From 5575d563a5ec45853ff355b9f100c008111562a9 Mon Sep 17 00:00:00 2001 From: ian Date: Sun, 24 Jan 2016 22:06:56 +0000 Subject: [PATCH] MFC r294032: Fix the handling of the "PDC write transfer length" erratum for at91. The problem affects revision 1xx hardware as well as later versions. Also, the recommended workaround is to set the PDC count register for a 12-byte transfer when the actual size is less than that, but there is no need to extend or zero-out the data buffer, because the blklen register contains the real transfer size and only that many bytes will be transferred. Also add a sysctl to turn debugging printfs on or off on the fly. git-svn-id: svn://svn.freebsd.org/base/stable/10@294687 ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f --- sys/arm/at91/at91_mci.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/sys/arm/at91/at91_mci.c b/sys/arm/at91/at91_mci.c index 5d5822802..a506715a0 100644 --- a/sys/arm/at91/at91_mci.c +++ b/sys/arm/at91/at91_mci.c @@ -446,6 +446,9 @@ at91_mci_attach(device_t dev) CTLFLAG_RW, &sc->allow_overclock, 0, "Allow up to 30MHz clock for 25MHz request when next highest speed 15MHz or less."); + SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "debug", + CTLFLAG_RWTUN, &mci_debug, 0, "enable debug output"); + /* * Our real min freq is master_clock/512, but upper driver layers are * going to set the min speed during card discovery, and the right speed @@ -783,15 +786,6 @@ at91_mci_start_cmd(struct at91_mci_softc *sc, struct mmc_command *cmd) WR4(sc, PDC_PTCR, PDC_PTCR_RXTEN); } else { len = min(BBSIZE, remaining); - /* - * If this is MCI1 revision 2xx controller, apply - * a work-around for the "Data Write Operation and - * number of bytes" erratum. - */ - if ((sc->sc_cap & CAP_MCI1_REV2XX) && len < 12) { - len = 12; - memset(sc->bbuf_vaddr[0], 0, 12); - } at91_bswap_buf(sc, sc->bbuf_vaddr[0], data->data, len); err = bus_dmamap_load(sc->dmatag, sc->bbuf_map[0], sc->bbuf_vaddr[0], len, at91_mci_getaddr, @@ -800,8 +794,13 @@ at91_mci_start_cmd(struct at91_mci_softc *sc, struct mmc_command *cmd) panic("IO write dmamap_load failed\n"); bus_dmamap_sync(sc->dmatag, sc->bbuf_map[0], BUS_DMASYNC_PREWRITE); + /* + * Erratum workaround: PDC transfer length on a write + * must not be smaller than 12 bytes (3 words); only + * blklen bytes (set above) are actually transferred. + */ WR4(sc, PDC_TPR,paddr); - WR4(sc, PDC_TCR, len / 4); + WR4(sc, PDC_TCR, (len < 12) ? 3 : len / 4); sc->bbuf_len[0] = len; remaining -= len; if (remaining == 0) { @@ -818,7 +817,7 @@ at91_mci_start_cmd(struct at91_mci_softc *sc, struct mmc_command *cmd) bus_dmamap_sync(sc->dmatag, sc->bbuf_map[1], BUS_DMASYNC_PREWRITE); WR4(sc, PDC_TNPR, paddr); - WR4(sc, PDC_TNCR, len / 4); + WR4(sc, PDC_TNCR, (len < 12) ? 3 : len / 4); sc->bbuf_len[1] = len; remaining -= len; } -- 2.45.0