/******************************************************************************

  Copyright (c) 2013-2019, Intel Corporation
  All rights reserved.

  Redistribution and use in source and binary forms, with or without 
  modification, are permitted provided that the following conditions are met:
  
   1. Redistributions of source code must retain the above copyright notice, 
      this list of conditions and the following disclaimer.
  
   2. Redistributions in binary form must reproduce the above copyright 
      notice, this list of conditions and the following disclaimer in the 
      documentation and/or other materials provided with the distribution.
  
   3. Neither the name of the Intel Corporation nor the names of its 
      contributors may be used to endorse or promote products derived from 
      this software without specific prior written permission.
  
  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  POSSIBILITY OF SUCH DAMAGE.

******************************************************************************/
/*$FreeBSD$*/

#include "ixl.h"
#include "ixl_pf.h"

#ifdef IXL_IW
#include "ixl_iw.h"
#include "ixl_iw_int.h"
#endif

#ifdef PCI_IOV
#include "ixl_pf_iov.h"
#endif

/*********************************************************************
 *  Driver version
 *********************************************************************/
#define IXL_DRIVER_VERSION_MAJOR	1
#define IXL_DRIVER_VERSION_MINOR	11
#define IXL_DRIVER_VERSION_BUILD	9

char ixl_driver_version[] = __XSTRING(IXL_DRIVER_VERSION_MAJOR) "."
			    __XSTRING(IXL_DRIVER_VERSION_MINOR) "."
			    __XSTRING(IXL_DRIVER_VERSION_BUILD) "-k";

/*********************************************************************
 *  PCI Device ID Table
 *
 *  Used by probe to select devices to load on
 *  Last field stores an index into ixl_strings
 *  Last entry must be all 0s
 *
 *  { Vendor ID, Device ID, SubVendor ID, SubDevice ID, String Index }
 *********************************************************************/

static ixl_vendor_info_t ixl_vendor_info_array[] =
{
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_SFP_XL710, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_KX_B, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_KX_C, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_QSFP_A, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_QSFP_B, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_QSFP_C, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_10G_BASE_T, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_10G_BASE_T4, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_KX_X722, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_QSFP_X722, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_SFP_X722, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_1G_BASE_T_X722, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_10G_BASE_T_X722, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_SFP_I_X722, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_25G_B, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_25G_SFP28, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_10G_BASE_T_BC, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_10G_SFP, 0, 0, 0},
	{I40E_INTEL_VENDOR_ID, I40E_DEV_ID_10G_B, 0, 0, 0},
	/* required last entry */
	{0, 0, 0, 0, 0}
};

/*********************************************************************
 *  Table of branding strings
 *********************************************************************/

static char    *ixl_strings[] = {
	"Intel(R) Ethernet Connection 700 Series PF Driver"
};


/*********************************************************************
 *  Function prototypes
 *********************************************************************/
static int      ixl_probe(device_t);
static int      ixl_attach(device_t);
static int      ixl_detach(device_t);
static int      ixl_shutdown(device_t);

static int	ixl_save_pf_tunables(struct ixl_pf *);

/*********************************************************************
 *  FreeBSD Device Interface Entry Points
 *********************************************************************/

static device_method_t ixl_methods[] = {
	/* Device interface */
	DEVMETHOD(device_probe, ixl_probe),
	DEVMETHOD(device_attach, ixl_attach),
	DEVMETHOD(device_detach, ixl_detach),
	DEVMETHOD(device_shutdown, ixl_shutdown),
#ifdef PCI_IOV
	DEVMETHOD(pci_iov_init, ixl_iov_init),
	DEVMETHOD(pci_iov_uninit, ixl_iov_uninit),
	DEVMETHOD(pci_iov_add_vf, ixl_add_vf),
#endif
	{0, 0}
};

static driver_t ixl_driver = {
	"ixl", ixl_methods, sizeof(struct ixl_pf),
};

devclass_t ixl_devclass;
DRIVER_MODULE(ixl, pci, ixl_driver, ixl_devclass, 0, 0);

MODULE_VERSION(ixl, 1);

MODULE_DEPEND(ixl, pci, 1, 1, 1);
MODULE_DEPEND(ixl, ether, 1, 1, 1);
#if defined(DEV_NETMAP) && __FreeBSD_version >= 1100000
MODULE_DEPEND(ixl, netmap, 1, 1, 1);
#endif /* DEV_NETMAP */

