/*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2000-2001 Jonathan Chen All rights reserved. * Copyright (c) 2002-2004 M. Warner Losh * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ /*- * Copyright (c) 1998, 1999 and 2000 * HAYAKAWA Koichi. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by HAYAKAWA Koichi. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Driver for PCI to CardBus Bridge chips * * References: * TI Datasheets: * http://www-s.ti.com/cgi-bin/sc/generic2.cgi?family=PCI+CARDBUS+CONTROLLERS * * Written by Jonathan Chen * The author would like to acknowledge: * * HAYAKAWA Koichi: Author of the NetBSD code for the same thing * * Warner Losh: Newbus/newcard guru and author of the pccard side of things * * YAMAMOTO Shigeru: Author of another FreeBSD cardbus driver * * David Cross: Author of the initial ugly hack for a specific cardbus card */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "power_if.h" #include "card_if.h" #include "pcib_if.h" #define DPRINTF(x) do { if (cbb_debug) printf x; } while (0) #define DEVPRINTF(x) do { if (cbb_debug) device_printf x; } while (0) #define PCI_MASK_CONFIG(DEV,REG,MASK,SIZE) \ pci_write_config(DEV, REG, pci_read_config(DEV, REG, SIZE) MASK, SIZE) #define PCI_MASK2_CONFIG(DEV,REG,MASK1,MASK2,SIZE) \ pci_write_config(DEV, REG, ( \ pci_read_config(DEV, REG, SIZE) MASK1) MASK2, SIZE) #define CBB_CARD_PRESENT(s) ((s & CBB_STATE_CD) == 0) #define CBB_START_MEM 0x88000000 #define CBB_START_32_IO 0x1000 #define CBB_START_16_IO 0x100 devclass_t cbb_devclass; /* sysctl vars */ static SYSCTL_NODE(_hw, OID_AUTO, cbb, CTLFLAG_RD | CTLFLAG_MPSAFE, 0, "CBB parameters"); /* There's no way to say TUNEABLE_LONG to get the right types */ u_long cbb_start_mem = CBB_START_MEM; SYSCTL_ULONG(_hw_cbb, OID_AUTO, start_memory, CTLFLAG_RWTUN, &cbb_start_mem, CBB_START_MEM, "Starting address for memory allocations"); u_long cbb_start_16_io = CBB_START_16_IO; SYSCTL_ULONG(_hw_cbb, OID_AUTO, start_16_io, CTLFLAG_RWTUN, &cbb_start_16_io, CBB_START_16_IO, "Starting ioport for 16-bit cards"); u_long cbb_start_32_io = CBB_START_32_IO; SYSCTL_ULONG(_hw_cbb, OID_AUTO, start_32_io, CTLFLAG_RWTUN, &cbb_start_32_io, CBB_START_32_IO, "Starting ioport for 32-bit cards"); int cbb_debug = 0; SYSCTL_INT(_hw_cbb, OID_AUTO, debug, CTLFLAG_RWTUN, &cbb_debug, 0, "Verbose cardbus bridge debugging"); static void cbb_insert(struct cbb_softc *sc); static void cbb_removal(struct cbb_softc *sc); static uint32_t cbb_detect_voltage(device_t brdev); static int cbb_cardbus_reset_power(device_t brdev, device_t child, int on); static int cbb_cardbus_io_open(device_t brdev, int win, uint32_t start, uint32_t end); static int cbb_cardbus_mem_open(device_t brdev, int win, uint32_t start, uint32_t end); static void cbb_cardbus_auto_open(struct cbb_softc *sc, int type); static int cbb_cardbus_activate_resource(device_t brdev, device_t child, int type, int rid, struct resource *res); static int cbb_cardbus_deactivate_resource(device_t brdev, device_t child, int type, int rid, struct resource *res); static struct resource *cbb_cardbus_alloc_resource(device_t brdev, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags); static int cbb_cardbus_release_resource(device_t brdev, device_t child, int type, int rid, struct resource *res); static int cbb_cardbus_power_enable_socket(device_t brdev, device_t child); static int cbb_cardbus_power_disable_socket(device_t brdev, device_t child); static int cbb_func_filt(void *arg); static void cbb_func_intr(void *arg); static void cbb_remove_res(struct cbb_softc *sc, struct resource *res) { struct cbb_reslist *rle; SLIST_FOREACH(rle, &sc->rl, link) { if (rle->res == res) { SLIST_REMOVE(&sc->rl, rle, cbb_reslist, link); free(rle, M_DEVBUF); return; } } } static struct resource * cbb_find_res(struct cbb_softc *sc, int type, int rid) { struct cbb_reslist *rle; SLIST_FOREACH(rle, &sc->rl, link) if (SYS_RES_MEMORY == rle->type && rid == rle->rid) return (rle->res); return (NULL); } static void cbb_insert_res(struct cbb_softc *sc, struct resource *res, int type, int rid) { struct cbb_reslist *rle; /* * Need to record allocated resource so we can iterate through * it later. */ rle = malloc(sizeof(struct cbb_reslist), M_DEVBUF, M_NOWAIT); if (rle == NULL) panic("cbb_cardbus_alloc_resource: can't record entry!"); rle->res = res; rle->type = type; rle->rid = rid; SLIST_INSERT_HEAD(&sc->rl, rle, link); } static void cbb_destroy_res(struct cbb_softc *sc) { struct cbb_reslist *rle; while ((rle = SLIST_FIRST(&sc->rl)) != NULL) { device_printf(sc->dev, "Danger Will Robinson: Resource " "left allocated! This is a bug... " "(rid=%x, type=%d, addr=%jx)\n", rle->rid, rle->type, rman_get_start(rle->res)); SLIST_REMOVE_HEAD(&sc->rl, link); free(rle, M_DEVBUF); } } /* * Disable function interrupts by telling the bridge to generate IRQ1 * interrupts. These interrupts aren't really generated by the chip, since * IRQ1 is reserved. Some chipsets assert INTA# inappropriately during * initialization, so this helps to work around the problem. * * XXX We can't do this workaround for all chipsets, because this * XXX causes interference with the keyboard because somechipsets