/*- * Copyright (c) 2016 Ruslan Bukin * All rights reserved. * * This software was developed by SRI International and the University of * Cambridge Computer Laboratory under DARPA/AFRL contract FA8750-10-C-0237 * ("CTSRD"), as part of the DARPA CRASH research programme. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #define AICFR 0x00 /* AIC Configuration Register */ #define AICFR_TFTH_S 16 /* Transmit FIFO threshold for interrupt or DMA request. */ #define AICFR_TFTH_M (0x1f << AICFR_TFTH_S) #define AICFR_TFTH(x) ((x) << AICFR_TFTH_S) #define AICFR_RFTH_S 24 /* Receive FIFO threshold for interrupt or DMA request. */ #define AICFR_RFTH_M (0x0f << AICFR_RFTH_S) #define AICFR_RFTH(x) ((x) << AICFR_RFTH_S) #define AICFR_ICDC (1 << 5) /* Internal CODEC used. */ #define AICFR_AUSEL (1 << 4) /* Audio Unit Select */ #define AICFR_RST (1 << 3) /* Reset AIC. */ #define AICFR_BCKD (1 << 2) /* BIT_CLK Direction. */ #define AICFR_SYNCD (1 << 1) /* SYNC is generated internally and driven out to the CODEC. */ #define AICFR_ENB (1 << 0) /* Enable AIC Controller. */ #define AICCR 0x04 /* AIC Common Control Register */ #define AICCR_TFLUSH (1 << 8) /* Transmit FIFO Flush. */ #define AICCR_RFLUSH (1 << 7) /* Receive FIFO Flush. */ #define AICCR_CHANNEL_S 24 #define AICCR_CHANNEL_M (0x7 << AICCR_CHANNEL_S) #define AICCR_CHANNEL_2 (0x1 << AICCR_CHANNEL_S) /* 2 channels, stereo */ #define AICCR_ISS_S 16 /* Input Sample Size. */ #define AICCR_ISS_M (0x7 << AICCR_ISS_S) #define AICCR_ISS_16 (0x1 << AICCR_ISS_S) #define AICCR_OSS_S 19 /* Output Sample Size. */ #define AICCR_OSS_M (0x7 << AICCR_OSS_S) #define AICCR_OSS_16 (0x1 << AICCR_OSS_S) #define AICCR_RDMS (1 << 15) /* Receive DMA enable. */ #define AICCR_TDMS (1 << 14) /* Transmit DMA enable. */ #define AICCR_ENLBF (1 << 2) /* Enable AIC Loop Back Function. */ #define AICCR_ERPL (1 << 1) /* Enable Playing Back function. */ #define I2SCR 0x10 /* AIC I2S/MSB-justified Control */ #define I2SCR_ESCLK (1 << 4) /* Enable SYSCLK output. */ #define I2SCR_AMSL (1 << 0) /* Select MSB-Justified Operation Mode. */ #define AICSR 0x14 /* AIC FIFO Status Register Register */ #define I2SSR 0x1C /* AIC I2S/MSB-justified Status Register */ #define I2SDIV 0x30 /* AIC I2S/MSB-justified Clock Divider Register */ #define AICDR 0x34 /* AIC FIFO Data Port Register */ #define SPENA 0x80 /* SPDIF Enable Register */ #define SPCTRL 0x84 /* SPDIF Control Register */ #define SPSTATE 0x88 /* SPDIF Status Register */ #define SPCFG1 0x8C /* SPDIF Configure 1 Register */ #define SPCFG2 0x90 /* SPDIF Configure 2 Register */ #define SPFIFO 0x94 /* SPDIF FIFO Register */