/*- * Copyright (c) 2009 Alexander Motin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "siis.h" #include #include #include #include #include #include /* local prototypes */ static int siis_setup_interrupt(device_t dev); static void siis_intr(void *data); static int siis_suspend(device_t dev); static int siis_resume(device_t dev); static int siis_ch_suspend(device_t dev); static int siis_ch_resume(device_t dev); static void siis_ch_intr_locked(void *data); static void siis_ch_intr(void *data); static void siis_begin_transaction(device_t dev, union ccb *ccb); static void siis_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error); static void siis_execute_transaction(struct siis_slot *slot); static void siis_timeout(struct siis_slot *slot); static void siis_end_transaction(struct siis_slot *slot, enum siis_err_type et); static int siis_setup_fis(struct siis_cmd *ctp, union ccb *ccb, int tag); static void siis_dmainit(device_t dev); static void siis_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error); static void siis_dmafini(device_t dev); static void siis_slotsalloc(device_t dev); static void siis_slotsfree(device_t dev); static void siis_reset(device_t dev); static void siis_portinit(device_t dev); static int siis_wait_ready(device_t dev, int t); static int siis_sata_connect(struct siis_channel *ch); static int siis_sata_phy_reset(device_t dev); static void siis_issue_read_log(device_t dev); static void siis_process_read_log(device_t dev, union ccb *ccb); static void siisaction(struct cam_sim *sim, union ccb *ccb); static void siispoll(struct cam_sim *sim); MALLOC_DEFINE(M_SIIS, "SIIS driver", "SIIS driver data buffers"); static int siis_probe(device_t dev) { uint32_t devid = pci_get_devid(dev); if (devid == SIIS_SII3124) { device_set_desc_copy(dev, "SiI3124 SATA2 controller"); } else if (devid == SIIS_SII3132 || devid == SIIS_SII3132_1 || devid == SIIS_SII3132_2) { device_set_desc_copy(dev, "SiI3132 SATA2 controller"); } else if (devid == SIIS_SII3531) { device_set_desc_copy(dev, "SiI3531 SATA2 controller"); } else { return (ENXIO); } return (BUS_PROBE_VENDOR); } static int siis_attach(device_t dev) { struct siis_controller *ctlr = device_get_softc(dev); uint32_t devid = pci_get_devid(dev); device_t child; int error, unit; ctlr->dev = dev; /* Global memory */ ctlr->r_grid = PCIR_BAR(0); if (!(ctlr->r_gmem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &ctlr->r_grid, RF_ACTIVE))) return (ENXIO); /* Channels memory */ ctlr->r_rid = PCIR_BAR(2); if (!(ctlr->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &ctlr->r_rid, RF_ACTIVE))) return (ENXIO); /* Setup our own memory management for channels. */ ctlr->sc_iomem.rm_type = RMAN_ARRAY; ctlr->sc_iomem.rm_descr = "I/O memory addresses"; if ((error = rman_init(&ctlr->sc_iomem)) != 0) { bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem); return (error); } if ((error = rman_manage_region(&ctlr->sc_iomem, rman_get_start(ctlr->r_mem), rman_get_end(ctlr->r_mem))) != 0) { bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem); rman_fini(&ctlr->sc_iomem); return (error); } /* Reset controller */ siis_resume(dev); /* Number of HW channels */ ctlr->channels = (devid == SIIS_SII3124) ? 4 : (devid == SIIS_SII3531 ? 1 : 2); /* Setup interrupts. */ if (siis_setup_interrupt(dev)) { bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem); rman_fini(&ctlr->sc_iomem); return ENXIO; } /* Attach all channels on this controller */ for (unit = 0; unit < ctlr->channels; unit++) { child = device_add_child(dev, "siisch", -1); if (child == NULL) device_printf(dev, "failed to add channel device\n"); else device_set_ivars(child, (void *)(intptr_t)unit); } bus_generic_attach(dev); return 0; } static int siis_detach(device_t dev) { struct siis_controller *ctlr = device_get_softc(dev); device_t *children; int nchildren, i; /* Detach & delete all children */ if (!device_get_children(dev, &children, &nchildren)) { for (i = 0; i < nchildren; i++) device_delete_child(dev, children[i]); free(children, M_TEMP); } /* Free interrupts. */ if (ctlr->irq.r_irq) { bus_teardown_intr(dev, ctlr->irq.r_irq, ctlr->irq.handle); bus_release_resource(dev, SYS_RES_IRQ, ctlr->irq.r_irq_rid, ctlr->irq.r_irq); } pci_release_msi(dev); /* Free memory. */ rman_fini(&ctlr->sc_iomem); bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem); return (0); } static int siis_suspend(device_t dev) { struct siis_controller *ctlr = device_get_softc(dev); bus_generic_suspend(dev); /* Put controller into reset state. */ ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, SIIS_GCTL_GRESET); return 0; } static int siis_resume(device_t dev) { struct siis_controller *ctlr = device_get_softc(dev); /* Put controller into reset state. */ ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, SIIS_GCTL_GRESET); DELAY(10000); /* Get controller out of reset state and enable port interrupts. */ ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, 0x0000000f); return (bus_generic_resume(dev)); } static int siis_setup_interrupt(device_t dev) { struct siis_controller *ctlr = device_get_softc(dev); int msi = 0; /* Process hints. */ resource_int_value(device_get_name(dev), device_get_unit(dev), "msi", &msi); if (msi < 0) msi = 0; else if (msi > 0) msi = min(1, pci_msi_count(dev)); /* Allocate MSI if needed/present. */ if (msi && pci_alloc_msi(dev, &msi) != 0) msi = 0; /* Allocate all IRQs. */ ctlr->irq.r_irq_rid = msi ? 