#include __FBSDID("$FreeBSD$"); /*- * Copyright (c) 2007-2008 Hans Petter Selasky. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define MEM_RID 0 /* Pin Definitions - do they belong here or somewhere else ? */ #define VBUS_MASK AT91C_PIO_PB24 #define VBUS_BASE AT91RM92_PIOB_BASE #define PULLUP_MASK AT91C_PIO_PB22 #define PULLUP_BASE AT91RM92_PIOB_BASE static device_probe_t at91_udp_probe; static device_attach_t at91_udp_attach; static device_detach_t at91_udp_detach; static device_shutdown_t at91_udp_shutdown; struct at91_udp_softc { struct at91dci_softc sc_dci; /* must be first */ struct at91_pmc_clock *sc_iclk; struct at91_pmc_clock *sc_fclk; struct resource *sc_vbus_irq_res; void *sc_vbus_intr_hdl; }; static void at91_vbus_poll(struct at91_udp_softc *sc) { uint32_t temp; uint8_t vbus_val; /* XXX temporary clear interrupts here */ temp = at91_pio_gpio_clear_interrupt(VBUS_BASE); /* just forward it */ vbus_val = at91_pio_gpio_get(VBUS_BASE, VBUS_MASK); at91dci_vbus_interrupt(&sc->sc_dci, vbus_val); } static void at91_udp_clocks_on(void *arg) { struct at91_udp_softc *sc = arg; at91_pmc_clock_enable(sc->sc_iclk); at91_pmc_clock_enable(sc->sc_fclk); } static void at91_udp_clocks_off(void *arg) { struct at91_udp_softc *sc = arg; at91_pmc_clock_disable(sc->sc_fclk); at91_pmc_clock_disable(sc->sc_iclk); } static void at91_udp_pull_up(void *arg) { at91_pio_gpio_set(PULLUP_BASE, PULLUP_MASK); } static void at91_udp_pull_down(void *arg) { at91_pio_gpio_clear(PULLUP_BASE, PULLUP_MASK); } static int at91_udp_probe(device_t dev) { device_set_desc(dev, "AT91 integrated AT91_UDP controller"); return (0); } static int at91_udp_attach(device_t dev) { struct at91_udp_softc *sc = device_get_softc(dev); int err; int rid; /* setup AT9100 USB device controller interface softc */ sc->sc_dci.sc_clocks_on = &at91_udp_clocks_on; sc->sc_dci.sc_clocks_off = &at91_udp_clocks_off; sc->sc_dci.sc_clocks_arg = sc; sc->sc_dci.sc_pull_up = &at91_udp_pull_up; sc->sc_dci.sc_pull_down = &at91_udp_pull_down; sc->sc_dci.sc_pull_arg = sc; /* initialise some bus fields */ sc->sc_dci.sc_bus.parent = dev; sc->sc_dci.sc_bus.devices = sc->sc_dci.sc_devices; sc->sc_dci.sc_bus.devices_max = AT91_MAX_DEVICES; /* get all DMA memory */ if (usb_bus_mem_alloc_all(&sc->sc_dci.sc_bus, USB_GET_DMA_TAG(dev), NULL)) { return (ENOMEM); } /* * configure VBUS input pin, enable deglitch and enable * interrupt : */ at91_pio_use_gpio(VBUS_BASE, VBUS_MASK); at91_pio_gpio_input(VBUS_BASE, VBUS_MASK); at91_pio_gpio_set_deglitch(VBUS_BASE, VBUS_MASK, 1); at91_pio_gpio_set_interrupt(VBUS_BASE, VBUS_MASK, 1); /* * configure PULLUP output pin : */ at91_pio_use_gpio(PULLUP_BASE, PULLUP_MASK); at91_pio_gpio_output(PULLUP_BASE, PULLUP_MASK, 0); at91_udp_pull_down(sc); /* wait 10ms for pulldown to stabilise */ usb_pause_mtx(NULL, hz / 100); sc->sc_iclk = at91_pmc_clock_ref("udc_clk"); sc->sc_fclk = at91_pmc_clock_ref("udpck"); rid = MEM_RID; sc->sc_dci.sc_io_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); if (!(sc->sc_dci.sc_io_res)) { err = ENOMEM; goto error; } sc->sc_dci.sc_io_tag = rman_get_bustag(sc->sc_dci.sc_io_res); sc->sc_dci.sc_io_hdl = rman_get_bushandle(sc->sc_dci.sc_io_res); sc->sc_dci.sc_io_size = rman_get_size(sc->sc_dci.sc_io_res); rid = 0; sc->sc_dci.sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE); if (!(sc->sc_dci.sc_irq_res)) { goto error; } rid = 1; sc->sc_vbus_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE); if (!(sc->sc_vbus_irq_res)) { goto error; } sc->sc_dci.sc_bus.bdev = device_add_child(dev, "usbus", -1); if (!