/* * /src/NTP/REPOSITORY/ntp4-dev/ntpd/refclock_parse.c,v 4.81 2009/05/01 10:15:29 kardel RELEASE_20090105_A * * refclock_parse.c,v 4.81 2009/05/01 10:15:29 kardel RELEASE_20090105_A * * generic reference clock driver for several DCF/GPS/MSF/... receivers * * PPS notes: * On systems that support PPSAPI (RFC2783) PPSAPI is the * preferred interface. * * Optionally make use of a STREAMS module for input processing where * available and configured. This STREAMS module reduces the time * stamp latency for serial and PPS events. * Currently the STREAMS module is only available for Suns running * SunOS 4.x and SunOS5.x. * * Copyright (c) 1995-2015 by Frank Kardel ntp.org> * Copyright (c) 1989-1994 by Frank Kardel, Friedrich-Alexander Universitaet Erlangen-Nuernberg, Germany * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #ifdef HAVE_CONFIG_H # include "config.h" #endif #include "ntp_types.h" #if defined(REFCLOCK) && defined(CLOCK_PARSE) /* * This driver currently provides the support for * - Meinberg receiver DCF77 PZF535 (TCXO version) (DCF) * - Meinberg receiver DCF77 PZF535 (OCXO version) (DCF) * - Meinberg receiver DCF77 PZF509 (DCF) * - Meinberg receiver DCF77 AM receivers (e.g. C51) (DCF) * - IGEL CLOCK (DCF) * - ELV DCF7000 (DCF) * - Schmid clock (DCF) * - Conrad DCF77 receiver module (DCF) * - FAU DCF77 NTP receiver (TimeBrick) (DCF) * - WHARTON 400A Series clock (DCF) * * - Meinberg GPS receivers (GPS) * - Trimble (TSIP and TAIP protocol) (GPS) * * - RCC8000 MSF Receiver (MSF) * - VARITEXT clock (MSF) */ /* * Meinberg receivers are usually connected via a * 9600/7E1 or 19200/8N1 serial line. * * The Meinberg GPS receivers also have a special NTP time stamp * format. The firmware release is Uni-Erlangen. * * Meinberg generic receiver setup: * output time code every second * Baud rate 9600 7E2S * * Meinberg GPS receiver setup: * output time code every second * Baudrate 19200 8N1 * * This software supports the standard data formats used * in Meinberg receivers. * * Special software versions are only sensible for the * oldest GPS receiver, GPS16x. For newer receiver types * the output string format can be configured at the device, * and the device name is generally GPSxxx instead of GPS16x. * * Meinberg can be reached via: http://www.meinberg.de/ */ #include "ntpd.h" #include "ntp_refclock.h" #include "timevalops.h" /* includes */ #include "ntp_control.h" #include "ntp_string.h" #include #include #ifndef TM_IN_SYS_TIME # include #endif #ifdef HAVE_UNISTD_H # include #endif #if !defined(STREAM) && !defined(HAVE_SYSV_TTYS) && !defined(HAVE_BSD_TTYS) && !defined(HAVE_TERMIOS) # include "Bletch: Define one of {STREAM,HAVE_SYSV_TTYS,HAVE_TERMIOS}" #endif #ifdef STREAM # include # include #endif #ifdef HAVE_TERMIOS # include # define TTY_GETATTR(_FD_, _ARG_) tcgetattr((_FD_), (_ARG_)) # define TTY_SETATTR(_FD_, _ARG_) tcsetattr((_FD_), TCSANOW, (_ARG_)) # undef HAVE_SYSV_TTYS #endif #ifdef HAVE_SYSV_TTYS # define TTY_GETATTR(_FD_, _ARG_) ioctl((_FD_), TCGETA, (_ARG_)) # define TTY_SETATTR(_FD_, _ARG_) ioctl((_FD_), TCSETAW, (_ARG_)) #endif #ifdef HAVE_BSD_TTYS /* #error CURRENTLY NO BSD TTY SUPPORT */ # include "Bletch: BSD TTY not currently supported" #endif #ifdef HAVE_SYS_IOCTL_H # include #endif #ifdef HAVE_PPSAPI # include "ppsapi_timepps.h" # include "refclock_atom.h" #endif #ifdef PPS # ifdef HAVE_SYS_PPSCLOCK_H # include # endif # ifdef HAVE_TIO_SERIAL_STUFF # include # endif #endif # define BUFFER_SIZE(_BUF, _PTR) ((int)((_BUF) + sizeof(_BUF) - (_PTR))) # define BUFFER_SIZES(_BUF, _PTR, _SZ) ((int)((_BUF) + (_SZ) - (_PTR))) /* * document type of PPS interfacing - copy of ifdef mechanism in local_input() */ #undef PPS_METHOD #ifdef HAVE_PPSAPI #define PPS_METHOD "PPS API" #else #ifdef TIOCDCDTIMESTAMP #define PPS_METHOD "TIOCDCDTIMESTAMP" #else /* TIOCDCDTIMESTAMP */ #if defined(HAVE_STRUCT_PPSCLOCKEV) && (defined(HAVE_CIOGETEV) || defined(HAVE_TIOCGPPSEV)) #ifdef HAVE_CIOGETEV #define PPS_METHOD "CIOGETEV" #endif #ifdef HAVE_TIOCGPPSEV #define PPS_METHOD "TIOCGPPSEV" #endif #endif #endif /* TIOCDCDTIMESTAMP */ #endif /* HAVE_PPSAPI */ /* * COND_DEF can be conditionally defined as DEF or 0. If defined as DEF * then some more parse-specific variables are flagged to be printed with * "ntpq -c cv ". This can be lengthy, so by default COND_DEF * should be defined as 0. */ #if 0 # define COND_DEF DEF // enable this for testing #else # define COND_DEF 0 // enable this by default #endif #include "ntp_io.h" #include "ntp_stdlib.h" #include "parse.h" #include "mbg_gps166.h" #include "trimble.h" #include "binio.h" #include "ascii.h" #include "ieee754io.h" #include "recvbuff.h" static char rcsid[] = "refclock_parse.c,v 4.81 2009/05/01 10:15:29 kardel RELEASE_20090105_A+POWERUPTRUST"; /**=========================================================================== ** external interface to ntp mechanism **/ static int parse_start (int, struct peer *); static void parse_shutdown (int, struct peer *); static void parse_poll (int, struct peer *); static void parse_control (int, const struct refclockstat *, struct refclockstat *, struct peer *); struct refclock refclock_parse = { parse_start, parse_shutdown, parse_poll, parse_control, noentry, noentry, NOFLAGS }; /* * Definitions */ #define MAXUNITS 4 /* maximum number of "PARSE" units permitted */ #define PARSEDEVICE "/dev/refclock-%d" /* device to open %d is unit number */ #define PARSEPPSDEVICE "/dev/refclockpps-%d" /* optional pps device to open %d is unit number */ #undef ABS #define ABS(_X_) (((_X_) < 0) ? -(_X_) : (_X_)) #define PARSE_HARDPPS_DISABLE 0 #define PARSE_HARDPPS_ENABLE 1 /**=========================================================================== ** function vector for dynamically binding io handling mechanism **/ struct parseunit; /* to keep inquiring minds happy */ typedef struct bind { const char *bd_description; /* name of type of binding */ int (*bd_init) (struct parseunit *); /* initialize */ void (*bd_end) (struct parseunit *); /* end */ int (*bd_setcs) (struct parseunit *, parsectl_t *); /* set character size */ int (*bd_disable) (struct parseunit *); /* disable */ int (*bd_enable) (struct parseunit *); /* enable */ int (*bd_getfmt) (struct parseunit *, parsectl_t *); /* get format */ int (*bd_setfmt) (struct parseunit *, parsectl_t *); /* setfmt */ int (*bd_timecode) (struct parseunit *, parsectl_t *); /* get time code */ void (*bd_receive) (struct recvbuf *); /* receive operation */ int (*bd_io_input) (struct recvbuf *); /* input operation */ } bind_t; #define PARSE_END(_X_) (*(_X_)->binding->bd_end)(_X_) #define PARSE_SETCS(_X_, _CS_) (*(_X_)->binding->bd_setcs)(_X_, _CS_) #define PARSE_ENABLE(_X_) (*(_X_)->binding->bd_enable)(_X_) #define PARSE_DISABLE(_X_) (*(_X_)->binding->bd_disable)(_X_) #define PARSE_GETFMT(_X_, _DCT_) (*(_X_)->binding->bd_getfmt)(_X_, _DCT_) #define PARSE_SETFMT(_X_, _DCT_) (*(_X_)->binding->bd_setfmt)(_X_, _DCT_) #define PARSE_GETTIMECODE(_X_, _DCT_) (*(_X_)->binding->bd_timecode)(_X_, _DCT_) /* * special handling flags */ #define PARSE_F_PPSONSECOND 0x00000001 /* PPS pulses are on second */ #define PARSE_F_POWERUPTRUST 0x00000100 /* POWERUP state ist trusted for */ /* trusttime after SYNC was seen */ /**=========================================================================== ** error message regression handling ** ** there are quite a few errors that can occur in rapid succession such as ** noisy input data or no data at all. in order to reduce the amount of ** syslog messages in such case, we are using a backoff algorithm. We limit ** the number of error messages of a certain class to 1 per time unit. if a ** configurable number of messages is displayed that way, we move on to the ** next time unit / count for that class. a count of messages that have been ** suppressed is held and displayed whenever a corresponding message is ** displayed. the time units for a message class will also be displayed. ** whenever an error condition clears we reset the error message state, ** thus we would still generate much output on pathological conditions ** where the system oscillates between OK and NOT OK states. coping ** with that condition is currently considered too complicated. **/ #define ERR_ALL (unsigned)~0 /* "all" errors */ #define ERR_BADDATA (unsigned)0 /* unusable input data/conversion errors */ #define ERR_NODATA (unsigned)1 /* no input data */ #define ERR_BADIO (unsigned)2 /* read/write/select errors */ #define ERR_BADSTATUS (unsigned)3 /* unsync states */ #define ERR_BADEVENT (unsigned)4 /* non nominal