1 : 0; if (!(ctlr->irq.r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &ctlr->irq.r_irq_rid, RF_SHAREABLE | RF_ACTIVE))) { device_printf(dev, "unable to map interrupt\n"); return ENXIO; } if ((bus_setup_intr(dev, ctlr->irq.r_irq, ATA_INTR_FLAGS, NULL, siis_intr, ctlr, &ctlr->irq.handle))) { /* SOS XXX release r_irq */ device_printf(dev, "unable to setup interrupt\n"); return ENXIO; } return (0); } /* * Common case interrupt handler. */ static void siis_intr(void *data) { struct siis_controller *ctlr = (struct siis_controller *)data; u_int32_t is; void *arg; int unit; is = ATA_INL(ctlr->r_gmem, SIIS_IS); for (unit = 0; unit < ctlr->channels; unit++) { if ((is & SIIS_IS_PORT(unit)) != 0 && (arg = ctlr->interrupt[unit].argument)) { ctlr->interrupt[unit].function(arg); } } } static struct resource * siis_alloc_resource(device_t dev, device_t child, int type, int *rid, u_long start, u_long end, u_long count, u_int flags) { struct siis_controller *ctlr = device_get_softc(dev); int unit = ((struct siis_channel *)device_get_softc(child))->unit; struct resource *res = NULL; int offset = unit << 13; long st; switch (type) { case SYS_RES_MEMORY: st = rman_get_start(ctlr->r_mem); res = rman_reserve_resource(&ctlr->sc_iomem, st + offset, st + offset + 0x2000, 0x2000, RF_ACTIVE, child); if (res) { bus_space_handle_t bsh; bus_space_tag_t bst; bsh = rman_get_bushandle(ctlr->r_mem); bst = rman_get_bustag(ctlr->r_mem); bus_space_subregion(bst, bsh, offset, 0x2000, &bsh); rman_set_bushandle(res, bsh); rman_set_bustag(res, bst); } break; case SYS_RES_IRQ: if (*rid == ATA_IRQ_RID) res = ctlr->irq.r_irq; break; } return (res); } static int siis_release_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { switch (type) { case SYS_RES_MEMORY: rman_release_resource(r); return (0); case SYS_RES_IRQ: if (rid != ATA_IRQ_RID) return ENOENT; return (0); } return (EINVAL); } static int siis_setup_intr(device_t dev, device_t child, struct resource *irq, int flags, driver_filter_t *filter, driver_intr_t *function, void *argument, void **cookiep) { struct siis_controller *ctlr = device_get_softc(dev); int unit = (intptr_t)device_get_ivars(child); if (filter != NULL) { printf("siis.c: we cannot use a filter here\n"); return (EINVAL); } ctlr->interrupt[unit].function = function; ctlr->interrupt[unit].argument = argument; return (0); } static int siis_teardown_intr(device_t dev, device_t child, struct resource *irq, void *cookie) { struct siis_controller *ctlr = device_get_softc(dev); int unit = (intptr_t)device_get_ivars(child); ctlr->interrupt[unit].function = NULL; ctlr->interrupt[unit].argument = NULL; return (0); } static int siis_print_child(device_t dev, device_t child) { int retval; retval = bus_print_child_header(dev, child); retval += printf(" at channel %d", (int)(intptr_t)device_get_ivars(child)); retval += bus_print_child_footer(dev, child); return (retval); } devclass_t siis_devclass; static device_method_t siis_methods[] = { DEVMETHOD(device_probe, siis_probe), DEVMETHOD(device_attach, siis_attach), DEVMETHOD(device_detach, siis_detach), DEVMETHOD(device_suspend, siis_suspend), DEVMETHOD(device_resume, siis_resume), DEVMETHOD(bus_print_child, siis_print_child), DEVMETHOD(bus_alloc_resource, siis_alloc_resource), DEVMETHOD(bus_release_resource, siis_release_resource), DEVMETHOD(bus_setup_intr, siis_setup_intr), DEVMETHOD(bus_teardown_intr,siis_teardown_intr), { 0, 0 } }; static driver_t siis_driver = { "siis", siis_methods, sizeof(struct siis_controller) }; DRIVER_MODULE(siis, pci, siis_driver, siis_devclass, 0, 0); MODULE_VERSION(siis, 1); MODULE_DEPEND(siis, cam, 1, 1, 1); static int siis_ch_probe(device_t dev) { device_set_desc_copy(dev, "SIIS channel"); return (0); } static int siis_ch_attach(device_t dev) { struct siis_channel *ch = device_get_softc(dev); struct cam_devq *devq; int rid, error; ch->dev = dev; ch->unit = (intptr_t)device_get_ivars(dev); resource_int_value(device_get_name(dev), device_get_unit(dev), "pm_level", &ch->pm_level); resource_int_value(device_get_name(dev), device_get_unit(dev), "sata_rev", &ch->sata_rev); mtx_init(&ch->mtx, "SIIS channel lock", NULL, MTX_DEF); rid = ch->unit; if (!(ch->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE))) return (ENXIO); siis_dmainit(dev); siis_slotsalloc(dev); siis_ch_resume(dev); mtx_lock(&ch->mtx); rid = ATA_IRQ_RID; if (!