/*
** TUNEABLE PARAMETERS:
*/

static SYSCTL_NODE(_hw, OID_AUTO, ixl, CTLFLAG_RD, 0,
                   "IXL driver parameters");

/*
 * MSIX should be the default for best performance,
 * but this allows it to be forced off for testing.
 */
static int ixl_enable_msix = 1;
TUNABLE_INT("hw.ixl.enable_msix", &ixl_enable_msix);
SYSCTL_INT(_hw_ixl, OID_AUTO, enable_msix, CTLFLAG_RDTUN, &ixl_enable_msix, 0,
    "Enable MSI-X interrupts");

/*
** Number of descriptors per ring
** - TX and RX sizes are independently configurable
*/
static int ixl_tx_ring_size = IXL_DEFAULT_RING;
TUNABLE_INT("hw.ixl.tx_ring_size", &ixl_tx_ring_size);
SYSCTL_INT(_hw_ixl, OID_AUTO, tx_ring_size, CTLFLAG_RDTUN,
    &ixl_tx_ring_size, 0, "TX Descriptor Ring Size");

static int ixl_rx_ring_size = IXL_DEFAULT_RING;
TUNABLE_INT("hw.ixl.rx_ring_size", &ixl_rx_ring_size);
SYSCTL_INT(_hw_ixl, OID_AUTO, rx_ring_size, CTLFLAG_RDTUN,
    &ixl_rx_ring_size, 0, "RX Descriptor Ring Size");

/* 
** This can be set manually, if left as 0 the
** number of queues will be calculated based
** on cpus and msix vectors available.
*/
static int ixl_max_queues = 0;
TUNABLE_INT("hw.ixl.max_queues", &ixl_max_queues);
SYSCTL_INT(_hw_ixl, OID_AUTO, max_queues, CTLFLAG_RDTUN,
    &ixl_max_queues, 0, "Number of Queues");

/*
 * Leave this on unless you need to send flow control
 * frames (or other control frames) from software
 */
static int ixl_enable_tx_fc_filter = 1;
TUNABLE_INT("hw.ixl.enable_tx_fc_filter",
    &ixl_enable_tx_fc_filter);
SYSCTL_INT(_hw_ixl, OID_AUTO, enable_tx_fc_filter, CTLFLAG_RDTUN,
    &ixl_enable_tx_fc_filter, 0,
    "Filter out packets with Ethertype 0x8808 from being sent out by non-HW sources");

static int ixl_i2c_access_method = 0;
TUNABLE_INT("hw.ixl.i2c_access_method",
		    &ixl_i2c_access_method);
SYSCTL_INT(_hw_ixl, OID_AUTO, i2c_access_method, CTLFLAG_RDTUN,
		    &ixl_i2c_access_method, 0,
		        IXL_SYSCTL_HELP_I2C_METHOD);

/*
 * Different method for processing TX descriptor
 * completion.
 */
static int ixl_enable_head_writeback = 1;
TUNABLE_INT("hw.ixl.enable_head_writeback",
    &ixl_enable_head_writeback);
SYSCTL_INT(_hw_ixl, OID_AUTO, enable_head_writeback, CTLFLAG_RDTUN,
    &ixl_enable_head_writeback, 0,
    "For detecting last completed TX descriptor by hardware, use value written by HW instead of checking descriptors");

static int ixl_core_debug_mask = 0;
TUNABLE_INT("hw.ixl.core_debug_mask",
    &ixl_core_debug_mask);
SYSCTL_INT(_hw_ixl, OID_AUTO, core_debug_mask, CTLFLAG_RDTUN,
    &ixl_core_debug_mask, 0,
    "Display debug statements that are printed in non-shared code");

static int ixl_shared_debug_mask = 0;
TUNABLE_INT("hw.ixl.shared_debug_mask",
    &ixl_shared_debug_mask);
SYSCTL_INT(_hw_ixl, OID_AUTO, shared_debug_mask, CTLFLAG_RDTUN,
    &ixl_shared_debug_mask, 0,
    "Display debug statements that are printed in shared code");


