From 215c0a5158f17f515f365fc28a9ff0b367be8fc9 Mon Sep 17 00:00:00 2001 From: John Grafton Date: Thu, 11 Apr 2024 12:11:18 -0600 Subject: [PATCH] adduser(8): support creation of ZFS dataset On systems utilizing ZFS, default to creating a ZFS dataset for a new user's home directory if the parent directory resides on a ZFS dataset. Add a flag that disables this behavior if the administrator explicitly does not want it. If run during installation from within a chroot, set mountpoint to legacy after dataset creation and mount directly into the chroot. Then umount and reset the mountpoint to inherit from parent. Also support ZFS default encryption on user's home directory. Feedback by: delphij Reviewed by: imp, kevans Pull Request: https://github.com/freebsd/freebsd-src/pull/881 --- usr.sbin/adduser/adduser.8 | 10 +- usr.sbin/adduser/adduser.conf.5 | 2 + usr.sbin/adduser/adduser.sh | 161 +++++++++++++++++++++++++++++--- 3 files changed, 159 insertions(+), 14 deletions(-) diff --git a/usr.sbin/adduser/adduser.8 b/usr.sbin/adduser/adduser.8 index 4669afc2bfe..ed67e21f943 100644 --- a/usr.sbin/adduser/adduser.8 +++ b/usr.sbin/adduser/adduser.8 @@ -24,7 +24,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd September 15, 2012 +.Dd April 11, 2024 .Dt ADDUSER 8 .Os .Sh NAME @@ -32,7 +32,7 @@ .Nd command for adding new users .Sh SYNOPSIS .Nm -.Op Fl CDENShq +.Op Fl CDENSZhq .Op Fl G Ar groups .Op Fl L Ar login_class .Op Fl M Ar mode @@ -52,6 +52,10 @@ utility is a shell script, implemented around the command, for adding new users. It creates passwd/group entries, a home directory, copies dotfiles and sends the new user a welcome message. +On systems where the parent of home directory is a ZFS dataset, +.Nm +will create the home directory as a ZFS dataset by default, +unless the system administrator specified otherwise. It supports two modes of operation. It may be used interactively at the command line to add one user at a time, or it may be directed @@ -295,6 +299,8 @@ In addition, it will be available for inclusion in the message file in the .Va randompass variable. .El +.It Fl Z +Do not attempt to create ZFS home dataset. .El .Sh FORMAT When the diff --git a/usr.sbin/adduser/adduser.conf.5 b/usr.sbin/adduser/adduser.conf.5 index 2d445a2fabb..09b80f2df02 100644 --- a/usr.sbin/adduser/adduser.conf.5 +++ b/usr.sbin/adduser/adduser.conf.5 @@ -171,6 +171,8 @@ The default information to be held in the GECOS field of .It Va uidstart The default user ID setting. This must be a number above 1000 and fewer than 65534. +.It Va Zflag +Do not attempt to create ZFS home dataset. .El .Sh EXAMPLES The following is an example diff --git a/usr.sbin/adduser/adduser.sh b/usr.sbin/adduser/adduser.sh index fef9e293c1c..0d5a628f8f3 100644 --- a/usr.sbin/adduser/adduser.sh +++ b/usr.sbin/adduser/adduser.sh @@ -84,6 +84,7 @@ show_usage() { echo " -L login class of the user" echo " -M file permission for home directory" echo " -N do not read configuration file" + echo " -Z do not attempt to create ZFS home dataset" echo " -S a nonexistent shell is not an error" echo " -d home directory" echo " -f file from which input will be received" @@ -283,6 +284,22 @@ add_user() { ;; esac + # create ZFS dataset before home directory is created with pw + if [ "${Zcreate}" = "yes" ]; then + if [ "${Zencrypt}" = "yes" ]; then + echo "Enter encryption keyphrase for ZFS dataset (${zhome}):" + fi + if [ -n "$BSDINSTALL_CHROOT" ]; then + create_zfs_chrooted_dataset + else + create_zfs_dataset + if [ "$?" -ne 0 ]; then + err "There was an error adding user ($username)." + return 1 + fi + fi + fi + _pwcmd="$_upasswd ${PWCMD} useradd $_uid $_name $_group $_grouplist $_comment" _pwcmd="$_pwcmd $_shell $_class $_home $_dotdir $_passwdmethod $_passwd" _pwcmd="$_pwcmd $_expire $_pwexpire" @@ -306,6 +323,14 @@ add_user() { fi fi + # give newly created user permissions to their home zfs dataset + if [ "${Zcreate}" = "yes" ]; then + set_zfs_perms + if [ -n "$BSDINSTALL_CHROOT" ]; then + umount_legacy_zfs + fi + fi + _line= _owner= _perms= @@ -479,6 +504,26 @@ get_homeperm() { fi } +# get_zfs_home +# Determine if homeprefix is located on a ZFS filesystem and if +# so, enable ZFS home dataset creation. +# +get_zfs_home() { + # check if zfs kernel module is loaded before attempting to run zfs to + # prevent loading the kernel module on systems that don't use ZFS + if ! "$KLDSTATCMD" -q -m zfs; then + Zcreate="no" + return + fi + zfs_homeprefix=`${ZFSCMD} list -Ho name "${homeprefix}" 2>/dev/null` + if [ "$?" -ne 0 ]; then + Zcreate="no" + elif [ -z "${zfs_homeprefix}" ]; then + Zcreate="no" + fi + zhome="${zfs_homeprefix}/${username}" +} + # get_uid # Reads a numeric userid in an interactive or batch session. Automatically # allocates one if it is not specified. @@ -613,6 +658,81 @@ get_password() { fi } +# get_zfs_encryption +# Ask user if they want to enable encryption on their ZFS home dataset. +# +get_zfs_encryption() { + _input= + _prompt="Enable ZFS encryption? (yes/no) [${Zencrypt}]: " + while : ; do + echo -n "$_prompt" + read _input + + [ -z "$_input" ] && _input=$Zencrypt + case $_input in + [Nn][Oo]|[Nn]) + Zencrypt="no" + break + ;; + [Yy][Ee][Ss]|[Yy][Ee]|[Yy]) + Zencrypt="yes" + break + ;; + *) + # invalid answer; repeat loop + continue + ;; + esac + done + + if [ "${Zencrypt}" = "yes" ]; then + zfsopt="-o encryption=on -o keylocation=prompt -o keyformat=passphrase" + fi +} + +# create_zfs_chrooted_dataset +# Create ZFS dataset owned by the user that was just added within a bsdinstall chroot +# +create_zfs_chrooted_dataset() { + if ! ${ZFSCMD} create -u ${zfsopt} "${zhome}"; then + err "There was an error creating ZFS dataset (${zhome})." + return 1 + fi + ${ZFSCMD} set mountpoint=legacy "${zhome}" + ${MKDIRCMD} -p "${uhome}" + ${MOUNTCMD} -t zfs "${zhome}" "${uhome}" +} + +# umount_legacy_zfs +# Unmount ZFS home directory created as a legacy mount and switch inheritance +# +umount_legacy_zfs() { + ${UMOUNTCMD} "${uhome}" + ${ZFSCMD} inherit mountpoint "${zhome}" +} + +# create_zfs_dataset +# Create ZFS dataset owned by the user that was just added. +# +create_zfs_dataset() { + if ! ${ZFSCMD} create ${zfsopt} "${zhome}"; then + err "There was an error creating ZFS dataset (${zhome})." + return 1 + else + info "Successfully created ZFS dataset (${zhome})." + fi +} + +# set_zfs_perms +# Give new user ownership of newly created zfs