if [ ! "$_DEVICE_SUBR" ]; then _DEVICE_SUBR=1 # # Copyright (c) 2012-2014 Devin Teske # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # # $FreeBSD$ # ############################################################ INCLUDES BSDCFG_SHARE="/usr/share/bsdconfig" . $BSDCFG_SHARE/common.subr || exit 1 f_dprintf "%s: loading includes..." device.subr f_include $BSDCFG_SHARE/dialog.subr f_include $BSDCFG_SHARE/geom.subr f_include $BSDCFG_SHARE/strings.subr f_include $BSDCFG_SHARE/struct.subr BSDCFG_LIBE="/usr/libexec/bsdconfig" f_include_lang $BSDCFG_LIBE/include/messages.subr ############################################################ GLOBALS NDEVICES=0 # Set by f_device_register(), used by f_device_*() # # A "device" from legacy sysinstall's point of view (mostly) # # NB: Disk devices have their `private' property set to GEOM ident # NB: USB devices have their `private' property set to USB disk device name # f_struct_define DEVICE \ capacity \ desc \ devname \ enabled \ flags \ get \ init \ name \ private \ shutdown \ type \ volume # Network devices have their `private' property set to this f_struct_define DEVICE_INFO \ extras \ ipaddr \ ipv6addr \ netmask \ use_dhcp \ use_rtsol # # Device types for f_device_register(), f_device_find(), et al. # setvar DEVICE_TYPE_ANY "any" # Any setvar DEVICE_TYPE_NONE "NONE" # Unknown setvar DEVICE_TYPE_DISK "DISK" # GEOM `DISK' setvar DEVICE_TYPE_FLOPPY "FD" # GEOM `FD' setvar DEVICE_TYPE_FTP "FTP" # Dynamic network device setvar DEVICE_TYPE_NETWORK "NETWORK" # See f_device_get_all_network setvar DEVICE_TYPE_CDROM "CDROM" # GEOM `DISK' setvar DEVICE_TYPE_USB "USB" # GEOM `PART' setvar DEVICE_TYPE_DOS "DOS" # GEOM `DISK' `PART' or `LABEL' setvar DEVICE_TYPE_UFS "UFS" # GEOM `DISK' `PART' or `LABEL' setvar DEVICE_TYPE_NFS "NFS" # Dynamic network device setvar DEVICE_TYPE_HTTP_PROXY "HTTP_PROXY" # Dynamic network device setvar DEVICE_TYPE_HTTP "HTTP" # Dynamic network device # Network devices have the following flags available setvar IF_ETHERNET 1 setvar IF_WIRELESS 2 setvar IF_ACTIVE 4 # # Default behavior is to call f_device_get_all() automatically when loaded. # : ${DEVICE_SELF_SCAN_ALL=1} # # Device Catalog variables # DEVICE_CATALOG_APPEND_ONLY= # Used by f_device_catalog_set() NCATALOG_DEVICES=0 # Used by f_device_catalog_*() and MAIN # # A ``catalog'' device is for mapping GEOM devices to media devices (for # example, determining if a $GEOM_CLASS_DISK geom is $DEVICE_TYPE_CDROM or # $DEVICE_TYPE_DISK) and also getting default descriptions for devices that # either lack a GEOM provided description or lack a presence in GEOM) # f_struct_define CATALOG_DEVICE \ desc \ name \ type ############################################################ FUNCTIONS # f_device_register $var_to_set $name $desc $devname $type $enabled # $init_function $get_function $shutdown_function # $private $capacity # # Register a device. A `structure' (see struct.subr) is created and if # $var_to_set is non-NULL, upon success holds the name of the struct created. # The remaining positional arguments correspond to the properties of the # `DEVICE' structure-type to be assigned (defined above). # # If not already registered (based on $name and $type), a new device is created # and $NDEVICES is incremented. # f_device_register() { local __var_to_set="$1" __name="$2" __desc="$3" __devname="$4" local __type="$5" __enabled="$6" __init_func="$7" __get_func="$8" local __shutdown_func="$9" __private="${10}" __capacity="${11}" # Required parameter(s) [ "$__name" ] || return $FAILURE if [ "$__var_to_set" ]; then setvar "$__var_to_set" "" || return $FAILURE fi local __device if f_device_find -1 "$__name" "$__type" __device; then f_struct_free "$__device" f_struct_new DEVICE "$__device" || return $FAILURE else __device=device_$(( NDEVICES + 1 )) f_struct_new DEVICE "$__device" || return $FAILURE NDEVICES=$(( $NDEVICES + 1 )) fi $__device set name "$__name" $__device set desc "$__desc" $__device set devname "$__devname" $__device set type "$__type" $__device set enabled "$__enabled" $__device set init "$__init_func" $__device set get "$__get_func" $__device set shutdown "$__shutdown_func" $__device set private "$__private" $__device set capacity "$__capacity" [ "$__var_to_set" ] && setvar "$__var_to_set" "$__device" return $SUCCESS } # f_device_reset # # Reset the registered device chain. # f_device_reset() { local n=1 while [ $n -le $NDEVICES ]; do f_device_shutdown device_$n # # XXX This potentially leaks $dev->private if it's being # used to point to something dynamic, but you're not supposed # to call this routine at such times that some open instance # has its private member pointing somewhere anyway. # f_struct_free device_$n n=$(( $n + 1 )) done NDEVICES=0 } # f_device_reset_network # # Reset the registered network device chain. # f_device_reset_network() { local n=1 device type private i while [ $n -le $NDEVICES ]; do device=device_$n f_struct $device || continue $device get type type [ "$type" = "$DEVICE_TYPE_NETWORK" ] || continue # # Leave