/*
** Controls for Interrupt Throttling 
**	- true/false for dynamic adjustment
** 	- default values for static ITR
*/
static int ixl_dynamic_rx_itr = 1;
TUNABLE_INT("hw.ixl.dynamic_rx_itr", &ixl_dynamic_rx_itr);
SYSCTL_INT(_hw_ixl, OID_AUTO, dynamic_rx_itr, CTLFLAG_RDTUN,
    &ixl_dynamic_rx_itr, 0, "Dynamic RX Interrupt Rate");

static int ixl_dynamic_tx_itr = 1;
TUNABLE_INT("hw.ixl.dynamic_tx_itr", &ixl_dynamic_tx_itr);
SYSCTL_INT(_hw_ixl, OID_AUTO, dynamic_tx_itr, CTLFLAG_RDTUN,
    &ixl_dynamic_tx_itr, 0, "Dynamic TX Interrupt Rate");

static int ixl_rx_itr = IXL_ITR_8K;
TUNABLE_INT("hw.ixl.rx_itr", &ixl_rx_itr);
SYSCTL_INT(_hw_ixl, OID_AUTO, rx_itr, CTLFLAG_RDTUN,
    &ixl_rx_itr, 0, "RX Interrupt Rate");

static int ixl_tx_itr = IXL_ITR_4K;
TUNABLE_INT("hw.ixl.tx_itr", &ixl_tx_itr);
SYSCTL_INT(_hw_ixl, OID_AUTO, tx_itr, CTLFLAG_RDTUN,
    &ixl_tx_itr, 0, "TX Interrupt Rate");

#ifdef IXL_IW
int ixl_enable_iwarp = 0;
TUNABLE_INT("hw.ixl.enable_iwarp", &ixl_enable_iwarp);
SYSCTL_INT(_hw_ixl, OID_AUTO, enable_iwarp, CTLFLAG_RDTUN,
    &ixl_enable_iwarp, 0, "iWARP enabled");

#if __FreeBSD_version < 1100000
int ixl_limit_iwarp_msix = 1;
#else
int ixl_limit_iwarp_msix = IXL_IW_MAX_MSIX;
#endif
TUNABLE_INT("hw.ixl.limit_iwarp_msix", &ixl_limit_iwarp_msix);
SYSCTL_INT(_hw_ixl, OID_AUTO, limit_iwarp_msix, CTLFLAG_RDTUN,
    &ixl_limit_iwarp_msix, 0, "Limit MSIX vectors assigned to iWARP");
#endif

#ifdef DEV_NETMAP
#define NETMAP_IXL_MAIN /* only bring in one part of the netmap code */
#include <dev/netmap/if_ixl_netmap.h>
#endif /* DEV_NETMAP */

/*********************************************************************
 *  Device identification routine
 *
 *  ixl_probe determines if the driver should be loaded on
 *  the hardware based on PCI vendor/device id of the device.
 *
 *  return BUS_PROBE_DEFAULT on success, positive on failure
 *********************************************************************/

static int
ixl_probe(device_t dev)
{
	ixl_vendor_info_t *ent;

	u16	pci_vendor_id, pci_device_id;
	u16	pci_subvendor_id, pci_subdevice_id;
	char	device_name[256];

#if 0
	INIT_DEBUGOUT("ixl_probe: begin");
#endif
	pci_vendor_id = pci_get_vendor(dev);
	if (pci_vendor_id != I40E_INTEL_VENDOR_ID)
		return (ENXIO);

	pci_device_id = pci_get_device(dev);
	pci_subvendor_id = pci_get_subvendor(dev);
	pci_subdevice_id = pci_get_subdevice(dev);

	ent = ixl_vendor_info_array;
	while (ent->vendor_id != 0) {
		if ((pci_vendor_id == ent->vendor_id) &&
		    (pci_device_id == ent->device_id) &&

		    ((pci_subvendor_id == ent->subvendor_id) ||
		     (ent->subvendor_id == 0)) &&

		    ((pci_subdevice_id == ent->subdevice_id) ||
		     (ent->subdevice_id == 0))) {
			sprintf(device_name, "%s, Version - %s",
				ixl_strings[ent->index],
				ixl_driver_version);
			device_set_desc_copy(dev, device_name);
			return (BUS_PROBE_DEFAULT);
		}
		ent++;
	}
	return (ENXIO);
}

