/* * /src/NTP/REPOSITORY/ntp4-dev/parseutil/dcfd.c,v 4.18 2005/10/07 22:08:18 kardel RELEASE_20051008_A * * dcfd.c,v 4.18 2005/10/07 22:08:18 kardel RELEASE_20051008_A * * DCF77 100/200ms pulse synchronisation daemon program (via 50Baud serial line) * * Features: * DCF77 decoding * simple NTP loopfilter logic for local clock * interactive display for debugging * * Lacks: * Leap second handling (at that level you should switch to NTP Version 4 - really!) * * Copyright (c) 1995-2015 by Frank Kardel ntp.org> * Copyright (c) 1989-1994 by Frank Kardel, Friedrich-Alexander Universitaet Erlangen-Nuernberg, Germany * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #ifdef HAVE_CONFIG_H # include #endif #include #include #include #include #include #include #include #include #include /* * NTP compilation environment */ #include "ntp_stdlib.h" #include "ntpd.h" /* indirectly include ntp.h to get YEAR_PIVOT Y2KFixes */ /* * select which terminal handling to use (currently only SysV variants) */ #if defined(HAVE_TERMIOS_H) || defined(STREAM) #include #define TTY_GETATTR(_FD_, _ARG_) tcgetattr((_FD_), (_ARG_)) #define TTY_SETATTR(_FD_, _ARG_) tcsetattr((_FD_), TCSANOW, (_ARG_)) #else /* not HAVE_TERMIOS_H || STREAM */ # if defined(HAVE_TERMIO_H) || defined(HAVE_SYSV_TTYS) # include # define TTY_GETATTR(_FD_, _ARG_) ioctl((_FD_), TCGETA, (_ARG_)) # define TTY_SETATTR(_FD_, _ARG_) ioctl((_FD_), TCSETAW, (_ARG_)) # endif/* HAVE_TERMIO_H || HAVE_SYSV_TTYS */ #endif /* not HAVE_TERMIOS_H || STREAM */ #ifndef TTY_GETATTR #include "Bletch: MUST DEFINE ONE OF 'HAVE_TERMIOS_H' or 'HAVE_TERMIO_H'" #endif #ifndef days_per_year #define days_per_year(_x_) (((_x_) % 4) ? 365 : (((_x_) % 400) ? 365 : 366)) #endif #define timernormalize(_a_) \ if ((_a_)->tv_usec >= 1000000) \ { \ (_a_)->tv_sec += (_a_)->tv_usec / 1000000; \ (_a_)->tv_usec = (_a_)->tv_usec % 1000000; \ } \ if ((_a_)->tv_usec < 0) \ { \ (_a_)->tv_sec -= 1 + (-(_a_)->tv_usec / 1000000); \ (_a_)->tv_usec = 999999 - (-(_a_)->tv_usec - 1); \ } #ifdef timeradd #undef timeradd #endif #define timeradd(_a_, _b_) \ (_a_)->tv_sec += (_b_)->tv_sec; \ (_a_)->tv_usec += (_b_)->tv_usec; \ timernormalize((_a_)) #ifdef timersub #undef timersub #endif #define timersub(_a_, _b_) \ (_a_)->tv_sec -= (_b_)->tv_sec; \ (_a_)->tv_usec -= (_b_)->tv_usec; \ timernormalize((_a_)) /* * debug macros */ #define PRINTF if (interactive) printf #define LPRINTF if (interactive && loop_filter_debug) printf #ifdef DEBUG #define dprintf(_x_) LPRINTF _x_ #else #define dprintf(_x_) #endif #ifdef DECL_ERRNO extern int errno; #endif static char *revision = "4.18"; /* * display received data (avoids also detaching from tty) */ static int interactive = 0; /* * display loopfilter (clock control) variables */ static int loop_filter_debug = 0; /* * do not set/adjust system time */ static int no_set = 0; /* * time that passes between start of DCF impulse and time stamping (fine * adjustment) in microseconds (receiver/OS dependent) */ #define DEFAULT_DELAY 230000 /* rough estimate */ /* * The two states we can be in - eithe we receive nothing * usable or we have the correct time */ #define NO_SYNC 0x01 #define SYNC 0x02 static int sync_state = NO_SYNC; static time_t last_sync; static unsigned long ticks = 0; static char pat[] = "-\\|/"; #define LINES (24-2) /* error lines after which the two headlines are repeated */ #define MAX_UNSYNC (10*60) /* allow synchronisation loss for 10 minutes */ #define NOTICE_INTERVAL (20*60) /* mention missing synchronisation every 20 minutes */ /* * clock adjustment PLL - see NTP protocol spec (RFC1305) for details */ #define USECSCALE 10 #define TIMECONSTANT 2 #define ADJINTERVAL 0 #define FREQ_WEIGHT 18 #define PHASE_WEIGHT 7 #define MAX_DRIFT 0x3FFFFFFF #define R_SHIFT(_X_, _Y_) (((_X_) < 0) ? -(-(_X_) >> (_Y_)) : ((_X_) >> (_Y_))) static long max_adj_offset_usec = 128000; static long clock_adjust = 0; /* current adjustment value (usec * 2^USECSCALE) */ static long accum_drift = 0; /* accumulated drift value (usec / ADJINTERVAL) */ static long adjustments = 0; static char skip_adjust = 1; /* discard first adjustment (bad samples) */ /* * DCF77 state flags */ #define DCFB_ANNOUNCE 0x0001 /* switch time zone warning (DST switch) */ #define DCFB_DST 0x0002 /* DST in effect */ #define DCFB_LEAP 0x0004 /* LEAP warning (1 hour prior to occurrence) */ #define DCFB_CALLBIT 0x0008 /* "call bit" used to signalize irregularities in the control facilities */ struct clocktime /* clock time broken up from time code */ { long wday; /* Day of week: 1: Monday - 7: Sunday */ long day; long month; long year; long hour; long minute; long