/* $FreeBSD$ */ /*- * Copyright (c) 2001 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Lennart Augustsson (lennart@augustsson.net). * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _EHCI_H_ #define _EHCI_H_ #define EHCI_MAX_DEVICES MIN(USB_MAX_DEVICES, 128) /* PCI config registers */ #define PCI_CBMEM 0x10 /* configuration base MEM */ #define PCI_INTERFACE_EHCI 0x20 #define PCI_USBREV 0x60 /* RO USB protocol revision */ #define PCI_USB_REV_MASK 0xff #define PCI_USB_REV_PRE_1_0 0x00 #define PCI_USB_REV_1_0 0x10 #define PCI_USB_REV_1_1 0x11 #define PCI_USB_REV_2_0 0x20 #define PCI_EHCI_FLADJ 0x61 /* RW Frame len adj, SOF=59488+6*fladj */ #define PCI_EHCI_PORTWAKECAP 0x62 /* RW Port wake caps (opt) */ /* EHCI Extended Capabilities */ #define EHCI_EC_LEGSUP 0x01 #define EHCI_EECP_NEXT(x) (((x) >> 8) & 0xff) #define EHCI_EECP_ID(x) ((x) & 0xff) /* Legacy support extended capability */ #define EHCI_LEGSUP_BIOS_SEM 0x02 #define EHCI_LEGSUP_OS_SEM 0x03 #define EHCI_LEGSUP_USBLEGCTLSTS 0x04 /* EHCI capability registers */ #define EHCI_CAPLENGTH 0x00 /* RO Capability register length field */ /* reserved 0x01 */ #define EHCI_HCIVERSION 0x02 /* RO Interface version number */ #define EHCI_HCSPARAMS 0x04 /* RO Structural parameters */ #define EHCI_HCS_DEBUGPORT(x) (((x) >> 20) & 0xf) #define EHCI_HCS_P_INDICATOR(x) ((x) & 0x10000) #define EHCI_HCS_N_CC(x) (((x) >> 12) & 0xf) /* # of companion ctlrs */ #define EHCI_HCS_N_PCC(x) (((x) >> 8) & 0xf) /* # of ports per comp. */ #define EHCI_HCS_PPC(x) ((x) & 0x10) /* port power control */ #define EHCI_HCS_N_PORTS(x) ((x) & 0xf) /* # of ports */ #define EHCI_HCCPARAMS 0x08 /* RO Capability parameters */ #define EHCI_HCC_EECP(x) (((x) >> 8) & 0xff) /* extended ports caps */ #define EHCI_HCC_IST(x) (((x) >> 4) & 0xf) /* isoc sched threshold */ #define EHCI_HCC_ASPC(x) ((x) & 0x4) /* async sched park cap */ #define EHCI_HCC_PFLF(x) ((x) & 0x2) /* prog frame list flag */ #define EHCI_HCC_64BIT(x) ((x) & 0x1) /* 64 bit address cap */ #define EHCI_HCSP_PORTROUTE 0x0c /* RO Companion port route description */ /* EHCI operational registers. Offset given by EHCI_CAPLENGTH register */ #define EHCI_USBCMD 0x00 /* RO, RW, WO Command register */ #define EHCI_CMD_ITC_M 0x00ff0000 /* RW interrupt threshold ctrl */ #define EHCI_CMD_ITC_1 0x00010000 #define EHCI_CMD_ITC_2 0x00020000 #define EHCI_CMD_ITC_4 0x00040000 #define EHCI_CMD_ITC_8 0x00080000 #define EHCI_CMD_ITC_16 0x00100000 #define EHCI_CMD_ITC_32 0x00200000 #define EHCI_CMD_ITC_64 0x00400000 #define EHCI_CMD_ASPME 0x00000800 /* RW/RO async park enable */ #define EHCI_CMD_ASPMC 0x00000300 /* RW/RO async park count */ #define EHCI_CMD_LHCR 0x00000080 /* RW light host ctrl reset */ #define EHCI_CMD_IAAD 0x00000040 /* RW intr on async adv door * bell */ #define EHCI_CMD_ASE 0x00000020 /* RW async sched enable */ #define EHCI_CMD_PSE 0x00000010 /* RW periodic sched enable */ #define EHCI_CMD_FLS_M 0x0000000c /* RW/RO frame list size */ #define EHCI_CMD_FLS(x) (((x) >> 2) & 3) /* RW/RO frame list size */ #define EHCI_CMD_HCRESET 0x00000002 /* RW reset */ #define EHCI_CMD_RS 0x00000001 /* RW run/stop */ #define EHCI_USBSTS 0x04 /* RO, RW, RWC Status register */ #define EHCI_STS_ASS 0x00008000 /* RO async sched status */ #define EHCI_STS_PSS 0x00004000 /* RO periodic sched status */ #define EHCI_STS_REC 0x00002000 /* RO reclamation */ #define EHCI_STS_HCH 0x00001000 /* RO host controller halted */ #define EHCI_STS_IAA 0x00000020 /* RWC interrupt on async adv */ #define EHCI_STS_HSE 0x00000010 /* RWC host system error */ #define EHCI_STS_FLR 0x00000008 /* RWC frame list rollover */ #define EHCI_STS_PCD 0x00000004 /* RWC port change detect */ #define EHCI_STS_ERRINT 0x00000002 /* RWC error interrupt */ #define EHCI_STS_INT 0x00000001 /* RWC interrupt */ #define EHCI_STS_INTRS(x) ((x) & 0x3f) /* * NOTE: the doorbell interrupt is enabled, but the doorbell is never * used! SiS chipsets require this. */ #define EHCI_NORMAL_INTRS (EHCI_STS_IAA | EHCI_STS_HSE | \ EHCI_STS_PCD | EHCI_STS_ERRINT | EHCI_STS_INT) #define EHCI_USBINTR 0x08 /* RW Interrupt register */ #define EHCI_INTR_IAAE 0x00000020 /* interrupt on async advance * ena */ #define EHCI_INTR_HSEE 0x00000010 /* host system error ena */ #define EHCI_INTR_FLRE 0x00000008 /* frame list rollover ena */ #define EHCI_INTR_PCIE 0x00000004 /* port change ena */ #define EHCI_INTR_UEIE 0x00000002 /* USB error intr ena */ #define EHCI_INTR_UIE 0x00000001 /* USB intr ena */ #define EHCI_FRINDEX 0x0c /* RW Frame Index register */ #define EHCI_CTRLDSSEGMENT 0x10 /* RW Control Data Structure Segment */ #define EHCI_PERIODICLISTBASE 0x14 /* RW Periodic List Base */ #define EHCI_ASYNCLISTADDR 0x18 /* RW Async List Base */ #define EHCI_CONFIGFLAG 0x40 /* RW Configure Flag register */ #define EHCI_CONF_CF 0x00000001 /* RW configure flag */ #define EHCI_PORTSC(n) (0x40+(4*(n))) /* RO, RW, RWC Port Status reg */ #define EHCI_PS_WKOC_E 0x00400000 /* RW wake on over current ena */ #define EHCI_PS_WKDSCNNT_E 0x00200000 /* RW wake on disconnect ena */ #define EHCI_PS_WKCNNT_E 0x00100000 /* RW wake on connect ena */ #define EHCI_PS_PTC 0x000f0000 /* RW port test control */ #define EHCI_PS_PIC 0x0000c000 /* RW port indicator control */ #define EHCI_PS_PO 0x00002000 /* RW port owner */ #define EHCI_PS_PP 0x00001000 /* RW,RO port power */ #define EHCI_PS_LS 0x00000c00 /* RO line status */ #define EHCI_PS_IS_LOWSPEED(x) (((x) & EHCI_PS_LS) == 0x00000400) #define EHCI_PS_PR 0x00000100 /* RW port reset */ #define EHCI_PS_SUSP 0x00000080 /* RW suspend */ #define EHCI_PS_FPR 0x00000040 /* RW force port resume */ #define EHCI_PS_OCC 0x00000020 /* RWC over current change */ #define EHCI_PS_OCA 0x00000010 /* RO over current active */ #define