will * XXX actually signal IRQ1 over their serial interrupt connections to * XXX the south bridge. Disable it it for now. */ void cbb_disable_func_intr(struct cbb_softc *sc) { #if 0 uint8_t reg; reg = (exca_getb(&sc->exca, EXCA_INTR) & ~EXCA_INTR_IRQ_MASK) | EXCA_INTR_IRQ_RESERVED1; exca_putb(&sc->exca, EXCA_INTR, reg); #endif } /* * Enable function interrupts. We turn on function interrupts when the card * requests an interrupt. The PCMCIA standard says that we should set * the lower 4 bits to 0 to route via PCI. Note: we call this for both * CardBus and R2 (PC Card) cases, but it should have no effect on CardBus * cards. */ static void cbb_enable_func_intr(struct cbb_softc *sc) { uint8_t reg; reg = (exca_getb(&sc->exca, EXCA_INTR) & ~EXCA_INTR_IRQ_MASK) | EXCA_INTR_IRQ_NONE; PCI_MASK_CONFIG(sc->dev, CBBR_BRIDGECTRL, & ~CBBM_BRIDGECTRL_INTR_IREQ_ISA_EN, 2); exca_putb(&sc->exca, EXCA_INTR, reg); } int cbb_detach(device_t brdev) { struct cbb_softc *sc = device_get_softc(brdev); device_t *devlist; int tmp, tries, error, numdevs; /* * Before we delete the children (which we have to do because * attach doesn't check for children busses correctly), we have * to detach the children. Even if we didn't need to delete the * children, we have to detach them. */ error = bus_generic_detach(brdev); if (error != 0) return (error); /* * Since the attach routine doesn't search for children before it * attaches them to this device, we must delete them here in order * for the kldload/unload case to work. If we failed to do that, then * we'd get duplicate devices when cbb.ko was reloaded. */ tries = 10; do { error = device_get_children(brdev, &devlist, &numdevs); if (error == 0) break; /* * Try hard to cope with low memory. */ if (error == ENOMEM) { pause("cbbnomem", 1); continue; } } while (tries-- > 0); for (tmp = 0; tmp < numdevs; tmp++) device_delete_child(brdev, devlist[tmp]); free(devlist, M_TEMP); /* Turn off the interrupts */ cbb_set(sc, CBB_SOCKET_MASK, 0); /* reset 16-bit pcmcia bus */ exca_clrb(&sc->exca, EXCA_INTR, EXCA_INTR_RESET); /* turn off power */ cbb_power(brdev, CARD_OFF); /* Ack the interrupt */ cbb_set(sc, CBB_SOCKET_EVENT, 0xffffffff); /* * Wait for the thread to die. kproc_exit will do a wakeup * on the event thread's struct proc * so that we know it is * safe to proceed. IF the thread is running, set the please * die flag and wait for it to comply. Since the wakeup on * the event thread happens only in kproc_exit, we don't * need to loop here. */ bus_teardown_intr(brdev, sc->irq_res, sc->intrhand); mtx_lock(&sc->mtx); sc->flags |= CBB_KTHREAD_DONE; while (sc->flags & CBB_KTHREAD_RUNNING) { DEVPRINTF((sc->dev, "Waiting for thread to die\n")); wakeup(&sc->intrhand); msleep(sc->event_thread, &sc->mtx, PWAIT, "cbbun", 0); } mtx_unlock(&sc->mtx); bus_release_resource(brdev, SYS_RES_IRQ, 0, sc->irq_res); bus_release_resource(brdev, SYS_RES_MEMORY, CBBR_SOCKBASE, sc->base_res); mtx_destroy(&sc->mtx); return (0); } int cbb_setup_intr(device_t dev, device_t child, struct resource *irq, int flags, driver_filter_t *filt, driver_intr_t *intr, void *arg, void **cookiep) { struct cbb_intrhand *ih; struct cbb_softc *sc = device_get_softc(dev); int err; if (filt == NULL && intr == NULL) return (EINVAL); ih = malloc(sizeof(struct cbb_intrhand), M_DEVBUF, M_NOWAIT); if (ih == NULL) return (ENOMEM); *cookiep = ih; ih->filt = filt; ih->intr = intr; ih->arg = arg; ih->sc = sc; /* * XXX need to turn on ISA interrupts, if we ever support them, but * XXX for now that's all we need to do. */ err = BUS_SETUP_INTR(device_get_parent(dev), child, irq, flags, filt ? cbb_func_filt : NULL, intr ? cbb_func_intr : NULL, ih, &ih->cookie); if (err != 0) { free(ih, M_DEVBUF); return (err); } cbb_enable_func_intr(sc); sc->cardok = 1; return 0; } int cbb_teardown_intr(device_t dev, device_t child, struct resource *irq, void *cookie) { struct cbb_intrhand *ih; int err; /* XXX Need to do different things for ISA interrupts. */ ih = (struct cbb_intrhand *) cookie; err = BUS_TEARDOWN_INTR(device_get_parent(dev), child, irq, ih->cookie); if (err != 0) return (err); free(ih, M_DEVBUF); return (0); } void cbb_driver_added(device_t brdev, driver_t *driver) { struct cbb_softc *sc = device_get_softc(brdev); device_t *devlist; device_t dev; int tmp; int numdevs; int wake = 0; DEVICE_IDENTIFY(driver, brdev); tmp = device_get_children(brdev, &devlist, &numdevs); if (tmp != 0) { device_printf(brdev, "Cannot get children list, no reprobe\n"); return; } for (tmp = 0; tmp < numdevs; tmp++) { dev = devlist[tmp]; if (device_get_state(dev) == DS_NOTPRESENT && device_probe_and_attach(dev) == 0) wake++; } free(devlist, M_TEMP); if (wake > 0) wakeup(&sc->intrhand); } void cbb_child_detached(device_t brdev, device_t child) { struct cbb_softc *sc = device_get_softc(brdev); /* I'm not sure we even need this */ if (child != sc->cbdev && child != sc->exca.pccarddev) device_printf(brdev, "Unknown child detached: %s\n", device_get_nameunit(child)); } /************************************************************************/ /* Kthreads */ /************************************************************************/ void cbb_event_thread(void *arg) { struct cbb_softc *sc = arg; uint32_t status; int err; int not_a_card = 0; /* * We need to act as a power sequencer on startup. Delay 2s/channel * to ensure the other channels have had a chance to come up. We likely * should add a lock that's shared on a per-slot basis so that only * one power event can happen per slot at a time. */ pause("cbbstart", hz * device_get_unit(sc->dev) * 2); mtx_lock(&sc->mtx); sc->flags |= CBB_KTHREAD_RUNNING; while ((sc->flags & CBB_KTHREAD_DONE) == 0) { mtx_unlock(&sc->mtx); status = cbb_get(sc, CBB_SOCKET_STATE); DPRINTF(("Status is 0x%x\n", status)); if (!CBB_CARD_PRESENT(status)) { not_a_card = 0; /* We know card type */ cbb_removal(sc); } else if (status & CBB_STATE_NOT_A_CARD) { /* * Up to 10 times, try to rescan the card when we see * NOT_A_CARD. 10 is somehwat arbitrary. When this * pathology hits, there's a ~40% chance each try will * fail. 10 tries takes about 5s and results in a * 99.99% certainty of the results. */ if (not_a_card++ < 10) { DEVPRINTF((sc->dev, "Not a card bit set, rescanning\n")); cbb_setb(sc, CBB_SOCKET_FORCE, CBB_FORCE_CV_TEST); } else { device_printf(sc->dev, "Can't determine card type\n"); } } else { not_a_card = 0; /* We know card type */ cbb_insert(sc); } /* * First time through we need to tell mountroot that we're * done. */ if (sc->sc_root_token) { root_mount_rel(sc->sc_root_token); sc->sc_root_token = NULL; } /* * Wait until it has been 250ms since the last time we * get an interrupt. We handle the rest of the interrupt * at the top of the loop. Although we clear the bit in the * ISR, we signal sc->cv from the detach path after we've * set the CBB_KTHREAD_DONE bit, so we can't do a simple * 250ms sleep here. * * In our ISR, we turn off the card changed interrupt. Turn * them back on here before we wait for them to happen. We * turn them on/off so that we can tolerate a large latency * between the time we signal cbb_event_thread and it gets * a chance to run. */ mtx_lock(&sc->mtx); cbb_setb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_CD | CBB_SOCKET_MASK_CSTS); msleep(&sc->intrhand, &sc->mtx, 0, "-", 0); err = 0; while (err != EWOULDBLOCK && (sc->flags & CBB_KTHREAD_DONE) == 0) err = msleep(&sc->intrhand, &sc->mtx, 0, "-", hz / 5); } DEVPRINTF((sc->dev, "Thread terminating\n")); sc->flags &= ~CBB_KTHREAD_RUNNING; mtx_unlock(&sc->mtx); kproc_exit(0); } /************************************************************************/ /* Insert/removal */ /************************************************************************/ static void cbb_insert(struct cbb_softc *sc) { uint32_t sockevent, sockstate; sockevent = cbb_get(sc, CBB_SOCKET_EVENT); sockstate = cbb_get(sc, CBB_SOCKET_STATE); DEVPRINTF((sc->dev, "card inserted: event=0x%08x, state=%08x\n", sockevent, sockstate)); if (sockstate & CBB_STATE_R2_CARD) { if (device_is_attached(sc->exca.pccarddev)) { sc->flags |= CBB_16BIT_CARD; exca_insert(&sc->exca); } else { device_printf(sc->dev, "16-bit card inserted, but no pccard bus.\n"); } } else if (sockstate & CBB_STATE_CB_CARD) { if (device_is_attached(sc->cbdev)) { sc->flags &= ~CBB_16BIT_CARD; CARD_ATTACH_CARD(sc->cbdev); } else { device_printf(sc->dev, "CardBus card inserted, but no cardbus bus.\n"); } } else { /* * We should power the card down, and try again a couple of * times if this happens. XXX */ device_printf(sc->dev, "Unsupported card type detected\n"); } } static void cbb_removal(struct cbb_softc *sc) { sc->cardok = 0; if (sc->flags & CBB_16BIT_CARD) { exca_removal(&sc->exca); } else { if (device_is_attached(sc->cbdev)) CARD_DETACH_CARD(sc->cbdev); } cbb_destroy_res(sc); } /************************************************************************/ /* Interrupt Handler */ /************************************************************************/ static int cbb_func_filt(void *arg) { struct cbb_intrhand *ih = (struct cbb_intrhand *)arg; struct cbb_softc *sc = ih->sc; /* * Make sure that the card is really there. */ if (!sc->cardok) return (FILTER_STRAY); if (!CBB_CARD_PRESENT(cbb_get(sc, CBB_SOCKET_STATE))) { sc->cardok = 0; return (FILTER_HANDLED); } /* * nb: don't have to check for giant or not, since that's done in the * ISR dispatch and one can't hold Giant in a filter anyway... */ return ((*ih->filt)(ih->arg)); } static void cbb_func_intr(void *arg) { struct cbb_intrhand *ih = (struct cbb_intrhand *)arg; struct cbb_softc *sc = ih->sc; /* * While this check may seem redundant, it helps close a race * condition. If the card is ejected after the filter runs, but * before this ISR can be scheduled, then we need to do the same * filtering to prevent the card's ISR from being called. One could * argue that the card's ISR should be able to cope, but experience * has shown they can't always. This mitigates the problem by making * the race quite a bit smaller. Properly written client ISRs should * cope with the card going away in the middle of the ISR. We assume * that drivers that are sophisticated enough to use filters don't * need our protection. This also allows us to ensure they *ARE* * called if their filter said they needed to be called. */ if (ih->filt == NULL) { if (!sc->cardok) return; if (!CBB_CARD_PRESENT(cbb_get(sc, CBB_SOCKET_STATE))) { sc->cardok = 0; return; } } /* * Call the registered ithread interrupt handler. This entire routine * will be called with Giant if this isn't an MP safe driver, or not * if it is. Either way, we don't have to worry. */ ih->intr(ih->arg); } /************************************************************************/ /* Generic Power functions */ /************************************************************************/ static uint32_t cbb_detect_voltage(device_t brdev) { struct cbb_softc *sc = device_get_softc(brdev); uint32_t psr; uint32_t vol = CARD_UKN_CARD; psr = cbb_get(sc, CBB_SOCKET_STATE); if (psr & CBB_STATE_5VCARD && psr & CBB_STATE_5VSOCK) vol |= CARD_5V_CARD; if (psr & CBB_STATE_3VCARD && psr & CBB_STATE_3VSOCK) vol |= CARD_3V_CARD; if (psr & CBB_STATE_XVCARD && psr & CBB_STATE_XVSOCK) vol |= CARD_XV_CARD; if (psr & CBB_STATE_YVCARD && psr & CBB_STATE_YVSOCK) vol |= CARD_YV_CARD; return (vol); } static uint8_t cbb_o2micro_power_hack(struct cbb_softc *sc) { uint8_t reg; /* * Issue #2: INT# not qualified with IRQ Routing Bit. An * unexpected PCI INT# may be generated during PC Card * initialization even with the IRQ Routing Bit Set with some * PC Cards. * * This is a two part issue. The first part is that some of * our older controllers have an issue in which the slot's PCI * INT# is NOT qualified by the IRQ routing bit (PCI reg. 3Eh * bit 7). Regardless of the IRQ routing bit, if NO ISA IRQ * is selected (ExCA register 03h bits 3:0, of the slot, are * cleared) we will generate INT# if IREQ# is asserted. The * second part is because some PC Cards prematurally assert * IREQ# before the ExCA registers are fully programmed. This * in turn asserts INT# because ExCA register 03h bits 3:0 * (ISA IRQ Select) are not yet programmed. * * The fix for this issue, which will work for any controller * (old or new), is to set ExCA register 03h bits 3:0 = 0001b * (select IRQ1), of the slot, before turning on slot power. * Selecting IRQ1 will result in INT# NOT being asserted * (because IRQ1 is selected), and IRQ1 won't be asserted * because our controllers don't generate IRQ1. * * Other, non O2Micro controllers will generate irq 1 in some * situations, so we can't do this hack for everybody. Reports of * keyboard controller's interrupts being suppressed occurred when * we did this. */ reg = exca_getb(&sc->exca, EXCA_INTR); exca_putb(&sc->exca, EXCA_INTR, (reg & 0xf0) | 1); return (reg); } /* * Restore the damage that cbb_o2micro_power_hack does to EXCA_INTR so * we don't have an interrupt storm on power on. This has the effect of * disabling card status change interrupts for the duration of poweron. */ static void cbb_o2micro_power_hack2(struct cbb_softc *sc, uint8_t reg) { exca_putb(&sc->exca, EXCA_INTR, reg); } int cbb_power(device_t brdev, int volts) { uint32_t status, sock_ctrl, reg_ctrl, mask; struct cbb_softc *sc = device_get_softc(brdev); int cnt, sane; int retval = 0; int on = 0; uint8_t reg = 0; sock_ctrl = cbb_get(sc, CBB_SOCKET_CONTROL); sock_ctrl &= ~CBB_SOCKET_CTRL_VCCMASK; switch (volts & CARD_VCCMASK) { case 5: sock_ctrl |= CBB_SOCKET_CTRL_VCC_5V; on++; break; case 3: sock_ctrl |= CBB_SOCKET_CTRL_VCC_3V; on++; break; case XV: sock_ctrl |= CBB_SOCKET_CTRL_VCC_XV; on++; break; case YV: sock_ctrl |= CBB_SOCKET_CTRL_VCC_YV; on++; break; case 0: break; default: return (0); /* power NEVER changed */ } /* VPP == VCC */ sock_ctrl &= ~CBB_SOCKET_CTRL_VPPMASK; sock_ctrl |= ((sock_ctrl >> 4) & 0x07); if (cbb_get(sc, CBB_SOCKET_CONTROL) == sock_ctrl) return (1); /* no change necessary */ DEVPRINTF((sc->dev, "cbb_power: %dV\n", volts)); if (volts != 0 && sc->chipset == CB_O2MICRO) reg = cbb_o2micro_power_hack(sc); /* * We have to mask the card change detect interrupt while we're * messing with the power. It is allowed to bounce while we're * messing with power as things settle down. In addition, we mask off * the card's function interrupt by routing it via the ISA bus. This * bit generally only affects 16-bit cards. Some bridges allow one to * set another bit to have it also affect 32-bit cards. Since 32-bit * cards are required to be better behaved, we don't bother to get * into those bridge specific features. * * XXX I wonder if we need to enable the READY bit interrupt in the * EXCA CSC register for 16-bit cards, and disable the CD bit? */ mask = cbb_get(sc, CBB_SOCKET_MASK); mask |= CBB_SOCKET_MASK_POWER; mask &= ~CBB_SOCKET_MASK_CD; cbb_set(sc, CBB_SOCKET_MASK, mask); PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL, |CBBM_BRIDGECTRL_INTR_IREQ_ISA_EN, 2); cbb_set(sc, CBB_SOCKET_CONTROL, sock_ctrl); if (on) { mtx_lock(&sc->mtx); cnt = sc->powerintr; /* * We have a shortish timeout of 500ms here. Some bridges do * not generate a POWER_CYCLE event for 16-bit cards. In * those cases, we have to cope the best we can, and having * only a short delay is better than the alternatives. Others * raise the power cycle a smidge before it is really ready. * We deal with those below. */ sane = 10; while (!