second; long usecond; long utcoffset; /* in minutes */ long flags; /* current clock status (DCF77 state flags) */ }; typedef struct clocktime clocktime_t; /* * (usually) quick constant multiplications */ #ifndef TIMES10 #define TIMES10(_X_) (((_X_) << 3) + ((_X_) << 1)) /* *8 + *2 */ #endif #ifndef TIMES24 #define TIMES24(_X_) (((_X_) << 4) + ((_X_) << 3)) /* *16 + *8 */ #endif #ifndef TIMES60 #define TIMES60(_X_) ((((_X_) << 4) - (_X_)) << 2) /* *(16 - 1) *4 */ #endif /* * generic l_abs() function */ #define l_abs(_x_) (((_x_) < 0) ? -(_x_) : (_x_)) /* * conversion related return/error codes */ #define CVT_MASK 0x0000000F /* conversion exit code */ #define CVT_NONE 0x00000001 /* format not applicable */ #define CVT_FAIL 0x00000002 /* conversion failed - error code returned */ #define CVT_OK 0x00000004 /* conversion succeeded */ #define CVT_BADFMT 0x00000010 /* general format error - (unparsable) */ #define CVT_BADDATE 0x00000020 /* invalid date */ #define CVT_BADTIME 0x00000040 /* invalid time */ /* * DCF77 raw time code * * From "Zur Zeit", Physikalisch-Technische Bundesanstalt (PTB), Braunschweig * und Berlin, Maerz 1989 * * Timecode transmission: * AM: * time marks are send every second except for the second before the * next minute mark * time marks consist of a reduction of transmitter power to 25% * of the nominal level * the falling edge is the time indication (on time) * time marks of a 100ms duration constitute a logical 0 * time marks of a 200ms duration constitute a logical 1 * FM: * see the spec. (basically a (non-)inverted psuedo random phase shift) * * Encoding: * Second Contents * 0 - 10 AM: free, FM: 0 * 11 - 14 free * 15 R - "call bit" used to signalize irregularities in the control facilities * (until 2003 indicated transmission via alternate antenna) * 16 A1 - expect zone change (1 hour before) * 17 - 18 Z1,Z2 - time zone * 0 0 illegal * 0 1 MEZ (MET) * 1 0 MESZ (MED, MET DST) * 1 1 illegal * 19 A2 - expect leap insertion/deletion (1 hour before) * 20 S - start of time code (1) * 21 - 24 M1 - BCD (lsb first) Minutes * 25 - 27 M10 - BCD (lsb first) 10 Minutes * 28 P1 - Minute Parity (even) * 29 - 32 H1 - BCD (lsb first) Hours * 33 - 34 H10 - BCD (lsb first) 10 Hours * 35 P2 - Hour Parity (even) * 36 - 39 D1 - BCD (lsb first) Days * 40 - 41 D10 - BCD (lsb first) 10 Days * 42 - 44 DW - BCD (lsb first) day of week (1: Monday -> 7: Sunday) * 45 - 49 MO - BCD (lsb first) Month * 50 MO0 - 10 Months * 51 - 53 Y1 - BCD (lsb first) Years * 54 - 57 Y10 - BCD (lsb first) 10 Years * 58 P3 - Date Parity (even) * 59 - usually missing (minute indication), except for leap insertion */ /*----------------------------------------------------------------------- * conversion table to map DCF77 bit stream into data fields. * Encoding: * Each field of the DCF77 code is described with two adjacent entries in * this table. The first entry specifies the offset into the DCF77 data stream * while the length is given as the difference between the start index and * the start index of the following field. */ static struct rawdcfcode { char offset; /* start bit */ } rawdcfcode[] = { { 0 }, { 15 }, { 16 }, { 17 }, { 19 }, { 20 }, { 21 }, { 25 }, { 28 }, { 29 }, { 33 }, { 35 }, { 36 }, { 40 }, { 42 }, { 45 }, { 49 }, { 50 }, { 54 }, { 58 }, { 59 } }; /*----------------------------------------------------------------------- * symbolic names for the fields of DCF77 describes in "rawdcfcode". * see comment above for the structure of the DCF77 data */ #define DCF_M 0 #define DCF_R 1 #define DCF_A1 2 #define DCF_Z 3 #define DCF_A2 4 #define DCF_S 5 #define DCF_M1 6 #define DCF_M10 7 #define DCF_P1 8 #define DCF_H1 9 #define DCF_H10 10 #define DCF_P2 11 #define DCF_D1 12 #define DCF_D10 13 #define DCF_DW 14 #define DCF_MO 15 #define DCF_MO0 16 #define DCF_Y1 17 #define DCF_Y10 18 #define DCF_P3 19 /*----------------------------------------------------------------------- * parity field table (same encoding as rawdcfcode) * This table describes the sections of the DCF77 code that are * parity protected */ static struct partab { char offset; /* start bit of parity field */ } partab[] = { { 21 }, { 29 }, { 36 }, { 59 } }; /*----------------------------------------------------------------------- * offsets for parity field descriptions */ #define DCF_P_P1 0 #define DCF_P_P2 1 #define DCF_P_P3 2 /*----------------------------------------------------------------------- * legal values for time zone information */ #define DCF_Z_MET 0x2 #define DCF_Z_MED 0x1 /*----------------------------------------------------------------------- * symbolic representation if the DCF77 data