the device up (don't call shutdown routine) # # Network devices may have DEVICE_INFO private member $device get private private [ "$private" ] && f_struct_free "$private" # Free the network device f_struct_free $device # Fill the gap we just created i=$n while [ $i -lt $NDEVICES ]; do f_struct_copy device_$(( $i + 1 )) device_$i done f_struct_free device_$NDEVICES # Finally decrement the number of devices NDEVICES=$(( $NDEVICES - 1 )) n=$(( $n + 1 )) done } # f_device_get_all # # Get all device information for all devices. # f_device_get_all() { local devname type desc capacity f_dprintf "f_device_get_all: Probing devices..." f_dialog_info "$msg_probing_devices_please_wait_this_can_take_a_while" # First go for the network interfaces f_device_get_all_network # Next, go for the GEOM devices we might want to use as media local geom geoms geom_name debug= f_geom_find "" $GEOM_CLASS_DEV geoms for geom in $geoms; do if ! f_device_probe_geom $geom; then debug= $geom get name geom_name f_dprintf "WARNING! Unable to classify %s as %s" \ "GEOM device $geom_name" "media source" fi done } # f_device_get_all_network # # Get all network device information for attached network devices. # f_device_get_all_network() { local devname desc device flags for devname in $( ifconfig -l ); do # Eliminate network devices that don't make sense case "$devname" in lo*) continue ;; esac # Try and find its description f_device_desc "$devname" $DEVICE_TYPE_NETWORK desc f_dprintf "Found network device named %s" "$devname" debug= f_device_register device $devname "$desc" \ "$devname" $DEVICE_TYPE_NETWORK 1 \ f_media_init_network "" f_media_shutdown_network "" -1 # Set flags based on media and status flags=0 eval "$( ifconfig $devname 2> /dev/null | awk -v var=flags ' function _or(var, mask) { printf "%s=$(( $%s | $%s ))\n", var, var, mask } BEGIN { S = "[[:space:]]+" } { if (!match($0, "^" S "(media|status):" S)) next value = substr($0, RLENGTH + 1) if ($1 == "media:") { if (value ~ /Ethernet/) _or(var, "IF_ETHERNET") if (value ~ /802\.11/) _or(var, "IF_WIRELESS") } else if ($1 == "status:") { if (value ~ /^active/) _or(var, "IF_ACTIVE") } }' )" $device set flags $flags done } # f_device_rescan # # Rescan all devices, after closing previous set - convenience function. # f_device_rescan() { f_device_reset f_geom_rescan f_device_get_all } # f_device_rescan_network # # Rescan all network devices, after closing previous set - for convenience. # f_device_rescan_network() { f_device_reset_network f_device_get_all_network } # f_device_probe_geom $geom # # Probe a single GEOM device and if it can be classified as a media source, # register it using f_device_register() with known type-specific arguments. # f_device_probe_geom() { local geom="$1" f_struct "$geom" || return $FAILURE # geom associated variables local geom_name geom_consumer provider_ref geom_provider= local provider_geom provider_config provider_class= local provider_config_type catalog_struct catalog_type local disk_ident # gnop(8)/geli(8) associated variables (p for `parent device') local p_devname p_geom p_consumer p_provider_ref p_provider local p_provider_config p_provider_geom p_provider_class # md(4) associated variables local config config_type config_file magic= # Temporarily disable debugging to keep debug output light local old_debug="$debug" debug= # # Get the GEOM name (for use below in device registration) # $geom get name devname || continue # # Attempt to get the consumer, provider, provider config, and # provider class for this geom (errors ignored). # # NB: Each GEOM in the `DEV' class should have one consumer. # That consumer should have a reference to its provider. # $geom get consumer1 geom_consumer f_struct "$geom_consumer" get provider_ref provider_ref && f_geom_find_by id "$provider_ref" provider geom_provider if f_struct "$geom_provider"; then $geom_provider get config provider_config f_geom_parent $geom_provider provider_geom && f_geom_parent $provider_geom provider_class fi # # Get values for device registration (errors ignored) # f_struct "$provider_class" get name type f_struct "$geom_provider" get mediasize capacity f_struct "$provider_config" get descr desc # # For gnop(8), geli(8), or combination thereof, change device type to # that of the consumer # p_devname= p_geom= p_provider= p_provider_config= case "$devname" in *.nop.eli) p_devname="${devname%.nop.eli}" ;; *.eli.nop) p_devname="${devname%.eli.nop}" ;; *.eli) p_devname="${devname%.eli}" ;; *.nop) p_devname="${devname%.nop}" ;; esac [ "$p_devname" ] && f_geom_find "$p_devname" $GEOM_CLASS_DEV p_geom if [ "${p_geom:-$geom}" != "$geom" ]; then f_struct "$p_geom" get consumer1 p_consumer f_struct "$p_consumer" get provider_ref p_provider_ref && f_geom_find_by id "$p_provider_ref" provider p_provider if f_struct "$p_provider"; then $p_provider get config p_provider_config f_geom_parent $p_provider p_provider_geom && f_geom_parent $p_provider_geom p_provider_class fi f_struct "$p_provider_class" get name type fi # Look up geom device