EHCI_PS_PEC 0x00000008 /* RWC port enable change */ #define EHCI_PS_PE 0x00000004 /* RW port enable */ #define EHCI_PS_CSC 0x00000002 /* RWC connect status change */ #define EHCI_PS_CS 0x00000001 /* RO connect status */ #define EHCI_PS_CLEAR (EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC) #define EHCI_USBMODE 0x68 /* RW USB Device mode register */ #define EHCI_UM_CM 0x00000003 /* R/WO Controller Mode */ #define EHCI_UM_CM_IDLE 0x0 /* Idle */ #define EHCI_UM_CM_HOST 0x3 /* Host Controller */ #define EHCI_UM_ES 0x00000004 /* R/WO Endian Select */ #define EHCI_UM_ES_LE 0x0 /* Little-endian byte alignment */ #define EHCI_UM_ES_BE 0x4 /* Big-endian byte alignment */ #define EHCI_UM_SDIS 0x00000010 /* R/WO Stream Disable Mode */ #define EHCI_PORT_RESET_COMPLETE 2 /* ms */ /* * Alignment NOTE: structures must be aligned so that the hardware can index * without performing addition. */ #define EHCI_FRAMELIST_ALIGN 0x1000 /* bytes */ #define EHCI_FRAMELIST_COUNT 1024 /* units */ #define EHCI_VIRTUAL_FRAMELIST_COUNT 128 /* units */ #if ((8*EHCI_VIRTUAL_FRAMELIST_COUNT) < USB_MAX_HS_ISOC_FRAMES_PER_XFER) #error "maximum number of high-speed isochronous frames is higher than supported!" #endif #if (EHCI_VIRTUAL_FRAMELIST_COUNT < USB_MAX_FS_ISOC_FRAMES_PER_XFER) #error "maximum number of full-speed isochronous frames is higher than supported!" #endif /* Link types */ #define EHCI_LINK_TERMINATE 0x00000001 #define EHCI_LINK_TYPE(x) ((x) & 0x00000006) #define EHCI_LINK_ITD 0x0 #define EHCI_LINK_QH 0x2 #define EHCI_LINK_SITD 0x4 #define EHCI_LINK_FSTN 0x6 #define EHCI_LINK_ADDR(x) ((x) &~ 0x1f) /* Structures alignment (bytes) */ #define EHCI_ITD_ALIGN 128 #define EHCI_SITD_ALIGN 64 #define EHCI_QTD_ALIGN 64 #define EHCI_QH_ALIGN 128 #define EHCI_FSTN_ALIGN 32 /* Data buffers are divided into one or more pages */ #define EHCI_PAGE_SIZE 0x1000 #if ((USB_PAGE_SIZE < EHCI_PAGE_SIZE) || (EHCI_PAGE_SIZE == 0) || \ (USB_PAGE_SIZE < EHCI_ITD_ALIGN) || (EHCI_ITD_ALIGN == 0) || \ (USB_PAGE_SIZE < EHCI_SITD_ALIGN) || (EHCI_SITD_ALIGN == 0) || \ (USB_PAGE_SIZE < EHCI_QTD_ALIGN) || (EHCI_QTD_ALIGN == 0) || \ (USB_PAGE_SIZE < EHCI_QH_ALIGN) || (EHCI_QH_ALIGN == 0) || \ (USB_PAGE_SIZE < EHCI_FSTN_ALIGN) || (EHCI_FSTN_ALIGN == 0)) #error "Invalid USB page size!" #endif /* * Isochronous Transfer Descriptor. This descriptor is used for high speed * transfers only. */ struct ehci_itd { volatile uint32_t itd_next; volatile uint32_t itd_status[8]; #define EHCI_ITD_SET_LEN(x) ((x) << 16) #define EHCI_ITD_GET_LEN(x) (((x) >> 16) & 0xFFF) #define EHCI_ITD_IOC (1 << 15) #define EHCI_ITD_SET_PG(x) ((x) << 12) #define EHCI_ITD_GET_PG(x) (((x) >> 12) & 0x7) #define EHCI_ITD_SET_OFFS(x) (x) #define EHCI_ITD_GET_OFFS(x) (((x) >> 0) & 0xFFF) #define EHCI_ITD_ACTIVE (1 << 31) #define EHCI_ITD_DATABUFERR (1 << 30) #define EHCI_ITD_BABBLE (1 << 29) #define