/*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2007-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_INPUT_H_ #define _NET80211_IEEE80211_INPUT_H_ /* Verify the existence and length of __elem or get out. */ #define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen, _action) do { \ if ((__elem) == NULL) { \ IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \ wh, NULL, "%s", "no " #__elem ); \ vap->iv_stats.is_rx_elem_missing++; \ _action; \ } else if ((__elem)[1] > (__maxlen)) { \ IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \ wh, NULL, "bad " #__elem " len %d", (__elem)[1]); \ vap->iv_stats.is_rx_elem_toobig++; \ _action; \ } \ } while (0) #define IEEE80211_VERIFY_LENGTH(_len, _minlen, _action) do { \ if ((_len) < (_minlen)) { \ IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \ wh, NULL, "ie too short, got %d, expected %d", \ (_len), (_minlen)); \ vap->iv_stats.is_rx_elem_toosmall++; \ _action; \ } \ } while (0) #ifdef IEEE80211_DEBUG void ieee80211_ssid_mismatch(struct ieee80211vap *, const char *tag, uint8_t mac[IEEE80211_ADDR_LEN], uint8_t *ssid); #define IEEE80211_VERIFY_SSID(_ni, _ssid, _action) do { \ if ((_ssid)[1] != 0 && \ ((_ssid)[1] != (_ni)->ni_esslen || \ memcmp((_ssid) + 2, (_ni)->ni_essid, (_ssid)[1]) != 0)) { \ if (ieee80211_msg_input(vap)) \ ieee80211_ssid_mismatch(vap, \ ieee80211_mgt_subtype_name(subtype), \ wh->i_addr2, _ssid); \ vap->iv_stats.is_rx_ssidmismatch++; \ _action; \ } \ } while (0) #else /* !IEEE80211_DEBUG */ #define IEEE80211_VERIFY_SSID(_ni, _ssid, _action) do { \ if ((_ssid)[1] != 0 && \ ((_ssid)[1] != (_ni)->ni_esslen || \ memcmp((_ssid) + 2, (_ni)->ni_essid, (_ssid)[1]) != 0)) { \ vap->iv_stats.is_rx_ssidmismatch++; \ _action; \ } \ } while (0) #endif /* !IEEE80211_DEBUG */ #include /* For le16toh() / le32dec() */ static __inline int iswpaoui(const uint8_t *frm) { return frm[1] > 3 && le32dec(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI); } static __inline int iswmeoui(const uint8_t *frm) { return frm[1] > 3 && le32dec(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI); } static __inline int iswmeparam(const uint8_t *frm) { return frm[1] > 5 && le32dec(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) && frm[6] == WME_PARAM_OUI_SUBTYPE; } static __inline int iswmeinfo(const uint8_t *frm) { return frm[1] > 5 && le32dec(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) && frm[6] == WME_INFO_OUI_SUBTYPE; } static __inline int isatherosoui(const uint8_t *frm) { return frm[1] > 3 && le32dec(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI); } static __inline int istdmaoui(const uint8_t *frm) { return frm[1] > 3 && le32dec(frm+2) == ((TDMA_OUI_TYPE<<24)|TDMA_OUI); } static __inline int ishtcapoui(const uint8_t *frm) { return frm[1] > 3 && le32dec(frm+2) == ((BCM_OUI_HTCAP<<24)|BCM_OUI); } static __inline int ishtinfooui(const uint8_t *frm) { return frm[1] > 3 && le32dec(frm+2) == ((BCM_OUI_HTINFO<<24)|BCM_OUI); } static __inline int ieee80211_check_rxseq_amsdu(const struct ieee80211_rx_stats *rxs) { if (rxs == NULL) return 0; return (!! (rxs->c_pktflags & IEEE80211_RX_F_AMSDU)); } /* * Return 1 if the rxseq check should increment the sequence * number. Return 0 if it's part of an AMSDU batch and it isn't * the final frame in the decap'ed burst. */ static __inline int ieee80211_check_rxseq_amsdu_more(const struct ieee80211_rx_stats *rxs) { /* No state? ok */ if (rxs == NULL) return (1); /* State but no AMSDU set? ok */ if ((rxs->c_pktflags & IEEE80211_RX_F_AMSDU) == 0) return (1); /* State, AMSDU set, then _MORE means "don't inc yet" */ if (rxs->c_pktflags & IEEE80211_RX_F_AMSDU_MORE) { return (0); } /* Both are set, so return ok */ return (1); } /* * Check the current frame sequence number against the current TID * state and return whether it's in sequence or should be dropped. * * Since out of order packet and duplicate packet eliminations should * be done by the AMPDU RX code, this routine blindly accepts all * frames from a HT station w/ a TID that is currently doing AMPDU-RX. * HT stations without WME or where the TID is not doing AMPDU-RX * are checked like non-HT stations. * * The routine only eliminates packets whose sequence/fragment * match or are less than the last seen sequence/fragment number * AND are retransmits. It doesn't try to eliminate out of order