in device catalog for default description f_device_catalog_get \ $DEVICE_TYPE_ANY "${p_devname:-$devname}" catalog_struct [ "$desc" ] || f_struct "catalog_device_$catalog_struct" get desc desc # Use device catalog entry for potential re-classification(s) f_struct "catalog_device_$catalog_struct" get type catalog_type # Restore debugging for this next part (device registration) debug="$old_debug" # # Register the device # local retval device case "$type" in $GEOM_CLASS_DISK) # First attempt to classify by device catalog (see MAIN) case "$catalog_type" in $DEVICE_TYPE_CDROM) f_dprintf "Found CDROM device for disk %s" "$devname" debug= f_device_register device "$devname" "$desc" \ "/dev/$devname" $DEVICE_TYPE_CDROM 1 \ f_media_init_cdrom f_media_get_cdrom \ f_media_shutdown_cdrom "" "$capacity" && return $SUCCESS ;; esac # Fall back to register label device as a disk and taste it f_dprintf "Found disk device named %s" "$devname" debug= f_struct "$p_provider_config" get \ ident disk_ident || debug= f_struct "$provider_config" get \ ident disk_ident debug= f_device_register device "$devname" "$desc" \ "/dev/$devname" $DEVICE_TYPE_DISK 1 \ "" "" "" "$disk_ident" "$capacity" retval=$? # Detect ``dangerously dedicated'' filesystems (errors ignored) f_device_probe_disk_fs device "$devname" "$capacity" && retval=$SUCCESS return $retval ;; $GEOM_CLASS_FD) f_dprintf "Found floppy device named %s" "$devname" debug= f_device_register device "$devname" "$desc" \ "/dev/$devname" $DEVICE_TYPE_FLOPPY 1 \ f_media_init_floppy f_media_get_floppy \ f_media_shutdown_floppy "" "$capacity" return $? ;; $GEOM_CLASS_LABEL) : fall through to below section # reduces indentation level ;; $GEOM_CLASS_MD) f_dprintf "Found disk device named %s" "$devname" debug= f_device_register device "$devname" "$desc" \ "/dev/$devname" $DEVICE_TYPE_DISK 1 \ "" "" "" "" "$capacity" retval=$? # # Attempt to get file(1) magic to potentially classify as # alternate media type. If unable to get magic, fall back to # md(4) characteristics (such as vnode filename). # [ -r "/dev/$devname" ] && magic=$( file -bs "/dev/$devname" 2> /dev/null ) if [ ! "$magic" ]; then # Fall back to md(4) characteristics if f_struct "$p_provider_config"; then config="$p_provider_config" else config="$provider_config" fi debug= f_struct "$config" get type config_type debug= f_struct "$config" get file config_file # Substitute magic for below based on type and file case "$config_type=$config_file" in vnode=*.iso) magic="ISO 9660" ;; esac fi f_device_probe_disk_fs device \ "$devname" "$capacity" "$magic" && retval=$SUCCESS # Errors ignored return $retval ;; $GEOM_CLASS_PART) if f_struct "$p_provider_config"; then config="$p_provider_config" else config="$provider_config" fi debug= f_struct "$config" get type provider_config_type f_device_probe_geom_part device \ "$provider_config_type" "$devname" "$capacity" retval=$? device_type=$DEVICE_TYPE_NONE [ $retval -eq $SUCCESS ] && debug= f_struct "$device" get type device_type # Potentially re-classify as USB device if [ "$device_type" = "$DEVICE_TYPE_UFS" -a \ "$catalog_type" = "$DEVICE_TYPE_USB" ] then f_dprintf "Found USB device for partition %s" \ "$devname" debug= f_struct "$p_provider_geom" get \ name disk_name || debug= f_struct "$provider_geom" get \ name disk_name debug= f_device_register device "$devname" "$desc" \ "/dev/$devname" $DEVICE_TYPE_USB 1 \ f_media_init_usb f_media_get_usb \ f_media_shutdown_usb "$disk_name" "$capacity" retval=$? fi return $retval ;; $GEOM_CLASS_RAID) # Use the provider geom name as the description if [ ! "$desc" ]; then f_struct "$p_provider_geom" get name desc || f_struct "$provider_geom" get name desc fi f_dprintf "Found disk device named %s" "$devname" debug= f_device_register device \ "$devname" "${desc:-GEOM RAID device}" \ "/dev/$devname" $DEVICE_TYPE_DISK 1 \ "" "" "" "" "$capacity" retval=$? # Detect ``dangerously dedicated'' filesystems f_device_probe_disk_fs device "$devname" "$capacity" && retval=$SUCCESS # Errors ignored return $retval ;; $GEOM_CLASS_ZFS_ZVOL) f_dprintf "Found disk device named %s" "$devname" debug= f_device_register device \ "$devname" "${desc:-GEOM ZFS::ZVOL device}" \ "/dev/$devname" $DEVICE_TYPE_DISK 1 \ "" "" "" "" "$capacity" retval=$? # Detect ``dangerously dedicated'' filesystems f_device_probe_disk_fs device "$devname" "$capacity" && retval=$SUCCESS # Errors ignored return $retval ;; *) return $FAILURE # Unknown GEOM class esac # # Still here? Must be $GEOM_CLASS_LABEL # local label_geom label_devname label_devgeom= label_devconsumer local label_devprovider= label_devprovider_ref label_devprovider_config local label_gpart_type if f_struct "$p_provider"; then label_geom="$p_provider_geom" else label_geom="$provider_geom" fi case "$devname" in gpt/*|gptid/*) # # Attempt to get the partition type by getting the `config' # member of the provider for our device (which is named in the # parent geom of our current provider). # debug= f_struct "$label_geom" get name label_devname && debug= f_geom_find "$label_devname" $GEOM_CLASS_DEV \ label_devgeom debug= f_struct "$label_devgeom" get \ consumer1 label_devconsumer debug= f_struct "$label_devconsumer" get \ provider_ref label_devprovider_ref && debug= f_geom_find_by id "$label_devprovider_ref" \ provider label_devprovider debug= f_struct "$label_devprovider" get \ config label_devprovider_config debug= f_struct "$label_devprovider_config" get \ type label_gpart_type # # Register device label based on partition type # f_device_probe_geom_part device \ "$label_gpart_type" "$devname" "$capacity" return $? ;; iso9660/*) f_dprintf "Found CDROM device labeled %s" "$devname" debug= f_device_register device \ "$devname" "ISO9660 file system" \ "/dev/$devname" $DEVICE_TYPE_CDROM 1 \ f_media_init_cdrom f_media_get_cdrom \ f_media_shutdown_cdrom "" "$capacity" return $? ;; label/*) # For generic labels, use provider geom name as real device debug= f_struct "$label_geom" get name label_devname # Look up label geom device in device catalog for default desc debug= f_device_catalog_get \ $DEVICE_TYPE_ANY "$label_devname" catalog_struct [ "$desc" ] || debug= f_struct \ "catalog_device_$catalog_struct" get desc desc # Use device catalog entry for potential re-classification(s) debug= f_struct "catalog_device_$catalog_struct" get \ type catalog_type # First attempt to classify by device catalog (see MAIN) case "$catalog_type" in $DEVICE_TYPE_CDROM) f_dprintf "Found CDROM device for disk %s" "$devname" debug= f_device_register device "$devname" "$desc" \ "/dev/$devname" $DEVICE_TYPE_CDROM 1 \ f_media_init_cdrom f_media_get_cdrom \ f_media_shutdown_cdrom "" "$capacity" && return $SUCCESS ;; esac # Fall back to register label device as a disk and taste it f_dprintf "Found disk device labeled %s" "$devname" debug= f_device_register device \ "$devname" "GEOM LABEL device" \ "/dev/$devname" $DEVICE_TYPE_DISK 1 \ "" "" "" "" "$capacity" retval=$? # Detect ``dangerously dedicated'' filesystems (errors ignored) f_device_probe_disk_fs device "$devname" "$capacity" && retval=$SUCCESS return $retval ;; msdosfs/*) f_dprintf "Found DOS partition labeled %s" "$devname" debug= f_device_register device "$devname" "DOS file system" \ "/dev/$devname" $DEVICE_TYPE_DOS 1 \ f_media_init_dos f_media_get_dos \ f_media_shutdown_dos "" "$capacity" return $? ;; ufs/*|ufsid/*) f_dprintf "Found UFS partition labeled %s" "$devname" debug= f_device_register device "$devname" "UFS file system" \ "/dev/$devname" $DEVICE_TYPE_UFS 1 \ f_media_init_ufs f_media_get_ufs \ f_media_shutdown_ufs "" "$capacity" return $? ;; ext2fs/*|ntfs/*|reiserfs/*) return $FAILURE # No media device handlers for these labels ;; esac # Unable to classify GEOM label return $FAILURE } # f_device_probe_geom_part $var_to_set $gpart_type $devname $capacity [$magic] # # Given a gpart(8) partition type and a device name, register the device if it # is a known partition type that we can handle. If $var_to_set is non-NULL, # upon success holds the DEVICE struct name of the registered device. # # Returns success if the device was successfully registered, failure otherwise. # f_device_probe_geom_part() { local __var_to_set="$1" __gpart_type="$2" __devname="$3" local __capacity="${4:--1}" __magic="$5" # # Register device based on partition type # NB: !0 equates to `unused' bsdlabel # case "$__gpart_type" in fat16|fat32) f_dprintf "Found DOS partition named %s" "$__devname" debug= f_device_register "$__var_to_set" \ "$__devname" "DOS file system" \ "/dev/$__devname" $DEVICE_TYPE_DOS 1 \ f_media_init_dos f_media_get_dos \ f_media_shutdown_dos "" "$__capacity" return $? ;; freebsd|!0) # Commonly used inappropriately, taste for FreeBSD [ -r "/dev/$__devname" -a ! "$__magic" ] && __magic=$( file -bs "/dev/$__devname" 2> /dev/null ) case "$__magic" in *"Unix Fast File system"*) f_dprintf "Found UFS partition named %s" "$__devname" debug= f_device_register "$__var_to_set" \ "$__devname" "UFS file system" \ "/dev/$__devname" $DEVICE_TYPE_UFS 1 \ f_media_init_ufs f_media_get_ufs \ f_media_shutdown_ufs "" "$__capacity" return $? esac return $FAILURE ;; freebsd-ufs) f_dprintf "Found UFS partition named %s" "$__devname" debug= f_device_register "$__var_to_set" \ "$__devname" "UFS file system" \ "/dev/$__devname" $DEVICE_TYPE_UFS 1 \ f_media_init_ufs f_media_get_ufs \ f_media_shutdown_ufs "" "$__capacity" return $? ;; apple-*|linux-*|ms-*|netbsd-*|ntfs|vmware-*) return $FAILURE # No device types for these ;; bios-*|ebr|efi|mbr|freebsd-boot|freebsd-swap) return $FAILURE # Not a source for media ;; freebsd-nandfs|freebsd-vinum|freebsd-zfs) return $FAILURE # Unsupported as media source ;; esac return $FAILURE # Unknown partition type } # f_device_probe_disk_fs $var_to_set $devname [$capacity [$magic]] # # Given a device name, taste it and register the device if it is a so-called # ``dangerously dedicated'' file system written without a partition table. # Tasting is done using file(1) (specifically `file -bs') but if $magic is # present and non-NULL it is used instead. If $var_to_set is