/*
 * Sanity check and save off tunable values.
 */
static int
ixl_save_pf_tunables(struct ixl_pf *pf)
{
	device_t dev = pf->dev;

	/* Save tunable information */
	pf->enable_msix = ixl_enable_msix;
	pf->max_queues = ixl_max_queues;
	pf->enable_tx_fc_filter = ixl_enable_tx_fc_filter;
	pf->dynamic_rx_itr = ixl_dynamic_rx_itr;
	pf->dynamic_tx_itr = ixl_dynamic_tx_itr;
	pf->dbg_mask = ixl_core_debug_mask;
	pf->hw.debug_mask = ixl_shared_debug_mask;
#ifdef DEV_NETMAP
	if (ixl_enable_head_writeback == 0)
		device_printf(dev, "Head writeback mode cannot be disabled "
		    "when netmap is enabled\n");
	pf->vsi.enable_head_writeback = 1;
#else
	pf->vsi.enable_head_writeback = !!(ixl_enable_head_writeback);
#endif
	ixl_vsi_setup_rings_size(&pf->vsi, ixl_tx_ring_size, ixl_rx_ring_size);

	if (ixl_i2c_access_method > IXL_I2C_ACCESS_METHOD_TYPE_LENGTH - 1
	    || ixl_i2c_access_method < IXL_I2C_ACCESS_METHOD_BEST_AVAILABLE)
		pf->i2c_access_method = IXL_I2C_ACCESS_METHOD_BEST_AVAILABLE;
	else
		pf->i2c_access_method =
		    (enum ixl_i2c_access_method_t)ixl_i2c_access_method;

	if (ixl_tx_itr < 0 || ixl_tx_itr > IXL_MAX_ITR) {
		device_printf(dev, "Invalid tx_itr value of %d set!\n",
		    ixl_tx_itr);
		device_printf(dev, "tx_itr must be between %d and %d, "
		    "inclusive\n",
		    0, IXL_MAX_ITR);
		device_printf(dev, "Using default value of %d instead\n",
		    IXL_ITR_4K);
		pf->tx_itr = IXL_ITR_4K;
	} else
		pf->tx_itr = ixl_tx_itr;

	if (ixl_rx_itr < 0 || ixl_rx_itr > IXL_MAX_ITR) {
		device_printf(dev, "Invalid rx_itr value of %d set!\n",
		    ixl_rx_itr);
		device_printf(dev, "rx_itr must be between %d and %d, "
		    "inclusive\n",
		    0, IXL_MAX_ITR);
		device_printf(dev, "Using default value of %d instead\n",
		    IXL_ITR_8K);
		pf->rx_itr = IXL_ITR_8K;
	} else
		pf->rx_itr = ixl_rx_itr;

	return (0);
}

static int
ixl_attach_recovery_mode(struct ixl_pf *pf)
{
	struct ixl_vsi *vsi = &pf->vsi;
	struct i40e_hw *hw = &pf->hw;
	device_t dev = pf->dev;
	int error = 0;

	device_printf(dev, "Firmware recovery mode detected. Limiting functionality. Refer to Intel(R) Ethernet Adapters and Devices User Guide for details on firmware recovery mode.\n");

	atomic_set_int(&pf->state, IXL_PF_STATE_RECOVERY_MODE);

	i40e_get_mac_addr(hw, hw->mac.addr);

	pf->msix = ixl_init_msix(pf);
	ixl_setup_stations(pf);
	ixl_setup_interface(pf->dev, vsi);

	if (pf->msix > 1) {
		error = ixl_setup_adminq_msix(pf);
		if (error) {
			device_printf(dev, "ixl_setup_adminq_msix() error: %d\n",
			    error);
			goto recovery_err_late;
		}
		error = ixl_setup_adminq_tq(pf);
		if (error) {
			device_printf(dev, "ixl_setup_adminq_tq() error: %d\n",
			    error);
			goto recovery_err_late;
		}
		ixl_configure_intr0_msix(pf);
		ixl_enable_intr0(hw);
	} else {
		error = ixl_setup_legacy(pf);

		error = ixl_setup_adminq_tq(pf);
		if (error) {
			device_printf(dev, "ixl_setup_adminq_tq() error: %d\n",
			    error);
			goto recovery_err_late;
		}
	}

