/* * Copyright (c) 2017-2018 Cavium, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ * */ /**************************************************************************** * Name: spad_layout.h * * Description: Global definitions * * Created: 01/09/2013 * ****************************************************************************/ /* * Spad Layout NVM CFG MCP public *========================================================================================================== * MCP_REG_SCRATCH REG_RD(MISC_REG_GEN_PURP_CR0) REG_RD(MISC_REG_SHARED_MEM_ADDR) * +------------------+ +-------------------------+ +-------------------+ * | Num Sections(4B)|Currently 4 | Num Sections(4B) | | Num Sections(4B)|Currently 6 * +------------------+ +-------------------------+ +-------------------+ * | Offsize(Trace) |4B -+ +-- | Offset(NVM_CFG1) | | Offsize(drv_mb) | * +-| Offsize(NVM_CFG) |4B | | | (Size is fixed) | | Offsize(mfw_mb) | *+-|-| Offsize(Public) |4B | +-> +-------------------------+ | Offsize(global) | *| | | Offsize(Private) |4B | | | | Offsize(path) | *| | +------------------+ <--+ | nvm_cfg1_glob | | Offsize(port) | *| | | | +-------------------------+ | Offsize(func) | *| | | Trace | | nvm_cfg1_path 0 | +-------------------+ *| +>+------------------+ | nvm_cfg1_path 1 | | drv_mb PF0/2/4..|8 Funcs of engine0 *| | | +-------------------------+ | drv_mb PF1/3/5..|8 Funcs of engine1 *| | NVM_CFG | | nvm_cfg1_port 0 | +-------------------+ *+-> +------------------+ | .... | | mfw_mb PF0/2/4..|8 Funcs of engine0 * | | | nvm_cfg1_port 3 | | mfw_mb PF1/3/5..|8 Funcs of engine1 * | Public Data | +-------------------------+ +-------------------+ * +------------------+ 8 Funcs of Engine 0| nvm_cfg1_func PF0/2/4/..| | | * | | 8 Funcs of Engine 1| nvm_cfg1_func PF1/3/5/..| | public_global | * | Private Data | +-------------------------+ +-------------------+ * +------------------+ | public_path 0 | * | Code | | public_path 1 | * | Static Area | +-------------------+ * +--- ---+ | public_port 0 | * | Code | | .... | * | PIM Area | | public_port 3 | * +------------------+ +-------------------+ * | public_func 0/2/4.|8 Funcs of engine0 * | public_func 1/3/5.|8 Funcs of engine1 * +-------------------+ */ #ifndef SPAD_LAYOUT_H #define SPAD_LAYOUT_H #ifndef MDUMP_PARSE_TOOL #define PORT_0 0 #define PORT_1 1 #define PORT_2 2 #define PORT_3 3 #include "mcp_public.h" #include "mfw_hsi.h" #include "nvm_cfg.h" #ifdef MFW #include "mcp_private.h" #endif extern struct spad_layout g_spad; /* TBD - Consider renaming to MCP_STATIC_SPAD_SIZE, since the real size includes another 64kb */ #define MCP_SPAD_SIZE 0x00028000 /* 160 KB */ #define SPAD_OFFSET(addr) (((u32)addr - (u32)CPU_SPAD_BASE)) #endif /* MDUMP_PARSE_TOOL */ #define TO_OFFSIZE(_offset, _size) \ (u32)((((u32)(_offset) >> 2) << OFFSIZE_OFFSET_OFFSET) | \ (((u32)(_size) >> 2) << OFFSIZE_SIZE_OFFSET)) enum spad_sections { SPAD_SECTION_TRACE, SPAD_SECTION_NVM_CFG, SPAD_SECTION_PUBLIC, SPAD_SECTION_PRIVATE, SPAD_SECTION_MAX /* Cannot be modified anymore since ROM relying on this size !! */ }; #ifndef MDUMP_PARSE_TOOL struct spad_layout { struct nvm_cfg nvm_cfg; struct mcp_public_data public_data; #ifdef MFW /* Drivers will not be compiled with this flag. */ /* Linux should remove this appearance at all. */ struct mcp_private_data private_data; #endif }; #endif /* MDUMP_PARSE_TOOL */ #define STRUCT_OFFSET(f) (STATIC_INIT_BASE + __builtin_offsetof(struct static_init, f)) /* This section is located at a fixed location in the beginning of the scratchpad, * to ensure that the MCP trace is not run over during MFW upgrade. * All the rest of data has a floating