for MTT functionality as determined by bits(12:10) of this register. ** When a given bit is cleared to 0b, its corresponding REQ#/GNT# pair is disabled from using the MTT. **================================================================================== ** 0x53-0x52: Read Prefetch Policy Register - RPPR ** Bit Default Description ** 15:13 000b ReRead_Primary Bus: 3-bit field indicating the multiplication factor ** to be used in calculating the number of bytes to prefetch from the secondary bus interface on ** subsequent PreFetch operations given that the read demands were not satisfied ** using the FirstRead parameter. ** The default value of 000b correlates to: Command Type Hardwired pre-fetch amount Memory Read 4 DWORDs ** Memory Read Line 1 cache lines Memory Read Multiple 2 cache lines ** 12:10 000b FirstRead_Primary Bus: 3-bit field indicating the multiplication factor to be used in calculating ** the number of bytes to prefetch from the secondary bus interface ** on the initial PreFetch operation. ** The default value of 000b correlates to: Command Type Hardwired pre-fetch amount Memory Read 4 DWORDs ** Memory Read Line 1 cache line Memory Read Multiple 2 cache lines ** 09:07 010b ReRead_Secondary Bus: 3-bit field indicating the multiplication factor to be used ** in calculating the number of bytes to prefetch from the primary ** bus interface on subsequent PreFetch operations given ** that the read demands were not satisfied using ** the FirstRead parameter. ** The default value of 010b correlates to: Command Type Hardwired pre-fetch a ** mount Memory Read 3 cache lines Memory Read Line 3 cache lines ** Memory Read Multiple 6 cache lines ** 06:04 000b FirstRead_Secondary Bus: 3-bit field indicating the multiplication factor to be used ** in calculating the number of bytes to prefetch from ** the primary bus interface on the initial PreFetch operation. ** The default value of 000b correlates to: Command Type Hardwired pre-fetch amount ** Memory Read 4 DWORDs Memory Read Line 1 cache line Memory Read Multiple 2 cache lines ** 03:00 1111b Staged Prefetch Enable: This field enables/disables the FirstRead/ReRead pre-fetch ** algorithm for the secondary and the primary bus interfaces. ** Bit(3) is a ganged enable bit for REQ#/GNT#[7:3], and bits(2:0) provide individual ** enable bits for REQ#/GNT#[2:0]. ** (bit(2) is the enable bit for REQ#/GNT#[2], etc...) ** 1b: enables the staged pre-fetch feature ** 0b: disables staged pre-fetch, ** and hardwires read pre-fetch policy to the following for ** Memory Read, ** Memory Read Line, ** and Memory Read Multiple commands: ** Command Type Hardwired Pre-Fetch Amount... ** Memory Read 4 DWORDs ** Memory Read Line 1 cache line ** Memory Read Multiple 2 cache lines ** NOTE: When the starting address is not cache line aligned, bridge pre-fetches Memory Read line commands ** only to the next higher cache line boundary.For non-cache line aligned Memory Read ** Multiple commands bridge pre-fetches only to the second cache line boundary encountered. **================================================================================== ** 0x55-0x54: P_SERR# Assertion Control - SERR_CTL ** Bit Default Description ** 15 0b Upstream Delayed Transaction Discard Timer Expired: Dictates the bridge behavior ** in response to its discarding of a delayed transaction that was initiated from the primary bus. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 14 0b Upstream Delayed/Split Read Watchdog Timer Expired: Dictates bridge behavior following expiration of the subject watchdog timer. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 13 0b Upstream Delayed/Split Write Watchdog Timer Expired: Dictates bridge behavior following expiration of the subject watchdog timer. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 12 0b Master Abort during Upstream Posted Write: Dictates bridge behavior following ** its having detected a Master Abort while attempting to retire one of its PMWs upstream. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 11 0b Target Abort during Upstream Posted Write: Dictates bridge behavior following ** its having been terminated with Target Abort while attempting to retire one of its PMWs upstream. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 10 0b Upstream Posted Write Data Discarded: Dictates bridge behavior in the event that ** it discards an upstream posted write transaction. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 09 0b Upstream Posted Write Data Parity Error: Dictates bridge behavior ** when a data parity error is detected while attempting to retire on of its PMWs upstream. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 08 0b Secondary Bus Address Parity Error: This bit dictates bridge behavior ** when it detects an address parity error on the secondary bus. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 07 0b Downstream Delayed Transaction Discard Timer Expired: Dictates bridge behavior in response to ** its discarding of a delayed transaction that was initiated on the secondary bus. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 06 0b Downstream Delayed/Split Read Watchdog Timer Expired: Dictates bridge behavior following expiration of the subject watchdog timer. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 05 0b Downstream Delayed/Split Write Watchdog Timer Expired: Dictates bridge behavior following expiration of the subject watchdog timer. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 04 0b Master Abort during Downstream Posted Write: Dictates bridge behavior following ** its having detected a Master Abort while attempting to retire one of its PMWs downstream. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 03 0b Target Abort during Downstream Posted Write: Dictates bridge behavior following ** its having been terminated with Target Abort while attempting to retire one of its PMWs downstream. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 02 0b Downstream Posted Write Data Discarded: Dictates bridge behavior in the event ** that it discards a downstream posted write transaction. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 01 0b Downstream Posted Write Data Parity Error: Dictates bridge behavior ** when a data parity error is detected while attempting to retire on of its PMWs downstream. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# ** 00 0b Primary Bus Address Parity Error: This bit dictates bridge behavior ** when it detects an address parity error on the primary bus. ** 0b=bridge asserts P_SERR#. ** 1b=bridge does not assert P_SERR# **=============================================================================== ** 0x56: Pre-Boot Status Register - PBSR ** Bit Default Description ** 07 1 Reserved ** 06 - Reserved - value indeterminate ** 05:02 0 Reserved ** 01 Varies with External State of S_133EN at PCI Bus Reset Secondary Bus Max Frequency Setting: ** This bit reflect captured S_133EN strap, ** indicating the maximum secondary bus clock frequency when in PCI-X mode. ** Max Allowable Secondary Bus Frequency ** ** S_133EN PCI-X Mode ** ** 0 100 MHz ** ** 1 133 MH ** 00 0b Reserved **=============================================================================== ** 0x59-0x58: Secondary Decode Enable Register - SDER ** Bit Default Description ** 15:03 FFF1h Preserved. ** 02 Varies with External State of PRIVMEM at PCI Bus Reset Private Memory Space Enable - when set, ** bridge overrides its secondary inverse decode logic and not ** forward upstream any secondary bus initiated DAC Memory transactions with AD(63)=1b. ** This creates a private memory space on the Secondary PCI bus ** that allows peer-to-peer transactions. ** 01:00 10 2 Preserved. **=============================================================================== ** 0x5D-0x5C: Secondary IDSEL Select Register - SISR ** Bit Default Description ** 15:10 000000 2 Reserved. ** 09 Varies with External State of PRIVDEV at PCI Bus Reset AD25- IDSEL Disable - When this bit is set, ** AD25 is deasserted for any possible Type 1 to Type 0 conversion. ** When this bit is clear, ** AD25 is asserted when Primary addresses AD[15:11]=01001 2 during a Type 1 to Type 0 conversion. ** 08 Varies with External State of PRIVDEV at PCI Bus Reset AD24- IDSEL Disable - When this bit is set, ** AD24 is deasserted for any possible Type 1 to Type 0 conversion. ** When this bit is clear, ** AD24 is asserted when Primary addresses AD[15:11]=01000 2 during a Type 1 to Type 0 conversion. ** 07 Varies with External State of PRIVDEV at PCI Bus Reset AD23- IDSEL Disable - When this bit is set, ** AD23 is deasserted for any possible Type 1 to Type 0 conversion. ** When this bit is clear, ** AD23 is asserted when Primary addresses AD[15:11]=00111 2 during a Type 1 to Type 0 conversion. ** 06 Varies with External State of PRIVDEV at PCI Bus Reset AD22- IDSEL Disable - When this bit is set, ** AD22 is deasserted for any possible Type 1 to Type 0 conversion. ** When this bit is clear, ** AD22 is asserted when Primary addresses AD[15:11]=00110 2 during a Type 1 to Type 0 conversion. ** 05 Varies with External State of PRIVDEV at PCI Bus Reset AD21- IDSEL Disable - When this bit is set, ** AD21 is deasserted for any possible Type 1 to Type 0 conversion. ** When this bit is clear, ** AD21 is asserted when Primary addresses AD[15:11]=00101 2 during a Type 1 to Type 0 conversion. ** 04 Varies with External State of PRIVDEV at PCI Bus Reset AD20- IDSEL Disable - When this bit is set, ** AD20 is deasserted for any possible Type 1 to Type 0 conversion. ** When this bit is clear, ** AD20 is asserted when Primary addresses AD[15:11]=00100 2 during a Type 1 to Type 0 conversion. ** 03 Varies with External State of PRIVDEV at PCI Bus Reset AD19- IDSEL Disable - When this bit is set, ** AD19 is deasserted for any possible Type 1 to Type 0 conversion. ** When this bit is clear, ** AD19 is asserted when Primary addresses AD[15:11]=00011 2 during a Type 1 to Type 0 conversion. ** 02 Varies with External State of PRIVDEV at PCI Bus Reset AD18- IDSEL Disable - When this bit is set, ** AD18 is deasserted for any possible Type 1 to Type 0 conversion. ** When this bit is clear, ** AD18 is asserted when Primary addresses AD[15:11]=00010 2 during a Type 1 to Type 0 conversion. ** 01 Varies with External State of PRIVDEV at PCI Bus Reset AD17- IDSEL Disable - When this bit is set, ** AD17 is deasserted for any possible Type 1 to Type 0 conversion. ** When this bit is clear, ** AD17 is asserted when Primary addresses AD[15:11]=00001 2 during a Type 1 to Type 0 conversion. ** 00 Varies with External State of PRIVDEV at PCI Bus Reset AD16- IDSEL Disable - When this bit is set, ** AD16 is deasserted for any possible Type 1 to Type 0 conversion. ** When this bit is clear, ** AD16 is asserted when Primary addresses AD[15:11]=00000 2 during a Type 1 to Type 0 conversion. ************************************************************************** */ /* ************************************************************************** ** Reserved A8-CBh ************************************************************************** */ /* ************************************************************************** ** PCI Extended Enhanced Capabilities List CC-FFh ************************************************************************** ** ---------------------------------------------------------------------------------------------------------- ** | Byte 3 | Byte 2 | Byte 1 | Byte 0 | Configu-ration Byte Offset ** ---------------------------------------------------------------------------------------------------------- ** | Power Management Capabilities | Next Item Ptr | Capability ID | DCh ** ---------------------------------------------------------------------------------------------------------- ** | PM Data | PPB Support | Extensions Power Management CSR | E0h ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | Reserved | Reserved | E4h ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | E8h ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | Reserved | Reserved | Reserved | ECh ** ---------------------------------------------------------------------------------------------------------- ** | PCI-X Secondary Status | Next Item Ptr | Capability ID | F0h ** ---------------------------------------------------------------------------------------------------------- ** | PCI-X Bridge Status | F4h ** ---------------------------------------------------------------------------------------------------------- ** | PCI-X Upstream Split Transaction Control | F8h ** ---------------------------------------------------------------------------------------------------------- ** | PCI-X Downstream Split Transaction Control | FCh ** ---------------------------------------------------------------------------------------------------------- **=============================================================================== ** 0xDC: Power Management Capabilities Identifier - PM_CAPID ** Bit Default Description ** 07:00 01h Identifier (ID): PCI SIG assigned ID for PCI-PM register block **=============================================================================== ** 0xDD: Next Item Pointer - PM_NXTP ** Bit Default Description ** 07:00 F0H Next Capabilities Pointer (PTR): The register defaults to F0H pointing to the PCI-X Extended Capability Header. **=============================================================================== ** 0xDF-0xDE: Power Management Capabilities Register - PMCR ** Bit Default Description ** 15:11 00h PME Supported (PME): PME# cannot be asserted by bridge. ** 10 0h State D2 Supported (D2): Indicates no support for state D2. No power management action in this state. ** 09 1h State D1 Supported (D1): Indicates support for state D1. No power management action in this state. ** 08:06 0h Auxiliary Current (AUXC): This 3 bit field reports the 3.3Vaux auxiliary current requirements for the PCI function. ** This returns 000b as PME# wake-up for bridge is not implemented. ** 05 0 Special Initialization Required (SINT): Special initialization is not required for bridge. ** 04:03 00 Reserved ** 02:00 010 Version (VS): Indicates that this supports PCI Bus Power Management Interface Specification, Revision 1.1. **=============================================================================== ** 0xE1-0xE0: Power Management Control / Status - Register - PMCSR ** Bit Default Description ** 15:09 00h Reserved ** 08 0b PME_Enable: This bit, when set to 1b enables bridge to assert PME#. ** Note that bridge never has occasion to assert PME# and implements this dummy R/W bit only for the purpose of working around an OS PCI-PM bug. ** 07:02 00h Reserved ** 01:00 00 Power State (PSTATE): This 2-bit field is used both to determine the current power state of ** a function and to set the Function into a new power state. ** 00 - D0 state ** 01 - D1 state ** 10 - D2 state ** 11 - D3 hot state **=============================================================================== ** 0xE2: Power Management Control / Status PCI to PCI Bridge Support - PMCSR_BSE ** Bit Default Description ** 07 0 Bus Power/Clock Control Enable (BPCC_En): Indicates that the bus power/clock control policies have been disabled. ** 06 0 B2/B3 support for D3 Hot (B2_B3#): The state of this bit determines the action that ** is to occur as a direct result of programming the function to D3 hot. ** This bit is only meaningful when bit 7 (BPCC_En) is a Ħ§1Ħ¨. ** 05:00 00h Reserved **=============================================================================== ** 0xE3: Power Management Data Register - PMDR ** Bit Default Description ** 07:00 00h Reserved **=============================================================================== ** 0xF0: PCI-X Capabilities Identifier - PX_CAPID ** Bit Default Description ** 07:00 07h Identifier (ID): Indicates this is a PCI-X capabilities list. **=============================================================================== ** 0xF1: Next Item Pointer - PX_NXTP ** Bit Default Description ** 07:00 00h Next Item Pointer: Points to the next capability in the linked list The power on default value of this ** register is 00h indicating that this is the last entry in the linked list of capabilities. **=============================================================================== ** 0xF3-0xF2: PCI-X Secondary Status - PX_SSTS ** Bit Default Description ** 15:09 00h Reserved ** 08:06 Xxx Secondary Clock Frequency (SCF): This field is set with the frequency of the secondary bus. ** The values are: ** ** BitsMax FrequencyClock Period ** ** 000PCI ModeN/A ** ** 00166 15 ** ** 01010010 ** ** 0111337.5 ** ** 1xxreservedreserved ** ** The default value for this register is the operating frequency of the secondary bus ** 05 0b Split Request Delayed. (SRD): This bit is supposed to be set by a bridge when it cannot forward a transaction on the ** secondary bus to the primary bus because there is not enough room within the limit ** specified in the Split Transaction Commitment Limit field in the Downstream Split ** Transaction Control register. The bridge does not set this bit. ** 04 0b Split Completion Overrun (SCO): This bit is supposed to be set when a bridge terminates a Split Completion on the ** ** secondary bus with retry or Disconnect at next ADB because its buffers are full. ** The bridge does not set this bit. ** 03 0b Unexpected Split Completion (USC): This bit is set when an unexpected split completion with a requester ID ** equal to bridge secondary bus number, device number 00h, ** and function number 0 is received on the secondary interface. ** This bit is cleared by software writing a '1'. ** 02 0b Split Completion Discarded (SCD): This bit is set ** when bridge discards a split completion moving toward the secondary bus ** because the requester would not accept it. This bit cleared by software writing a '1'. ** 01 1b 133 MHz Capable: Indicates that bridge is capable of running its secondary bus at 133 MHz ** 00 1b 64-bit Device (D64): Indicates the width of the secondary bus as 64-bits. **=============================================================================== ** 0xF7-0xF6-0xf5-0xF4: PCI-X Bridge Status - PX_BSTS ** Bit Default Description ** 31:22 0 Reserved ** 21 0 Split Request Delayed (SRD): This bit does not be set by bridge. ** 20 0 Split Completion Overrun (SCO): This bit does not be set by bridge ** because bridge throttles traffic on the completion side. ** 19 0 Unexpected Split Completion (USC): The bridge sets this bit to 1b ** when it encounters a corrupted Split Completion, possibly with an ** ** inconsistent remaining byte count.Software clears ** this bit by writing a 1b to it. ** 18 0 Split Completion Discarded (SCD): The bridge sets this bit to 1b ** when it has discarded a Split Completion.Software clears this bit by ** ** writing a 1b to it. ** 17 1 133 MHz Capable: This bit indicates that the bridge primary interface is ** capable of 133 MHz operation in PCI-X mode. ** 0=The maximum operating frequency is 66 MHz. ** 1=The maximum operating frequency is 133 MHz. ** 16 Varies with the external state of P_32BITPCI# at PCI Bus Reset 64-bit Device (D64): Indicates bus width of the Primary PCI bus interface. ** 0=Primary Interface is connected as a 32-bit PCI bus. ** 1=Primary Interface is connected as a 64-bit PCI bus. ** 15:08 00h Bus Number (BNUM): This field is simply an alias to the PBN field ** of the BNUM register at offset 18h. ** Apparently it was deemed necessary reflect it here for diagnostic purposes. ** 07:03 1fh Device Number (DNUM): Indicates which IDSEL bridge consumes. ** May be updated whenever a PCI-X ** configuration write cycle that targets bridge scores a hit. ** 02:00 0h Function Number (FNUM): The bridge Function # **=============================================================================== ** 0xFB-0xFA-0xF9-0xF8: PCI-X Upstream Split Transaction Control - PX_USTC ** Bit Default Description ** 31:16 003Eh Split Transaction Limit (STL): This register indicates the size of the commitment limit in units of ADQs. ** Software is permitted to program this register to any value greater than or equal to ** the contents of the Split Transaction Capacity register. A value less than the contents ** of the Split Transaction Capacity register causes unspecified results. ** A value of 003Eh or greater enables the bridge to forward all Split Requests of any ** size regardless of the amount of buffer space available. ** 15:00 003Eh Split Transaction Capacity (STC): This read-only field indicates the size of the buffer (number of ADQs) for storing ** split completions. This register controls behavior of the bridge buffers for forwarding ** Split Transactions from a primary bus requester to a secondary bus completer. ** The default value of 003Eh indicates there is available buffer space for 62 ADQs (7936 bytes). **=============================================================================== ** 0xFF-0xFE-0xFD-0xFC: PCI-X Downstream Split Transaction Control - PX_DSTC ** Bit Default Description ** 31:16 003Eh Split Transaction Limit (STL): This register indicates the size of the commitment limit in units of ADQs. ** Software is permitted to program this register to any value greater than or equal to ** the contents of the Split Transaction Capacity register. A value less than the contents ** of the Split Transaction Capacity register causes unspecified results. ** A value of 003Eh or greater enables the bridge to forward all Split Requests of any ** size regardless of the amount of buffer space available. ** 15:00 003Eh Split Transaction Capacity (STC): This read-only field indicates the size of the buffer (number of ADQs) for storing ** split completions. This register controls behavior of the bridge buffers for forwarding ** Split Transactions from a primary bus requester to a secondary bus completer. ** The default value of 003Eh indicates there is available buffer space for 62 ADQs ** (7936 bytes). ************************************************************************** */ /* ************************************************************************************************************************************* ** 80331 Address Translation Unit Register Definitions ** ATU Interface Configuration Header Format ** The ATU is programmed via a [Type 0] configuration command on the PCI interface. ************************************************************************************************************************************* ** | Byte 3 | Byte 2 | Byte 1 | Byte 0 | Configuration Byte Offset **=================================================================================================================================== ** | ATU Device ID | Vendor ID | 00h ** ---------------------------------------------------------------------------------------------------------- ** | Status | Command | 04H ** ---------------------------------------------------------------------------------------------------------- ** | ATU Class Code | Revision ID | 08H ** ---------------------------------------------------------------------------------------------------------- ** | ATUBISTR | Header Type | Latency Timer | Cacheline Size | 0CH ** ---------------------------------------------------------------------------------------------------------- ** | Inbound ATU Base Address 0 | 10H ** ---------------------------------------------------------------------------------------------------------- ** | Inbound ATU Upper Base Address 0 | 14H ** ---------------------------------------------------------------------------------------------------------- ** | Inbound ATU Base Address 1 | 18H ** ---------------------------------------------------------------------------------------------------------- ** | Inbound ATU Upper Base Address 1 | 1CH ** ---------------------------------------------------------------------------------------------------------- ** | Inbound ATU Base Address 2 | 20H ** ---------------------------------------------------------------------------------------------------------- ** | Inbound ATU Upper Base Address 2 | 24H ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | 28H ** ---------------------------------------------------------------------------------------------------------- ** | ATU Subsystem ID | ATU Subsystem Vendor ID | 2CH ** ---------------------------------------------------------------------------------------------------------- ** | Expansion ROM Base Address | 30H ** ---------------------------------------------------------------------------------------------------------- ** | Reserved Capabilities Pointer | 34H ** ---------------------------------------------------------------------------------------------------------- ** | Reserved | 38H ** ---------------------------------------------------------------------------------------------------------- ** | Maximum Latency | Minimum Grant | Interrupt Pin | Interrupt Line | 3CH ** ---------------------------------------------------------------------------------------------------------- ********************************************************************************************************************* */ /* *********************************************************************************** ** ATU Vendor ID Register - ATUVID ** ----------------------------------------------------------------- ** Bit Default Description ** 15:00 8086H (0x17D3) ATU Vendor ID - This is a 16-bit value assigned to Intel. ** This register, combined with the DID, uniquely identify the PCI device. ** Access type is Read/Write to allow the 80331 to configure the register as a different vendor ID ** to simulate the interface of a standard mechanism currently used by existing application software. *********************************************************************************** */ #define ARCMSR_ATU_VENDOR_ID_REG 0x00 /*word*/ /* *********************************************************************************** ** ATU Device ID Register - ATUDID ** ----------------------------------------------------------------- ** Bit Default Description ** 15:00 0336H (0x1110) ATU Device ID - This is a 16-bit value assigned to the ATU. ** This ID, combined with the VID, uniquely identify any PCI device. *********************************************************************************** */ #define ARCMSR_ATU_DEVICE_ID_REG 0x02 /*word*/ /* *********************************************************************************** ** ATU Command Register - ATUCMD ** ----------------------------------------------------------------- ** Bit Default Description ** 15:11 000000 2 Reserved ** 10 0 Interrupt Disable - This bit disables 80331 from asserting the ATU interrupt signal. ** 0=enables the assertion of interrupt signal. ** 1=disables the assertion of its interrupt signal. ** 09 0 2 Fast Back to Back Enable - When cleared, ** the ATU interface is not allowed to generate fast back-to-back cycles on its bus. ** Ignored when operating in the PCI-X mode. ** 08 0 2 SERR# Enable - When cleared, the ATU interface is not allowed to assert SERR# on the PCI interface. ** 07 1 2 Address/Data Stepping Control - Address stepping is implemented for configuration transactions. The ** ATU inserts 2 clock cycles of address stepping for Conventional Mode and 4 clock cycles ** of address stepping for PCI-X mode. ** 06 0 2 Parity Error Response - When set, the ATU takes normal action when a parity error ** is detected. When cleared, parity checking is disabled. ** 05 0 2 VGA Palette Snoop Enable - The ATU interface does not support I/O writes and therefore, ** does not perform VGA palette snooping. ** 