/* $NetBSD$ */ /* $FreeBSD$ */ /* * Copyright (c) 2001 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Tetsuya Isaki. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * ScanLogic SL811HS/T USB Host Controller */ #define SL11_IDX_ADDR (0x00) #define SL11_IDX_DATA (0x01) #define SL11_PORTSIZE (0x02) #define SL11_E0BASE (0x00) /* Base of Control0 */ #define SL11_E0CTRL (0x00) /* Host Control Register */ #define SL11_E0ADDR (0x01) /* Host Base Address */ #define SL11_E0LEN (0x02) /* Host Base Length */ #define SL11_E0STAT (0x03) /* USB Status (Read) */ #define SL11_E0PID SL11_E0STAT /* Host PID, Device Endpoint (Write) */ #define SL11_E0CONT (0x04) /* Transfer Count (Read) */ #define SL11_E0DEV SL11_E0CONT /* Host Device Address (Write) */ #define SL11_E1BASE (0x08) /* Base of Control1 */ #define SL11_E1CTRL (SL11_E1BASE + SL11_E0CTRL) #define SL11_E1ADDR (SL11_E1BASE + SL11_E0ADDR) #define SL11_E1LEN (SL11_E1BASE + SL11_E0LEN) #define SL11_E1STAT (SL11_E1BASE + SL11_E0STAT) #define SL11_E1PID (SL11_E1BASE + SL11_E0PID) #define SL11_E1CONT (SL11_E1BASE + SL11_E0CONT) #define SL11_E1DEV (SL11_E1BASE + SL11_E0DEV) #define SL11_CTRL (0x05) /* Control Register1 */ #define SL11_IER (0x06) /* Interrupt Enable Register */ #define SL11_ISR (0x0d) /* Interrupt Status Register */ #define SL11_DATA (0x0e) /* SOF Counter Low (Write) */ #define SL11_REV SL11_DATA /* HW Revision Register (Read) */ #define SL811_CSOF (0x0f) /* SOF Counter High(R), Control2(W) */ #define SL11_MEM (0x10) /* Memory Buffer (0x10 - 0xff) */ #define SL11_EPCTRL_ARM (0x01) #define SL11_EPCTRL_ENABLE (0x02) #define SL11_EPCTRL_DIRECTION (0x04) #define SL11_EPCTRL_ISO (0x10) #define SL11_EPCTRL_SOF (0x20) #define SL11_EPCTRL_DATATOGGLE (0x40) #define SL11_EPCTRL_PREAMBLE (0x80) #define SL11_EPPID_PIDMASK (0xf0) #define SL11_EPPID_EPMASK (0x0f) #define SL11_EPSTAT_ACK (0x01) #define SL11_EPSTAT_ERROR (0x02) #define SL11_EPSTAT_TIMEOUT (0x04) #define SL11_EPSTAT_SEQUENCE (0x08) #define SL11_EPSTAT_SETUP (0x10) #define SL11_EPSTAT_OVERFLOW (0x20) #define SL11_EPSTAT_NAK (0x40) #define SL11_EPSTAT_STALL (0x80) #define SL11_CTRL_ENABLESOF (0x01) #define SL11_CTRL_EOF2 (0x04) #define SL11_CTRL_RESETENGINE (0x08) #define SL11_CTRL_JKSTATE (0x10) #define SL11_CTRL_LOWSPEED (0x20) #define SL11_CTRL_SUSPEND (0x40) #define SL11_IER_USBA (0x01) /* USB-A done */ #define SL11_IER_USBB (0x02) /* USB-B done */ #define SL11_IER_BABBLE (0x04) /* Babble detection */ #define SL11_IER_SOFTIMER (0x10) /* 1ms SOF timer */ #define SL11_IER_INSERT (0x20) /* Slave Insert/Remove detection */ #define SL11_IER_RESET (0x40) /* USB Reset/Resume */ #define SL11_ISR_USBA (0x01) /* USB-A done */ #define SL11_ISR_USBB (0x02) /* USB-B done */ #define SL11_ISR_BABBLE (0x04) /* Babble detection */ #define SL11_ISR_SOFTIMER (0x10) /* 1ms SOF timer */ #define SL11_ISR_INSERT (0x20) /* Slave Insert/Remove detection */ #define SL11_ISR_RESET (0x40) /* USB Reset/Resume */ #define SL11_ISR_DATA (0x80) /* Value of the Data+ pin */ #define SL11_REV_USBA (0x01) /* USB-A */ #define SL11_REV_USBB (0x02) /* USB-B */ #define SL11_REV_REVMASK (0xf0) /* HW Revision */ #define SL11_REV_REVSL11H (0x00) /* HW is SL11H */ #define SL11_REV_REVSL811HS (0x10) /* HW is SL811HS */ #define SL811_CSOF_SOFMASK (0x3f) /* SOF High Counter */ #define SL811_CSOF_POLARITY (0x40) /* Change polarity */ #define SL811_CSOF_MASTER (0x80) /* Master/Slave selection */