EHCI_ITD_XACTERR (1 << 28) volatile uint32_t itd_bp[7]; /* itd_bp[0] */ #define EHCI_ITD_SET_ADDR(x) (x) #define EHCI_ITD_GET_ADDR(x) (((x) >> 0) & 0x7F) #define EHCI_ITD_SET_ENDPT(x) ((x) << 8) #define EHCI_ITD_GET_ENDPT(x) (((x) >> 8) & 0xF) /* itd_bp[1] */ #define EHCI_ITD_SET_DIR_IN (1 << 11) #define EHCI_ITD_SET_DIR_OUT (0 << 11) #define EHCI_ITD_SET_MPL(x) (x) #define EHCI_ITD_GET_MPL(x) (((x) >> 0) & 0x7FF) volatile uint32_t itd_bp_hi[7]; /* * Extra information needed: */ uint32_t itd_self; struct ehci_itd *next; struct ehci_itd *prev; struct ehci_itd *obj_next; struct usb_page_cache *page_cache; } __aligned(EHCI_ITD_ALIGN); typedef struct ehci_itd ehci_itd_t; /* * Split Transaction Isochronous Transfer Descriptor. This descriptor is used * for full speed transfers only. */ struct ehci_sitd { volatile uint32_t sitd_next; volatile uint32_t sitd_portaddr; #define EHCI_SITD_SET_DIR_OUT (0 << 31) #define EHCI_SITD_SET_DIR_IN (1 << 31) #define EHCI_SITD_SET_ADDR(x) (x) #define EHCI_SITD_GET_ADDR(x) ((x) & 0x7F) #define EHCI_SITD_SET_ENDPT(x) ((x) << 8) #define EHCI_SITD_GET_ENDPT(x) (((x) >> 8) & 0xF) #define EHCI_SITD_GET_DIR(x) ((x) >> 31) #define EHCI_SITD_SET_PORT(x) ((x) << 24) #define EHCI_SITD_GET_PORT(x) (((x) >> 24) & 0x7F) #define EHCI_SITD_SET_HUBA(x) ((x) << 16) #define EHCI_SITD_GET_HUBA(x) (((x) >> 16) & 0x7F) volatile uint32_t sitd_mask; #define EHCI_SITD_SET_SMASK(x) (x) #define EHCI_SITD_SET_CMASK(x) ((x) << 8) volatile uint32_t sitd_status; #define EHCI_SITD_COMPLETE_SPLIT (1<<1) #define EHCI_SITD_START_SPLIT (0<<1) #define EHCI_SITD_MISSED_MICRO_FRAME (1<<2) #define EHCI_SITD_XACTERR (1<<3) #define EHCI_SITD_BABBLE (1<<4) #define EHCI_SITD_DATABUFERR (1<<5) #define EHCI_SITD_ERROR (1<<6) #define EHCI_SITD_ACTIVE (1<<7) #define EHCI_SITD_IOC (1<<31) #define EHCI_SITD_SET_LEN(len) ((len)<<16) #define EHCI_SITD_GET_LEN(x) (((x)>>16) & 0x3FF) volatile uint32_t sitd_bp[2]; volatile uint32_t sitd_back; volatile uint32_t sitd_bp_hi[2]; /* * Extra information needed: */ uint32_t sitd_self; struct ehci_sitd *next; struct ehci_sitd *prev; struct ehci_sitd *obj_next; struct usb_page_cache *page_cache; } __aligned(EHCI_SITD_ALIGN); typedef struct ehci_sitd ehci_sitd_t; /* Queue Element Transfer Descriptor */ struct ehci_qtd { volatile uint32_t qtd_next; volatile uint32_t qtd_altnext; volatile uint32_t qtd_status; #define EHCI_QTD_GET_STATUS(x) (((x) >> 0) & 0xff) #define EHCI_QTD_SET_STATUS(x) ((x) << 0) #define EHCI_QTD_ACTIVE 0x80 #define EHCI_QTD_HALTED 0x40 #define EHCI_QTD_BUFERR 0x20 #define EHCI_QTD_BABBLE 0x10 #define EHCI_QTD_XACTERR 0x08 #define EHCI_QTD_MISSEDMICRO 0x04 #define EHCI_QTD_SPLITXSTATE 0x02 #define EHCI_QTD_PINGSTATE 0x01 #define EHCI_QTD_STATERRS 0x74 #define EHCI_QTD_GET_PID(x) (((x) >> 8) & 0x3) #define EHCI_QTD_SET_PID(x) ((x) << 8) #define EHCI_QTD_PID_OUT 0x0 #define EHCI_QTD_PID_IN 0x1 #define EHCI_QTD_PID_SETUP 0x2 #define EHCI_QTD_GET_CERR(x) (((x) >> 10) & 0x3) #define EHCI_QTD_SET_CERR(x) ((x) << 10) #define EHCI_QTD_GET_C_PAGE(x) (((x) >> 12) & 0x7) #define EHCI_QTD_SET_C_PAGE(x) ((x) << 12) #define EHCI_QTD_GET_IOC(x) (((x) >> 15) & 0x1) #define EHCI_QTD_IOC 0x00008000 #define EHCI_QTD_GET_BYTES(x) (((x) >> 16) & 0x7fff) #define EHCI_QTD_SET_BYTES(x) ((x) << 16) #define EHCI_QTD_GET_TOGGLE(x) (((x) >> 31) & 0x1) #define EHCI_QTD_SET_TOGGLE(x) ((x) << 31) #define EHCI_QTD_TOGGLE_MASK 0x80000000 #define EHCI_QTD_NBUFFERS 5 #define EHCI_QTD_PAYLOAD_MAX ((EHCI_QTD_NBUFFERS-1)*EHCI_PAGE_SIZE) volatile uint32_t qtd_buffer[EHCI_QTD_NBUFFERS]; volatile uint32_t qtd_buffer_hi[EHCI_QTD_NBUFFERS]; /* * Extra information needed: */ struct ehci_qtd *alt_next; struct ehci_qtd *obj_next; struct usb_page_cache *page_cache; uint32_t qtd_self; uint16_t len; } __aligned(EHCI_QTD_ALIGN); typedef struct ehci_qtd ehci_qtd_t; /* Queue Head Sub Structure */ struct ehci_qh_sub { volatile uint32_t qtd_next; volatile uint32_t qtd_altnext; volatile uint32_t qtd_status; volatile uint32_t qtd_buffer[EHCI_QTD_NBUFFERS]; volatile uint32_t qtd_buffer_hi[EHCI_QTD_NBUFFERS]; } __aligned(4); /* Queue Head */ struct ehci_qh { volatile uint32_t qh_link; volatile uint32_t qh_endp; #define EHCI_QH_GET_ADDR(x) (((x) >> 0) & 0x7f) /* endpoint addr */ #define EHCI_QH_SET_ADDR(x) (x) #define EHCI_QH_ADDRMASK 0x0000007f #define EHCI_QH_GET_INACT(x) (((x) >> 7) & 0x01) /* inactivate on next */ #define EHCI_QH_INACT 0x00000080 #define EHCI_QH_GET_ENDPT(x) (((x) >> 8) & 0x0f) /* endpoint no */ #define EHCI_QH_SET_ENDPT(x) ((x) << 8) #define EHCI_QH_GET_EPS(x) (((x) >> 12) & 0x03) /* endpoint speed */ #define EHCI_QH_SET_EPS(x) ((x) << 12) #define EHCI_QH_SPEED_FULL 0x0 #define EHCI_QH_SPEED_LOW 0x1 #define EHCI_QH_SPEED_HIGH 0x2 #define EHCI_QH_GET_DTC(x) (((x) >> 14) & 0x01) /* data toggle control */ #define EHCI_QH_DTC 0x00004000 #define EHCI_QH_GET_HRECL(x) (((x) >> 15) & 0x01) /* head of reclamation */ #define EHCI_QH_HRECL 0x00008000 #define EHCI_QH_GET_MPL(x) (((x) >> 16) & 0x7ff) /* max packet len */ #define EHCI_QH_SET_MPL(x) ((x) << 16) #define EHCI_QH_MPLMASK 0x07ff0000 #define EHCI_QH_GET_CTL(x) (((x) >> 27) & 0x01) /* control endpoint */ #define EHCI_QH_CTL 0x08000000 #define EHCI_QH_GET_NRL(x) (((x) >> 28) & 0x0f) /* NAK reload */ #define EHCI_QH_SET_NRL(x) ((x) << 28) volatile uint32_t qh_endphub; #define EHCI_QH_GET_SMASK(x) (((x) >> 0) & 0xff) /* intr sched mask */ #define EHCI_QH_SET_SMASK(x) ((x) << 0) #define EHCI_QH_GET_CMASK(x) (((x) >> 8) & 0xff) /* split completion mask */ #define EHCI_QH_SET_CMASK(x) ((x) << 8) #define EHCI_QH_GET_HUBA(x) (((x) >> 16) & 0x7f) /* hub address */ #define EHCI_QH_SET_HUBA(x) ((x) << 16) #define EHCI_QH_GET_PORT(x) (((x) >> 23) & 0x7f) /* hub port */ #define EHCI_QH_SET_PORT(x) ((x) << 