stream */ static struct dcfparam { unsigned char onebits[60]; unsigned char zerobits[60]; } dcfparam = { "###############RADMLS1248124P124812P1248121241248112481248P", /* 'ONE' representation */ "--------------------s-------p------p----------------------p" /* 'ZERO' representation */ }; /*----------------------------------------------------------------------- * extract a bitfield from DCF77 datastream * All numeric fields are LSB first. * buf holds a pointer to a DCF77 data buffer in symbolic * representation * idx holds the index to the field description in rawdcfcode */ static unsigned long ext_bf( register unsigned char *buf, register int idx ) { register unsigned long sum = 0; register int i, first; first = rawdcfcode[idx].offset; for (i = rawdcfcode[idx+1].offset - 1; i >= first; i--) { sum <<= 1; sum |= (buf[i] != dcfparam.zerobits[i]); } return sum; } /*----------------------------------------------------------------------- * check even parity integrity for a bitfield * * buf holds a pointer to a DCF77 data buffer in symbolic * representation * idx holds the index to the field description in partab */ static unsigned pcheck( register unsigned char *buf, register int idx ) { register int i,last; register unsigned psum = 1; last = partab[idx+1].offset; for (i = partab[idx].offset; i < last; i++) psum ^= (buf[i] != dcfparam.zerobits[i]); return psum; } /*----------------------------------------------------------------------- * convert a DCF77 data buffer into wall clock time + flags * * buffer holds a pointer to a DCF77 data buffer in symbolic * representation * size describes the length of DCF77 information in bits (represented * as chars in symbolic notation * clock points to a wall clock time description of the DCF77 data (result) */ static unsigned long convert_rawdcf( unsigned char *buffer, int size, clocktime_t *clock_time ) { if (size < 57) { PRINTF("%-30s", "*** INCOMPLETE"); return CVT_NONE; } /* * check Start and Parity bits */ if ((ext_bf(buffer, DCF_S) == 1) && pcheck(buffer, DCF_P_P1) && pcheck(buffer, DCF_P_P2) && pcheck(buffer, DCF_P_P3)) { /* * buffer OK - extract all fields and build wall clock time from them */ clock_time->flags = 0; clock_time->usecond= 0; clock_time->second = 0; clock_time->minute = ext_bf(buffer, DCF_M10); clock_time->minute = TIMES10(clock_time->minute) + ext_bf(buffer, DCF_M1); clock_time->hour = ext_bf(buffer, DCF_H10); clock_time->hour = TIMES10(clock_time->hour) + ext_bf(buffer, DCF_H1); clock_time->day = ext_bf(buffer, DCF_D10); clock_time->day = TIMES10(clock_time->day) + ext_bf(buffer, DCF_D1); clock_time->month = ext_bf(buffer, DCF_MO0); clock_time->month = TIMES10(clock_time->month) + ext_bf(buffer, DCF_MO); clock_time->year = ext_bf(buffer, DCF_Y10); clock_time->year = TIMES10(clock_time->year) + ext_bf(buffer, DCF_Y1); clock_time->wday = ext_bf(buffer, DCF_DW); /* * determine offset to UTC by examining the time zone */ switch (ext_bf(buffer, DCF_Z)) { case DCF_Z_MET: clock_time->utcoffset = -60; break; case DCF_Z_MED: clock_time->flags |= DCFB_DST; clock_time->utcoffset = -120; break; default: PRINTF("%-30s", "*** BAD TIME ZONE"); return CVT_FAIL|CVT_BADFMT; } /* * extract various warnings from DCF77 */ if (ext_bf(buffer, DCF_A1)) clock_time->flags |= DCFB_ANNOUNCE; if (ext_bf(buffer, DCF_A2)) clock_time->flags |= DCFB_LEAP; if (ext_bf(buffer, DCF_R)) clock_time->flags |= DCFB_CALLBIT; return CVT_OK; } else { /* * bad format - not for us */ PRINTF("%-30s", "*** BAD FORMAT (invalid/parity)"); return CVT_FAIL|CVT_BADFMT; } } /*----------------------------------------------------------------------- * raw dcf input routine - fix up 50 baud * characters for 1/0 decision */ static unsigned long cvt_rawdcf( unsigned char *buffer, int size, clocktime_t *clock_time ) { register unsigned char *s = buffer; register unsigned char *e = buffer + size; register unsigned char *b = dcfparam.onebits; register unsigned char *c = dcfparam.zerobits; register unsigned rtc = CVT_NONE; register unsigned int i, lowmax, highmax, cutoff, span; #define BITS 9 unsigned char histbuf[BITS]; /* * the input buffer contains characters with runs of consecutive * bits set. These set bits are an indication of the DCF77 pulse * length. We assume that we receive the pulse at 50 Baud. Thus * a 100ms pulse would generate a 4 bit train (20ms per bit and * start bit) * a 200ms pulse would create all zeroes (and probably a frame error) * * The basic idea is that on corret reception we must have two * maxima in the pulse length distribution histogram. (one for * the zero representing pulses and one for the one representing * pulses) * There will always be ones in the datastream, thus we have to see * two maxima. * The best point to cut for a 1/0 decision is the minimum between those * between the maxima. The following code tries to find this cutoff point. */ /* * clear histogram buffer */ for (i = 0; i < BITS; i++) { histbuf[i] = 0; } cutoff = 0; lowmax = 0; /* * convert sequences of set bits into bits counts updating * the histogram alongway */ while (s < e) { register unsigned int ch = *s ^ 0xFF; /* * check integrity and update histogramm */ if (!