/* * Copyright (C) 2011-2013 Matteo Landi, Luigi Rizzo. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * $FreeBSD$ * * The header contains the definitions of constants and function * prototypes used only in kernelspace. */ #ifndef _NET_NETMAP_KERN_H_ #define _NET_NETMAP_KERN_H_ #if defined(__FreeBSD__) #define likely(x) __builtin_expect(!!(x), 1) #define unlikely(x) __builtin_expect(!!(x), 0) #define NM_LOCK_T struct mtx #define NM_RWLOCK_T struct rwlock #define NM_SELINFO_T struct selinfo #define MBUF_LEN(m) ((m)->m_pkthdr.len) #define NM_SEND_UP(ifp, m) ((ifp)->if_input)(ifp, m) #elif defined (linux) #define NM_LOCK_T safe_spinlock_t // see bsd_glue.h #define NM_RWLOCK_T safe_spinlock_t // see bsd_glue.h #define NM_SELINFO_T wait_queue_head_t #define MBUF_LEN(m) ((m)->len) #define NM_SEND_UP(ifp, m) netif_rx(m) #ifndef DEV_NETMAP #define DEV_NETMAP #endif /* * IFCAP_NETMAP goes into net_device's priv_flags (if_capenable). * This was 16 bits up to linux 2.6.36, so we need a 16 bit value on older * platforms and tolerate the clash with IFF_DYNAMIC and IFF_BRIDGE_PORT. * For the 32-bit value, 0x100000 has no clashes until at least 3.5.1 */ #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) #define IFCAP_NETMAP 0x8000 #else #define IFCAP_NETMAP 0x200000 #endif #elif defined (__APPLE__) #warning apple support is incomplete. #define likely(x) __builtin_expect(!!(x), 1) #define unlikely(x) __builtin_expect(!!(x), 0) #define NM_LOCK_T IOLock * #define NM_SELINFO_T struct selinfo #define MBUF_LEN(m) ((m)->m_pkthdr.len) #define NM_SEND_UP(ifp, m) ((ifp)->if_input)(ifp, m) #else #error unsupported platform #endif /* end - platform-specific code */ #define ND(format, ...) #define D(format, ...) \ do { \ struct timeval __xxts; \ microtime(&__xxts); \ printf("%03d.%06d %s [%d] " format "\n", \ (int)__xxts.tv_sec % 1000, (int)__xxts.tv_usec, \ __FUNCTION__, __LINE__, ##__VA_ARGS__); \ } while (0) /* rate limited, lps indicates how many per second */ #define RD(lps, format, ...) \ do { \ static int t0, __cnt; \ if (t0 != time_second) { \ t0 = time_second; \ __cnt = 0; \ } \ if (__cnt++ < lps) \ D(format, ##__VA_ARGS__); \ } while (0) struct netmap_adapter; struct nm_bdg_fwd; struct nm_bridge; struct netmap_priv_d; /* * private, kernel view of a ring. Keeps track of the status of * a ring across system calls. * * nr_hwcur index of the next buffer to refill. * It corresponds to ring->cur - ring->reserved * * nr_hwavail the number of slots "owned" by userspace. * nr_hwavail =:= ring->avail + ring->reserved * * The indexes in the NIC and netmap rings are offset by nkr_hwofs slots. * This is so that, on a reset, buffers owned by userspace are not * modified by the kernel. In particular: * RX rings: the next empty buffer (hwcur + hwavail + hwofs) coincides with * the next empty buffer as known by the hardware (next_to_check or so). * TX rings: hwcur + hwofs coincides with next_to_send * * For received packets, slot->flags is set to nkr_slot_flags * so we can provide a proper initial value (e.g. set NS_FORWARD * when operating in 'transparent' mode). */ struct netmap_kring { struct netmap_ring *ring; u_int nr_hwcur; int nr_hwavail; u_int nr_kflags; /* private driver flags */ #define NKR_PENDINTR 0x1 // Pending interrupt. u_int nkr_num_slots; uint16_t nkr_slot_flags; /* initial value for flags */ int nkr_hwofs; /* offset between NIC and netmap ring */ struct netmap_adapter *na; struct nm_bdg_fwd *nkr_ft; NM_SELINFO_T si; /* poll/select wait queue */ NM_LOCK_T q_lock; /* used if no device lock available */ } __attribute__((__aligned__(64))); /* * This struct extends the 'struct adapter' (or * equivalent) device descriptor. It contains all