23) #define EHCI_QH_GET_MULT(x) (((x) >> 30) & 0x03) /* pipe multiplier */ #define EHCI_QH_SET_MULT(x) ((x) << 30) volatile uint32_t qh_curqtd; struct ehci_qh_sub qh_qtd; /* * Extra information needed: */ struct ehci_qh *next; struct ehci_qh *prev; struct ehci_qh *obj_next; struct usb_page_cache *page_cache; uint32_t qh_self; } __aligned(EHCI_QH_ALIGN); typedef struct ehci_qh ehci_qh_t; /* Periodic Frame Span Traversal Node */ struct ehci_fstn { volatile uint32_t fstn_link; volatile uint32_t fstn_back; } __aligned(EHCI_FSTN_ALIGN); typedef struct ehci_fstn ehci_fstn_t; struct ehci_hw_softc { struct usb_page_cache pframes_pc; struct usb_page_cache async_start_pc; struct usb_page_cache intr_start_pc[EHCI_VIRTUAL_FRAMELIST_COUNT]; struct usb_page_cache isoc_hs_start_pc[EHCI_VIRTUAL_FRAMELIST_COUNT]; struct usb_page_cache isoc_fs_start_pc[EHCI_VIRTUAL_FRAMELIST_COUNT]; struct usb_page pframes_pg; struct usb_page async_start_pg; struct usb_page intr_start_pg[EHCI_VIRTUAL_FRAMELIST_COUNT]; struct usb_page isoc_hs_start_pg[EHCI_VIRTUAL_FRAMELIST_COUNT]; struct usb_page isoc_fs_start_pg[EHCI_VIRTUAL_FRAMELIST_COUNT]; }; struct ehci_config_desc { struct usb_config_descriptor confd; struct usb_interface_descriptor ifcd; struct usb_endpoint_descriptor endpd; } __packed; union ehci_hub_desc { struct usb_status stat; struct usb_port_status ps; struct usb_hub_descriptor hubd; uint8_t temp[128]; }; typedef struct ehci_softc { struct ehci_hw_softc sc_hw; struct usb_bus sc_bus; /* base device */ struct usb_callout sc_tmo_pcd; union ehci_hub_desc sc_hub_desc; struct usb_device *sc_devices[EHCI_MAX_DEVICES]; struct resource *sc_io_res; struct resource *sc_irq_res; struct ehci_qh *sc_async_p_last; struct ehci_qh *sc_intr_p_last[EHCI_VIRTUAL_FRAMELIST_COUNT]; struct ehci_sitd *sc_isoc_fs_p_last[EHCI_VIRTUAL_FRAMELIST_COUNT]; struct ehci_itd *sc_isoc_hs_p_last[EHCI_VIRTUAL_FRAMELIST_COUNT]; void *sc_intr_hdl; bus_size_t sc_io_size; bus_space_tag_t sc_io_tag; bus_space_handle_t sc_io_hdl; uint32_t sc_eintrs; uint32_t sc_cmd; /* shadow of cmd register during * suspend */ uint16_t sc_intr_stat[EHCI_VIRTUAL_FRAMELIST_COUNT]; uint16_t sc_id_vendor; /* vendor ID for root hub */ uint16_t sc_flags; /* chip specific flags */ #define EHCI_SCFLG_SETMODE 0x0001 /* set bridge mode again after init */ #define EHCI_SCFLG_FORCESPEED 0x0002 /* force speed */ #define EHCI_SCFLG_NORESTERM 0x0004 /* don't terminate reset sequence */ #define EHCI_SCFLG_BIGEDESC 0x0008 /* big-endian byte order descriptors */ #define EHCI_SCFLG_BIGEMMIO 0x0010 /* big-endian byte order MMIO */ #define EHCI_SCFLG_TT 0x0020 /* transaction translator present */ uint8_t sc_offs; /* offset to operational registers */ uint8_t sc_doorbell_disable; /* set on doorbell failure */ uint8_t sc_noport; uint8_t sc_addr; /* device address */ uint8_t sc_conf; /* device configuration */ uint8_t