	/* Get the bus configuration and set the shared code's config */
	ixl_get_bus_info(pf);

	/* Initialize statistics & add sysctls */
	ixl_add_device_sysctls(pf);

	/* Start the local timer */
	IXL_PF_LOCK(pf);
	callout_reset(&pf->timer, hz, ixl_local_timer, pf);
	IXL_PF_UNLOCK(pf);

recovery_err_late:
	return (error);
}

/*********************************************************************
 *  Device initialization routine
 *
 *  The attach entry point is called when the driver is being loaded.
 *  This routine identifies the type of hardware, allocates all resources
 *  and initializes the hardware.
 *
 *  return 0 on success, positive on failure
 *********************************************************************/

static int
ixl_attach(device_t dev)
{
	struct ixl_pf	*pf;
	struct i40e_hw	*hw;
	struct ixl_vsi  *vsi;
	enum i40e_get_fw_lldp_status_resp lldp_status;
	enum i40e_status_code status;
	int             error = 0;

	INIT_DEBUGOUT("ixl_attach: begin");

	/* Allocate, clear, and link in our primary soft structure */
	pf = device_get_softc(dev);
	pf->dev = pf->osdep.dev = dev;
	hw = &pf->hw;

	/*
	** Note this assumes we have a single embedded VSI,
	** this could be enhanced later to allocate multiple
	*/
	vsi = &pf->vsi;
	vsi->dev = pf->dev;
	vsi->back = pf;

	/* Save tunable values */
	error = ixl_save_pf_tunables(pf);
	if (error)
		return (error);

	/* Core Lock Init*/
	IXL_PF_LOCK_INIT(pf, device_get_nameunit(dev));

	/* Set up the timer callout */
	callout_init_mtx(&pf->timer, &pf->pf_mtx, 0);

	/* Do PCI setup - map BAR0, etc */
	if (ixl_allocate_pci_resources(pf)) {
		error = ENXIO;
		goto err_out;
	}

	/* Establish a clean starting point */
	i40e_clear_hw(hw);

	/* Don't try to reset device if it's in recovery mode */
	if (!ixl_fw_recovery_mode(pf)) {
		status = i40e_pf_reset(hw);
		if (status) {
			device_printf(dev, "PF reset failure %s\n",
			    i40e_stat_str(hw, status));
			error = EIO;
			goto err_out;
		}
	}

	/* Initialize the shared code */
	status = i40e_init_shared_code(hw);
	if (status) {
		device_printf(dev, "Unable to initialize shared code, error %s\n",
		    i40e_stat_str(hw, status));
		error = EIO;
		goto err_out;
	}

	/* Set up the admin queue */
	hw->aq.num_arq_entries = IXL_AQ_LEN;
	hw->aq.num_asq_entries = IXL_AQ_LEN;
	hw->aq.arq_buf_size = IXL_AQ_BUF_SZ;
	hw->aq.asq_buf_size = IXL_AQ_BUF_SZ;

	status = i40e_init_adminq(hw);
	if (status != 0 && status != I40E_ERR_FIRMWARE_API_VERSION) {
		device_printf(dev, "Unable to initialize Admin Queue, error %s\n",
		    i40e_stat_str(hw, status));
		error = EIO;
		goto err_out;
	}
	ixl_print_nvm_version(pf);

	if (status == I40E_ERR_FIRMWARE_API_VERSION) {
		device_printf(dev, "The driver for the device stopped "
		    "because the NVM image is newer than expected.\n");
		device_printf(dev, "You must install the most recent version of "
		    "the network driver.\n");
		error = EIO;
		goto err_out;
	}

        if (hw->aq.api_maj_ver == I40E_FW_API_VERSION_MAJOR &&
	    hw->aq.api_min_ver > I40E_FW_MINOR_VERSION(hw)) {
		device_printf(dev, "The driver for the device detected "
		    "a newer version of the NVM image than expected.\n");
		device_printf(dev, "Please install the most recent version "
		    "of the network driver.\n");
	} else if (hw->aq.api_maj_ver == 1 && hw->aq.api_min_ver < 4) {
		device_printf(dev, "The driver for the device detected "
		    "an older version of the NVM image than expected.\n");
		device_printf(dev, "Please update the NVM image.\n");
	}

	if (ixl_fw_recovery_mode(pf))
		return ixl_attach_recovery_mode(pf);

