From 52cdc3b2d935b2f82a955e10fca9d14a8db4af0d Mon Sep 17 00:00:00 2001 From: arybchik Date: Sat, 4 Jun 2016 16:33:54 +0000 Subject: [PATCH] MFC r299909 sfxge(4): regenerate MCDI headers from firmwaresrc .yml Sponsored by: Solarflare Communications, Inc. git-svn-id: svn://svn.freebsd.org/base/stable/10@301369 ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f --- sys/dev/sfxge/common/efx_regs_mcdi.h | 790 ++++++++++++++++++++++++++- 1 file changed, 789 insertions(+), 1 deletion(-) diff --git a/sys/dev/sfxge/common/efx_regs_mcdi.h b/sys/dev/sfxge/common/efx_regs_mcdi.h index a1d76abe4..00a80b466 100644 --- a/sys/dev/sfxge/common/efx_regs_mcdi.h +++ b/sys/dev/sfxge/common/efx_regs_mcdi.h @@ -721,6 +721,12 @@ #define FCDI_EVENT_CODE_PTP_STATUS 0x9 /* enum: Port id config to map MC-FC port idx */ #define FCDI_EVENT_CODE_PORT_CONFIG 0xa +/* enum: Boot result or error code */ +#define FCDI_EVENT_CODE_BOOT_RESULT 0xb +#define FCDI_EVENT_REBOOT_SRC_LBN 36 +#define FCDI_EVENT_REBOOT_SRC_WIDTH 8 +#define FCDI_EVENT_REBOOT_FC_FW 0x0 /* enum */ +#define FCDI_EVENT_REBOOT_FC_BOOTLOADER 0x1 /* enum */ #define FCDI_EVENT_ASSERT_INSTR_ADDRESS_OFST 0 #define FCDI_EVENT_ASSERT_INSTR_ADDRESS_LBN 0 #define FCDI_EVENT_ASSERT_INSTR_ADDRESS_WIDTH 32 @@ -752,6 +758,11 @@ #define FCDI_EVENT_PORT_CONFIG_DATA_OFST 0 #define FCDI_EVENT_PORT_CONFIG_DATA_LBN 0 #define FCDI_EVENT_PORT_CONFIG_DATA_WIDTH 32 +#define FCDI_EVENT_BOOT_RESULT_OFST 0 +/* Enum values, see field(s): */ +/* MC_CMD_AOE/MC_CMD_AOE_OUT_INFO/FC_BOOT_RESULT */ +#define FCDI_EVENT_BOOT_RESULT_LBN 0 +#define FCDI_EVENT_BOOT_RESULT_WIDTH 32 /* FCDI_EXTENDED_EVENT_PPS structuredef: Extended FCDI event to send PPS events * to the MC. Note that this structure | is overlayed over a normal FCDI event @@ -3350,6 +3361,8 @@ #define MC_CMD_AOE_OUT_INFO_FC_BOOT_FAIL_BAD_CHECKSUM 0x4 /* enum: Bad BSP */ #define MC_CMD_AOE_OUT_INFO_FC_BOOT_FAIL_BAD_BSP 0x5 +/* enum: Flash mode is invalid */ +#define MC_CMD_AOE_OUT_INFO_FC_BOOT_FAIL_INVALID_FLASH_MODE 0x6 /* enum: FC application loaded and execution attempted */ #define MC_CMD_AOE_OUT_INFO_FC_BOOT_APP_EXECUTE 0x80 /* enum: FC application Started */ @@ -5480,6 +5493,14 @@ /* MC_CMD_SET_MAC_OUT msgresponse */ #define MC_CMD_SET_MAC_OUT_LEN 0 +/* MC_CMD_SET_MAC_V2_OUT msgresponse */ +#define MC_CMD_SET_MAC_V2_OUT_LEN 4 +/* MTU as configured after processing the request. See comment at + * MC_CMD_SET_MAC_IN/MTU. To query MTU without doing any changes, set CONTROL + * to 0. + */ +#define MC_CMD_SET_MAC_V2_OUT_MTU_OFST 0 + /***********************************/ /* MC_CMD_PHY_STATS @@ -6552,6 +6573,10 @@ #define MC_CMD_SENSOR_PHY1_VCC 0x4d /* enum: Controller die temperature (TDIODE): degC */ #define MC_CMD_SENSOR_CONTROLLER_TDIODE_TEMP 0x4e +/* enum: Board temperature (front): degC */ +#define MC_CMD_SENSOR_BOARD_FRONT_TEMP 0x4f +/* enum: Board temperature (back): degC */ +#define MC_CMD_SENSOR_BOARD_BACK_TEMP 0x50 /* MC_CMD_SENSOR_INFO_ENTRY_TYPEDEF */ #define MC_CMD_SENSOR_ENTRY_OFST 4 #define MC_CMD_SENSOR_ENTRY_LEN 8 @@ -7904,6 +7929,8 @@ #define LICENSED_FEATURES_TX_SNIFF_WIDTH 1 #define LICENSED_FEATURES_PROXY_FILTER_OPS_LBN 8 #define LICENSED_FEATURES_PROXY_FILTER_OPS_WIDTH 1 +#define LICENSED_FEATURES_EVENT_CUT_THROUGH_LBN 9 +#define LICENSED_FEATURES_EVENT_CUT_THROUGH_WIDTH 1 #define LICENSED_FEATURES_MASK_LBN 0 #define LICENSED_FEATURES_MASK_WIDTH 64 @@ -8072,6 +8099,8 @@ #define MC_CMD_INIT_EVQ_IN_FLAG_RX_MERGE_WIDTH 1 #define MC_CMD_INIT_EVQ_IN_FLAG_TX_MERGE_LBN 5 #define MC_CMD_INIT_EVQ_IN_FLAG_TX_MERGE_WIDTH 1 +#define MC_CMD_INIT_EVQ_IN_FLAG_USE_TIMER_LBN 6 +#define MC_CMD_INIT_EVQ_IN_FLAG_USE_TIMER_WIDTH 1 #define MC_CMD_INIT_EVQ_IN_TMR_MODE_OFST 20 /* enum: Disabled */ #define MC_CMD_INIT_EVQ_IN_TMR_MODE_DIS 0x0 @@ -9197,6 +9226,15 @@ * client */ #define MC_CMD_GET_PARSER_DISP_INFO_IN_OP_GET_RESTRICTIONS 0x2 +/* enum: read properties relating to security rules (Medford-only; for use by + * SolarSecure apps, not directly by drivers. See SF-114946-SW.) + */ +#define MC_CMD_GET_PARSER_DISP_INFO_IN_OP_GET_SECURITY_RULE_INFO 0x3 +/* enum: read the list of supported RX filter matches for VXLAN/NVGRE + * encapsulated frames, which follow a different match sequence to normal + * frames (Medford only) + */ +#define MC_CMD_GET_PARSER_DISP_INFO_IN_OP_GET_SUPPORTED_ENCAP_RX_MATCHES 0x4 /* MC_CMD_GET_PARSER_DISP_INFO_OUT msgresponse */ #define MC_CMD_GET_PARSER_DISP_INFO_OUT_LENMIN 8 @@ -9227,6 +9265,39 @@ #define MC_CMD_GET_PARSER_DISP_RESTRICTIONS_OUT_DST_IP_MCAST_ONLY_LBN 0 #define MC_CMD_GET_PARSER_DISP_RESTRICTIONS_OUT_DST_IP_MCAST_ONLY_WIDTH 1 +/* MC_CMD_GET_PARSER_DISP_SECURITY_RULE_INFO_OUT msgresponse: + * GET_PARSER_DISP_INFO response format for OP_GET_SECURITY_RULE_INFO. + * (Medford-only; for use by SolarSecure apps, not directly by drivers. See + * SF-114946-SW.) NOTE - this message definition is provisional. It has not yet + * been used in any released code and may change during development. This note + * will be removed once it is regarded as stable. + */ +#define MC_CMD_GET_PARSER_DISP_SECURITY_RULE_INFO_OUT_LEN 36 +/* identifies the type of operation requested */ +#define MC_CMD_GET_PARSER_DISP_SECURITY_RULE_INFO_OUT_OP_OFST 0 +/* Enum values, see field(s): */ +/* MC_CMD_GET_PARSER_DISP_INFO_IN/OP */ +/* a version number representing the set of rule lookups that are implemented + * by the currently running firmware + */ +#define MC_CMD_GET_PARSER_DISP_SECURITY_RULE_INFO_OUT_RULES_VERSION_OFST 4 +/* enum: implements lookup sequences described in SF-114946-SW draft C */ +#define MC_CMD_GET_PARSER_DISP_SECURITY_RULE_INFO_OUT_RULES_VERSION_SF_114946_SW_C 0x0 +/* the number of nodes in the subnet map */ +#define MC_CMD_GET_PARSER_DISP_SECURITY_RULE_INFO_OUT_SUBNET_MAP_NUM_NODES_OFST 8 +/* the number of entries in one subnet map node */ +#define MC_CMD_GET_PARSER_DISP_SECURITY_RULE_INFO_OUT_SUBNET_MAP_NUM_ENTRIES_PER_NODE_OFST 12 +/* minimum valid value for a subnet ID in a subnet map leaf */ +#define MC_CMD_GET_PARSER_DISP_SECURITY_RULE_INFO_OUT_SUBNET_ID_MIN_OFST 16 +/* maximum valid value for a subnet ID in a subnet map leaf */ +#define MC_CMD_GET_PARSER_DISP_SECURITY_RULE_INFO_OUT_SUBNET_ID_MAX_OFST 20 +/* the number of entries in the local and remote port range maps */ +#define MC_CMD_GET_PARSER_DISP_SECURITY_RULE_INFO_OUT_PORTRANGE_TREE_NUM_ENTRIES_OFST 24 +/* minimum valid value for a portrange ID in a port range map leaf */ +#define MC_CMD_GET_PARSER_DISP_SECURITY_RULE_INFO_OUT_PORTRANGE_ID_MIN_OFST 28 +/* maximum valid value for a portrange ID in a port range map leaf */ +#define MC_CMD_GET_PARSER_DISP_SECURITY_RULE_INFO_OUT_PORTRANGE_ID_MAX_OFST 32 + /***********************************/ /* MC_CMD_PARSER_DISP_RW @@ -10084,6 +10155,8 @@ #define MC_CMD_GET_CAPABILITIES_OUT_TXDP_TEST_FW_TSO_EDIT 0x101 /* enum: TXDP Test firmware image 2 */ #define MC_CMD_GET_CAPABILITIES_OUT_TXDP_TEST_FW_PACKET_EDITS 0x102 +/* enum: TXDP CSR bus test firmware */ +#define MC_CMD_GET_CAPABILITIES_OUT_TXDP_TEST_FW_CSR 0x103 #define MC_CMD_GET_CAPABILITIES_OUT_RXPD_FW_VERSION_OFST 8 #define MC_CMD_GET_CAPABILITIES_OUT_RXPD_FW_VERSION_LEN 2 #define MC_CMD_GET_CAPABILITIES_OUT_RXPD_FW_VERSION_REV_LBN 0 @@ -10162,7 +10235,7 @@ #define MC_CMD_GET_CAPABILITIES_V2_IN_LEN 0 /* MC_CMD_GET_CAPABILITIES_V2_OUT msgresponse */ -#define MC_CMD_GET_CAPABILITIES_V2_OUT_LEN 26 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_LEN 72 /* First word of flags. */ #define MC_CMD_GET_CAPABILITIES_V2_OUT_FLAGS1_OFST 0 #define MC_CMD_GET_CAPABILITIES_V2_OUT_VPORT_RECONFIGURE_LBN 3 @@ -10267,6 +10340,8 @@ #define MC_CMD_GET_CAPABILITIES_V2_OUT_TXDP_TEST_FW_TSO_EDIT 0x101 /* enum: TXDP Test firmware image 2 */ #define MC_CMD_GET_CAPABILITIES_V2_OUT_TXDP_TEST_FW_PACKET_EDITS 0x102 +/* enum: TXDP CSR bus test firmware */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_TXDP_TEST_FW_CSR 0x103 #define MC_CMD_GET_CAPABILITIES_V2_OUT_RXPD_FW_VERSION_OFST 8 #define MC_CMD_GET_CAPABILITIES_V2_OUT_RXPD_FW_VERSION_LEN 2 #define MC_CMD_GET_CAPABILITIES_V2_OUT_RXPD_FW_VERSION_REV_LBN 0 @@ -10346,11 +10421,67 @@ #define MC_CMD_GET_CAPABILITIES_V2_OUT_TX_TSO_V2_WIDTH 1 #define MC_CMD_GET_CAPABILITIES_V2_OUT_TX_TSO_V2_ENCAP_LBN 1 #define MC_CMD_GET_CAPABILITIES_V2_OUT_TX_TSO_V2_ENCAP_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_EVQ_TIMER_CTRL_LBN 2 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_EVQ_TIMER_CTRL_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_EVENT_CUT_THROUGH_LBN 3 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_EVENT_CUT_THROUGH_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_RX_CUT_THROUGH_LBN 4 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_RX_CUT_THROUGH_WIDTH 1 /* Number of FATSOv2 contexts per datapath supported by this NIC. Not present * on older firmware (check the length). */ #define MC_CMD_GET_CAPABILITIES_V2_OUT_TX_TSO_V2_N_CONTEXTS_OFST 24 #define MC_CMD_GET_CAPABILITIES_V2_OUT_TX_TSO_V2_N_CONTEXTS_LEN 2 +/* One byte per PF containing the number of the external port assigned to this + * PF, indexed by PF number. Special values indicate that a PF is either not + * present or not assigned. + */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_PFS_TO_PORTS_ASSIGNMENT_OFST 26 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_PFS_TO_PORTS_ASSIGNMENT_LEN 1 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_PFS_TO_PORTS_ASSIGNMENT_NUM 16 +/* enum: The caller is not permitted to access information on this PF. */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_ACCESS_NOT_PERMITTED 0xff +/* enum: PF does not exist. */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_PF_NOT_PRESENT 0xfe +/* enum: PF does exist but is not assigned to any external port. */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_PF_NOT_ASSIGNED 0xfd +/* enum: This value indicates that PF is assigned, but it cannot be expressed + * in this field. It is intended for a possible future situation where a more + * complex scheme of PFs to ports mapping is being used. The future driver + * should look for a new field supporting the new scheme. The current/old + * driver should treat this value as PF_NOT_ASSIGNED. + */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_INCOMPATIBLE_ASSIGNMENT 0xfc +/* One byte per PF containing the number of its VFs, indexed by PF number. A + * special value indicates that a PF is not present. + */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_NUM_VFS_PER_PF_OFST 42 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_NUM_VFS_PER_PF_LEN 1 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_NUM_VFS_PER_PF_NUM 16 +/* enum: The caller is not permitted to access information on this PF. */ +/* MC_CMD_GET_CAPABILITIES_V2_OUT_ACCESS_NOT_PERMITTED 0xff */ +/* enum: PF does not exist. */ +/* MC_CMD_GET_CAPABILITIES_V2_OUT_PF_NOT_PRESENT 0xfe */ +/* Number of VIs available for each external port */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_NUM_VIS_PER_PORT_OFST 58 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_NUM_VIS_PER_PORT_LEN 2 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_NUM_VIS_PER_PORT_NUM 4 +/* Size of RX descriptor cache expressed as binary logarithm The actual size + * equals (2 ^ RX_DESC_CACHE_SIZE) + */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_RX_DESC_CACHE_SIZE_OFST 66 