/*- * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /** * @file * * @brief This file contains all of the method implementations pertaining * to the framework remote device READY sub-state handler methods. */ #include #include #include #include #include #include #include #include #include #include #include #include //****************************************************************************** //* P R I V A T E M E T H O D S //****************************************************************************** /** * @brief This method implements the behavior common to starting a task mgmt * request. It will change the ready substate to task management. * * @param[in] fw_device This parameter specifies the remote device for * which to complete a request. * @param[in] fw_task This parameter specifies the task management * request being started. * * @return This method returns a value indicating the status of the * start operation. */ static SCI_STATUS scif_sas_remote_device_start_task_request( SCIF_SAS_REMOTE_DEVICE_T * fw_device, SCIF_SAS_TASK_REQUEST_T * fw_task ) { // Transition into the TASK MGMT substate if not already in it. if (fw_device->ready_substate_machine.current_state_id != SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_TASK_MGMT) { sci_base_state_machine_change_state( &fw_device->ready_substate_machine, SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_TASK_MGMT ); } fw_device->request_count++; fw_device->task_request_count++; return SCI_SUCCESS; } //****************************************************************************** //* R E A D Y O P E R A T I O N A L H A N D L E R S //****************************************************************************** /** * @brief This method provides OPERATIONAL sub-state specific handling for * when the core remote device object issues a device not ready * notification. * * @param[in] remote_device This parameter specifies the remote device * object for which the notification occurred. * * @return none. */ static void scif_sas_remote_device_ready_operational_not_ready_handler( SCIF_SAS_REMOTE_DEVICE_T * fw_device, U32 reason_code ) { if (reason_code == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) { sci_base_state_machine_change_state( &fw_device->ready_substate_machine, SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR ); } else { // Even though we are in the OPERATIONAL state, the core remote device is not // ready. As a result, we process user requests/events as if we were // stopping the framework remote device. sci_base_state_machine_change_state( &fw_device->ready_substate_machine, SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_SUSPENDED ); } } /** * @brief This method provides TASK MGMT sub-state specific handling for when * the core remote device object issues a device not ready notification. * * @param[in] remote_device This parameter specifies the remote device * object for which the notification occurred. * * @return none. */ static void scif_sas_remote_device_ready_task_management_not_ready_handler( SCIF_SAS_REMOTE_DEVICE_T * fw_device, U32 reason_code ) { //do nothing. Don't need to go to suspended substate. } /** * @brief This method provides OPERATIONAL sub-state specific handling for * when the remote device is being stopped by the framework. * * @param[in] remote_device This parameter specifies the remote device * object for which the stop operation is being requested. * * @return This method returns an indication as to whether the failure * operation completed successfully. */ static SCI_STATUS scif_sas_remote_device_ready_operational_stop_handler( SCI_BASE_REMOTE_DEVICE_T * remote_device ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T *) remote_device; sci_base_state_machine_change_state( &fw_device->parent.state_machine, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING ); return fw_device->operation_status; } /** * @brief This method provides OPERATIONAL sub-state specific handling for * when the user attempts to destruct the remote device. In * the READY state the framework must first stop the device * before destructing it. * * @param[in] remote_device This parameter specifies the remote device * object for which the framework is attempting to start. * * @return This method returns an indication as to whether the destruct * operation completed successfully. */ static SCI_STATUS scif_sas_remote_device_ready_operational_destruct_handler( SCI_BASE_REMOTE_DEVICE_T * remote_device ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T *) remote_device; fw_device->destruct_when_stopped = TRUE; return (fw_device->state_handlers->parent.stop_handler(&fw_device->parent)); } /** * @brief This method provides OPERATIONAL sub-state specific handling for * when the remote device undergoes a failure condition. * * @param[in] remote_device This parameter specifies the remote device * object for which the failure condition occurred. * * @return This method returns an indication as to whether the failure * operation completed successfully. */ static SCI_STATUS scif_sas_remote_device_ready_operational_fail_handler( SCI_BASE_REMOTE_DEVICE_T * remote_device ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T *) remote_device; SCIF_LOG_WARNING(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE, "RemoteDevice:0x%x ready device failed\n", fw_device )); sci_base_state_machine_change_state( &fw_device->parent.state_machine, SCI_BASE_REMOTE_DEVICE_STATE_FAILED ); /// @todo Fix the return code handling. return SCI_FAILURE; } /** * @brief This method provides OPERATIONAL sub-state specific handling for * when a user attempts to start an IO request on a remote * device. * * @param[in] remote_device This parameter specifies the remote device * object on which the user is attempting to perform a start * IO operation. * @param[in] io_request This parameter specifies the IO request to be * started. * * @return This method returns an indication as to whether the IO request * started successfully. */ static SCI_STATUS scif_sas_remote_device_ready_operational_start_io_handler( SCI_BASE_REMOTE_DEVICE_T * remote_device, SCI_BASE_REQUEST_T * io_request ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) remote_device; SCIF_SAS_IO_REQUEST_T * fw_io = (SCIF_SAS_IO_REQUEST_T*) io_request; SCI_STATUS status; status = fw_io->parent.state_handlers->start_handler(&fw_io->parent.parent); if (status == SCI_SUCCESS) { fw_device->request_count++; } return status; } /** * @brief This method provides OPERATIONAL sub-state specific handling for * when a user attempts to start an IO request on a remote * device. * * @param[in] remote_device This parameter specifies the remote device * object on which the user is attempting to perform a complete * IO operation. * @param[in] io_request This parameter specifies the IO request to * be completed. * * @return This method returns an indication as to whether the IO request * completed successfully. */ SCI_STATUS scif_sas_remote_device_ready_operational_complete_io_handler( SCI_BASE_REMOTE_DEVICE_T * remote_device, SCI_BASE_REQUEST_T * io_request ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) remote_device; fw_device->request_count--; return SCI_SUCCESS; } /** * @brief This method provides OPERATIONAL sub-state specific handling for * when a user attempts to start an IO request on a remote * device. * * @param[in] remote_device This parameter specifies the remote device * object on which the user is attempting to perform a complete * IO operation. * @param[in] io_request This parameter specifies the IO request to * be completed. * * @return This method returns an indication as to whether the IO request * completed successfully. */ static SCI_STATUS scif_sas_remote_device_ready_operational_complete_high_priority_io_handler( SCI_BASE_REMOTE_DEVICE_T * remote_device, SCI_BASE_REQUEST_T * io_request, void * response_data, SCI_IO_STATUS completion_status ) { SCIF_LOG_WARNING(( sci_base_object_get_logger((SCIF_SAS_REMOTE_DEVICE_T *)remote_device), SCIF_LOG_OBJECT_REMOTE_DEVICE, "RemoteDevice:0x%x State:0x%x invalid state to complete high priority IO\n", remote_device, sci_base_state_machine_get_state( &((SCIF_SAS_REMOTE_DEVICE_T *)remote_device)->parent.state_machine) )); return SCI_FAILURE_INVALID_STATE; } /** * @brief This method provides OPERATIONAL sub-state specific handling for when * the framework attempts to continue an IO request on a remote * device. * * @param[in] remote_device This parameter specifies the remote device * object on which the user is attempting to perform a continue * IO operation. * @param[in] io_request This parameter specifies the IO request to * be continued. * * @return This method returns an indication as to whether the IO request * completed successfully. */ static SCI_STATUS scif_sas_remote_device_ready_operational_continue_io_handler( SCI_BASE_REMOTE_DEVICE_T * remote_device, SCI_BASE_REQUEST_T * io_request ) { /// @todo Fix the return code handling. return SCI_FAILURE; } /** * @brief