	/* Clear PXE mode */
	i40e_clear_pxe_mode(hw);

	/* Get capabilities from the device */
	error = ixl_get_hw_capabilities(pf);
	if (error) {
		device_printf(dev, "HW capabilities failure!\n");
		goto err_get_cap;
	}

	/*
	 * Allocate interrupts and figure out number of queues to use
	 * for PF interface
	 */
	pf->msix = ixl_init_msix(pf);

	/* Set up host memory cache */
	status = i40e_init_lan_hmc(hw, hw->func_caps.num_tx_qp,
	    hw->func_caps.num_rx_qp, 0, 0);
	if (status) {
		device_printf(dev, "init_lan_hmc failed: %s\n",
		    i40e_stat_str(hw, status));
		goto err_get_cap;
	}

	status = i40e_configure_lan_hmc(hw, I40E_HMC_MODEL_DIRECT_ONLY);
	if (status) {
		device_printf(dev, "configure_lan_hmc failed: %s\n",
		    i40e_stat_str(hw, status));
		goto err_mac_hmc;
	}

	/* Init queue allocation manager */
	error = ixl_pf_qmgr_init(&pf->qmgr, hw->func_caps.num_tx_qp);
	if (error) {
		device_printf(dev, "Failed to init queue manager for PF queues, error %d\n",
		    error);
		goto err_mac_hmc;
	}
	/* reserve a contiguous allocation for the PF's VSI */
	error = ixl_pf_qmgr_alloc_contiguous(&pf->qmgr, vsi->num_queues, &pf->qtag);
	if (error) {
		device_printf(dev, "Failed to reserve queues for PF LAN VSI, error %d\n",
		    error);
		goto err_mac_hmc;
	}
	device_printf(dev, "Allocating %d queues for PF LAN VSI; %d queues active\n",
	    pf->qtag.num_allocated, pf->qtag.num_active);

	/* Disable LLDP from the firmware on XL710 for certain NVM versions */
	if (hw->mac.type == I40E_MAC_XL710 &&
	    (((hw->aq.fw_maj_ver == 4) && (hw->aq.fw_min_ver < 3)) ||
	    (hw->aq.fw_maj_ver < 4))) {
		i40e_aq_stop_lldp(hw, true, false, NULL);
		pf->state |= IXL_PF_STATE_FW_LLDP_DISABLED;
	}

	/* Try enabling Energy Efficient Ethernet (EEE) mode */
	if(i40e_enable_eee(hw, true) == I40E_SUCCESS)
		atomic_set_int(&pf->state, IXL_PF_STATE_EEE_ENABLED);
	else
		atomic_clear_int(&pf->state, IXL_PF_STATE_EEE_ENABLED);

	/* Get MAC addresses from hardware */
	i40e_get_mac_addr(hw, hw->mac.addr);
	error = i40e_validate_mac_addr(hw->mac.addr);
	if (error) {
		device_printf(dev, "validate_mac_addr failed: %d\n", error);
		goto err_mac_hmc;
	}
	bcopy(hw->mac.addr, hw->mac.perm_addr, ETHER_ADDR_LEN);
	i40e_get_port_mac_addr(hw, hw->mac.port_addr);

	/* Query device FW LLDP status */
	if (i40e_get_fw_lldp_status(hw, &lldp_status) == I40E_SUCCESS) {
		if (lldp_status == I40E_GET_FW_LLDP_STATUS_DISABLED) {
			atomic_set_int(&pf->state,
			    IXL_PF_STATE_FW_LLDP_DISABLED);
		} else {
			atomic_clear_int(&pf->state,
			    IXL_PF_STATE_FW_LLDP_DISABLED);
		}
	}

	/* Tell FW to apply DCB config on link up */
	i40e_aq_set_dcb_parameters(hw, true, NULL);

	/* Set up SW VSI and allocate queue memory and rings */
	if (ixl_setup_stations(pf)) { 
		device_printf(dev, "setup stations failed!\n");
		error = ENOMEM;
		goto err_mac_hmc;
	}