location which differs from version to version, * and is pointed by the mcp_meta_data below. * Moreover, the spad_layout section is part of the MFW firmware, and is loaded with it * from nvram in order to clear this portion. */ struct static_init { u32 num_sections; /* 0xe20000 */ offsize_t sections[SPAD_SECTION_MAX]; /* 0xe20004 */ #define SECTION(_sec_) *((offsize_t*)(STRUCT_OFFSET(sections[_sec_]))) #ifdef SECURE_BOOT u32 tim_sha256[8]; /* Used by E5 ROM. Do not relocate */ u32 rom_status_code; /* Used by E5 ROM. Do not relocate */ u32 secure_running_mfw; /* Instead of the one after the trace_buffer */ /* Used by E5 ROM. Do not relocate */ #define SECURE_RUNNING_MFW *((u32*)(STRUCT_OFFSET(secure_running_mfw))) #endif struct mcp_trace trace; /* 0xe20014 */ #ifdef MFW #define MCP_TRACE_P ((struct mcp_trace*)(STRUCT_OFFSET(trace))) u8 trace_buffer[MCP_TRACE_SIZE]; /* 0xe20030 */ #define MCP_TRACE_BUF ((u8*)(STRUCT_OFFSET(trace_buffer))) /* running_mfw has the same definition as in nvm_map.h. * This bit indicate both the running dir, and the running bundle. * It is set once when the LIM is loaded. */ u32 running_mfw; /* 0xe20830 */ #define RUNNING_MFW *((u32*)(STRUCT_OFFSET(running_mfw))) u32 build_time; /* 0xe20834 */ #define MFW_BUILD_TIME *((u32*)(STRUCT_OFFSET(build_time))) u32 reset_type; /* 0xe20838 */ #define RESET_TYPE *((u32*)(STRUCT_OFFSET(reset_type))) u32 mfw_secure_mode; /* 0xe2083c */ #define MFW_SECURE_MODE *((u32*)(STRUCT_OFFSET(mfw_secure_mode))) u16 pme_status_pf_bitmap; /* 0xe20840 */ #define PME_STATUS_PF_BITMAP *((u16*)(STRUCT_OFFSET(pme_status_pf_bitmap))) u16 pme_enable_pf_bitmap; #define PME_ENABLE_PF_BITMAP *((u16*)(STRUCT_OFFSET(pme_enable_pf_bitmap))) u32 mim_nvm_addr; /* 0xe20844 */ u32 mim_start_addr; /* 0xe20848 */ u32 ah_pcie_link_params; /* 0xe20850 Stores PCIe link configuration at start, so they can be used later also for Hot-Reset, without the need to re-reading them from nvm cfg. */ #define AH_PCIE_LINK_PARAMS_LINK_SPEED_MASK (0x000000ff) #define AH_PCIE_LINK_PARAMS_LINK_SPEED_OFFSET (0) #define AH_PCIE_LINK_PARAMS_LINK_WIDTH_MASK (0x0000ff00) #define AH_PCIE_LINK_PARAMS_LINK_WIDTH_OFFSET (8) #define AH_PCIE_LINK_PARAMS_ASPM_MODE_MASK (0x00ff0000) #define AH_PCIE_LINK_PARAMS_ASPM_MODE_OFFSET (16) #define AH_PCIE_LINK_PARAMS_ASPM_CAP_MASK (0xff000000) #define AH_PCIE_LINK_PARAMS_ASPM_CAP_OFFSET (24) #define AH_PCIE_LINK_PARAMS *((u32*)(STRUCT_OFFSET(ah_pcie_link_params))) u32 flags; /* 0xe20850 */ #define M_GLOB_FLAGS *((u32*)(STRUCT_OFFSET(flags))) #define FLAGS_VAUX_REQUIRED (1 << 0) #define FLAGS_WAIT_AVS_READY (1 << 1) #define FLAGS_FAILURE_ISSUED (1 << 2) #define FLAGS_FAILURE_DETECTED (1 << 3) #define FLAGS_VAUX (1 << 4) #define FLAGS_PERST_ASSERT_OCCURED (1 << 5) #define FLAGS_HOT_RESET_STEP2 (1 << 6) #define FLAGS_MSIX_SYNC_ALLOWED (1 << 7) #define FLAGS_PROGRAM_PCI_COMPLETED (1 << 8) #define FLAGS_SMBUS_AUX_MODE (1 << 9) #define FLAGS_PEND_SMBUS_VMAIN_TO_AUX (1 << 10) #define FLAGS_NVM_CFG_EFUSE_FAILURE (1 << 11) #define FLAGS_POWER_TRANSITION (1 << 12) #define FLAGS_MCTP_CHECK_PUMA_TIMEOUT (1 << 13) #define FLAGS_MCTP_TX_PLDM_UPDATE (1 << 14) #define FLAGS_MCTP_SENSOR_EVENT (1 << 15) #define FLAGS_PMBUS_ERROR (1 << 28) #define FLAGS_OS_DRV_LOADED (1 << 29) #define FLAGS_OVER_TEMP_OCCUR (1 << 30) #define FLAGS_FAN_FAIL_OCCUR (1 << 31) u32 rsrv_persist[4]; /* Persist reserved for MFW upgrades */ /* 0xe20854 */ #endif /* MFW */ }; #ifndef MDUMP_PARSE_TOOL #define NVM_CFG1(x) g_spad.nvm_cfg.cfg1.x #define NVM_GLOB(x) NVM_CFG1(glob).x #define NVM_GLOB_VAL(n, m, o) ((NVM_GLOB(n) & m) >> o) #endif /* MDUMP_PARSE_TOOL */ #endif /* SPAD_LAYOUT_H */