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_RX_DESC_CACHE_SIZE_LEN 1 +/* Size of TX descriptor cache expressed as binary logarithm The actual size + * equals (2 ^ TX_DESC_CACHE_SIZE) + */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_TX_DESC_CACHE_SIZE_OFST 67 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_TX_DESC_CACHE_SIZE_LEN 1 +/* Total number of available PIO buffers */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_NUM_PIO_BUFFS_OFST 68 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_NUM_PIO_BUFFS_LEN 2 +/* Size of a single PIO buffer */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_SIZE_PIO_BUFF_OFST 70 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_SIZE_PIO_BUFF_LEN 2 /***********************************/ @@ -13762,4 +13893,661 @@ /* MC_CMD_PREPARE_SIGNED_OUT msgresponse */ #define MC_CMD_PREPARE_SIGNED_OUT_LEN 0 + +/***********************************/ +/* MC_CMD_SET_SECURITY_RULE + * Set blacklist and/or whitelist action for a particular match criteria. + * (Medford-only; for use by SolarSecure apps, not directly by drivers. See + * SF-114946-SW.) NOTE - this message definition is provisional. It has not yet + * been used in any released code and may change during development. This note + * will be removed once it is regarded as stable. + */ +#define MC_CMD_SET_SECURITY_RULE 0x10f +#undef MC_CMD_0x10f_PRIVILEGE_CTG + +#define MC_CMD_0x10f_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_SET_SECURITY_RULE_IN msgrequest */ +#define MC_CMD_SET_SECURITY_RULE_IN_LEN 92 +/* fields to include in match criteria */ +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_FIELDS_OFST 0 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_REMOTE_IP_LBN 0 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_REMOTE_IP_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_LOCAL_IP_LBN 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_LOCAL_IP_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_REMOTE_MAC_LBN 2 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_REMOTE_MAC_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_REMOTE_PORT_LBN 3 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_REMOTE_PORT_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_LOCAL_MAC_LBN 4 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_LOCAL_MAC_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_LOCAL_PORT_LBN 5 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_LOCAL_PORT_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_ETHER_TYPE_LBN 6 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_ETHER_TYPE_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_INNER_VLAN_LBN 7 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_INNER_VLAN_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_OUTER_VLAN_LBN 8 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_OUTER_VLAN_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_IP_PROTO_LBN 9 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_IP_PROTO_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_PHYSICAL_PORT_LBN 10 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_PHYSICAL_PORT_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_RESERVED_LBN 11 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_RESERVED_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_REMOTE_SUBNET_ID_LBN 12 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_REMOTE_SUBNET_ID_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_REMOTE_PORTRANGE_ID_LBN 13 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_REMOTE_PORTRANGE_ID_WIDTH 1 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_LOCAL_PORTRANGE_ID_LBN 14 +#define MC_CMD_SET_SECURITY_RULE_IN_MATCH_LOCAL_PORTRANGE_ID_WIDTH 1 +/* remote MAC address to match (as bytes in network order) */ +#define MC_CMD_SET_SECURITY_RULE_IN_REMOTE_MAC_OFST 4 +#define MC_CMD_SET_SECURITY_RULE_IN_REMOTE_MAC_LEN 6 +/* remote port to match (as bytes in network order) */ +#define MC_CMD_SET_SECURITY_RULE_IN_REMOTE_PORT_OFST 10 +#define MC_CMD_SET_SECURITY_RULE_IN_REMOTE_PORT_LEN 2 +/* local MAC address to match (as bytes in network order) */ +#define MC_CMD_SET_SECURITY_RULE_IN_LOCAL_MAC_OFST 12 +#define MC_CMD_SET_SECURITY_RULE_IN_LOCAL_MAC_LEN 6 +/* local port to match (as bytes in network order) */ +#define MC_CMD_SET_SECURITY_RULE_IN_LOCAL_PORT_OFST 18 +#define MC_CMD_SET_SECURITY_RULE_IN_LOCAL_PORT_LEN 2 +/* Ethernet type to match (as bytes in network order) */ +#define MC_CMD_SET_SECURITY_RULE_IN_ETHER_TYPE_OFST 20 +#define MC_CMD_SET_SECURITY_RULE_IN_ETHER_TYPE_LEN 2 +/* Inner VLAN tag to match (as bytes in network order) */ +#define MC_CMD_SET_SECURITY_RULE_IN_INNER_VLAN_OFST 22 +#define MC_CMD_SET_SECURITY_RULE_IN_INNER_VLAN_LEN 2 +/* Outer VLAN tag to match (as bytes in network order) */ +#define MC_CMD_SET_SECURITY_RULE_IN_OUTER_VLAN_OFST 24 +#define MC_CMD_SET_SECURITY_RULE_IN_OUTER_VLAN_LEN 2 +/* IP protocol to match (in low byte; set high byte to 0) */ +#define MC_CMD_SET_SECURITY_RULE_IN_IP_PROTO_OFST 26 +#define MC_CMD_SET_SECURITY_RULE_IN_IP_PROTO_LEN 2 +/* Physical port to match (as little-endian 32-bit value) */ +#define MC_CMD_SET_SECURITY_RULE_IN_PHYSICAL_PORT_OFST 28 +/* Reserved; set to 0 */ +#define MC_CMD_SET_SECURITY_RULE_IN_RESERVED_OFST 32 +/* remote IP address to match (as bytes in network order; set last 12 bytes to + * 0 for IPv4 address) + */ +#define MC_CMD_SET_SECURITY_RULE_IN_REMOTE_IP_OFST 36 +#define MC_CMD_SET_SECURITY_RULE_IN_REMOTE_IP_LEN 16 +/* local IP address to match (as bytes in network order; set last 12 bytes to 0 + * for IPv4 address) + */ +#define MC_CMD_SET_SECURITY_RULE_IN_LOCAL_IP_OFST 52 +#define MC_CMD_SET_SECURITY_RULE_IN_LOCAL_IP_LEN 