(ch->r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE))) { bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem); device_printf(dev, "Unable to map interrupt\n"); return (ENXIO); } if ((bus_setup_intr(dev, ch->r_irq, ATA_INTR_FLAGS, NULL, siis_ch_intr_locked, dev, &ch->ih))) { device_printf(dev, "Unable to setup interrupt\n"); error = ENXIO; goto err1; } /* Create the device queue for our SIM. */ devq = cam_simq_alloc(SIIS_MAX_SLOTS); if (devq == NULL) { device_printf(dev, "Unable to allocate simq\n"); error = ENOMEM; goto err1; } /* Construct SIM entry */ ch->sim = cam_sim_alloc(siisaction, siispoll, "siisch", ch, device_get_unit(dev), &ch->mtx, SIIS_MAX_SLOTS, 0, devq); if (ch->sim == NULL) { device_printf(dev, "unable to allocate sim\n"); error = ENOMEM; goto err2; } if (xpt_bus_register(ch->sim, dev, 0) != CAM_SUCCESS) { device_printf(dev, "unable to register xpt bus\n"); error = ENXIO; goto err2; } if (xpt_create_path(&ch->path, /*periph*/NULL, cam_sim_path(ch->sim), CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { device_printf(dev, "unable to create path\n"); error = ENXIO; goto err3; } mtx_unlock(&ch->mtx); return (0); err3: xpt_bus_deregister(cam_sim_path(ch->sim)); err2: cam_sim_free(ch->sim, /*free_devq*/TRUE); err1: bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq); bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem); mtx_unlock(&ch->mtx); return (error); } static int siis_ch_detach(device_t dev) { struct siis_channel *ch = device_get_softc(dev); mtx_lock(&ch->mtx); xpt_async(AC_LOST_DEVICE, ch->path, NULL); xpt_free_path(ch->path); xpt_bus_deregister(cam_sim_path(ch->sim)); cam_sim_free(ch->sim, /*free_devq*/TRUE); mtx_unlock(&ch->mtx); bus_teardown_intr(dev, ch->r_irq, ch->ih); bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq); siis_ch_suspend(dev); siis_slotsfree(dev); siis_dmafini(dev); bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem); mtx_destroy(&ch->mtx); return (0); } static int siis_ch_suspend(device_t dev) { struct siis_channel *ch = device_get_softc(dev); /* Put port into reset state. */ ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_RESET); return (0); } static int siis_ch_resume(device_t dev) { struct siis_channel *ch = device_get_softc(dev); /* Get port out of reset state. */ ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PORT_RESET); ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_32BIT); ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME); /* Enable port interrupts */ ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED); return (0); } devclass_t siisch_devclass; static device_method_t siisch_methods[] = { DEVMETHOD(device_probe, siis_ch_probe), DEVMETHOD(device_attach, siis_ch_attach), DEVMETHOD(device_detach, siis_ch_detach), DEVMETHOD(device_suspend, siis_ch_suspend), DEVMETHOD(device_resume, siis_ch_resume), { 0, 0 } }; static driver_t siisch_driver = { "siisch", siisch_methods, sizeof(struct siis_channel) }; DRIVER_MODULE(siisch, siis, siisch_driver, siis_devclass, 0, 0); struct siis_dc_cb_args { bus_addr_t maddr; int error; }; static void siis_dmainit(device_t dev) { struct siis_channel *ch = device_get_softc(dev); struct siis_dc_cb_args dcba; /* Command area. */ if (bus_dma_tag_create(bus_get_dma_tag(dev), 1024, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, SIIS_WORK_SIZE, 1, SIIS_WORK_SIZE, 0, NULL, NULL, &ch->dma.work_tag)) goto error; if (bus_dmamem_alloc(ch->dma.work_tag, (void **)&ch->dma.work, 0, &ch->dma.work_map)) goto error; if (bus_dmamap_load(ch->dma.work_tag, ch->dma.work_map, ch->dma.work, SIIS_WORK_SIZE, siis_dmasetupc_cb, &dcba, 0) || dcba.error) { bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map); goto error; } ch->dma.work_bus = dcba.maddr; /* Data area. */ if (bus_dma_tag_create(bus_get_dma_tag(dev), 2, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, SIIS_SG_ENTRIES * PAGE_SIZE * SIIS_MAX_SLOTS, SIIS_SG_ENTRIES, 0xFFFFFFFF, 0, busdma_lock_mutex, &ch->mtx, &ch->dma.data_tag)) { goto error; } return; error: device_printf(dev, "WARNING - DMA initialization failed\n"); siis_dmafini(dev); } static void siis_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error) { struct siis_dc_cb_args *dcba = (struct siis_dc_cb_args *)xsc; if (!(dcba->error = error)) dcba->maddr = segs[0].ds_addr; } static void siis_dmafini(device_t dev) { struct siis_channel *ch = device_get_softc(dev); if (ch->dma.data_tag) { bus_dma_tag_destroy(ch->dma.data_tag); ch->dma.data_tag = NULL; } if (ch->dma.work_bus) { bus_dmamap_unload(ch->dma.work_tag, ch->dma.work_map); bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map); ch->dma.work_bus = 0; ch->dma.work_map = NULL; ch->dma.work = NULL; } if (ch->dma.work_tag) { bus_dma_tag_destroy(ch->dma.work_tag); ch->dma.work_tag = NULL; } } static void siis_slotsalloc(device_t dev) { struct siis_channel *ch = device_get_softc(dev); int i; /* Alloc and setup command/dma slots */ bzero(ch->slot, sizeof(ch->slot)); for (i = 0; i < SIIS_MAX_SLOTS; i++) { struct siis_slot *slot = &ch->slot[i]; slot->dev = dev; slot->slot = i; slot->state = SIIS_SLOT_EMPTY; slot->ccb = NULL; callout_init_mtx(&slot->timeout, &ch->mtx, 0); if (bus_dmamap_create(ch->dma.data_tag, 0, &slot->dma.data_map)) device_printf(ch->dev, "FAILURE - create data_map\n"); } } static void siis_slotsfree(device_t dev) { struct siis_channel *ch = device_get_softc(dev); int i; /* Free