packets. * * Since all frames after sequence number 4095 will be less than 4095 * (as the seqnum wraps), handle that special case so packets aren't * incorrectly dropped - ie, if the next packet is sequence number 0 * but a retransmit since the initial packet didn't make it. * * XXX TODO: handle sequence number space wrapping with dropped frames; * especially in high interference conditions under high traffic load * The RX AMPDU reorder code also needs it. * * XXX TODO: update for 802.11-2012 9.3.2.10 Duplicate Detection and Recovery. */ static __inline int ieee80211_check_rxseq(struct ieee80211_node *ni, struct ieee80211_frame *wh, uint8_t *bssid, const struct ieee80211_rx_stats *rxs) { #define SEQ_LEQ(a,b) ((int)((a)-(b)) <= 0) #define SEQ_EQ(a,b) ((int)((a)-(b)) == 0) #define SEQNO(a) ((a) >> IEEE80211_SEQ_SEQ_SHIFT) #define FRAGNO(a) ((a) & IEEE80211_SEQ_FRAG_MASK) struct ieee80211vap *vap = ni->ni_vap; uint16_t rxseq; uint8_t type, subtype; uint8_t tid; struct ieee80211_rx_ampdu *rap; rxseq = le16toh(*(uint16_t *)wh->i_seq); type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; /* * Types with no sequence number (or QoS (+)Null frames) * are always treated valid. */ if (! IEEE80211_HAS_SEQ(type, subtype)) return 1; /* * Always allow multicast frames for now - QoS (any TID) * or not. */ if (IEEE80211_IS_MULTICAST(wh->i_addr1)) return 1; tid = ieee80211_gettid(wh); /* * Only do the HT AMPDU check for WME stations; non-WME HT stations * shouldn't exist outside of debugging. We should at least * handle that. */ if (tid < WME_NUM_TID) { rap = &ni->ni_rx_ampdu[tid]; /* HT nodes currently doing RX AMPDU are always valid */ if ((ni->ni_flags & IEEE80211_NODE_HT) && (rap->rxa_flags & IEEE80211_AGGR_RUNNING)) goto ok; } /* * Otherwise, retries for packets below or equal to the last * seen sequence number should be dropped. */ /* * Treat frame seqnum 4095 as special due to boundary * wrapping conditions. */ if (SEQNO(ni->ni_rxseqs[tid]) == 4095) { /* * Drop retransmits on seqnum 4095/current fragment for itself. */ if (SEQ_EQ(rxseq, ni->ni_rxseqs[tid]) && (wh->i_fc[1] & IEEE80211_FC1_RETRY)) goto fail; /* * Treat any subsequent frame as fine if the last seen frame * is 4095 and it's not a retransmit for the same sequence * number. However, this doesn't capture incorrectly ordered * fragments w/ sequence number 4095. It shouldn't be seen * in practice, but see the comment above for further info. */ goto ok; } /* * At this point we assume that retransmitted seq/frag numbers below * the current can simply be eliminated. */ if ((wh->i_fc[1] & IEEE80211_FC1_RETRY) && SEQ_LEQ(rxseq, ni->ni_rxseqs[tid])) goto fail; ok: /* * Only bump the sequence number if it's the last frame * in a batch. That way frames in the rest of the batch * get included, and the last frame in the batch kicks * it next. */ if (ieee80211_check_rxseq_amsdu_more(rxs)) { ni->ni_rxseqs[tid] = rxseq; if ((rxs != NULL) && ieee80211_check_rxseq_amsdu(rxs)) IEEE80211_NODE_STAT(ni, rx_amsdu_more_end); } else { /* .. still waiting */ IEEE80211_NODE_STAT(ni, rx_amsdu_more); } return 1; fail: /* duplicate, discard */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, bssid, "duplicate", "seqno <%u,%u> fragno <%u,%u> tid %u", SEQNO(rxseq), SEQNO(ni->ni_rxseqs[tid]), FRAGNO(rxseq), FRAGNO(ni->ni_rxseqs[tid]), tid); vap->iv_stats.is_rx_dup++; IEEE80211_NODE_STAT(ni, rx_dup); return 0; #undef SEQ_LEQ #undef SEQ_EQ #undef SEQNO #undef FRAGNO } void ieee80211_deliver_data(struct ieee80211vap *, struct ieee80211_node *, struct mbuf *); struct mbuf *ieee80211_defrag(struct ieee80211_node *, struct mbuf *, int, int); struct mbuf *ieee80211_realign(struct ieee80211vap *, struct mbuf *, size_t); struct mbuf *ieee80211_decap(struct ieee80211vap *, struct mbuf *, int, uint8_t); struct mbuf *ieee80211_decap1(struct mbuf *, int *); int ieee80211_setup_rates(struct ieee80211_node *ni, const uint8_t *rates, const uint8_t *xrates, int flags); void ieee80211_send_error(struct ieee80211_node *, const uint8_t mac[IEEE80211_ADDR_LEN], int subtype, int arg); int ieee80211_alloc_challenge(struct ieee80211_node *); int ieee80211_parse_beacon(struct ieee80211_node *, struct mbuf *, struct ieee80211_channel *, struct ieee80211_scanparams *); int ieee80211_parse_action(struct ieee80211_node *, struct mbuf *); #endif /* _NET80211_IEEE80211_INPUT_H_ */