/*- * Copyright (c) 2011 * Ben Gray . * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * Texas Instruments TWL4030/TWL5030/TWL60x0/TPS659x0 Power Management. * * This driver covers the voltages regulators (LDO), allows for enabling & * disabling the voltage output and adjusting the voltage level. * * Voltage regulators can belong to different power groups, in this driver we * put the regulators under our control in the "Application power group". * * * FLATTENED DEVICE TREE (FDT) * Startup override settings can be specified in the FDT, if they are they * should be under the twl parent device and take the following form: * * voltage-regulators = "name1", "millivolts1", * "name2", "millivolts2"; * * Each override should be a pair, the first entry is the name of the regulator * the second is the voltage (in millivolts) to set for the given regulator. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "twl.h" #include "twl_vreg.h" static int twl_vreg_debug = 1; /* * Power Groups bits for the 4030 and 6030 devices */ #define TWL4030_P3_GRP 0x80 /* Peripherals, power group */ #define TWL4030_P2_GRP 0x40 /* Modem power group */ #define TWL4030_P1_GRP 0x20 /* Application power group (FreeBSD control) */ #define TWL6030_P3_GRP 0x04 /* Modem power group */ #define TWL6030_P2_GRP 0x02 /* Connectivity power group */ #define TWL6030_P1_GRP 0x01 /* Application power group (FreeBSD control) */ /* * Register offsets within a LDO regulator register set */ #define TWL_VREG_GRP 0x00 /* Regulator GRP register */ #define TWL_VREG_STATE 0x02 #define TWL_VREG_VSEL 0x03 /* Voltage select register */ #define UNDF 0xFFFF static const uint16_t twl6030_voltages[] = { 0000, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300, UNDF, UNDF, UNDF, UNDF, UNDF, UNDF, 2750 }; static const uint16_t twl4030_vaux1_voltages[] = { 1500, 1800, 2500, 2800, 3000, 3000, 3000, 3000 }; static const uint16_t twl4030_vaux2_voltages[] = { 1700, 1700, 1900, 1300, 1500, 1800, 2000, 2500, 2100, 2800, 2200, 2300, 2400, 2400, 2400, 2400 }; static const uint16_t twl4030_vaux3_voltages[] = { 1500, 1800, 2500, 2800, 3000, 3000, 3000, 3000 }; static const uint16_t twl4030_vaux4_voltages[] = { 700, 1000, 1200, 1300, 1500, 1800, 1850, 2500, 2600, 2800, 2850, 3000, 3150, 3150, 3150, 3150 }; static const uint16_t twl4030_vmmc1_voltages[] = { 1850, 2850, 3000, 3150 }; static const uint16_t twl4030_vmmc2_voltages[] = { 1000, 1000, 1200, 1300, 1500, 1800, 1850, 2500, 2600, 2800, 2850, 3000, 3150, 3150, 3150, 3150 }; static const uint16_t twl4030_vpll1_voltages[] = { 1000, 1200, 1300, 1800, 2800, 3000, 3000, 3000 }; static const uint16_t twl4030_vpll2_voltages[] = { 700, 1000, 1200, 1300, 1500, 1800, 1850, 2500, 2600, 2800, 2850, 3000, 3150, 3150, 3150, 3150 }; static const uint16_t twl4030_vsim_voltages[] = { 1000, 1200, 1300, 1800, 2800, 3000, 3000, 3000 }; static const uint16_t twl4030_vdac_voltages[] = { 1200, 1300, 1800, 1800 }; static const uint16_t twl4030_vdd1_voltages[] = { 800, 1450 }; static const uint16_t twl4030_vdd2_voltages[] = { 800, 1450, 1500 }; static const uint16_t twl4030_vio_voltages[] = { 1800, 1850 }; static const uint16_t twl4030_vintana2_voltages[] = { 2500, 2750 }; /** * Support voltage regulators for the different IC's */ struct twl_regulator { const char *name; uint8_t