events */ #define ERR_INTERNAL (unsigned)5 /* internal error */ #define ERR_CNT (unsigned)(ERR_INTERNAL+1) #define ERR(_X_) if (list_err(parse, (_X_))) struct errorregression { u_long err_count; /* number of repititions per class */ u_long err_delay; /* minimum delay between messages */ }; static struct errorregression err_baddata[] = /* error messages for bad input data */ { { 1, 0 }, /* output first message immediately */ { 5, 60 }, /* output next five messages in 60 second intervals */ { 3, 3600 }, /* output next 3 messages in hour intervals */ { 0, 12*3600 } /* repeat messages only every 12 hours */ }; static struct errorregression err_nodata[] = /* error messages for missing input data */ { { 1, 0 }, /* output first message immediately */ { 5, 60 }, /* output next five messages in 60 second intervals */ { 3, 3600 }, /* output next 3 messages in hour intervals */ { 0, 12*3600 } /* repeat messages only every 12 hours */ }; static struct errorregression err_badstatus[] = /* unsynchronized state messages */ { { 1, 0 }, /* output first message immediately */ { 5, 60 }, /* output next five messages in 60 second intervals */ { 3, 3600 }, /* output next 3 messages in hour intervals */ { 0, 12*3600 } /* repeat messages only every 12 hours */ }; static struct errorregression err_badio[] = /* io failures (bad reads, selects, ...) */ { { 1, 0 }, /* output first message immediately */ { 5, 60 }, /* output next five messages in 60 second intervals */ { 5, 3600 }, /* output next 3 messages in hour intervals */ { 0, 12*3600 } /* repeat messages only every 12 hours */ }; static struct errorregression err_badevent[] = /* non nominal events */ { { 20, 0 }, /* output first message immediately */ { 6, 60 }, /* output next five messages in 60 second intervals */ { 5, 3600 }, /* output next 3 messages in hour intervals */ { 0, 12*3600 } /* repeat messages only every 12 hours */ }; static struct errorregression err_internal[] = /* really bad things - basically coding/OS errors */ { { 0, 0 }, /* output all messages immediately */ }; static struct errorregression * err_tbl[] = { err_baddata, err_nodata, err_badio, err_badstatus, err_badevent, err_internal }; struct errorinfo { u_long err_started; /* begin time (ntp) of error condition */ u_long err_last; /* last time (ntp) error occurred */ u_long err_cnt; /* number of error repititions */ u_long err_suppressed; /* number of suppressed messages */ struct errorregression *err_stage; /* current error stage */ }; /**=========================================================================== ** refclock instance data **/ struct parseunit { /* * NTP management */ struct peer *peer; /* backlink to peer structure - refclock inactive if 0 */ struct refclockproc *generic; /* backlink to refclockproc structure */ /* * PARSE io */ bind_t *binding; /* io handling binding */ /* * parse state */ parse_t parseio; /* io handling structure (user level parsing) */ /* * type specific parameters */ struct parse_clockinfo *parse_type; /* link to clock description */ /* * clock state handling/reporting */ u_char flags; /* flags (leap_control) */ u_long lastchange; /* time (ntp) when last state change accured */ u_long statetime[CEVNT_MAX+1]; /* accumulated time of clock states */ u_long pollneeddata; /* current_time(!=0) for receive sample expected in PPS mode */ u_short lastformat; /* last format used */ u_long lastsync; /* time (ntp) when clock was last seen fully synchronized */ u_long maxunsync; /* max time in seconds a receiver is trusted after loosing synchronisation */ double ppsphaseadjust; /* phase adjustment of PPS time stamp */ u_long lastmissed; /* time (ntp) when poll didn't get data (powerup heuristic) */ u_long ppsserial; /* magic cookie for ppsclock serials (avoids stale ppsclock data) */ int ppsfd; /* fd to ise for PPS io */ #ifdef HAVE_PPSAPI int hardppsstate; /* current hard pps state */ struct refclock_atom atom; /* PPSAPI structure */ #endif parsetime_t timedata; /* last (parse module) data */ void *localdata; /* optional local, receiver-specific data */ unsigned long localstate; /* private local state */ struct errorinfo errors[ERR_CNT]; /* error state table for suppressing excessive error messages */ struct ctl_var *kv; /* additional pseudo variables */ u_long laststatistic; /* time when staticstics where output */ }; /**=========================================================================== ** Clockinfo section all parameter for specific clock types ** includes NTP parameters, TTY parameters and IO handling parameters **/ static void poll_dpoll (struct parseunit *); static void poll_poll (struct peer *); static int poll_init (struct parseunit *); typedef struct poll_info { u_long rate; /* poll rate - once every "rate" seconds - 0 off */ const char *string; /* string to send for polling */ u_long count; /* number of characters in string */ } poll_info_t; #define NO_CL_FLAGS 0 #define NO_POLL 0 #define NO_INIT 0 #define NO_END 0 #define NO_EVENT 0 #define NO_LCLDATA 0 #define NO_MESSAGE 0 #define NO_PPSDELAY 0 #define DCF_ID "DCF" /* generic DCF */ #define DCF_A_ID "DCFa" /* AM demodulation */ #define DCF_P_ID "DCFp" /* psuedo random phase shift */ #define GPS_ID "GPS" /* GPS receiver */ #define NOCLOCK_ROOTDELAY 0.0 #define NOCLOCK_BASEDELAY 0.0 #define NOCLOCK_DESCRIPTION 0 #define NOCLOCK_MAXUNSYNC 0 #define NOCLOCK_CFLAG 0 #define NOCLOCK_IFLAG 0 #define NOCLOCK_OFLAG 0 #define NOCLOCK_LFLAG 0 #define NOCLOCK_ID "TILT" #define NOCLOCK_POLL NO_POLL #define NOCLOCK_INIT NO_INIT #define NOCLOCK_END NO_END #define NOCLOCK_DATA NO_LCLDATA #define NOCLOCK_FORMAT "" #define NOCLOCK_TYPE CTL_SST_TS_UNSPEC #define NOCLOCK_SAMPLES 0 #define NOCLOCK_KEEP 0 #define DCF_TYPE CTL_SST_TS_LF #define GPS_TYPE CTL_SST_TS_UHF /* * receiver specific constants */ #define MBG_SPEED (B9600) #define MBG_CFLAG (CS7|PARENB|CREAD|CLOCAL|HUPCL|CSTOPB) #define MBG_IFLAG (IGNBRK|IGNPAR|ISTRIP) #define MBG_OFLAG 0 #define MBG_LFLAG 0 #define MBG_FLAGS PARSE_F_PPSONSECOND /* * Meinberg DCF77 receivers */ #define DCFUA31_ROOTDELAY 0.0 /* 0 */ #define DCFUA31_BASEDELAY 0.010 /* 10.7421875ms: 10 ms (+/- 3 ms) */ #define DCFUA31_DESCRIPTION "Meinberg DCF77 C51 or compatible" #define DCFUA31_MAXUNSYNC 60*30 /* only trust clock for 1/2 hour */ #define DCFUA31_SPEED MBG_SPEED #define DCFUA31_CFLAG MBG_CFLAG #define DCFUA31_IFLAG MBG_IFLAG #define DCFUA31_OFLAG MBG_OFLAG #define DCFUA31_LFLAG MBG_LFLAG #define DCFUA31_SAMPLES 5 #define DCFUA31_KEEP 3 #define DCFUA31_FORMAT "Meinberg Standard" /* * Meinberg DCF PZF535/TCXO (FM/PZF) receiver */ #define DCFPZF535_ROOTDELAY 0.0 #define DCFPZF535_BASEDELAY 0.001968 /* 1.968ms +- 104us (oscilloscope) - relative to start (end of STX) */ #define DCFPZF535_DESCRIPTION "Meinberg DCF PZF 535/509 / TCXO" #define DCFPZF535_MAXUNSYNC 60*60*12 /* only trust clock for 12 hours * @ 5e-8df/f we have accumulated * at most 2.16 ms (thus we move to * NTP synchronisation */ #define DCFPZF535_SPEED MBG_SPEED #define DCFPZF535_CFLAG MBG_CFLAG #define DCFPZF535_IFLAG MBG_IFLAG #define DCFPZF535_OFLAG MBG_OFLAG #define DCFPZF535_LFLAG MBG_LFLAG #define DCFPZF535_SAMPLES 5 #define DCFPZF535_KEEP 3 #define DCFPZF535_FORMAT "Meinberg Standard" /* * Meinberg DCF PZF535/OCXO receiver */ #define DCFPZF535OCXO_ROOTDELAY 0.0 #define DCFPZF535OCXO_BASEDELAY 0.001968 /* 1.968ms +- 104us (oscilloscope) - relative to start (end of STX) */ #define DCFPZF535OCXO_DESCRIPTION "Meinberg DCF PZF 535/509 / OCXO" #define DCFPZF535OCXO_MAXUNSYNC 60*60*96 /* only trust clock for 4 days * @ 5e-9df/f we have accumulated * at most an error of 1.73 ms * (thus we move to NTP synchronisation) */ #define DCFPZF535OCXO_SPEED MBG_SPEED #define DCFPZF535OCXO_CFLAG MBG_CFLAG #define DCFPZF535OCXO_IFLAG MBG_IFLAG #define DCFPZF535OCXO_OFLAG MBG_OFLAG #define DCFPZF535OCXO_LFLAG MBG_LFLAG #define DCFPZF535OCXO_SAMPLES 5 #define DCFPZF535OCXO_KEEP 3 #define DCFPZF535OCXO_FORMAT "Meinberg Standard" /* * Meinberg GPS receivers */ static void gps16x_message (struct parseunit *, parsetime_t *); static int gps16x_poll_init (struct parseunit *); #define GPS16X_ROOTDELAY 0.0 /* nothing here */ #define GPS16X_BASEDELAY 0.001968 /* XXX to be fixed ! 