non-NULL, upon # success holds the DEVICE struct name of the registered device. # # Returns success if the device was successfully registered, failure otherwise. # f_device_probe_disk_fs() { local __var_to_set="$1" __devname="$2" __capacity="${3:--1}" local __magic="$4" [ -r "/dev/${__devname#/dev/}" -a ! "$__magic" ] && __magic=$( file -bs "/dev/$__devname" 2> /dev/null ) case "$__magic" in *"ISO 9660"*) f_dprintf "Found CDROM device for disk %s" "$__devname" debug= f_device_register "$__var_to_set" \ "$__devname" "ISO9660 file system" \ "/dev/$__devname" $DEVICE_TYPE_CDROM 1 \ f_media_init_cdrom f_media_get_cdrom \ f_media_shutdown_cdrom "" "$__capacity" return $? ;; *"Unix Fast File system"*) f_dprintf "Found UFS device for disk %s" "$__devname" debug= f_device_register "$__var_to_set" \ "$__devname" "UFS file system" \ "/dev/$__devname" $DEVICE_TYPE_UFS 1 \ f_media_init_ufs f_media_get_ufs \ f_media_shutdown_ufs "" "$__capacity" return $? ;; *"FAT (12 bit)"*|*"FAT (16 bit)"*|*"FAT (32 bit)"*) f_dprintf "Found DOS device for disk %s" "$__devname" debug= f_device_register "$__var_to_set" \ "$__devname" "DOS file system" \ "/dev/$__devname" $DEVICE_TYPE_DOS 1 \ f_media_init_dos f_media_get_dos \ f_media_shutdown_dos "" "$__capacity" return $? ;; esac return $FAILURE # Unknown file system type } # f_device_catalog_get $type $name [$var_to_set] # # Fetch the struct name of the catalog device matching device $name. If $type # is either NULL, missing, or set to $DEVICE_TYPE_ANY then only $name is used. # Returns success if a match was found, otherwise failure. # # If $var_to_set is missing or NULL, the struct name is printed to standard out # for capturing in a sub-shell (which is less-recommended because of # performance degredation; for example, when called in a loop). # f_device_catalog_get() { local __type="$1" __name="$2" __var_to_set="$3" local __dname= # Return failure if no $name [ "$__name" ] || return $FAILURE # Disable debugging to keep debug output light local debug= # # Attempt to create an alternate-form of $__name that contains the # first contiguous string of numbers replaced with `%d' for comparison # against stored pattern names (see MAIN). # local __left="${__name%%[0-9]*}" __right="${__name#*[0-9]}" if [ "$__left" != "$__name" ]; then # Chop leading digits from right 'til we hit first non-digit while :; do case "$__right" in [0-9]*) __right="${__right#[0-9]}" ;; *) break esac done __dname="${__left}%d$__right" fi [ "$__type" = "$DEVICE_TYPE_ANY" ] && __type= local __dev __dev_name __dev_type for __dev in $DEVICE_CATALOG; do catalog_device_$__dev get name __dev_name [ "$__dev_name" = "$__name" -o "$__dev_name" = "$__dname" ] || continue catalog_device_$__dev get type __dev_type [ "${__type:-$__dev_type}" = "$__dev_type" ] || continue if [ "$__var_to_set" ]; then setvar "$__var_to_set" $__dev else echo $__dev fi return $? done [ "$__var_to_set" ] && setvar "$__var_to_set" "" return $FAILURE } # f_device_catalog_set $type $name $desc # # Store a description (desc) in-association with device $type and $name. # Returns success unless $name is NULL or missing. Use f_device_catalog_get() # routine with the same $name and optionally $type to retrieve catalog device # structure (see CATALOG_DEVICE struct definition in GLOBALS section). # f_device_catalog_set() { local type="$1" name="$2" desc="$3" local struct dev dev_type found= [ "$name" ] || return $FAILURE # Disable debugging to keep debug output light local debug= f_str2varname "$name" struct if [ ! "$DEVICE_CATALOG_APPEND_ONLY" ]; then for dev in $DEVICE_CATALOG; do [ "$dev" = "$struct" ] || continue found=1 break done fi if [ "$found" ]; then f_struct_free "catalog_device_$struct" else DEVICE_CATALOG="$DEVICE_CATALOG $struct" fi f_struct_new CATALOG_DEVICE "catalog_device_$struct" || return $FAILURE catalog_device_$struct set type "$type" catalog_device_$struct set name "$name" catalog_device_$struct set desc "$desc" return $SUCCESS } # f_device_desc $device_name $device_type [$var_to_set] # # Print a description for a device name (eg., `fxp0') given a specific device # type/class. # # If $var_to_set is missing or NULL, the device description is printed to # standard out for capturing in a sub-shell (which is less-recommended because # of performance degredation; for example, when called in a loop). # f_device_desc() { local __name="$1" __type="$2" __var_to_set="$3" local __devname __devunit __cp # Check variables [ "$__name" ] || return $SUCCESS [ "$__type" = "$DEVICE_TYPE_ANY" ] && type= [ "$__var_to_set" ] && { setvar "$__var_to_set" "" || return; } # # Return sysctl MIB dev.NAME.UNIT.%desc if it exists, otherwise fall # through to further alternate methods. # if f_have sysctl; then __devname="${__name%%[0-9]*}" __devunit="${__name#$__devname}" __devunit="${__devunit%%[!0-9]*}" if [ "$__var_to_set" ]; then if __cp=$( sysctl -n "dev.$__devname.$__devunit.%desc" \ 2> /dev/null ); then setvar "$__var_to_set" "$__cp" && return $SUCCESS fi else sysctl -n "dev.$__devname.