# # LINT -- config file for checking all the sources, tries to pull in # as much of the source tree as it can. # # This kernel is NOT MEANT to be runnable! # # $Id: LINT,v 1.73 1994/08/27 16:23:03 davidg Exp $ # machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" ident LINT timezone 8 dst maxusers 10 maxfdescs 2048 #Max file descriptors per process options MATH_EMULATE #Support for x87 emulation # Do not use in binary distributions #options GPL_MATH_EMULATE #Support for x87 emualtion via #new math emulator config kernel root on wd0 swap on wd0 and sd0 dumps on wd0 # # options that appear as inline #ifdef's # options "COM_MULTIPORT" #Multiport support in sys/isa/sio.c options "FIFO_TRIGGER=FIFO_TRIGGER_1" #Use this fifo value in sio.c options "COMPAT_43" #compatible with BSD 4.3 options "SYMTAB_SPACE=113498" #This kernel needs LOTS of symtable options GATEWAY #internetwork gateway options KTRACE #kernel tracing options "NCONS=8" #number of syscons virtual consoles options "FAT_CURSOR" #block cursor in syscons or pccons options "STAR_SAVER" #syscons "stars" screen saver options "FADE_SAVER" #syscons "fade" screen saver options "SNAKE_SAVER" #syscons "snake" screen saver options "BLANK_SAVER" #syscons "blank" screen saver #options ALLOW_CONFLICT_IOADDR #no IO addr conflict checks (PS/2 mice) #options ALLOW_CONFLICT_IRQ #no IRQ conflict checks (mport serial) options "TCP_COMPAT_42" #tcp/ip compatible with 4.2 # ^^^ NOT RECOMMENDED FOR NORMAL USE options UCONSOLE #x console support options DECBIT #here because clnp.h wanted it here #support for CLNP ``congestion #experienced'' bit in ISO-TP options TROLL #CLNP network error simulator options ICMPPRINTFS #ICMP packet dump by printf() options NSERRPRINTFS #ditto for XNS Error protocol #^^above three NOT RECOMMENTED options MACHVMCOMPAT #support for Mach-style vm calls options IPBROADCASTECHO=1 #send reply to broadcast pings options IPMASKAGENT=1 #send reply to icmp mask requests options TPCONS #support X.25 network-layer service options USER_LDT #allow user-level control of i386 ldt # See /sys/i386/doc/sound.doc for information about EXCLUDE options for # the sound drivers. # Multicast support. options MULTICAST # Multicast code options MROUTING # Multicast routing # # options that are in sys/conf/files # options "CD9660" #ISO 9660 filesystem options FDESC #File descriptor filesystem options FFS #Fast filesystem options KERNFS #Kernel filesystem options LFS #Log filesystem options MFS #Memory File System options NFS #Network File System options NULLFS #NULL filesystem options PORTAL #Portal filesystem options PROCFS #Process filesystem options UMAPFS #UID map filesystem options UNION #Union filesystem pseudo-device bpfilter 4 #berkeley packet filter options CCITT device cd0 #Only need one of these, the code dynamically grows device ch0 options DDB #Kernel debugger options EON pseudo-device ether options FIFO #pseudo-device imp options INET #Internet communications protocols options ISO options LKM #Loadable kernel modules pseudo-device loop #Network loop back device options NS #Xerox NS communications protocols options NSIP #XNS over IP pseudo-device ppp 2 #Point-to-point protocol pseudo-device pty 4 #Pseudo ttys options QUOTA #enable disk quotas options RMP #HP remote maint protocol controller scbus0 device sd0 device sd1 device sd2 device sd3 pseudo-device sl 2 device st0 device st1 options SYSVSHM options "SHMMAXPGS=64" # 256Kb of sharable memory options SYSVSEM options SYSVMSG #pseudo-device tb #tablet line discipline. options TPIP # ISO TP class 4 over IP #pseudo-device tun device uk0 #unknown scsi devices # # options that are in sys/i386/conf/files.i386 # #This is needed here so the isa? below will work controller isa0 # driver for the Adaptec 154x SCSI cards. controller aha0 at isa? port "IO_AHA0" bio irq 11 drq 5 vector ahaintr # driver for the Adaptec 174x SCSI cards. controller ahb0 at isa? bio irq 11 vector ahbintr # driver for the Bustek 742. controller bt0 at isa? port "IO_BT0" bio irq 12 vector btintr # driver for the Seagate ST01/ST02 card, not yet finished. #controller sg0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector sgintr controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 tape ft0 at fdc0 drive 2 # driver for the Western Digital and SMCC WD80xx cards, for the Novell # NE1000/2000 card and the 3COM 3C503 card. device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr # driver for the AT&T Starlan card. device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr #driver for the Isolan AT 4114-0 and the Isolink 4110 ethernet card. device is0 at isa? port 0x280 net irq 10 drq 7 vector isintr #device ix0 at isa? port 0x320 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr # driver for the Etherlink III ( 3C509 ) card, beta version. device ep0 at isa? port 0x300 net irq 10 vector epintr #driver for the 3c501 device el0 at isa? port 0x300 net irq 9 vector elintr #special cased above: #controller isa0 # interruptless parallel printer port driver device lpa0 at isa? port "IO_LPT1" tty device lpa1 at isa? port "IO_LPT2" tty # interrupt driven parallel printer port driver device lpt0 at isa? port "IO_LPT3" tty irq 7 vector lptintr # Driver for Mitsumi CD-ROM players device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr # Driver for Logitech and ATI inport bus mice device mse0 at isa? port 0x23c tty irq 5 vector mseintr device npx0 at isa? port "IO_NPX" irq 13 vector npxintr # Driver for ProAudioSpectrum SCSI, on cards with NCR 5380 chips. # The four units correspond to the HW-jumpers. No intr, No DMA, very slow. device pas0 at isa? port 0x1f88 device pas1 at isa? port 0x1f84 device pas2 at isa? port 0x1f8c device pas3 at isa? port 0x1e88 device pc0 at isa? port "IO_KBD" tty irq 1 vector pcrint #only one of pc0 or sc0 allowed #device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr #PS/2 mouse driver (must follow pc0 or sc0 if enabled). Also enable #ALLOW_CONFLICT_IOADDR option (see above) if you want to use this. #device psm0 at isa? port "IO_KBD" tty irq 12 vector psmintr pseudo-device speaker #tw device-driver controller uha0 at isa? port "IO_UHA0" bio irq 14 drq 5 vector uhaintr controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr # Various sound card drivers. # See /sys/doc/sound.doc for more information. device snd5 at isa? port 0x330 irq 6 vector mpuintr device snd4 at isa? port 0x220 irq 15 drq 6 vector gusintr device snd3 at isa? port 0x388 irq 10 drq 6 vector pasintr device snd2 at isa? port 0x220 irq 7 drq 1 vector sbintr device snd6 at isa? port 0x220 irq 7 drq 5 vector sbintr device snd7 at isa? port 0x300 device snd1 at isa? port 0x388 # The digital speaker driver (/dev/pcaudio). device pca0 at isa? tty # options that have not been resolved yet pseudo-device log