dataset. +# +set_zfs_perms() { + if ! ${ZFSCMD} allow "${username}" create,destroy,mount,snapshot "${zhome}"; then + err "There was an error setting permissions on ZFS dataset (${zhome})." + return 1 + fi +} + # input_from_file # Reads a line of account information from standard input and # adds it to the user database. @@ -632,6 +752,7 @@ input_from_file() { get_class get_shell get_homedir + get_zfs_home get_homeperm get_password get_expire_dates @@ -704,6 +825,8 @@ input_interactive() { get_shell get_homedir get_homeperm + get_zfs_home + [ "$Zcreate" = "yes" ] && get_zfs_encryption while : ; do echo -n "Use password-based authentication? [$_usepass]: " @@ -787,12 +910,12 @@ input_interactive() { esac break done - + # Display the information we have so far and prompt to # commit it. # _disable=${disableflag:-"no"} - [ -z "$configflag" ] && printf "%-10s : %s\n" Username $username + [ -z "$configflag" ] && printf "%-11s : %s\n" Username $username case $passwdtype in yes) _pass='*****' @@ -807,16 +930,18 @@ input_interactive() { _pass='' ;; esac - [ -z "$configflag" ] && printf "%-10s : %s\n" "Password" "$_pass" - [ -n "$configflag" ] && printf "%-10s : %s\n" "Pass Type" "$passwdtype" - [ -z "$configflag" ] && printf "%-10s : %s\n" "Full Name" "$ugecos" - [ -z "$configflag" ] && printf "%-10s : %s\n" "Uid" "$uuid" - printf "%-10s : %s\n" "Class" "$uclass" - printf "%-10s : %s %s\n" "Groups" "${ulogingroup:-$username}" "$ugroups" - printf "%-10s : %s\n" "Home" "$uhome" - printf "%-10s : %s\n" "Home Mode" "$uhomeperm" - printf "%-10s : %s\n" "Shell" "$ushell" - printf "%-10s : %s\n" "Locked" "$_disable" + [ -z "$configflag" ] && printf "%-11s : %s\n" "Password" "$_pass" + [ -n "$configflag" ] && printf "%-11s : %s\n" "Pass Type" "$passwdtype" + [ -z "$configflag" ] && printf "%-11s : %s\n" "Full Name" "$ugecos" + [ -z "$configflag" ] && printf "%-11s : %s\n" "Uid" "$uuid" + [ "$Zcreate" = "yes" -a -z "$configflag" ] && printf "%-11s : %s\n" "ZFS dataset" "${zhome}" + [ "$Zencrypt" = "yes" -a -z "$configflag" ] && printf "%-11s : %s\n" "Encrypted" "${Zencrypt}" + printf "%-11s : %s\n" "Class" "$uclass" + printf "%-11s : %s %s\n" "Groups" "${ulogingroup:-$username}" "$ugroups" + printf "%-11s : %s\n" "Home" "$uhome" + printf "%-11s : %s\n" "Home Mode" "$uhomeperm" + printf "%-11s : %s\n" "Shell" "$ushell" + printf "%-11s : %s\n" "Locked" "$_disable" while : ; do echo -n "OK? (yes/no) [$_all_ok]: " read _input @@ -852,6 +977,11 @@ NOLOGIN="nologin" NOLOGIN_PATH="/usr/sbin/nologin" GREPCMD="/usr/bin/grep" DATECMD="/bin/date" +MKDIRCMD="/bin/mkdir" +MOUNTCMD="/sbin/mount" +UMOUNTCMD="/sbin/umount" +ZFSCMD="/sbin/zfs" +KLDSTATCMD="/sbin/kldstat" # Set default values # @@ -880,6 +1010,7 @@ infile= disableflag= Dflag= Sflag= +Zcreate="yes" readconfig="yes" homeprefix="/home" randompass= @@ -890,6 +1021,8 @@ defaultLgroup= defaultgroups= defaultshell="${DEFAULTSHELL}" defaultHomePerm= +zfsopt= +Zencrypt="no" # Make sure the user running this program is root. This isn't a security # measure as much as it is a useful method of reminding the user to @@ -1014,6 +1147,10 @@ for _switch ; do uidstart=$2 shift; shift ;; + -Z) + Zcreate="no" + shift + ;; esac done -- 2.45.0