subdev; uint8_t regbase; uint16_t fixedvoltage; const uint16_t *voltages; uint32_t num_voltages; }; #define TWL_REGULATOR_ADJUSTABLE(name, subdev, reg, voltages) \ { name, subdev, reg, 0, voltages, (sizeof(voltages)/sizeof(voltages[0])) } #define TWL_REGULATOR_FIXED(name, subdev, reg, voltage) \ { name, subdev, reg, voltage, NULL, 0 } static const struct twl_regulator twl4030_regulators[] = { TWL_REGULATOR_ADJUSTABLE("vaux1", 0, 0x17, twl4030_vaux1_voltages), TWL_REGULATOR_ADJUSTABLE("vaux2", 0, 0x1B, twl4030_vaux2_voltages), TWL_REGULATOR_ADJUSTABLE("vaux3", 0, 0x1F, twl4030_vaux3_voltages), TWL_REGULATOR_ADJUSTABLE("vaux4", 0, 0x23, twl4030_vaux4_voltages), TWL_REGULATOR_ADJUSTABLE("vmmc1", 0, 0x27, twl4030_vmmc1_voltages), TWL_REGULATOR_ADJUSTABLE("vmmc2", 0, 0x2B, twl4030_vmmc2_voltages), TWL_REGULATOR_ADJUSTABLE("vpll1", 0, 0x2F, twl4030_vpll1_voltages), TWL_REGULATOR_ADJUSTABLE("vpll2", 0, 0x33, twl4030_vpll2_voltages), TWL_REGULATOR_ADJUSTABLE("vsim", 0, 0x37, twl4030_vsim_voltages), TWL_REGULATOR_ADJUSTABLE("vdac", 0, 0x3B, twl4030_vdac_voltages), TWL_REGULATOR_ADJUSTABLE("vintana2", 0, 0x43, twl4030_vintana2_voltages), TWL_REGULATOR_FIXED("vintana1", 0, 0x3F, 1500), TWL_REGULATOR_FIXED("vintdig", 0, 0x47, 1500), TWL_REGULATOR_FIXED("vusb1v5", 0, 0x71, 1500), TWL_REGULATOR_FIXED("vusb1v8", 0, 0x74, 1800), TWL_REGULATOR_FIXED("vusb3v1", 0, 0x77, 3100), { NULL, 0, 0x00, 0, NULL, 0 } }; static const struct twl_regulator twl6030_regulators[] = { TWL_REGULATOR_ADJUSTABLE("vaux1", 0, 0x84, twl6030_voltages), TWL_REGULATOR_ADJUSTABLE("vaux2", 0, 0x89, twl6030_voltages), TWL_REGULATOR_ADJUSTABLE("vaux3", 0, 0x8C, twl6030_voltages), TWL_REGULATOR_ADJUSTABLE("vmmc", 0, 0x98, twl6030_voltages), TWL_REGULATOR_ADJUSTABLE("vpp", 0, 0x9C, twl6030_voltages), TWL_REGULATOR_ADJUSTABLE("vusim", 0, 0xA4, twl6030_voltages), TWL_REGULATOR_FIXED("vmem", 0, 0x64, 1800), TWL_REGULATOR_FIXED("vusb", 0, 0xA0, 3300), TWL_REGULATOR_FIXED("v1v8", 0, 0x46, 1800), TWL_REGULATOR_FIXED("v2v1", 0, 0x4C, 2100), TWL_REGULATOR_FIXED("v1v29", 0, 0x40, 1290), TWL_REGULATOR_FIXED("vcxio", 0, 0x90, 1800), TWL_REGULATOR_FIXED("vdac", 0, 0x94, 1800), TWL_REGULATOR_FIXED("vana", 0, 0x80, 2100), { NULL, 0, 0x00, 0, NULL, 0 } }; #define TWL_VREG_MAX_NAMELEN 32 struct twl_regulator_entry { LIST_ENTRY(twl_regulator_entry) entries; char name[TWL_VREG_MAX_NAMELEN]; struct sysctl_oid *oid; uint8_t sub_dev; /* TWL sub-device group */ uint8_t reg_off; /* base register offset for the LDO */ uint16_t fixed_voltage; /* the (milli)voltage if LDO is fixed */ const uint16_t *supp_voltages; /* pointer to an array of possible voltages */ uint32_t num_supp_voltages; /* the number of supplied voltages */ }; struct twl_vreg_softc { device_t sc_dev; device_t sc_pdev; struct sx sc_sx; struct intr_config_hook sc_init_hook; LIST_HEAD(twl_regulator_list, twl_regulator_entry) sc_vreg_list; }; #define TWL_VREG_XLOCK(_sc) sx_xlock(&(_sc)->sc_sx) #define TWL_VREG_XUNLOCK(_sc) sx_xunlock(&(_sc)->sc_sx) #define TWL_VREG_SLOCK(_sc) sx_slock(&(_sc)->sc_sx) #define TWL_VREG_SUNLOCK(_sc) sx_sunlock(&(_sc)->sc_sx) #define TWL_VREG_LOCK_INIT(_sc) sx_init(&(_sc)->sc_sx, "twl_vreg") #define TWL_VREG_LOCK_DESTROY(_sc) sx_destroy(&(_sc)->sc_sx); #define TWL_VREG_ASSERT_LOCKED(_sc) sx_assert(&(_sc)->sc_sx, SA_LOCKED); #define