sc_isreset; uint8_t sc_hub_idata[8]; char sc_vendor[16]; /* vendor string for root hub */ } ehci_softc_t; #define EREAD1(sc, a) bus_space_read_1((sc)->sc_io_tag, (sc)->sc_io_hdl, (a)) #define EREAD2(sc, a) bus_space_read_2((sc)->sc_io_tag, (sc)->sc_io_hdl, (a)) #define EREAD4(sc, a) bus_space_read_4((sc)->sc_io_tag, (sc)->sc_io_hdl, (a)) #define EWRITE1(sc, a, x) \ bus_space_write_1((sc)->sc_io_tag, (sc)->sc_io_hdl, (a), (x)) #define EWRITE2(sc, a, x) \ bus_space_write_2((sc)->sc_io_tag, (sc)->sc_io_hdl, (a), (x)) #define EWRITE4(sc, a, x) \ bus_space_write_4((sc)->sc_io_tag, (sc)->sc_io_hdl, (a), (x)) #define EOREAD1(sc, a) \ bus_space_read_1((sc)->sc_io_tag, (sc)->sc_io_hdl, (sc)->sc_offs+(a)) #define EOREAD2(sc, a) \ bus_space_read_2((sc)->sc_io_tag, (sc)->sc_io_hdl, (sc)->sc_offs+(a)) #define EOREAD4(sc, a) \ bus_space_read_4((sc)->sc_io_tag, (sc)->sc_io_hdl, (sc)->sc_offs+(a)) #define EOWRITE1(sc, a, x) \ bus_space_write_1((sc)->sc_io_tag, (sc)->sc_io_hdl, (sc)->sc_offs+(a), (x)) #define EOWRITE2(sc, a, x) \ bus_space_write_2((sc)->sc_io_tag, (sc)->sc_io_hdl, (sc)->sc_offs+(a), (x)) #define EOWRITE4(sc, a, x) \ bus_space_write_4((sc)->sc_io_tag, (sc)->sc_io_hdl, (sc)->sc_offs+(a), (x)) #ifdef USB_EHCI_BIG_ENDIAN_DESC /* * Handle byte order conversion between host and ``host controller''. * Typically the latter is little-endian but some controllers require * big-endian in which case we may need to manually swap. */ static __inline uint32_t htohc32(const struct ehci_softc *sc, const uint32_t v) { return sc->sc_flags & EHCI_SCFLG_BIGEDESC ? htobe32(v) : htole32(v); } static __inline uint16_t htohc16(const struct ehci_softc *sc, const uint16_t v) { return sc->sc_flags & EHCI_SCFLG_BIGEDESC ? htobe16(v) : htole16(v); } static __inline uint32_t hc32toh(const struct ehci_softc *sc, const uint32_t v) { return sc->sc_flags & EHCI_SCFLG_BIGEDESC ? be32toh(v) : le32toh(v); } static __inline uint16_t hc16toh(const struct ehci_softc *sc, const uint16_t v) { return sc->sc_flags & EHCI_SCFLG_BIGEDESC ? be16toh(v) : le16toh(v); } #else /* * Normal little-endian only conversion routines. */ static __inline uint32_t htohc32(const struct ehci_softc *sc, const uint32_t v) { return htole32(v); } static __inline uint16_t htohc16(const struct ehci_softc *sc, const uint16_t v) { return htole16(v); } static __inline uint32_t hc32toh(const struct ehci_softc *sc, const uint32_t v) { return le32toh(v); } static __inline uint16_t hc16toh(const struct ehci_softc *sc, const uint16_t v) { return le16toh(v); } #endif usb_bus_mem_cb_t ehci_iterate_hw_softc; usb_error_t ehci_reset(ehci_softc_t *sc); usb_error_t ehci_init(ehci_softc_t *sc); void ehci_detach(struct ehci_softc *sc); void ehci_suspend(struct ehci_softc *sc); void ehci_resume(struct ehci_softc *sc); void ehci_shutdown(ehci_softc_t *sc); void ehci_interrupt(ehci_softc_t *sc); #endif /* _EHCI_H_ */