	/* Setup OS network interface / ifnet */
	if (ixl_setup_interface(dev, vsi)) {
		device_printf(dev, "interface setup failed!\n");
		error = EIO;
		goto err_late;
	}

	/* Determine link state */
	if (ixl_attach_get_link_status(pf)) {
		error = EINVAL;
		goto err_late;
	}

	error = ixl_switch_config(pf);
	if (error) {
		device_printf(dev, "Initial ixl_switch_config() failed: %d\n",
		     error);
		goto err_late;
	}

	/* Limit PHY interrupts to link, autoneg, and modules failure */
	status = i40e_aq_set_phy_int_mask(hw, IXL_DEFAULT_PHY_INT_MASK,
	    NULL);
        if (status) {
		device_printf(dev, "i40e_aq_set_phy_mask() failed: err %s,"
		    " aq_err %s\n", i40e_stat_str(hw, status),
		    i40e_aq_str(hw, hw->aq.asq_last_status));
		goto err_late;
	}

	/* Get the bus configuration and set the shared code's config */
	ixl_get_bus_info(pf);

	/*
	 * In MSI-X mode, initialize the Admin Queue interrupt,
	 * so userland tools can communicate with the adapter regardless of
	 * the ifnet interface's status.
	 */
	if (pf->msix > 1) {
		error = ixl_setup_adminq_msix(pf);
		if (error) {
			device_printf(dev, "ixl_setup_adminq_msix() error: %d\n",
			    error);
			goto err_late;
		}
		error = ixl_setup_adminq_tq(pf);
		if (error) {
			device_printf(dev, "ixl_setup_adminq_tq() error: %d\n",
			    error);
			goto err_late;
		}
		ixl_configure_intr0_msix(pf);
		ixl_enable_intr0(hw);

		error = ixl_setup_queue_msix(vsi);
		if (error)
			device_printf(dev, "ixl_setup_queue_msix() error: %d\n",
			    error);
		error = ixl_setup_queue_tqs(vsi);
		if (error)
			device_printf(dev, "ixl_setup_queue_tqs() error: %d\n",
			    error);
	} else {
		error = ixl_setup_legacy(pf);

		error = ixl_setup_adminq_tq(pf);
		if (error) {
			device_printf(dev, "ixl_setup_adminq_tq() error: %d\n",
			    error);
			goto err_late;
		}

		error = ixl_setup_queue_tqs(vsi);
		if (error)
			device_printf(dev, "ixl_setup_queue_tqs() error: %d\n",
			    error);
	}

	if (error) {
		device_printf(dev, "interrupt setup error: %d\n", error);
	}

	/* Set initial advertised speed sysctl value */
	ixl_set_initial_advertised_speeds(pf);

	/* Initialize statistics & add sysctls */
	ixl_add_device_sysctls(pf);

	ixl_pf_reset_stats(pf);
	ixl_update_stats_counters(pf);
	ixl_add_hw_stats(pf);

	/* Add protocol filters to list */
	ixl_init_filters(vsi);

	/* Register for VLAN events */
	vsi->vlan_attach = EVENTHANDLER_REGISTER(vlan_config,
	    ixl_register_vlan, vsi, EVENTHANDLER_PRI_FIRST);
	vsi->vlan_detach = EVENTHANDLER_REGISTER(vlan_unconfig,
	    ixl_unregister_vlan, vsi, EVENTHANDLER_PRI_FIRST);

#ifdef PCI_IOV
	ixl_initialize_sriov(pf);
#endif

#ifdef DEV_NETMAP
	ixl_netmap_attach(vsi);
#endif /* DEV_NETMAP */

#ifdef IXL_IW
	if (hw->func_caps.iwarp && ixl_enable_iwarp) {
		pf->iw_enabled = (pf->iw_msix > 0) ? true : false;
		if (pf->iw_enabled) {
			error = ixl_iw_pf_attach(pf);
			if (error) {
				device_printf(dev,
				    "interfacing to iwarp driver failed: %d\n",
				    error);
				goto err_late;
			} else
				device_printf(dev, "iWARP ready\n");
		} else
			device_printf(dev,
			    "iwarp disabled on this device (no msix vectors)\n");
	} else {
		pf->iw_enabled = false;
		device_printf(dev, "The device is not iWARP enabled\n");
	}
#endif
	/* Start the local timer */
	IXL_PF_LOCK(pf);
	callout_reset(&pf->timer, hz, ixl_local_timer, pf);
	IXL_PF_UNLOCK(pf);