TWL_VREG_LOCK_UPGRADE(_sc) \ do { \ while (!sx_try_upgrade(&(_sc)->sc_sx)) \ pause("twl_vreg_ex", (hz / 100)); \ } while(0) #define TWL_VREG_LOCK_DOWNGRADE(_sc) sx_downgrade(&(_sc)->sc_sx); /** * twl_vreg_read_1 - read single register from the TWL device * twl_vreg_write_1 - write a single register in the TWL device * @sc: device context * @clk: the clock device we're reading from / writing to * @off: offset within the clock's register set * @val: the value to write or a pointer to a variable to store the result * * RETURNS: * Zero on success or an error code on failure. */ static inline int twl_vreg_read_1(struct twl_vreg_softc *sc, struct twl_regulator_entry *regulator, uint8_t off, uint8_t *val) { return (twl_read(sc->sc_pdev, regulator->sub_dev, regulator->reg_off + off, val, 1)); } static inline int twl_vreg_write_1(struct twl_vreg_softc *sc, struct twl_regulator_entry *regulator, uint8_t off, uint8_t val) { return (twl_write(sc->sc_pdev, regulator->sub_dev, regulator->reg_off + off, &val, 1)); } /** * twl_millivolt_to_vsel - gets the vsel bit value to write into the register * for a desired voltage and regulator * @sc: the device soft context * @regulator: pointer to the regulator device * @millivolts: the millivolts to find the bit value for * @vsel: upon return will contain the corresponding register value * * Accepts a (milli)voltage value and tries to find the closest match to the * actual supported voltages for the given regulator. If a match is found * within 100mv of the target, @vsel is written with the match and 0 is * returned. If no voltage match is found the function returns an non-zero * value. * * RETURNS: * Zero on success or an error code on failure. */ static int twl_vreg_millivolt_to_vsel(struct twl_vreg_softc *sc, struct twl_regulator_entry *regulator, int millivolts, uint8_t *vsel) { int delta, smallest_delta; unsigned i, closest_idx; TWL_VREG_ASSERT_LOCKED(sc); if (regulator->supp_voltages == NULL) return (EINVAL); /* Loop over the support voltages and try and find the closest match */ closest_idx = 0; smallest_delta = 0x7fffffff; for (i = 0; i < regulator->num_supp_voltages; i++) { /* Ignore undefined values */ if (regulator->supp_voltages[i] == UNDF) continue; /* Calculate the difference */ delta = millivolts - (int)regulator->supp_voltages[i]; if (abs(delta) < smallest_delta) { smallest_delta = abs(delta); closest_idx = i; } } /* Check we got a voltage that was within 100mv of the actual target, this * is just a value I picked out of thin air. */ if ((smallest_delta > 100) && (closest_idx < 0x100)) return (EINVAL); *vsel = closest_idx; return (0); } /** * twl_vreg_is_regulator_enabled - returns the enabled status of the regulator * @sc: the device soft context * @regulator: pointer to the regulator device * @enabled: stores the enabled status, zero disabled, non-zero enabled * * LOCKING: * On entry expects the TWL VREG lock to be held. Will upgrade the lock to * exclusive if not already but, if so, it will be downgraded again before * returning. * * RETURNS: * Zero on success or an error code on failure. */ static int twl_vreg_is_regulator_enabled(struct twl_vreg_softc *sc, struct twl_regulator_entry *regulator, int *enabled) { int err; uint8_t grp; uint8_t state; int xlocked; if (enabled == NULL) return (EINVAL); TWL_VREG_ASSERT_LOCKED(sc); xlocked = sx_xlocked(&sc->sc_sx); if (!xlocked) TWL_VREG_LOCK_UPGRADE(sc); /* The status reading is different for the different devices */ if (twl_is_4030(sc->sc_pdev)) { err = twl_vreg_read_1(sc, regulator, TWL_VREG_GRP, &state); if (err) goto done; *enabled = (state & TWL4030_P1_GRP); } else if (twl_is_6030(sc->sc_pdev) || twl_is_6025(sc->sc_pdev)) { /* Check the regulator is in the application group */ if (twl_is_6030(sc->sc_pdev)) { err = twl_vreg_read_1(sc, regulator, TWL_VREG_GRP, &grp); if (err) goto done; if (!(grp & TWL6030_P1_GRP)) { *enabled = 0; /* disabled */ goto done; } } /* Read the application mode state and verify it's ON */ err = twl_vreg_read_1(sc, regulator, TWL_VREG_STATE, &state); if (err) goto done; *enabled = ((state & 0x0C) == 0x04); } else { err = EINVAL; } done: if (!xlocked) TWL_VREG_LOCK_DOWNGRADE(sc); return (err); } /** * twl_vreg_disable_regulator - disables a voltage regulator * @sc: the device soft context * @regulator: pointer to the regulator device * * Disables the regulator which will stop the output drivers. * * LOCKING: * On entry expects the TWL VREG lock to be held. Will upgrade the lock to * exclusive if not already but, if so, it will be downgraded again before * returning. * * RETURNS: * Zero on success or a positive error code on failure. */ static int twl_vreg_disable_regulator(struct twl_vreg_softc *sc, struct twl_regulator_entry *regulator) { int err = 0; uint8_t grp; int xlocked; TWL_VREG_ASSERT_LOCKED(sc); xlocked = sx_xlocked(&sc->sc_sx); if (!xlocked) TWL_VREG_LOCK_UPGRADE(sc); if (twl_is_4030(sc->sc_pdev)) { /* Read the regulator CFG_GRP register */ err = twl_vreg_read_1(sc, regulator, TWL_VREG_GRP, &grp); if (err) goto done; /* On the TWL4030 we just need to remove the regulator from all the * power groups. */ grp &= ~(TWL4030_P1_GRP | TWL4030_P2_GRP | TWL4030_P3_GRP); err = twl_vreg_write_1(sc, regulator, TWL_VREG_GRP, grp); } else if (twl_is_6030(sc->sc_pdev) || twl_is_6025(sc->sc_pdev)) { /* On TWL6030 we need to make sure we disable power for all groups */ if (twl_is_6030(sc->sc_pdev)) grp = TWL6030_P1_GRP | TWL6030_P2_GRP | TWL6030_P3_GRP; else grp = 0x00; /* Write the resource state to "OFF" */ err = twl_vreg_write_1(sc, regulator, TWL_VREG_STATE, (grp << 5)); } done: if (!xlocked) TWL_VREG_LOCK_DOWNGRADE(sc); return (err); } /** * twl_vreg_enable_regulator - enables the voltage regulator * @sc: the device soft context * @regulator: pointer to the regulator device * * Enables the regulator which will enable the voltage out at the currently * set voltage. Set the voltage before calling this function to avoid * driving the voltage too high/low by mistake. * * LOCKING: * On entry expects the TWL VREG lock to be held. Will upgrade the lock to * exclusive if not already but, if so, it will be downgraded again before * returning. * * RETURNS: * Zero on success or a positive error code on failure. */ static int twl_vreg_enable_regulator(struct twl_vreg_softc *sc, struct twl_regulator_entry *regulator) { int err; uint8_t grp; int xlocked; TWL_VREG_ASSERT_LOCKED(sc); xlocked = sx_xlocked(&sc->sc_sx); if (!xlocked) TWL_VREG_LOCK_UPGRADE(sc); err = twl_vreg_read_1(sc, regulator, TWL_VREG_GRP, &grp); if (err) goto done; /* Enable the regulator by ensuring it's in the application power group * and is in the "on" state. */ if (twl_is_4030(sc->sc_pdev)) { /* On the TWL4030 we just need to ensure the regulator is in the right * power domain, don't need to turn on explicitly like TWL6030. */ grp |= TWL4030_P1_GRP; err = twl_vreg_write_1(sc, regulator, TWL_VREG_GRP, grp); } else if (twl_is_6030(sc->sc_pdev) || twl_is_6025(sc->sc_pdev)) { if (twl_is_6030(sc->sc_pdev) && !