16 +/* remote subnet ID to match (as little-endian 32-bit value); note that remote + * subnets are matched by mapping the remote IP address to a "subnet ID" via a + * data structure which must already have been configured using + * MC_CMD_SUBNET_MAP_SET_NODE appropriately + */ +#define MC_CMD_SET_SECURITY_RULE_IN_REMOTE_SUBNET_ID_OFST 68 +/* remote portrange ID to match (as little-endian 32-bit value); note that + * remote port ranges are matched by mapping the remote port to a "portrange + * ID" via a data structure which must already have been configured using + * MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE + */ +#define MC_CMD_SET_SECURITY_RULE_IN_REMOTE_PORTRANGE_ID_OFST 72 +/* local portrange ID to match (as little-endian 32-bit value); note that local + * port ranges are matched by mapping the local port to a "portrange ID" via a + * data structure which must already have been configured using + * MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE + */ +#define MC_CMD_SET_SECURITY_RULE_IN_LOCAL_PORTRANGE_ID_OFST 76 +/* set the action for transmitted packets matching this rule */ +#define MC_CMD_SET_SECURITY_RULE_IN_TX_ACTION_OFST 80 +/* enum: make no decision */ +#define MC_CMD_SET_SECURITY_RULE_IN_TX_ACTION_NONE 0x0 +/* enum: decide to accept the packet */ +#define MC_CMD_SET_SECURITY_RULE_IN_TX_ACTION_WHITELIST 0x1 +/* enum: decide to drop the packet */ +#define MC_CMD_SET_SECURITY_RULE_IN_TX_ACTION_BLACKLIST 0x2 +/* enum: do not change the current TX action */ +#define MC_CMD_SET_SECURITY_RULE_IN_TX_ACTION_UNCHANGED 0xffffffff +/* set the action for received packets matching this rule */ +#define MC_CMD_SET_SECURITY_RULE_IN_RX_ACTION_OFST 84 +/* enum: make no decision */ +#define MC_CMD_SET_SECURITY_RULE_IN_RX_ACTION_NONE 0x0 +/* enum: decide to accept the packet */ +#define MC_CMD_SET_SECURITY_RULE_IN_RX_ACTION_WHITELIST 0x1 +/* enum: decide to drop the packet */ +#define MC_CMD_SET_SECURITY_RULE_IN_RX_ACTION_BLACKLIST 0x2 +/* enum: do not change the current RX action */ +#define MC_CMD_SET_SECURITY_RULE_IN_RX_ACTION_UNCHANGED 0xffffffff +/* counter ID to associate with this rule; IDs are allocated using + * MC_CMD_SECURITY_RULE_COUNTER_ALLOC + */ +#define MC_CMD_SET_SECURITY_RULE_IN_COUNTER_ID_OFST 88 +/* enum: special value for the null counter ID */ +#define MC_CMD_SET_SECURITY_RULE_IN_COUNTER_ID_NONE 0x0 + +/* MC_CMD_SET_SECURITY_RULE_OUT msgresponse */ +#define MC_CMD_SET_SECURITY_RULE_OUT_LEN 28 +/* new reference count for uses of counter ID */ +#define MC_CMD_SET_SECURITY_RULE_OUT_COUNTER_REFCNT_OFST 0 +/* constructed match bits for this rule (as a tracing aid only) */ +#define MC_CMD_SET_SECURITY_RULE_OUT_LUE_MATCH_BITS_OFST 4 +#define MC_CMD_SET_SECURITY_RULE_OUT_LUE_MATCH_BITS_LEN 12 +/* constructed discriminator bits for this rule (as a tracing aid only) */ +#define MC_CMD_SET_SECURITY_RULE_OUT_LUE_DISCRIMINATOR_OFST 16 +/* base location for probes for this rule (as a tracing aid only) */ +#define MC_CMD_SET_SECURITY_RULE_OUT_LUE_PROBE_BASE_OFST 20 +/* step for probes for this rule (as a tracing aid only) */ +#define MC_CMD_SET_SECURITY_RULE_OUT_LUE_PROBE_STEP_OFST 24 + + +/***********************************/ +/* MC_CMD_RESET_SECURITY_RULES + * Reset all blacklist and whitelist actions for a particular physical port, or + * all ports. (Medford-only; for use by SolarSecure apps, not directly by + * drivers. See SF-114946-SW.) NOTE - this message definition is provisional. + * It has not yet been used in any released code and may change during + * development. This note will be removed once it is regarded as stable. + */ +#define MC_CMD_RESET_SECURITY_RULES 0x110 +#undef MC_CMD_0x110_PRIVILEGE_CTG + +#define MC_CMD_0x110_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_RESET_SECURITY_RULES_IN msgrequest */ +#define MC_CMD_RESET_SECURITY_RULES_IN_LEN 4 +/* index of physical port to reset (or ALL_PHYSICAL_PORTS to reset all) */ +#define MC_CMD_RESET_SECURITY_RULES_IN_PHYSICAL_PORT_OFST 0 +/* enum: special value to reset all physical ports */ +#define MC_CMD_RESET_SECURITY_RULES_IN_ALL_PHYSICAL_PORTS 0xffffffff + +/* MC_CMD_RESET_SECURITY_RULES_OUT msgresponse */ +#define MC_CMD_RESET_SECURITY_RULES_OUT_LEN 0 + + +/***********************************/ +/* MC_CMD_GET_SECURITY_RULESET_VERSION + * Return a large hash value representing a "version" of the complete set of + * currently active blacklist / whitelist rules and associated data structures. + * (Medford-only; for use by SolarSecure apps, not directly by drivers. See + * SF-114946-SW.) NOTE - this message definition is provisional. It has not yet + * been used in any released code and may change during development. This note + * will be removed once it is regarded as stable. + */ +#define MC_CMD_GET_SECURITY_RULESET_VERSION 0x111 +#undef MC_CMD_0x111_PRIVILEGE_CTG + +#define MC_CMD_0x111_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_GET_SECURITY_RULESET_VERSION_IN msgrequest */ +#define MC_CMD_GET_SECURITY_RULESET_VERSION_IN_LEN 0 + +/* MC_CMD_GET_SECURITY_RULESET_VERSION_OUT msgresponse */ +#define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_LENMIN 1 +#define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_LENMAX 252 +#define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_LEN(num) (0+1*(num)) +/* Opaque hash value; length may vary depending on the hash scheme used */ +#define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_OFST 0 +#define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_LEN 1 +#define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_MINNUM 1 +#define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_MAXNUM 252 + + +/***********************************/ +/* MC_CMD_SECURITY_RULE_COUNTER_ALLOC + * Allocate counters for use with blacklist / whitelist rules. (Medford-only; + * for use by SolarSecure apps, not directly by drivers. See SF-114946-SW.) + * NOTE - this message definition is provisional. It has not yet been used in + * any released code and may change during development. This note will be + * removed once it is regarded as stable. + */ +#define MC_CMD_SECURITY_RULE_COUNTER_ALLOC 0x112 +#undef MC_CMD_0x112_PRIVILEGE_CTG + +#define MC_CMD_0x112_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_SECURITY_RULE_COUNTER_ALLOC_IN msgrequest */ +#define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_IN_LEN 4 +/* the number of new counter IDs to request */ +#define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_IN_NUM_COUNTERS_OFST 0 + +/* MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT msgresponse */ +#define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_LENMIN 4 +#define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_LENMAX 252 +#define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_LEN(num) (4+4*(num)) +/* the number of new counter IDs allocated (may be less than the number + * requested if resources are unavailable) + */ +#define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_NUM_COUNTERS_OFST 0 +/* new counter ID(s) */ +#define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_COUNTER_ID_OFST 4 +#define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_COUNTER_ID_LEN 4 +#define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_COUNTER_ID_MINNUM 0 +#define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_COUNTER_ID_MAXNUM 62 + + +/***********************************/ +/* MC_CMD_SECURITY_RULE_COUNTER_FREE + * Allocate counters for use with blacklist / whitelist rules. (Medford-only; + * for use by SolarSecure apps, not directly by drivers. See SF-114946-SW.) + * NOTE - this message definition is provisional. It has not yet been used in + * any released code and may change during development. This note will be + * removed once it is regarded as stable. + */ +#define MC_CMD_SECURITY_RULE_COUNTER_FREE 0x113 +#undef MC_CMD_0x113_PRIVILEGE_CTG + +#define MC_CMD_0x113_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_SECURITY_RULE_COUNTER_FREE_IN msgrequest */ +#define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_LENMIN 4 +#define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_LENMAX 252 +#define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_LEN(num) (4+4*(num)) +/* the number of counter IDs to free */ +#define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_NUM_COUNTERS_OFST 0 +/* the counter ID(s) to free */ +#define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_COUNTER_ID_OFST 4 +#define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_COUNTER_ID_LEN 4 +#define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_COUNTER_ID_MINNUM 0 +#define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_COUNTER_ID_MAXNUM 62 + +/* MC_CMD_SECURITY_RULE_COUNTER_FREE_OUT msgresponse */ +#define MC_CMD_SECURITY_RULE_COUNTER_FREE_OUT_LEN 0 + + +/***********************************/ +/* MC_CMD_SUBNET_MAP_SET_NODE + * Atomically update a trie node in the map of subnets to subnet IDs. The + * constants in the descriptions of the fields of this message may be retrieved + * by the GET_SECURITY_RULE_INFO op of MC_CMD_GET_PARSER_DISP_INFO. (Medford- + * only; for use by SolarSecure apps, not directly by drivers. See + * SF-114946-SW.) NOTE - this message definition is provisional. It has not yet + * been used in any released code and may change during development. This note + * will be removed once it is regarded as stable. + */ +#define MC_CMD_SUBNET_MAP_SET_NODE 0x114 +#undef MC_CMD_0x114_PRIVILEGE_CTG + +#define MC_CMD_0x114_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_SUBNET_MAP_SET_NODE_IN msgrequest */ +#define MC_CMD_SUBNET_MAP_SET_NODE_IN_LENMIN 6 +#define MC_CMD_SUBNET_MAP_SET_NODE_IN_LENMAX 252 +#define MC_CMD_SUBNET_MAP_SET_NODE_IN_LEN(num) (4+2*(num)) +/* node to update in the range 0 .. SUBNET_MAP_NUM_NODES-1 */ +#define MC_CMD_SUBNET_MAP_SET_NODE_IN_NODE_ID_OFST 0 +/* SUBNET_MAP_NUM_ENTRIES_PER_NODE new entries; each entry is either a pointer + * to the next node, expressed as an offset in the trie memory (i.e. node ID + * multiplied by SUBNET_MAP_NUM_ENTRIES_PER_NODE), or a leaf value in the range + * SUBNET_ID_MIN .. SUBNET_ID_MAX + */ +#define MC_CMD_SUBNET_MAP_SET_NODE_IN_ENTRY_OFST 4 +#define MC_CMD_SUBNET_MAP_SET_NODE_IN_ENTRY_LEN 2 +#define MC_CMD_SUBNET_MAP_SET_NODE_IN_ENTRY_MINNUM 1 +#define MC_CMD_SUBNET_MAP_SET_NODE_IN_ENTRY_MAXNUM 124 + +/* MC_CMD_SUBNET_MAP_SET_NODE_OUT msgresponse */ +#define MC_CMD_SUBNET_MAP_SET_NODE_OUT_LEN 0 + +/* PORTRANGE_TREE_ENTRY structuredef */ +#define PORTRANGE_TREE_ENTRY_LEN 4 +/* key for branch nodes (<= key takes left branch, > key takes right branch), + * or magic value for leaf nodes + */ +#define PORTRANGE_TREE_ENTRY_BRANCH_KEY_OFST 0 +#define PORTRANGE_TREE_ENTRY_BRANCH_KEY_LEN 2 +#define PORTRANGE_TREE_ENTRY_LEAF_NODE_KEY 0xffff /* enum */ +#define PORTRANGE_TREE_ENTRY_BRANCH_KEY_LBN 0 +#define PORTRANGE_TREE_ENTRY_BRANCH_KEY_WIDTH 16 +/* final portrange ID for leaf nodes (don't care for branch nodes) */ +#define PORTRANGE_TREE_ENTRY_LEAF_PORTRANGE_ID_OFST 2 +#define PORTRANGE_TREE_ENTRY_LEAF_PORTRANGE_ID_LEN 2 +#define PORTRANGE_TREE_ENTRY_LEAF_PORTRANGE_ID_LBN 16 +#define PORTRANGE_TREE_ENTRY_LEAF_PORTRANGE_ID_WIDTH 16 + + +/***********************************/ +/* MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE + * Atomically update the entire tree mapping