04 0 2 Memory Write and Invalidate Enable - When set, ATU may generate MWI commands. ** When clear, ATU use Memory Write commands instead of MWI. Ignored when operating in the PCI-X mode. ** 03 0 2 Special Cycle Enable - The ATU interface does not respond to special cycle commands in any way. ** Not implemented and a reserved bit field. ** 02 0 2 Bus Master Enable - The ATU interface can act as a master on the PCI bus. ** When cleared, disables the device from generating PCI accesses. ** When set, allows the device to behave as a PCI bus master. ** When operating in the PCI-X mode, ATU initiates a split completion transaction regardless ** of the state of this bit. ** 01 0 2 Memory Enable - Controls the ATU interfaceĦĤs response to PCI memory addresses. ** When cleared, the ATU interface does not respond to any memory access on the PCI bus. ** 00 0 2 I/O Space Enable - Controls the ATU interface response to I/O transactions. ** Not implemented and a reserved bit field. *********************************************************************************** */ #define ARCMSR_ATU_COMMAND_REG 0x04 /*word*/ /* *********************************************************************************** ** ATU Status Register - ATUSR (Sheet 1 of 2) ** ----------------------------------------------------------------- ** Bit Default Description ** 15 0 2 Detected Parity Error - set when a parity error is detected in data received by the ATU on the PCI bus even ** when the ATUCMD registerĦĤs Parity Error Response bit is cleared. Set under the following conditions: ** ĦE Write Data Parity Error when the ATU is a target (inbound write). ** ĦE Read Data Parity Error when the ATU is a requester (outbound read). ** ĦE Any Address or Attribute (PCI-X Only) Parity Error on the Bus ** ** ** (including one generated by the ATU). ** 14 0 2 SERR# Asserted - set when SERR# is asserted on the PCI bus by the ATU. ** 13 0 2 Master Abort - set when a transaction initiated by the ATU PCI master interface, ends in a Master-Abort ** or when the ATU receives a Master Abort Split Completion Error Message in PCI-X mode. ** 12 0 2 Target Abort (master) - set when a transaction initiated by the ATU PCI master interface, ends in a target ** abort or when the ATU receives a Target Abort Split Completion Error Message in PCI-X mode. ** 11 0 2 Target Abort (target) - set when the ATU interface, acting as a target, ** terminates the transaction on the PCI bus with a target abort. ** 10:09 01 2 DEVSEL# Timing - These bits are read-only and define the slowest DEVSEL# ** timing for a target device in Conventional PCI Mode regardless of the operating mode ** (except configuration accesses). ** 00 2=Fast ** 01 2=Medium ** 10 2=Slow ** 11 2=Reserved ** The ATU interface uses Medium timing. ** 08 0 2 Master Parity Error - The ATU interface sets this bit under the following conditions: ** ĦE The ATU asserted PERR# itself or the ATU observed PERR# asserted. ** ĦE And the ATU acted as the requester ** for the operation in which the error occurred. ** ĦE And the ATUCMD registerĦĤs Parity Error Response bit is set ** ĦE Or (PCI-X Mode Only) the ATU received a Write Data Parity Error Message ** ĦE And the ATUCMD registerĦĤs Parity Error Response bit is set ** 07 1 2 (Conventional mode) ** 0 2 (PCI-X mode) ** Fast Back-to-Back - The ATU/Messaging Unit interface is capable of accepting fast back-to-back ** transactions in Conventional PCI mode when the transactions are not to the same target. Since fast ** back-to-back transactions do not exist in PCI-X mode, this bit is forced to 0 in the PCI-X mode. ** 06 0 2 UDF Supported - User Definable Features are not supported ** 05 1 2 66 MHz. Capable - 66 MHz operation is supported. ** 04 1 2 Capabilities - When set, this function implements extended capabilities. ** 03 0 Interrupt Status - reflects the state of the ATU interrupt ** when the Interrupt Disable bit in the command register is a 0. ** 0=ATU interrupt signal deasserted. ** 1=ATU interrupt signal asserted. ** NOTE: Setting the Interrupt Disable bit to a 1 has no effect on the state of this bit. Refer to ** Section 3.10.23, Ħ§ATU Interrupt Pin Register - ATUIPRĦ¨ on page 236 for details on the ATU ** interrupt signal. ** 02:00 00000 2 Reserved. *********************************************************************************** */ #define ARCMSR_ATU_STATUS_REG 0x06 /*word*/ /* *********************************************************************************** ** ATU Revision ID Register - ATURID ** ----------------------------------------------------------------- ** Bit Default Description ** 07:00 00H ATU Revision - identifies the 80331 revision number. *********************************************************************************** */ #define ARCMSR_ATU_REVISION_REG 0x08 /*byte*/ /* *********************************************************************************** ** ATU Class Code Register - ATUCCR ** ----------------------------------------------------------------- ** Bit Default Description ** 23:16 05H Base Class - Memory Controller ** 15:08 80H Sub Class - Other Memory Controller ** 07:00 00H Programming Interface - None defined *********************************************************************************** */ #define ARCMSR_ATU_CLASS_CODE_REG 0x09 /*3bytes 0x0B,0x0A,0x09*/ /* *********************************************************************************** ** ATU Cacheline Size Register - ATUCLSR ** ----------------------------------------------------------------- ** Bit Default Description ** 07:00 00H ATU Cacheline Size - specifies the system cacheline size in DWORDs. Cacheline size is restricted to either 0, 8 or 16 DWORDs. *********************************************************************************** */ #define ARCMSR_ATU_CACHELINE_SIZE_REG 0x0C /*byte*/ /* *********************************************************************************** ** ATU Latency Timer Register - ATULT ** ----------------------------------------------------------------- ** Bit Default Description ** 07:03 00000 2 (for Conventional mode) ** 01000 2 (for PCI-X mode) ** Programmable Latency Timer - This field varies the latency timer for the interface from 0 to 248 clocks. ** The default value is 0 clocks for Conventional PCI mode, and 64 clocks for PCI-X mode. ** 02:00 000 2 Latency Timer Granularity - These Bits are read only giving a programmable granularity of 8 clocks for the latency timer. *********************************************************************************** */ #define ARCMSR_ATU_LATENCY_TIMER_REG 0x0D /*byte*/ /* *********************************************************************************** ** ATU Header Type Register - ATUHTR ** ----------------------------------------------------------------- ** Bit Default Description ** 07 0 2 Single Function/Multi-Function Device - Identifies the 80331 as a single-function PCI device. ** 06:00 000000 2 PCI Header Type - This bit field indicates the type of PCI header implemented. The ATU interface ** header conforms to PCI Local Bus Specification, Revision 2.3. *********************************************************************************** */ #define ARCMSR_ATU_HEADER_TYPE_REG 0x0E /*byte*/ /* *********************************************************************************** ** ATU BIST Register - ATUBISTR ** ** The ATU BIST Register controls the functions the Intel XScale core performs when BIST is ** initiated. This register is the interface between the host processor requesting BIST functions and ** the 80331 replying with the results from the software implementation of the BIST functionality. ** ----------------------------------------------------------------- ** Bit Default Description ** 07 0 2 BIST Capable - This bit value is always equal to the ATUCR ATU BIST Interrupt Enable bit. ** 06 0 2 Start BIST - When the ATUCR BIST Interrupt Enable bit is set: ** Setting this bit generates an interrupt to the Intel XScale core to perform a software BIST function. ** The Intel XScale core clears this bit when the BIST software has completed with the BIST results ** found in ATUBISTR register bits [3:0]. ** When the ATUCR BIST Interrupt Enable bit is clear: ** Setting this bit does not generate an interrupt to the Intel XScale core and no BIST functions is performed. ** The Intel XScale core does not clear this bit. ** 05:04 00 2 Reserved ** 03:00 0000 2 BIST Completion Code - when the ATUCR BIST Interrupt Enable bit is set and the ATUBISTR Start BIST bit is set (bit 6): ** The Intel XScale core places the results of the software BIST in these bits. ** A nonzero value indicates a device-specific error. *********************************************************************************** */ #define ARCMSR_ATU_BIST_REG 0x0F /*byte*/ /* *************************************************************************************** ** ATU Base Registers and Associated Limit Registers *************************************************************************************** ** Base Address Register Limit Register Description ** Inbound ATU Base Address Register 0 Inbound ATU Limit Register 0 Defines the inbound translation window 0 from the PCI bus. ** Inbound ATU Upper Base Address Register 0 N/A Together with ATU Base Address Register 0 defines the inbound ** translation window 0 from the PCI bus for DACs. ** Inbound ATU Base Address Register 1 Inbound ATU Limit Register 1 Defines inbound window 1 from the PCI bus. ** Inbound ATU Upper Base Address Register 1 N/A Together with ATU Base Address Register 1 defines inbound window ** 1 from the PCI bus for DACs. ** Inbound ATU Base Address Register 2 Inbound ATU Limit Register 2 Defines the inbound translation window 2 from the PCI bus. ** Inbound ATU Upper Base Address Register 2 N/A Together with ATU Base Address Register 2 defines the inbound ** ** translation window 2 from the PCI bus for DACs. ** Inbound ATU Base Address Register 3 Inbound ATU Limit Register 3 Defines the inbound translation window 3 from the PCI bus. ** Inbound ATU Upper Base Address Register 3 N/A Together with ATU Base Address Register 3 defines the inbound ** ** translation window 3 from the PCI bus for DACs. ** NOTE: This is a private BAR that resides outside of the standard PCI configuration header space (offsets 00H-3FH). ** Expansion ROM Base Address Register Expansion ROM Limit Register Defines the window of addresses used by a bus master for reading ** from an Expansion ROM. **-------------------------------------------------------------------------------------- ** ATU Inbound Window 1 is not a translate window. ** The ATU does not claim any PCI accesses that fall within this range. ** This window is used to allocate host memory for use by Private Devices. ** When enabled, the ATU interrupts the Intel XScale core when either the IABAR1 register or the IAUBAR1 register is written from the PCI bus. *********************************************************************************** */ /* *********************************************************************************** ** Inbound ATU Base Address Register 0 - IABAR0 ** ** . The Inbound ATU Base Address Register 0 (IABAR0) together with the Inbound ATU Upper Base Address Register 0 (IAUBAR0) ** defines the block of memory addresses where the inbound translation window 0 begins. ** . The inbound ATU decodes and forwards the bus request to the 80331 internal bus with a translated address to map into 80331 local memory. ** . The IABAR0 and IAUBAR0 define the base address and describes the required memory block size. ** . Bits 31 through 12 of the IABAR0 is either read/write bits or read only with a value of 0 ** depending on the value located within the IALR0. ** This configuration allows the IABAR0 to be programmed per PCI Local Bus Specification. ** The first 4 Kbytes of memory defined by the IABAR0, IAUBAR0 and the IALR0 is reserved for the Messaging Unit. ** The programmed value within the base address register must comply with the PCI programming requirements for address alignment. ** Warning: ** When IALR0 is cleared prior to host configuration: ** the user should also clear the Prefetchable Indicator and the Type Indicator. ** Assuming IALR0 is not cleared: ** a. Since non prefetchable memory windows can never be placed above the 4 Gbyte address boundary, ** when the Prefetchable Indicator is cleared prior to host configuration, ** the user should also set the Type Indicator for 32 bit addressability. ** b. For compliance to the PCI-X Addendum to the PCI Local Bus Specification, ** when the Prefetchable Indicator is set prior to host configuration, the user ** should also set the Type Indicator for 64 bit addressability. ** This is the default for IABAR0. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 00000H Translation Base Address 0 - These bits define the actual location ** the translation function is to respond to when addressed from the PCI bus. ** 11:04 00H Reserved. ** 03 1 2 Prefetchable Indicator - When set, defines the memory space as prefetchable. ** 02:01 10 2 Type Indicator - Defines the width of the addressability for this memory window: ** 00 - Memory Window is locatable anywhere in 32 bit address space ** 10 - Memory Window is locatable anywhere in 64 bit address space ** 00 0 2 Memory Space Indicator - This bit field describes memory or I/O space base address. ** The ATU does not occupy I/O space, ** thus this bit must be zero. *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_BASE_ADDRESS0_REG 0x10 /*dword 0x13,0x12,0x11,0x10*/ #define ARCMSR_INBOUND_ATU_MEMORY_PREFETCHABLE 0x08 #define ARCMSR_INBOUND_ATU_MEMORY_WINDOW64 0x04 /* *********************************************************************************** ** Inbound ATU Upper Base Address Register 0 - IAUBAR0 ** ** This register contains the upper base address when decoding PCI addresses beyond 4 GBytes. ** Together with the Translation Base Address this register defines the actual location the translation ** function is to respond to when addressed from the PCI bus for addresses > 4GBytes (for DACs). ** The programmed value within the base address register must comply with the PCI programming requirements for address alignment. ** Note: ** When the Type indicator of IABAR0 is set to indicate 32 bit addressability, ** the IAUBAR0 register attributes are read-only. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:0 00000H Translation Upper Base Address 0 - Together with the Translation Base Address 0 these bits define the ** actual location the translation function is to respond to when addressed from the PCI bus for addresses > 4GBytes. *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_UPPER_BASE_ADDRESS0_REG 0x14 /*dword 0x17,0x16,0x15,0x14*/ /* *********************************************************************************** ** Inbound ATU Base Address Register 1 - IABAR1 ** ** . The Inbound ATU Base Address Register (IABAR1) together with the Inbound ATU Upper Base Address Register 1 (IAUBAR1) ** defines the block of memory addresses where the inbound translation window 1 begins. ** . This window is used merely to allocate memory on the PCI bus and, the ATU does not process any PCI bus transactions to this memory range. ** . The programmed value within the base address register must comply with the PCI programming requirements for address alignment. ** . When enabled, the ATU interrupts the Intel XScale core when the IABAR1 register is written from the PCI bus. ** Warning: ** When a non-zero value is not written to IALR1 prior to host configuration, ** the user should not set either the Prefetchable Indicator or the Type Indicator for 64 bit addressability. ** This is the default for IABAR1. ** Assuming a non-zero value is written to IALR1, ** the user may set the Prefetchable Indicator ** or the Type Indicator: ** a. Since non prefetchable memory windows can never be placed above the 4 Gbyte address ** boundary, when the Prefetchable Indicator is not set prior to host configuration, ** the user should also leave the Type Indicator set for 32 bit addressability. ** This is the default for IABAR1. ** b. when the Prefetchable Indicator is set prior to host configuration, ** the user should also set the Type Indicator for 64 bit addressability. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 00000H Translation Base Address 1 - These bits define the actual location of window 1 on the PCI bus. ** 11:04 00H Reserved. ** 03 0 2 Prefetchable Indicator - When set, defines the memory space as prefetchable. ** 02:01 00 2 Type Indicator - Defines the width of the addressability for this memory window: ** 00 - Memory Window is locatable anywhere in 32 bit address space ** 10 - Memory Window is locatable anywhere in 64 bit address space ** 00 0 2 Memory Space Indicator - This bit field describes memory or I/O space base address. ** The ATU does not occupy I/O space, ** thus this bit must be zero. *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_BASE_ADDRESS1_REG 0x18 /*dword 0x1B,0x1A,0x19,0x18*/ /* *********************************************************************************** ** Inbound ATU Upper Base Address Register 1 - IAUBAR1 ** ** This register contains the upper base address when locating this window for PCI addresses beyond 4 GBytes. ** Together with the IABAR1 this register defines the actual location for this memory window for addresses > 4GBytes (for DACs). ** This window is used merely to allocate memory on the PCI bus and, the ATU does not process any PCI bus transactions to this memory range. ** The programmed value within the base address register must comply with the PCI programming ** requirements for address alignment. ** When enabled, the ATU interrupts the Intel XScale core when the IAUBAR1 register is written ** from the PCI bus. ** Note: ** When the Type indicator of IABAR1 is set to indicate 32 bit addressability, ** the IAUBAR1 register attributes are read-only. ** This is the default for IABAR1. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:0 00000H Translation Upper Base Address 1 - Together with the Translation Base Address 1 ** these bits define the actual location for this memory window on the PCI bus for addresses > 4GBytes. *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_UPPER_BASE_ADDRESS1_REG 0x1C /*dword 0x1F,0x1E,0x1D,0x1C*/ /* *********************************************************************************** ** Inbound ATU Base Address Register 2 - IABAR2 ** ** . The Inbound ATU Base Address Register 2 (IABAR2) together with the Inbound ATU Upper Base Address Register 2 (IAUBAR2) ** defines the block of memory addresses where the inbound translation window 2 begins. ** . The inbound ATU decodes and forwards the bus request to the 80331 internal bus with a translated address to map into 80331 local memory. ** . The IABAR2 and IAUBAR2 define the base address and describes the required memory block size ** . Bits 31 through 12 of the IABAR2 is either read/write bits or read only with a value of 0 depending on the value located within the IALR2. ** The programmed value within the base address register must comply with the PCI programming requirements for address alignment. ** Warning: ** When a non-zero value is not written to IALR2 prior to host configuration, ** the user should not set either the Prefetchable Indicator ** or the Type Indicator for 64 bit addressability. ** This is the default for IABAR2. ** Assuming a non-zero value is written to IALR2, ** the user may set the Prefetchable Indicator ** or the Type Indicator: ** a. Since non prefetchable memory windows can never be placed above the 4 Gbyte address boundary, ** when the Prefetchable Indicator is not set prior to host configuration, ** the user should also leave the Type Indicator set for 32 bit addressability. ** This is the default for IABAR2. ** b. when the Prefetchable Indicator is set prior to host configuration, ** the user should also set the Type Indicator for 64 bit addressability. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 00000H Translation Base Address 2 - These bits define the actual location ** the translation function is to respond to when addressed from the PCI bus. ** 11:04 00H Reserved. ** 03 0 2 Prefetchable Indicator - When set, defines the memory space as prefetchable. ** 02:01 00 2 Type Indicator - Defines the width of the addressability for this memory window: ** 00 - Memory Window is locatable anywhere in 32 bit address space ** 10 - Memory Window is locatable anywhere in 64 bit address space ** 00 0 2 Memory Space Indicator - This bit field describes memory or I/O space base address. ** The ATU does not occupy I/O space, ** thus this bit must be zero. *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_BASE_ADDRESS2_REG 0x20 /*dword 0x23,0x22,0x21,0x20*/ /* *********************************************************************************** ** Inbound ATU Upper Base Address Register 2 - IAUBAR2 ** ** This register contains the upper base address when decoding PCI addresses beyond 4 GBytes. ** Together with the Translation Base Address this register defines the actual location ** the translation function is to respond to when addressed from the PCI bus for addresses > 4GBytes (for DACs). ** The programmed value within the base address register must comply with the PCI programming ** requirements for address alignment. ** Note: ** When the Type indicator of IABAR2 is set to indicate 32 bit addressability, ** the IAUBAR2 register attributes are read-only. ** This is the default for IABAR2. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:0 00000H Translation Upper Base Address 2 - Together with the Translation Base Address 2 ** these bits define the actual location the translation function is to respond to ** when addressed from the PCI bus for addresses > 4GBytes. *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_UPPER_BASE_ADDRESS2_REG 0x24 /*dword 0x27,0x26,0x25,0x24*/ /* *********************************************************************************** ** ATU Subsystem Vendor ID Register - ASVIR ** ----------------------------------------------------------------- ** Bit Default Description ** 15:0 0000H Subsystem Vendor ID - This register uniquely identifies the add-in board or subsystem vendor. *********************************************************************************** */ #define ARCMSR_ATU_SUBSYSTEM_VENDOR_ID_REG 0x2C /*word 0x2D,0x2C*/ /* *********************************************************************************** ** ATU Subsystem ID Register - ASIR ** ----------------------------------------------------------------- ** Bit Default Description ** 15:0 0000H Subsystem ID - uniquely identifies the add-in board or subsystem. *********************************************************************************** */ #define ARCMSR_ATU_SUBSYSTEM_ID_REG 0x2E /*word 0x2F,0x2E*/ /* *********************************************************************************** ** Expansion ROM Base Address Register -ERBAR ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 00000H Expansion ROM Base Address - These bits define the actual location ** where the Expansion ROM address window resides when addressed from the PCI bus on any 4 Kbyte boundary. ** 11:01 000H Reserved ** 00 0 2 Address Decode Enable - This bit field shows the ROM address ** decoder is enabled or disabled. When cleared, indicates the address decoder is disabled. *********************************************************************************** */ #define ARCMSR_EXPANSION_ROM_BASE_ADDRESS_REG 0x30 /*dword 0x33,0x32,0v31,0x30*/ #define ARCMSR_EXPANSION_ROM_ADDRESS_DECODE_ENABLE 0x01 /* *********************************************************************************** ** ATU Capabilities Pointer Register - ATU_CAP_PTR ** ----------------------------------------------------------------- ** Bit Default Description ** 07:00 C0H Capability List Pointer - This provides an offset in this functionĦĤs configuration space ** that points to the 80331 PCl Bus Power Management extended capability. *********************************************************************************** */ #define ARCMSR_ATU_CAPABILITY_PTR_REG 0x34 /*byte*/ /* *********************************************************************************** ** Determining Block Sizes for Base Address Registers ** The required address size and type can be determined by writing ones to a base address register and ** reading from the registers. By scanning the returned value from the least-significant bit of the base ** address registers upwards, the programmer can determine the required address space size. The ** binary-weighted value of the first non-zero bit found indicates the required amount of space. ** Table 105 describes the relationship between the values read back and the byte sizes the base ** address register requires. ** As an example, assume that FFFF.FFFFH is written to the ATU Inbound Base Address Register 0 ** (IABAR0) and the value read back is FFF0.0008H. Bit zero is a zero, so the device requires ** memory address space. Bit three is one, so the memory does supports prefetching. Scanning ** upwards starting at bit four, bit twenty is the first one bit found. The binary-weighted value of this ** bit is 1,048,576, indicated that the device requires 1 Mbyte of memory space. ** The ATU Base Address Registers and the Expansion ROM Base Address Register use their ** associated limit registers to enable which bits within the base address register are read/write and ** which bits are read only (0). This allows the programming of these registers in a manner similar to ** other PCI devices even though the limit is variable. ** Table 105. Memory Block Size Read Response ** Response After Writing all 1s ** to the Base Address Register ** Size ** (Bytes) ** Response After Writing all 1s ** to the Base Address Register ** Size ** (Bytes) ** FFFFFFF0H 16 FFF00000H 1 M ** FFFFFFE0H 32 FFE00000H 2 M ** FFFFFFC0H 64 FFC00000H 4 M ** FFFFFF80H 128 FF800000H 8 M ** FFFFFF00H 256 FF000000H 16 M ** FFFFFE00H 512 FE000000H 32 M ** FFFFFC00H 1K FC000000H 64 M ** FFFFF800H 2K F8000000H 128 M ** FFFFF000H 4K F0000000H 256 M ** FFFFE000H 8K E0000000H 512 M ** FFFFC000H 16K C0000000H 1 G ** FFFF8000H 32K 80000000H 2 G ** FFFF0000H 64K ** 00000000H ** Register not ** imple-mented, ** no ** address ** space ** required. ** FFFE0000H 128K ** FFFC0000H 256K ** FFF80000H 512K ** *************************************************************************************** */ /* *********************************************************************************** ** ATU Interrupt Line Register - ATUILR ** ----------------------------------------------------------------- ** Bit Default Description ** 07:00 FFH Interrupt Assigned - system-assigned value identifies which system interrupt controllerĦĤs interrupt ** request line connects to the device's PCI interrupt request lines ** (as specified in the interrupt pin register). ** A value of FFH signifies Ħ§no connectionĦ¨ or Ħ§unknownĦ¨. *********************************************************************************** */ #define ARCMSR_ATU_INTERRUPT_LINE_REG 0x3C /*byte*/ /* *********************************************************************************** ** ATU Interrupt Pin Register - ATUIPR ** ----------------------------------------------------------------- ** Bit Default Description ** 07:00 01H Interrupt Used - A value of 01H signifies that the ATU interface unit uses INTA# as the interrupt pin. *********************************************************************************** */ #define ARCMSR_ATU_INTERRUPT_PIN_REG 0x3D /*byte*/ /* *********************************************************************************** ** ATU Minimum Grant Register - ATUMGNT ** ----------------------------------------------------------------- ** Bit Default Description ** 07:00 80H This register specifies how long a burst period the device needs in increments of 8 PCI clocks. *********************************************************************************** */ #define ARCMSR_ATU_MINIMUM_GRANT_REG 0x3E /*byte*/ /* *********************************************************************************** ** ATU Maximum Latency Register - ATUMLAT ** ----------------------------------------------------------------- ** Bit Default Description ** 07:00 00H Specifies frequency (how often) the device needs to access the PCI bus ** in increments of 8 PCI clocks. A zero value indicates the device has no stringent requirement. *********************************************************************************** */ #define ARCMSR_ATU_MAXIMUM_LATENCY_REG 0x3F /*byte*/ /* *********************************************************************************** ** Inbound Address Translation ** ** The ATU allows external PCI bus initiators to directly access the internal bus. ** These PCI bus initiators can read or write 80331 memory-mapped registers or 80331 local memory space. ** The process of inbound address translation involves two steps: ** 1. Address Detection. ** ĦE Determine when the 32-bit PCI address (64-bit PCI address during DACs) is ** within the address windows defined for the inbound ATU. ** ĦE Claim the PCI transaction with medium DEVSEL# timing in the conventional PCI ** mode and with Decode A DEVSEL# timing in the PCI-X mode. ** 2. Address Translation. ** ĦE Translate the 32-bit PCI address (lower 32-bit PCI address during DACs) to a 32-bit 80331 internal bus address. ** The ATU uses the following registers in inbound address window 0 translation: ** ĦE Inbound ATU Base Address Register 0 ** ĦE Inbound ATU Limit Register 0 ** ĦE Inbound ATU Translate Value Register 0 ** The ATU uses the following registers in inbound address window 2 translation: ** ĦE Inbound ATU Base Address Register 2 ** ĦE Inbound ATU Limit Register 2 ** ĦE Inbound ATU Translate Value Register 2 ** The ATU uses the following registers in inbound address window 3 translation: ** ĦE Inbound ATU Base Address Register 3 ** ĦE Inbound ATU Limit Register 3 ** ĦE Inbound ATU Translate Value Register 3 ** Note: Inbound Address window 1 is not a translate window. ** Instead, window 1 may be used to allocate host memory for Private Devices. ** Inbound Address window 3 does not reside in the standard section of the configuration header (offsets 00H - 3CH), ** thus the host BIOS does not configure window 3. ** Window 3 is intended to be used as a special window into local memory for private PCI ** agents controlled by the 80331 in conjunction with the Private Memory Space of the bridge. ** PCI-to-PCI Bridge in 80331 or ** Inbound address detection is determined from the 32-bit PCI address, ** (64-bit PCI address during DACs) the base address register and the limit register. ** In the case of DACs none of the upper 32-bits of the address is masked during address comparison. ** ** The algorithm for detection is: ** ** Equation 1. Inbound Address Detection ** When (PCI_Address [31:0] & Limit_Register[31:0]) == (Base_Register[31:0] & PCI_Address [63:32]) == Base_Register[63:32] (for DACs only) ** the PCI Address is claimed by the Inbound ATU. ** ** The incoming 32-bit PCI address (lower 32-bits of the address in case of DACs) is bitwise ANDed ** with the associated inbound limit register. ** When the result matches the base register (and upper base address matches upper PCI address in case of DACs), ** the inbound PCI address is detected as being within the inbound translation window and is claimed by the ATU. ** ** Note: The first 4 Kbytes of the ATU inbound address translation window 0 are reserved for the Messaging Unit. ** Once the transaction is claimed, the address must be translated from a PCI address to a 32-bit ** internal bus address. In case of DACs upper 32-bits of the address is simply discarded and only the ** lower 32-bits are used during address translation. ** The algorithm is: ** ** ** Equation 2. Inbound Translation ** Intel I/O processor Internal Bus Address=(PCI_Address[31:0] & ~Limit_Register[31:0]) | ATU_Translate_Value_Register[31:0]. ** ** The incoming 32-bit PCI address (lower 32-bits in case of DACs) is first bitwise ANDed with the ** bitwise inverse of the limit register. This result is bitwise ORed with the ATU Translate Value and ** the result is the internal bus address. This translation mechanism is used for all inbound memory ** read and write commands excluding inbound configuration read and writes. ** In the PCI mode for inbound memory transactions, the only burst order supported is Linear ** Incrementing. For any other burst order, the ATU signals a Disconnect after the first data phase. ** The PCI-X supports linear incrementing only, and hence above situation is not encountered in the PCI-X mode. ** example: ** Register Values ** Base_Register=3A00 0000H ** Limit_Register=FF80 0000H (8 Mbyte limit value) ** Value_Register=B100 0000H ** Inbound Translation Window ranges from 3A00 0000H to 3A7F FFFFH (8 Mbytes) ** ** Address Detection (32-bit address) ** ** PCI_Address & Limit_Register == Base_Register ** 3A45 012CH & FF80 0000H == 3A00 0000H ** ** ANS: PCI_Address is in the Inbound Translation Window ** Address Translation (to get internal bus address) ** ** IB_Address=(PCI_Address & ~Limit_Register) | Value_Reg ** IB_Address=(3A45 012CH & 007F FFFFH) | B100 0000H ** ** ANS:IB_Address=B145 012CH *********************************************************************************** */ /* *********************************************************************************** ** Inbound ATU Limit Register 0 - IALR0 ** ** Inbound address translation for memory window 0 occurs for data transfers occurring from the PCI ** bus (originated from the PCI bus) to the 80331 internal bus. The address translation block converts ** PCI addresses to internal bus addresses. ** The 80331 translate value registerĦĤs programmed value must be naturally aligned with the base ** address registerĦĤs programmed value. The limit register is used as a mask; thus, the lower address ** bits programmed into the 80331 translate value register are invalid. Refer to the PCI Local Bus ** Specification, Revision 2.3 for additional information on programming base address registers. ** Bits 31 to 12 within the IALR0 have a direct effect on the IABAR0 register, bits 31 to 12, with a ** one to one correspondence. A value of 0 in a bit within the IALR0 makes the corresponding bit ** within the IABAR0 a read only bit which always returns 0. A value of 1 in a bit within the IALR0 ** makes the corresponding bit within the IABAR0 read/write from PCI. Note that a consequence of ** this programming scheme is that unless a valid value exists within the IALR0, all writes to the ** IABAR0 has no effect since a value of all zeros within the IALR0 makes the IABAR0 a read only register. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 FF000H Inbound Translation Limit 0 - This readback value determines the memory block size required for ** inbound memory window 0 of the address translation unit. This defaults to an inbound window of 16MB. ** 11:00 000H Reserved *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_LIMIT0_REG 0x40 /*dword 0x43,0x42,0x41,0x40*/ /* *********************************************************************************** ** Inbound ATU Translate Value Register 0 - IATVR0 ** ** The Inbound ATU Translate Value Register 0 (IATVR0) contains the internal bus address used to ** convert PCI bus addresses. The converted address is driven on the internal bus as a result of the ** inbound ATU address translation. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 FF000H Inbound ATU Translation Value 0 - This value is used to convert the PCI address to internal bus addresses. ** This value must be 64-bit aligned on the internal bus. ** The default address allows the ATU to access the internal 80331 memory-mapped registers. ** 11:00 000H Reserved *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_TRANSLATE_VALUE0_REG 0x44 /*dword 0x47,0x46,0x45,0x44*/ /* *********************************************************************************** ** Expansion ROM Limit Register - ERLR ** ** The Expansion ROM Limit Register (ERLR) defines the block size of addresses the ATU defines ** as Expansion ROM address space. The block size is programmed by writing a value into the ERLR. ** Bits 31 to 12 within the ERLR have a direct effect on the ERBAR register, bits 31 to 12, with a one ** to one correspondence. A value of 0 in a bit within the ERLR makes the corresponding bit within ** the ERBAR a read only bit which always returns 0. A value of 1 in a bit within the ERLR makes ** the corresponding bit within the ERBAR read/write from PCI. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 000000H Expansion ROM Limit - Block size of memory required for the Expansion ROM translation unit. Default ** value is 0, which indicates no Expansion ROM address space and all bits within the ERBAR are read only with a value of 0. ** 11:00 000H Reserved. *********************************************************************************** */ #define ARCMSR_EXPANSION_ROM_LIMIT_REG 0x48 /*dword 0x4B,0x4A,0x49,0x48*/ /* *********************************************************************************** ** Expansion ROM Translate Value Register - ERTVR ** ** The Expansion ROM Translate Value Register contains the 80331 internal bus address which the ** ATU converts the PCI bus access. This address is driven on the internal bus as a result of the ** Expansion ROM address translation. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 00000H Expansion ROM Translation Value - Used to convert PCI addresses to 80331 internal bus addresses ** for Expansion ROM accesses. The Expansion ROM address translation value must be word aligned on the internal bus. ** 11:00 000H Reserved *********************************************************************************** */ #define ARCMSR_EXPANSION_ROM_TRANSLATE_VALUE_REG 0x4C /*dword 0x4F,0x4E,0x4D,0x4C*/ /* *********************************************************************************** ** Inbound ATU Limit Register 1 - IALR1 ** ** Bits 31 to 12 within the IALR1 have a direct effect on the IABAR1 register, bits 31 to 12, with a ** one to one correspondence. A value of 0 in a bit within the IALR1 makes the corresponding bit ** within the IABAR1 a read only bit which always returns 0. A value of 1 in a bit within the IALR1 ** makes the corresponding bit within the IABAR1 read/write from PCI. Note that a consequence of ** this programming scheme is that unless a valid value exists within the IALR1, all writes to the ** IABAR1 has no effect since a value of all zeros within the IALR1 makes the IABAR1 a read only ** register. ** The inbound memory window 1 is used merely to allocate memory on the PCI bus. The ATU does ** not process any PCI bus transactions to this memory range. ** Warning: The ATU does not claim any PCI accesses that fall within the range defined by IABAR1, ** IAUBAR1, and IALR1. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 00000H Inbound Translation Limit 1 - This readback value determines the memory block size ** required for the ATUs memory window 1. ** 11:00 000H Reserved *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_LIMIT1_REG 0x50 /*dword 0x53,0x52,0x51,0x50*/ /* *********************************************************************************** ** Inbound ATU Limit Register 2 - IALR2 ** ** Inbound address translation for memory window 2 occurs for data transfers occurring from the PCI ** bus (originated from the PCI bus) to the 80331 internal bus. The address translation block converts ** PCI addresses to internal bus addresses. ** The inbound translation base address for inbound window 2 is specified in Section 3.10.15. When ** determining block size requirements ĦX as described in Section 3.10.21 ĦX the translation limit ** register provides the block size requirements for the base address register. The remaining registers ** used for performing address translation are discussed in Section 3.2.1.1. ** The 80331 translate value registerĦĤs programmed value must be naturally aligned with the base ** address registerĦĤs programmed value. The limit register is used as a mask; thus, the lower address ** bits programmed into the 80331 translate value register are invalid. Refer to the PCI Local Bus ** Specification, Revision 2.3 for additional information on programming base address registers. ** Bits 31 to 12 within the IALR2 have a direct effect on the IABAR2 register, bits 31 to 12, with a ** one to one correspondence. A value of 0 in a bit within the IALR2 makes the corresponding bit ** within the IABAR2 a read only bit which always returns 0. A value of 1 in a bit within the IALR2 ** makes the corresponding bit within the IABAR2 read/write from PCI. Note that a consequence of ** this programming scheme is that unless a valid value exists within the IALR2, all writes to the ** IABAR2 has no effect since a value of all zeros within the IALR2 makes the IABAR2 a read only ** register. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 00000H Inbound Translation Limit 2 - This readback value determines the memory block size ** required for the ATUs memory window 2. ** 11:00 000H Reserved *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_LIMIT2_REG 0x54 /*dword 0x57,0x56,0x55,0x54*/ /* *********************************************************************************** ** Inbound ATU Translate Value Register 2 - IATVR2 ** ** The Inbound ATU Translate Value Register 2 (IATVR2) contains the internal bus address used to ** convert PCI bus addresses. The converted address is driven on the internal bus as a result of the ** inbound ATU address translation. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 00000H Inbound ATU Translation Value 2 - This value is used to convert the PCI address to internal bus addresses. ** This value must be 64-bit aligned on the internal bus. ** The default address allows the ATU to access the internal 80331 ** ** memory-mapped registers. ** 11:00 000H Reserved *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_TRANSLATE_VALUE2_REG 0x58 /*dword 0x5B,0x5A,0x59,0x58*/ /* *********************************************************************************** ** Outbound I/O Window Translate Value Register - OIOWTVR ** ** The Outbound I/O Window Translate Value Register (OIOWTVR) contains the PCI I/O address ** used to convert the internal bus access to a PCI address. This address is driven on the PCI bus as a ** result of the outbound ATU address translation. ** The I/O window is from 80331 internal bus address 9000 000H to 9000 FFFFH with the fixed ** length of 64 Kbytes. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:16 0000H Outbound I/O Window Translate Value - Used to convert internal bus addresses to PCI addresses. ** 15:00 0000H Reserved *********************************************************************************** */ #define ARCMSR_OUTBOUND_IO_WINDOW_TRANSLATE_VALUE_REG 0x5C /*dword 0x5F,0x5E,0x5D,0x5C*/ /* *********************************************************************************** ** Outbound Memory Window Translate Value Register 0 -OMWTVR0 ** ** The Outbound Memory Window Translate Value Register 0 (OMWTVR0) contains the PCI ** address used to convert 80331 internal bus addresses for outbound transactions. This address is ** driven on the PCI bus as a result of the outbound ATU address translation. ** The memory window is from internal bus address 8000 000H to 83FF FFFFH with the fixed length ** of 64 Mbytes. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:26 00H Outbound MW Translate Value - Used to convert 80331 internal bus addresses to PCI addresses. ** 25:02 00 0000H Reserved ** 01:00 00 2 Burst Order - This bit field shows the address sequence during a memory burst. ** Only linear incrementing mode is supported. *********************************************************************************** */ #define ARCMSR_OUTBOUND_MEMORY_WINDOW_TRANSLATE_VALUE0_REG 0x60 /*dword 0x63,0x62,0x61,0x60*/ /* *********************************************************************************** ** Outbound Upper 32-bit Memory Window Translate Value Register 0 - OUMWTVR0 ** ** The Outbound Upper 32-bit Memory Window Translate Value Register 0 (OUMWTVR0) defines ** the upper 32-bits of address used during a dual address cycle. This enables the outbound ATU to ** directly address anywhere within the 64-bit host address space. When this register is all-zero, then ** a SAC is generated on the PCI bus. ** The memory window is from internal bus address 8000 000H to 83FF FFFFH with the fixed ** length of 64 Mbytes. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:00 0000 0000H These bits define the upper 32-bits of address driven during the dual address cycle (DAC). *********************************************************************************** */ #define ARCMSR_OUTBOUND_UPPER32_MEMORY_WINDOW_TRANSLATE_VALUE0_REG 0x64 /*dword 0x67,0x66,0x65,0x64*/ /* *********************************************************************************** ** Outbound Memory Window Translate Value Register 1 -OMWTVR1 ** ** The Outbound Memory Window Translate Value Register 1 (OMWTVR1) contains the PCI ** address used to convert 80331 internal bus addresses for outbound transactions. This address is ** driven on the PCI bus as a result of the outbound ATU address translation. ** The memory window is from internal bus address 8400 000H to 87FF FFFFH with the fixed length ** of 64 Mbytes. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:26 00H Outbound MW Translate Value - Used to convert 80331 internal bus addresses to PCI addresses. ** 25:02 00 0000H Reserved ** 01:00 00 2 Burst Order - This bit field shows the address sequence during a memory burst. ** Only linear incrementing mode is supported. *********************************************************************************** */ #define ARCMSR_OUTBOUND_MEMORY_WINDOW_TRANSLATE_VALUE1_REG 0x68 /*dword 0x6B,0x6A,0x69,0x68*/ /* *********************************************************************************** ** Outbound Upper 32-bit Memory Window Translate Value Register 1 - OUMWTVR1 ** ** The Outbound Upper 32-bit Memory Window Translate Value Register 1 (OUMWTVR1) defines ** the upper 32-bits of address used during a dual address cycle. This enables the outbound ATU to ** directly address anywhere within the 64-bit host address space. When this register is all-zero, then ** a SAC is generated on the PCI bus. ** The memory window is from internal bus address 8400 000H to 87FF FFFFH with the fixed length ** of 64 Mbytes. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:00 0000 0000H These bits define the upper 32-bits of address driven during the dual address cycle (DAC). *********************************************************************************** */ #define ARCMSR_OUTBOUND_UPPER32_MEMORY_WINDOW_TRANSLATE_VALUE1_REG 0x6C /*dword 0x6F,0x6E,0x6D,0x6C*/ /* *********************************************************************************** ** Outbound Upper 32-bit Direct Window Translate Value Register - OUDWTVR ** ** The Outbound Upper 32-bit Direct Window Translate Value Register (OUDWTVR) defines the ** upper 32-bits of address used during a dual address cycle for the transactions via Direct Addressing ** Window. This enables the outbound ATU to directly address anywhere within the 64-bit host ** address space. When this register is all-zero, then a SAC is generated on the PCI bus. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:00 0000 0000H These bits define the upper 32-bits of address driven during the dual address cycle (DAC). *********************************************************************************** */ #define ARCMSR_OUTBOUND_UPPER32_DIRECT_WINDOW_TRANSLATE_VALUE_REG 0x78 /*dword 0x7B,0x7A,0x79,0x78*/ /* *********************************************************************************** ** ATU Configuration Register - ATUCR ** ** The ATU Configuration Register controls the outbound address translation for address translation ** unit. It also contains bits for Conventional PCI Delayed Read Command (DRC) aliasing, discard ** timer status, SERR# manual assertion, SERR# detection interrupt masking, and ATU BIST ** interrupt enabling. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:20 00H Reserved ** 19 0 2 ATU DRC Alias - when set, the ATU does not distinguish read commands when attempting to match a ** current PCI read transaction with read data enqueued within the DRC buffer. When clear, a current read ** transaction must have the exact same read command as the DRR for the ATU to deliver DRC data. Not ** applicable in the PCI-X mode. ** 18 0 2 Direct Addressing Upper 2Gbytes Translation Enable - When set, ** with Direct Addressing enabled (bit 7 of the ATUCR set), ** the ATU forwards internal bus cycles with an address between 0000.0040H and ** 7FFF.FFFFH to the PCI bus with bit 31 of the address set (8000.0000H - FFFF.FFFFH). ** When clear, no translation occurs. ** 17 0 2 Reserved ** 16 0 2 SERR# Manual Assertion - when set, the ATU asserts SERR# for one clock on the PCI interface. Until ** cleared, SERR# may not be manually asserted again. Once cleared, operation proceeds as specified. ** 15 0 2 ATU Discard Timer Status - when set, one of the 4 discard timers within the ATU has expired and ** discarded the delayed completion transaction within the queue. When clear, no timer has expired. ** 14:10 00000 2 Reserved ** 09 0 2 SERR# Detected Interrupt Enable - When set, the Intel XScale core is signalled an HPI# interrupt ** when the ATU detects that SERR# was asserted. When clear, ** the Intel XScale core is not interrupted when SERR# is detected. ** 08 0 2 Direct Addressing Enable - Setting this bit enables direct outbound addressing through the ATU. ** Internal bus cycles with an address between 0000.0040H and 7FFF.FFFFH automatically forwards to ** the PCI bus with or without translation of address bit 31 based on the setting of bit 18 of ** the ATUCR. ** 07:04 0000 2 Reserved ** 03 0 2 ATU BIST Interrupt Enable - When set, enables an interrupt to the Intel XScale core when the start ** BIST bit is set in the ATUBISTR register. This bit is also reflected as the BIST Capable bit 7 ** in the ATUBISTR register. ** 02 0 2 Reserved ** 01 0 2 Outbound ATU Enable - When set, enables the outbound address translation unit. ** When cleared, disables the outbound ATU. ** 00 0 2 Reserved *********************************************************************************** */ #define ARCMSR_ATU_CONFIGURATION_REG 0x80 /*dword 0x83,0x82,0x81,0x80*/ /* *********************************************************************************** ** PCI Configuration and Status Register - PCSR ** ** The PCI Configuration and Status Register has additional bits for controlling and monitoring ** various features of the PCI bus interface. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:19 0000H Reserved ** 18 0 2 Detected Address or Attribute Parity Error - set when a parity error is detected during either the address ** or attribute phase of a transaction on the PCI bus even when the ATUCMD register Parity Error ** Response bit is cleared. Set under the following conditions: ** ĦE Any Address or Attribute (PCI-X Only) Parity Error on the Bus (including one generated by the ATU). ** 17:16 Varies with ** external state ** of DEVSEL#, ** STOP#, and ** TRDY#, ** during ** P_RST# ** PCI-X capability - These two bits define the mode of ** the PCI bus (conventional or PCI-X) as well as the ** operating frequency in the case of PCI-X mode. ** 00 - Conventional PCI mode ** 01 - PCI-X 66 ** 10 - PCI-X 100 ** 11 - PCI-X 133 ** As defined by the PCI-X Addendum to the PCI Local Bus Specification, ** Revision 1.0a, the operating ** mode is determined by an initialization pattern on the PCI bus during ** P_RST# assertion: ** DEVSEL# STOP# TRDY# Mode ** Deasserted Deasserted Deasserted Conventional ** Deasserted Deasserted Asserted PCI-X 66 ** Deasserted Asserted Deasserted PCI-X 100 ** Deasserted Asserted Asserted PCI-X 133 ** All other patterns are reserved. ** 15 0 2 ** Outbound Transaction Queue Busy: ** 0=Outbound Transaction Queue Empty ** 1=Outbound Transaction Queue Busy ** 14 0 2 ** Inbound Transaction Queue Busy: ** 0=Inbound Transaction Queue Empty ** 1=Inbound Transaction Queue Busy ** 13 0 2 Reserved. ** 12 0 2 Discard Timer Value - This bit controls the time-out value ** for the four discard timers attached to the queues holding read data. ** A value of 0 indicates the time-out value is 2 15 clocks. ** A value of 1 indicates the time-out value is 2 10 clocks. ** 11 0 2 Reserved. ** 10 Varies with ** external state ** of M66EN ** during ** P_RST# ** Bus Operating at 66 MHz - When set, the interface has been initialized to function at 66 MHz in ** Conventional PCI mode by the assertion of M66EN during bus initialization. ** When clear, the interface ** has been initialized as a 33 MHz bus. ** NOTE: When PCSR bits 17:16 are not equal to zero, then this bit is meaningless since the 80331 is operating in PCI-X mode. ** 09 0 2 Reserved ** 08 Varies with ** external state ** of REQ64# ** during ** P_RST# ** PCI Bus 64-Bit Capable - When clear, the PCI bus interface has been ** configured as 64-bit capable by ** the assertion of REQ64# on the rising edge of P_RST#. When set, ** the PCI interface is configured as ** 32-bit only. ** 07:06 00 2 Reserved. ** 05 0 2 Reset Internal Bus - This bit controls the reset of the Intel XScale core ** and all units on the internal ** bus. In addition to the internal bus initialization, ** this bit triggers the assertion of the M_RST# pin for ** initialization of registered DIMMs. When set: ** When operating in the conventional PCI mode: ** ĦE All current PCI transactions being mastered by the ATU completes, ** and the ATU master interfaces ** proceeds to an idle state. No additional transactions is mastered by these units ** until the internal bus reset is complete. ** ĦE All current transactions being slaved by the ATU on either the PCI bus ** or the internal bus ** completes, and the ATU target interfaces proceeds to an idle state. ** All future slave transactions master aborts, ** with the exception of the completion cycle for the transaction that set the Reset ** Internal Bus bit in the PCSR. ** ĦE When the value of the Core Processor Reset bit in the PCSR (upon P_RST# assertion) ** is set, the Intel XScale core is held in reset when the internal bus reset is complete. ** ĦE The ATU ignores configuration cycles, and they appears as master aborts for: 32 ** Internal Bus clocks. ** ĦE The 80331 hardware clears this bit after the reset operation completes. ** When operating in the PCI-X mode: ** The ATU hardware responds the same as in Conventional PCI-X mode. ** However, this may create a problem in PCI-X mode for split requests in ** that there may still be an outstanding split completion that the ** ATU is either waiting to receive (Outbound Request) or initiate ** (Inbound Read Request). For a cleaner ** internal bus reset, host software can take the following steps prior ** to asserting Reset Internal bus: ** 1. Clear the Bus Master (bit 2 of the ATUCMD) and the Memory Enable (bit 1 