1.968ms +- 104us (oscilloscope) - relative to start (end of STX) */ #define GPS16X_DESCRIPTION "Meinberg GPS receiver" #define GPS16X_MAXUNSYNC 60*60*96 /* only trust clock for 4 days * @ 5e-9df/f we have accumulated * at most an error of 1.73 ms * (thus we move to NTP synchronisation) */ #define GPS16X_SPEED B19200 #define GPS16X_CFLAG (CS8|CREAD|CLOCAL|HUPCL) #define GPS16X_IFLAG (IGNBRK|IGNPAR) #define GPS16X_OFLAG MBG_OFLAG #define GPS16X_LFLAG MBG_LFLAG #define GPS16X_POLLRATE 6 #define GPS16X_POLLCMD "" #define GPS16X_CMDSIZE 0 static poll_info_t gps16x_pollinfo = { GPS16X_POLLRATE, GPS16X_POLLCMD, GPS16X_CMDSIZE }; #define GPS16X_INIT gps16x_poll_init #define GPS16X_POLL 0 #define GPS16X_END 0 #define GPS16X_DATA ((void *)(&gps16x_pollinfo)) #define GPS16X_MESSAGE gps16x_message #define GPS16X_ID GPS_ID #define GPS16X_FORMAT "Meinberg GPS Extended" #define GPS16X_SAMPLES 5 #define GPS16X_KEEP 3 /* * ELV DCF7000 Wallclock-Receiver/Switching Clock (Kit) * * This is really not the hottest clock - but before you have nothing ... */ #define DCF7000_ROOTDELAY 0.0 /* 0 */ #define DCF7000_BASEDELAY 0.405 /* slow blow */ #define DCF7000_DESCRIPTION "ELV DCF7000" #define DCF7000_MAXUNSYNC (60*5) /* sorry - but it just was not build as a clock */ #define DCF7000_SPEED (B9600) #define DCF7000_CFLAG (CS8|CREAD|PARENB|PARODD|CLOCAL|HUPCL) #define DCF7000_IFLAG (IGNBRK) #define DCF7000_OFLAG 0 #define DCF7000_LFLAG 0 #define DCF7000_SAMPLES 5 #define DCF7000_KEEP 3 #define DCF7000_FORMAT "ELV DCF7000" /* * Schmid DCF Receiver Kit * * When the WSDCF clock is operating optimally we want the primary clock * distance to come out at 300 ms. Thus, peer.distance in the WSDCF peer * structure is set to 290 ms and we compute delays which are at least * 10 ms long. The following are 290 ms and 10 ms expressed in u_fp format */ #define WS_POLLRATE 1 /* every second - watch interdependency with poll routine */ #define WS_POLLCMD "\163" #define WS_CMDSIZE 1 static poll_info_t wsdcf_pollinfo = { WS_POLLRATE, WS_POLLCMD, WS_CMDSIZE }; #define WSDCF_INIT poll_init #define WSDCF_POLL poll_dpoll #define WSDCF_END 0 #define WSDCF_DATA ((void *)(&wsdcf_pollinfo)) #define WSDCF_ROOTDELAY 0.0 /* 0 */ #define WSDCF_BASEDELAY 0.010 /* ~ 10ms */ #define WSDCF_DESCRIPTION "WS/DCF Receiver" #define WSDCF_FORMAT "Schmid" #define WSDCF_MAXUNSYNC (60*60) /* assume this beast hold at 1 h better than 2 ms XXX-must verify */ #define WSDCF_SPEED (B1200) #define WSDCF_CFLAG (CS8|CREAD|CLOCAL) #define WSDCF_IFLAG 0 #define WSDCF_OFLAG 0 #define WSDCF_LFLAG 0 #define WSDCF_SAMPLES 5 #define WSDCF_KEEP 3 /* * RAW DCF77 - input of DCF marks via RS232 - many variants */ #define RAWDCF_FLAGS 0 #define RAWDCF_ROOTDELAY 0.0 /* 0 */ #define RAWDCF_BASEDELAY 0.258 #define RAWDCF_FORMAT "RAW DCF77 Timecode" #define RAWDCF_MAXUNSYNC (0) /* sorry - its a true receiver - no signal - no time */ #define RAWDCF_SPEED (B50) #ifdef NO_PARENB_IGNPAR /* Was: defined(SYS_IRIX4) || defined(SYS_IRIX5) */ /* somehow doesn't grok PARENB & IGNPAR (mj) */ # define RAWDCF_CFLAG (CS8|CREAD|CLOCAL) #else # define RAWDCF_CFLAG (CS8|CREAD|CLOCAL|PARENB) #endif #ifdef RAWDCF_NO_IGNPAR /* Was: defined(SYS_LINUX) && defined(CLOCK_RAWDCF) */ # define RAWDCF_IFLAG 0 #else # define RAWDCF_IFLAG (IGNPAR) #endif #define RAWDCF_OFLAG 0 #define RAWDCF_LFLAG 0 #define RAWDCF_SAMPLES 20 #define RAWDCF_KEEP 12 #define RAWDCF_INIT 0 /* * RAW DCF variants */ /* * Conrad receiver * * simplest (cheapest) DCF clock - e. g. DCF77 receiver by Conrad * (~40DM - roughly $30 ) followed by a level converter for RS232 */ #define CONRAD_BASEDELAY 0.292 /* Conrad receiver @ 50 Baud on a Sun */ #define CONRAD_DESCRIPTION "RAW DCF77 CODE (Conrad DCF77 receiver module)" /* Gude Analog- und Digitalsystem GmbH 'Expert mouseCLOCK USB v2.0' */ #define GUDE_EMC_USB_V20_SPEED (B4800) #define GUDE_EMC_USB_V20_BASEDELAY 0.425 /* USB serial<->USB converter FTDI232R */ #define GUDE_EMC_USB_V20_DESCRIPTION "RAW DCF77 CODE (Expert mouseCLOCK USB v2.0)" /* * TimeBrick receiver */ #define TIMEBRICK_BASEDELAY 0.210 /* TimeBrick @ 50 Baud on a Sun */ #define TIMEBRICK_DESCRIPTION "RAW DCF77 CODE (TimeBrick)" /* * IGEL:clock receiver */ #define IGELCLOCK_BASEDELAY 0.258 /* IGEL:clock receiver */ #define IGELCLOCK_DESCRIPTION "RAW DCF77 CODE (IGEL:clock)" #define IGELCLOCK_SPEED (B1200) #define IGELCLOCK_CFLAG (CS8|CREAD|HUPCL|CLOCAL) /* * RAWDCF receivers that need to be powered from DTR * (like Expert mouse clock) */ static int rawdcf_init_1 (struct parseunit *); #define RAWDCFDTRSET_DESCRIPTION "RAW DCF77 CODE (DTR SET/RTS CLR)" #define RAWDCFDTRSET75_DESCRIPTION "RAW DCF77 CODE (DTR SET/RTS CLR @ 75 baud)" #define RAWDCFDTRSET_INIT rawdcf_init_1 /* * RAWDCF receivers that need to be powered from * DTR CLR and RTS SET */ static int rawdcf_init_2 (struct parseunit *); #define RAWDCFDTRCLRRTSSET_DESCRIPTION "RAW DCF77 CODE (DTR CLR/RTS SET)" #define RAWDCFDTRCLRRTSSET75_DESCRIPTION "RAW DCF77 CODE (DTR CLR/RTS SET @ 75 baud)" #define RAWDCFDTRCLRRTSSET_INIT rawdcf_init_2 /* * Trimble GPS receivers (TAIP and TSIP protocols) */ #ifndef TRIM_POLLRATE #define TRIM_POLLRATE 0 /* only true direct polling */ #endif #define TRIM_TAIPPOLLCMD ">SRM;FR_FLAG=F;EC_FLAG=F<>QTM<" #define TRIM_TAIPCMDSIZE (sizeof(TRIM_TAIPPOLLCMD)-1) static poll_info_t trimbletaip_pollinfo = { TRIM_POLLRATE, TRIM_TAIPPOLLCMD, TRIM_TAIPCMDSIZE }; static int trimbletaip_init (struct parseunit *); static void trimbletaip_event (struct parseunit *, int); /* query time & UTC correction data */ static char tsipquery[] = { DLE, 0x21, DLE, ETX, DLE, 0x2F, DLE, ETX }; static poll_info_t trimbletsip_pollinfo = { TRIM_POLLRATE, tsipquery, sizeof(tsipquery) }; static int trimbletsip_init (struct parseunit *); static void trimbletsip_end (struct parseunit *); static void trimbletsip_message (struct parseunit *, parsetime_t *); static void trimbletsip_event (struct parseunit *, int); #define TRIMBLETSIP_IDLE_TIME (300) /* 5 minutes silence at most */ #define TRIMBLE_RESET_HOLDOFF TRIMBLETSIP_IDLE_TIME #define TRIMBLETAIP_SPEED (B4800) #define TRIMBLETAIP_CFLAG (CS8|CREAD|CLOCAL) #define TRIMBLETAIP_IFLAG (BRKINT|IGNPAR|ISTRIP|ICRNL|IXON) #define TRIMBLETAIP_OFLAG (OPOST|ONLCR) #define TRIMBLETAIP_LFLAG (0) #define TRIMBLETSIP_SPEED (B9600) #define TRIMBLETSIP_CFLAG (CS8|CLOCAL|CREAD|PARENB|PARODD) #define TRIMBLETSIP_IFLAG (IGNBRK) #define TRIMBLETSIP_OFLAG (0) #define TRIMBLETSIP_LFLAG (ICANON) #define TRIMBLETSIP_SAMPLES 5 #define TRIMBLETSIP_KEEP 3 #define TRIMBLETAIP_SAMPLES 5 #define TRIMBLETAIP_KEEP 3 #define TRIMBLETAIP_FLAGS (PARSE_F_PPSONSECOND) #define TRIMBLETSIP_FLAGS (TRIMBLETAIP_FLAGS) #define TRIMBLETAIP_POLL poll_dpoll #define TRIMBLETSIP_POLL poll_dpoll #define TRIMBLETAIP_INIT trimbletaip_init #define TRIMBLETSIP_INIT trimbletsip_init #define TRIMBLETAIP_EVENT trimbletaip_event #define TRIMBLETSIP_EVENT trimbletsip_event #define TRIMBLETSIP_MESSAGE trimbletsip_message #define TRIMBLETAIP_END 0 #define TRIMBLETSIP_END trimbletsip_end #define TRIMBLETAIP_DATA ((void *)(&trimbletaip_pollinfo)) #define TRIMBLETSIP_DATA ((void *)(&trimbletsip_pollinfo)) #define TRIMBLETAIP_ID GPS_ID #define TRIMBLETSIP_ID GPS_ID #define TRIMBLETAIP_FORMAT "Trimble TAIP" #define TRIMBLETSIP_FORMAT "Trimble TSIP" #define TRIMBLETAIP_ROOTDELAY 0x0 #define TRIMBLETSIP_ROOTDELAY 0x0 #define TRIMBLETAIP_BASEDELAY 0.0 #define TRIMBLETSIP_BASEDELAY 0.020 /* GPS time message latency */ #define TRIMBLETAIP_DESCRIPTION "Trimble GPS (TAIP) receiver" #define TRIMBLETSIP_DESCRIPTION "Trimble GPS (TSIP) receiver" #define TRIMBLETAIP_MAXUNSYNC 0 #define TRIMBLETSIP_MAXUNSYNC 0 #define TRIMBLETAIP_EOL '<' /* * RadioCode Clocks RCC 800 receiver */ #define RCC_POLLRATE 0 /* only true direct polling */ #define RCC_POLLCMD "\r" #define RCC_CMDSIZE 1 static poll_info_t rcc8000_pollinfo = { RCC_POLLRATE, RCC_POLLCMD, RCC_CMDSIZE }; #define RCC8000_FLAGS 0 #define RCC8000_POLL poll_dpoll #define RCC8000_INIT poll_init #define RCC8000_END 0 #define RCC8000_DATA ((void *)(&rcc8000_pollinfo)) #define RCC8000_ROOTDELAY 0.0 #define RCC8000_BASEDELAY 0.0 #define RCC8000_ID "MSF" #define RCC8000_DESCRIPTION "RCC 8000 MSF Receiver" #define RCC8000_FORMAT "Radiocode RCC8000" #define RCC8000_MAXUNSYNC (60*60) /* should be ok for an hour */ #define RCC8000_SPEED (B2400) #define RCC8000_CFLAG (CS8|CREAD|CLOCAL) #define RCC8000_IFLAG (IGNBRK|IGNPAR) #define RCC8000_OFLAG 0 #define RCC8000_LFLAG 0 #define RCC8000_SAMPLES 5 #define RCC8000_KEEP 3 /* * Hopf Radio clock 6021 Format * */ #define HOPF6021_ROOTDELAY 0.0 #define HOPF6021_BASEDELAY 0.0 #define HOPF6021_DESCRIPTION "HOPF 6021" #define HOPF6021_FORMAT "hopf Funkuhr 6021" #define HOPF6021_MAXUNSYNC (60*60) /* should be ok for an hour */ #define HOPF6021_SPEED (B9600) #define HOPF6021_CFLAG (CS8|CREAD|CLOCAL) #define HOPF6021_IFLAG (IGNBRK|ISTRIP) #define HOPF6021_OFLAG 0 #define HOPF6021_LFLAG 0 #define HOPF6021_FLAGS 0 #define