((ch+1) & ch) || !*s) { /* * character ok */ for (i = 0; ch; i++) { ch >>= 1; } *s = i; histbuf[i]++; cutoff += i; lowmax++; } else { /* * invalid character (no consecutive bit sequence) */ dprintf(("parse: cvt_rawdcf: character check for 0x%x@%ld FAILED\n", (u_int)*s, (long)(s - buffer))); *s = (unsigned char)~0; rtc = CVT_FAIL|CVT_BADFMT; } s++; } /* * first cutoff estimate (average bit count - must be between both * maxima) */ if (lowmax) { cutoff /= lowmax; } else { cutoff = 4; /* doesn't really matter - it'll fail anyway, but gives error output */ } dprintf(("parse: cvt_rawdcf: average bit count: %d\n", cutoff)); lowmax = 0; /* weighted sum */ highmax = 0; /* bitcount */ /* * collect weighted sum of lower bits (left of initial guess) */ dprintf(("parse: cvt_rawdcf: histogram:")); for (i = 0; i <= cutoff; i++) { lowmax += histbuf[i] * i; highmax += histbuf[i]; dprintf((" %d", histbuf[i])); } dprintf((" ")); /* * round up */ lowmax += highmax / 2; /* * calculate lower bit maximum (weighted sum / bit count) * * avoid divide by zero */ if (highmax) { lowmax /= highmax; } else { lowmax = 0; } highmax = 0; /* weighted sum of upper bits counts */ cutoff = 0; /* bitcount */ /* * collect weighted sum of lower bits (right of initial guess) */ for (; i < BITS; i++) { highmax+=histbuf[i] * i; cutoff +=histbuf[i]; dprintf((" %d", histbuf[i])); } dprintf(("\n")); /* * determine upper maximum (weighted sum / bit count) */ if (cutoff) { highmax /= cutoff; } else { highmax = BITS-1; } /* * following now holds: * lowmax <= cutoff(initial guess) <= highmax * best cutoff is the minimum nearest to higher bits */ /* * find the minimum between lowmax and highmax (detecting * possibly a minimum span) */ span = cutoff = lowmax; for (i = lowmax; i <= highmax; i++) { if (histbuf[cutoff] > histbuf[i]) { /* * got a new minimum move beginning of minimum (cutoff) and * end of minimum (span) there */ cutoff = span = i; } else if (histbuf[cutoff] == histbuf[i]) { /* * minimum not better yet - but it spans more than * one bit value - follow it */ span = i; } } /* * cutoff point for 1/0 decision is the middle of the minimum section * in the histogram */ cutoff = (cutoff + span) / 2; dprintf(("parse: cvt_rawdcf: lower maximum %d, higher maximum %d, cutoff %d\n", lowmax, highmax, cutoff)); /* * convert the bit counts to symbolic 1/0 information for data conversion */ s = buffer; while ((s < e) && *c && *b) { if (*s == (unsigned char)~0) { /* * invalid character */ *s = '?'; } else { /* * symbolic 1/0 representation */ *s = (*s >= cutoff) ? *b : *c; } s++; b++; c++; } /* * if everything went well so far return the result of the symbolic * conversion routine else just the accumulated errors */ if (rtc != CVT_NONE) { PRINTF("%-30s", "*** BAD DATA"); } return (rtc == CVT_NONE) ? convert_rawdcf(buffer, size, clock_time) : rtc; } /*----------------------------------------------------------------------- * convert a wall clock time description of DCF77 to a Unix time (seconds * since 1.1. 1970 UTC) */ static time_t dcf_to_unixtime( clocktime_t *clock_time, unsigned *cvtrtc ) { #define SETRTC(_X_) { if (cvtrtc) *cvtrtc = (_X_); } static int days_of_month[] = { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; register int i; time_t t; /* * map 2 digit years to 19xx (DCF77 is a 20th century item) */ if ( clock_time->year < YEAR_PIVOT ) /* in case of Y2KFixes [ */ clock_time->year += 100; /* *year%100, make tm_year */ /* *(do we need this?) */ if ( clock_time->year < YEAR_BREAK ) /* (failsafe if) */ clock_time->year += 1900; /* Y2KFixes ] */ /* * must have been a really bad year code - drop it */ if (clock_time->year < (YEAR_PIVOT + 1900) ) /* Y2KFixes */ { SETRTC(CVT_FAIL|CVT_BADDATE); return -1; } /* * sorry, slow section here - but it's not time critical anyway */ /* * calculate days since 1970 (watching leap years) */ t = julian0( clock_time->year ) - julian0( 1970 ); /* month */ if (clock_time->month <= 0 || clock_time->month > 12) { SETRTC(CVT_FAIL|CVT_BADDATE); return -1; /* bad month */ } /* adjust current leap year */ #if 0 if (clock_time->month < 3 && days_per_year(clock_time->year) == 366) t--; #endif /* * collect days from months excluding the current one */ for (i = 1; i < clock_time->month; i++) { t += days_of_month[i]; } /* day */ if (clock_time->day < 1 || ((clock_time->month == 2 && days_per_year(clock_time->year) == 366) ? clock_time->day > 29 : clock_time->day > days_of_month[clock_time->month])) { SETRTC(CVT_FAIL|CVT_BADDATE); return -1; /* bad day */ } /* * collect days from date excluding the current one */ t += clock_time->day - 1; /* hour */ if (clock_time->hour < 0 || clock_time->hour >= 24) { SETRTC(CVT_FAIL|CVT_BADTIME); return -1; /* bad hour */ } /* * calculate hours from 1. 