This method provides OPERATIONAL sub-state specific handling for * when a user attempts to start a task management request on * a remote device. This includes terminating all of the affected * ongoing IO requests (i.e. aborting them in the silicon) and then * issuing the task management request to the silicon. * * @param[in] remote_device This parameter specifies the remote device * object on which the user is attempting to perform a start * task operation. * @param[in] task_request This parameter specifies the task management * request to be started. * * @return This method returns an indication as to whether the task * management request started successfully. */ static SCI_STATUS scif_sas_remote_device_ready_operational_start_task_handler( SCI_BASE_REMOTE_DEVICE_T * remote_device, SCI_BASE_REQUEST_T * task_request ) { SCI_STATUS status = SCI_FAILURE; SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) remote_device; SCIF_SAS_TASK_REQUEST_T * fw_task = (SCIF_SAS_TASK_REQUEST_T*) task_request; U8 task_function = scif_sas_task_request_get_function(fw_task); SMP_DISCOVER_RESPONSE_PROTOCOLS_T dev_protocols; scic_remote_device_get_protocols(fw_device->core_object, &dev_protocols); if ( dev_protocols.u.bits.attached_ssp_target || dev_protocols.u.bits.attached_stp_target) { // //NOTE: For STP/SATA targets we currently terminate all requests for // any type of task management. if ( (task_function == SCI_SAS_ABORT_TASK_SET) || (task_function == SCI_SAS_CLEAR_TASK_SET) || (task_function == SCI_SAS_LOGICAL_UNIT_RESET) || (task_function == SCI_SAS_I_T_NEXUS_RESET) || (task_function == SCI_SAS_HARD_RESET) ) { // Terminate all of the requests in the silicon for this device. scif_sas_domain_terminate_requests( fw_device->domain, fw_device, NULL, fw_task ); status = scif_sas_remote_device_start_task_request(fw_device, fw_task); } else if ( (task_function == SCI_SAS_CLEAR_ACA) || (task_function == SCI_SAS_QUERY_TASK) || (task_function == SCI_SAS_QUERY_TASK_SET) || (task_function == SCI_SAS_QUERY_ASYNCHRONOUS_EVENT) ) { ASSERT(!dev_protocols.u.bits.attached_stp_target); status = scif_sas_remote_device_start_task_request(fw_device, fw_task); } else if (task_function == SCI_SAS_ABORT_TASK) { SCIF_SAS_REQUEST_T * fw_request = scif_sas_domain_get_request_by_io_tag( fw_device->domain, fw_task->io_tag_to_manage ); // Determine if the request being aborted was found. if (fw_request != NULL) { scif_sas_domain_terminate_requests( fw_device->domain, fw_device, fw_request, fw_task ); status = scif_sas_remote_device_start_task_request( fw_device, fw_task ); } else status = SCI_FAILURE_INVALID_IO_TAG; } } else status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; if (status != SCI_SUCCESS) { SCIF_LOG_ERROR(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE | SCIF_LOG_OBJECT_TASK_MANAGEMENT, "Controller:0x%x TaskRequest:0x%x Status:0x%x start task failure\n", fw_device, fw_task, status )); } return status; } /** * @brief This method provides OPERATIONAL sub-state specific handling for * when a user attempts to complete a task management request on * a remote device. * * @param[in] remote_device This parameter specifies the remote device object * on which the user is attempting to perform a complete task * operation. * @param[in] task_request This parameter specifies the task management * request to be completed. * * @return This method returns an indication as to whether the task * management request succeeded. */ SCI_STATUS scif_sas_remote_device_ready_operational_complete_task_handler( SCI_BASE_REMOTE_DEVICE_T * remote_device, SCI_BASE_REQUEST_T * task_request ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) remote_device; fw_device->request_count--; fw_device->task_request_count--; return SCI_SUCCESS; } /** * @brief This method provides OPERATIONAL sub-state specific handling for * when a user attempts to start a high priority IO request on a remote * device. * * @param[in] remote_device This parameter specifies the remote device * object on which the user is attempting to perform a start * IO operation. * @param[in] io_request This parameter specifies the IO request to be * started. * * @return This method returns an indication as to whether the IO request * started successfully. */ static SCI_STATUS scif_sas_remote_device_ready_operational_start_high_priority_io_handler( SCI_BASE_REMOTE_DEVICE_T * remote_device, SCI_BASE_REQUEST_T * io_request ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) remote_device; SCIF_SAS_IO_REQUEST_T * fw_io = (SCIF_SAS_IO_REQUEST_T*) io_request; SMP_DISCOVER_RESPONSE_PROTOCOLS_T dev_protocols; scic_remote_device_get_protocols(fw_device->core_object, &dev_protocols); if (dev_protocols.u.bits.attached_smp_target) { //transit to task management state for smp request phase. if (fw_device->ready_substate_machine.current_state_id != SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_TASK_MGMT) { sci_base_state_machine_change_state( &fw_device->ready_substate_machine, SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_TASK_MGMT ); } } fw_device->request_count++; return fw_io->parent.state_handlers->start_handler(&fw_io->parent.parent); } /** * @brief This method provides TASK MANAGEMENT sub-state specific handling for * when a user attempts to complete a task management request on * a remote device. * * @param[in] remote_device This parameter specifies the remote device object * on which the user is attempting to perform a complete task * operation. * @param[in] task_request This parameter specifies the task management * request to be completed. * * @return This method returns an indication as to whether the task * management request succeeded. */ SCI_STATUS scif_sas_remote_device_ready_task_management_complete_task_handler( SCI_BASE_REMOTE_DEVICE_T * remote_device, SCI_BASE_REQUEST_T * task_request ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) remote_device; SCIF_SAS_TASK_REQUEST_T * fw_task = (SCIF_SAS_TASK_REQUEST_T *) task_request; fw_device->request_count--; fw_device->task_request_count--; // All existing task management requests and all of the IO requests // affectected by the task management request must complete before // the remote device can transition back into the READY / OPERATIONAL // state. if ( (fw_device->task_request_count == 0) && (fw_task->affected_request_count == 0) ) { sci_base_state_machine_change_state( &fw_device->ready_substate_machine, SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL ); } return SCI_SUCCESS; } /** * @brief This method provides SUSPENDED sub-state specific handling for * when the core remote device object issues a device ready * notification. This effectively causes the framework remote * device to transition back into the OPERATIONAL state. * * @param[in] remote_device This parameter specifies the remote device * object for which the notification occurred. * * @return none. */ static void scif_sas_remote_device_ready_suspended_ready_handler( SCIF_SAS_REMOTE_DEVICE_T * fw_device ) { sci_base_state_machine_change_state( &fw_device->ready_substate_machine, SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL ); } /** * @brief This handler is currently solely used by smp remote device for * discovering. * * @param[in] remote_device This parameter specifies the remote device * object on which the user is attempting to perform a complete high * priority IO operation. * @param[in] io_request This parameter specifies the high priority IO request * to be completed. * * @return SCI_STATUS indicate whether the io complete successfully. */ SCI_STATUS scif_sas_remote_device_ready_task_management_complete_high_priority_io_handler( SCI_BASE_REMOTE_DEVICE_T * remote_device, SCI_BASE_REQUEST_T * io_request, void * response_data, SCI_IO_STATUS completion_status ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) remote_device; SCIF_SAS_REQUEST_T * fw_request = (SCIF_SAS_REQUEST_T*) io_request; SCI_STATUS status = SCI_SUCCESS; SCIC_TRANSPORT_PROTOCOL protocol; SCIF_LOG_TRACE(( sci_base_object_get_logger(remote_device), SCIF_LOG_OBJECT_REMOTE_DEVICE | SCIF_LOG_OBJECT_IO_REQUEST, "scif_sas_remote_device_ready_task_management_complete_high_priority_io_handler(0x%x, 0x%x, 0x%x, 0x%x) enter\n", remote_device, io_request, response_data, completion_status )); fw_device->request_count--; // we are back to ready operational sub state here. sci_base_state_machine_change_state( &fw_device->ready_substate_machine, SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL ); protocol = scic_io_request_get_protocol(fw_request->core_object); // If this request was an SMP initiator request we created, then // decode the response. if (protocol == SCIC_SMP_PROTOCOL) { if (completion_status != SCI_IO_FAILURE_TERMINATED) { status = scif_sas_smp_remote_device_decode_smp_response( fw_device, fw_request, response_data, completion_status ); } else scif_sas_smp_remote_device_terminated_request_handler(fw_device, fw_request); } else { // Currently, there are only internal SMP