(cbb_get(sc, CBB_SOCKET_STATE) & CBB_STATE_POWER_CYCLE) && cnt == sc->powerintr && sane-- > 0) msleep(&sc->powerintr, &sc->mtx, 0, "-", hz / 20); mtx_unlock(&sc->mtx); /* * Relax for 100ms. Some bridges appear to assert this signal * right away, but before the card has stabilized. Other * cards need need more time to cope up reliabily. * Experiments with troublesome setups show this to be a * "cheap" way to enhance reliabilty. We need not do this for * "off" since we don't touch the card after we turn it off. */ pause("cbbPwr", min(hz / 10, 1)); /* * The TOPIC95B requires a little bit extra time to get its * act together, so delay for an additional 100ms. Also as * documented below, it doesn't seem to set the POWER_CYCLE * bit, so don't whine if it never came on. */ if (sc->chipset == CB_TOPIC95) pause("cbb95B", hz / 10); else if (sane <= 0) device_printf(sc->dev, "power timeout, doom?\n"); } /* * After the power is good, we can turn off the power interrupt. * However, the PC Card standard says that we must delay turning the * CD bit back on for a bit to allow for bouncyness on power down * (recall that we don't wait above for a power down, since we don't * get an interrupt for that). We're called either from the suspend * code in which case we don't want to turn card change on again, or * we're called from the card insertion code, in which case the cbb * thread will turn it on for us before it waits to be woken by a * change event. * * NB: Topic95B doesn't set the power cycle bit. we assume that * both it and the TOPIC95 behave the same. */ cbb_clrb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_POWER); status = cbb_get(sc, CBB_SOCKET_STATE); if (on && sc->chipset != CB_TOPIC95) { if ((status & CBB_STATE_POWER_CYCLE) == 0) device_printf(sc->dev, "Power not on?\n"); } if (status & CBB_STATE_BAD_VCC_REQ) { device_printf(sc->dev, "Bad Vcc requested\n"); /* * Turn off the power, and try again. Retrigger other * active interrupts via force register. From NetBSD * PR 36652, coded by me to description there. */ sock_ctrl &= ~CBB_SOCKET_CTRL_VCCMASK; sock_ctrl &= ~CBB_SOCKET_CTRL_VPPMASK; cbb_set(sc, CBB_SOCKET_CONTROL, sock_ctrl); status &= ~CBB_STATE_BAD_VCC_REQ; status &= ~CBB_STATE_DATA_LOST; status |= CBB_FORCE_CV_TEST; cbb_set(sc, CBB_SOCKET_FORCE, status); goto done; } if (sc->chipset == CB_TOPIC97) { reg_ctrl = pci_read_config(sc->dev, TOPIC_REG_CTRL, 4); reg_ctrl &= ~TOPIC97_REG_CTRL_TESTMODE; if (on) reg_ctrl |= TOPIC97_REG_CTRL_CLKRUN_ENA; else reg_ctrl &= ~TOPIC97_REG_CTRL_CLKRUN_ENA; pci_write_config(sc->dev, TOPIC_REG_CTRL, reg_ctrl, 4); } retval = 1; done:; if (volts != 0 && sc->chipset == CB_O2MICRO) cbb_o2micro_power_hack2(sc, reg); return (retval); } static int cbb_current_voltage(device_t brdev) { struct cbb_softc *sc = device_get_softc(brdev); uint32_t ctrl; ctrl = cbb_get(sc, CBB_SOCKET_CONTROL); switch (ctrl & CBB_SOCKET_CTRL_VCCMASK) { case CBB_SOCKET_CTRL_VCC_5V: return CARD_5V_CARD; case CBB_SOCKET_CTRL_VCC_3V: return CARD_3V_CARD; case CBB_SOCKET_CTRL_VCC_XV: return CARD_XV_CARD; case CBB_SOCKET_CTRL_VCC_YV: return CARD_YV_CARD; } return 0; } /* * detect the voltage for the card, and set it. Since the power * used is the square of the voltage, lower voltages is a big win * and what Windows does (and what Microsoft prefers). The MS paper * also talks about preferring the CIS entry as well, but that has * to be done elsewhere. We also optimize power sequencing here * and don't change things if we're already powered up at a supported * voltage. * * In addition, we power up with OE disabled. We'll set it later * in the power up sequence. */ static int cbb_do_power(device_t brdev) { struct cbb_softc *sc = device_get_softc(brdev); uint32_t voltage, curpwr; uint32_t status; /* Don't enable OE (output enable) until power stable */ exca_clrb(&sc->exca, EXCA_PWRCTL, EXCA_PWRCTL_OE); voltage = cbb_detect_voltage(brdev); curpwr = cbb_current_voltage(brdev); status = cbb_get(sc, CBB_SOCKET_STATE); if ((status & CBB_STATE_POWER_CYCLE) && (voltage & curpwr)) return 0; /* Prefer lowest voltage supported */ cbb_power(brdev, CARD_OFF); if (voltage & CARD_YV_CARD) cbb_power(brdev, CARD_VCC(YV)); else if (voltage & CARD_XV_CARD) cbb_power(brdev, CARD_VCC(XV)); else if (voltage & CARD_3V_CARD) cbb_power(brdev, CARD_VCC(3)); else if (voltage & CARD_5V_CARD) cbb_power(brdev, CARD_VCC(5)); else { device_printf(brdev, "Unknown card voltage\n"); return (ENXIO); } return (0); } /************************************************************************/ /* CardBus power functions */ /************************************************************************/ static int cbb_cardbus_reset_power(device_t brdev, device_t child, int on) { struct cbb_softc *sc = device_get_softc(brdev); uint32_t b, h; int delay, count, zero_seen, func; /* * Asserting reset for 20ms is necessary for most bridges. For some * reason, the Ricoh RF5C47x bridges need it asserted for 400ms. The * root cause of this is unknown, and NetBSD does the same thing. */ delay = sc->chipset == CB_RF5C47X ? 