$__devunit.%desc" \ 2> /dev/null && return $SUCCESS fi fi # Look up device in catalog for default description local __catalog_struct debug= f_device_catalog_get "$__type" "$__name" __catalog_struct debug= f_struct "catalog_device_$__catalog_struct" get \ desc "$__var_to_set" && return $SUCCESS # # Sensible fall-backs for specific types # case "$__type" in $DEVICE_TYPE_CDROM) __cp="" ;; $DEVICE_TYPE_DISK) __cp="" ;; $DEVICE_TYPE_FLOPPY) __cp="" ;; $DEVICE_TYPE_USB) __cp="" ;; $DEVICE_TYPE_NETWORK) __cp="" ;; *) __cp="" esac if [ "$__var_to_set" ]; then setvar "$__var_to_set" "$__cp" else echo "$__cp" fi return $FAILURE } # f_device_is_ethernet $device # # Returns true if $device is a wired Ethernet network interface. Otherwise # returns false. Example wired interfaces include: fxp0 em0 bge0 rl0 etc. # f_device_is_ethernet() { local dev="$1" type flags # Make sure we have an actual device by that name f_struct "$dev" || return $FAILURE # Make sure that the device is a network device $dev get type type [ "$type" = "$DEVICE_TYPE_NETWORK" ] || return $FAILURE # Make sure that the media flags indicate that it is Ethernet $dev get flags flags [ $(( ${flags:-0} & $IF_ETHERNET )) -eq $IF_ETHERNET ] } # f_device_is_wireless $device # # Returns true if $device is a Wireless network interface. Otherwise returns # false. Examples of wireless interfaces include: iwn0 # f_device_is_wireless() { local dev="$1" type flags # Make sure we have an actual device by that name f_struct "$dev" || return $FAILURE # Make sure that the device is a network device $dev get type type [ "$type" = "$DEVICE_TYPE_NETWORK" ] || return $FAILURE # Make sure that the media flags indicate that it is 802.11 wireless $dev get flags flags [ $(( ${flags:-0} & $IF_WIRELESS )) -eq $IF_WIRELESS ] } # f_device_is_active $device # # Returns true if $device is active. Otherwise returns false. Currently this # only works for network interfaces. # f_device_is_active() { local dev="$1" type flags=0 # Make sure we have an actual device by that name f_struct "$dev" || return $FAILURE $dev get type type case "$type" in $DEVICE_TYPE_NETWORK) # Make sure that the media flags indicate that it is active $dev get flags flags [ $(( ${flags:-0} & $IF_ACTIVE )) -eq $IF_ACTIVE ] ;; *) return $FAILURE esac } # f_device_find [-1] $name [$type [$var_to_set]] # # Find one or more registered devices by name, type, or both. Returns a space- # separated list of devices matching the search criterion. # # If `-1' option flag is given, only the first matching device is returned. # # If $var_to_set is missing or NULL, the device name(s) are printed to standard # out for capturing in a sub-shell (which is less-recommended because of # performance degredation; for example, when called in a loop). # f_device_find() { local OPTIND OPTARG flag only_one= while getopts 1 flag; do case "$flag" in 1) only_one=1 ;; esac done shift $(( $OPTIND - 1 )) local __name="$1" __type="${2:-$DEVICE_TYPE_ANY}" __var_to_set="$3" local __n=1 __devname __devtype __found= while [ $__n -le $NDEVICES ]; do device_$__n get name __devname device_$__n get type __devtype if [ "$__name" = "$__devname" -o ! "$__name" ] && [ "$__type" = "$DEVICE_TYPE_ANY" -o \ "$__type" = "$__devtype" ] then __found="$__found device_$__n" [ "$only_one" ] && break fi __n=$(( $__n + 1 )) done if [ "$__var_to_set" ]; then setvar "$__var_to_set" "${__found# }" else echo $__found fi [ "$__found" ] # Return status } # f_device_init $device # # Initialize a device by evaluating its `init' function. The $device argument # is a DEVICE struct name. # f_device_init() { local device="$1" init_func f_struct "$device" || return $? $device get init init_func ${init_func:-:} "$device" } # f_device_get $device $file [$probe] # # Read $file by evaluating the device's `get' function. The file is commonly # produced on standard output (but it truly depends on the function called). # The $device argument is a DEVICE struct name. # f_device_get() { local device="$1" file="$2" probe="$3" get_func f_struct "$device" || return $? $device get get get_func ${get_func:-:} "$device" "$file" ${3+"$probe"} } # f_device_shutdown $device # # Shutdown a device by evaluating its `shutdown' function. The $device argument # is a DEVICE struct name. # f_device_shutdown() { local device="$1" shutdown_func f_struct "$device" || return $? $device get shutdown shutdown_func ${shutdown_func:-:} "$device" } # f_devices_sort_by $property $var_to_get [$var_to_set] # # Take list of devices from $var_to_get (separated by whitespace, newline # included) and sort them by $property (e.g., `name'). The sorted list of # DEVICE struct names is returned on standard output separated by whitespace # (newline to be specific) unless $var_to_set is present and non-NULL. # # This function is a two-parter. Below is the awk(1) portion of the function, # afterward is the sh(1) function which utilizes the below awk script. # f_device_sort_by_awk=' # Variables that should be defined on the invocation line: # -v prop="property" function _asorti(src, dest) { k = nitems = 0 for (i in src) dest[++nitems] = i for (i = 1; i <= nitems; k = i++) { idx = dest[i] while ((k > 0) && (dest[k] > idx)) { dest[k+1] = dest[k]; k-- } dest[k+1] = idx } return nitems } { split($0, devs, FS) for (d in devs) { name = ENVIRON["_struct_value_" devs[d] "_" prop] devices[name] = devs[d] } } END { nitems = _asorti(devices, devices_sorted) for (i = 1; i <= nitems; i++) print devices[devices_sorted[i]] } ' f_device_sort_by() { local __property="${1:-name}" __var_to_get="$2" __var_to_set="$3" f_isset "$__var_to_get" || return $FAILURE local __dev for __dev in $( f_getvar "$__var_to_get" ); do export _struct_value_${__dev}_$__property done local __cp setvar "${__var_to_set:-__cp}" "$( f_getvar "$__var_to_get" | awk -v prop="$__property" "$f_device_sort_by_awk" )" [ "$__var_to_set" ] || echo "$__cp" } # f_device_menu $title $prompt $hline $device_type [$helpfile] # # Display a menu listing all the devices of a certain type in the system. # f_device_menu() { f_dialog_title "$1" local title="$DIALOG_TITLE" btitle="$DIALOG_BACKTITLE" f_dialog_title_restore local prompt="$2" hline="$3" type="$4" helpfile="$5" local devs f_device_find "" "$type" devs || return $DIALOG_CANCEL local name desc menu_list= f_device_sort_by name devs devs for dev in $devs; do $dev get name name $dev get desc desc f_shell_escape "$name" name f_shell_escape "$desc" desc menu_list="$menu_list '$name' '$desc'" # END-QUOTE done menu_list="${menu_list#$NL}" local height width rows eval f_dialog_menu_size height width rows \ \"\$title\" \ \"\$btitle\" \ \"\$prompt\" \ \"\$hline\" \ $menu_list local errexit= case $- in *e*) errexit=1; esac set +e local mtag while :; do mtag=$( eval $DIALOG \ --title \"\$title\" \ --backtitle \"\$btitle\" \ --hline \"\$hline\" \ --ok-label \"\$msg_ok\" \ --cancel-label \"\$msg_cancel\" \ ${helpfile:+ \ --help-button \ --help-label \"\$msg_help\" \ ${USE_XDIALOG:+--help \"\"} \ } \ --menu \"\$prompt\" \ $height $width $rows \ $menu_list \ 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD ) local retval=$? [ $retval -ne $DIALOG_HELP ] && break # Otherwise, the Help button was pressed f_show_help "$helpfile" # ...then loop back to menu done f_dprintf "retval=%u mtag=[%s]" $retval "$mtag" [ "$errexit" ] && set -e if [ $retval -eq $DIALOG_OK ]; then # Clean up the output of [X]dialog(1) f_dialog_data_sanitize mtag # Map the user's choice back to a struct name local index device index=$( eval f_dialog_menutag2index \"\$mtag\" $menu_list ) device=$( set -- $devs; eval echo \${$index} ) echo "$device" >&2 fi return $retval } # # Short-hand # f_cdrom() { f_device_catalog_set $DEVICE_TYPE_CDROM "$1" "$2"; } f_disk() { f_device_catalog_set $DEVICE_TYPE_DISK "$1" "$2"; } f_floppy() { f_device_catalog_set $DEVICE_TYPE_FLOPPY "$1" "$2"; } f_usb() { f_device_catalog_set $DEVICE_TYPE_USB "$1" "$2"; } f_network() { f_device_catalog_set $DEVICE_TYPE_NETWORK "$1" "$2"; } ############################################################ MAIN # # The below classifications allow us to re-group the GEOM devices from the # `DEV' GEOM class appropriately while providing fall-back descriptions both # for making the below code more maintainable and handling the rare case the # GEOM device lacks a description. # DEVICE_CATALOG_APPEND_ONLY=1 # Make initial loading faster # CDROM, Disk, Floppy, and USB devices/names f_cdrom "cd%d" "SCSI CDROM drive" f_cdrom "mcd%d" "Mitsumi (old model) CDROM drive" f_cdrom "scd%d" "Sony CDROM drive - CDU31/33A type" f_disk "aacd%d" "Adaptec FSA RAID array" f_disk "ada%d" "ATA/SATA disk device" f_disk "amrd%d" "AMI MegaRAID drive" f_disk "da%d" "SCSI disk device" f_disk "idad%d" "Compaq RAID array" f_disk "ipsd%d" "IBM ServeRAID RAID array" f_disk "md%d" "md(4) disk device" f_disk "mfid%d" "LSI MegaRAID SAS array" f_disk "mlxd%d" "Mylex RAID disk" f_disk "twed%d" "3ware ATA RAID array" f_disk "vtbd%d" "VirtIO Block Device" f_floppy "fd%d" "Floppy Drive unit A" f_usb "da%da" "USB Mass Storage Device" # Network interfaces/names f_network "ae%d" "Attansic/Atheros L2 Fast Ethernet" f_network "age%d" "Attansic/Atheros L1 Gigabit Ethernet" f_network "alc%d" "Atheros AR8131/AR8132 PCIe Ethernet" f_network "ale%d" "Atheros AR8121/AR8113/AR8114 PCIe Ethernet" f_network "an%d" "Aironet 4500/4800 802.11 wireless adapter" f_network "ath%d" "Atheros IEEE 802.11 wireless adapter" f_network "aue%d" "ADMtek USB Ethernet adapter" f_network "axe%d" "ASIX Electronics USB Ethernet adapter" f_network "bce%d" "Broadcom NetXtreme II Gigabit Ethernet card" f_network "bfe%d" "Broadcom BCM440x PCI Ethernet card" f_network "bge%d" "Broadcom BCM570x PCI Gigabit Ethernet card" f_network "bm%d" "Apple BMAC Built-in Ethernet" f_network "bwn%d" "Broadcom BCM43xx IEEE 802.11 wireless adapter" f_network "cas%d" "Sun Cassini/Cassini+ or NS DP83065 Saturn Ethernet" f_network "cc3i%d" "SDL HSSI sync serial PCI card" f_network "cue%d" "CATC USB Ethernet adapter" f_network "cxgb%d" "Chelsio T3 10Gb Ethernet card" f_network "dc%d" "DEC/Intel 