	INIT_DEBUGOUT("ixl_attach: end");
	return (0);

err_late:
	if (vsi->ifp != NULL) {
		ether_ifdetach(vsi->ifp);
		if_free(vsi->ifp);
	}
err_mac_hmc:
	i40e_shutdown_lan_hmc(hw);
err_get_cap:
	i40e_shutdown_adminq(hw);
err_out:
	ixl_free_pci_resources(pf);
	ixl_free_vsi(vsi);
	IXL_PF_LOCK_DESTROY(pf);
	return (error);
}

/*********************************************************************
 *  Device removal routine
 *
 *  The detach entry point is called when the driver is being removed.
 *  This routine stops the adapter and deallocates all the resources
 *  that were allocated for driver operation.
 *
 *  return 0 on success, positive on failure
 *********************************************************************/

static int
ixl_detach(device_t dev)
{
	struct ixl_pf		*pf = device_get_softc(dev);
	struct i40e_hw		*hw = &pf->hw;
	struct ixl_vsi		*vsi = &pf->vsi;
	enum i40e_status_code	status;
#if defined(PCI_IOV) || defined(IXL_IW)
	int			error;
#endif

	INIT_DEBUGOUT("ixl_detach: begin");

	/* Make sure VLANS are not using driver */
	if (vsi->ifp->if_vlantrunk != NULL) {
		device_printf(dev, "Vlan in use, detach first\n");
		return (EBUSY);
	}

#ifdef PCI_IOV
	error = pci_iov_detach(dev);
	if (error != 0) {
		device_printf(dev, "SR-IOV in use; detach first.\n");
		return (error);
	}
#endif

	/* Remove all previously allocated media types */
	ifmedia_removeall(&vsi->media);

	ether_ifdetach(vsi->ifp);
	if (vsi->ifp->if_drv_flags & IFF_DRV_RUNNING)
		ixl_stop(pf);

	/* Shutdown LAN HMC */
	if (hw->hmc.hmc_obj) {
		status = i40e_shutdown_lan_hmc(hw);
		if (status)
			device_printf(dev,
			    "Shutdown LAN HMC failed with code %s\n", i40e_stat_str(hw, status));
	}

	/* Teardown LAN queue resources */
	ixl_teardown_queue_msix(vsi);
	ixl_free_queue_tqs(vsi);

	/* Timer enqueues admin task. Stop it before freeing the admin taskqueue */
	callout_drain(&pf->timer);

	/* Shutdown admin queue */
	ixl_disable_intr0(hw);
	ixl_teardown_adminq_msix(pf);

	status = i40e_shutdown_adminq(hw);
	if (status)
		device_printf(dev,
		    "Shutdown Admin queue failed with code %d\n", status);

	ixl_free_adminq_tq(pf);

	/* Unregister VLAN events */
	if (vsi->vlan_attach != NULL)
		EVENTHANDLER_DEREGISTER(vlan_config, vsi->vlan_attach);
	if (vsi->vlan_detach != NULL)
		EVENTHANDLER_DEREGISTER(vlan_unconfig, vsi->vlan_detach);

#ifdef IXL_IW
	if (ixl_enable_iwarp && pf->iw_enabled) {
		error = ixl_iw_pf_detach(pf);
		if (error == EBUSY) {
			device_printf(dev, "iwarp in use; stop it first.\n");
			return (error);
		}
	}
#endif

#ifdef DEV_NETMAP
	netmap_detach(vsi->ifp);
#endif /* DEV_NETMAP */
	ixl_pf_qmgr_destroy(&pf->qmgr);
	ixl_free_pci_resources(pf);
	bus_generic_detach(dev);
	if_free(vsi->ifp);
	ixl_free_vsi(vsi);
	IXL_PF_LOCK_DESTROY(pf);
	return (0);
}

/*********************************************************************
 *
 *  Shutdown entry point
 *
 **********************************************************************/

static int
ixl_shutdown(device_t dev)
{
	struct ixl_pf *pf = device_get_softc(dev);
	ixl_stop(pf);
	return (0);
}