400 : 20; PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL, |CBBM_BRIDGECTRL_RESET, 2); pause("cbbP3", hz * delay / 1000); /* * If a card exists and we're turning it on, take it out of reset. * After clearing reset, wait up to 1.1s for the first configuration * register (vendor/product) configuration register of device 0.0 to * become != 0xffffffff. The PCMCIA PC Card Host System Specification * says that when powering up the card, the PCI Spec v2.1 must be * followed. In PCI spec v2.2 Table 4-6, Trhfa (Reset High to first * Config Access) is at most 2^25 clocks, or just over 1s. Section * 2.2.1 states any card not ready to participate in bus transactions * must tristate its outputs. Therefore, any access to its * configuration registers must be ignored. In that state, the config * reg will read 0xffffffff. Section 6.2.1 states a vendor id of * 0xffff is invalid, so this can never match a real card. Print a * warning if it never returns a real id. The PCMCIA PC Card * Electrical Spec Section 5.2.7.1 implies only device 0 is present on * a cardbus bus, so that's the only register we check here. */ if (on && CBB_CARD_PRESENT(cbb_get(sc, CBB_SOCKET_STATE))) { PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL, &~CBBM_BRIDGECTRL_RESET, 2); b = pcib_get_bus(child); count = 1100 / 20; do { pause("cbbP4", hz * 2 / 100); } while (PCIB_READ_CONFIG(brdev, b, 0, 0, PCIR_DEVVENDOR, 4) == 0xfffffffful && --count >= 0); if (count < 0) device_printf(brdev, "Warning: Bus reset timeout\n"); /* * Some cards (so far just an atheros card I have) seem to * come out of reset in a funky state. They report they are * multi-function cards, but have nonsense for some of the * higher functions. So if the card claims to be MFDEV, and * any of the higher functions' ID is 0, then we've hit the * bug and we'll try again. */ h = PCIB_READ_CONFIG(brdev, b, 0, 0, PCIR_HDRTYPE, 1); if ((h & PCIM_MFDEV) == 0) return 0; zero_seen = 0; for (func = 1; func < 8; func++) { h = PCIB_READ_CONFIG(brdev, b, 0, func, PCIR_DEVVENDOR, 4); if (h == 0) zero_seen++; } if (!zero_seen) return 0; return (EINVAL); } return 0; } static int cbb_cardbus_power_disable_socket(device_t brdev, device_t child) { cbb_power(brdev, CARD_OFF); cbb_cardbus_reset_power(brdev, child, 0); return (0); } static int cbb_cardbus_power_enable_socket(device_t brdev, device_t child) { struct cbb_softc *sc = device_get_softc(brdev); int err, count; if (!CBB_CARD_PRESENT(cbb_get(sc, CBB_SOCKET_STATE))) return (ENODEV); count = 10; do { err = cbb_do_power(brdev); if (err) return (err); err = cbb_cardbus_reset_power(brdev, child, 1); if (err) { device_printf(brdev, "Reset failed, trying again.\n"); cbb_cardbus_power_disable_socket(brdev, child); pause("cbbErr1", hz / 10); /* wait 100ms */ } } while (err != 0 && count-- > 0); return (0); } /************************************************************************/ /* CardBus Resource */ /************************************************************************/ static void cbb_activate_window(device_t brdev, int type) { PCI_ENABLE_IO(device_get_parent(brdev), brdev, type); } static int cbb_cardbus_io_open(device_t brdev, int win, uint32_t start, uint32_t end) { int basereg; int limitreg; if ((win < 0) || (win > 1)) { DEVPRINTF((brdev, "cbb_cardbus_io_open: window out of range %d\n", win)); return (EINVAL); } basereg = win * 8 + CBBR_IOBASE0; limitreg = win * 8 + CBBR_IOLIMIT0; pci_write_config(brdev, basereg, start, 4); pci_write_config(brdev, limitreg, end, 4); cbb_activate_window(brdev, SYS_RES_IOPORT); return (0); } static int cbb_cardbus_mem_open(device_t brdev, int win, uint32_t start, uint32_t end) { int basereg; int limitreg; if ((win < 0) || (win > 1)) { DEVPRINTF((brdev, "cbb_cardbus_mem_open: window out of range %d\n", win)); return (EINVAL); } basereg = win * 8 + CBBR_MEMBASE0; limitreg = win * 8 + CBBR_MEMLIMIT0; pci_write_config(brdev, basereg, start, 4); pci_write_config(brdev, limitreg, end, 4); cbb_activate_window(brdev, SYS_RES_MEMORY); return (0); } #define START_NONE 0xffffffff #define END_NONE 0 static void cbb_cardbus_auto_open(struct cbb_softc *sc, int type) { uint32_t starts[2]; uint32_t ends[2]; struct cbb_reslist *rle; int align, i; uint32_t reg; starts[0] = starts[1] = START_NONE; ends[0] = ends[1] = END_NONE; if (type == SYS_RES_MEMORY) align = CBB_MEMALIGN; else if (type == SYS_RES_IOPORT) align = CBB_IOALIGN; else align = 1; SLIST_FOREACH(rle, &sc->rl, link) { if (rle->type != type) continue; if (rle->res == NULL) continue; if (!(rman_get_flags(rle->res) & RF_ACTIVE)) continue; if (rman_get_flags(rle->res) & RF_PREFETCHABLE) i = 1; else i = 0; if (rman_get_start(rle->res) < starts[i]) starts[i] = rman_get_start(rle->res); if (rman_get_end(rle->res) > ends[i]) ends[i] = rman_get_end(rle->res); } for (i = 0; i < 2; i++) { if (starts[i] == START_NONE) continue; starts[i] &= ~(align - 1); ends[i] = roundup2(ends[i], align) - 1; } if (starts[0] != START_NONE && starts[1] != START_NONE) { if (starts[0] < starts[1]) { if (ends[0] > starts[1]) { device_printf(sc->dev, "Overlapping ranges" " for prefetch and non-prefetch memory\n"); return; } } else { if (ends[1] > starts[0]) { device_printf(sc->dev, "Overlapping ranges" " for prefetch and non-prefetch memory\n"); return; } } } if (type == SYS_RES_MEMORY) { cbb_cardbus_mem_open(sc->dev, 0, starts[0], ends[0]); cbb_cardbus_mem_open(sc->dev, 1, starts[1], ends[1]); reg = pci_read_config(sc->dev, CBBR_BRIDGECTRL, 