21143 (and clones) PCI Fast Ethernet card" f_network "de%d" "DEC DE435 PCI NIC or other DC21040-AA based card" f_network "disc%d" "Software discard network interface" f_network "ed%d" "Novell NE1000/2000; 3C503; NE2000-compatible PCMCIA" f_network "el%d" "3Com 3C501 Ethernet card" f_network "em%d" "Intel(R) PRO/1000 Ethernet card" f_network "en%d" "Efficient Networks ATM PCI card" f_network "ep%d" "3Com 3C509 Ethernet card/3C589 PCMCIA" f_network "et%d" "Agere ET1310 based PCI Express Gigabit Ethernet card" f_network "ex%d" "Intel EtherExpress Pro/10 Ethernet card" f_network "fe%d" "Fujitsu MB86960A/MB86965A Ethernet card" f_network "fpa%d" "DEC DEFPA PCI FDDI card" f_network "fwe%d" "FireWire Ethernet emulation" f_network "fwip%d" "IP over FireWire" f_network "fxp%d" "Intel EtherExpress Pro/100B PCI Fast Ethernet card" f_network "gem%d" "Apple GMAC or Sun ERI/GEM Ethernet adapter" f_network "hme%d" "Sun HME (Happy Meal Ethernet) Ethernet adapter" f_network "ie%d" "AT&T StarLAN 10 and EN100; 3Com 3C507; NI5210" f_network "igb%d" "Intel(R) PRO/1000 PCI Express Gigabit Ethernet card" f_network "ipw%d" "Intel PRO/Wireless 2100 IEEE 802.11 adapter" f_network "iwi%d" "Intel PRO/Wireless 2200BG/2225BG/2915ABG adapter" f_network "iwn%d" "Intel Wireless WiFi Link 4965AGN IEEE 802.11n adapter" f_network "ix%d" "Intel Etherexpress Ethernet card" f_network "ixgb%d" "Intel(R) PRO/10Gb Ethernet card" f_network "ixgbe%d" "Intel(R) PRO/10Gb Ethernet card" f_network "jme%d" "JMicron JMC250 Gigabit/JMC260 Fast Ethernet" f_network "kue%d" "Kawasaki LSI USB Ethernet adapter" f_network "le%d" "AMD Am7900 LANCE or Am79C9xx PCnet Ethernet adapter" f_network "lge%d" "Level 1 LXT1001 Gigabit Ethernet card" f_network "lnc%d" "Lance/PCnet (Isolan/Novell NE2100/NE32-VL) Ethernet" f_network "lo%d" "Loop-back (local) network interface" f_network "lp%d" "Parallel Port IP (PLIP) peer connection" f_network "malo%d" "Marvell Libertas 88W8335 802.11 wireless adapter" f_network "msk%d" "Marvell/SysKonnect Yukon II Gigabit Ethernet" f_network "mxge%d" "Myricom Myri10GE 10Gb Ethernet card" f_network "nfe%d" "NVIDIA nForce MCP Ethernet" f_network "ng%d" "Vimage netgraph(4) bridged Ethernet device" f_network "nge%d" "NatSemi PCI Gigabit Ethernet card" f_network "nve%d" "NVIDIA nForce MCP Ethernet" f_network "nxge%d" "Neterion Xframe 10GbE Server/Storage adapter" f_network "pcn%d" "AMD Am79c79x PCI Ethernet card" f_network "plip%d" "Parallel Port IP (PLIP) peer connection" f_network "ral%d" "Ralink Technology IEEE 802.11 wireless adapter" f_network "ray%d" "Raytheon Raylink 802.11 wireless adapter" f_network "re%d" "RealTek 8139C+/8169/8169S/8110S PCI Ethernet adapter" f_network "rl%d" "RealTek 8129/8139 PCI Ethernet card" f_network "rue%d" "RealTek USB Ethernet card" f_network "rum%d" "Ralink Technology USB IEEE 802.11 wireless adapter" f_network "sf%d" "Adaptec AIC-6915 PCI Ethernet card" f_network "sge%d" "Silicon Integrated Systems SiS190/191 Ethernet" f_network "sis%d" "SiS 900/SiS 7016 PCI Ethernet card" f_network "sk%d" "SysKonnect PCI Gigabit Ethernet card" f_network "sn%d" "SMC/Megahertz Ethernet card" f_network "snc%d" "SONIC Ethernet card" f_network "sr%d" "SDL T1/E1 sync serial PCI card" f_network "ste%d" "Sundance ST201 PCI Ethernet card" f_network "stge%d" "Sundance/Tamarack TC9021 Gigabit Ethernet" f_network "ti%d" "Alteon Networks PCI Gigabit Ethernet card" f_network "tl%d" "Texas Instruments ThunderLAN PCI Ethernet card" f_network "tx%d" "SMC 9432TX Ethernet card" f_network "txp%d" "3Com 3cR990 Ethernet card" f_network "uath%d" "Atheros AR5005UG and AR5005UX USB wireless adapter" f_network "upgt%d" "Conexant/Intersil PrismGT USB wireless adapter" f_network "ural%d" "Ralink Technology RT2500USB 802.11 wireless adapter" f_network "urtw%d" "Realtek 8187L USB wireless adapter" f_network "vge%d" "VIA VT612x PCI Gigabit Ethernet card" f_network "vlan%d" "IEEE 802.1Q VLAN network interface" f_network "vr%d" "VIA VT3043/VT86C100A Rhine PCI Ethernet card" f_network "vx%d" "3COM 3c590 / 3c595 Ethernet card" f_network "wb%d" "Winbond W89C840F PCI Ethernet card" f_network "wi%d" "Lucent WaveLAN/IEEE 802.11 wireless adapter" f_network "wpi%d" "Intel 3945ABG IEEE 802.11 wireless adapter" f_network "wx%d" "Intel Gigabit Ethernet (82452) card" f_network "xe%d" "Xircom/Intel EtherExpress Pro100/16 Ethernet card" f_network "xl%d" "3COM 3c90x / 3c90xB PCI Ethernet card" f_network "zyd%d" "ZyDAS ZD1211/ZD1211B USB 802.11 wireless adapter" DEVICE_CATALOG_APPEND_ONLY= # Additional loading modifies existing devices f_count NCATALOG_DEVICES $DEVICE_CATALOG f_dprintf "%s: Initialized device catalog with %u names/descriptions." \ device.subr $NCATALOG_DEVICES # # Scan for the above devices unless requeted otherwise # f_dprintf "%s: DEVICE_SELF_SCAN_ALL=[%s]" device.subr "$DEVICE_SELF_SCAN_ALL" case "$DEVICE_SELF_SCAN_ALL" in ""|0|[Nn][Oo]|[Oo][Ff][Ff]|[Ff][Aa][Ll][Ss][Ee]) : do nothing ;; *) f_device_get_all esac f_dprintf "%s: Successfully loaded." device.subr fi # ! $_DEVICE_SUBR