all dma slots */ for (i = 0; i < SIIS_MAX_SLOTS; i++) { struct siis_slot *slot = &ch->slot[i]; if (slot->dma.data_map) { bus_dmamap_destroy(ch->dma.data_tag, slot->dma.data_map); slot->dma.data_map = NULL; } } } static void siis_phy_check_events(device_t dev) { struct siis_channel *ch = device_get_softc(dev); /* If we have a connection event, deal with it */ if (ch->pm_level == 0) { u_int32_t status = ATA_INL(ch->r_mem, SIIS_P_SSTS); if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) && ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) && ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) { if (bootverbose) device_printf(dev, "CONNECT requested\n"); siis_reset(dev); } else { if (bootverbose) device_printf(dev, "DISCONNECT requested\n"); ch->devices = 0; } } } static void siis_ch_intr_locked(void *data) { device_t dev = (device_t)data; struct siis_channel *ch = device_get_softc(dev); mtx_lock(&ch->mtx); siis_ch_intr(data); mtx_unlock(&ch->mtx); } static void siis_ch_intr(void *data) { device_t dev = (device_t)data; struct siis_channel *ch = device_get_softc(dev); uint32_t istatus, sstatus, ctx, estatus, ok, err = 0; enum siis_err_type et; int i, ccs, port, tslots; mtx_assert(&ch->mtx, MA_OWNED); /* Read command statuses. */ sstatus = ATA_INL(ch->r_mem, SIIS_P_SS); ok = ch->rslots & ~sstatus; /* Complete all successfull commands. */ for (i = 0; i < SIIS_MAX_SLOTS; i++) { if ((ok >> i) & 1) siis_end_transaction(&ch->slot[i], SIIS_ERR_NONE); } /* Do we have any other events? */ if ((sstatus & SIIS_P_SS_ATTN) == 0) return; /* Read and clear interrupt statuses. */ istatus = ATA_INL(ch->r_mem, SIIS_P_IS) & (0xFFFF & ~SIIS_P_IX_COMMCOMP); ATA_OUTL(ch->r_mem, SIIS_P_IS, istatus); /* Process PHY events */ if (istatus & SIIS_P_IX_PHYRDYCHG) siis_phy_check_events(dev); /* Process command errors */ if (istatus & SIIS_P_IX_COMMERR) { estatus = ATA_INL(ch->r_mem, SIIS_P_CMDERR); ctx = ATA_INL(ch->r_mem, SIIS_P_CTX); ccs = (ctx & SIIS_P_CTX_SLOT) >> SIIS_P_CTX_SLOT_SHIFT; port = (ctx & SIIS_P_CTX_PMP) >> SIIS_P_CTX_PMP_SHIFT; err = ch->rslots & sstatus; //device_printf(dev, "%s ERROR ss %08x is %08x rs %08x es %d act %d port %d serr %08x\n", // __func__, sstatus, istatus, ch->rslots, estatus, ccs, port, // ATA_INL(ch->r_mem, SIIS_P_SERR)); if (!ch->readlog && !ch->recovery) { xpt_freeze_simq(ch->sim, ch->numrslots); ch->recovery = 1; } if (ch->frozen) { union ccb *fccb = ch->frozen; ch->frozen = NULL; fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; xpt_done(fccb); } if (estatus == SIIS_P_CMDERR_DEV || estatus == SIIS_P_CMDERR_SDB || estatus == SIIS_P_CMDERR_DATAFIS) { tslots = ch->numtslots[port]; for (i = 0; i < SIIS_MAX_SLOTS; i++) { /* XXX: reqests in loading state. */ if (((ch->rslots >> i) & 1) == 0) continue; if (ch->slot[i].ccb->ccb_h.target_id != port) continue; if (tslots == 0) { /* Untagged operation. */ if (i == ccs) et = SIIS_ERR_TFE; else et = SIIS_ERR_INNOCENT; } else { /* Tagged operation. */ et = SIIS_ERR_NCQ; } siis_end_transaction(&ch->slot[i], et); } /* * We can't reinit port if there are some other * commands active, use resume to complete them. */ if (ch->rslots != 0) ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_RESUME); } else { if (estatus == SIIS_P_CMDERR_SENDFIS || estatus == SIIS_P_CMDERR_INCSTATE || estatus == SIIS_P_CMDERR_PPE || estatus == SIIS_P_CMDERR_SERVICE) { et = SIIS_ERR_SATA; } else et = SIIS_ERR_INVALID; for (i = 0; i < SIIS_MAX_SLOTS; i++) { /* XXX: reqests in loading state. */ if (((ch->rslots >> i) & 1) == 0) continue; siis_end_transaction(&ch->slot[i], et); } } } } /* Must be called with channel locked. */ static int siis_check_collision(device_t dev, union ccb *ccb) { struct siis_channel *ch = device_get_softc(dev); mtx_assert(&ch->mtx, MA_OWNED); if ((ccb->ccb_h.func_code == XPT_ATA_IO) && (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) { /* Atomic command while anything active. */ if (ch->numrslots != 0) return (1); } /* We have some atomic command running. */ if (ch->aslots != 0) return (1); return (0); } /* Must be called with channel locked. */ static void siis_begin_transaction(device_t dev, union ccb *ccb) { struct siis_channel *ch = device_get_softc(dev); struct siis_slot *slot; int tag; mtx_assert(&ch->mtx, MA_OWNED); /* Choose empty slot. */ tag = ch->lastslot; do { tag++; if (tag >= SIIS_MAX_SLOTS) tag = 0; if (ch->slot[tag].state == SIIS_SLOT_EMPTY) break; } while (tag != ch->lastslot); if (ch->slot[tag].state != SIIS_SLOT_EMPTY) device_printf(ch->dev, "ALL SLOTS BUSY!