2); reg &= ~(CBBM_BRIDGECTRL_PREFETCH_0 | CBBM_BRIDGECTRL_PREFETCH_1); if (starts[1] != START_NONE) reg |= CBBM_BRIDGECTRL_PREFETCH_1; pci_write_config(sc->dev, CBBR_BRIDGECTRL, reg, 2); if (bootverbose) { device_printf(sc->dev, "Opening memory:\n"); if (starts[0] != START_NONE) device_printf(sc->dev, "Normal: %#x-%#x\n", starts[0], ends[0]); if (starts[1] != START_NONE) device_printf(sc->dev, "Prefetch: %#x-%#x\n", starts[1], ends[1]); } } else if (type == SYS_RES_IOPORT) { cbb_cardbus_io_open(sc->dev, 0, starts[0], ends[0]); cbb_cardbus_io_open(sc->dev, 1, starts[1], ends[1]); if (bootverbose && starts[0] != START_NONE) device_printf(sc->dev, "Opening I/O: %#x-%#x\n", starts[0], ends[0]); } } static int cbb_cardbus_activate_resource(device_t brdev, device_t child, int type, int rid, struct resource *res) { int ret; ret = BUS_ACTIVATE_RESOURCE(device_get_parent(brdev), child, type, rid, res); if (ret != 0) return (ret); cbb_cardbus_auto_open(device_get_softc(brdev), type); return (0); } static int cbb_cardbus_deactivate_resource(device_t brdev, device_t child, int type, int rid, struct resource *res) { int ret; ret = BUS_DEACTIVATE_RESOURCE(device_get_parent(brdev), child, type, rid, res); if (ret != 0) return (ret); cbb_cardbus_auto_open(device_get_softc(brdev), type); return (0); } static struct resource * cbb_cardbus_alloc_resource(device_t brdev, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct cbb_softc *sc = device_get_softc(brdev); int tmp; struct resource *res; rman_res_t align; switch (type) { case SYS_RES_IRQ: tmp = rman_get_start(sc->irq_res); if (start > tmp || end < tmp || count != 1) { device_printf(child, "requested interrupt %jd-%jd," "count = %jd not supported by cbb\n", start, end, count); return (NULL); } start = end = tmp; flags |= RF_SHAREABLE; break; case SYS_RES_IOPORT: if (start <= cbb_start_32_io) start = cbb_start_32_io; if (end < start) end = start; if (count > (1 << RF_ALIGNMENT(flags))) flags = (flags & ~RF_ALIGNMENT_MASK) | rman_make_alignment_flags(count); break; case SYS_RES_MEMORY: if (start <= cbb_start_mem) start = cbb_start_mem; if (end < start) end = start; if (count < CBB_MEMALIGN) align = CBB_MEMALIGN; else align = count; if (align > (1 << RF_ALIGNMENT(flags))) flags = (flags & ~RF_ALIGNMENT_MASK) | rman_make_alignment_flags(align); break; } res = BUS_ALLOC_RESOURCE(device_get_parent(brdev), child, type, rid, start, end, count, flags & ~RF_ACTIVE); if (res == NULL) { printf("cbb alloc res fail type %d rid %x\n", type, *rid); return (NULL); } cbb_insert_res(sc, res, type, *rid); if (flags & RF_ACTIVE) if (bus_activate_resource(child, type, *rid, res) != 0) { bus_release_resource(child, type, *rid, res); return (NULL); } return (res); } static int cbb_cardbus_release_resource(device_t brdev, device_t child, int type, int rid, struct resource *res) { struct cbb_softc *sc = device_get_softc(brdev); int error; if (rman_get_flags(res) & RF_ACTIVE) { error = bus_deactivate_resource(child, type, rid, res); if (error != 0) return (error); } cbb_remove_res(sc, res); return (BUS_RELEASE_RESOURCE(device_get_parent(brdev), child, type, rid, res)); } /************************************************************************/ /* PC Card Power Functions */ /************************************************************************/ static int cbb_pcic_power_enable_socket(device_t brdev, device_t child) { struct cbb_softc *sc = device_get_softc(brdev); int err; DPRINTF(("cbb_pcic_socket_enable:\n")); /* power down/up the socket to reset */ err = cbb_do_power(brdev); if (err) return (err); exca_reset(&sc->exca, child); return (0); } static int cbb_pcic_power_disable_socket(device_t brdev, device_t child) { struct cbb_softc *sc = device_get_softc(brdev); DPRINTF(("cbb_pcic_socket_disable\n")); /* Turn off the card's interrupt and leave it in reset, wait 10ms */ exca_putb(&sc->exca, EXCA_INTR, 0); pause("cbbP1", hz / 100); /* power down the socket */ cbb_power(brdev, CARD_OFF); exca_putb(&sc->exca, EXCA_PWRCTL, 0); /* wait 300ms until power fails (Tpf). */ pause("cbbP2", hz * 300 / 1000); /* enable CSC interrupts */ exca_putb(&sc->exca, EXCA_INTR, EXCA_INTR_ENABLE); return (0); } /************************************************************************/ /* POWER methods */ /************************************************************************/ int cbb_power_enable_socket(device_t brdev, device_t child) { struct cbb_softc *sc = device_get_softc(brdev); if (sc->flags & CBB_16BIT_CARD) return (cbb_pcic_power_enable_socket(brdev, child)); return (cbb_cardbus_power_enable_socket(brdev, child)); } int cbb_power_disable_socket(device_t brdev, device_t child) { struct cbb_softc *sc = device_get_softc(brdev); if (sc->flags & CBB_16BIT_CARD) return (cbb_pcic_power_disable_socket(brdev, child)); return (cbb_cardbus_power_disable_socket(brdev, child)); } static int cbb_pcic_activate_resource(device_t brdev, device_t child, int type, int rid, struct resource *res) { struct cbb_softc *sc = device_get_softc(brdev); int error; error = exca_activate_resource(&sc->exca, child, type, rid, res); if (error == 0) cbb_activate_window(brdev, type); return (error); } static int cbb_pcic_deactivate_resource(device_t brdev, device_t child, int type, int rid, struct resource *res) { struct cbb_softc *sc = device_get_softc(brdev); return (exca_deactivate_resource(&sc->exca, child, type, rid, res)); } static struct resource * cbb_pcic_alloc_resource(device_t brdev, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct resource *res = NULL; struct cbb_softc *sc = device_get_softc(brdev); int align; int tmp; switch (type) { case SYS_RES_MEMORY: if (start < cbb_start_mem) start = cbb_start_mem; if (end < start) end = start; if (count < CBB_MEMALIGN) align = CBB_MEMALIGN; else align = count; if (align > (1 << RF_ALIGNMENT(flags))) flags = (flags & ~RF_ALIGNMENT_MASK) | rman_make_alignment_flags(align); break; case SYS_RES_IOPORT: if (start < cbb_start_16_io) start = cbb_start_16_io; if (end < start) end = start; break; case SYS_RES_IRQ: tmp = rman_get_start(sc->irq_res); if (start > tmp || end < tmp || count != 1) { device_printf(child, "requested interrupt %jd-%jd," "count = %jd not supported by cbb\n", start, end, count); return (NULL); } flags |= RF_SHAREABLE; start = end = rman_get_start(sc->irq_res); break; } res = BUS_ALLOC_RESOURCE(device_get_parent(brdev), child, type, rid, start, end, count, flags & ~RF_ACTIVE); if (res == NULL) return (NULL); cbb_insert_res(sc, res, type, *rid); if (flags & RF_ACTIVE) { if (bus_activate_resource(child, type, *rid, res) != 0) { bus_release_resource(child, type, *rid, res); return (NULL); } } return (res); } static int cbb_pcic_release_resource(device_t brdev, device_t child, int type, int rid, struct resource *res) { struct cbb_softc *sc = device_get_softc(brdev); int error; if (rman_get_flags(res) & RF_ACTIVE) { error = bus_deactivate_resource(child, type, rid, res); if (error != 0) return (error); } cbb_remove_res(sc, res); return (BUS_RELEASE_RESOURCE(device_get_parent(brdev), child, type, rid, res)); } /************************************************************************/ /* PC Card methods */ /************************************************************************/ int cbb_pcic_set_res_flags(device_t brdev, device_t child, int type, int rid, u_long flags) { struct cbb_softc *sc = device_get_softc(brdev); struct resource *res; if (type != SYS_RES_MEMORY) return (EINVAL); res = cbb_find_res(sc, type, rid); if (res == NULL) { device_printf(brdev, "set_res_flags: specified rid not found\n"); return (ENOENT); } return (exca_mem_set_flags(&sc->exca, res, flags)); } int cbb_pcic_set_memory_offset(device_t brdev, device_t child, int rid, uint32_t cardaddr, uint32_t *deltap) { struct cbb_softc *sc = device_get_softc(brdev); struct resource *res; res = cbb_find_res(sc, SYS_RES_MEMORY, rid); if (res == NULL) { device_printf(brdev, "set_memory_offset: specified rid not found\n"); return (ENOENT); } return (exca_mem_set_offset(&sc->exca, res, cardaddr, deltap)); } /************************************************************************/ /* BUS Methods */ /************************************************************************/ int cbb_activate_resource(device_t brdev, device_t child, int type, int rid, struct resource *r) { struct cbb_softc *sc = device_get_softc(brdev); if (sc->flags & CBB_16BIT_CARD) return (cbb_pcic_activate_resource(brdev, child, type, rid, r)); else return (cbb_cardbus_activate_resource(brdev, child, type, rid, r)); } int cbb_deactivate_resource(device_t brdev, device_t child, int type, int rid, struct resource *r) { struct cbb_softc *sc = device_get_softc(brdev); if (sc->flags & CBB_16BIT_CARD) return (cbb_pcic_deactivate_resource(brdev, child, type, rid, r)); else return (cbb_cardbus_deactivate_resource(brdev, child, type, rid, r)); } struct resource * cbb_alloc_resource(device_t brdev, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct cbb_softc *sc = device_get_softc(brdev); if (sc->flags & CBB_16BIT_CARD) return (cbb_pcic_alloc_resource(brdev, child, type, rid, start, end, count, flags)); else return (cbb_cardbus_alloc_resource(brdev, child, type, rid, start, end, count, flags)); } int cbb_release_resource(device_t brdev, device_t child, int type, int rid, struct resource *r) { struct cbb_softc *sc = device_get_softc(brdev); if (sc->flags & CBB_16BIT_CARD) return (cbb_pcic_release_resource(brdev, child, type, rid, r)); else return (cbb_cardbus_release_resource(brdev, child, type, rid, r)); } int cbb_read_ivar(device_t brdev, device_t child, int which, uintptr_t *result) { struct cbb_softc *sc = device_get_softc(brdev); switch (which) { case PCIB_IVAR_DOMAIN: *result = sc->domain; return (0); case PCIB_IVAR_BUS: *result = sc->bus.sec; return (0); case EXCA_IVAR_SLOT: *result = 0; return (0); } return (ENOENT); } int cbb_write_ivar(device_t brdev, device_t child, int which, uintptr_t value) { switch (which) { case PCIB_IVAR_DOMAIN: return (EINVAL); case PCIB_IVAR_BUS: return (EINVAL); case EXCA_IVAR_SLOT: return (EINVAL); } return (ENOENT); } int cbb_child_present(device_t parent, device_t child) { struct cbb_softc *sc = (struct cbb_softc *)device_get_softc(parent); uint32_t sockstate; sockstate = cbb_get(sc, CBB_SOCKET_STATE); return (CBB_CARD_PRESENT(sockstate) && sc->cardok); }