of the ATUCMD) bits in ** the ATUCMD. This ensures that no new transactions, either outbound or inbound are enqueued. ** 2. Wait for both the Outbound (bit 15 of the PCSR) and Inbound Read (bit 14 of the PCSR) Transaction ** queue busy bits to be clear. ** 3. Set the Reset Internal Bus bit ** As a result, the ATU hardware resets the internal bus using the same logic as in conventional mode, ** however the user is now assured that the ATU no longer has any pending inbound or outbound split ** completion transactions. ** NOTE: Since the Reset Internal Bus bit is set using an inbound configuration cycle, the user is ** guaranteed that any prior configuration cycles have properly completed since there is only a one ** deep transaction queue for configuration transaction requests. The ATU sends the appropriate ** Split Write Completion Message to the Requester prior to the onset of Internal Bus Reset. ** 04 0 2 Bus Master Indicator Enable: Provides software control for the ** Bus Master Indicator signal P_BMI used ** for external RAIDIOS logic control of private devices. Only valid when operating with the bridge and ** central resource/arbiter disabled (BRG_EN =low, ARB_EN=low). ** 03 Varies with external state of PRIVDEV during ** P_RST# ** Private Device Enable - This bit indicates the state of the reset strap which enables the private device ** control mechanism within the PCI-to-PCI Bridge SISR configuration register. ** 0=Private Device control Disabled - SISR register bits default to zero ** 1=Private Device control Enabled - SISR register bits default to one ** 02 Varies with external state of RETRY during P_RST# ** Configuration Cycle Retry - When this bit is set, the PCI interface of the 80331 responds to all ** configuration cycles with a Retry condition. When clear, the 80331 responds to the appropriate ** configuration cycles. ** The default condition for this bit is based on the external state of the RETRY pin at the rising edge of ** P_RST#. When the external state of the pin is high, the bit is set. When the external state of the pin is ** low, the bit is cleared. ** 01 Varies with external state of CORE_RST# during P_RST# ** Core Processor Reset - This bit is set to its default value by the hardware when either P_RST# is ** asserted or the Reset Internal Bus bit in PCSR is set. When this bit is set, the Intel XScale core is ** being held in reset. Software cannot set this bit. Software is required to clear this bit to deassert Intel ** XScale core reset. ** The default condition for this bit is based on the external state of the CORE_RST# pin at the rising edge ** of P_RST#. When the external state of the pin is low, the bit is set. When the external state of the pin is ** high, the bit is clear. ** 00 Varies with external state of PRIVMEM during P_RST# ** Private Memory Enable - This bit indicates the state of the reset strap which enables the private device ** control mechanism within the PCI-to-PCI Bridge SDER configuration register. ** 0=Private Memory control Disabled - SDER register bit 2 default to zero ** 1=Private Memory control Enabled - SDER register bits 2 default to one *********************************************************************************** */ #define ARCMSR_PCI_CONFIGURATION_STATUS_REG 0x84 /*dword 0x87,0x86,0x85,0x84*/ /* *********************************************************************************** ** ATU Interrupt Status Register - ATUISR ** ** The ATU Interrupt Status Register is used to notify the core processor of the source of an ATU ** interrupt. In addition, this register is written to clear the source of the interrupt to the interrupt unit ** of the 80331. All bits in this register are Read/Clear. ** Bits 4:0 are a direct reflection of bits 14:11 and bit 8 (respectively) of the ATU Status Register ** (these bits are set at the same time by hardware but need to be cleared independently). Bit 7 is set ** by an error associated with the internal bus of the 80331. Bit 8 is for software BIST. The ** conditions that result in an ATU interrupt are cleared by writing a 1 to the appropriate bits in this ** register. ** Note: Bits 4:0, and bits 15 and 13:7 can result in an interrupt being driven to the Intel XScale core. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:18 0000H Reserved ** 17 0 2 VPD Address Register Updated - This bit is set when a PCI bus configuration write occurs to the VPDAR ** register. Configuration register writes to the VPDAR does NOT result in bit 15 also being set. When set, ** this bit results in the assertion of the ATU Configure Register Write Interrupt. ** 16 0 2 Reserved ** 15 0 2 ATU Configuration Write - This bit is set when a PCI bus configuration write occurs to any ATU register. ** When set, this bit results in the assertion of the ATU Configure Register Write Interrupt. ** 14 0 2 ATU Inbound Memory Window 1 Base Updated - This bit is set when a PCI bus configuration write ** occurs to either the IABAR1 register or the IAUBAR1 register. Configuration register writes to these ** registers deos NOT result in bit 15 also being set. When set, this bit results in the assertion of the ATU ** Configure Register Write Interrupt. ** 13 0 2 Initiated Split Completion Error Message - This bit is set when the device initiates a Split Completion ** Message on the PCI Bus with the Split Completion Error attribute bit set. ** 12 0 2 Received Split Completion Error Message - This bit is set when the device receives a Split Completion ** Message from the PCI Bus with the Split Completion Error attribute bit set. ** 11 0 2 Power State Transition - When the Power State Field of the ATU Power Management Control/Status ** Register is written to transition the ATU function Power State from D0 to D3, D0 to D1, or D3 to D0 and ** the ATU Power State Transition Interrupt mask bit is cleared, this bit is set. ** 10 0 2 P_SERR# Asserted - set when P_SERR# is asserted on the PCI bus by the ATU. ** 09 0 2 Detected Parity Error - set when a parity error is detected on the PCI bus even when the ATUCMD ** registerĦĤs Parity Error Response bit is cleared. Set under the following conditions: ** ĦE Write Data Parity Error when the ATU is a target (inbound write). ** ĦE Read Data Parity Error when the ATU is an initiator (outbound read). ** ĦE Any Address or Attribute (PCI-X Only) Parity Error on the Bus. ** 08 0 2 ATU BIST Interrupt - When set, generates the ATU BIST Start Interrupt and indicates the host processor ** has set the Start BIST bit (ATUBISTR register bit 6), when the ATU BIST interrupt is enabled (ATUCR ** register bit 3). The Intel XScale core can initiate the software BIST and store the result in ATUBISTR ** register bits 3:0. ** Configuration register writes to the ATUBISTR does NOT result in bit 15 also being set or the assertion ** of the ATU Configure Register Write Interrupt. ** 07 0 2 Internal Bus Master Abort - set when a transaction initiated by the ATU internal bus initiator interface ends in a Master-abort. ** 06:05 00 2 Reserved. ** 04 0 2 P_SERR# Detected - set when P_SERR# is detected on the PCI bus by the ATU. ** 03 0 2 PCI Master Abort - set when a transaction initiated by the ATU PCI initiator interface ends in a Master-abort. ** 02 0 2 PCI Target Abort (master) - set when a transaction initiated by the ATU PCI master interface ends in a Target-abort. ** 01 0 2 PCI Target Abort (target) - set when the ATU interface, acting as a target, terminates the transaction on the PCI bus with a target abort. ** 00 0 2 PCI Master Parity Error - Master Parity Error - The ATU interface sets this bit under the following ** conditions: ** ĦE The ATU asserted PERR# itself or the ATU observed PERR# asserted. ** ĦE And the ATU acted as the requester for the operation in which the error occurred. ** ĦE And the ATUCMD registerĦĤs Parity Error Response bit is set ** ĦE Or (PCI-X Mode Only) the ATU received a Write Data Parity Error Message ** ĦE And the ATUCMD registerĦĤs Parity Error Response bit is set *********************************************************************************** */ #define ARCMSR_ATU_INTERRUPT_STATUS_REG 0x88 /*dword 0x8B,0x8A,0x89,0x88*/ /* *********************************************************************************** ** ATU Interrupt Mask Register - ATUIMR ** ** The ATU Interrupt Mask Register contains the control bit to enable and disable interrupts ** generated by the ATU. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:15 0 0000H Reserved ** 14 0 2 VPD Address Register Updated Mask - Controls the setting of bit 17 of the ATUISR and generation of the ** ATU Configuration Register Write interrupt when a PCI bus write occurs to the VPDAR register. ** 0=Not Masked ** 1=Masked ** 13 0 2 Reserved ** 12 0 2 Configuration Register Write Mask - Controls the setting of bit 15 of the ATUISR and generation of the ** ATU Configuration Register Write interrupt when a PCI bus write occurs to any ATU configuration register ** except those covered by mask bit 11 and bit 14 of this register, and ATU BIST enable bit 3 of the ATUCR. ** 0=Not Masked ** 1=Masked ** 11 1 2 ATU Inbound Memory Window 1 Base Updated Mask - Controls the setting of bit 14 of the ATUISR and ** generation of the ATU Configuration Register Write interrupt when a PCI bus write occurs to either the ** IABAR1 register or the IAUBAR1 register. ** 0=Not Masked ** 1=Masked ** 10 0 2 Initiated Split Completion Error Message Interrupt Mask - Controls the setting of bit 13 of the ATUISR and ** generation of the ATU Error interrupt when the ATU initiates a Split Completion Error Message. ** 0=Not Masked ** 1=Masked ** 09 0 2 Received Split Completion Error Message Interrupt Mask- Controls the setting of bit 12 of the ATUISR ** and generation of the ATU Error interrupt when a Split Completion Error Message results in bit 29 of the ** PCIXSR being set. ** 0=Not Masked ** 1=Masked ** 08 1 2 Power State Transition Interrupt Mask - Controls the setting of bit 12 of the ATUISR and generation of the ** ATU Error interrupt when ATU Power Management Control/Status Register is written to transition the ** ATU Function Power State from D0 to D3, D0 to D1, D1 to D3 or D3 to D0. ** 0=Not Masked ** 1=Masked ** 07 0 2 ATU Detected Parity Error Interrupt Mask - Controls the setting of bit 9 of the ATUISR and generation of ** the ATU Error interrupt when a parity error detected on the PCI bus that sets bit 15 of the ATUSR. ** 0=Not Masked ** 1=Masked ** 06 0 2 ATU SERR# Asserted Interrupt Mask - Controls the setting of bit 10 of the ATUISR and generation of the ** ATU Error interrupt when SERR# is asserted on the PCI interface resulting in bit 14 of the ATUSR being set. ** 0=Not Masked ** 1=Masked ** NOTE: This bit is specific to the ATU asserting SERR# and not detecting SERR# from another master. ** 05 0 2 ATU PCI Master Abort Interrupt Mask - Controls the setting of bit 3 of the ATUISR and generation of the ** ATU Error interrupt when a master abort error resulting in bit 13 of the ATUSR being set. ** 0=Not Masked ** 1=Masked ** 04 0 2 ATU PCI Target Abort (Master) Interrupt Mask- Controls the setting of bit 12 of the ATUISR and ATU Error ** generation of the interrupt when a target abort error resulting in bit 12 of the ATUSR being set ** 0=Not Masked ** 1=Masked ** 03 0 2 ATU PCI Target Abort (Target) Interrupt Mask- Controls the setting of bit 1 of the ATUISR and generation ** of the ATU Error interrupt when a target abort error resulting in bit 11 of the ATUSR being set. ** 0=Not Masked ** 1=Masked ** 02 0 2 ATU PCI Master Parity Error Interrupt Mask - Controls the setting of bit 0 of the ATUISR and generation ** of the ATU Error interrupt when a parity error resulting in bit 8 of the ATUSR being set. ** 0=Not Masked ** 1=Masked ** 01 0 2 ATU Inbound Error SERR# Enable - Controls when the ATU asserts (when enabled through the ** ATUCMD) SERR# on the PCI interface in response to a master abort on the internal bus during an ** inbound write transaction. ** 0=SERR# Not Asserted due to error ** 1=SERR# Asserted due to error ** 00 0 2 ATU ECC Target Abort Enable - Controls the ATU response on the PCI interface to a target abort (ECC ** error) from the memory controller on the internal bus. In conventional mode, this action only occurs ** during an inbound read transaction where the data phase that was target aborted on the internal bus is ** actually requested from the inbound read queue. ** 0=Disconnect with data ** (the data being up to 64 bits of 1ĦĤs) ** 1=Target Abort ** NOTE: In PCI-X Mode, The ATU initiates a Split Completion Error Message (with message class=2h - ** completer error and message index=81h - 80331 internal bus target abort) on the PCI bus, ** independent of the setting of this bit. *********************************************************************************** */ #define ARCMSR_ATU_INTERRUPT_MASK_REG 0x8C /*dword 0x8F,0x8E,0x8D,0x8C*/ /* *********************************************************************************** ** Inbound ATU Base Address Register 3 - IABAR3 ** ** . The Inbound ATU Base Address Register 3 (IABAR3) together with the Inbound ATU Upper Base Address Register 3 (IAUBAR3) defines the block ** of memory addresses where the inbound translation window 3 begins. ** . The inbound ATU decodes and forwards the bus request to the 80331 internal bus with a translated address to map into 80331 local memory. ** . The IABAR3 and IAUBAR3 define the base address and describes the required memory block size. ** . Bits 31 through 12 of the IABAR3 is either read/write bits or read only with a value of 0 depending on the value located within the IALR3. ** The programmed value within the base address register must comply with the PCI programming requirements for address alignment. ** Note: ** Since IABAR3 does not appear in the standard PCI configuration header space (offsets 00H - 3CH), ** IABAR3 is not configured by the host during normal system initialization. ** Warning: ** When a non-zero value is not written to IALR3, ** the user should not set either the Prefetchable Indicator ** or the Type Indicator for 64 bit addressability. ** This is the default for IABAR3. ** Assuming a non-zero value is written to IALR3, ** the user may set the Prefetchable Indicator ** or the Type Indicator: ** a. Since non prefetchable memory windows can never be placed above the 4 Gbyte address boundary, ** when the Prefetchable Indicator is not set, ** the user should also leave the Type Indicator set for 32 bit addressability. ** This is the default for IABAR3. ** b. when the Prefetchable Indicator is set, ** the user should also set the Type Indicator for 64 bit addressability. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 00000H Translation Base Address 3 - These bits define the actual location ** the translation function is to respond to when addressed from the PCI bus. ** 11:04 00H Reserved. ** 03 0 2 Prefetchable Indicator - When set, defines the memory space as prefetchable. ** 02:01 00 2 Type Indicator - Defines the width of the addressability for this memory window: ** 00 - Memory Window is locatable anywhere in 32 bit address space ** 10 - Memory Window is locatable anywhere in 64 bit address space ** 00 0 2 Memory Space Indicator - This bit field describes memory or I/O space base address. ** The ATU does not occupy I/O space, ** thus this bit must be zero. *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_BASE_ADDRESS3_REG 0x90 /*dword 0x93,0x92,0x91,0x90*/ /* *********************************************************************************** ** Inbound ATU Upper Base Address Register 3 - IAUBAR3 ** ** This register contains the upper base address when decoding PCI addresses beyond 4 GBytes. ** Together with the Translation Base Address this register defines the actual location ** the translation function is to respond to when addressed from the PCI bus for addresses > 4GBytes (for DACs). ** The programmed value within the base address register must comply with the PCI programming ** requirements for address alignment. ** Note: ** When the Type indicator of IABAR3 is set to indicate 32 bit addressability, ** the IAUBAR3 register attributes are read-only. ** This is the default for IABAR3. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:0 00000H Translation Upper Base Address 3 - Together with the Translation Base Address 3 these bits define ** the actual location the translation function is to respond to when addressed from the PCI bus for addresses > 4GBytes. *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_UPPER_BASE_ADDRESS3_REG 0x94 /*dword 0x97,0x96,0x95,0x94*/ /* *********************************************************************************** ** Inbound ATU Limit Register 3 - IALR3 ** ** Inbound address translation for memory window 3 occurs for data transfers occurring from the PCI ** bus (originated from the PCI bus) to the 80331 internal bus. The address translation block converts ** PCI addresses to internal bus addresses. ** The inbound translation base address for inbound window 3 is specified in Section 3.10.15. When ** determining block size requirements ĦX as described in Section 3.10.21 ĦX the translation limit ** register provides the block size requirements for the base address register. The remaining registers ** used for performing address translation are discussed in Section 3.2.1.1. ** The 80331 translate value registerĦĤs programmed value must be naturally aligned with the base ** address registerĦĤs programmed value. The limit register is used as a mask; thus, the lower address ** bits programmed into the 80331 translate value register are invalid. Refer to the PCI Local Bus ** Specification, Revision 2.3 for additional information on programming base address registers. ** Bits 31 to 12 within the IALR3 have a direct effect on the IABAR3 register, bits 31 to 12, with a ** one to one correspondence. A value of 0 in a bit within the IALR3 makes the corresponding bit ** within the IABAR3 a read only bit which always returns 0. A value of 1 in a bit within the IALR3 ** makes the corresponding bit within the IABAR3 read/write from PCI. Note that a consequence of ** this programming scheme is that unless a valid value exists within the IALR3, all writes to the ** IABAR3 has no effect since a value of all zeros within the IALR3 makes the IABAR3 a read only ** register. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 00000H Inbound Translation Limit 3 - This readback value determines the memory block size required ** for the ATUs memory window 3. ** 11:00 000H Reserved *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_LIMIT3_REG 0x98 /*dword 0x9B,0x9A,0x99,0x98*/ /* *********************************************************************************** ** Inbound ATU Translate Value Register 3 - IATVR3 ** ** The Inbound ATU Translate Value Register 3 (IATVR3) contains the internal bus address used to ** convert PCI bus addresses. The converted address is driven on the internal bus as a result of the ** inbound ATU address translation. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:12 00000H Inbound ATU Translation Value 3 - This value is used to convert the PCI address to internal bus addresses. ** This value must be 64-bit aligned on the internal bus. The default address allows the ATU to ** access the internal 80331 memory-mapped registers. ** 11:00 000H Reserved *********************************************************************************** */ #define ARCMSR_INBOUND_ATU_TRANSLATE_VALUE3_REG 0x9C /*dword 0x9F,0x9E,0x9D,0x9C*/ /* *********************************************************************************** ** Outbound Configuration Cycle Address Register - OCCAR ** ** The Outbound Configuration Cycle Address Register is used to hold the 32-bit PCI configuration ** cycle address. The Intel XScale core writes the PCI configuration cycles address which then ** enables the outbound configuration read or write. The Intel XScale core then performs a read or ** write to the Outbound Configuration Cycle Data Register to initiate the configuration cycle on the ** PCI bus. ** Note: Bits 15:11 of the configuration cycle address for Type 0 configuration cycles are defined differently ** for Conventional versus PCI-X modes. When 80331 software programs the OCCAR to initiate a ** Type 0 configuration cycle, the OCCAR should always be loaded based on the PCI-X definition for ** the Type 0 configuration cycle address. When operating in Conventional mode, the 80331 clears ** bits 15:11 of the OCCAR prior to initiating an outbound Type 0 configuration cycle. See the PCI-X ** Addendum to the PCI Local Bus Specification, Revision 1.0a for details on the two formats. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:00 0000 0000H Configuration Cycle Address - These bits define the 32-bit PCI address used during an outbound ** configuration read or write cycle. *********************************************************************************** */ #define ARCMSR_OUTBOUND_CONFIGURATION_CYCLE_ADDRESS_REG 0xA4 /*dword 0xA7,0xA6,0xA5,0xA4*/ /* *********************************************************************************** ** Outbound Configuration Cycle Data Register - OCCDR ** ** The Outbound Configuration Cycle Data Register is used to initiate a configuration read or write ** on the PCI bus. The register is logical rather than physical meaning that it is an address not a ** register. The Intel XScale core reads or writes the data registers memory-mapped address to ** initiate the configuration cycle on the PCI bus with the address found in the OCCAR. For a ** configuration write, the data is latched from the internal bus and forwarded directly to the OWQ. ** For a read, the data is returned directly from the ORQ to the Intel XScale core and is never ** actually entered into the data register (which does not physically exist). ** The OCCDR is only visible from 80331 internal bus address space and appears as a reserved value ** within the ATU configuration space. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:00 0000 0000H Configuration Cycle Data - These bits define the data used during an outbound configuration read ** or write cycle. *********************************************************************************** */ #define ARCMSR_OUTBOUND_CONFIGURATION_CYCLE_DATA_REG 0xAC /*dword 0xAF,0xAE,0xAD,0xAC*/ /* *********************************************************************************** ** VPD Capability Identifier Register - VPD_CAPID ** ** The Capability Identifier Register bits adhere to the definitions in the PCI Local Bus Specification, ** Revision 2.3. This register in the PCI Extended Capability header identifies the type of Extended ** Capability contained in that header. In the case of the 80331, this is the VPD extended capability ** with an ID of 03H as defined by the PCI Local Bus Specification, Revision 2.3. ** ----------------------------------------------------------------- ** Bit Default Description ** 07:00 03H Cap_Id - This field with itsĦĤ 03H value identifies this item in the linked list of Extended Capability ** Headers as being the VPD capability registers. *********************************************************************************** */ #define ARCMSR_VPD_CAPABILITY_IDENTIFIER_REG 0xB8 /*byte*/ /* *********************************************************************************** ** VPD Next Item Pointer Register - VPD_NXTP ** ** The Next Item Pointer Register bits adhere to the definitions in the PCI Local Bus Specification, ** Revision 2.3. This register describes the location of the next item in the functionĦĤs capability list. ** For the 80331, this the final capability list, and hence, this register is set to 00H. ** ----------------------------------------------------------------- ** Bit Default Description ** 07:00 00H Next_ Item_ Pointer - This field provides an offset into the functionĦĤs configuration space pointing to the ** next item in the functionĦĤs capability list. Since the VPD capabilities are the last in the linked list of ** extended capabilities in the 80331, the register is set to 00H. *********************************************************************************** */ #define ARCMSR_VPD_NEXT_ITEM_PTR_REG 0xB9 /*byte*/ /* *********************************************************************************** ** VPD Address Register - VPD_AR ** ** The VPD Address register (VPDAR) contains the DWORD-aligned byte address of the VPD to be ** accessed. The register is read/write and the initial value at power-up is indeterminate. ** A PCI Configuration Write to the VPDAR interrupts the Intel XScale core. Software can use ** the Flag setting to determine whether the configuration write was intended to initiate a read or ** write of the VPD through the VPD Data Register. ** ----------------------------------------------------------------- ** Bit Default Description ** 15 0 2 Flag - A flag is used to indicate when a transfer of data between the VPD Data Register and the storage ** component has completed. Please see Section 3.9, Ħ§Vital Product DataĦ¨ on page 201 for more details on ** how the 80331 handles the data transfer. ** 14:0 0000H VPD Address - This register is written to set the DWORD-aligned byte address used to read or write ** Vital Product Data from the VPD storage component. *********************************************************************************** */ #define ARCMSR_VPD_ADDRESS_REG 0xBA /*word 0xBB,0xBA*/ /* *********************************************************************************** ** VPD Data Register - VPD_DR ** ** This register is used to transfer data between the 80331 and the VPD storage component. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:00 0000H VPD Data - Four bytes are always read or written through this register to/from the VPD storage component. *********************************************************************************** */ #define ARCMSR_VPD_DATA_REG 0xBC /*dword 0xBF,0xBE,0xBD,0xBC*/ /* *********************************************************************************** ** Power Management Capability Identifier Register -PM_CAPID ** ** The Capability Identifier Register bits adhere to the definitions in the PCI Local Bus Specification, ** Revision 2.3. This register in the PCI Extended Capability header identifies the type of Extended ** Capability contained in that header. In the case of the 80331, this is the PCI Bus Power ** Management extended capability with an ID of 01H as defined by the PCI Bus Power Management ** Interface Specification, Revision 1.1. ** ----------------------------------------------------------------- ** Bit Default Description ** 07:00 01H Cap_Id - This field with itsĦĤ 01H value identifies this item in the linked list of Extended Capability ** Headers as being the PCI Power Management Registers. *********************************************************************************** */ #define ARCMSR_POWER_MANAGEMENT_CAPABILITY_IDENTIFIER_REG 0xC0 /*byte*/ /* *********************************************************************************** ** Power Management Next Item Pointer Register - PM_NXTP ** ** The Next Item Pointer Register bits adhere to the definitions in the PCI Local Bus Specification, ** Revision 2.3. This register describes the location of the next item in the functionĦĤs capability list. ** For the 80331, the next capability (MSI capability list) is located at off-set D0H. ** ----------------------------------------------------------------- ** Bit Default Description ** 07:00 D0H Next_ Item_ Pointer - This field provides an offset into the functionĦĤs configuration space pointing to the ** next item in the functionĦĤs capability list which in the 80331 is the MSI extended capabilities header. *********************************************************************************** */ #define ARCMSR_POWER_NEXT_ITEM_PTR_REG 0xC1 /*byte*/ /* *********************************************************************************** ** Power Management Capabilities Register - PM_CAP ** ** Power Management Capabilities bits adhere to the definitions in the PCI Bus Power Management ** Interface Specification, Revision 1.1. This register is a 16-bit read-only register which provides ** information on the capabilities of the ATU function related to power management. ** ----------------------------------------------------------------- ** Bit Default Description ** 15:11 00000 2 PME_Support - This function is not capable of asserting the PME# signal in any state, since PME# ** is not supported by the 80331. ** 10 0 2 D2_Support - This bit is set to 0 2 indicating that the 80331 does not support the D2 Power Management State ** 9 1 2 D1_Support - This bit is set to 1 2 indicating that the 80331 supports the D1 Power Management State ** 8:6 000 2 Aux_Current - This field is set to 000 2 indicating that the 80331 has no current requirements for the ** 3.3Vaux signal as defined in the PCI Bus Power Management Interface Specification, Revision 1.1 ** 5 0 2 DSI - This field is set to 0 2 meaning that this function requires a device specific initialization sequence ** following the transition to the D0 uninitialized state. ** 4 0 2 Reserved. ** 3 0 2 PME Clock - Since the 80331 does not support PME# signal generation this bit is cleared to 0 2 . ** 2:0 010 2 Version - Setting these bits to 010 2 means that this function complies with PCI Bus Power Management ** Interface Specification, Revision 1.1 *********************************************************************************** */ #define ARCMSR_POWER_MANAGEMENT_CAPABILITY_REG 0xC2 /*word 0xC3,0xC2*/ /* *********************************************************************************** ** Power Management Control/Status Register - PM_CSR ** ** Power Management Control/Status bits adhere to the definitions in the PCI Bus Power ** Management Interface Specification, Revision 1.1. This 16-bit register is the control and status ** interface for the power management extended capability. ** ----------------------------------------------------------------- ** Bit Default Description ** 15 0 2 PME_Status - This function is not capable of asserting the PME# signal in any state, since PME## is not ** supported by the 80331. ** 14:9 00H Reserved ** 8 0 2 PME_En - This bit is hardwired to read-only 0 2 since this function does not support PME# ** generation from any power state. ** 7:2 000000 2 Reserved ** 1:0 00 2 Power State - This 2-bit field is used both to determine the current power state ** of a function and to set the function into a new power state. The definition of the values is: ** 00 2 - D0 ** 01 2 - D1 ** 10 2 - D2 (Unsupported) ** 11 2 - D3 hot ** The 80331 supports only the D0 and D3 hot states. ** *********************************************************************************** */ #define ARCMSR_POWER_MANAGEMENT_CONTROL_STATUS_REG 0xC4 /*word 0xC5,0xC4*/ /* *********************************************************************************** ** PCI-X Capability Identifier Register - PX_CAPID ** ** The Capability Identifier Register bits adhere to the definitions in the PCI Local Bus Specification, ** Revision 2.3. This register in the PCI Extended Capability header identifies the type of Extended ** Capability contained in that header. In the case of the 80331, this is the PCI-X extended capability with ** an ID of 07H as defined by the PCI-X Addendum to the PCI Local Bus Specification, Revision 1.0a. ** ----------------------------------------------------------------- ** Bit Default Description ** 07:00 07H Cap_Id - This field with itsĦĤ 07H value identifies this item in the linked list of Extended Capability ** Headers as being the PCI-X capability registers. *********************************************************************************** */ #define ARCMSR_PCIX_CAPABILITY_IDENTIFIER_REG 0xE0 /*byte*/ /* *********************************************************************************** ** PCI-X Next Item Pointer Register - PX_NXTP ** ** The Next Item Pointer Register bits adhere to the definitions in the PCI Local Bus Specification, ** Revision 2.3. This register describes the location of the next item in the functionĦĤs capability list. ** By default, the PCI-X capability is the last capabilities list for the 80331, thus this register defaults ** to 00H. ** However, this register may be written to B8H prior to host configuration to include the VPD ** capability located at off-set B8H. ** Warning: Writing this register to any value other than 00H (default) or B8H is not supported and may ** produce unpredictable system behavior. ** In order to guarantee that this register is written prior to host configuration, the 80331 must be ** initialized at P_RST# assertion to Retry Type 0 configuration cycles (bit 2 of PCSR). Typically, ** the Intel XScale core would be enabled to boot immediately following P_RST# assertion in ** this case (bit 1 of PCSR), as well. Please see Table 125, Ħ§PCI Configuration and Status Register - ** PCSRĦ¨ on page 253 for more details on the 80331 initialization modes. ** ----------------------------------------------------------------- ** Bit Default Description ** 07:00 00H Next_ Item_ Pointer - This field provides an offset into the functionĦĤs configuration space pointing to the ** next item in the functionĦĤs capability list. Since the PCI-X capabilities are the last in the linked list of ** extended capabilities in the 80331, the register is set to 00H. ** However, this field may be written prior to host configuration with B8H to extend the list to include the ** VPD extended capabilities header. *********************************************************************************** */ #define ARCMSR_PCIX_NEXT_ITEM_PTR_REG 0xE1 /*byte*/ /* *********************************************************************************** ** PCI-X Command Register - PX_CMD ** ** This register controls various modes and features of ATU and Message Unit when operating in the ** PCI-X mode. ** ----------------------------------------------------------------- ** Bit Default Description ** 15:7 000000000 2 Reserved. ** 6:4 011 2 Maximum Outstanding Split Transactions - This register sets the maximum number of Split Transactions ** the device is permitted to have outstanding at one time. ** Register Maximum Outstanding ** 0 1 ** 1 2 ** 2 3 ** 3 4 ** 4 8 ** 5 12 ** 6 16 ** 7 32 ** 3:2 00 2 Maximum Memory Read Byte Count - This register sets the maximum byte count the device uses when ** initiating a Sequence with one of the burst memory read commands. ** Register Maximum Byte Count ** 0 512 ** 1 1024 ** 2 2048 ** 3 4096 ** 1 0 2 ** Enable Relaxed Ordering - The 80331 does not set the relaxed ordering bit in the Requester Attributes ** of Transactions. ** 0 0 2 Data Parity Error Recovery Enable - The device driver sets this bit to enable the device to attempt to ** recover from data parity errors. When this bit is 0 and the device is in PCI-X mode, the device asserts ** SERR# (when enabled) whenever the Master Data Parity Error bit (Status register, bit 8) is set. *********************************************************************************** */ #define ARCMSR_PCIX_COMMAND_REG 0xE2 /*word 0xE3,0xE2*/ /* *********************************************************************************** ** PCI-X Status Register - PX_SR ** ** This register identifies the capabilities and current operating mode of ATU, DMAs and Message ** Unit when operating in the PCI-X mode. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:30 00 2 Reserved ** 29 0 2 Received Split Completion Error Message - This bit is set when the device receives a Split Completion ** Message with the Split Completion Error attribute bit set. Once set, this bit remains set until software ** writes a 1 to this location. ** 0=no Split Completion error message received. ** 1=a Split Completion error message has been received. ** 28:26 001 2 Designed Maximum Cumulative Read Size (DMCRS) - The value of this register depends on the setting ** of the Maximum Memory Read Byte Count field of the PCIXCMD register: ** DMCRS Max ADQs Maximum Memory Read Byte Count Register Setting ** 1 16 512 (Default) ** 2 32 1024 ** 2 32 2048 ** 2 32 4096 ** 25:23 011 2 Designed Maximum Outstanding Split Transactions - The 80331 can have up to four outstanding split transactions. ** 22:21 01 2 Designed Maximum Memory Read Byte Count - The 80331 can generate memory reads with byte counts up ** to 1024 bytes. ** 20 1 2 80331 is a complex device. ** 19 0 2 Unexpected Split Completion - This bit is set when an unexpected Split Completion with this deviceĦĤs ** Requester ID is received. Once set, this bit remains set until software writes a 1 to this location. ** 0=no unexpected Split Completion has been received. ** 1=an unexpected Split Completion has been received. ** 18 0 2 Split Completion Discarded - This bit is set when the device discards a Split Completion because the ** requester would not accept it. See Section 5.4.4 of the PCI-X Addendum to the PCI Local Bus ** Specification, Revision 1.0a for details. Once set, this bit remains set until software writes a 1 to this ** location. ** 0=no Split Completion has been discarded. ** 1=a Split Completion has been discarded. ** NOTE: The 80331 does not set this bit since there is no Inbound address responding to Inbound Read ** Requests with Split Responses (Memory or Register) that has Ħ§read side effects.Ħ¨ ** 17 1 2 80331 is a 133 MHz capable device. ** 16 1 2 or P_32BITPCI# 80331 with bridge enabled (BRG_EN=1) implements the ATU with a 64-bit interface on the secondary PCI bus, ** therefore this bit is always set. ** 80331 with no bridge and central resource disabled (BRG_EN=0, ARB_EN=0), ** use this bit to identify the add-in card to the system as 64-bit or 32-bit wide via a user-configurable strap (P_32BITPCI#). ** This strap, by default, identifies the add in card based on 80331 with bridge disabled ** as 64-bit unless the user attaches the appropriate pull-down resistor to the strap. ** 0=The bus is 32 bits wide. ** 1=The bus is 64 bits wide. ** 15:8 FFH Bus Number - This register is read for diagnostic purposes only. It indicates the number of the bus ** segment for the device containing this function. The function uses this number as part of its Requester ** ID and Completer ID. For all devices other than the source bridge, each time the function is addressed ** by a Configuration Write transaction, the function must update this register with the contents of AD[7::0] ** of the attribute phase of the Configuration Write, regardless of which register in the function is ** addressed by the transaction. The function is addressed by a Configuration Write transaction when all of ** the following are true: ** 1. The transaction uses a Configuration Write command. ** 2. IDSEL is asserted during the address phase. ** 3. AD[1::0] are 00b (Type 0 configuration transaction). ** 4. AD[10::08] of the configuration address contain the appropriate function number. ** 7:3 1FH Device Number - This register is read for diagnostic purposes only. It indicates the number of the device ** containing this function, i.e., the number in the Device Number field (AD[15::11]) of the address of a ** Type 0 configuration transaction that is assigned to the device containing this function by the connection ** of the system hardware. The system must assign a device number other than 00h (00h is reserved for ** the source bridge). The function uses this number as part of its Requester ID and Completer ID. Each ** time the function is addressed by a Configuration Write transaction, the device must update this register ** with the contents of AD[15::11] of the address phase of the Configuration Write, regardless of which ** register in the function is addressed by the transaction. The function is addressed by a Configuration ** Write transaction when all of the following are true: ** 1. The transaction uses a Configuration Write command. ** 2. IDSEL is asserted during the address phase. ** 3. AD[1::0] are 00b (Type 0 configuration transaction). ** 4. AD[10::08] of the configuration address contain the appropriate function number. ** 2:0 000 2 Function Number - This register is read for diagnostic purposes only. It indicates the number of this ** function; i.e., the number in the Function Number field (AD[10::08]) of the address of a Type 0 ** configuration transaction to which this function responds. The function uses this number as part of its ** Requester ID and Completer ID. ** ************************************************************************** */ #define ARCMSR_PCIX_STATUS_REG 0xE4 /*dword 0xE7,0xE6,0xE5,0xE4*/ /* ************************************************************************** ** Inbound Read Transaction ** ======================================================================== ** An inbound read transaction is initiated by a PCI initiator and is targeted at either 80331 local ** memory or a 80331 memory-mapped register space. The read transaction is propagated through ** the inbound transaction queue (ITQ) and read data is returned through the inbound read queue ** (IRQ). ** When operating in the conventional PCI mode, all inbound read transactions are processed as ** delayed read transactions. When operating in the PCI-X mode, all inbound read transactions are ** processed as split transactions. The ATUs PCI interface claims the read transaction and forwards ** the read request through to the internal bus and returns the read data to the PCI bus. Data flow for ** an inbound read transaction on the PCI bus is summarized in the following statements: ** ĦE The ATU claims the PCI read transaction when the PCI address is within the inbound ** translation window defined by ATU Inbound Base Address Register (and Inbound Upper Base ** Address Register during DACs) and Inbound Limit Register. ** ĦE When operating in the conventional PCI mode, when the ITQ is currently holding transaction ** information from a previous delayed read, the current transaction information is compared to ** the previous transaction information (based on the setting of the DRC Alias bit in ** Section 3.10.39, Ħ§ATU Configuration Register - ATUCRĦ¨ on page 252). When there is a ** match and the data is in the IRQ, return the data to the master on the PCI bus. When there is a ** match and the data is not available, a Retry is signaled with no other action taken. When there ** is not a match and when the ITQ has less than eight entries, capture the transaction ** information, signal a Retry and initiate a delayed transaction. When there is not a match and ** when the ITQ is full, then signal a Retry with no other action taken. ** ĦX When an address parity error is detected, the address parity response defined in ** Section 3.7 is used. ** ĦE When operating in the conventional PCI mode, once read data is driven onto the PCI bus from ** the IRQ, it continues until one of the following is true: ** ĦX The initiator completes the PCI transaction. When there is data left unread in the IRQ, the ** data is flushed. ** ĦX An internal bus Target Abort was detected. In this case, the QWORD associated with the ** Target Abort is never entered into the IRQ, and therefore is never returned. ** ĦX Target Abort or a Disconnect with Data is returned in response to the Internal Bus Error. ** ĦX The IRQ becomes empty. In this case, the PCI interface signals a Disconnect with data to ** the initiator on the last data word available. ** ĦE When operating in the PCI-X mode, when ITQ is not full, the PCI address, attribute and ** command are latched into the available ITQ and a Split Response Termination is signalled to ** the initiator. ** ĦE When operating in the PCI-X mode, when the transaction does not cross a 1024 byte aligned ** boundary, then the ATU waits until it receives the full byte count from the internal bus target ** before returning read data by generating the split completion transaction on the PCI-X bus. ** When the read requested crosses at least one 1024 byte boundary, then ATU completes the ** transfer by returning data in 1024 byte aligned chunks. ** ĦE When operating in the PCI-X mode, once a split completion transaction has started, it ** continues until one of the following is true: ** ĦX The requester (now the target) generates a Retry Termination, or a Disconnection at Next ** ADB (when the requester is a bridge) ** ĦX The byte count is satisfied. ** ĦX An internal bus Target Abort was detected. The ATU generates a Split Completion ** Message (message class=2h - completer error, and message index=81h - target abort) to ** inform the requester about the abnormal condition. The ITQ for this transaction is flushed. ** Refer to Section 3.7.1. ** ĦX An internal bus Master Abort was detected. The ATU generates a Split Completion ** Message (message class=2h - completer error, and message index=80h - Master abort) to ** inform the requester about the abnormal condition. The ITQ for this transaction is flushed. ** Refer to Section 3.7.1 ** ĦE When operating in the conventional PCI mode, when the master inserts wait states on the PCI ** bus, the ATU PCI slave interface waits with no premature disconnects. ** ĦE When a data parity error occurs signified by PERR# asserted from the initiator, no action is ** taken by the target interface. Refer to Section 3.7.2.5. ** ĦE When operating in the conventional PCI mode, when the read on the internal bus is ** target-aborted, either a target-abort or a disconnect with data is signaled to the initiator. This is ** based on the ATU ECC Target Abort Enable bit (bit 0 of the ATUIMR for ATU). When set, a ** target abort is used, when clear, a disconnect is used. ** ĦE When operating in the PCI-X mode (with the exception of the MU queue ports at offsets 40h ** and 44h), when the transaction on the internal bus resulted in a target abort, the ATU generates ** a Split Completion Message (message class=2h - completer error, and message index=81h - ** internal bus target abort) to inform the requester about the abnormal condition. For the MU ** queue ports, the ATU returns either a target abort or a single data phase disconnect depending ** on the ATU ECC Target Abort Enable bit (bit 0 of the ATUIMR for ATU). The ITQ for this ** transaction is flushed. Refer to Section 3.7.1. ** ĦE When operating in the conventional PCI mode, when the transaction on the internal bus ** resulted in a master abort, the ATU returns a target abort to inform the requester about the ** abnormal condition. The ITQ for this transaction is flushed. Refer to Section 3.7.1 ** ĦE When operating in the PCI-X mode, when the transaction on the internal bus resulted in a ** master abort, the ATU generates a Split Completion Message (message class=2h - completer ** error, and message index=80h - internal bus master abort) to inform the requester about the ** abnormal condition. The ITQ for this transaction is flushed. Refer to Section 3.7.1. ** ĦE When operating in the PCI-X mode, when the Split Completion transaction completes with ** either Master-Abort or Target-Abort, the requester is indicating a failure condition that ** prevents it from accepting the completion it requested. In this case, since the Split Request ** addresses a location that has no read side effects, the completer must discard the Split ** Completion and take no further action. ** The data flow for an inbound read transaction on the internal bus is summarized in the following ** statements: ** ĦE The ATU internal bus master interface requests the internal bus when a PCI address appears in ** an ITQ and transaction ordering has been satisfied. When operating in the PCI-X mode the ** ATU does not use the information provided by the Relax Ordering Attribute bit. That is, ATU ** always uses conventional PCI ordering rules. ** ĦE Once the internal bus is granted, the internal bus master interface drives the translated address ** onto the bus and wait for IB_DEVSEL#. When a Retry is signaled, the request is repeated. ** When a master abort occurs, the transaction is considered complete and a target abort is loaded ** into the associated IRQ for return to the PCI initiator (transaction is flushed once the PCI ** master has been delivered the target abort). ** ĦE Once the translated address is on the bus and the transaction has been accepted, the internal ** bus target starts returning data with the assertion of IB_TRDY#. Read data is continuously ** received by the IRQ until one of the following is true: ** ĦX The full byte count requested by the ATU read request is received. The ATU internal bus ** initiator interface performs a initiator completion in this case. ** ĦX When operating in the conventional PCI mode, a Target Abort is received on the internal ** bus from the internal bus target. In this case, the transaction is aborted and the PCI side is ** informed. ** ĦX When operating in the PCI-X mode, a Target Abort is received on the internal bus from ** the internal bus target. In this case, the transaction is aborted. The ATU generates a Split ** Completion Message (message class=2h - completer error, and message index=81h - ** target abort) on the PCI bus to inform the requester about the abnormal condition. The ** ITQ for this transaction is flushed. ** ĦX When operating in the conventional PCI mode, a single data phase disconnection is ** received from the internal bus target. When the data has not been received up to the next ** QWORD boundary, the ATU internal bus master interface attempts to reacquire the bus. ** When not, the bus returns to idle. ** ĦX When operating in the PCI-X mode, a single data phase disconnection is received from ** the internal bus target. The ATU IB initiator interface attempts to reacquire the bus to ** obtain remaining data. ** ĦX When operating in the conventional PCI mode, a disconnection at Next ADB is received ** from the internal bus target. The bus returns to idle. ** ĦX When operating in the PCI-X mode, a disconnection at Next ADB is received from the ** internal bus target. The ATU IB initiator interface attempts to reacquire the bus to obtain ** remaining data. ** To support PCI Local Bus Specification, Revision 2.0 devices, the ATU can be programmed to ** ignore the memory read command (Memory Read, Memory Read Line, and Memory Read ** Multiple) when trying to match the current inbound read transaction with data in a DRC queue ** which was read previously (DRC on target bus). When the Read Command Alias Bit in the ** ATUCR register is set, the ATU does not distinguish the read commands on transactions. For ** example, the ATU enqueues a DRR with a Memory Read Multiple command and performs the read ** on the internal bus. Some time later, a PCI master attempts a Memory Read with the same address ** as the previous Memory Read Multiple. When the Read Command Bit is set, the ATU would return ** the read data from the DRC queue and consider the Delayed Read transaction complete. When the ** Read Command bit in the ATUCR was clear, the ATU would not return data since the PCI read ** commands did not match, only the address. ************************************************************************** */ /* ************************************************************************** ** Inbound Write Transaction **======================================================================== ** An inbound write transaction is initiated by a PCI master and is targeted at either 80331 local ** memory or a 80331 memory-mapped register. ** Data flow for an inbound write transaction on the PCI bus is summarized as: ** ĦE The ATU claims the PCI write transaction when the PCI address is within the inbound ** translation window defined by the ATU Inbound Base Address Register (and Inbound Upper ** Base Address Register during DACs) and Inbound Limit Register. ** ĦE When the IWADQ has at least one address entry available and the IWQ has at least one buffer ** available, the address is captured and the first data phase is accepted. ** ĦE The PCI interface continues to accept write data until one of the following is true: ** ĦX The initiator performs a disconnect. ** ĦX The transaction crosses a buffer boundary. ** ĦE When an address parity error is detected during the address phase of the transaction, the ** address parity error mechanisms are used. Refer to Section 3.7.1 for details of the address ** parity error response. ** ĦE When operating in the PCI-X mode when an attribute parity error is detected, the attribute ** parity error mechanism described in Section 3.7.1 is used. ** ĦE When a data parity error is detected while accepting data, the slave interface sets the ** appropriate bits based on PCI specifications. No other action is taken. Refer to Section 3.7.2.6 ** for details of the inbound write data parity error response. ** Once the PCI interface places a PCI address in the IWADQ, when IWQ has received data sufficient ** to cross a buffer boundary or the master disconnects on the PCI bus, the ATUs internal bus ** interface becomes aware of the inbound write. When there are additional write transactions ahead ** in the IWQ/IWADQ, the current transaction remains posted until ordering and priority have been ** satisfied (Refer to Section 3.5.3) and the transaction is attempted on the internal bus by the ATU ** internal master interface. The ATU does not insert target wait states nor do data merging on the PCI ** interface, when operating in the PCI mode. ** In the PCI-X mode memory writes are always executed as immediate transactions, while ** configuration write transactions are processed as split transactions. The ATU generates a Split ** Completion Message, (with Message class=0h - Write Completion Class and Message index = ** 00h - Write Completion Message) once a configuration write is successfully executed. ** Also, when operating in the PCI-X mode a write sequence may contain multiple write transactions. ** The ATU handles such transactions as independent transactions. ** Data flow for the inbound write transaction on the internal bus is summarized as: ** ĦE The ATU internal bus master requests the internal bus when IWADQ has at least one entry ** with associated data in the IWQ. ** ĦE When the internal bus is granted, the internal bus master interface initiates the write ** transaction by driving the translated address onto the internal bus. For details on inbound ** address translation. ** ĦE When IB_DEVSEL# is not returned, a master abort condition is signaled on the internal bus. ** The current transaction is flushed from the queue and SERR# may be asserted on the PCI ** interface. ** ĦE The ATU initiator interface asserts IB_REQ64# to attempt a 64-bit transfer. When ** IB_ACK64# is not returned, a 32-bit transfer is used. Transfers of less than 64-bits use the ** IB_C/BE[7:0]# to mask the bytes not written in the 64-bit data phase. Write data is transferred ** from the IWQ to the internal bus when data is available and the internal bus interface retains ** internal bus ownership. ** ĦE The internal bus interface stops transferring data from the current transaction to the internal ** bus when one of the following conditions becomes true: ** ĦX The internal bus initiator interface loses bus ownership. The ATU internal