remote port ranges to portrange + * IDs. The constants in the descriptions of the fields of this message may be + * retrieved by the GET_SECURITY_RULE_INFO op of MC_CMD_GET_PARSER_DISP_INFO. + * (Medford-only; for use by SolarSecure apps, not directly by drivers. See + * SF-114946-SW.) NOTE - this message definition is provisional. It has not yet + * been used in any released code and may change during development. This note + * will be removed once it is regarded as stable. + */ +#define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE 0x115 +#undef MC_CMD_0x115_PRIVILEGE_CTG + +#define MC_CMD_0x115_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN msgrequest */ +#define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_LENMIN 4 +#define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_LENMAX 252 +#define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_LEN(num) (0+4*(num)) +/* PORTRANGE_TREE_NUM_ENTRIES new entries, each laid out as a + * PORTRANGE_TREE_ENTRY + */ +#define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_OFST 0 +#define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_LEN 4 +#define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MINNUM 1 +#define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MAXNUM 63 + +/* MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_OUT msgresponse */ +#define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_OUT_LEN 0 + + +/***********************************/ +/* MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE + * Atomically update the entire tree mapping remote port ranges to portrange + * IDs. The constants in the descriptions of the fields of this message may be + * retrieved by the GET_SECURITY_RULE_INFO op of MC_CMD_GET_PARSER_DISP_INFO. + * (Medford-only; for use by SolarSecure apps, not directly by drivers. See + * SF-114946-SW.) NOTE - this message definition is provisional. It has not yet + * been used in any released code and may change during development. This note + * will be removed once it is regarded as stable. + */ +#define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE 0x116 +#undef MC_CMD_0x116_PRIVILEGE_CTG + +#define MC_CMD_0x116_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN msgrequest */ +#define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_LENMIN 4 +#define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_LENMAX 252 +#define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_LEN(num) (0+4*(num)) +/* PORTRANGE_TREE_NUM_ENTRIES new entries, each laid out as a + * PORTRANGE_TREE_ENTRY + */ +#define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_OFST 0 +#define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_LEN 4 +#define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MINNUM 1 +#define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MAXNUM 63 + +/* MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_OUT msgresponse */ +#define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_OUT_LEN 0 + +/* TUNNEL_ENCAP_UDP_PORT_ENTRY structuredef */ +#define TUNNEL_ENCAP_UDP_PORT_ENTRY_LEN 4 +/* UDP port (the standard ports are named below but any port may be used) */ +#define TUNNEL_ENCAP_UDP_PORT_ENTRY_UDP_PORT_OFST 0 +#define TUNNEL_ENCAP_UDP_PORT_ENTRY_UDP_PORT_LEN 2 +/* enum: the IANA allocated UDP port for VXLAN */ +#define TUNNEL_ENCAP_UDP_PORT_ENTRY_IANA_VXLAN_UDP_PORT 0x12b5 +/* enum: the IANA allocated UDP port for Geneve */ +#define TUNNEL_ENCAP_UDP_PORT_ENTRY_IANA_GENEVE_UDP_PORT 0x17c1 +#define TUNNEL_ENCAP_UDP_PORT_ENTRY_UDP_PORT_LBN 0 +#define TUNNEL_ENCAP_UDP_PORT_ENTRY_UDP_PORT_WIDTH 16 +/* tunnel encapsulation protocol (only those named below are supported) */ +#define TUNNEL_ENCAP_UDP_PORT_ENTRY_PROTOCOL_OFST 2 +#define TUNNEL_ENCAP_UDP_PORT_ENTRY_PROTOCOL_LEN 2 +/* enum: This port will be used for VXLAN on both IPv4 and IPv6 */ +#define TUNNEL_ENCAP_UDP_PORT_ENTRY_VXLAN 0x0 +/* enum: This port will be used for Geneve on both IPv4 and IPv6 */ +#define TUNNEL_ENCAP_UDP_PORT_ENTRY_GENEVE 0x1 +#define TUNNEL_ENCAP_UDP_PORT_ENTRY_PROTOCOL_LBN 16 +#define TUNNEL_ENCAP_UDP_PORT_ENTRY_PROTOCOL_WIDTH 16 + + +/***********************************/ +/* MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS + * Configure UDP ports for tunnel encapsulation hardware acceleration. The + * parser-dispatcher will attempt to parse traffic on these ports as tunnel + * encapsulation PDUs and filter them using the tunnel encapsulation filter + * chain rather than the standard filter chain. Note that this command can + * cause all functions to see a reset. (Available on Medford only.) + */ +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS 0x117 +#undef MC_CMD_0x117_PRIVILEGE_CTG + +#define MC_CMD_0x117_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN msgrequest */ +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_LENMIN 4 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_LENMAX 68 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_LEN(num) (4+4*(num)) +/* Flags */ +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_FLAGS_OFST 0 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_FLAGS_LEN 2 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_UNLOADING_LBN 0 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_UNLOADING_WIDTH 1 +/* The number of entries in the ENTRIES array */ +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_NUM_ENTRIES_OFST 2 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_NUM_ENTRIES_LEN 2 +/* Entries defining the UDP port to protocol mapping, each laid out as a + * TUNNEL_ENCAP_UDP_PORT_ENTRY + */ +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_ENTRIES_OFST 4 