\n"); ch->lastslot = tag; /* Occupy chosen slot. */ slot = &ch->slot[tag]; slot->ccb = ccb; /* Update channel stats. */ ch->numrslots++; if ((ccb->ccb_h.func_code == XPT_ATA_IO) && (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { ch->numtslots[ccb->ccb_h.target_id]++; } if ((ccb->ccb_h.func_code == XPT_ATA_IO) && (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) ch->aslots |= (1 << slot->slot); slot->dma.nsegs = 0; /* If request moves data, setup and load SG list */ if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { void *buf; bus_size_t size; slot->state = SIIS_SLOT_LOADING; if (ccb->ccb_h.func_code == XPT_ATA_IO) { buf = ccb->ataio.data_ptr; size = ccb->ataio.dxfer_len; } else { buf = ccb->csio.data_ptr; size = ccb->csio.dxfer_len; } bus_dmamap_load(ch->dma.data_tag, slot->dma.data_map, buf, size, siis_dmasetprd, slot, 0); } else siis_execute_transaction(slot); } /* Locked by busdma engine. */ static void siis_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error) { struct siis_slot *slot = arg; struct siis_channel *ch = device_get_softc(slot->dev); struct siis_cmd *ctp; struct siis_dma_prd *prd; int i; mtx_assert(&ch->mtx, MA_OWNED); if (error) { device_printf(slot->dev, "DMA load error\n"); if (!ch->readlog) xpt_freeze_simq(ch->sim, 1); siis_end_transaction(slot, SIIS_ERR_INVALID); return; } KASSERT(nsegs <= SIIS_SG_ENTRIES, ("too many DMA segment entries\n")); /* Get a piece of the workspace for this request */ ctp = (struct siis_cmd *) (ch->dma.work + SIIS_CT_OFFSET + (SIIS_CT_SIZE * slot->slot)); /* Fill S/G table */ if (slot->ccb->ccb_h.func_code == XPT_ATA_IO) prd = &ctp->u.ata.prd[0]; else prd = &ctp->u.atapi.prd[0]; for (i = 0; i < nsegs; i++) { prd[i].dba = htole64(segs[i].ds_addr); prd[i].dbc = htole32(segs[i].ds_len); prd[i].control = 0; } prd[nsegs - 1].control = htole32(SIIS_PRD_TRM); slot->dma.nsegs = nsegs; bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map, ((slot->ccb->ccb_h.flags & CAM_DIR_IN) ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE)); siis_execute_transaction(slot); } /* Must be called with channel locked. */ static void siis_execute_transaction(struct siis_slot *slot) { device_t dev = slot->dev; struct siis_channel *ch = device_get_softc(dev); struct siis_cmd *ctp; union ccb *ccb = slot->ccb; u_int64_t prb_bus; mtx_assert(&ch->mtx, MA_OWNED); /* Get a piece of the workspace for this request */ ctp = (struct siis_cmd *) (ch->dma.work + SIIS_CT_OFFSET + (SIIS_CT_SIZE * slot->slot)); ctp->control = 0; ctp->protocol_override = 0; ctp->transfer_count = 0; /* Special handling for Soft Reset command. */ if ((ccb->ccb_h.func_code == XPT_ATA_IO) && (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL)) { ctp->control |= htole16(SIIS_PRB_SOFT_RESET); } else if (ccb->ccb_h.func_code == XPT_SCSI_IO) { if (ccb->ccb_h.flags & CAM_DIR_IN) ctp->control |= htole16(SIIS_PRB_PACKET_READ); if (ccb->ccb_h.flags & CAM_DIR_OUT) ctp->control |= htole16(SIIS_PRB_PACKET_WRITE); } /* Setup the FIS for this request */ if (!siis_setup_fis(ctp, ccb, slot->slot)) { device_printf(ch->dev, "Setting up SATA FIS failed\n"); if (!ch->readlog) xpt_freeze_simq(ch->sim, 1); siis_end_transaction(slot, SIIS_ERR_INVALID); return; } bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map, BUS_DMASYNC_PREWRITE); /* Issue command to the controller. */ slot->state = SIIS_SLOT_RUNNING; ch->rslots |= (1 << slot->slot); prb_bus = ch->dma.work_bus + SIIS_CT_OFFSET + (SIIS_CT_SIZE * slot->slot); ATA_OUTL(ch->r_mem, SIIS_P_CACTL(slot->slot), prb_bus); ATA_OUTL(ch->r_mem, SIIS_P_CACTH(slot->slot), prb_bus >> 32); /* Start command execution timeout */ callout_reset(&slot->timeout, (int)ccb->ccb_h.timeout * hz / 1000, (timeout_t*)siis_timeout, slot); return; } /* Locked by callout mechanism. */ static void siis_timeout(struct siis_slot *slot) { device_t dev = slot->dev; struct siis_channel *ch = device_get_softc(dev); int i; mtx_assert(&ch->mtx, MA_OWNED); device_printf(dev, "Timeout on slot %d\n", slot->slot); device_printf(dev, "%s is %08x ss %08x rs %08x es %08x sts %08x serr %08x\n", __func__, ATA_INL(ch->r_mem, SIIS_P_IS), ATA_INL(ch->r_mem, SIIS_P_SS), ch->rslots, ATA_INL(ch->r_mem, SIIS_P_CMDERR), ATA_INL(ch->r_mem, SIIS_P_STS), ATA_INL(ch->r_mem, SIIS_P_SERR)); /* Kick controller into sane state. */ siis_portinit(ch->dev); if (!ch->readlog) xpt_freeze_simq(ch->sim, ch->numrslots); /* Handle command with timeout. */ siis_end_transaction(&ch->slot[slot->slot], SIIS_ERR_TIMEOUT); /* Handle the rest of commands. */ if (ch->frozen) { union ccb *fccb = ch->frozen; ch->frozen = NULL; fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; xpt_done(fccb); } for (i = 0; i < SIIS_MAX_SLOTS; i++) { /* Do we have a running request on slot? */ if (ch->slot[i].state < SIIS_SLOT_RUNNING) continue; siis_end_transaction(&ch->slot[i], SIIS_ERR_INNOCENT); } } /* Must be called with channel locked. */ static void siis_end_transaction(struct siis_slot *slot, enum siis_err_type et) { device_t dev = slot->dev; struct siis_channel *ch = device_get_softc(dev); union ccb *ccb = slot->ccb; mtx_assert(&ch->mtx, MA_OWNED); /* Cancel command execution timeout */ callout_stop(&slot->timeout); bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map, BUS_DMASYNC_POSTWRITE); /* Read result registers to the result struct * May be incorrect if several commands finished same time, * so read only when sure or have to. */ if (ccb->ccb_h.func_code == XPT_ATA_IO) { struct ata_res *res = &ccb->ataio.res; if ((et == SIIS_ERR_TFE) || (ccb->ataio.cmd.flags & CAM_ATAIO_NEEDRESULT)) { int offs = SIIS_P_LRAM_SLOT(slot->slot) + 