initiator ** terminates the transfer (initiator disconnection) at the next ADB (for the internal bus ADB ** is defined as a naturally aligned 128-byte boundary) and attempt to reacquire the bus to ** complete the delivery of remaining data using the same sequence ID but with the ** modified starting address and byte count. ** ĦX A Disconnect at Next ADB is signaled on the internal bus from the internal target. When ** the transaction in the IWQ completes at that ADB, the initiator returns to idle. When the ** transaction in the IWQ is not complete, the initiator attempts to reacquire the bus to ** complete the delivery of remaining data using the same sequence ID but with the ** modified starting address and byte count. ** ĦX A Single Data Phase Disconnect is signaled on the internal bus from the internal target. ** When the transaction in the IWQ needs only a single data phase, the master returns to idle. ** When the transaction in the IWQ is not complete, the initiator attempts to reacquire the ** bus to complete the delivery of remaining data using the same sequence ID but with the ** modified starting address and byte count. ** ĦX The data from the current transaction has completed (satisfaction of byte count). An ** initiator termination is performed and the bus returns to idle. ** ĦX A Master Abort is signaled on the internal bus. SERR# may be asserted on the PCI bus. ** Data is flushed from the IWQ. ***************************************************************** */ /* ************************************************************************** ** Inbound Read Completions Data Parity Errors **======================================================================== ** As an initiator, the ATU may encounter this error condition when operating in the PCI-X mode. ** When as the completer of a Split Read Request the ATU observes PERR# assertion during the split ** completion transaction, the ATU attempts to complete the transaction normally and no further ** action is taken. ************************************************************************** */ /* ************************************************************************** ** Inbound Configuration Write Completion Message Data Parity Errors **======================================================================== ** As an initiator, the ATU may encounter this error condition when operating in the PCI-X mode. ** When as the completer of a Configuration (Split) Write Request the ATU observes PERR# ** assertion during the split completion transaction, the ATU attempts to complete the transaction ** normally and no further action is taken. ************************************************************************** */ /* ************************************************************************** ** Inbound Read Request Data Parity Errors **===================== Immediate Data Transfer ========================== ** As a target, the ATU may encounter this error when operating in the Conventional PCI or PCI-X modes. ** Inbound read data parity errors occur when read data delivered from the IRQ is detected as having ** bad parity by the initiator of the transaction who is receiving the data. The initiator may optionally ** report the error to the system by asserting PERR#. As a target device in this scenario, no action is ** required and no error bits are set. **=====================Split Response Termination========================= ** As a target, the ATU may encounter this error when operating in the PCI-X mode. ** Inbound read data parity errors occur during the Split Response Termination. The initiator may ** optionally report the error to the system by asserting PERR#. As a target device in this scenario, no ** action is required and no error bits are set. ************************************************************************** */ /* ************************************************************************** ** Inbound Write Request Data Parity Errors **======================================================================== ** As a target, the ATU may encounter this error when operating in the Conventional or PCI-X modes. ** Data parity errors occurring during write operations received by the ATU may assert PERR# on ** the PCI Bus. When an error occurs, the ATU continues accepting data until the initiator of the write ** transaction completes or a queue fill condition is reached. Specifically, the following actions with ** the given constraints are taken by the ATU: ** ĦE PERR# is asserted two clocks cycles (three clock cycles when operating in the PCI-X mode) ** following the data phase in which the data parity error is detected on the bus. This is only ** done when the Parity Error Response bit in the ATUCMD is set. ** ĦE The Detected Parity Error bit in the ATUSR is set. When the ATU sets this bit, additional ** actions is taken: ** ĦX When the ATU Detected Parity Error Interrupt Mask bit in the ATUIMR is clear, set the ** Detected Parity Error bit in the ATUISR. When set, no action. *************************************************************************** */ /* *************************************************************************** ** Inbound Configuration Write Request ** ===================================================================== ** As a target, the ATU may encounter this error when operating in the Conventional or PCI-X modes. ** =============================================== ** Conventional PCI Mode ** =============================================== ** To allow for correct data parity calculations for delayed write transactions, the ATU delays the ** assertion of STOP# (signalling a Retry) until PAR is driven by the master. A parity error during a ** delayed write transaction (inbound configuration write cycle) can occur in any of the following ** parts of the transactions: ** ĦE During the initial Delayed Write Request cycle on the PCI bus when the ATU latches the ** address/command and data for delayed delivery to the internal configuration register. ** ĦE During the Delayed Write Completion cycle on the PCI bus when the ATU delivers the status ** of the operation back to the original master. ** The 80331 ATU PCI interface has the following responses to a delayed write parity error for ** inbound transactions during Delayed Write Request cycles with the given constraints: ** ĦE When the Parity Error Response bit in the ATUCMD is set, the ATU asserts TRDY# ** (disconnects with data) and two clock cycles later asserts PERR# notifying the initiator of the ** parity error. The delayed write cycle is not enqueued and forwarded to the internal bus. ** When the Parity Error Response bit in the ATUCMD is cleared, the ATU retries the ** transaction by asserting STOP# and enqueues the Delayed Write Request cycle to be ** forwarded to the internal bus. PERR# is not asserted. ** ĦE The Detected Parity Error bit in the ATUSR is set. When the ATU sets this bit, additional ** actions is taken: ** ĦX When the ATU Detected Parity Error Interrupt Mask bit in the ATUIMR is clear, set the ** Detected Parity Error bit in the ATUISR. When set, no action. ** For the original write transaction to be completed, the initiator retries the transaction on the PCI ** bus and the ATU returns the status from the internal bus, completing the transaction. ** For the Delayed Write Completion transaction on the PCI bus where a data parity error occurs and ** therefore does not agree with the status being returned from the internal bus (i.e. status being ** returned is normal completion) the ATU performs the following actions with the given constraints: ** ĦE When the Parity Error Response Bit is set in the ATUCMD, the ATU asserts TRDY# ** (disconnects with data) and two clocks later asserts PERR#. The Delayed Completion cycle in ** the IDWQ remains since the data of retried command did not match the data within the queue. ** ĦE The Detected Parity Error bit in the ATUSR is set. When the ATU sets this bit, additional ** actions is taken: ** ĦX When the ATU Detected Parity Error Interrupt Mask bit in the ATUIMR is clear, set the ** Detected Parity Error bit in the ATUISR. When set, no action. ** =================================================== ** PCI-X Mode ** =================================================== ** Data parity errors occurring during configuration write operations received by the ATU may cause ** PERR# assertion and delivery of a Split Completion Error Message on the PCI Bus. When an error ** occurs, the ATU accepts the write data and complete with a Split Response Termination. ** Specifically, the following actions with the given constraints are then taken by the ATU: ** ĦE When the Parity Error Response bit in the ATUCMD is set, PERR# is asserted three clocks ** cycles following the Split Response Termination in which the data parity error is detected on ** the bus. When the ATU asserts PERR#, additional actions is taken: ** ĦX A Split Write Data Parity Error message (with message class=2h - completer error and ** message index=01h - Split Write Data Parity Error) is initiated by the ATU on the PCI bus ** that addresses the requester of the configuration write. ** ĦX When the Initiated Split Completion Error Message Interrupt Mask in the ATUIMR is ** clear, set the Initiated Split Completion Error Message bit in the ATUISR. When set, no ** action. ** ĦX The Split Write Request is not enqueued and forwarded to the internal bus. ** ĦE The Detected Parity Error bit in the ATUSR is set. When the ATU sets this bit, additional ** actions is taken: ** ĦX When the ATU Detected Parity Error Interrupt Mask bit in the ATUIMR is clear, set the ** Detected Parity Error bit in the ATUISR. When set, no action. ** *************************************************************************** */ /* *************************************************************************** ** Split Completion Messages ** ======================================================================= ** As a target, the ATU may encounter this error when operating in the PCI-X mode. ** Data parity errors occurring during Split Completion Messages claimed by the ATU may assert ** PERR# (when enabled) or SERR# (when enabled) on the PCI Bus. When an error occurs, the ** ATU accepts the data and complete normally. Specifically, the following actions with the given ** constraints are taken by the ATU: ** ĦE PERR# is asserted three clocks cycles following the data phase in which the data parity error ** is detected on the bus. This is only done when the Parity Error Response bit in the ATUCMD ** is set. When the ATU asserts PERR#, additional actions is taken: ** ĦX The Master Parity Error bit in the ATUSR is set. ** ĦX When the ATU PCI Master Parity Error Interrupt Mask Bit in the ATUIMR is clear, set the ** PCI Master Parity Error bit in the ATUISR. When set, no action. ** ĦX When the SERR# Enable bit in the ATUCMD is set, and the Data Parity Error Recover ** Enable bit in the PCIXCMD register is clear, assert SERR#; otherwise no action is taken. ** When the ATU asserts SERR#, additional actions is taken: ** Set the SERR# Asserted bit in the ATUSR. ** When the ATU SERR# Asserted Interrupt Mask Bit in the ATUIMR is clear, set the ** SERR# Asserted bit in the ATUISR. When set, no action. ** When the ATU SERR# Detected Interrupt Enable Bit in the ATUCR is set, set the ** SERR# Detected bit in the ATUISR. When clear, no action. ** ĦE When the SCE bit (Split Completion Error -- bit 30 of the Completer Attributes) is set during ** the Attribute phase, the Received Split Completion Error Message bit in the PCIXSR is set. ** When the ATU sets this bit, additional actions is taken: ** ĦX When the ATU Received Split Completion Error Message Interrupt Mask bit in the ** ATUIMR is clear, set the Received Split Completion Error Message bit in the ATUISR. ** When set, no action. ** ĦE The Detected Parity Error bit in the ATUSR is set. When the ATU sets this bit, additional ** actions is taken: ** ĦX When the ATU Detected Parity Error Interrupt Mask bit in the ATUIMR is clear, set the ** Detected Parity Error bit in the ATUISR. When set, no action. ** ĦE The transaction associated with the Split Completion Message is discarded. ** ĦE When the discarded transaction was a read, a completion error message (with message ** class=2h - completer error and message index=82h - PCI bus read parity error) is generated on ** the internal bus of the 80331. ***************************************************************************** */ /* ****************************************************************************************************** ** Messaging Unit (MU) of the Intel R 80331 I/O processor (80331) ** ================================================================================================== ** The Messaging Unit (MU) transfers data between the PCI system and the 80331 ** notifies the respective system when new data arrives. ** The PCI window for messaging transactions is always the first 4 Kbytes of the inbound translation. ** window defined by: ** 1.Inbound ATU Base Address Register 0 (IABAR0) ** 2.Inbound ATU Limit Register 0 (IALR0) ** All of the Messaging Unit errors are reported in the same manner as ATU errors. ** Error conditions and status can be found in : ** 1.ATUSR ** 2.ATUISR **==================================================================================================== ** Mechanism Quantity Assert PCI Interrupt Signals Generate I/O Processor Interrupt **---------------------------------------------------------------------------------------------------- ** Message Registers 2 Inbound Optional Optional ** 2 Outbound **---------------------------------------------------------------------------------------------------- ** Doorbell Registers 1 Inbound Optional Optional ** 1 Outbound **---------------------------------------------------------------------------------------------------- ** Circular Queues 4 Circular Queues Under certain conditions Under certain conditions **---------------------------------------------------------------------------------------------------- ** Index Registers 1004 32-bit Memory Locations No Optional **==================================================================================================== ** PCI Memory Map: First 4 Kbytes of the ATU Inbound PCI Address Space **==================================================================================================== ** 0000H Reserved ** 0004H Reserved ** 0008H Reserved ** 000CH Reserved **------------------------------------------------------------------------ ** 0010H Inbound Message Register 0 ] ** 0014H Inbound Message Register 1 ] ** 0018H Outbound Message Register 0 ] ** 001CH Outbound Message Register 1 ] 4 Message Registers **------------------------------------------------------------------------ ** 0020H Inbound Doorbell Register ] ** 0024H Inbound Interrupt Status Register ] ** 0028H Inbound Interrupt Mask Register ] ** 002CH Outbound Doorbell Register ] ** 0030H Outbound Interrupt Status Register ] ** 0034H Outbound Interrupt Mask Register ] 2 Doorbell Registers and 4 Interrupt Registers **------------------------------------------------------------------------ ** 0038H Reserved ** 003CH Reserved **------------------------------------------------------------------------ ** 0040H Inbound Queue Port ] ** 0044H Outbound Queue Port ] 2 Queue Ports **------------------------------------------------------------------------ ** 0048H Reserved ** 004CH Reserved **------------------------------------------------------------------------ ** 0050H ] ** : ] ** : Intel Xscale Microarchitecture Local Memory ] ** : ] ** 0FFCH ] 1004 Index Registers ******************************************************************************* */ /* ***************************************************************************** ** Theory of MU Operation ***************************************************************************** **-------------------- ** inbound_msgaddr0: ** inbound_msgaddr1: ** outbound_msgaddr0: ** outbound_msgaddr1: ** . The MU has four independent messaging mechanisms. ** There are four Message Registers that are similar to a combination of mailbox and doorbell registers. ** Each holds a 32-bit value and generates an interrupt when written. **-------------------- ** inbound_doorbell: ** outbound_doorbell: ** . The two Doorbell Registers support software interrupts. ** When a bit is set in a Doorbell Register, an interrupt is generated. **-------------------- ** inbound_queueport: ** outbound_queueport: ** ** ** . The Circular Queues support a message passing scheme that uses 4 circular queues. ** The 4 circular queues are implemented in 80331 local memory. ** Two queues are used for inbound messages and two are used for outbound messages. ** Interrupts may be generated when the queue is written. **-------------------- ** local_buffer 0x0050 ....0x0FFF ** . The Index Registers use a portion of the 80331 local memory to implement a large set of message registers. ** When one of the Index Registers is written, an interrupt is generated and the address of the register written is captured. ** Interrupt status for all interrupts is recorded in the Inbound Interrupt Status Register and the Outbound Interrupt Status Register. ** Each interrupt generated by the Messaging Unit can be masked. **-------------------- ** . Multi-DWORD PCI burst accesses are not supported by the Messaging Unit, ** with the exception of Multi-DWORD reads to the index registers. ** In Conventional mode: the MU terminates Multi-DWORD PCI transactions ** (other than index register reads) with a disconnect at the next Qword boundary, with the exception of queue ports. ** In PCI-X mode : the MU terminates a Multi-DWORD PCI read transaction with a Split Response ** and the data is returned through split completion transaction(s). ** however, when the burst request crosses into or through the range of offsets 40h to 4Ch ** (e.g., this includes the queue ports) the transaction is signaled target-abort immediately on the PCI bus. ** In PCI-X mode, Multi-DWORD PCI writes is signaled a Single-Data-Phase Disconnect ** which means that no data beyond the first Qword (Dword when the MU does not assert P_ACK64#) is written. **-------------------- ** . All registers needed to configure and control the Messaging Unit are memory-mapped registers. ** The MU uses the first 4 Kbytes of the inbound translation window in the Address Translation Unit (ATU). ** This PCI address window is used for PCI transactions that access the 80331 local memory. ** The PCI address of the inbound translation window is contained in the Inbound ATU Base Address Register. **-------------------- ** . From the PCI perspective, the Messaging Unit is part of the Address Translation Unit. ** The Messaging Unit uses the PCI configuration registers of the ATU for control and status information. ** The Messaging Unit must observe all PCI control bits in the ATU Command Register and ATU Configuration Register. ** The Messaging Unit reports all PCI errors in the ATU Status Register. **-------------------- ** . Parts of the Messaging Unit can be accessed as a 64-bit PCI device. ** The register interface, message registers, doorbell registers, ** and index registers returns a P_ACK64# in response to a P_REQ64# on the PCI interface. ** Up to 1 Qword of data can be read or written per transaction (except Index Register reads). ** The Inbound and Outbound Queue Ports are always 32-bit addresses and the MU does not assert P_ACK64# to offsets 40H and 44H. ************************************************************************** */ /* ************************************************************************** ** Message Registers ** ============================== ** . Messages can be sent and received by the 80331 through the use of the Message Registers. ** . When written, the message registers may cause an interrupt to be generated to either the Intel XScale core or the host processor. ** . Inbound messages are sent by the host processor and received by the 80331. ** Outbound messages are sent by the 80331 and received by the host processor. ** . The interrupt status for outbound messages is recorded in the Outbound Interrupt Status Register. ** Interrupt status for inbound messages is recorded in the Inbound Interrupt Status Register. ** ** Inbound Messages: ** ----------------- ** . When an inbound message register is written by an external PCI agent, an interrupt may be generated to the Intel XScale core. ** . The interrupt may be masked by the mask bits in the Inbound Interrupt Mask Register. ** . The Intel XScale core interrupt is recorded in the Inbound Interrupt Status Register. ** The interrupt causes the Inbound Message Interrupt bit to be set in the Inbound Interrupt Status Register. ** This is a Read/Clear bit that is set by the MU hardware and cleared by software. ** The interrupt is cleared when the Intel XScale core writes a value of ** 1 to the Inbound Message Interrupt bit in the Inbound Interrupt Status Register. ** ------------------------------------------------------------------------ ** Inbound Message Register - IMRx ** ** . There are two Inbound Message Registers: IMR0 and IMR1. ** . When the IMR register is written, an interrupt to the Intel XScale core may be generated. ** The interrupt is recorded in the Inbound Interrupt Status Register and may be masked ** by the Inbound Message Interrupt Mask bit in the Inbound Interrupt Mask Register. ** ----------------------------------------------------------------- ** Bit Default Description ** 31:00 0000 0000H Inbound Message - This is a 32-bit message written by an external PCI agent. ** When written, an interrupt to the Intel XScale core may be generated. ************************************************************************** */ #define ARCMSR_MU_INBOUND_MESSAGE_REG0 0x10 /*dword 0x13,0x12,0x11,0x10*/ #define ARCMSR_MU_INBOUND_MESSAGE_REG1 0x14 /*dword 0x17,0x16,0x15,0x14*/ /* ************************************************************************** ** Outbound Message Register - OMRx ** -------------------------------- ** There are two Outbound Message Registers: OMR0 and OMR1. When the OMR register is ** written, a PCI interrupt may be generated. The interrupt is recorded in the Outbound Interrupt ** Status Register and may be masked by the Outbound Message Interrupt Mask bit in the Outbound ** Interrupt Mask Register. ** ** Bit Default Description ** 31:00 00000000H Outbound Message - This is 32-bit message written by the Intel XScale core. When written, an ** interrupt may be generated on the PCI Interrupt pin determined by the ATU Interrupt Pin Register. ************************************************************************** */ #define ARCMSR_MU_OUTBOUND_MESSAGE_REG0 0x18 /*dword 0x1B,0x1A,0x19,0x18*/ #define ARCMSR_MU_OUTBOUND_MESSAGE_REG1 0x1C /*dword 0x1F,0x1E,0x1D,0x1C*/ /* ************************************************************************** ** Doorbell Registers ** ============================== ** There are two Doorbell Registers: ** Inbound Doorbell Register ** Outbound Doorbell Register ** The Inbound Doorbell Register allows external PCI agents to generate interrupts to the Intel R XScale core. ** The Outbound Doorbell Register allows the Intel R XScale core to generate a PCI interrupt. ** Both Doorbell Registers may generate interrupts whenever a bit in the register is set. ** ** Inbound Doorbells: ** ------------------ ** . When the Inbound Doorbell Register is written by an external PCI agent, an interrupt may be generated to the Intel R XScale core. ** An interrupt is generated when any of the bits in the doorbell register is written to a value of 1. ** Writing a value of 0 to any bit does not change the value of that bit and does not cause an interrupt to be generated. ** . Once a bit is set in the Inbound Doorbell Register, it cannot be cleared by any external PCI agent. ** The interrupt is recorded in the Inbound Interrupt Status Register. ** . The interrupt may be masked by the Inbound Doorbell Interrupt mask bit in the Inbound Interrupt Mask Register. ** When the mask bit is set for a particular bit, no interrupt is generated for that bit. ** The Inbound Interrupt Mask Register affects only the generation of the normal messaging unit interrupt ** and not the values written to the Inbound Doorbell Register. ** One bit in the Inbound Doorbell Register is reserved for an Error Doorbell interrupt. ** . The interrupt is cleared when the Intel R XScale core writes a value of 1 to the bits in the Inbound Doorbell Register that are set. ** Writing a value of 0 to any bit does not change the value of that bit and does not clear the interrupt. ** ------------------------------------------------------------------------ ** Inbound Doorbell Register - IDR ** ** . The Inbound Doorbell Register (IDR) is used to generate interrupts to the Intel XScale core. ** . Bit 31 is reserved for generating an Error Doorbell interrupt. ** When bit 31 is set, an Error interrupt may be generated to the Intel XScale core. ** All other bits, when set, cause the Normal Messaging Unit interrupt line of the Intel XScale core to be asserted, ** when the interrupt is not masked by the Inbound Doorbell Interrupt Mask bit in the Inbound Interrupt Mask Register. ** The bits in the IDR register can only be set by an external PCI agent and can only be cleared by the Intel XScale core. ** ------------------------------------------------------------------------ ** Bit Default Description ** 31 0 2 Error Interrupt - Generate an Error Interrupt to the Intel XScale core. ** 30:00 00000000H Normal Interrupt - When any bit is set, generate a Normal interrupt to the Intel XScale core. ** When all bits are clear, do not generate a Normal Interrupt. ************************************************************************** */ #define ARCMSR_MU_INBOUND_DOORBELL_REG 0x20 /*dword 0x23,0x22,0x21,0x20*/ /* ************************************************************************** ** Inbound Interrupt Status Register - IISR ** ** . The Inbound Interrupt Status Register (IISR) contains hardware interrupt status. ** It records the status of Intel XScale core interrupts generated by the Message Registers, Doorbell Registers, and the Circular Queues. ** All interrupts are routed to the Normal Messaging Unit interrupt input of the Intel XScale core, ** except for the Error Doorbell Interrupt and the Outbound Free Queue Full interrupt; ** these two are routed to the Messaging Unit Error interrupt input. ** The generation of interrupts recorded in the Inbound Interrupt Status Register ** may be masked by setting the corresponding bit in the Inbound Interrupt Mask Register. ** Some of the bits in this register are Read Only. ** For those bits, the interrupt must be cleared through another register. ** ** Bit Default Description ** 31:07 0000000H 0 2 Reserved ** 06 0 2 Index Register Interrupt - This bit is set by the MU hardware ** when an Index Register has been written after a PCI transaction. ** 05 0 2 Outbound Free Queue Full Interrupt - This bit is set ** when the Outbound Free Head Pointer becomes equal to the Tail Pointer and the queue is full. ** An Error interrupt is generated for this condition. ** 04 0 2 Inbound Post Queue Interrupt - This bit is set by the MU hardware when the Inbound Post Queue has been written. ** Once cleared, an interrupt does NOT be generated ** when the head and tail pointers remain unequal (i.e. queue status is Not Empty). ** Therefore, when software leaves any unprocessed messages in the post queue when the interrupt is cleared, ** software