HOPF6021_SAMPLES 5 #define HOPF6021_KEEP 3 /* * Diem's Computime Radio Clock Receiver */ #define COMPUTIME_FLAGS 0 #define COMPUTIME_ROOTDELAY 0.0 #define COMPUTIME_BASEDELAY 0.0 #define COMPUTIME_ID DCF_ID #define COMPUTIME_DESCRIPTION "Diem's Computime receiver" #define COMPUTIME_FORMAT "Diem's Computime Radio Clock" #define COMPUTIME_TYPE DCF_TYPE #define COMPUTIME_MAXUNSYNC (60*60) /* only trust clock for 1 hour */ #define COMPUTIME_SPEED (B9600) #define COMPUTIME_CFLAG (CSTOPB|CS7|CREAD|CLOCAL) #define COMPUTIME_IFLAG (IGNBRK|IGNPAR|ISTRIP) #define COMPUTIME_OFLAG 0 #define COMPUTIME_LFLAG 0 #define COMPUTIME_SAMPLES 5 #define COMPUTIME_KEEP 3 /* * Varitext Radio Clock Receiver */ #define VARITEXT_FLAGS 0 #define VARITEXT_ROOTDELAY 0.0 #define VARITEXT_BASEDELAY 0.0 #define VARITEXT_ID "MSF" #define VARITEXT_DESCRIPTION "Varitext receiver" #define VARITEXT_FORMAT "Varitext Radio Clock" #define VARITEXT_TYPE DCF_TYPE #define VARITEXT_MAXUNSYNC (60*60) /* only trust clock for 1 hour */ #define VARITEXT_SPEED (B9600) #define VARITEXT_CFLAG (CS7|CREAD|CLOCAL|PARENB|PARODD) #define VARITEXT_IFLAG (IGNPAR|IGNBRK|INPCK) /*|ISTRIP)*/ #define VARITEXT_OFLAG 0 #define VARITEXT_LFLAG 0 #define VARITEXT_SAMPLES 32 #define VARITEXT_KEEP 20 /* * SEL240x Satellite Sychronized Clock */ #define SEL240X_POLLRATE 0 /* only true direct polling */ #define SEL240X_POLLCMD "BUB8" #define SEL240X_CMDSIZE 4 static poll_info_t sel240x_pollinfo = { SEL240X_POLLRATE, SEL240X_POLLCMD, SEL240X_CMDSIZE }; #define SEL240X_FLAGS (PARSE_F_PPSONSECOND) #define SEL240X_POLL poll_dpoll #define SEL240X_INIT poll_init #define SEL240X_END 0 #define SEL240X_DATA ((void *)(&sel240x_pollinfo)) #define SEL240X_ROOTDELAY 0.0 #define SEL240X_BASEDELAY 0.0 #define SEL240X_ID GPS_ID #define SEL240X_DESCRIPTION "SEL240x Satellite Synchronized Clock" #define SEL240X_FORMAT "SEL B8" #define SEL240X_MAXUNSYNC 60*60*12 /* only trust clock for 12 hours */ #define SEL240X_SPEED (B9600) #define SEL240X_CFLAG (CS8|CREAD|CLOCAL) #define SEL240X_IFLAG (IGNBRK|IGNPAR) #define SEL240X_OFLAG (0) #define SEL240X_LFLAG (0) #define SEL240X_SAMPLES 5 #define SEL240X_KEEP 3 static struct parse_clockinfo { u_long cl_flags; /* operation flags (PPS interpretation, trust handling) */ void (*cl_poll) (struct parseunit *); /* active poll routine */ int (*cl_init) (struct parseunit *); /* active poll init routine */ void (*cl_event) (struct parseunit *, int); /* special event handling (e.g. reset clock) */ void (*cl_end) (struct parseunit *); /* active poll end routine */ void (*cl_message) (struct parseunit *, parsetime_t *); /* process a lower layer message */ void *cl_data; /* local data area for "poll" mechanism */ double cl_rootdelay; /* rootdelay */ double cl_basedelay; /* current offset by which the RS232 time code is delayed from the actual time */ const char *cl_id; /* ID code */ const char *cl_description; /* device name */ const char *cl_format; /* fixed format */ u_char cl_type; /* clock type (ntp control) */ u_long cl_maxunsync; /* time to trust oscillator after losing synch */ u_long cl_speed; /* terminal input & output baudrate */ u_long cl_cflag; /* terminal control flags */ u_long cl_iflag; /* terminal input flags */ u_long cl_oflag; /* terminal output flags */ u_long cl_lflag; /* terminal local flags */ u_long cl_samples; /* samples for median filter */ u_long cl_keep; /* samples for median filter to keep */ } parse_clockinfo[] = { { /* mode 0 */ MBG_FLAGS, NO_POLL, NO_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, DCFPZF535_ROOTDELAY, DCFPZF535_BASEDELAY, DCF_P_ID, DCFPZF535_DESCRIPTION, DCFPZF535_FORMAT, DCF_TYPE, DCFPZF535_MAXUNSYNC, DCFPZF535_SPEED, DCFPZF535_CFLAG, DCFPZF535_IFLAG, DCFPZF535_OFLAG, DCFPZF535_LFLAG, DCFPZF535_SAMPLES, DCFPZF535_KEEP }, { /* mode 1 */ MBG_FLAGS, NO_POLL, NO_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, DCFPZF535OCXO_ROOTDELAY, DCFPZF535OCXO_BASEDELAY, DCF_P_ID, DCFPZF535OCXO_DESCRIPTION, DCFPZF535OCXO_FORMAT, DCF_TYPE, DCFPZF535OCXO_MAXUNSYNC, DCFPZF535OCXO_SPEED, DCFPZF535OCXO_CFLAG, DCFPZF535OCXO_IFLAG, DCFPZF535OCXO_OFLAG, DCFPZF535OCXO_LFLAG, DCFPZF535OCXO_SAMPLES, DCFPZF535OCXO_KEEP }, { /* mode 2 */ MBG_FLAGS, NO_POLL, NO_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, DCFUA31_ROOTDELAY, DCFUA31_BASEDELAY, DCF_A_ID, DCFUA31_DESCRIPTION, DCFUA31_FORMAT, DCF_TYPE, DCFUA31_MAXUNSYNC, DCFUA31_SPEED, DCFUA31_CFLAG, DCFUA31_IFLAG, DCFUA31_OFLAG, DCFUA31_LFLAG, DCFUA31_SAMPLES, DCFUA31_KEEP }, { /* mode 3 */ MBG_FLAGS, NO_POLL, NO_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, DCF7000_ROOTDELAY, DCF7000_BASEDELAY, DCF_A_ID, DCF7000_DESCRIPTION, DCF7000_FORMAT, DCF_TYPE, DCF7000_MAXUNSYNC, DCF7000_SPEED, DCF7000_CFLAG, DCF7000_IFLAG, DCF7000_OFLAG, DCF7000_LFLAG, DCF7000_SAMPLES, DCF7000_KEEP }, { /* mode 4 */ NO_CL_FLAGS, WSDCF_POLL, WSDCF_INIT, NO_EVENT, WSDCF_END, NO_MESSAGE, WSDCF_DATA, WSDCF_ROOTDELAY, WSDCF_BASEDELAY, DCF_A_ID, WSDCF_DESCRIPTION, WSDCF_FORMAT, DCF_TYPE, WSDCF_MAXUNSYNC, WSDCF_SPEED, WSDCF_CFLAG, WSDCF_IFLAG, WSDCF_OFLAG, WSDCF_LFLAG, WSDCF_SAMPLES, WSDCF_KEEP }, { /* mode 5 */ RAWDCF_FLAGS, NO_POLL, RAWDCF_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, RAWDCF_ROOTDELAY, CONRAD_BASEDELAY, DCF_A_ID, CONRAD_DESCRIPTION, RAWDCF_FORMAT, DCF_TYPE, RAWDCF_MAXUNSYNC, RAWDCF_SPEED, RAWDCF_CFLAG, RAWDCF_IFLAG, RAWDCF_OFLAG, RAWDCF_LFLAG, RAWDCF_SAMPLES, RAWDCF_KEEP }, { /* mode 6 */ RAWDCF_FLAGS, NO_POLL, RAWDCF_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, RAWDCF_ROOTDELAY, TIMEBRICK_BASEDELAY, DCF_A_ID, TIMEBRICK_DESCRIPTION, RAWDCF_FORMAT, DCF_TYPE, RAWDCF_MAXUNSYNC, RAWDCF_SPEED, RAWDCF_CFLAG, RAWDCF_IFLAG, RAWDCF_OFLAG, RAWDCF_LFLAG, RAWDCF_SAMPLES, RAWDCF_KEEP }, { /* mode 7 */ MBG_FLAGS, GPS16X_POLL, GPS16X_INIT, NO_EVENT, GPS16X_END, GPS16X_MESSAGE, GPS16X_DATA, GPS16X_ROOTDELAY, GPS16X_BASEDELAY, GPS16X_ID, GPS16X_DESCRIPTION, GPS16X_FORMAT, GPS_TYPE, GPS16X_MAXUNSYNC, GPS16X_SPEED, GPS16X_CFLAG, GPS16X_IFLAG, GPS16X_OFLAG, GPS16X_LFLAG, GPS16X_SAMPLES, GPS16X_KEEP }, { /* mode 8 */ RAWDCF_FLAGS, NO_POLL, NO_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, RAWDCF_ROOTDELAY, IGELCLOCK_BASEDELAY, DCF_A_ID, IGELCLOCK_DESCRIPTION, RAWDCF_FORMAT, DCF_TYPE, RAWDCF_MAXUNSYNC, IGELCLOCK_SPEED, IGELCLOCK_CFLAG, RAWDCF_IFLAG, RAWDCF_OFLAG, RAWDCF_LFLAG, RAWDCF_SAMPLES, RAWDCF_KEEP }, { /* mode 9 */ TRIMBLETAIP_FLAGS, #if TRIM_POLLRATE /* DHD940515: Allow user config */ NO_POLL, #else TRIMBLETAIP_POLL, #endif TRIMBLETAIP_INIT, TRIMBLETAIP_EVENT, TRIMBLETAIP_END, NO_MESSAGE, TRIMBLETAIP_DATA, TRIMBLETAIP_ROOTDELAY, TRIMBLETAIP_BASEDELAY, TRIMBLETAIP_ID, TRIMBLETAIP_DESCRIPTION, TRIMBLETAIP_FORMAT, GPS_TYPE, TRIMBLETAIP_MAXUNSYNC, TRIMBLETAIP_SPEED, TRIMBLETAIP_CFLAG, TRIMBLETAIP_IFLAG, TRIMBLETAIP_OFLAG, TRIMBLETAIP_LFLAG, TRIMBLETAIP_SAMPLES, TRIMBLETAIP_KEEP }, { /* mode 10 */ TRIMBLETSIP_FLAGS, #if TRIM_POLLRATE /* DHD940515: Allow user config */ NO_POLL, #else TRIMBLETSIP_POLL, #endif TRIMBLETSIP_INIT, TRIMBLETSIP_EVENT, TRIMBLETSIP_END, TRIMBLETSIP_MESSAGE, TRIMBLETSIP_DATA, TRIMBLETSIP_ROOTDELAY, TRIMBLETSIP_BASEDELAY, TRIMBLETSIP_ID, TRIMBLETSIP_DESCRIPTION, TRIMBLETSIP_FORMAT, GPS_TYPE, TRIMBLETSIP_MAXUNSYNC, TRIMBLETSIP_SPEED, TRIMBLETSIP_CFLAG, TRIMBLETSIP_IFLAG, TRIMBLETSIP_OFLAG, TRIMBLETSIP_LFLAG, TRIMBLETSIP_SAMPLES, TRIMBLETSIP_KEEP }, { /* mode 11 */ NO_CL_FLAGS, RCC8000_POLL, RCC8000_INIT, NO_EVENT, RCC8000_END, NO_MESSAGE, RCC8000_DATA, RCC8000_ROOTDELAY, RCC8000_BASEDELAY, RCC8000_ID, RCC8000_DESCRIPTION, RCC8000_FORMAT, DCF_TYPE, RCC8000_MAXUNSYNC, RCC8000_SPEED, RCC8000_CFLAG, RCC8000_IFLAG, RCC8000_OFLAG, RCC8000_LFLAG, RCC8000_SAMPLES, RCC8000_KEEP }, { /* mode 12 */ HOPF6021_FLAGS, NO_POLL, NO_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, HOPF6021_ROOTDELAY, HOPF6021_BASEDELAY, DCF_ID, HOPF6021_DESCRIPTION, HOPF6021_FORMAT, DCF_TYPE, HOPF6021_MAXUNSYNC, HOPF6021_SPEED, HOPF6021_CFLAG, HOPF6021_IFLAG, HOPF6021_OFLAG, HOPF6021_LFLAG, HOPF6021_SAMPLES, HOPF6021_KEEP }, { /* mode 13 */ COMPUTIME_FLAGS, NO_POLL, NO_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, COMPUTIME_ROOTDELAY, COMPUTIME_BASEDELAY, COMPUTIME_ID, COMPUTIME_DESCRIPTION, COMPUTIME_FORMAT, COMPUTIME_TYPE, COMPUTIME_MAXUNSYNC, COMPUTIME_SPEED, COMPUTIME_CFLAG, COMPUTIME_IFLAG, COMPUTIME_OFLAG, COMPUTIME_LFLAG, COMPUTIME_SAMPLES, COMPUTIME_KEEP }, { /* mode 14 */ RAWDCF_FLAGS, NO_POLL, RAWDCFDTRSET_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, RAWDCF_ROOTDELAY, RAWDCF_BASEDELAY, DCF_A_ID, RAWDCFDTRSET_DESCRIPTION, RAWDCF_FORMAT, DCF_TYPE, RAWDCF_MAXUNSYNC, RAWDCF_SPEED, RAWDCF_CFLAG, RAWDCF_IFLAG, RAWDCF_OFLAG, RAWDCF_LFLAG, RAWDCF_SAMPLES, RAWDCF_KEEP }, { /* mode 15 */ 0, /* operation flags (io modes) */ NO_POLL, /* active poll routine */ NO_INIT, /* active poll init routine */ NO_EVENT, /* special event handling (e.g. reset clock) */ NO_END, /* active poll end routine */ NO_MESSAGE, /* process a lower layer message */ NO_LCLDATA, /* local data area for "poll" mechanism */ 0, /* rootdelay */ 11.0 /* bits */ / 9600, /* current offset by which the RS232 time code is delayed from the actual time */ DCF_ID, /* ID code */ "WHARTON 400A Series clock", /* device name */ "WHARTON 400A Series clock Output Format 1", /* fixed format */ /* Must match a format-name in a libparse/clk_xxx.c file */ DCF_TYPE, /* clock type (ntp control) */ (1*60*60), /* time to trust oscillator after losing synch */ B9600, /* terminal input & output baudrate */ (CS8|CREAD|PARENB|CLOCAL|HUPCL),/* terminal control flags */ 0, /* terminal input flags */ 0, /* terminal output flags */ 0, /* terminal local flags */ 5, /* samples for median filter */ 3, /* samples for median filter to keep */ }, { /* mode 16 - RAWDCF RTS set, DTR clr */ RAWDCF_FLAGS, NO_POLL, RAWDCFDTRCLRRTSSET_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, RAWDCF_ROOTDELAY, RAWDCF_BASEDELAY, DCF_A_ID, RAWDCFDTRCLRRTSSET_DESCRIPTION, RAWDCF_FORMAT, DCF_TYPE, RAWDCF_MAXUNSYNC, RAWDCF_SPEED, RAWDCF_CFLAG, RAWDCF_IFLAG, RAWDCF_OFLAG, RAWDCF_LFLAG, RAWDCF_SAMPLES, RAWDCF_KEEP }, { /* mode 17 */ VARITEXT_FLAGS, NO_POLL, NO_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, VARITEXT_ROOTDELAY, VARITEXT_BASEDELAY, VARITEXT_ID, VARITEXT_DESCRIPTION, VARITEXT_FORMAT, VARITEXT_TYPE, VARITEXT_MAXUNSYNC, VARITEXT_SPEED, VARITEXT_CFLAG, VARITEXT_IFLAG, VARITEXT_OFLAG, VARITEXT_LFLAG, VARITEXT_SAMPLES, VARITEXT_KEEP }, { /* mode 18 */ MBG_FLAGS, NO_POLL, NO_INIT, NO_EVENT, GPS16X_END, GPS16X_MESSAGE, GPS16X_DATA, GPS16X_ROOTDELAY, GPS16X_BASEDELAY, GPS16X_ID, GPS16X_DESCRIPTION, GPS16X_FORMAT, GPS_TYPE, GPS16X_MAXUNSYNC, GPS16X_SPEED, GPS16X_CFLAG, GPS16X_IFLAG, GPS16X_OFLAG, GPS16X_LFLAG, GPS16X_SAMPLES, GPS16X_KEEP }, { /* mode 19 */ RAWDCF_FLAGS, NO_POLL, RAWDCF_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, RAWDCF_ROOTDELAY, GUDE_EMC_USB_V20_BASEDELAY, DCF_A_ID, GUDE_EMC_USB_V20_DESCRIPTION, RAWDCF_FORMAT, DCF_TYPE, RAWDCF_MAXUNSYNC, GUDE_EMC_USB_V20_SPEED, RAWDCF_CFLAG, RAWDCF_IFLAG, RAWDCF_OFLAG, RAWDCF_LFLAG, RAWDCF_SAMPLES, RAWDCF_KEEP }, { /* mode 20, like mode 14 but driven by 75 baud */ RAWDCF_FLAGS, NO_POLL, RAWDCFDTRSET_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, RAWDCF_ROOTDELAY, RAWDCF_BASEDELAY, DCF_A_ID, RAWDCFDTRSET75_DESCRIPTION, RAWDCF_FORMAT, DCF_TYPE, RAWDCF_MAXUNSYNC, B75, RAWDCF_CFLAG, RAWDCF_IFLAG, RAWDCF_OFLAG, RAWDCF_LFLAG, RAWDCF_SAMPLES, RAWDCF_KEEP }, { /* mode 21, like mode 16 but driven by 75 baud - RAWDCF RTS set, DTR clr */ RAWDCF_FLAGS, NO_POLL, RAWDCFDTRCLRRTSSET_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, RAWDCF_ROOTDELAY, RAWDCF_BASEDELAY, DCF_A_ID, RAWDCFDTRCLRRTSSET75_DESCRIPTION, RAWDCF_FORMAT, DCF_TYPE, RAWDCF_MAXUNSYNC, B75, RAWDCF_CFLAG, RAWDCF_IFLAG, RAWDCF_OFLAG, RAWDCF_LFLAG, RAWDCF_SAMPLES, RAWDCF_KEEP }, { /* mode 22 - like 2 with POWERUP trust */ MBG_FLAGS | PARSE_F_POWERUPTRUST, NO_POLL, NO_INIT, NO_EVENT, NO_END, NO_MESSAGE, NO_LCLDATA, DCFUA31_ROOTDELAY, DCFUA31_BASEDELAY, DCF_A_ID, DCFUA31_DESCRIPTION, DCFUA31_FORMAT, DCF_TYPE, DCFUA31_MAXUNSYNC, DCFUA31_SPEED, DCFUA31_CFLAG, DCFUA31_IFLAG, DCFUA31_OFLAG, DCFUA31_LFLAG, DCFUA31_SAMPLES, DCFUA31_KEEP }, { /* mode 23 - like 7 with POWERUP trust */ MBG_FLAGS | PARSE_F_POWERUPTRUST, GPS16X_POLL, GPS16X_INIT, NO_EVENT, GPS16X_END, GPS16X_MESSAGE, GPS16X_DATA, GPS16X_ROOTDELAY, GPS16X_BASEDELAY, GPS16X_ID, GPS16X_DESCRIPTION, GPS16X_FORMAT, GPS_TYPE, GPS16X_MAXUNSYNC, GPS16X_SPEED, GPS16X_CFLAG, GPS16X_IFLAG, GPS16X_OFLAG, GPS16X_LFLAG, GPS16X_SAMPLES, GPS16X_KEEP }, { /* mode 24 */ SEL240X_FLAGS, SEL240X_POLL, SEL240X_INIT, NO_EVENT, SEL240X_END, NO_MESSAGE, SEL240X_DATA, SEL240X_ROOTDELAY, SEL240X_BASEDELAY, SEL240X_ID, SEL240X_DESCRIPTION, SEL240X_FORMAT, GPS_TYPE, SEL240X_MAXUNSYNC, SEL240X_SPEED, SEL240X_CFLAG, SEL240X_IFLAG, SEL240X_OFLAG, SEL240X_LFLAG, SEL240X_SAMPLES, SEL240X_KEEP }, }; static int ncltypes = sizeof(parse_clockinfo) / sizeof(struct parse_clockinfo); #define CLK_REALTYPE(x) ((int)(((x)->ttl) & 0x7F)) #define CLK_TYPE(x) ((CLK_REALTYPE(x) >= ncltypes) ? ~0 : CLK_REALTYPE(x)) #define CLK_UNIT(x) ((int)REFCLOCKUNIT(&(x)->srcadr)) #define CLK_PPS(x) (((x)->ttl) & 0x80) /* * Other constant stuff */ #define PARSEHSREFID 0x7f7f08ff /* 127.127.8.255 refid for hi strata */ #define PARSESTATISTICS (60*60) /* output state statistics every hour */ static int notice = 0; #define PARSE_STATETIME(parse, i) ((parse->generic->currentstatus == i) ? parse->statetime[i] + current_time - parse->lastchange : parse->statetime[i]) static void parse_event (struct parseunit *, int); static void parse_process (struct parseunit *, parsetime_t *); static void clear_err (struct parseunit *, u_long); static int list_err (struct parseunit *, u_long); static char * l_mktime (u_long); /**=========================================================================== ** implementation error message regression module **/ static void clear_err( struct parseunit *parse, u_long lstate ) { if (lstate == ERR_ALL) { size_t i; for (i = 0; i < ERR_CNT; i++) { parse->errors[i].err_stage = err_tbl[i]; parse->errors[i].err_cnt = 0; parse->errors[i].err_last = 0; parse->errors[i].err_started = 0; parse->errors[i].err_suppressed = 0; } } else { parse->errors[lstate].err_stage = err_tbl[lstate]; parse->errors[lstate].err_cnt = 0; parse->errors[lstate].err_last = 0; parse->errors[lstate].err_started = 0; parse->errors[lstate].err_suppressed = 0; } } static int list_err( struct parseunit *parse, u_long lstate ) { int do_it; struct errorinfo *err = &parse->errors[lstate]; if (err->err_started == 0) { err->err_started = current_time; } do_it = (current_time - err->err_last) >= err->err_stage->err_delay; if (do_it) err->err_cnt++; if (err->err_stage->err_count && (err->err_cnt >= err->err_stage->err_count)) { err->err_stage++; err->err_cnt = 0; } if (!err->err_cnt && do_it) msyslog(LOG_INFO, "PARSE receiver #%d: interval for following error message class is at least %s", CLK_UNIT(parse->peer), l_mktime(err->err_stage->err_delay)); if (!do_it) err->err_suppressed++; else err->err_last = current_time; if (do_it && err->err_suppressed) { msyslog(LOG_INFO, "PARSE receiver #%d: %ld message%s suppressed, error condition class persists for %s", CLK_UNIT(parse->peer), err->err_suppressed, (err->err_suppressed == 1) ? " was" : "s where", l_mktime(current_time - err->err_started)); err->err_suppressed = 0; } return do_it; } /*-------------------------------------------------- * mkreadable - make a printable ascii string (without * embedded quotes so that the ntpq protocol isn't * fooled */ #ifndef isprint #define isprint(_X_) (((_X_) > 0x1F) && ((_X_) < 0x7F)) #endif static char * mkreadable( char *buffer, size_t blen, const char *src, size_t srclen, int hex ) { static const char ellipsis[] = "..."; char *b = buffer; char *endb = NULL; if (blen < 4) return NULL; /* don't bother with mini buffers */ endb = buffer + blen - sizeof(ellipsis); blen--; /* account for '\0' */ while (blen && srclen--) { if (!hex && /* no binary only */ (*src != '\\') && /* no plain \ */ (*src != '"') && /* no " */ isprint((unsigned char)*src)) /* only printables */ { /* they are easy... */ *buffer++ = *src++; blen--; } else { if (blen < 4) { while (blen--) { *buffer++ = '.'; } *buffer = '\0'; return b; } else { if (*src == '\\') { memcpy(buffer, "\\\\", 2); buffer += 2; blen -= 2; src++; } else { snprintf(buffer, blen, "\\x%02x", *src++); blen -= 4; buffer += 4; } } } if (srclen && !blen && endb) /* overflow - set last chars to ... */ memcpy(endb, ellipsis, sizeof(ellipsis)); } *buffer = '\0'; return b; } /*-------------------------------------------------- * mkascii - make a printable ascii string * assumes (unless defined better) 7-bit ASCII */ static char * mkascii( char *buffer, long blen, const char *src, u_long srclen ) { return mkreadable(buffer, blen, src, srclen, 0); } /**=========================================================================== ** implementation of i/o handling methods ** (all STREAM, partial STREAM, user level) **/ /* * define possible io handling methods */ #ifdef STREAM static int ppsclock_init (struct parseunit *); static int