8; res->status = ATA_INB(ch->r_mem, offs + 2); res->error = ATA_INB(ch->r_mem, offs + 3); res->lba_low = ATA_INB(ch->r_mem, offs + 4); res->lba_mid = ATA_INB(ch->r_mem, offs + 5); res->lba_high = ATA_INB(ch->r_mem, offs + 6); res->device = ATA_INB(ch->r_mem, offs + 7); res->lba_low_exp = ATA_INB(ch->r_mem, offs + 8); res->lba_mid_exp = ATA_INB(ch->r_mem, offs + 9); res->lba_high_exp = ATA_INB(ch->r_mem, offs + 10); res->sector_count = ATA_INB(ch->r_mem, offs + 12); res->sector_count_exp = ATA_INB(ch->r_mem, offs + 13); } else bzero(res, sizeof(*res)); } if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map, (ccb->ccb_h.flags & CAM_DIR_IN) ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(ch->dma.data_tag, slot->dma.data_map); } /* Set proper result status. */ ccb->ccb_h.status &= ~CAM_STATUS_MASK; if (et != SIIS_ERR_NONE || ch->recovery) { ch->eslots |= (1 << slot->slot); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; } switch (et) { case SIIS_ERR_NONE: ccb->ccb_h.status |= CAM_REQ_CMP; if (ccb->ccb_h.func_code == XPT_SCSI_IO) ccb->csio.scsi_status = SCSI_STATUS_OK; break; case SIIS_ERR_INVALID: ccb->ccb_h.status |= CAM_REQ_INVALID; break; case SIIS_ERR_INNOCENT: ccb->ccb_h.status |= CAM_REQUEUE_REQ; break; case SIIS_ERR_TFE: if (ccb->ccb_h.func_code == XPT_SCSI_IO) { ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; } else { ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR; } break; case SIIS_ERR_SATA: ccb->ccb_h.status |= CAM_UNCOR_PARITY; break; case SIIS_ERR_TIMEOUT: ccb->ccb_h.status |= CAM_CMD_TIMEOUT; break; case SIIS_ERR_NCQ: ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR; break; default: ccb->ccb_h.status |= CAM_REQ_CMP_ERR; } /* Free slot. */ ch->rslots &= ~(1 << slot->slot); ch->aslots &= ~(1 << slot->slot); slot->state = SIIS_SLOT_EMPTY; slot->ccb = NULL; /* Update channel stats. */ ch->numrslots--; if ((ccb->ccb_h.func_code == XPT_ATA_IO) && (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { ch->numtslots[ccb->ccb_h.target_id]--; } /* If it was NCQ command error, put result on hold. */ if (et == SIIS_ERR_NCQ) { ch->hold[slot->slot] = ccb; ch->numhslots++; } else if (ch->readlog) /* If it was our READ LOG command - process it. */ siis_process_read_log(dev, ccb); else xpt_done(ccb); /* Unfreeze frozen command. */ if (ch->frozen && ch->numrslots == 0) { union ccb *fccb = ch->frozen; ch->frozen = NULL; siis_begin_transaction(dev, fccb); xpt_release_simq(ch->sim, TRUE); } /* If we have no other active commands, ... */ if (ch->rslots == 0) { /* if we have slots in error, we can reinit port. */ if (ch->eslots != 0) siis_portinit(dev); /* if there commands on hold, we can do READ LOG. */ if (!ch->readlog && ch->numhslots) siis_issue_read_log(dev); } } static void siis_issue_read_log(device_t dev) { struct siis_channel *ch = device_get_softc(dev); union ccb *ccb; struct ccb_ataio *ataio; int i; /* Find some holden command. */ for (i = 0; i < SIIS_MAX_SLOTS; i++) { if (ch->hold[i]) break; } if (i == SIIS_MAX_SLOTS) return; ch->readlog = 1; ccb = xpt_alloc_ccb_nowait(); if (ccb == NULL) { device_printf(dev, "Unable allocate READ LOG command"); return; /* XXX */ } ccb->ccb_h = ch->hold[i]->ccb_h; /* Reuse old header. */ ccb->ccb_h.func_code = XPT_ATA_IO; ccb->ccb_h.flags = CAM_DIR_IN; ccb->ccb_h.timeout = 1000; /* 1s should be enough. */ ataio = &ccb->ataio; ataio->data_ptr = malloc(512, M_SIIS, M_NOWAIT); if (ataio->data_ptr == NULL) { device_printf(dev, "Unable allocate memory for READ LOG command"); return; /* XXX */ } ataio->dxfer_len = 512; bzero(&ataio->cmd, sizeof(ataio->cmd)); ataio->cmd.flags = CAM_ATAIO_48BIT; ataio->cmd.command = 0x2F; /* READ LOG EXT */ ataio->cmd.sector_count = 1; ataio->cmd.sector_count_exp = 0; ataio->cmd.lba_low = 0x10; ataio->cmd.lba_mid = 0; ataio->cmd.lba_mid_exp = 0; siis_begin_transaction(dev, ccb); } static void siis_process_read_log(device_t dev, union ccb *ccb) { struct siis_channel *ch = device_get_softc(dev); uint8_t *data; struct ata_res *res; int i; ch->readlog = 0; data = ccb->ataio.data_ptr; if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP && (data[0] & 0x80) == 0) { for (i = 0; i < SIIS_MAX_SLOTS; i++) { if (!ch->hold[i]) continue; if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id) continue; if ((data[0] & 0x1F) == i) { res = &ch->hold[i]->ataio.res; res->status = data[2]; res->error = data[3]; res->lba_low = data[4]; res->lba_mid = data[5]; res->lba_high = data[6]; res->device = data[7]; res->lba_low_exp = data[8]; res->lba_mid_exp = data[9]; res->lba_high_exp = data[10]; res->sector_count = data[12]; res->sector_count_exp = data[13]; } else { ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; ch->hold[i]->ccb_h.status |= CAM_REQUEUE_REQ; } xpt_done(ch->hold[i]); ch->hold[i] = NULL; ch->numhslots--; } } else { if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) device_printf(dev, "Error while READ LOG EXT\n"); else if ((data[0] & 0x80) == 0) { device_printf(dev, "Non-queued command error in READ LOG EXT\n"); } for (i = 0; i < SIIS_MAX_SLOTS; i++) { if (!ch->hold[i]) continue; if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id) continue; xpt_done(ch->hold[i]); ch->hold[i] = NULL; ch->numhslots--; } } free(ccb->ataio.data_ptr, M_SIIS); xpt_free_ccb(ccb); } static void siis_portinit(device_t dev) { struct siis_channel *ch = device_get_softc(dev); int i; ch->eslots = 0; ch->recovery = 0; ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_RESUME); for (i = 0; i < 16; i++) { ATA_OUTL(ch->r_mem, SIIS_P_PMPSTS(i), 0), ATA_OUTL(ch->r_mem, SIIS_P_PMPQACT(i), 0); } ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_INIT); siis_wait_ready(dev, 1000); } #if 0 static void siis_devreset(device_t dev) { struct siis_channel *ch = device_get_softc(dev); ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_DEV_RESET); siis_wait_ready(dev, 1000); } #endif static int siis_wait_ready(device_t dev, int t) { struct siis_channel *ch = device_get_softc(dev); int timeout = 0; uint32_t val; while (((val = ATA_INL(ch->r_mem, SIIS_P_STS)) & SIIS_P_CTL_READY) == 0) { DELAY(1000); if (timeout++ > t) { device_printf(dev, "port is not ready (timeout %dms) " "status = %08x\n", t, val); return (EBUSY); } } if (bootverbose) device_printf(dev, "ready wait time=%dms\n", timeout); return (0); } static void siis_reset(device_t dev) { struct siis_channel *ch = device_get_softc(dev); int i; if (bootverbose) device_printf(dev, "SIIS reset...\n"); xpt_freeze_simq(ch->sim, ch->numrslots); /* Requeue freezed command. */ if (ch->frozen) { union ccb *fccb = ch->frozen; ch->frozen = NULL; fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; xpt_done(fccb); } /* Disable port interrupts */ ATA_OUTL(ch->r_mem, SIIS_P_IECLR, 0x0000FFFF); /* Kill the engine and requeue all running commands. */ siis_portinit(dev); for (i = 0; i < SIIS_MAX_SLOTS; i++) { /* Do we have a running request on slot? */ if (ch->slot[i].state < SIIS_SLOT_RUNNING) continue; /* XXX; Commands in loading state. */ siis_end_transaction(&ch->slot[i], SIIS_ERR_INNOCENT); } ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME); /* Reset and reconnect PHY, */ if (!siis_sata_phy_reset(dev)) { ch->devices = 0; /* Enable port interrupts */ ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED); if (bootverbose) device_printf(dev, "SIIS reset done: phy reset found no device\n"); /* Tell the XPT about the event */ xpt_async(AC_BUS_RESET, ch->path, NULL); return; } /* Wait for clearing busy status. */ if (siis_wait_ready(dev, 10000)) { device_printf(dev, "device ready timeout\n"); } ch->devices = 1; /* Enable port interrupts */ ATA_OUTL(ch->r_mem, SIIS_P_IS, 0xFFFFFFFF); ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED); if (bootverbose) device_printf(dev, "SIIS reset done: devices=%08x\n", ch->devices); /* Tell the XPT about the event */ xpt_async(AC_BUS_RESET, ch->path, NULL); } static int siis_setup_fis(struct siis_cmd *ctp, union ccb *ccb, int tag) { u_int8_t *fis = &ctp->fis[0]; bzero(fis, 24); fis[0] = 0x27; /* host to device */ fis[1] = (ccb->ccb_h.target_id & 0x0f); if (ccb->ccb_h.func_code == XPT_SCSI_IO) { fis[1] |= 0x80; fis[2] = ATA_PACKET_CMD; if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) fis[3] = ATA_F_DMA; else { fis[5] = ccb->csio.dxfer_len; fis[6] = ccb->csio.dxfer_len >> 8; } fis[7] = ATA_D_LBA; fis[15] = ATA_A_4BIT; bzero(ctp->u.atapi.ccb, 16); bcopy((ccb->ccb_h.flags & CAM_CDB_POINTER) ? ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes, ctp->u.atapi.ccb, ccb->csio.cdb_len); } else if ((ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) == 0) { fis[1] |= 0x80; fis[2] = ccb->ataio.cmd.command; fis[3] = ccb->ataio.cmd.features; fis[4] = ccb->ataio.cmd.lba_low; fis[5] = ccb->ataio.cmd.lba_mid; fis[6] = ccb->ataio.cmd.lba_high; fis[7] = ccb->ataio.cmd.device; fis[8] = ccb->ataio.cmd.lba_low_exp; fis[9] = ccb->ataio.cmd.lba_mid_exp; fis[10] = ccb->ataio.cmd.lba_high_exp; fis[11] = ccb->ataio.cmd.features_exp; if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) { fis[12] = tag << 3; fis[13] = 0; } else { fis[12] = ccb->ataio.cmd.sector_count; fis[13] = ccb->ataio.cmd.sector_count_exp; } fis[15] = ATA_A_4BIT; } else { /* Soft reset. */ } return (20); } static int siis_sata_connect(struct siis_channel *ch) { u_int32_t status; int timeout; /* Wait up to 100ms for "connect well" */ for (timeout = 0; timeout < 100 ; timeout++) { status = ATA_INL(ch->r_mem, SIIS_P_SSTS); if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) && ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) && ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) break; DELAY(1000); } if (timeout >= 100) { if (bootverbose) { device_printf(ch->dev, "SATA connect timeout status=%08x\n", status); } return (0); } if (bootverbose) { device_printf(ch->dev, "SATA connect time=%dms status=%08x\n", timeout, status); } /* Clear SATA error register */ ATA_OUTL(ch->r_mem, SIIS_P_SERR, 0xffffffff); return (1); } static int siis_sata_phy_reset(device_t dev) { struct siis_channel *ch = device_get_softc(dev); uint32_t val; if (bootverbose) device_printf(dev, "hardware reset ...