1. 1970 */ t = TIMES24(t) + clock_time->hour; /* min */ if (clock_time->minute < 0 || clock_time->minute > 59) { SETRTC(CVT_FAIL|CVT_BADTIME); return -1; /* bad min */ } /* * calculate minutes from 1. 1. 1970 */ t = TIMES60(t) + clock_time->minute; /* sec */ /* * calculate UTC in minutes */ t += clock_time->utcoffset; if (clock_time->second < 0 || clock_time->second > 60) /* allow for LEAPs */ { SETRTC(CVT_FAIL|CVT_BADTIME); return -1; /* bad sec */ } /* * calculate UTC in seconds - phew ! */ t = TIMES60(t) + clock_time->second; /* done */ return t; } /*----------------------------------------------------------------------- * cheap half baked 1/0 decision - for interactive operation only */ static char type( unsigned int c ) { c ^= 0xFF; return (c > 0xF); } /*----------------------------------------------------------------------- * week day representation */ static const char *wday[8] = { "??", "Mo", "Tu", "We", "Th", "Fr", "Sa", "Su" }; /*----------------------------------------------------------------------- * generate a string representation for a timeval */ static char * pr_timeval( struct timeval *val ) { static char buf[20]; if (val->tv_sec == 0) snprintf(buf, sizeof(buf), "%c0.%06ld", (val->tv_usec < 0) ? '-' : '+', (long int)l_abs(val->tv_usec)); else snprintf(buf, sizeof(buf), "%ld.%06ld", (long int)val->tv_sec, (long int)l_abs(val->tv_usec)); return buf; } /*----------------------------------------------------------------------- * correct the current time by an offset by setting the time rigorously */ static void set_time( struct timeval *offset ) { struct timeval the_time; if (no_set) return; LPRINTF("set_time: %s ", pr_timeval(offset)); syslog(LOG_NOTICE, "setting time (offset %s)", pr_timeval(offset)); if (gettimeofday(&the_time, 0L) == -1) { perror("gettimeofday()"); } else { timeradd(&the_time, offset); if (settimeofday(&the_time, 0L) == -1) { perror("settimeofday()"); } } } /*----------------------------------------------------------------------- * slew the time by a given offset */ static void adj_time( long offset ) { struct timeval time_offset; if (no_set) return; time_offset.tv_sec = offset / 1000000; time_offset.tv_usec = offset % 1000000; LPRINTF("adj_time: %ld us ", (long int)offset); if (adjtime(&time_offset, 0L) == -1) perror("adjtime()"); } /*----------------------------------------------------------------------- * read in a possibly previously written drift value */ static void read_drift( const char *drift_file ) { FILE *df; df = fopen(drift_file, "r"); if (df != NULL) { int idrift = 0, fdrift = 0; fscanf(df, "%4d.%03d", &idrift, &fdrift); fclose(df); LPRINTF("read_drift: %d.%03d ppm ", idrift, fdrift); accum_drift = idrift << USECSCALE; fdrift = (fdrift << USECSCALE) / 1000; accum_drift += fdrift & (1< max_adj_offset_usec)) { /* * hopeless - set the clock - and clear the timing */ set_time(offset); clock_adjust = 0; skip_adjust = 1; return; } usecoffset = offset->tv_sec * 1000000 + offset->tv_usec; clock_adjust = R_SHIFT(usecoffset, TIMECONSTANT); /* adjustment to make for next period */ tmp = 0; while (adjustments > (1 << tmp)) tmp++; adjustments = 0; if (tmp > FREQ_WEIGHT) tmp = FREQ_WEIGHT; accum_drift += R_SHIFT(usecoffset << USECSCALE, TIMECONSTANT+TIMECONSTANT+FREQ_WEIGHT-tmp); if (accum_drift > MAX_DRIFT) /* clamp into interval */ accum_drift = MAX_DRIFT; else if (accum_drift < -MAX_DRIFT) accum_drift = -MAX_DRIFT; update_drift(drift_file, usecoffset, reftime); LPRINTF("clock_adjust: %s, clock_adjust %ld, drift_comp %ld(%ld) ", pr_timeval(offset),(long int) R_SHIFT(clock_adjust, USECSCALE), (long int)R_SHIFT(accum_drift, USECSCALE), (long int)accum_drift); } /*----------------------------------------------------------------------- * adjust the clock by a small mount to simulate frequency correction */ static void periodic_adjust( void ) { register long adjustment; adjustments++; adjustment = R_SHIFT(clock_adjust, PHASE_WEIGHT); clock_adjust -= adjustment; adjustment += R_SHIFT(accum_drift, USECSCALE+ADJINTERVAL); adj_time(adjustment); } /*----------------------------------------------------------------------- * control synchronisation status (warnings) and do periodic adjusts * (frequency control simulation) */ static void tick( int signum ) { static unsigned long last_notice = 0; #if !defined(HAVE_SIGACTION) && !defined(HAVE_SIGVEC) (void)signal(SIGALRM, tick); #endif periodic_adjust(); ticks += 1< MAX_UNSYNC) { /* * not getting time for a while */ if (sync_state == SYNC) { /* * completely lost information */ sync_state = NO_SYNC; syslog(LOG_INFO, "DCF77 reception lost (timeout)"); last_notice = ticks; } else /* * in NO_SYNC state - look whether its time to speak up again */ if ((ticks - last_notice) > NOTICE_INTERVAL) { syslog(LOG_NOTICE, "still not synchronized to DCF77 - check receiver/signal"); last_notice = ticks; } } #ifndef ITIMER_REAL (void) alarm(1< daemon operation) */ static void detach( void ) { # ifdef HAVE_DAEMON daemon(0, 0); # else /* not HAVE_DAEMON */ if (fork()) exit(0); { u_long s; int max_fd; #if defined(HAVE_SYSCONF) && defined(_SC_OPEN_MAX) max_fd = sysconf(_SC_OPEN_MAX); #else /* HAVE_SYSCONF && _SC_OPEN_MAX */ max_fd = getdtablesize(); #endif /* HAVE_SYSCONF && _SC_OPEN_MAX */ for (s = 0; s < max_fd; s++) (void) close((int)s); (void) open("/", 0); (void) dup2(0, 1); (void) dup2(0, 2); #ifdef SYS_DOMAINOS { uid_$t puid; status_$t st; proc2_$who_am_i(&puid); proc2_$make_server(&puid, &st); } #endif /* SYS_DOMAINOS */ #if defined(HAVE_SETPGID) || defined(HAVE_SETSID) # ifdef HAVE_SETSID if (setsid() == (pid_t)-1) syslog(LOG_ERR, "dcfd: setsid(): %m"); # else if (setpgid(0, 0) == -1) syslog(LOG_ERR, "dcfd: setpgid(): %m"); # endif #else /* HAVE_SETPGID || HAVE_SETSID */ { int fid; fid = open("/dev/tty", 2); if (fid >= 0) { (void) ioctl(fid, (u_long) TIOCNOTTY, (char *) 0); (void) close(fid); } # ifdef HAVE_SETPGRP_0 (void) setpgrp(); # else /* HAVE_SETPGRP_0 */ (void) setpgrp(0, getpid()); # endif /* HAVE_SETPGRP_0 */ } #endif /* HAVE_SETPGID || HAVE_SETSID */ } #endif /* not HAVE_DAEMON */ } /*----------------------------------------------------------------------- * list possible arguments and options */ static void usage( char *program ) { fprintf(stderr, "usage: %s [-n] [-f] [-l] [-t] [-i] [-o] [-d ] [-D ] \n", program); fprintf(stderr, "\t-n do not change time\n"); fprintf(stderr, "\t-i interactive\n"); fprintf(stderr, "\t-t trace (print all datagrams)\n"); fprintf(stderr, "\t-f print all databits (includes PTB private data)\n"); fprintf(stderr, "\t-l print loop filter debug information\n"); fprintf(stderr, "\t-o print offet average for current minute\n"); fprintf(stderr, "\t-Y make internal Y2K checks then exit\n"); /* Y2KFixes */ fprintf(stderr, "\t-d specify alternate drift file\n"); fprintf(stderr, "\t-D specify delay from input edge to processing in micro seconds\n"); } /*----------------------------------------------------------------------- * check_y2k() - internal check of Y2K logic * (a lot of this logic lifted from ../ntpd/check_y2k.c) */ static int check_y2k( void ) { int year; /* current working year */ int year0 = 1900; /* sarting year for NTP time */ int yearend; /* ending year we test for NTP time. * 32-bit systems: through 2036, the **year in which NTP time overflows. * 64-bit systems: a reasonable upper **limit (well, maybe somewhat beyond **reasonable, but well before the **max time, by which time the earth **will be dead.) */ time_t Time; struct tm LocalTime; int Fatals, Warnings; #define Error(year) if ( (year)>=2036 && LocalTime.tm_year < 110 ) \ Warnings++; else Fatals++ Fatals = Warnings = 0; Time = time( (time_t *)NULL ); LocalTime = *localtime( &Time ); year = ( sizeof( u_long ) > 4 ) /* save max span using year as temp */ ? ( 400 * 3 ) /* three greater gregorian cycles */ : ((int)(0x7FFFFFFF / 365.242 / 24/60/60)* 2 ); /*32-bit limit*/ /* NOTE: will automacially expand test years on * 64 bit machines.... this may cause some of the * existing ntp logic to fail for years beyond * 2036 (the current 32-bit limit). If all checks * fail ONLY beyond year 2036 you may ignore such * errors, at least for a decade or so. */ yearend = year0 + year; year = 1900+YEAR_PIVOT; printf( " starting year %04d\n", (int) year ); printf( " ending year %04d\n", (int) yearend ); for ( ; year < yearend; year++ ) { clocktime_t ct; time_t Observed; time_t Expected; unsigned Flag; unsigned long t; ct.day = 1; ct.month = 1; ct.year = year; ct.hour = ct.minute = ct.second = ct.usecond = 0; ct.utcoffset = 0; ct.flags = 0; Flag = 0; Observed = dcf_to_unixtime( &ct, &Flag ); /* seems to be