stream_init (struct parseunit *); static void stream_end (struct parseunit *); static int stream_enable (struct parseunit *); static int stream_disable (struct parseunit *); static int stream_setcs (struct parseunit *, parsectl_t *); static int stream_getfmt (struct parseunit *, parsectl_t *); static int stream_setfmt (struct parseunit *, parsectl_t *); static int stream_timecode (struct parseunit *, parsectl_t *); static void stream_receive (struct recvbuf *); #endif static int local_init (struct parseunit *); static void local_end (struct parseunit *); static int local_nop (struct parseunit *); static int local_setcs (struct parseunit *, parsectl_t *); static int local_getfmt (struct parseunit *, parsectl_t *); static int local_setfmt (struct parseunit *, parsectl_t *); static int local_timecode (struct parseunit *, parsectl_t *); static void local_receive (struct recvbuf *); static int local_input (struct recvbuf *); static bind_t io_bindings[] = { #ifdef STREAM { "parse STREAM", stream_init, stream_end, stream_setcs, stream_disable, stream_enable, stream_getfmt, stream_setfmt, stream_timecode, stream_receive, 0, }, { "ppsclock STREAM", ppsclock_init, local_end, local_setcs, local_nop, local_nop, local_getfmt, local_setfmt, local_timecode, local_receive, local_input, }, #endif { "normal", local_init, local_end, local_setcs, local_nop, local_nop, local_getfmt, local_setfmt, local_timecode, local_receive, local_input, }, { (char *)0, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, } }; #ifdef STREAM /*-------------------------------------------------- * ppsclock STREAM init */ static int ppsclock_init( struct parseunit *parse ) { static char m1[] = "ppsclocd"; static char m2[] = "ppsclock"; /* * now push the parse streams module * it will ensure exclusive access to the device */ if (ioctl(parse->ppsfd, I_PUSH, (caddr_t)m1) == -1 && ioctl(parse->ppsfd, I_PUSH, (caddr_t)m2) == -1) { if (errno != EINVAL) { msyslog(LOG_ERR, "PARSE receiver #%d: ppsclock_init: ioctl(fd, I_PUSH, \"ppsclock\"): %m", CLK_UNIT(parse->peer)); } return 0; } if (!local_init(parse)) { (void)ioctl(parse->ppsfd, I_POP, (caddr_t)0); return 0; } parse->flags |= PARSE_PPSCLOCK; return 1; } /*-------------------------------------------------- * parse STREAM init */ static int stream_init( struct parseunit *parse ) { static char m1[] = "parse"; /* * now push the parse streams module * to test whether it is there (neat interface 8-( ) */ if (ioctl(parse->generic->io.fd, I_PUSH, (caddr_t)m1) == -1) { if (errno != EINVAL) /* accept non-existence */ { msyslog(LOG_ERR, "PARSE receiver #%d: stream_init: ioctl(fd, I_PUSH, \"parse\"): %m", CLK_UNIT(parse->peer)); } return 0; } else { while(ioctl(parse->generic->io.fd, I_POP, (caddr_t)0) == 0) /* empty loop */; /* * now push it a second time after we have removed all * module garbage */ if (ioctl(parse->generic->io.fd, I_PUSH, (caddr_t)m1) == -1) { msyslog(LOG_ERR, "PARSE receiver #%d: stream_init: ioctl(fd, I_PUSH, \"parse\"): %m", CLK_UNIT(parse->peer)); return 0; } else { return 1; } } } /*-------------------------------------------------- * parse STREAM end */ static void stream_end( struct parseunit *parse ) { while(ioctl(parse->generic->io.fd, I_POP, (caddr_t)0) == 0) /* empty loop */; } /*-------------------------------------------------- * STREAM setcs */ static int stream_setcs( struct parseunit *parse, parsectl_t *tcl ) { struct strioctl strioc; strioc.ic_cmd = PARSEIOC_SETCS; strioc.ic_timout = 0; strioc.ic_dp = (char *)tcl; strioc.ic_len = sizeof (*tcl); if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) { msyslog(LOG_ERR, "PARSE receiver #%d: stream_setcs: ioctl(fd, I_STR, PARSEIOC_SETCS): %m", CLK_UNIT(parse->peer)); return 0; } return 1; } /*-------------------------------------------------- * STREAM enable */ static int stream_enable( struct parseunit *parse ) { struct strioctl strioc; strioc.ic_cmd = PARSEIOC_ENABLE; strioc.ic_timout = 0; strioc.ic_dp = (char *)0; strioc.ic_len = 0; if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) { msyslog(LOG_ERR, "PARSE receiver #%d: stream_enable: ioctl(fd, I_STR, PARSEIOC_ENABLE): %m", CLK_UNIT(parse->peer)); return 0; } parse->generic->io.clock_recv = stream_receive; /* ok - parse input in kernel */ return 1; } /*-------------------------------------------------- * STREAM disable */ static int stream_disable( struct parseunit *parse ) { struct strioctl strioc; strioc.ic_cmd = PARSEIOC_DISABLE; strioc.ic_timout = 0; strioc.ic_dp = (char *)0; strioc.ic_len = 0; if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) { msyslog(LOG_ERR, "PARSE receiver #%d: stream_disable: ioctl(fd, I_STR, PARSEIOC_DISABLE): %m", CLK_UNIT(parse->peer)); return 0; } parse->generic->io.clock_recv = local_receive; /* ok - parse input in daemon */ return 1; } /*-------------------------------------------------- * STREAM getfmt */ static int stream_getfmt( struct parseunit *parse, parsectl_t *tcl ) { struct strioctl strioc; strioc.ic_cmd = PARSEIOC_GETFMT; strioc.ic_timout = 0; strioc.ic_dp = (char *)tcl; strioc.ic_len = sizeof (*tcl); if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) { msyslog(LOG_ERR, "PARSE receiver #%d: ioctl(fd, I_STR, PARSEIOC_GETFMT): %m", CLK_UNIT(parse->peer)); return 0; } return 1; } /*-------------------------------------------------- * STREAM setfmt */ static int stream_setfmt( struct parseunit *parse, parsectl_t *tcl ) { struct strioctl strioc; strioc.ic_cmd = PARSEIOC_SETFMT; strioc.ic_timout = 0; strioc.ic_dp = (char *)tcl; strioc.ic_len = sizeof (*tcl); if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) { msyslog(LOG_ERR, "PARSE receiver #%d: stream_setfmt: ioctl(fd, I_STR, PARSEIOC_SETFMT): %m", CLK_UNIT(parse->peer)); return 0; } return 1; } /*-------------------------------------------------- * STREAM timecode */ static int stream_timecode( struct parseunit *parse, parsectl_t *tcl ) { struct strioctl strioc; strioc.ic_cmd = PARSEIOC_TIMECODE; strioc.ic_timout = 0; strioc.ic_dp = (char *)tcl; strioc.ic_len = sizeof (*tcl); if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) { ERR(ERR_INTERNAL) msyslog(LOG_ERR, "PARSE receiver #%d: stream_timecode: ioctl(fd, I_STR, PARSEIOC_TIMECODE): %m", CLK_UNIT(parse->peer)); return 0; } clear_err(parse, ERR_INTERNAL); return 1; } /*-------------------------------------------------- * STREAM receive */ static void stream_receive( struct recvbuf *rbufp ) { struct parseunit * parse; parsetime_t parsetime; parse = (struct parseunit *)rbufp->recv_peer->procptr->unitptr; if (!parse->peer) return; if (rbufp->recv_length != sizeof(parsetime_t)) { ERR(ERR_BADIO) msyslog(LOG_ERR,"PARSE receiver #%d: stream_receive: bad size (got %d expected %d)", CLK_UNIT(parse->peer), rbufp->recv_length, (int)sizeof(parsetime_t)); parse_event(parse, CEVNT_BADREPLY); return; } clear_err(parse, ERR_BADIO); memmove((caddr_t)&parsetime, (caddr_t)rbufp->recv_buffer, sizeof(parsetime_t)); #ifdef DEBUG if (debug > 3) { printf("PARSE receiver #%d: status %06x, state %08x, time %lx.%08lx, stime %lx.%08lx, ptime %lx.%08lx\n", CLK_UNIT(parse->peer), (unsigned int)parsetime.parse_status, (unsigned int)parsetime.parse_state, (unsigned long)parsetime.parse_time.tv.tv_sec, (unsigned long)parsetime.parse_time.tv.tv_usec, (unsigned long)parsetime.parse_stime.tv.tv_sec, (unsigned long)parsetime.parse_stime.tv.tv_usec, (unsigned long)parsetime.parse_ptime.tv.tv_sec, (unsigned long)parsetime.parse_ptime.tv.tv_usec); } #endif /* * switch time stamp world - be sure to normalize small usec field * errors. */ parsetime.parse_stime.fp = tval_stamp_to_lfp(parsetime.parse_stime.tv); if (PARSE_TIMECODE(parsetime.parse_state)) { parsetime.parse_time.fp = tval_stamp_to_lfp(parsetime.parse_time.tv); } if (PARSE_PPS(parsetime.parse_state)) { parsetime.parse_ptime.fp = tval_stamp_to_lfp(parsetime.parse_ptime.tv); } parse_process(parse, &parsetime); } #endif /*-------------------------------------------------- * local init */ static int local_init( struct parseunit *parse ) { return parse_ioinit(&parse->parseio); } /*-------------------------------------------------- * local end */ static void local_end( struct parseunit *parse ) { parse_ioend(&parse->parseio); } /*-------------------------------------------------- * local nop */ static int local_nop( struct parseunit *parse ) { return 1; } /*-------------------------------------------------- * local setcs */ static int local_setcs( struct parseunit *parse, parsectl_t *tcl ) { return parse_setcs(tcl, &parse->parseio); } /*-------------------------------------------------- * local