must retain the information that the Inbound Post queue status is not empty. ** NOTE: This interrupt is provided with dedicated support in the 80331 Interrupt Controller. ** 03 0 2 Error Doorbell Interrupt - This bit is set when the Error Interrupt of the Inbound Doorbell Register is set. ** To clear this bit (and the interrupt), the Error Interrupt bit of the Inbound Doorbell Register must be clear. ** 02 0 2 Inbound Doorbell Interrupt - This bit is set when at least one ** Normal Interrupt bit in the Inbound Doorbell Register is set. ** To clear this bit (and the interrupt), the Normal Interrupt bits in the Inbound Doorbell Register must all be clear. ** 01 0 2 Inbound Message 1 Interrupt - This bit is set by the MU hardware when the Inbound Message 1 Register has been written. ** 00 0 2 Inbound Message 0 Interrupt - This bit is set by the MU hardware when the Inbound Message 0 Register has been written. ************************************************************************** */ #define ARCMSR_MU_INBOUND_INTERRUPT_STATUS_REG 0x24 /*dword 0x27,0x26,0x25,0x24*/ #define ARCMSR_MU_INBOUND_INDEX_INT 0x40 #define ARCMSR_MU_INBOUND_QUEUEFULL_INT 0x20 #define ARCMSR_MU_INBOUND_POSTQUEUE_INT 0x10 #define ARCMSR_MU_INBOUND_ERROR_DOORBELL_INT 0x08 #define ARCMSR_MU_INBOUND_DOORBELL_INT 0x04 #define ARCMSR_MU_INBOUND_MESSAGE1_INT 0x02 #define ARCMSR_MU_INBOUND_MESSAGE0_INT 0x01 /* ************************************************************************** ** Inbound Interrupt Mask Register - IIMR ** ** . The Inbound Interrupt Mask Register (IIMR) provides the ability to mask Intel XScale core interrupts generated by the Messaging Unit. ** Each bit in the Mask register corresponds to an interrupt bit in the Inbound Interrupt Status Register. ** Setting or clearing bits in this register does not affect the Inbound Interrupt Status Register. ** They only affect the generation of the Intel XScale core interrupt. ** ------------------------------------------------------------------------ ** Bit Default Description ** 31:07 000000H 0 2 Reserved ** 06 0 2 Index Register Interrupt Mask - When set, this bit masks the interrupt generated by the MU hardware ** when an Index Register has been written after a PCI transaction. ** 05 0 2 Outbound Free Queue Full Interrupt Mask - When set, this bit masks the Error interrupt generated ** when the Outbound Free Head Pointer becomes equal to the Tail Pointer and the queue is full. ** 04 0 2 Inbound Post Queue Interrupt Mask - When set, this bit masks the interrupt generated ** by the MU hardware when the Inbound Post Queue has been written. ** 03 0 2 Error Doorbell Interrupt Mask - When set, this bit masks the Error Interrupt ** when the Error Interrupt bit of the Inbound Doorbell Register is set. ** 02 0 2 Inbound Doorbell Interrupt Mask - When set, this bit masks the interrupt generated ** when at least one Normal Interrupt bit in the Inbound Doorbell Register is set. ** 01 0 2 Inbound Message 1 Interrupt Mask - When set, this bit masks the Inbound Message 1 ** Interrupt generated by a write to the Inbound Message 1 Register. ** 00 0 2 Inbound Message 0 Interrupt Mask - When set, ** this bit masks the Inbound Message 0 Interrupt generated by a write to the Inbound Message 0 Register. ************************************************************************** */ #define ARCMSR_MU_INBOUND_INTERRUPT_MASK_REG 0x28 /*dword 0x2B,0x2A,0x29,0x28*/ #define ARCMSR_MU_INBOUND_INDEX_INTMASKENABLE 0x40 #define ARCMSR_MU_INBOUND_QUEUEFULL_INTMASKENABLE 0x20 #define ARCMSR_MU_INBOUND_POSTQUEUE_INTMASKENABLE 0x10 #define ARCMSR_MU_INBOUND_DOORBELL_ERROR_INTMASKENABLE 0x08 #define ARCMSR_MU_INBOUND_DOORBELL_INTMASKENABLE 0x04 #define ARCMSR_MU_INBOUND_MESSAGE1_INTMASKENABLE 0x02 #define ARCMSR_MU_INBOUND_MESSAGE0_INTMASKENABLE 0x01 /* ************************************************************************** ** Outbound Doorbell Register - ODR ** ** The Outbound Doorbell Register (ODR) allows software interrupt generation. It allows the Intel ** XScale core to generate PCI interrupts to the host processor by writing to this register. The ** generation of PCI interrupts through the Outbound Doorbell Register may be masked by setting the ** Outbound Doorbell Interrupt Mask bit in the Outbound Interrupt Mask Register. ** The Software Interrupt bits in this register can only be set by the Intel XScale core and can only ** be cleared by an external PCI agent. ** ---------------------------------------------------------------------- ** Bit Default Description ** 31 0 2 Reserved ** 30 0 2 Reserved. ** 29 0 2 Reserved ** 28 0000 0000H PCI Interrupt - When set, this bit causes the P_INTC# interrupt output ** (P_INTA# with BRG_EN and ARB_EN straps low) ** signal to be asserted or a Message-signaled Interrupt is generated (when enabled). ** When this bit is cleared, the P_INTC# interrupt output ** (P_INTA# with BRG_EN and ARB_EN straps low) ** signal is deasserted. ** 27:00 000 0000H Software Interrupts - When any bit is set the P_INTC# interrupt output ** (P_INTA# with BRG_EN and ARB_EN straps low) ** signal is asserted or a Message-signaled Interrupt is generated (when enabled). ** When all bits are cleared, the P_INTC# interrupt output (P_INTA# with BRG_EN and ARB_EN straps low) ** signal is deasserted. ************************************************************************** */ #define ARCMSR_MU_OUTBOUND_DOORBELL_REG 0x2C /*dword 0x2F,0x2E,0x2D,0x2C*/ /* ************************************************************************** ** Outbound Interrupt Status Register - OISR ** ** The Outbound Interrupt Status Register (OISR) contains hardware interrupt status. It records the ** status of PCI interrupts generated by the Message Registers, Doorbell Registers, and the Circular ** Queues. The generation of PCI interrupts recorded in the Outbound Interrupt Status Register may ** be masked by setting the corresponding bit in the Outbound Interrupt Mask Register. Some of the ** bits in this register are Read Only. For those bits, the interrupt must be cleared through another ** register. ** ---------------------------------------------------------------------- ** Bit Default Description ** 31:05 000000H 000 2 Reserved ** 04 0 2 PCI Interrupt - This bit is set when the PCI Interrupt bit (bit 28) is set in the Outbound Doorbell Register. ** To clear this bit (and the interrupt), the PCI Interrupt bit must be cleared. ** 03 0 2 Outbound Post Queue Interrupt - This bit is set when data in the prefetch buffer is valid. This bit is ** cleared when any prefetch data has been read from the Outbound Queue Port. ** 02 0 2 Outbound Doorbell Interrupt - This bit is set when at least one Software Interrupt bit in the Outbound ** Doorbell Register is set. To clear this bit (and the interrupt), the Software Interrupt bits in the Outbound ** Doorbell Register must all be clear. ** 01 0 2 Outbound Message 1 Interrupt - This bit is set by the MU when the Outbound Message 1 Register is ** written. Clearing this bit clears the interrupt. ** 00 0 2 Outbound Message 0 Interrupt - This bit is set by the MU when the Outbound Message 0 Register is ** written. Clearing this bit clears the interrupt. ************************************************************************** */ #define ARCMSR_MU_OUTBOUND_INTERRUPT_STATUS_REG 0x30 /*dword 0x33,0x32,0x31,0x30*/ #define ARCMSR_MU_OUTBOUND_PCI_INT 0x10 #define ARCMSR_MU_OUTBOUND_POSTQUEUE_INT 0x08 #define ARCMSR_MU_OUTBOUND_DOORBELL_INT 0x04 #define ARCMSR_MU_OUTBOUND_MESSAGE1_INT 0x02 #define ARCMSR_MU_OUTBOUND_MESSAGE0_INT 0x01 /* ************************************************************************** ** Outbound Interrupt Mask Register - OIMR ** The Outbound Interrupt Mask Register (OIMR) provides the ability to mask outbound PCI ** interrupts generated by the Messaging Unit. Each bit in the mask register corresponds to a ** hardware interrupt bit in the Outbound Interrupt Status Register. When the bit is set, the PCI ** interrupt is not generated. When the bit is clear, the interrupt is allowed to be generated. ** Setting or clearing bits in this register does not affect the Outbound Interrupt Status Register. They ** only affect the generation of the PCI interrupt. ** ---------------------------------------------------------------------- ** Bit Default Description ** 31:05 000000H Reserved ** 04 0 2 PCI Interrupt Mask - When set, this bit masks the interrupt generation when the PCI Interrupt bit (bit 28) ** in the Outbound Doorbell Register is set. ** 03 0 2 Outbound Post Queue Interrupt Mask - When set, this bit masks the interrupt generated when data in ** the prefetch buffer is valid. ** 02 0 2 Outbound Doorbell Interrupt Mask - When set, this bit masks the interrupt generated by the Outbound ** Doorbell Register. ** 01 0 2 Outbound Message 1 Interrupt Mask - When set, this bit masks the Outbound Message 1 Interrupt ** generated by a write to the Outbound Message 1 Register. ** 00 0 2 Outbound Message 0 Interrupt Mask- When set, this bit masks the Outbound Message 0 Interrupt ** generated by a write to the Outbound Message 0 Register. ************************************************************************** */ #define ARCMSR_MU_OUTBOUND_INTERRUPT_MASK_REG 0x34 /*dword 0x37,0x36,0x35,0x34*/ #define ARCMSR_MU_OUTBOUND_PCI_INTMASKENABLE 0x10 #define ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE 0x08 #define ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE 0x04 #define ARCMSR_MU_OUTBOUND_MESSAGE1_INTMASKENABLE 0x02 #define ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE 0x01 #define ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE 0x1F /* ************************************************************************** ** ************************************************************************** */ #define ARCMSR_MU_INBOUND_QUEUE_PORT_REG 0x40 /*dword 0x43,0x42,0x41,0x40*/ #define ARCMSR_MU_OUTBOUND_QUEUE_PORT_REG 0x44 /*dword 0x47,0x46,0x45,0x44*/ /* ************************************************************************** ** Circular Queues ** ====================================================================== ** The MU implements four circular queues. There are 2 inbound queues and 2 outbound queues. In ** this case, inbound and outbound refer to the direction of the flow of posted messages. ** Inbound messages are either: ** ĦE posted messages by other processors for the Intel XScale core to process or ** ĦE free (or empty) messages that can be reused by other processors. ** Outbound messages are either: ** ĦE posted messages by the Intel XScale core for other processors to process or ** ĦE free (or empty) messages that can be reused by the Intel XScale core. ** Therefore, free inbound messages flow away from the 80331 and free outbound messages flow toward the 80331. ** The four Circular Queues are used to pass messages in the following manner. ** . The two inbound queues are used to handle inbound messages ** and the two outbound queues are used to handle outbound messages. ** . One of the inbound queues is designated the Free queue and it contains inbound free messages. ** The other inbound queue is designated the Post queue and it contains inbound posted messages. ** Similarly, one of the outbound queues is designated the Free queue and the other outbound queue is designated the Post queue. ** ** ============================================================================================================= ** Circular Queue Summary ** _____________________________________________________________________________________________________________ ** | Queue Name | Purpose | Action on PCI Interface| ** |______________________|____________________________________________________________|_________________________| ** |Inbound Post Queue | Queue for inbound messages from other processors | Written | ** | | waiting to be processed by the 80331 | | ** |Inbound Free Queue | Queue for empty inbound messages from the 80331 | Read | ** | | available for use by other processors | | ** |Outbound Post Queue | Queue for outbound messages from the 80331 | Read | ** | | that are being posted to the other processors | | ** |Outbound Free Queue | Queue for empty outbound messages from other processors | Written | ** | | available for use by the 80331 | | ** |______________________|____________________________________________________________|_________________________| ** ** . The two inbound queues allow the host processor to post inbound messages for the 80331 in one ** queue and to receive free messages returning from the 80331. ** The host processor posts inbound messages, ** the Intel XScale core receives the posted message and when it is finished with the message, ** places it back on the inbound free queue for reuse by the host processor. ** ** The circular queues are accessed by external PCI agents through two port locations in the PCI ** address space: ** Inbound Queue Port ** and Outbound Queue Port. ** The Inbound Queue Port is used by external PCI agents to read the Inbound Free Queue and write the Inbound Post Queue. ** The Outbound Queue Port is used by external PCI agents to read the Outbound Post Queue and write the Outbound Free Queue. ** Note that a PCI transaction to the inbound or outbound queue ports with null byte enables (P_C/BE[3:0]#=1111 2 ) ** does not cause the MU hardware to increment the queue pointers. ** This is treated as when the PCI transaction did not occur. ** The Inbound and Outbound Queue Ports never respond with P_ACK64# on the PCI interface. ** ====================================================================================== ** Overview of Circular Queue Operation ** ====================================================================================== ** . The data storage for the circular queues must be provided by the 80331 local memory. ** . The base address of the circular queues is contained in the Queue Base Address Register. ** Each entry in the queue is a 32-bit data value. ** . Each read from or write to the queue may access only one queue entry. ** . Multi-DWORD accesses to the circular queues are not allowed. ** Sub-DWORD accesses are promoted to DWORD accesses. ** . Each circular queue has a head pointer and a tail pointer. ** The pointers are offsets from the Queue Base Address. ** . Writes to a queue occur at the head of the queue and reads occur from the tail. ** The head and tail pointers are incremented by either the Intel XScale core or the Messaging Unit hardware. ** Which unit maintains the pointer is determined by the writer of the queue. ** More details about the pointers are given in the queue descriptions below. ** The pointers are incremented after the queue access. ** Both pointers wrap around to the first address of the circular queue when they reach the circular queue size. ** ** Messaging Unit... ** ** The Messaging Unit generates an interrupt to the Intel XScale core or generate a PCI interrupt under certain conditions. ** . In general, when a Post queue is written, an interrupt is generated to notify the receiver that a message was posted. ** The size of each circular queue can range from 4K entries (16 Kbytes) to 64K entries (256 Kbytes). ** . All four queues must be the same size and may be contiguous. ** Therefore, the total amount of local memory needed by the circular queues ranges from 64 Kbytes to 1 Mbytes. ** The Queue size is determined by the Queue Size field in the MU Configuration Register. ** . There is one base address for all four queues. ** It is stored in the Queue Base Address Register (QBAR). ** The starting addresses of each queue is based on the Queue Base Address and the Queue Size field. ** here shows an example of how the circular queues should be set up based on the ** Intelligent I/O (I 2 O) Architecture Specification. ** Other ordering of the circular queues is possible. ** ** Queue Starting Address ** Inbound Free Queue QBAR ** Inbound Post Queue QBAR + Queue Size ** Outbound Post Queue QBAR + 2 * Queue Size ** Outbound Free Queue QBAR + 3 * Queue Size ** =================================================================================== ** Inbound Post Queue ** ------------------ ** The Inbound Post Queue holds posted messages placed there by other processors for the Intel XScale core to process. ** This queue is read from the queue tail by the Intel XScale core. It is written to the queue head by external PCI agents. ** The tail pointer is maintained by the Intel XScale core. The head pointer is maintained by the MU hardware. ** For a PCI write transaction that accesses the Inbound Queue Port, ** the MU writes the data to the local memory location address in the Inbound Post Head Pointer Register. ** When the data written to the Inbound Queue Port is written to local memory, the MU hardware increments the Inbound Post Head Pointer Register. ** An Intel XScale core interrupt may be generated when the Inbound Post Queue is written. ** The Inbound Post Queue Interrupt bit in the Inbound Interrupt Status Register indicates the interrupt status. ** The interrupt is cleared when the Inbound Post Queue Interrupt bit is cleared. ** The interrupt can be masked by the Inbound Interrupt Mask Register. ** Software must be aware of the state of the Inbound Post Queue Interrupt Mask bit to guarantee ** that the full condition is recognized by the core processor. ** In addition, to guarantee that the queue does not get overwritten, ** software must process messages from the tail of the queue before incrementing the tail pointer and clearing this interrupt. ** Once cleared, an interrupt is NOT generated when the head and tail pointers remain unequal (i.e. queue status is Not Empty). ** Only a new message posting the in the inbound queue generates a new interrupt. ** Therefore, when software leaves any unprocessed messages in the post queue when the interrupt is cleared, ** software must retain the information that the Inbound Post queue status. ** From the time that the PCI write transaction is received until the data is written ** in local memory and the Inbound Post Head Pointer Register is incremented, ** any PCI transaction that attempts to access the Inbound Post Queue Port is signalled a Retry. ** The Intel XScale core may read messages from the Inbound Post Queue ** by reading the data from the local memory location pointed to by the Inbound Post Tail Pointer Register. ** The Intel XScale core must then increment the Inbound Post Tail Pointer Register. ** When the Inbound Post Queue is full (head and tail pointers are equal and the head pointer was last updated by hardware), ** the hardware retries any PCI writes until a slot in the queue becomes available. ** A slot in the post queue becomes available by the Intel XScale core incrementing the tail pointer. ** =================================================================================== ** Inbound Free Queue ** ------------------ ** The Inbound Free Queue holds free inbound messages placed there by the Intel XScale core for other processors to use. ** This queue is read from the queue tail by external PCI agents. ** It is written to the queue head by the Intel XScale core. ** The tail pointer is maintained by the MU hardware. ** The head pointer is maintained by the Intel XScale core. ** For a PCI read transaction that accesses the Inbound Queue Port, ** the MU attempts to read the data at the local memory address in the Inbound Free Tail Pointer. ** When the queue is not empty (head and tail pointers are not equal) ** or full (head and tail pointers are equal but the head pointer was last written by software), the data is returned. ** When the queue is empty (head and tail pointers are equal and the head pointer was last updated by hardware), ** the value of -1 (FFFF.FFFFH) is returned. ** When the queue was not empty and the MU succeeded in returning the data at the tail, ** the MU hardware must increment the value in the Inbound Free Tail Pointer Register. ** To reduce latency for the PCI read access, the MU implements a prefetch mechanism to anticipate accesses to the Inbound Free Queue. ** The MU hardware prefetches the data at the tail of the Inbound Free Queue and load it into an internal prefetch register. ** When the PCI read access occurs, the data is read directly from the prefetch register. ** The prefetch mechanism loads a value of -1 (FFFF.FFFFH) into the prefetch register ** when the head and tail pointers are equal and the queue is empty. ** In order to update the prefetch register when messages are added to the queue and it becomes non-empty, ** the prefetch mechanism automatically starts a prefetch when the prefetch register contains FFFF.FFFFH ** and the Inbound Free Head Pointer Register is written. ** The Intel XScale core needs to update the Inbound Free Head Pointer Register when it adds messages to the queue. ** A prefetch must appear atomic from the perspective of the external PCI agent. ** When a prefetch is started, any PCI transaction that attempts to access the Inbound Free Queue is signalled a Retry until the prefetch is completed. ** The Intel XScale core may place messages in the Inbound Free Queue by writing the data to the ** local memory location pointed to by the Inbound Free Head Pointer Register. ** The processor must then increment the Inbound Free Head Pointer Register. ** ================================================================================== ** Outbound Post Queue ** ------------------- ** The Outbound Post Queue holds outbound posted messages placed there by the Intel XScale ** core for other processors to process. This queue is read from the queue tail by external PCI agents. ** It is written to the queue head by the Intel XScale core. The tail pointer is maintained by the ** MU hardware. The head pointer is maintained by the Intel XScale core. ** For a PCI read transaction that accesses the Outbound Queue Port, the MU attempts to read the ** data at the local memory address in the Outbound Post Tail Pointer Register. When the queue is not ** empty (head and tail pointers are not equal) or full (head and tail pointers are equal but the head ** pointer was last written by software), the data is returned. When the queue is empty (head and tail ** pointers are equal and the head pointer was last updated by hardware), the value of -1 ** (FFFF.FFFFH) is returned. When the queue was not empty and the MU succeeded in returning the ** data at the tail, the MU hardware must increment the value in the Outbound Post Tail Pointer ** Register. ** To reduce latency for the PCI read access, the MU implements a prefetch mechanism to anticipate ** accesses to the Outbound Post Queue. The MU hardware prefetches the data at the tail of the ** Outbound Post Queue and load it into an internal prefetch register. When the PCI read access ** occurs, the data is read directly from the prefetch register. ** The prefetch mechanism loads a value of -1 (FFFF.FFFFH) into the prefetch register when the head ** and tail pointers are equal and the queue is empty. In order to update the prefetch register when ** messages are added to the queue and it becomes non-empty, the prefetch mechanism automatically ** starts a prefetch when the prefetch register contains FFFF.FFFFH and the Outbound Post Head ** Pointer Register is written. The Intel XScale core needs to update the Outbound Post Head ** Pointer Register when it adds messages to the queue. ** A prefetch must appear atomic from the perspective of the external PCI agent. When a prefetch is ** started, any PCI transaction that attempts to access the Outbound Post Queue is signalled a Retry ** until the prefetch is completed. ** A PCI interrupt may be generated when data in the prefetch buffer is valid. When the prefetch ** queue is clear, no interrupt is generated. The Outbound Post Queue Interrupt bit in the Outbound ** Interrupt Status Register shall indicate the status of the prefetch buffer data and therefore the ** interrupt status. The interrupt is cleared when any prefetched data has been read from the Outbound ** Queue Port. The interrupt can be masked by the Outbound Interrupt Mask Register. ** The Intel XScale core may place messages in the Outbound Post Queue by writing the data to ** the local memory address in the Outbound Post Head Pointer Register. The processor must then ** increment the Outbound Post Head Pointer Register. ** ================================================== ** Outbound Free Queue ** ----------------------- ** The Outbound Free Queue holds free messages placed there by other processors for the Intel ** XScale core to use. This queue is read from the queue tail by the Intel XScale core. It is ** written to the queue head by external PCI agents. The tail pointer is maintained by the Intel ** XScale core. The head pointer is maintained by the MU hardware. ** For a PCI write transaction that accesses the Outbound Queue Port, the MU writes the data to the ** local memory address in the Outbound Free Head Pointer Register. When the data written to the ** Outbound Queue Port is written to local memory, the MU hardware increments the Outbound Free ** Head Pointer Register. ** When the head pointer and the tail pointer become equal and the queue is full, the MU may signal ** an interrupt to the Intel XScale core to register the queue full condition. This interrupt is ** recorded in the Inbound Interrupt Status Register. The interrupt is cleared when the Outbound Free ** Queue Full Interrupt bit is cleared and not by writing to the head or tail pointers. The interrupt can ** be masked by the Inbound Interrupt Mask Register. Software must be aware of the state of the ** Outbound Free Queue Interrupt Mask bit to guarantee that the full condition is recognized by the ** core processor. ** From the time that a PCI write transaction is received until the data is written in local memory and ** the Outbound Free Head Pointer Register is incremented, any PCI transaction that attempts to ** access the Outbound Free Queue Port is signalled a retry. ** The Intel XScale core may read messages from the Outbound Free Queue by reading the data ** from the local memory address in the Outbound Free Tail Pointer Register. The processor must ** then increment the Outbound Free Tail Pointer Register. When the Outbound Free Queue is full, ** the hardware must retry any PCI writes until a slot in the queue becomes available. ** ** ================================================================================== ** Circular Queue Summary ** ---------------------- ** ________________________________________________________________________________________________________________________________________________ ** | Queue Name | PCI Port |Generate PCI Interrupt |Generate Intel Xscale Core Interrupt|Head Pointer maintained by|Tail Pointer maintained by| ** |_____________|_______________|_______________________|____________________________________|__________________________|__________________________| ** |Inbound Post | Inbound Queue | | | | | ** | Queue | Port | NO | Yes, when queue is written | MU hardware | Intel XScale | ** |_____________|_______________|_______________________|____________________________________|__________________________|__________________________| ** |Inbound Free | Inbound Queue | | | | | ** | Queue | Port | NO | NO | Intel XScale | MU hardware | ** |_____________|_______________|_______________________|____________________________________|__________________________|__________________________| ** ================================================================================== ** Circular Queue Status Summary ** ---------------------- ** ____________________________________________________________________________________________________ ** | Queue Name | Queue Status | Head & Tail Pointer | Last Pointer Update | ** |_____________________|________________|_____________________|_______________________________________| ** | Inbound Post Queue | Empty | Equal | Tail pointer last updated by software | ** |_____________________|________________|_____________________|_______________________________________| ** | Inbound Free Queue | Empty | Equal | Head pointer last updated by hardware | ** |_____________________|________________|_____________________|_______________________________________| ************************************************************************** */ /* ************************************************************************** ** Index Registers ** ======================== ** . The Index Registers are a set of 1004 registers that when written by an external PCI agent can generate an interrupt to the Intel XScale core. ** These registers are for inbound messages only. ** The interrupt is recorded in the Inbound Interrupt Status Register. ** The storage for the Index Registers is allocated from the 80331 local memory. ** PCI write accesses to the Index Registers write the data to local memory. ** PCI read accesses to the Index Registers read the data from local memory. ** . The local memory used for the Index Registers ranges from Inbound ATU Translate Value Register + 050H ** to Inbound ATU Translate Value Register + FFFH. ** . The address of the first write access is stored in the Index Address Register. ** This register is written during the earliest write access and provides a means to determine which Index Register was written. ** Once updated by the MU, the Index Address Register is not updated until the Index Register ** Interrupt bit in the Inbound Interrupt Status Register is cleared. ** . When the interrupt is cleared, the Index Address Register is re-enabled and stores the address of the next Index Register write access. ** Writes by the Intel XScale core to the local memory used by the Index Registers ** does not cause an interrupt and does not update the Index Address Register. ** . The index registers can be accessed with Multi-DWORD reads and single QWORD aligned writes. ************************************************************************** */ /* ************************************************************************** ** Messaging Unit Internal Bus Memory Map ** ======================================= ** Internal Bus Address___Register Description (Name)____________________|_PCI Configuration Space Register Number_ ** FFFF E300H reserved | ** .. .. | ** FFFF E30CH reserved | ** FFFF E310H Inbound Message Register 0 | Available through ** FFFF E314H Inbound Message Register 1 | ATU Inbound Translation Window ** FFFF E318H Outbound Message Register 0 | ** FFFF E31CH Outbound Message Register 1 | or ** FFFF E320H Inbound Doorbell Register | ** FFFF E324H Inbound Interrupt Status Register | must translate PCI address to ** FFFF E328H Inbound Interrupt Mask Register | the Intel Xscale Core ** FFFF E32CH Outbound Doorbell Register | Memory-Mapped Address ** FFFF E330H Outbound Interrupt Status Register | ** FFFF E334H Outbound Interrupt Mask Register | ** ______________________________________________________________________|________________________________________ ** FFFF E338H reserved | ** FFFF E33CH reserved | ** FFFF E340H reserved | ** FFFF E344H reserved | ** FFFF E348H reserved | ** FFFF E34CH reserved | ** FFFF E350H MU Configuration Register | ** FFFF E354H Queue Base Address Register | ** FFFF E358H reserved | ** FFFF E35CH reserved | must translate PCI address to ** FFFF E360H Inbound Free Head Pointer Register | the Intel Xscale Core ** FFFF E364H Inbound Free Tail Pointer Register | Memory-Mapped Address ** FFFF E368H Inbound Post Head pointer Register | ** FFFF E36CH Inbound Post Tail Pointer Register | ** FFFF E370H Outbound Free Head Pointer Register | ** FFFF E374H Outbound Free Tail Pointer Register | ** FFFF E378H Outbound Post Head pointer Register | ** FFFF E37CH Outbound Post Tail Pointer Register | ** FFFF E380H Index Address Register | ** FFFF E384H reserved | ** .. .. | ** FFFF E3FCH reserved | ** ______________________________________________________________________|_______________________________________ ************************************************************************** */ /* ************************************************************************** ** MU Configuration Register - MUCR FFFF.E350H ** ** . The MU Configuration Register (MUCR) contains the Circular Queue Enable bit and the size of one Circular Queue. ** . The Circular Queue Enable bit enables or disables the Circular Queues. ** The Circular Queues are disabled at reset to allow the software to initialize the head ** and tail pointer registers before any PCI accesses to the Queue Ports. ** . Each Circular Queue may range from 4 K entries (16 Kbytes) to 64 K entries (256 Kbytes) and there are four Circular Queues. ** ------------------------------------------------------------------------ ** Bit Default Description ** 31:06 000000H 00 2 Reserved ** 05:01 00001 2 Circular Queue Size - This field determines the size of each Circular Queue. ** All four queues are the same size. ** ĦE 00001 2 - 4K Entries (16 Kbytes) ** ĦE 00010 2 - 8K Entries (32 Kbytes) ** ĦE 00100 2 - 16K Entries (64 Kbytes) ** ĦE 01000 2 - 32K Entries (128 Kbytes) ** ĦE 10000 2 - 64K Entries (256 Kbytes) ** 00 0 2 Circular Queue Enable - This bit enables or disables the Circular Queues. When clear the Circular ** Queues are disabled, however the MU accepts PCI accesses to the Circular Queue Ports but ignores ** the data for Writes and return FFFF.FFFFH for Reads. Interrupts are not generated to the core when ** disabled. When set, the Circular Queues are fully enabled. ************************************************************************** */ #define ARCMSR_MU_CONFIGURATION_REG 0xFFFFE350 #define ARCMSR_MU_CIRCULAR_QUEUE_SIZE64K 0x0020 #define ARCMSR_MU_CIRCULAR_QUEUE_SIZE32K 0x0010 #define ARCMSR_MU_CIRCULAR_QUEUE_SIZE16K 0x0008 #define ARCMSR_MU_CIRCULAR_QUEUE_SIZE8K 0x0004 #define ARCMSR_MU_CIRCULAR_QUEUE_SIZE4K 0x0002 #define ARCMSR_MU_CIRCULAR_QUEUE_ENABLE 0x0001 /*0:disable 1:enable*/ /* ************************************************************************** ** Queue Base Address Register - QBAR ** ** . The Queue Base Address Register (QBAR) contains the local memory address of the Circular Queues. ** The base address is required to be located on a 1 Mbyte address boundary. ** . All Circular Queue head and tail pointers are based on the QBAR. ** When the head and tail pointer registers are read, the Queue Base Address is returned in the upper 12 bits. ** Writing to the upper 12 bits of the head and tail pointer registers does not affect the Queue Base Address or Queue Base Address Register. ** Warning: ** The QBAR must designate a range allocated to the 80331 DDR SDRAM interface ** ------------------------------------------------------------------------ ** Bit Default Description ** 31:20 000H Queue Base Address - Local memory address of the circular queues. ** 19:00 00000H Reserved ************************************************************************** */ #define ARCMSR_MU_QUEUE_BASE_ADDRESS_REG 0xFFFFE354 /* ************************************************************************** ** Inbound Free Head Pointer Register - IFHPR ** ** . The Inbound Free Head Pointer Register (IFHPR) contains the local memory offset from ** the Queue Base Address of the head pointer for the Inbound Free Queue. ** The Head Pointer must be aligned on a DWORD address boundary. ** When read, the Queue Base Address is provided in the upper 12 bits of the register. ** Writes to the upper 12 bits of the register are ignored. ** This register is maintained by software. ** ------------------------------------------------------------------------ ** Bit Default Description ** 31:20 000H Queue Base Address - Local memory address of the circular queues. ** 19:02 0000H 00 2 Inbound Free Head Pointer - Local memory offset of the head pointer for the Inbound Free Queue. ** 01:00 00 2 Reserved ************************************************************************** */ #define ARCMSR_MU_INBOUND_FREE_HEAD_PTR_REG 0xFFFFE360 /* ************************************************************************** ** Inbound Free Tail Pointer Register - IFTPR ** ** . The Inbound Free Tail Pointer Register (IFTPR) contains the local memory offset from the Queue ** Base Address of the tail pointer for the Inbound Free Queue. The Tail Pointer must be aligned on a ** DWORD address boundary. When read, the Queue Base Address is provided in the upper 12 bits ** of the register. Writes to the upper 12 bits of the register are ignored. ** ------------------------------------------------------------------------ ** Bit Default Description ** 31:20 000H Queue Base Address - Local memory address of the circular queues. ** 19:02 0000H 00 2 Inbound Free Tail Pointer - Local memory offset of the tail pointer for the Inbound Free Queue. ** 01:00 00 2 Reserved ************************************************************************** */ #define ARCMSR_MU_INBOUND_FREE_TAIL_PTR_REG 0xFFFFE364 /* ************************************************************************** ** Inbound Post Head Pointer Register - IPHPR ** ** . The Inbound Post Head Pointer Register (IPHPR) contains the local memory offset from the Queue ** Base Address of the head pointer for the Inbound Post Queue. The Head Pointer must be aligned on ** a DWORD address boundary. When read, the Queue Base Address is provided in the upper 12 bits ** of the register. Writes to the upper 12 bits of the register are ignored. ** ------------------------------------------------------------------------ ** Bit Default Description ** 31:20 000H Queue Base Address - Local memory address of the circular queues. ** 19:02 0000H 00 2 Inbound Post Head Pointer - Local memory offset of the head pointer for the Inbound Post Queue. ** 01:00 00 2 Reserved ************************************************************************** */ #define ARCMSR_MU_INBOUND_POST_HEAD_PTR_REG 0xFFFFE368 /* ************************************************************************** ** Inbound Post Tail Pointer Register - IPTPR ** ** . The Inbound Post Tail Pointer Register (IPTPR) contains the local memory offset from the Queue ** Base Address of the tail pointer for the Inbound Post Queue. The Tail Pointer must be aligned on a ** DWORD address boundary. When read, the Queue Base Address is provided in the upper 12 bits ** of the register. Writes to the upper 12 bits of the register are ignored. ** ------------------------------------------------------------------------ ** Bit Default Description ** 31:20 000H Queue Base Address - Local memory address of the circular queues. ** 19:02 0000H 00 2 Inbound Post Tail Pointer - Local memory offset of the tail pointer for the Inbound Post Queue. ** 01:00 00 2 Reserved ************************************************************************** */ #define ARCMSR_MU_INBOUND_POST_TAIL_PTR_REG 0xFFFFE36C /* ************************************************************************** ** Index Address Register - IAR ** ** . The Index Address Register (IAR) contains the offset of the least recently accessed Index Register. ** It is written by the MU when the Index Registers are written by a PCI agent. ** The register is not updated until the Index Interrupt bit in the Inbound Interrupt Status Register is cleared. ** . The local memory address of the Index Register least recently accessed is computed ** by adding the Index Address Register to the Inbound ATU Translate Value Register. ** ------------------------------------------------------------------------ ** Bit Default Description ** 31:12 000000H Reserved ** 11:02 00H 00 2 Index Address - is the local memory offset of the Index Register written (050H to FFCH) ** 01:00 00 2 Reserved ************************************************************************** */ #define ARCMSR_MU_LOCAL_MEMORY_INDEX_REG 0xFFFFE380 /*1004 dwords 0x0050....0x0FFC, 4016 bytes 0x0050...0x0FFF*/ /* ********************************************************************************************************** ** RS-232 Interface for Areca Raid Controller ** The low level command interface is exclusive with VT100 terminal ** -------------------------------------------------------------------- ** 1. Sequence of command execution ** -------------------------------------------------------------------- ** (A) Header : 3 bytes sequence (0x5E, 0x01, 0x61) ** (B) Command block : variable length of data including length, command code, data and checksum byte ** (C) Return data : variable length of data ** -------------------------------------------------------------------- ** 2. Command block ** -------------------------------------------------------------------- ** (A) 1st byte : command block length (low byte) ** (B) 2nd byte : command block length (high byte) ** note ..command block length shouldn't > 2040 bytes, length excludes these two bytes ** (C) 3rd byte : command code ** (D) 4th and following bytes : variable length data bytes depends on command code ** (E) last byte : checksum byte (sum of 1st byte until last data byte) ** -------------------------------------------------------------------- ** 3. Command code and associated data ** -------------------------------------------------------------------- ** The following are command code defined in raid controller Command code 0x10--0x1? are used for system level management, ** no password checking is needed and should be implemented in separate well controlled utility and not for end user access. ** Command code 0x20--0x?? always check the password, password must be entered to enable these command. ** enum ** { ** GUI_SET_SERIAL=0x10, ** GUI_SET_VENDOR, ** GUI_SET_MODEL, ** GUI_IDENTIFY, ** GUI_CHECK_PASSWORD, ** GUI_LOGOUT, ** GUI_HTTP, ** GUI_SET_ETHERNET_ADDR, ** GUI_SET_LOGO, ** GUI_POLL_EVENT, ** GUI_GET_EVENT, ** GUI_GET_HW_MONITOR, ** ** // GUI_QUICK_CREATE=0x20, (function removed) ** GUI_GET_INFO_R=0x20, ** GUI_GET_INFO_V, ** GUI_GET_INFO_P, ** GUI_GET_INFO_S, ** GUI_CLEAR_EVENT, ** ** GUI_MUTE_BEEPER=0x30, ** GUI_BEEPER_SETTING, ** GUI_SET_PASSWORD, ** GUI_HOST_INTERFACE_MODE, ** GUI_REBUILD_PRIORITY, ** GUI_MAX_ATA_MODE, ** GUI_RESET_CONTROLLER, ** GUI_COM_PORT_SETTING, ** GUI_NO_OPERATION, ** GUI_DHCP_IP, ** ** GUI_CREATE_PASS_THROUGH=0x40, ** GUI_MODIFY_PASS_THROUGH, ** GUI_DELETE_PASS_THROUGH, ** GUI_IDENTIFY_DEVICE, ** ** GUI_CREATE_RAIDSET=0x50, ** GUI_DELETE_RAIDSET, ** GUI_EXPAND_RAIDSET, ** GUI_ACTIVATE_RAIDSET, ** GUI_CREATE_HOT_SPARE, ** GUI_DELETE_HOT_SPARE, ** ** GUI_CREATE_VOLUME=0x60, ** GUI_MODIFY_VOLUME, ** GUI_DELETE_VOLUME, ** GUI_START_CHECK_VOLUME, ** GUI_STOP_CHECK_VOLUME ** }; ** ** Command description : ** ** GUI_SET_SERIAL : Set the controller serial# ** byte 0,1 : length ** byte 2 : command code 0x10 ** byte 3 : password length (should be 0x0f) ** byte 4-0x13 : should be "ArEcATecHnoLogY" ** byte 0x14--0x23 : Serial number string (must be 16 bytes) ** GUI_SET_VENDOR : Set vendor string for the controller ** byte 0,1 : length ** byte 2 : command code 0x11 ** byte 3 : password length (should be 0x08) ** byte 4-0x13 : should be "ArEcAvAr" ** byte 0x14--0x3B : vendor string (must be 40 bytes) ** GUI_SET_MODEL : Set the model name of the controller ** byte 0,1 : length ** byte 2 : command code 0x12 ** byte 3 : password length (should be 0x08) ** byte 4-0x13 : should be "ArEcAvAr" ** byte 0x14--0x1B : model string (must be 8 bytes) ** GUI_IDENTIFY : Identify device ** byte 0,1 : length ** byte 2 : command code 0x13 ** return "Areca RAID Subsystem " ** GUI_CHECK_PASSWORD : Verify password ** byte 0,1 : length ** byte 2 : command code 0x14 ** byte 3 : password length ** byte 4-0x?? : user password to be checked ** GUI_LOGOUT : Logout GUI (force password checking on next command) ** byte 0,1 : length ** byte 2 : command code 0x15 ** GUI_HTTP : HTTP interface (reserved for Http proxy service)(0x16) ** ** GUI_SET_ETHERNET_ADDR : Set the ethernet MAC address ** byte 0,1 : length ** byte 2 : command code 0x17 ** byte 3 : password length (should be 0x08) ** byte 4-0x13 : should be "ArEcAvAr" ** byte 0x14--0x19 : Ethernet MAC address (must be 6 bytes) ** GUI_SET_LOGO : Set logo in HTTP ** byte 0,1 : length ** byte 2 : command code 0x18 ** byte 3 : Page# (0/1/2/3) (0xff --> clear OEM logo) ** byte 4/5/6/7 : 0x55/0xaa/0xa5/0x5a ** byte 8 : TITLE.JPG data (each page must be 2000 bytes) ** note .... page0 1st 2 byte must be actual length of the JPG file ** GUI_POLL_EVENT : Poll If Event Log Changed ** byte 0,1 : length ** byte 2 : command code 0x19 ** GUI_GET_EVENT : Read Event ** byte 0,1 : length ** byte 2 : command code 0x1a ** byte 3 : Event Page (0:1st page/1/2/3:last page) ** GUI_GET_HW_MONITOR : Get HW monitor data ** byte 0,1 : length ** byte 2 : command code 0x1b ** byte 3 : # of FANs(example 2) ** byte 4 : # of Voltage sensor(example 3) ** byte 5 : # of temperature sensor(example 2) ** byte 6 : # of power ** byte 7/8 : Fan#0 (RPM) ** byte 9/10 : Fan#1 ** byte 11/12 : Voltage#0 original value in *1000 ** byte 13/14 : Voltage#0 value ** byte 15/16 : Voltage#1 org ** byte 17/18 : Voltage#1 ** byte 19/20 : Voltage#2 org ** byte 21/22 : Voltage#2 ** byte 23 : Temp#0 ** byte 24 : Temp#1 ** byte 25 : Power indicator (bit0 : power#0, bit1 : power#1) ** byte 26 : UPS indicator ** GUI_QUICK_CREATE : Quick create raid/volume set ** byte 0,1 : length ** byte 2 : command code 0x20 ** byte 3/4/5/6 : raw capacity ** byte 7 : raid level ** byte 8 : stripe size ** byte 9 : spare ** byte 10/11/12/13: device mask (the devices to create raid/volume) ** This function is removed, application like to implement quick create function ** need to use GUI_CREATE_RAIDSET and GUI_CREATE_VOLUMESET function. ** GUI_GET_INFO_R : Get Raid Set Information ** byte 0,1 : length ** byte 2 : command code 0x20 ** byte 3 : raidset# ** ** typedef struct sGUI_RAIDSET ** { ** BYTE grsRaidSetName[16]; ** DWORD grsCapacity; ** DWORD grsCapacityX; ** DWORD grsFailMask; ** BYTE grsDevArray[32]; ** BYTE grsMemberDevices; ** BYTE grsNewMemberDevices; ** BYTE grsRaidState; ** BYTE grsVolumes; ** BYTE grsVolumeList[16]; ** BYTE grsRes1; ** BYTE grsRes2; ** BYTE grsRes3; ** BYTE grsFreeSegments; ** DWORD grsRawStripes[8]; ** DWORD grsRes4; ** DWORD grsRes5; // Total to 128 bytes ** DWORD grsRes6; // Total to 128 bytes ** } sGUI_RAIDSET, *pGUI_RAIDSET; ** GUI_GET_INFO_V : Get Volume Set Information ** byte 0,1 : length ** byte 2 : command code 0x21 ** byte 3 : volumeset# ** ** typedef struct sGUI_VOLUMESET ** { ** BYTE gvsVolumeName[16]; // 16 ** DWORD gvsCapacity; ** DWORD gvsCapacityX; ** DWORD gvsFailMask; ** DWORD gvsStripeSize; ** DWORD gvsNewFailMask; ** DWORD gvsNewStripeSize; ** DWORD gvsVolumeStatus; ** DWORD gvsProgress; // 32 ** sSCSI_ATTR gvsScsi; ** BYTE gvsMemberDisks; ** BYTE gvsRaidLevel; // 8 ** ** BYTE gvsNewMemberDisks; ** BYTE gvsNewRaidLevel; ** BYTE gvsRaidSetNumber; ** BYTE gvsRes0; // 4 ** BYTE gvsRes1[4]; // 64 bytes ** } sGUI_VOLUMESET, *pGUI_VOLUMESET; ** ** GUI_GET_INFO_P : Get Physical Drive Information ** byte 0,1 : length ** byte 2 : command code 0x22 ** byte 3 : drive # (from 0 to max-channels - 1) ** ** typedef struct sGUI_PHY_DRV ** { ** BYTE gpdModelName[40]; ** BYTE gpdSerialNumber[20]; ** BYTE gpdFirmRev[8]; ** DWORD gpdCapacity; ** DWORD gpdCapacityX; // Reserved for expansion ** BYTE gpdDeviceState; ** BYTE gpdPioMode; ** BYTE gpdCurrentUdmaMode; ** BYTE gpdUdmaMode; ** BYTE gpdDriveSelect; ** BYTE gpdRaidNumber; // 0xff if not belongs to a raid set ** sSCSI_ATTR gpdScsi; ** BYTE gpdReserved[40]; // Total to 128 bytes ** } sGUI_PHY_DRV, *pGUI_PHY_DRV; ** ** GUI_GET_INFO_S : Get System Information ** byte 0,1 : length ** byte 2 : command code 0x23 ** ** typedef struct sCOM_ATTR ** { ** BYTE comBaudRate; ** BYTE comDataBits; ** BYTE comStopBits; ** BYTE comParity; ** BYTE comFlowControl; ** } sCOM_ATTR, *pCOM_ATTR; ** ** typedef struct sSYSTEM_INFO ** { ** BYTE gsiVendorName[40]; ** BYTE gsiSerialNumber[16]; ** BYTE gsiFirmVersion[16]; ** BYTE gsiBootVersion[16]; ** BYTE gsiMbVersion[16]; ** BYTE gsiModelName[8]; ** BYTE gsiLocalIp[4]; ** BYTE gsiCurrentIp[4]; ** DWORD gsiTimeTick; ** DWORD gsiCpuSpeed; ** DWORD gsiICache; ** DWORD gsiDCache; ** DWORD gsiScache; ** DWORD gsiMemorySize; ** DWORD gsiMemorySpeed; ** DWORD gsiEvents; ** BYTE gsiMacAddress[6]; ** BYTE gsiDhcp; ** BYTE gsiBeeper; ** BYTE gsiChannelUsage; ** BYTE gsiMaxAtaMode; ** BYTE gsiSdramEcc; // 1:if ECC enabled ** BYTE gsiRebuildPriority; ** sCOM_ATTR gsiComA; // 5 bytes ** sCOM_ATTR gsiComB; // 5 bytes ** BYTE gsiIdeChannels; ** BYTE gsiScsiHostChannels; ** BYTE gsiIdeHostChannels; ** BYTE gsiMaxVolumeSet; ** BYTE gsiMaxRaidSet; ** BYTE gsiEtherPort; // 1:if ether net port supported ** BYTE gsiRaid6Engine; // 1:Raid6 engine supported ** BYTE gsiRes[75]; ** } sSYSTEM_INFO, *pSYSTEM_INFO; ** ** GUI_CLEAR_EVENT : Clear System Event ** byte 0,1 : length ** byte 2 : command code 0x24 ** ** GUI_MUTE_BEEPER : Mute current beeper ** byte 0,1 : length ** byte 2 : command code 0x30 ** ** GUI_BEEPER_SETTING : Disable beeper ** byte 0,1 : length ** byte 2 : command code 0x31 ** byte 3 : 0->disable, 1->enable ** ** GUI_SET_PASSWORD : Change password ** byte 0,1 : length ** byte 2 : command code 0x32 ** byte 3 : pass word length ( must <= 15 ) ** byte 4 : password (must be alpha-numerical) ** ** GUI_HOST_INTERFACE_MODE : Set host interface mode ** byte 0,1 : length ** byte 2 : command code 0x33 ** byte 3 : 0->Independent, 1->cluster ** ** GUI_REBUILD_PRIORITY : Set rebuild priority ** byte 0,1 : length ** byte 2 : command code 0x34 ** byte 3 : 0/1/2/3 (low->high) ** ** GUI_MAX_ATA_MODE : Set maximum ATA mode to be used ** byte 0,1 : length ** byte 2 : command code 0x35 ** byte 3 : 0/1/2/3 (133/100/66/33) ** ** GUI_RESET_CONTROLLER : Reset Controller ** byte 0,1 : length ** byte 2 : command code 0x36 ** *Response with VT100 screen (discard it) ** ** GUI_COM_PORT_SETTING : COM port setting ** byte 0,1 : length ** byte 2 : command code 0x37 ** byte 3 : 0->COMA (term port), 1->COMB (debug port) ** byte 4 : 0/1/2/3/4/5/6/7 (1200/2400/4800/9600/19200/38400/57600/115200) ** byte 5 : data bit (0:7 bit, 1:8 bit : must be 8 bit) ** byte 6 : stop bit (0:1, 1:2 stop bits) ** byte 7 : parity (0:none, 1:off, 2:even) ** byte 8 : flow control (0:none, 1:xon/xoff, 2:hardware => must use none) ** ** GUI_NO_OPERATION : No operation ** byte 0,1 : length ** byte 2 : command code 0x38 ** ** GUI_DHCP_IP : Set DHCP option and local IP address ** byte 0,1 : length ** byte 2 : command code 0x39 ** byte 3 : 0:dhcp disabled, 1:dhcp enabled ** byte 4/5/6/7 : IP address ** ** GUI_CREATE_PASS_THROUGH : Create pass through disk ** byte 0,1 : length ** byte 2 : command code 0x40 ** byte 3 : device # ** byte 4 : scsi channel (0/1) ** byte 5 : scsi id (0-->15) ** byte 6 : scsi lun (0-->7) ** byte 7 : tagged queue (1 : enabled) ** byte 8 : cache mode (1 : enabled) ** byte 9 : max speed (0/1/2/3/4, async/20/40/80/160 for scsi) ** (0/1/2/3/4, 33/66/100/133/150 for ide ) ** ** GUI_MODIFY_PASS_THROUGH : Modify pass through disk ** byte 0,1 : length ** byte 2 : command code 0x41 ** byte 3 : device # ** byte 4 : scsi channel (0/1) ** byte 5 : scsi id (0-->15) ** byte 6 : scsi lun (0-->7) ** byte 7 : tagged queue (1 : enabled) ** byte 8 : cache mode (1 : enabled) ** byte 9 : max speed (0/1/2/3/4, async/20/40/80/160 for scsi) ** (0/1/2/3/4, 33/66/100/133/150 for ide ) ** ** GUI_DELETE_PASS_THROUGH : Delete pass through disk ** byte 0,1 : length ** byte 2 : command code 0x42 ** byte 3 : device# to be deleted ** ** GUI_IDENTIFY_DEVICE : Identify Device ** byte 0,1 : length ** byte 2 : command code 0x43 ** byte 3 : Flash Method(0:flash selected, 1:flash not selected) ** byte 4/5/6/7 : IDE device mask to be flashed ** note .... no response data available ** ** GUI_CREATE_RAIDSET : Create Raid Set ** byte 0,1 : length ** byte 2 : command code 0x50 ** byte 3/4/5/6 : device mask ** byte 7-22 : raidset name (if byte 7 == 0:use default) ** ** GUI_DELETE_RAIDSET : Delete Raid Set ** byte 0,1 : length ** byte 2 : command code 0x51 ** byte 3 : raidset# ** ** GUI_EXPAND_RAIDSET : Expand Raid Set ** byte 0,1 : length ** byte 2 : command code 0x52 ** byte 3 : raidset# ** byte 4/5/6/7 : device mask for expansion ** byte 8/9/10 : (8:0 no change, 1 change, 0xff:terminate, 9:new raid level,10:new stripe size 0/1/2/3/4/5->4/8/16/32/64/128K ) ** byte 11/12/13 : repeat for each volume in the raidset .... ** ** GUI_ACTIVATE_RAIDSET : Activate incomplete raid set ** byte 0,1 : length ** byte 2 : command code 0x53 ** byte 3 : raidset# ** ** GUI_CREATE_HOT_SPARE : Create hot spare disk ** byte 0,1 : length ** byte 2 : command code 0x54 ** byte 3/4/5/6 : device mask for hot spare creation ** ** GUI_DELETE_HOT_SPARE : Delete hot spare disk ** byte 0,1 : length ** byte 2 : command code 0x55 ** byte 3/4/5/6 : device mask for hot spare deletion ** ** GUI_CREATE_VOLUME : Create volume set ** byte 0,1 : length ** byte 2 : command code 0x60 ** byte 3 : raidset# ** byte 4-19 : volume set name (if byte4 == 0, use default) ** byte 20-27 : volume capacity (blocks) ** byte 28 : raid level ** byte 29 : stripe size (0/1/2/3/4/5->4/8/16/32/64/128K) ** byte 30 : channel ** byte 31 : ID ** byte 32 : LUN ** byte 33 : 1 enable tag ** byte 34 : 1 enable cache ** byte 35 : speed (0/1/2/3/4->async/20/40/80/160 for scsi) ** (0/1/2/3/4->33/66/100/133/150 for IDE ) ** byte 36 : 1 to select quick init ** ** GUI_MODIFY_VOLUME : Modify volume Set ** byte 0,1 : length ** byte 2 : command code 0x61 ** byte 3 : volumeset# ** byte 4-19 : new volume set name (if byte4 == 0, not change) ** byte 20-27 : new volume capacity (reserved) ** byte 28 : new raid level ** byte 29 : new stripe size (0/1/2/3/4/5->4/8/16/32/64/128K) ** byte 30 : new channel ** byte 31 : new ID ** byte 32 : new LUN ** byte 33 : 1 enable tag ** byte 34 : 1 enable cache ** byte 35 : speed (0/1/2/3/4->async/20/40/80/160 for scsi) ** (0/1/2/3/4->33/66/100/133/150 for IDE ) ** ** GUI_DELETE_VOLUME : Delete volume set ** byte 0,1 : length ** byte 2 : command code 0x62 ** byte 3 : volumeset# ** ** GUI_START_CHECK_VOLUME : Start volume consistency check ** byte 0,1 : length ** byte 2 : command code 0x63 ** byte 3 : volumeset# ** ** GUI_STOP_CHECK_VOLUME : Stop volume consistency check ** byte 0,1 : length ** byte 2 : command code 0x64 ** --------------------------------------------------------------------- ** 4. Returned data ** --------------------------------------------------------------------- ** (A) Header : 3 bytes sequence (0x5E, 0x01, 0x61) ** (B) Length : 2 bytes (low byte 1st, excludes length and checksum byte) ** (C) status or data : ** <1> If length == 1 ==> 1 byte status code ** #define GUI_OK 0x41 ** #define GUI_RAIDSET_NOT_NORMAL 0x42 ** #define GUI_VOLUMESET_NOT_NORMAL 0x43 ** #define GUI_NO_RAIDSET 0x44 ** #define GUI_NO_VOLUMESET 0x45 ** #define GUI_NO_PHYSICAL_DRIVE 0x46 ** #define GUI_PARAMETER_ERROR 0x47 ** #define GUI_UNSUPPORTED_COMMAND 0x48 ** #define GUI_DISK_CONFIG_CHANGED 0x49 ** #define GUI_INVALID_PASSWORD 0x4a ** #define GUI_NO_DISK_SPACE 0x4b ** #define GUI_CHECKSUM_ERROR 0x4c ** #define GUI_PASSWORD_REQUIRED 0x4d ** <2> If length > 1 ==> data block returned from controller and the contents depends on the command code ** (E) Checksum : checksum of length and status or data byte ************************************************************************** */