\n"); ATA_OUTL(ch->r_mem, SIIS_P_SCTL, ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER | ATA_SC_DET_RESET); DELAY(50000); if (ch->sata_rev == 1) val = ATA_SC_SPD_SPEED_GEN1; else if (ch->sata_rev == 2) val = ATA_SC_SPD_SPEED_GEN2; else if (ch->sata_rev == 3) val = ATA_SC_SPD_SPEED_GEN3; else val = 0; ATA_OUTL(ch->r_mem, SIIS_P_SCTL, ATA_SC_DET_IDLE | val | ((ch->pm_level > 0) ? 0 : (ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER))); DELAY(50000); return (siis_sata_connect(ch)); } static void siisaction(struct cam_sim *sim, union ccb *ccb) { device_t dev; struct siis_channel *ch; CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("siisaction func_code=%x\n", ccb->ccb_h.func_code)); ch = (struct siis_channel *)cam_sim_softc(sim); dev = ch->dev; mtx_assert(&ch->mtx, MA_OWNED); switch (ccb->ccb_h.func_code) { /* Common cases first */ case XPT_ATA_IO: /* Execute the requested I/O operation */ case XPT_SCSI_IO: if (ch->devices == 0) { ccb->ccb_h.status = CAM_SEL_TIMEOUT; xpt_done(ccb); break; } /* Check for command collision. */ if (siis_check_collision(dev, ccb)) { /* Freeze command. */ ch->frozen = ccb; /* We have only one frozen slot, so freeze simq also. */ xpt_freeze_simq(ch->sim, 1); return; } siis_begin_transaction(dev, ccb); break; case XPT_EN_LUN: /* Enable LUN as a target */ case XPT_TARGET_IO: /* Execute target I/O request */ case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */ case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/ case XPT_ABORT: /* Abort the specified CCB */ /* XXX Implement */ ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(ccb); break; case XPT_SET_TRAN_SETTINGS: { struct ccb_trans_settings *cts = &ccb->cts; if (cts->xport_specific.sata.valid & CTS_SATA_VALID_PM) { if (cts->xport_specific.sata.pm_present) ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PME); else ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME); } ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); break; } case XPT_GET_TRAN_SETTINGS: /* Get default/user set transfer settings for the target */ { struct ccb_trans_settings *cts = &ccb->cts; uint32_t status; cts->protocol = PROTO_ATA; cts->protocol_version = SCSI_REV_2; cts->transport = XPORT_SATA; cts->transport_version = 2; cts->proto_specific.valid = 0; cts->xport_specific.sata.valid = 0; if (cts->type == CTS_TYPE_CURRENT_SETTINGS) status = ATA_INL(ch->r_mem, SIIS_P_SSTS) & ATA_SS_SPD_MASK; else status = ATA_INL(ch->r_mem, SIIS_P_SCTL) & ATA_SC_SPD_MASK; if (status & ATA_SS_SPD_GEN3) { cts->xport_specific.sata.bitrate = 600000; cts->xport_specific.sata.valid |= CTS_SATA_VALID_SPEED; } else if (status & ATA_SS_SPD_GEN2) { cts->xport_specific.sata.bitrate = 300000; cts->xport_specific.sata.valid |= CTS_SATA_VALID_SPEED; } else if (status & ATA_SS_SPD_GEN1) { cts->xport_specific.sata.bitrate = 150000; cts->xport_specific.sata.valid |= CTS_SATA_VALID_SPEED; } cts->xport_specific.sata.pm_present = (ATA_INL(ch->r_mem, SIIS_P_STS) & SIIS_P_CTL_PME) ? 1 : 0; cts->xport_specific.sata.valid |= CTS_SATA_VALID_PM; ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); break; } #if 0 case XPT_CALC_GEOMETRY: { struct ccb_calc_geometry *ccg; uint32_t size_mb; uint32_t secs_per_cylinder; ccg = &ccb->ccg; size_mb = ccg->volume_size / ((1024L * 1024L) / ccg->block_size); if (size_mb >= 1024 && (aha->extended_trans != 0)) { if (size_mb >= 2048) { ccg->heads = 255; ccg->secs_per_track = 63; } else { ccg->heads = 128; ccg->secs_per_track = 32; } } else { ccg->heads = 64; ccg->secs_per_track = 32; } secs_per_cylinder = ccg->heads * ccg->secs_per_track; ccg->cylinders = ccg->volume_size / secs_per_cylinder; ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); break; } #endif case XPT_RESET_BUS: /* Reset the specified SCSI bus */ case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ siis_reset(dev); ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); break; case XPT_TERM_IO: /* Terminate the I/O process */ /* XXX Implement */ ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(ccb); break; case XPT_PATH_INQ: /* Path routing inquiry */ { struct ccb_pathinq *cpi = &ccb->cpi; cpi->version_num = 1; /* XXX??? */ cpi->hba_inquiry = PI_SDTR_ABLE | PI_TAG_ABLE; cpi->hba_inquiry |= PI_SATAPM; cpi->target_sprt = 0; cpi->hba_misc = PIM_SEQSCAN; cpi->hba_eng_cnt = 0; cpi->max_target = 14; cpi->max_lun = 0; cpi->initiator_id = 0; cpi->bus_id = cam_sim_bus(sim); cpi->base_transfer_speed = 150000; strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); strncpy(cpi->hba_vid, "SIIS", HBA_IDLEN); strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); cpi->unit_number = cam_sim_unit(sim); cpi->transport = XPORT_SATA; cpi->transport_version = 2; cpi->protocol = PROTO_ATA; cpi->protocol_version = SCSI_REV_2; cpi->ccb_h.status = CAM_REQ_CMP; cpi->maxio = MAXPHYS; xpt_done(ccb); break; } default: ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(ccb); break; } } static void siispoll(struct cam_sim *sim) { struct siis_channel *ch = (struct siis_channel *)cam_sim_softc(sim); siis_ch_intr(ch->dev); }