getfmt */ static int local_getfmt( struct parseunit *parse, parsectl_t *tcl ) { return parse_getfmt(tcl, &parse->parseio); } /*-------------------------------------------------- * local setfmt */ static int local_setfmt( struct parseunit *parse, parsectl_t *tcl ) { return parse_setfmt(tcl, &parse->parseio); } /*-------------------------------------------------- * local timecode */ static int local_timecode( struct parseunit *parse, parsectl_t *tcl ) { return parse_timecode(tcl, &parse->parseio); } /*-------------------------------------------------- * local input */ static int local_input( struct recvbuf *rbufp ) { struct parseunit * parse; int count; unsigned char *s; timestamp_t ts; parse = (struct parseunit *)rbufp->recv_peer->procptr->unitptr; if (!parse->peer) return 0; /* * eat all characters, parsing then and feeding complete samples */ count = rbufp->recv_length; s = (unsigned char *)rbufp->recv_buffer; ts.fp = rbufp->recv_time; while (count--) { if (parse_ioread(&parse->parseio, (unsigned int)(*s++), &ts)) { struct recvbuf *buf; /* * got something good to eat */ if (!PARSE_PPS(parse->parseio.parse_dtime.parse_state)) { #ifdef HAVE_PPSAPI if (parse->flags & PARSE_PPSCLOCK) { struct timespec pps_timeout; pps_info_t pps_info; pps_timeout.tv_sec = 0; pps_timeout.tv_nsec = 0; if (time_pps_fetch(parse->atom.handle, PPS_TSFMT_TSPEC, &pps_info, &pps_timeout) == 0) { if (pps_info.assert_sequence + pps_info.clear_sequence != parse->ppsserial) { double dtemp; struct timespec pts; /* * add PPS time stamp if available via ppsclock module * and not supplied already. */ if (parse->flags & PARSE_CLEAR) pts = pps_info.clear_timestamp; else pts = pps_info.assert_timestamp; parse->parseio.parse_dtime.parse_ptime.fp.l_ui = (uint32_t) (pts.tv_sec + JAN_1970); dtemp = (double) pts.tv_nsec / 1e9; if (dtemp < 0.) { dtemp += 1; parse->parseio.parse_dtime.parse_ptime.fp.l_ui--; } if (dtemp > 1.) { dtemp -= 1; parse->parseio.parse_dtime.parse_ptime.fp.l_ui++; } parse->parseio.parse_dtime.parse_ptime.fp.l_uf = (uint32_t)(dtemp * FRAC); parse->parseio.parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS; #ifdef DEBUG if (debug > 3) { printf( "parse: local_receive: fd %ld PPSAPI seq %ld - PPS %s\n", (long)rbufp->fd, (long)pps_info.assert_sequence + (long)pps_info.clear_sequence, lfptoa(&parse->parseio.parse_dtime.parse_ptime.fp, 6)); } #endif } #ifdef DEBUG else { if (debug > 3) { printf( "parse: local_receive: fd %ld PPSAPI seq assert %ld, seq clear %ld - NO PPS event\n", (long)rbufp->fd, (long)pps_info.assert_sequence, (long)pps_info.clear_sequence); } } #endif parse->ppsserial = pps_info.assert_sequence + pps_info.clear_sequence; } #ifdef DEBUG else { if (debug > 3) { printf( "parse: local_receive: fd %ld PPSAPI time_pps_fetch errno = %d\n", (long)rbufp->fd, errno); } } #endif } #else #ifdef TIOCDCDTIMESTAMP struct timeval dcd_time; if (ioctl(parse->ppsfd, TIOCDCDTIMESTAMP, &dcd_time) != -1) { l_fp tstmp; TVTOTS(&dcd_time, &tstmp); tstmp.l_ui += JAN_1970; L_SUB(&ts.fp, &tstmp); if (ts.fp.l_ui == 0) { #ifdef DEBUG if (debug) { printf( "parse: local_receive: fd %d DCDTIMESTAMP %s\n", parse->ppsfd, lfptoa(&tstmp, 6)); printf(" sigio %s\n", lfptoa(&ts.fp, 6)); } #endif parse->parseio.parse_dtime.parse_ptime.fp = tstmp; parse->parseio.parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS; } } #else /* TIOCDCDTIMESTAMP */ #if defined(HAVE_STRUCT_PPSCLOCKEV) && (defined(HAVE_CIOGETEV) || defined(HAVE_TIOCGPPSEV)) if (parse->flags & PARSE_PPSCLOCK) { l_fp tts; struct ppsclockev ev; #ifdef HAVE_CIOGETEV if (ioctl(parse->ppsfd, CIOGETEV, (caddr_t)&ev) == 0) #endif #ifdef HAVE_TIOCGPPSEV if (ioctl(parse->ppsfd, TIOCGPPSEV, (caddr_t)&ev) == 0) #endif { if (ev.serial != parse->ppsserial) { /* * add PPS time stamp if available via ppsclock module * and not supplied already. */ if (!buftvtots((const char *)&ev.tv, &tts)) { ERR(ERR_BADDATA) msyslog(LOG_ERR,"parse: local_receive: timestamp conversion error (buftvtots) (ppsclockev.tv)"); } else { parse->parseio.parse_dtime.parse_ptime.fp = tts; parse->parseio.parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS; } } parse->ppsserial = ev.serial; } } #endif #endif /* TIOCDCDTIMESTAMP */ #endif /* !HAVE_PPSAPI */ } if (count) { /* simulate receive */ buf = get_free_recv_buffer(); if (buf != NULL) { memmove((caddr_t)buf->recv_buffer, (caddr_t)&parse->parseio.parse_dtime, sizeof(parsetime_t)); buf->recv_length = sizeof(parsetime_t); buf->recv_time = rbufp->recv_time; #ifndef HAVE_IO_COMPLETION_PORT buf->srcadr = rbufp->srcadr; #endif buf->dstadr = rbufp->dstadr; buf->receiver = rbufp->receiver; buf->fd = rbufp->fd; buf->X_from_where = rbufp->X_from_where; parse->generic->io.recvcount++; packets_received++; add_full_recv_buffer(buf); #ifdef HAVE_IO_COMPLETION_PORT SetEvent(WaitableIoEventHandle); #endif } parse_iodone(&parse->parseio); } else { memmove((caddr_t)rbufp->recv_buffer, (caddr_t)&parse->parseio.parse_dtime, sizeof(parsetime_t)); parse_iodone(&parse->parseio); rbufp->recv_length = sizeof(parsetime_t); return 1; /* got something & in place return */ } } } return 0; /* nothing to pass up */ } /*-------------------------------------------------- * local receive */ static void local_receive( struct recvbuf *rbufp ) { struct parseunit * parse; parsetime_t parsetime; parse = (struct parseunit *)rbufp->recv_peer->procptr->unitptr; if (!parse->peer) return; if (rbufp->recv_length != sizeof(parsetime_t)) { ERR(ERR_BADIO) msyslog(LOG_ERR,"PARSE receiver #%d: local_receive: bad size (got %d expected %d)", CLK_UNIT(parse->peer), rbufp->recv_length, (int)sizeof(parsetime_t)); parse_event(parse, CEVNT_BADREPLY); return; } clear_err(parse, ERR_BADIO); memmove((caddr_t)&parsetime, (caddr_t)rbufp->recv_buffer, sizeof(parsetime_t)); #ifdef DEBUG if (debug > 3) { printf("PARSE receiver #%d: status %06x, state %08x, time(fp) %lx.%08lx, stime(fp) %lx.%08lx, ptime(fp) %lx.%08lx\n", CLK_UNIT(parse->peer), (unsigned int)parsetime.parse_status, (unsigned int)parsetime.parse_state, (unsigned long)parsetime.parse_time.fp.l_ui, (unsigned long)parsetime.parse_time.fp.l_uf, (unsigned long)parsetime.parse_stime.fp.l_ui, (unsigned long)parsetime.parse_stime.fp.l_uf, (unsigned long)parsetime.parse_ptime.fp.l_ui, (unsigned long)parsetime.parse_ptime.fp.l_uf); } #endif parse_process(parse, &parsetime); } /*-------------------------------------------------- * init_iobinding - find and initialize lower layers */ static bind_t * init_iobinding( struct parseunit *parse ) { bind_t *b = io_bindings; while (b->bd_description != (char *)0) { if ((*b->bd_init)(parse)) { return b; } b++; } return (bind_t *)0; } /**=========================================================================== ** support routines **/ static NTP_PRINTF(4, 5) char * ap(char *buffer, size_t len, char *pos, const char *fmt, ...) { va_list va; int l; size_t rem = len - (pos - buffer); if (rem == 0) return pos; va_start(va, fmt); l = vsnprintf(pos, rem, fmt, va); va_end(va); if (l != -1) { rem--; if (rem >= (size_t)l) pos += l; else pos += rem; } return pos; } /*-------------------------------------------------- * convert a flag field to a string */ static char * parsestate( u_long lstate, char *buffer, int size ) { static struct bits { u_long bit; const char *name; } flagstrings[] = { { PARSEB_ANNOUNCE, "DST SWITCH WARNING" }, { PARSEB_POWERUP, "NOT SYNCHRONIZED" }, { PARSEB_NOSYNC, "TIME CODE NOT CONFIRMED" }, { PARSEB_DST, "DST" }, { PARSEB_UTC, "UTC DISPLAY" }, { PARSEB_LEAPADD, "LEAP ADD WARNING" }, { PARSEB_LEAPDEL, "LEAP DELETE WARNING" }, { PARSEB_LEAPSECOND, "LEAP SECOND" }, { PARSEB_CALLBIT, "CALL BIT" }, { PARSEB_TIMECODE, "TIME CODE" }, { PARSEB_PPS, "PPS" }, { PARSEB_POSITION, "POSITION" }, { 0, NULL } }; static struct sbits { u_long bit; const char *name; } sflagstrings[] = { { PARSEB_S_LEAP, "LEAP INDICATION" }, { PARSEB_S_PPS, "PPS SIGNAL" }, { PARSEB_S_CALLBIT, "CALLBIT" }, { PARSEB_S_POSITION, "POSITION" }, { 0, NULL } }; int i; char *s, *t; *buffer = '\0'; s = t = buffer; i = 0; while (flagstrings[i].bit) { if (flagstrings[i].bit & lstate) { if (s != t) t = ap(buffer, size, t, "; "); t = ap(buffer, size, t, "%s", flagstrings[i].name); } i++; } if (lstate & (PARSEB_S_LEAP|PARSEB_S_CALLBIT|PARSEB_S_PPS|PARSEB_S_POSITION)) { if (s != t) t = ap(buffer, size, t, "; "); t = ap(buffer, size, t, "("); s = t; i = 0; while (sflagstrings[i].bit) { if (sflagstrings[i].bit & lstate) { if (t != s) { t = ap(buffer, size, t, "; "); } t = ap(buffer, size, t, "%s", sflagstrings[i].name); } i++; } t = ap(buffer, size, t, ")"); /* t is