fields needed to * support netmap operation. */ struct netmap_adapter { /* * On linux we do not have a good way to tell if an interface * is netmap-capable. So we use the following trick: * NA(ifp) points here, and the first entry (which hopefully * always exists and is at least 32 bits) contains a magic * value which we can use to detect that the interface is good. */ uint32_t magic; uint32_t na_flags; /* future place for IFCAP_NETMAP */ #define NAF_SKIP_INTR 1 /* use the regular interrupt handler. * useful during initialization */ #define NAF_SW_ONLY 2 /* forward packets only to sw adapter */ int refcount; /* number of user-space descriptors using this interface, which is equal to the number of struct netmap_if objs in the mapped region. */ /* * The selwakeup in the interrupt thread can use per-ring * and/or global wait queues. We track how many clients * of each type we have so we can optimize the drivers, * and especially avoid huge contention on the locks. */ int na_single; /* threads attached to a single hw queue */ int na_multi; /* threads attached to multiple hw queues */ int separate_locks; /* set if the interface suports different locks for rx, tx and core. */ u_int num_rx_rings; /* number of adapter receive rings */ u_int num_tx_rings; /* number of adapter transmit rings */ u_int num_tx_desc; /* number of descriptor in each queue */ u_int num_rx_desc; /* tx_rings and rx_rings are private but allocated * as a contiguous chunk of memory. Each array has * N+1 entries, for the adapter queues and for the host queue. */ struct netmap_kring *tx_rings; /* array of TX rings. */ struct netmap_kring *rx_rings; /* array of RX rings. */ NM_SELINFO_T tx_si, rx_si; /* global wait queues */ /* copy of if_qflush and if_transmit pointers, to intercept * packets from the network stack when netmap is active. */ int (*if_transmit)(struct ifnet *, struct mbuf *); /* references to the ifnet and device routines, used by * the generic netmap functions. */ struct ifnet *ifp; /* adapter is ifp->if_softc */ NM_LOCK_T core_lock; /* used if no device lock available */ int (*nm_register)(struct ifnet *, int onoff); void (*nm_lock)(struct ifnet *, int what, u_int ringid); int (*nm_txsync)(struct ifnet *, u_int ring, int lock); int (*nm_rxsync)(struct ifnet *, u_int ring, int lock); /* return configuration information */ int (*nm_config)(struct ifnet *, u_int *txr, u_int *txd, u_int *rxr, u_int *rxd); /* * Bridge support: * * bdg_port is the port number used in the bridge; * na_bdg_refcount is a refcount used for bridge ports, * when it goes to 0 we can detach+free this port * (a bridge port is always attached if it exists; * it is not always registered) * na_bdg points to the bridge this NA is attached to. */ int bdg_port; int na_bdg_refcount; struct nm_bridge *na_bdg; /* When we attach a physical interface to the bridge, we * allow the controlling process to terminate, so we need * a place to store the netmap_priv_d data structure. * This is only done when physical interfaces are attached to a bridge. */ struct netmap_priv_d *na_kpriv; #ifdef linux struct net_device_ops nm_ndo; #endif /* linux */ }; /* * The combination of "enable" (ifp->if_capenable & IFCAP_NETMAP) * and refcount gives the status of the interface, namely: * * enable refcount Status * * FALSE 0 normal operation * FALSE != 0 -- (impossible) * TRUE 1 netmap mode * TRUE 0 being deleted. */ #define NETMAP_DELETING(_na) ( ((_na)->refcount == 0) && \ ( (_na)->ifp->if_capenable & IFCAP_NETMAP) ) /* * parameters for (*nm_lock)(adapter, what, index) */ enum { NETMAP_NO_LOCK = 0, NETMAP_CORE_LOCK, NETMAP_CORE_UNLOCK, NETMAP_TX_LOCK, NETMAP_TX_UNLOCK, NETMAP_RX_LOCK, NETMAP_RX_UNLOCK, #ifdef __FreeBSD__ #define NETMAP_REG_LOCK NETMAP_CORE_LOCK #define NETMAP_REG_UNLOCK NETMAP_CORE_UNLOCK #else NETMAP_REG_LOCK, NETMAP_REG_UNLOCK #endif }; /* How to handle locking support in netmap_rx_irq/netmap_tx_irq */ #define NETMAP_LOCKED_ENTER 0x10000000 /* already locked on enter */ #define NETMAP_LOCKED_EXIT 0x20000000 /* keep locked on exit */ /* * The following are support routines used by individual drivers to * support netmap operation. * * netmap_attach() initializes a struct netmap_adapter, allocating the * struct netmap_ring's and the struct selinfo. * * netmap_detach() frees the memory allocated by netmap_attach(). * * netmap_start() replaces the if_transmit routine of the interface, * and is used to intercept packets coming from the stack. * * netmap_load_map/netmap_reload_map are helper routines to set/reset * the dmamap for a packet buffer * * netmap_reset() is a helper routine to be called in the driver * when reinitializing a ring. */ int netmap_attach(struct netmap_adapter *, int); void netmap_detach(struct ifnet *); int netmap_start(struct ifnet *, struct mbuf *); enum txrx { NR_RX = 0, NR_TX = 1 }; struct netmap_slot *netmap_reset(struct netmap_adapter *na, enum txrx tx, int n, u_int new_cur); int netmap_ring_reinit(struct netmap_kring *); /* * The following bridge-related interfaces are used by other kernel modules * In the version that only supports unicast or broadcast, the lookup * function can return 0 .. NM_BDG_MAXPORTS-1 for regular ports, * NM_BDG_MAXPORTS for broadcast, NM_BDG_MAXPORTS+1 for unknown. * XXX in practice "unknown" might be handled same as broadcast. */ typedef u_int (*bdg_lookup_fn_t)(char *buf, u_int len, uint8_t *ring_nr, struct netmap_adapter *); int netmap_bdg_ctl(struct nmreq *nmr, bdg_lookup_fn_t func); u_int netmap_bdg_learning(char *, u_int, uint8_t *, struct netmap_adapter *); #define NM_NAME "vale" /* prefix for the bridge port name */ #define NM_BDG_MAXPORTS 254 /* up to 32 for bitmap, 254 ok otherwise */ #define NM_BDG_BROADCAST NM_BDG_MAXPORTS #define NM_BDG_NOPORT (NM_BDG_MAXPORTS+1) extern u_int netmap_buf_size; #define NETMAP_BUF_SIZE netmap_buf_size // XXX remove extern int netmap_mitigate; extern int netmap_no_pendintr; extern u_int netmap_total_buffers; extern char *netmap_buffer_base; extern int netmap_verbose; // XXX debugging enum { /* verbose flags */ NM_VERB_ON = 1, /* generic verbose */ NM_VERB_HOST = 0x2, /* verbose host stack */ NM_VERB_RXSYNC = 0x10, /* verbose on rxsync/txsync */ NM_VERB_TXSYNC = 0x20, NM_VERB_RXINTR = 0x100, /* verbose on rx/tx intr (driver) */ NM_VERB_TXINTR = 0x200, NM_VERB_NIC_RXSYNC = 0x1000, /* verbose on rx/tx intr (driver) */ NM_VERB_NIC_TXSYNC = 0x2000, }; /* * NA returns a pointer to the struct netmap adapter from the ifp, * WNA is used to write it. * SWNA() is used for the "host stack" endpoint associated * to an interface. It is allocated together with the main NA(), * as an array of two objects. */ #ifndef WNA #define WNA(_ifp) (_ifp)->if_pspare[0] #endif #define NA(_ifp) ((struct netmap_adapter *)WNA(_ifp)) #define SWNA(_ifp) (NA(_ifp) + 1) /* * Macros to determine if an interface is netmap capable or netmap enabled. * See the magic field in struct netmap_adapter. */ #ifdef __FreeBSD__ /* * on FreeBSD just use if_capabilities and if_capenable. */ #define NETMAP_CAPABLE(ifp) (NA(ifp) && \ (ifp)->if_capabilities & IFCAP_NETMAP ) #define NETMAP_SET_CAPABLE(ifp) \ (ifp)->if_capabilities |= IFCAP_NETMAP #else /* linux */ /* * on linux: * we check if NA(ifp) is set and its first element has a related * magic value. The capenable is within the struct netmap_adapter. */ #define NETMAP_MAGIC 0x52697a7a #define NETMAP_CAPABLE(ifp) (NA(ifp) && \ ((uint32_t)(uintptr_t)NA(ifp) ^ NA(ifp)->magic) == NETMAP_MAGIC ) #define NETMAP_SET_CAPABLE(ifp) \ NA(ifp)->magic = ((uint32_t)(uintptr_t)NA(ifp)) ^ NETMAP_MAGIC #endif /* linux */ #ifdef __FreeBSD__ /* Callback invoked by the dma machinery after a successfull dmamap_load */ static void netmap_dmamap_cb(__unused void *arg, __unused bus_dma_segment_t * segs, __unused int nseg, __unused int error) { } /* bus_dmamap_load wrapper: call aforementioned function if map != NULL. * XXX can we do it without a callback ? */ static inline void netmap_load_map(bus_dma_tag_t tag, bus_dmamap_t map, void *buf) { if (map) bus_dmamap_load(tag, map, buf, NETMAP_BUF_SIZE, netmap_dmamap_cb, NULL, BUS_DMA_NOWAIT); } /* update the map when a buffer changes. */ static inline void netmap_reload_map(bus_dma_tag_t tag, bus_dmamap_t map, void *buf) { if (map) { bus_dmamap_unload(tag, map); bus_dmamap_load(tag, map, buf, NETMAP_BUF_SIZE, netmap_dmamap_cb, NULL, BUS_DMA_NOWAIT); } } #else /* linux */ /* * XXX How do we redefine these functions: * * on linux we need * dma_map_single(&pdev->dev, virt_addr, len, direction) * dma_unmap_single(&adapter->pdev->dev, phys_addr, len, direction * The len can be implicit (on netmap it is NETMAP_BUF_SIZE) * unfortunately the direction is not, so we need to change * something to have a cross API */ #define netmap_load_map(_t, _m, _b) #define netmap_reload_map(_t, _m, _b) #if 0 struct e1000_buffer *buffer_info = &tx_ring->buffer_info[l]; /* set time_stamp *before* dma to help avoid a possible race */ buffer_info->time_stamp = jiffies; buffer_info->mapped_as_page = false; buffer_info->length = len; //buffer_info->next_to_watch = l; /* reload dma map */ dma_unmap_single(&adapter->pdev->dev, buffer_info->dma, NETMAP_BUF_SIZE, DMA_TO_DEVICE); buffer_info->dma = dma_map_single(&adapter->pdev->dev, addr, NETMAP_BUF_SIZE, DMA_TO_DEVICE); if (dma_mapping_error(&adapter->pdev->dev, buffer_info->dma)) { D("dma mapping error"); /* goto dma_error; See e1000_put_txbuf() */ /* XXX reset */ } tx_desc->buffer_addr = htole64(buffer_info->dma); //XXX #endif /* * The bus_dmamap_sync() can be one of wmb() or rmb() depending on direction. */ #define bus_dmamap_sync(_a, _b, _c) #endif /* linux */ /* * functions to map NIC to KRING indexes (n2k) and vice versa (k2n) */ static inline int netmap_idx_n2k(struct netmap_kring *kr, int idx) { int n = kr->nkr_num_slots; idx += kr->nkr_hwofs; if (idx < 0) return idx + n; else if (idx < n) return idx; else return idx - n; } static inline int netmap_idx_k2n(struct netmap_kring *kr, int idx) { int n = kr->nkr_num_slots; idx -= kr->nkr_hwofs; if (idx < 0) return idx + n; else if (idx < n) return idx; else return idx - n; } /* Entries of the look-up table. */ struct lut_entry { void *vaddr; /* virtual address. */ vm_paddr_t paddr; /* physical address. */ }; struct netmap_obj_pool; extern struct lut_entry *netmap_buffer_lut; #define NMB_VA(i) (netmap_buffer_lut[i].vaddr) #define NMB_PA(i) (netmap_buffer_lut[i].paddr) /* * NMB return the virtual address of a buffer (buffer 0 on bad index) * PNMB also fills the physical address */ static inline void * NMB(struct netmap_slot *slot) { uint32_t i = slot->buf_idx; return (unlikely(i >= netmap_total_buffers)) ? NMB_VA(0) : NMB_VA(i); } static inline void * PNMB(struct netmap_slot *slot, uint64_t *pp) { uint32_t i = slot->buf_idx; void *ret = (i >= netmap_total_buffers) ? NMB_VA(0) : NMB_VA(i); *pp = (i >= netmap_total_buffers) ? NMB_PA(0) : NMB_PA(i); return ret; } /* default functions to handle rx/tx interrupts */ int netmap_rx_irq(struct ifnet *, int, int *); #define netmap_tx_irq(_n, _q) netmap_rx_irq(_n, _q, NULL) #endif /* _NET_NETMAP_KERN_H_ */