a clone of parse_to_unixtime() with * *a minor difference to arg2 type */ if ( ct.year != year ) { fprintf( stdout, "%04d: dcf_to_unixtime(,%d) CORRUPTED ct.year: was %d\n", (int)year, (int)Flag, (int)ct.year ); Error(year); break; } t = julian0(year) - julian0(1970); /* Julian day from 1970 */ Expected = t * 24 * 60 * 60; if ( Observed != Expected || Flag ) { /* time difference */ fprintf( stdout, "%04d: dcf_to_unixtime(,%d) FAILURE: was=%lu s/b=%lu (%ld)\n", year, (int)Flag, (unsigned long)Observed, (unsigned long)Expected, ((long)Observed - (long)Expected) ); Error(year); break; } } return ( Fatals ); } /*-------------------------------------------------- * rawdcf_init - set up modem lines for RAWDCF receivers */ #if defined(TIOCMSET) && (defined(TIOCM_DTR) || defined(CIOCM_DTR)) static void rawdcf_init( int fd ) { /* * You can use the RS232 to supply the power for a DCF77 receiver. * Here a voltage between the DTR and the RTS line is used. Unfortunately * the name has changed from CIOCM_DTR to TIOCM_DTR recently. */ #ifdef TIOCM_DTR int sl232 = TIOCM_DTR; /* turn on DTR for power supply */ #else int sl232 = CIOCM_DTR; /* turn on DTR for power supply */ #endif if (ioctl(fd, TIOCMSET, (caddr_t)&sl232) == -1) { syslog(LOG_NOTICE, "rawdcf_init: WARNING: ioctl(fd, TIOCMSET, [C|T]IOCM_DTR): %m"); } } #else static void rawdcf_init( int fd ) { syslog(LOG_NOTICE, "rawdcf_init: WARNING: OS interface incapable of setting DTR to power DCF modules"); } #endif /* DTR initialisation type */ /*----------------------------------------------------------------------- * main loop - argument interpreter / setup / main loop */ int main( int argc, char **argv ) { unsigned char c; char **a = argv; int ac = argc; char *file = NULL; const char *drift_file = "/etc/dcfd.drift"; int fd; int offset = 15; int offsets = 0; int delay = DEFAULT_DELAY; /* average delay from input edge to time stamping */ int trace = 0; int errs = 0; /* * process arguments */ while (--ac) { char *arg = *++a; if (*arg == '-') while ((c = *++arg)) switch (c) { case 't': trace = 1; interactive = 1; break; case 'f': offset = 0; interactive = 1; break; case 'l': loop_filter_debug = 1; offsets = 1; interactive = 1; break; case 'n': no_set = 1; break; case 'o': offsets = 1; interactive = 1; break; case 'i': interactive = 1; break; case 'D': if (ac > 1) { delay = atoi(*++a); ac--; } else { fprintf(stderr, "%s: -D requires integer argument\n", argv[0]); errs=1; } break; case 'd': if (ac > 1) { drift_file = *++a; ac--; } else { fprintf(stderr, "%s: -d requires file name argument\n", argv[0]); errs=1; } break; case 'Y': errs=check_y2k(); exit( errs ? 1 : 0 ); default: fprintf(stderr, "%s: unknown option -%c\n", argv[0], c); errs=1; break; } else if (file == NULL) file = arg; else { fprintf(stderr, "%s: device specified twice\n", argv[0]); errs=1; } } if (errs) { usage(argv[0]); exit(1); } else if (file == NULL) { fprintf(stderr, "%s: device not specified\n", argv[0]); usage(argv[0]); exit(1); } errs = LINES+1; /* * get access to DCF77 tty port */ fd = open(file, O_RDONLY); if (fd == -1) { perror(file); exit(1); } else { int i, rrc; struct timeval t, tt, tlast; struct timeval timeout; struct timeval phase; struct timeval time_offset; char pbuf[61]; /* printable version */ char buf[61]; /* raw data */ clocktime_t clock_time; /* wall clock time */ time_t utc_time = 0; time_t last_utc_time = 0; long usecerror = 0; long lasterror = 0; #if defined(HAVE_TERMIOS_H) || defined(STREAM) struct termios term; #else /* not HAVE_TERMIOS_H || STREAM */ # if defined(HAVE_TERMIO_H) || defined(HAVE_SYSV_TTYS) struct termio term; # endif/* HAVE_TERMIO_H || HAVE_SYSV_TTYS */ #endif /* not HAVE_TERMIOS_H || STREAM */ unsigned int rtc = CVT_NONE; rawdcf_init(fd); timeout.tv_sec = 1; timeout.tv_usec = 500000; phase.tv_sec = 0; phase.tv_usec = delay; /* * setup TTY (50 Baud, Read, 8Bit, No Hangup, 1 character IO) */ if (TTY_GETATTR(fd, &term) == -1) { perror("tcgetattr"); exit(1); } memset(term.c_cc, 0, sizeof(term.c_cc)); term.c_cc[VMIN] = 1; #ifdef NO_PARENB_IGNPAR term.c_cflag = CS8|CREAD|CLOCAL; #else term.c_cflag = CS8|CREAD|CLOCAL|PARENB; #endif term.c_iflag = IGNPAR; term.c_oflag = 0; term.c_lflag = 0; cfsetispeed(&term, B50); cfsetospeed(&term, B50); if (TTY_SETATTR(fd, &term) == -1) { perror("tcsetattr"); exit(1); } /* * lose terminal if in daemon operation */ if (!interactive) detach(); /* * get syslog() initialized */ #ifdef LOG_DAEMON openlog("dcfd", LOG_PID, LOG_DAEMON); #else openlog("dcfd", LOG_PID); #endif /* * setup periodic operations (state control / frequency control) */ #ifdef HAVE_SIGACTION { struct