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_ENTRIES_LEN 4 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_ENTRIES_MINNUM 0 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_ENTRIES_MAXNUM 16 + +/* MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_OUT msgresponse */ +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_OUT_LEN 2 +/* Flags */ +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_OUT_FLAGS_OFST 0 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_OUT_FLAGS_LEN 2 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_OUT_RESETTING_LBN 0 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_OUT_RESETTING_WIDTH 1 + + +/***********************************/ +/* MC_CMD_RX_BALANCING + * Configure a port upconverter to distribute the packets on both RX engines. + * Packets are distributed based on a table with the destination vFIFO. The + * index of the table is a hash of source and destination of IPV4 and VLAN + * priority. + */ +#define MC_CMD_RX_BALANCING 0x118 +#undef MC_CMD_0x118_PRIVILEGE_CTG + +#define MC_CMD_0x118_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_RX_BALANCING_IN msgrequest */ +#define MC_CMD_RX_BALANCING_IN_LEN 4 +/* The RX port whose upconverter table will be modified */ +#define MC_CMD_RX_BALANCING_IN_PORT_OFST 0 +#define MC_CMD_RX_BALANCING_IN_PORT_LEN 1 +/* The VLAN priority associated to the table index and vFIFO */ +#define MC_CMD_RX_BALANCING_IN_PRIORITY_OFST 1 +#define MC_CMD_RX_BALANCING_IN_PRIORITY_LEN 1 +/* The resulting bit of SRC^DST for indexing the table */ +#define MC_CMD_RX_BALANCING_IN_SRC_DST_OFST 2 +#define MC_CMD_RX_BALANCING_IN_SRC_DST_LEN 1 +/* The RX engine to which the vFIFO in the table entry will point to */ +#define MC_CMD_RX_BALANCING_IN_ENG_OFST 3 +#define MC_CMD_RX_BALANCING_IN_ENG_LEN 1 + +/* MC_CMD_RX_BALANCING_OUT msgresponse */ +#define MC_CMD_RX_BALANCING_OUT_LEN 0 + + +/***********************************/ +/* MC_CMD_TSA_BIND + * TSAN - TSAC binding communication protocol. Refer to SF-115479-TC for more + * info in respect to the binding protocol. Note- This MCDI command is only + * available over a TLS secure connection between the TSAN and TSAC, and is not + * available to host software. + */ +#define MC_CMD_TSA_BIND 0x119 + +/* MC_CMD_TSA_BIND_IN msgrequest: Protocol operation code */ +#define MC_CMD_TSA_BIND_IN_LEN 4 +#define MC_CMD_TSA_BIND_IN_OP_OFST 0 +/* enum: Retrieve the TSAN ID from a TSAN. TSAN ID is a unique identifier for + * the network adapter. More specifically, TSAN ID equals the MAC address of + * the network adapter. TSAN ID is used as part of the TSAN authentication + * protocol. Refer to SF-114946-SW for more information. + */ +#define MC_CMD_TSA_BIND_OP_GET_ID 0x1 +/* enum: Get a binding ticket from the TSAN. The binding ticket is used as part + * of the binding procedure to authorize the binding of an adapter to a TSAID. + * Refer to SF-114946-SW for more information. + */ +#define MC_CMD_TSA_BIND_OP_GET_TICKET 0x2 +/* enum: Opcode associated with the propagation of a private key that TSAN uses + * as part of post-binding authentication procedure. More specifically, TSAN + * uses this key for a signing operation. TSAC uses the counterpart public key + * to verify the signature. Note - The post-binding authentication occurs when + * the TSAN-TSAC connection terminates and TSAN tries to reconnect. Refer to + * SF-114946-SW for more information. + */ +#define MC_CMD_TSA_BIND_OP_SET_KEY 0x3 +/* enum: Request an unbinding operation. Note- TSAN clears the binding ticket + * from the Nvram section. + */ +#define MC_CMD_TSA_BIND_OP_UNBIND 0x4 + +/* MC_CMD_TSA_BIND_IN_GET_ID msgrequest */ +#define MC_CMD_TSA_BIND_IN_GET_ID_LEN 20 +/* The operation requested. */ +#define MC_CMD_TSA_BIND_IN_GET_ID_OP_OFST 0 +/* Cryptographic nonce that TSAC generates and sends to TSAN. TSAC generates + * the nonce every time as part of the TSAN post-binding authentication + * procedure when the TSAN-TSAC connection terminates and TSAN does need to re- + * connect to the TSAC. Refer to SF-114946-SW for more information. + */ +#define MC_CMD_TSA_BIND_IN_GET_ID_NONCE_OFST 4 +#define MC_CMD_TSA_BIND_IN_GET_ID_NONCE_LEN 16 + +/* MC_CMD_TSA_BIND_IN_GET_TICKET msgrequest */ +#define MC_CMD_TSA_BIND_IN_GET_TICKET_LEN 4 +/* The operation requested. */ +#define MC_CMD_TSA_BIND_IN_GET_TICKET_OP_OFST 0 + +/* MC_CMD_TSA_BIND_IN_SET_KEY msgrequest */ +#define MC_CMD_TSA_BIND_IN_SET_KEY_LENMIN 5 +#define MC_CMD_TSA_BIND_IN_SET_KEY_LENMAX 252 +#define MC_CMD_TSA_BIND_IN_SET_KEY_LEN(num) (4+1*(num)) +/* The operation requested. */ +#define MC_CMD_TSA_BIND_IN_SET_KEY_OP_OFST 0 +/* This data blob contains the private key generated by the TSAC. TSAN uses + * this key for a signing operation. Note- This private key is used in + * conjunction with the post-binding TSAN authentication procedure that occurs + * when the TSAN-TSAC connection terminates and TSAN tries to reconnect. Refer + * to SF-114946-SW for more information. + */ +#define MC_CMD_TSA_BIND_IN_SET_KEY_DATKEY_OFST 4 +#define MC_CMD_TSA_BIND_IN_SET_KEY_DATKEY_LEN 1 +#define MC_CMD_TSA_BIND_IN_SET_KEY_DATKEY_MINNUM 1 +#define MC_CMD_TSA_BIND_IN_SET_KEY_DATKEY_MAXNUM 248 + +/* MC_CMD_TSA_BIND_IN_UNBIND msgrequest: Asks for the un-binding procedure */ +#define MC_CMD_TSA_BIND_IN_UNBIND_LEN 6 +/* TSAN unique identifier for the network adapter */ +#define MC_CMD_TSA_BIND_IN_UNBIND_TSANID_OFST 0 +#define MC_CMD_TSA_BIND_IN_UNBIND_TSANID_LEN 6 + +/* MC_CMD_TSA_BIND_OUT_GET_ID msgresponse */ +#define MC_CMD_TSA_BIND_OUT_GET_ID_LENMIN 11 +#define MC_CMD_TSA_BIND_OUT_GET_ID_LENMAX 252 +#define MC_CMD_TSA_BIND_OUT_GET_ID_LEN(num) (10+1*(num)) +/* The operation completion