(grp & TWL6030_P1_GRP)) { grp |= TWL6030_P1_GRP; err = twl_vreg_write_1(sc, regulator, TWL_VREG_GRP, grp); if (err) goto done; } /* Write the resource state to "ON" */ err = twl_vreg_write_1(sc, regulator, TWL_VREG_STATE, (grp << 5) | 0x01); } done: if (!xlocked) TWL_VREG_LOCK_DOWNGRADE(sc); return (err); } /** * twl_vreg_write_regulator_voltage - sets the voltage level on a regulator * @sc: the device soft context * @regulator: pointer to the regulator structure * @millivolts: the voltage to set * * Sets the voltage output on a given regulator, if the regulator is not * enabled, it will be enabled. * * LOCKING: * On entry expects the TWL VREG lock to be held, may upgrade the lock to * exclusive but if so it will be downgraded once again before returning. * * RETURNS: * Zero on success or an error code on failure. */ static int twl_vreg_write_regulator_voltage(struct twl_vreg_softc *sc, struct twl_regulator_entry *regulator, int millivolts) { int err; uint8_t vsel; int xlocked; TWL_VREG_ASSERT_LOCKED(sc); /* If millivolts is zero then we simply disable the output */ if (millivolts == 0) return (twl_vreg_disable_regulator(sc, regulator)); /* If the regulator has a fixed voltage then check the setting matches * and simply enable. */ if (regulator->supp_voltages == NULL || regulator->num_supp_voltages == 0) { if (millivolts != regulator->fixed_voltage) return (EINVAL); return (twl_vreg_enable_regulator(sc, regulator)); } /* Get the VSEL value for the given voltage */ err = twl_vreg_millivolt_to_vsel(sc, regulator, millivolts, &vsel); if (err) return (err); /* Need to upgrade because writing the voltage and enabling should be atomic */ xlocked = sx_xlocked(&sc->sc_sx); if (!xlocked) TWL_VREG_LOCK_UPGRADE(sc); /* Set voltage and enable (atomically) */ err = twl_vreg_write_1(sc, regulator, TWL_VREG_VSEL, (vsel & 0x1f)); if (!err) { err = twl_vreg_enable_regulator(sc, regulator); } if (!xlocked) TWL_VREG_LOCK_DOWNGRADE(sc); if ((twl_vreg_debug > 1) && !err) device_printf(sc->sc_dev, "%s : setting voltage to %dmV (vsel: 0x%x)\n", regulator->name, millivolts, vsel); return (err); } /** * twl_vreg_read_regulator_voltage - reads the voltage on a given regulator * @sc: the device soft context * @regulator: pointer to the regulator structure * @millivolts: upon return will contain the voltage on the regulator * * LOCKING: * On entry expects the TWL VREG lock to be held. It will upgrade the lock to * exclusive if not already, but if so, it will be downgraded again before * returning. * * RETURNS: * Zero on success, or otherwise an error code. */ static int twl_vreg_read_regulator_voltage(struct twl_vreg_softc *sc, struct twl_regulator_entry *regulator, int *millivolts) { int err; int en = 0; int xlocked; uint8_t vsel; TWL_VREG_ASSERT_LOCKED(sc); /* Need to upgrade the lock because checking enabled state and voltage * should