sigaction act; # ifdef HAVE_SA_SIGACTION_IN_STRUCT_SIGACTION act.sa_sigaction = (void (*) (int, siginfo_t *, void *))0; # endif /* HAVE_SA_SIGACTION_IN_STRUCT_SIGACTION */ act.sa_handler = tick; sigemptyset(&act.sa_mask); act.sa_flags = 0; if (sigaction(SIGALRM, &act, (struct sigaction *)0) == -1) { syslog(LOG_ERR, "sigaction(SIGALRM): %m"); exit(1); } } #else #ifdef HAVE_SIGVEC { struct sigvec vec; vec.sv_handler = tick; vec.sv_mask = 0; vec.sv_flags = 0; if (sigvec(SIGALRM, &vec, (struct sigvec *)0) == -1) { syslog(LOG_ERR, "sigvec(SIGALRM): %m"); exit(1); } } #else (void) signal(SIGALRM, tick); #endif #endif #ifdef ITIMER_REAL { struct itimerval it; it.it_interval.tv_sec = 1< LINES) { PRINTF(" %s", &"PTB private....RADMLSMin....PHour..PMDay..DayMonthYear....P\n"[offset]); PRINTF(" %s", &"---------------RADMLS1248124P124812P1248121241248112481248P\n"[offset]); errs = 0; } /* * timeout -> possible minute mark -> interpretation */ if (timercmp(&t, &timeout, >)) { PRINTF("%c %.*s ", pat[i % (sizeof(pat)-1)], 59 - offset, &pbuf[offset]); if ((rtc = cvt_rawdcf((unsigned char *)buf, i, &clock_time)) != CVT_OK) { /* * this data was bad - well - forget synchronisation for now */ PRINTF("\n"); if (sync_state == SYNC) { sync_state = NO_SYNC; syslog(LOG_INFO, "DCF77 reception lost (bad data)"); } errs++; } else if (trace) { PRINTF("\r %.*s ", 59 - offset, &buf[offset]); } buf[0] = c; /* * collect first character */ if (((c^0xFF)+1) & (c^0xFF)) pbuf[0] = '?'; else pbuf[0] = type(c) ? '#' : '-'; for ( i = 1; i < 60; i++) pbuf[i] = '.'; i = 0; } else { /* * collect character */ buf[i] = c; /* * initial guess (usually correct) */ if (((c^0xFF)+1) & (c^0xFF)) pbuf[i] = '?'; else pbuf[i] = type(c) ? '#' : '-'; PRINTF("%c %.*s ", pat[i % (sizeof(pat)-1)], 59 - offset, &pbuf[offset]); } if (i == 0 && rtc == CVT_OK) { /* * we got a good time code here - try to convert it to * UTC */ if ((utc_time = dcf_to_unixtime(&clock_time, &rtc)) == -1) { PRINTF("*** BAD CONVERSION\n"); } if (utc_time != (last_utc_time + 60)) { /* * well, two successive sucessful telegrams are not 60 seconds * apart */ PRINTF("*** NO MINUTE INC\n"); if (sync_state == SYNC) { sync_state = NO_SYNC; syslog(LOG_INFO, "DCF77 reception lost (data mismatch)"); } errs++; rtc = CVT_FAIL|CVT_BADTIME|CVT_BADDATE; } else usecerror = 0; last_utc_time = utc_time; } if (rtc == CVT_OK) { if (i == 0) { /* * valid time code - determine offset and * note regained reception */ last_sync = ticks; if (sync_state == NO_SYNC) { syslog(LOG_INFO, "receiving DCF77"); } else { /* * we had at least one minute SYNC - thus * last error is valid */ time_offset.tv_sec = lasterror / 1000000; time_offset.tv_usec = lasterror % 1000000; adjust_clock(&time_offset, drift_file, utc_time); } sync_state = SYNC; } time_offset.tv_sec = utc_time + i; time_offset.tv_usec = 0; timeradd(&time_offset, &phase); usecerror += (time_offset.tv_sec - tt.tv_sec) * 1000000 + time_offset.tv_usec -tt.tv_usec; /* * output interpreted DCF77 data */ PRINTF(offsets ? "%s, %2ld:%02ld:%02d, %ld.%02ld.%02ld, <%s%s%s%s> (%c%ld.%06lds)" : "%s, %2ld:%02ld:%02d, %ld.%02ld.%02ld, <%s%s%s%s>", wday[clock_time.wday], clock_time.hour, clock_time.minute, i, clock_time.day, clock_time.month, clock_time.year, (clock_time.flags & DCFB_CALLBIT) ? "R" : "_", (clock_time.flags & DCFB_ANNOUNCE) ? "A" : "_", (clock_time.flags & DCFB_DST) ? "D" : "_", (clock_time.flags & DCFB_LEAP) ? "L" : "_", (lasterror < 0) ? '-' : '+', l_abs(lasterror) / 1000000, l_abs(lasterror) % 1000000 ); if (trace && (i == 0)) { PRINTF("\n"); errs++; } lasterror = usecerror / (i+1); } else { lasterror = 0; /* we cannot calculate phase errors on bad reception */ } PRINTF("\r"); if (i < 60) { i++; } tlast = tt; if (interactive) fflush(stdout); } } while ((rrc == -1) && (errno == EINTR)); /* * lost IO - sorry guys */ syslog(LOG_ERR, "TERMINATING - cannot read from device %s (%m)", file); (void)close(fd); } closelog(); return 0; } /* * History: * * dcfd.c,v * Revision 4.18 2005/10/07 22:08:18 kardel * make dcfd.c compile on NetBSD 3.99.9 again (configure/sigvec compatibility fix) * * Revision 4.17.2.1 2005/10/03 19:15:16 kardel * work around configure not detecting a missing sigvec compatibility * interface on NetBSD 3.99.9 and above * * Revision 4.17 2005/08/10 10:09:44 kardel * output revision information * * Revision 4.16 2005/08/10 06:33:25 kardel * cleanup warnings * * Revision 4.15 2005/08/10 06:28:45 kardel * fix setting of baud rate * * Revision 4.14 2005/04/16 17:32:10 kardel * update copyright * * Revision 4.13 2004/11/14 15:29:41 kardel * support PPSAPI, upgrade Copyright to Berkeley style * */