#
# Specific board setup for the Buffalo Airstation WZR-HPAG300H
#
# The WZR-HPAG300H has the following hardware:
#
# + AR7161 CPU SoC
# + 2x AR9280 5GHz 11n
# + AR8136 Gigabit switch
# + 2 m25ll128(really w25q128)  based 16MB flash
# + 128MB RAM
# + uboot environment

# $FreeBSD$

#NO_UNIVERSE

include		"AR71XX_BASE"
ident		"WZR-HPAG300H"
hints		"WZR-HPAG300H.hints"

options 	AR71XX_REALMEM=128*1024*1024

options 	AR71XX_ENV_UBOOT

options 	BOOTVERBOSE

# GEOM modules
device		geom_uzip	# compressed in-memory filesystem hackery!
device		geom_map	# to get access to the SPI flash partitions

options 	ROOTDEVNAME=\"ufs:/dev/map/rootfs.uzip\"

options 	AR71XX_ATH_EEPROM	# Fetch EEPROM/PCI config from flash
options 	ATH_EEPROM_FIRMWARE	# Use EEPROM from flash
device		firmware		# Used by the above

# Options required for miiproxy and mdiobus
options         ARGE_MDIO               # Export an MDIO bus separate from arge
device          miiproxy                # MDIO bus <-> MII PHY rendezvous

device          etherswitch
device          arswitch

# hwpmc
device		hwpmc_mips24k
device		hwpmc

# load these via modules, shrink kernel
nodevice	if_bridge
nodevice	bridgestp
nodevice	random