be atomic. */ xlocked = sx_xlocked(&sc->sc_sx); if (!xlocked) TWL_VREG_LOCK_UPGRADE(sc); /* Check if the regulator is currently enabled */ err = twl_vreg_is_regulator_enabled(sc, regulator, &en); if (err) goto done; *millivolts = 0; if (!en) goto done; /* Not all voltages are adjustable */ if (regulator->supp_voltages == NULL || !regulator->num_supp_voltages) { *millivolts = regulator->fixed_voltage; goto done; } /* For variable voltages read the voltage register */ err = twl_vreg_read_1(sc, regulator, TWL_VREG_VSEL, &vsel); if (err) goto done; vsel &= (regulator->num_supp_voltages - 1); if (regulator->supp_voltages[vsel] == UNDF) { err = EINVAL; goto done; } *millivolts = regulator->supp_voltages[vsel]; done: if (!xlocked) TWL_VREG_LOCK_DOWNGRADE(sc); if ((twl_vreg_debug > 1) && !err) device_printf(sc->sc_dev, "%s : reading voltage is %dmV (vsel: 0x%x)\n", regulator->name, *millivolts, vsel); return (err); } /** * twl_vreg_get_voltage - public interface to read the voltage on a regulator * @dev: TWL VREG device * @name: the name of the regulator to read the voltage of * @millivolts: pointer to an integer that upon return will contain the mV * * If the regulator is disabled the function will set the @millivolts to zero. * * LOCKING: * Internally the function takes and releases the TWL VREG lock. * * RETURNS: * Zero on success or a negative error code on failure. */ int twl_vreg_get_voltage(device_t dev, const char *name, int *millivolts) { struct twl_vreg_softc *sc; struct twl_regulator_entry *regulator; int err = EINVAL; if (millivolts == NULL) return (EINVAL); sc = device_get_softc(dev); TWL_VREG_SLOCK(sc); LIST_FOREACH(regulator, &sc->sc_vreg_list, entries) { if (strcmp(regulator->name, name) == 0) { err = twl_vreg_read_regulator_voltage(sc, regulator, millivolts); break; } } TWL_VREG_SUNLOCK(sc); return (err); } /** * twl_vreg_set_voltage - public interface to write the voltage on a regulator * @dev: TWL VREG device * @name: the name of the regulator to read the voltage of * @millivolts: the voltage to set in millivolts * * Sets the output voltage on a given regulator. If the regulator is a fixed * voltage reg then the @millivolts value should match the fixed voltage. If * a variable regulator then the @millivolt value must fit within the max/min * range of the given regulator. * * LOCKING: * Internally the function takes and releases the TWL VREG lock. * * RETURNS: * Zero on success or a negative error code on failure. */ int twl_vreg_set_voltage(device_t dev, const char *name, int millivolts) { struct twl_vreg_softc *sc; struct twl_regulator_entry *regulator; int err = EINVAL; sc = device_get_softc(dev); TWL_VREG_SLOCK(sc); LIST_FOREACH(regulator, &sc->sc_vreg_list, entries) { if (strcmp(regulator->name, name) == 0) { err = twl_vreg_write_regulator_voltage(sc, regulator, millivolts); break; } } TWL_VREG_SUNLOCK(sc); return (err); } /** * twl_sysctl_voltage - reads or writes the voltage for a regulator * @SYSCTL_HANDLER_ARGS: arguments for the callback * * Callback for the sysctl entry for the regulator, simply used to return * the voltage on a particular regulator. * * LOCKING: * Takes the TWL_VREG shared lock internally. * * RETURNS: * Zero on success or an error code on failure. */ static int twl_vreg_sysctl_voltage(SYSCTL_HANDLER_ARGS) { struct