code. */ +#define MC_CMD_TSA_BIND_OUT_GET_ID_OP_OFST 0 +/* TSAN unique identifier for the network adapter */ +#define MC_CMD_TSA_BIND_OUT_GET_ID_TSANID_OFST 4 +#define MC_CMD_TSA_BIND_OUT_GET_ID_TSANID_LEN 6 +/* The signature data blob. The signature is computed against the message + * formed by TSAN ID concatenated with the NONCE value. Refer to SF-115479-TC + * for more information also in respect to the private keys that are used to + * sign the message based on TSAN pre/post-binding authentication procedure. + */ +#define MC_CMD_TSA_BIND_OUT_GET_ID_SIG_OFST 10 +#define MC_CMD_TSA_BIND_OUT_GET_ID_SIG_LEN 1 +#define MC_CMD_TSA_BIND_OUT_GET_ID_SIG_MINNUM 1 +#define MC_CMD_TSA_BIND_OUT_GET_ID_SIG_MAXNUM 242 + +/* MC_CMD_TSA_BIND_OUT_GET_TICKET msgresponse */ +#define MC_CMD_TSA_BIND_OUT_GET_TICKET_LENMIN 5 +#define MC_CMD_TSA_BIND_OUT_GET_TICKET_LENMAX 252 +#define MC_CMD_TSA_BIND_OUT_GET_TICKET_LEN(num) (4+1*(num)) +/* The operation completion code. */ +#define MC_CMD_TSA_BIND_OUT_GET_TICKET_OP_OFST 0 +/* The ticket represents the data blob construct that TSAN sends to TSAC as + * part of the binding protocol. From the TSAN perspective the ticket is an + * opaque construct. For more info refer to SF-115479-TC. + */ +#define MC_CMD_TSA_BIND_OUT_GET_TICKET_TICKET_OFST 4 +#define MC_CMD_TSA_BIND_OUT_GET_TICKET_TICKET_LEN 1 +#define MC_CMD_TSA_BIND_OUT_GET_TICKET_TICKET_MINNUM 1 +#define MC_CMD_TSA_BIND_OUT_GET_TICKET_TICKET_MAXNUM 248 + +/* MC_CMD_TSA_BIND_OUT_SET_KEY msgresponse */ +#define MC_CMD_TSA_BIND_OUT_SET_KEY_LEN 4 +/* The operation completion code. */ +#define MC_CMD_TSA_BIND_OUT_SET_KEY_OP_OFST 0 + +/* MC_CMD_TSA_BIND_OUT_UNBIND msgresponse */ +#define MC_CMD_TSA_BIND_OUT_UNBIND_LEN 8 +/* Same as MC_CMD_ERR field, but included as 0 in success cases */ +#define MC_CMD_TSA_BIND_OUT_UNBIND_RESULT_OFST 0 +/* Extra status information */ +#define MC_CMD_TSA_BIND_OUT_UNBIND_INFO_OFST 4 +/* enum: Unbind successful. */ +#define MC_CMD_TSA_BIND_OUT_UNBIND_OK_UNBOUND 0x0 +/* enum: TSANID mismatch */ +#define MC_CMD_TSA_BIND_OUT_UNBIND_ERR_BAD_TSANID 0x1 +/* enum: Unable to remove the binding ticket from persistent storage. */ +#define MC_CMD_TSA_BIND_OUT_UNBIND_ERR_REMOVE_TICKET 0x2 +/* enum: TSAN is not bound to a binding ticket. */ +#define MC_CMD_TSA_BIND_OUT_UNBIND_ERR_NOT_BOUND 0x3 + + +/***********************************/ +/* MC_CMD_MANAGE_SECURITY_RULESET_CACHE + * Manage the persistent NVRAM cache of security rules created with + * MC_CMD_SET_SECURITY_RULE. Note that the cache is not automatically updated + * as rules are added or removed; the active ruleset must be explicitly + * committed to the cache. The cache may also be explicitly invalidated, + * without affecting the currently active ruleset. When the cache is valid, it + * will be loaded at power on or MC reboot, instead of the default ruleset. + * Rollback of the currently active ruleset to the cached version (when it is + * valid) is also supported. (Medford-only; for use by SolarSecure apps, not + * directly by drivers. See SF-114946-SW.) NOTE - this message definition is + * provisional. It has not yet been used in any released code and may change + * during development. This note will be removed once it is regarded as stable. + */ +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE 0x11a +#undef MC_CMD_0x11a_PRIVILEGE_CTG + +#define MC_CMD_0x11a_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_MANAGE_SECURITY_RULESET_CACHE_IN msgrequest */ +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_IN_LEN 4 +/* the operation to perform */ +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_IN_OP_OFST 0 +/* enum: reports the ruleset version that is cached in persistent storage but + * performs no other action + */ +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_IN_OP_GET_CACHED_VERSION 0x0 +/* enum: rolls back the active state to the cached version. (May fail with + * ENOENT if there is no valid cached version.) + */ +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_IN_OP_ROLLBACK 0x1 +/* enum: commits the active state to the persistent cache */ +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_IN_OP_COMMIT 0x2 +/* enum: invalidates the persistent cache without affecting the active state */ +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_IN_OP_INVALIDATE 0x3 + +/* MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT msgresponse */ +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_LENMIN 5 +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_LENMAX 252 +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_LEN(num) (4+1*(num)) +/* indicates whether the persistent cache is valid (after completion of the + * requested operation in the case of rollback, commit, or invalidate) + */ +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_STATE_OFST 0 +/* enum: persistent cache is invalid (the VERSION field will be empty in this + * case) + */ +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_STATE_INVALID 0x0 +/* enum: persistent cache is valid */ +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_STATE_VALID 0x1 +/* cached ruleset version (after completion of the requested operation, in the + * case of rollback, commit, or invalidate) as an opaque hash value in the same + * form as MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION + */ +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_VERSION_OFST 4 +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_VERSION_LEN 1 +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_VERSION_MINNUM 1 +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_VERSION_MAXNUM 248 + #endif /* _SIENA_MC_DRIVER_PCOL_H */ -- 2.45.0