requests. So, default work // is simply to clean up the internal request. if (fw_request->is_internal == TRUE) { scif_sas_internal_io_request_complete( fw_device->domain->controller, (SCIF_SAS_INTERNAL_IO_REQUEST_T *)fw_request, SCI_SUCCESS ); } } return status; } SCIF_SAS_REMOTE_DEVICE_STATE_HANDLER_T scif_sas_remote_device_ready_substate_handler_table[] = { // SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL { { scif_sas_remote_device_default_start_handler, scif_sas_remote_device_ready_operational_stop_handler, scif_sas_remote_device_ready_operational_fail_handler, scif_sas_remote_device_ready_operational_destruct_handler, scif_sas_remote_device_default_reset_handler, scif_sas_remote_device_default_reset_complete_handler, scif_sas_remote_device_ready_operational_start_io_handler, scif_sas_remote_device_ready_operational_complete_io_handler, scif_sas_remote_device_ready_operational_continue_io_handler, scif_sas_remote_device_ready_operational_start_task_handler, scif_sas_remote_device_ready_operational_complete_task_handler }, scif_sas_remote_device_default_start_complete_handler, scif_sas_remote_device_default_stop_complete_handler, scif_sas_remote_device_default_ready_handler, scif_sas_remote_device_ready_operational_not_ready_handler, scif_sas_remote_device_ready_operational_start_high_priority_io_handler, // scif_sas_remote_device_ready_operational_complete_high_priority_io_handler }, // SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_SUSPENDED { { scif_sas_remote_device_default_start_handler, scif_sas_remote_device_ready_operational_stop_handler, scif_sas_remote_device_ready_operational_fail_handler, scif_sas_remote_device_ready_operational_destruct_handler, scif_sas_remote_device_default_reset_handler, scif_sas_remote_device_default_reset_complete_handler, scif_sas_remote_device_default_start_io_handler, scif_sas_remote_device_ready_operational_complete_io_handler, scif_sas_remote_device_default_continue_io_handler, scif_sas_remote_device_ready_operational_start_task_handler, scif_sas_remote_device_ready_operational_complete_task_handler }, scif_sas_remote_device_default_start_complete_handler, scif_sas_remote_device_default_stop_complete_handler, scif_sas_remote_device_ready_suspended_ready_handler, scif_sas_remote_device_default_not_ready_handler, scif_sas_remote_device_default_start_io_handler, scif_sas_remote_device_ready_operational_complete_high_priority_io_handler }, // SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_TASK_MGMT { { scif_sas_remote_device_default_start_handler, scif_sas_remote_device_ready_operational_stop_handler, scif_sas_remote_device_ready_operational_fail_handler, scif_sas_remote_device_ready_operational_destruct_handler, scif_sas_remote_device_default_reset_handler, scif_sas_remote_device_default_reset_complete_handler, scif_sas_remote_device_default_start_io_handler, scif_sas_remote_device_ready_operational_complete_io_handler, scif_sas_remote_device_ready_operational_continue_io_handler, scif_sas_remote_device_ready_operational_start_task_handler, scif_sas_remote_device_ready_task_management_complete_task_handler }, scif_sas_remote_device_default_start_complete_handler, scif_sas_remote_device_default_stop_complete_handler, scif_sas_remote_device_default_ready_handler, scif_sas_remote_device_ready_task_management_not_ready_handler, scif_sas_remote_device_ready_operational_start_high_priority_io_handler, scif_sas_remote_device_ready_task_management_complete_high_priority_io_handler }, // SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR { { scif_sas_remote_device_default_start_handler, scif_sas_remote_device_ready_operational_stop_handler, scif_sas_remote_device_ready_operational_fail_handler, scif_sas_remote_device_ready_operational_destruct_handler, scif_sas_remote_device_default_reset_handler, scif_sas_remote_device_default_reset_complete_handler, scif_sas_remote_device_default_start_io_handler, scif_sas_remote_device_ready_operational_complete_io_handler, scif_sas_remote_device_default_continue_io_handler, scif_sas_remote_device_ready_operational_start_task_handler, scif_sas_remote_device_ready_operational_complete_task_handler }, scif_sas_remote_device_default_start_complete_handler, scif_sas_remote_device_default_stop_complete_handler, scif_sas_remote_device_ready_suspended_ready_handler, scif_sas_remote_device_default_not_ready_handler, scif_sas_remote_device_default_start_io_handler, scif_sas_remote_device_ready_operational_complete_high_priority_io_handler }, };