twl_vreg_softc *sc = (struct twl_vreg_softc*)arg1; struct twl_regulator_entry *regulator; int voltage; int found = 0; TWL_VREG_SLOCK(sc); /* Find the regulator with the matching name */ LIST_FOREACH(regulator, &sc->sc_vreg_list, entries) { if (strcmp(regulator->name, oidp->oid_name) == 0) { found = 1; break; } } /* Sanity check that we found the regulator */ if (!found) { TWL_VREG_SUNLOCK(sc); return (EINVAL); } twl_vreg_read_regulator_voltage(sc, regulator, &voltage); TWL_VREG_SUNLOCK(sc); return sysctl_handle_int(oidp, &voltage, 0, req); } /** * twl_add_regulator - adds single voltage regulator sysctls for the device * @sc: device soft context * @name: the name of the regulator * @nsub: the number of the subdevice * @regbase: the base address of the voltage regulator registers * @fixed_voltage: if a fixed voltage regulator this defines it's voltage * @voltages: if a variable voltage regulator, an array of possible voltages * @num_voltages: the number of entries @voltages * * Adds a voltage regulator to the device and also a sysctl interface for the * regulator. * * LOCKING: * The TWL_VEG exclusive lock must be held while this function is called. * * RETURNS: * Pointer to the new regulator entry on success, otherwise on failure NULL. */ static struct twl_regulator_entry* twl_vreg_add_regulator(struct twl_vreg_softc *sc, const char *name, uint8_t nsub, uint8_t regbase, uint16_t fixed_voltage, const uint16_t *voltages, uint32_t num_voltages) { struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); struct twl_regulator_entry *new; new = malloc(sizeof(struct twl_regulator_entry), M_DEVBUF, M_NOWAIT | M_ZERO); if (new == NULL) return (NULL); strncpy(new->name, name, TWL_VREG_MAX_NAMELEN); new->name[TWL_VREG_MAX_NAMELEN - 1] = '\0'; new->sub_dev = nsub; new->reg_off = regbase; new->fixed_voltage = fixed_voltage; new->supp_voltages = voltages; new->num_supp_voltages = num_voltages; /* Add a sysctl entry for the voltage */ new->oid = SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, name, CTLTYPE_INT | CTLFLAG_RD, sc, 0, twl_vreg_sysctl_voltage, "I", "voltage regulator"); /* Finally add the regulator to list of supported regulators */ LIST_INSERT_HEAD(&sc->sc_vreg_list, new, entries); return (new); } /** * twl_vreg_add_regulators - adds any voltage regulators to the device * @sc: device soft context * @chip: the name of the chip used in the hints * @regulators: the list of possible voltage regulators * * Loops over the list of regulators and matches up with the FDT values, * adjusting the actual voltage based on the supplied values. * * LOCKING: * The TWL_VEG exclusive lock must be held while this function is called. * * RETURNS: * Always returns 0. */ static int twl_vreg_add_regulators(struct twl_vreg_softc *sc, const struct twl_regulator *regulators) { int err; int millivolts; const struct twl_regulator *walker; struct twl_regulator_entry *entry; phandle_t child; char rnames[256]; char *name, *voltage; int len = 0, prop_len; /* Add the regulators from the list */ walker = ®ulators[0]; while (walker->name != NULL) { /* Add the regulator to the list */ entry = twl_vreg_add_regulator(sc, walker->name, walker->subdev, walker->regbase, walker->fixedvoltage, walker->voltages, walker->num_voltages); if (entry == NULL) continue; walker++; } /* Check if the FDT is telling us to set any voltages */ child = ofw_bus_get_node(sc->sc_pdev); if (child) { prop_len = OF_getprop(child, "voltage-regulators", rnames, sizeof(rnames)); while (len < prop_len) { name = rnames + len; len += strlen(name) + 1; if ((len >= prop_len) || (name[0] == '\0')) break; voltage = rnames + len; len += strlen(voltage) + 1; if (voltage[0] == '\0') break; millivolts = strtoul(voltage, NULL, 0); LIST_FOREACH(entry, &sc->sc_vreg_list, entries) { if (strcmp(entry->name, name) == 0) { twl_vreg_write_regulator_voltage(sc, entry, millivolts); break; } } } } if (twl_vreg_debug) { LIST_FOREACH(entry, &sc->sc_vreg_list, entries) { err = twl_vreg_read_regulator_voltage(sc, entry, &millivolts); if (!err) device_printf(sc->sc_dev, "%s : %d mV\n", entry->name, millivolts); } } return (0); } /** * twl_vreg_init - initialises the list of regulators * @dev: the twl_vreg device * * This function is called as an intrhook once interrupts have been enabled, * this is done so that the driver has the option to enable/disable or set * the voltage level based on settings providied in the FDT. * * LOCKING: * Takes the exclusive lock in the function. */ static void twl_vreg_init(void *dev) { struct twl_vreg_softc *sc; sc = device_get_softc((device_t)dev); TWL_VREG_XLOCK(sc); if (twl_is_4030(sc->sc_pdev)) twl_vreg_add_regulators(sc, twl4030_regulators); else if (twl_is_6030(sc->sc_pdev) || twl_is_6025(sc->sc_pdev)) twl_vreg_add_regulators(sc, twl6030_regulators); TWL_VREG_XUNLOCK(sc); config_intrhook_disestablish(&sc->sc_init_hook); } static int twl_vreg_probe(device_t dev) { if (twl_is_4030(device_get_parent(dev))) device_set_desc(dev, "TI TWL4030 PMIC Voltage Regulators"); else if (twl_is_6025(device_get_parent(dev)) || twl_is_6030(device_get_parent(dev))) device_set_desc(dev, "TI TWL6025/TWL6030 PMIC Voltage Regulators"); else return (ENXIO); return (0); } static int twl_vreg_attach(device_t dev) { struct twl_vreg_softc *sc; sc = device_get_softc(dev); sc->sc_dev = dev; sc->sc_pdev = device_get_parent(dev); TWL_VREG_LOCK_INIT(sc); LIST_INIT(&sc->sc_vreg_list); /* We have to wait until interrupts are enabled. I2C read and write * only works if the interrupts are available. */ sc->sc_init_hook.ich_func = twl_vreg_init; sc->sc_init_hook.ich_arg = dev; if (config_intrhook_establish(&sc->sc_init_hook) != 0) return (ENOMEM); return (0); } static int twl_vreg_detach(device_t dev) { struct twl_vreg_softc *sc; struct twl_regulator_entry *regulator; struct twl_regulator_entry *tmp; sc = device_get_softc(dev); /* Take the lock and free all the added regulators */ TWL_VREG_XLOCK(sc); LIST_FOREACH_SAFE(regulator, &sc->sc_vreg_list, entries, tmp) { LIST_REMOVE(regulator, entries); sysctl_remove_oid(regulator->oid, 1, 0); free(regulator, M_DEVBUF); } TWL_VREG_XUNLOCK(sc); TWL_VREG_LOCK_DESTROY(sc); return (0); } static device_method_t twl_vreg_methods[] = { DEVMETHOD(device_probe, twl_vreg_probe), DEVMETHOD(device_attach, twl_vreg_attach), DEVMETHOD(device_detach, twl_vreg_detach), {0, 0}, }; static driver_t twl_vreg_driver = { "twl_vreg", twl_vreg_methods, sizeof(struct twl_vreg_softc), }; static devclass_t twl_vreg_devclass; DRIVER_MODULE(twl_vreg, twl, twl_vreg_driver, twl_vreg_devclass, 0, 0); MODULE_VERSION(twl_vreg, 1);