(sc->sc_dci.sc_bus.bdev)) { goto error; } device_set_ivars(sc->sc_dci.sc_bus.bdev, &sc->sc_dci.sc_bus); #if (__FreeBSD_version >= 700031) err = bus_setup_intr(dev, sc->sc_dci.sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, NULL, (driver_intr_t *)at91dci_interrupt, sc, &sc->sc_dci.sc_intr_hdl); #else err = bus_setup_intr(dev, sc->sc_dci.sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, (driver_intr_t *)at91dci_interrupt, sc, &sc->sc_dci.sc_intr_hdl); #endif if (err) { sc->sc_dci.sc_intr_hdl = NULL; goto error; } #if (__FreeBSD_version >= 700031) err = bus_setup_intr(dev, sc->sc_vbus_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, NULL, (driver_intr_t *)at91_vbus_poll, sc, &sc->sc_vbus_intr_hdl); #else err = bus_setup_intr(dev, sc->sc_vbus_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, (driver_intr_t *)at91_vbus_poll, sc, &sc->sc_vbus_intr_hdl); #endif if (err) { sc->sc_vbus_intr_hdl = NULL; goto error; } err = at91dci_init(&sc->sc_dci); if (!err) { err = device_probe_and_attach(sc->sc_dci.sc_bus.bdev); } if (err) { goto error; } else { /* poll VBUS one time */ at91_vbus_poll(sc); } return (0); error: at91_udp_detach(dev); return (ENXIO); } static int at91_udp_detach(device_t dev) { struct at91_udp_softc *sc = device_get_softc(dev); device_t bdev; int err; if (sc->sc_dci.sc_bus.bdev) { bdev = sc->sc_dci.sc_bus.bdev; device_detach(bdev); device_delete_child(dev, bdev); } /* during module unload there are lots of children leftover */ device_delete_all_children(dev); /* disable Transceiver */ AT91_UDP_WRITE_4(&sc->sc_dci, AT91_UDP_TXVC, AT91_UDP_TXVC_DIS); /* disable and clear all interrupts */ AT91_UDP_WRITE_4(&sc->sc_dci, AT91_UDP_IDR, 0xFFFFFFFF); AT91_UDP_WRITE_4(&sc->sc_dci, AT91_UDP_ICR, 0xFFFFFFFF); /* disable VBUS interrupt */ at91_pio_gpio_set_interrupt(VBUS_BASE, VBUS_MASK, 0); if (sc->sc_vbus_irq_res && sc->sc_vbus_intr_hdl) { err = bus_teardown_intr(dev, sc->sc_vbus_irq_res, sc->sc_vbus_intr_hdl); sc->sc_vbus_intr_hdl = NULL; } if (sc->sc_vbus_irq_res) { bus_release_resource(dev, SYS_RES_IRQ, 1, sc->sc_vbus_irq_res); sc->sc_vbus_irq_res = NULL; } if (sc->sc_dci.sc_irq_res && sc->sc_dci.sc_intr_hdl) { /* * only call at91_udp_uninit() after at91_udp_init() */ at91dci_uninit(&sc->sc_dci); err = bus_teardown_intr(dev, sc->sc_dci.sc_irq_res, sc->sc_dci.sc_intr_hdl); sc->sc_dci.sc_intr_hdl = NULL; } if (sc->sc_dci.sc_irq_res) { bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_dci.sc_irq_res); sc->sc_dci.sc_irq_res = NULL; } if (sc->sc_dci.sc_io_res) { bus_release_resource(dev, SYS_RES_MEMORY, MEM_RID, sc->sc_dci.sc_io_res); sc->sc_dci.sc_io_res = NULL; } usb_bus_mem_free_all(&sc->sc_dci.sc_bus, NULL); /* disable clocks */ at91_pmc_clock_disable(sc->sc_iclk); at91_pmc_clock_disable(sc->sc_fclk); at91_pmc_clock_deref(sc->sc_fclk); at91_pmc_clock_deref(sc->sc_iclk); return (0); } static int at91_udp_shutdown(device_t dev) { struct at91_udp_softc *sc = device_get_softc(dev); int err; err = bus_generic_shutdown(dev); if (err) return (err); at91dci_uninit(&sc->sc_dci); return (0); } static device_method_t at91_udp_methods[] = { /* Device interface */ DEVMETHOD(device_probe, at91_udp_probe), DEVMETHOD(device_attach, at91_udp_attach), DEVMETHOD(device_detach, at91_udp_detach), DEVMETHOD(device_shutdown, at91_udp_shutdown), /* Bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), {0, 0} }; static driver_t at91_udp_driver = { "at91_udp", at91_udp_methods, sizeof(struct at91_udp_softc), }; static devclass_t at91_udp_devclass; DRIVER_MODULE(at91_udp, atmelarm, at91_udp_driver, at91_udp_devclass, 0, 0);