unused here, but if we don't track it and * need it later, that's a bug waiting to happen. */ } return buffer; } /*-------------------------------------------------- * convert a status flag field to a string */ static char * parsestatus( u_long lstate, char *buffer, int size ) { static struct bits { u_long bit; const char *name; } flagstrings[] = { { CVT_OK, "CONVERSION SUCCESSFUL" }, { CVT_NONE, "NO CONVERSION" }, { CVT_FAIL, "CONVERSION FAILED" }, { CVT_BADFMT, "ILLEGAL FORMAT" }, { CVT_BADDATE, "DATE ILLEGAL" }, { CVT_BADTIME, "TIME ILLEGAL" }, { CVT_ADDITIONAL, "ADDITIONAL DATA" }, { 0, NULL } }; int i; char *t; t = buffer; *buffer = '\0'; i = 0; while (flagstrings[i].bit) { if (flagstrings[i].bit & lstate) { if (t != buffer) t = ap(buffer, size, t, "; "); t = ap(buffer, size, t, "%s", flagstrings[i].name); } i++; } return buffer; } /*-------------------------------------------------- * convert a clock status flag field to a string */ static const char * clockstatus( u_long lstate ) { static char buffer[20]; static struct status { u_long value; const char *name; } flagstrings[] = { { CEVNT_NOMINAL, "NOMINAL" }, { CEVNT_TIMEOUT, "NO RESPONSE" }, { CEVNT_BADREPLY,"BAD FORMAT" }, { CEVNT_FAULT, "FAULT" }, { CEVNT_PROP, "PROPAGATION DELAY" }, { CEVNT_BADDATE, "ILLEGAL DATE" }, { CEVNT_BADTIME, "ILLEGAL TIME" }, { (unsigned)~0L, NULL } }; int i; i = 0; while (flagstrings[i].value != (u_int)~0) { if (flagstrings[i].value == lstate) { return flagstrings[i].name; } i++; } snprintf(buffer, sizeof(buffer), "unknown #%ld", (u_long)lstate); return buffer; } /*-------------------------------------------------- * l_mktime - make representation of a relative time */ static char * l_mktime( u_long delta ) { u_long tmp, m, s; static char buffer[40]; char *t; buffer[0] = '\0'; t = buffer; if ((tmp = delta / (60*60*24)) != 0) { t = ap(buffer, sizeof(buffer), t, "%ldd+", (u_long)tmp); delta -= tmp * 60*60*24; } s = delta % 60; delta /= 60; m = delta % 60; delta /= 60; t = ap(buffer, sizeof(buffer), t, "%02d:%02d:%02d", (int)delta, (int)m, (int)s); return buffer; } /*-------------------------------------------------- * parse_statistics - list summary of clock states */ static void parse_statistics( struct parseunit *parse ) { int i; NLOG(NLOG_CLOCKSTATIST) /* conditional if clause for conditional syslog */ { msyslog(LOG_INFO, "PARSE receiver #%d: running time: %s", CLK_UNIT(parse->peer), l_mktime(current_time - parse->generic->timestarted)); msyslog(LOG_INFO, "PARSE receiver #%d: current status: %s", CLK_UNIT(parse->peer), clockstatus(parse->generic->currentstatus)); for (i = 0; i <= CEVNT_MAX; i++) { u_long s_time; u_long percent, d = current_time - parse->generic->timestarted; percent = s_time = PARSE_STATETIME(parse, i); while (((u_long)(~0) / 10000) < percent) { percent /= 10; d /= 10; } if (d) percent = (percent * 10000) / d; else percent = 10000; if (s_time) msyslog(LOG_INFO, "PARSE receiver #%d: state %18s: %13s (%3ld.%02ld%%)", CLK_UNIT(parse->peer), clockstatus((unsigned int)i), l_mktime(s_time), percent / 100, percent % 100); } } } /*-------------------------------------------------- * cparse_statistics - wrapper for statistics call */ static void cparse_statistics( struct parseunit *parse ) { if (parse->laststatistic + PARSESTATISTICS < current_time) parse_statistics(parse); parse->laststatistic = current_time; } /**=========================================================================== ** ntp interface routines **/ /*-------------------------------------------------- * parse_shutdown - shut down a PARSE clock */ static void parse_shutdown( int unit, struct peer *peer ) { struct parseunit *parse = NULL; if (peer && peer->procptr) parse = peer->procptr->unitptr; if (!parse) { /* nothing to clean up */ return; } if (!parse->peer) { msyslog(LOG_INFO, "PARSE receiver #%d: INTERNAL ERROR - unit already inactive - shutdown ignored", unit); return; } #ifdef HAVE_PPSAPI if (parse->flags & PARSE_PPSCLOCK) { (void)time_pps_destroy(parse->atom.handle); } #endif if (parse->generic->io.fd != parse->ppsfd && parse->ppsfd != -1) (void)closeserial(parse->ppsfd); /* close separate PPS source */ /* * print statistics a last time and * stop statistics machine */ parse_statistics(parse); if (parse->parse_type->cl_end) { parse->parse_type->cl_end(parse); } /* * cleanup before leaving this world */ if (parse->binding) PARSE_END(parse); /* * Tell the I/O module to turn us off. We're history. */ io_closeclock(&parse->generic->io); free_varlist(parse->kv); NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ msyslog(LOG_INFO, "PARSE receiver #%d: reference clock \"%s\" removed", CLK_UNIT(parse->peer), parse->parse_type->cl_description); parse->peer = (struct peer *)0; /* unused now */ peer->procptr->unitptr = (caddr_t)0; free(parse); } #ifdef HAVE_PPSAPI /*---------------------------------------- * set up HARDPPS via PPSAPI */ static void parse_hardpps( struct parseunit *parse, int mode ) { if (parse->hardppsstate == mode) return; if (CLK_PPS(parse->peer) && (parse->flags & PARSE_PPSKERNEL)) { int i = 0; if (mode == PARSE_HARDPPS_ENABLE) { if (parse->flags & PARSE_CLEAR) i = PPS_CAPTURECLEAR; else i = PPS_CAPTUREASSERT; } if (time_pps_kcbind(parse->atom.handle, PPS_KC_HARDPPS, i, PPS_TSFMT_TSPEC) < 0) { msyslog(LOG_ERR, "PARSE receiver #%d: time_pps_kcbind failed: %m", CLK_UNIT(parse->peer)); } else { NLOG(NLOG_CLOCKINFO) msyslog(LOG_INFO, "PARSE receiver #%d: kernel PPS synchronisation %sabled", CLK_UNIT(parse->peer), (mode == PARSE_HARDPPS_ENABLE) ? "en" : "dis"); /* * tell the rest, that we have a kernel PPS source, iff we ever enable HARDPPS */ if (mode == PARSE_HARDPPS_ENABLE) hardpps_enable = 1; } } parse->hardppsstate = mode; } /*---------------------------------------- * set up PPS via PPSAPI */ static int parse_ppsapi( struct parseunit *parse ) { int cap, mode_ppsoffset; const char *cp; parse->flags &= (u_char) (~PARSE_PPSCLOCK); /* * collect PPSAPI offset capability - should move into generic handling */ if (time_pps_getcap(parse->atom.handle, &cap) < 0) { msyslog(LOG_ERR, "PARSE receiver #%d: parse_ppsapi: time_pps_getcap failed: %m", CLK_UNIT(parse->peer)); return 0; } /* * initialize generic PPSAPI interface * * we leave out CLK_FLAG3 as time_pps_kcbind() * is handled here for now. Ideally this should also * be part of the generic PPSAPI interface */ if (!refclock_params(parse->flags & (CLK_FLAG1|CLK_FLAG2|CLK_FLAG4), &parse->atom)) return 0; /* nb. only turn things on, if someone else has turned something * on before we get here, leave it alone! */ if (parse->flags & PARSE_CLEAR) { cp = "CLEAR"; mode_ppsoffset = PPS_OFFSETCLEAR; } else { cp = "ASSERT"; mode_ppsoffset = PPS_OFFSETASSERT; } msyslog(LOG_INFO, "PARSE receiver #%d: initializing PPS to %s", CLK_UNIT(parse->peer), cp); if (!(mode_ppsoffset & cap)) { msyslog(LOG_WARNING, "PARSE receiver #%d: Cannot set PPS_%sCLEAR, this will increase jitter (PPS API capabilities=0x%x)", CLK_UNIT(parse->peer), cp, cap); mode_ppsoffset = 0; } else { if (mode_ppsoffset == PPS_OFFSETCLEAR) { parse->atom.pps_params.clear_offset.tv_sec = (time_t)(-parse->ppsphaseadjust); parse->atom.pps_params.clear_offset.tv_nsec = (long)(-1e9*(parse->ppsphaseadjust - (double)(long)parse->ppsphaseadjust)); } if (mode_ppsoffset == PPS_OFFSETASSERT) { parse->atom.pps_params.assert_offset.tv_sec = (time_t)(-parse->ppsphaseadjust); parse->atom.pps_params.assert_offset.tv_nsec = (long)(-1e9*(parse->ppsphaseadjust - (double)(long)parse->ppsphaseadjust)); } } parse->atom.pps_params.mode |= mode_ppsoffset; if (time_pps_setparams(parse->atom.handle, &parse->atom.pps_params) < 0) { msyslog(LOG_ERR, "PARSE receiver #%d: FAILED set PPS parameters: %m", CLK_UNIT(parse->peer)); return 0; } parse->flags |= PARSE_PPSCLOCK; return 1; } #else #define parse_hardpps(_PARSE_, _MODE_) /* empty */ #endif /*-------------------------------------------------- * parse_start - open the PARSE devices and initialize data for processing */ static int parse_start( int sysunit, struct peer *peer ) { u_int unit; int fd232; #ifdef HAVE_TERMIOS struct termios tio; /* NEEDED FOR A LONG TIME ! */ #endif #ifdef HAVE_SYSV_TTYS struct termio tio; /* NEEDED FOR A LONG TIME ! */ #endif struct parseunit * parse; char parsedev[sizeof(PARSEDEVICE)+20]; char parseppsdev[sizeof(PARSEPPSDEVICE)+20]; parsectl_t tmp_ctl; u_int type; /* * get out Copyright information once */ if (!notice) { NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ msyslog(LOG_INFO, "NTP PARSE support: Copyright (c) 1989-2015, Frank Kardel"); notice = 1; } type = CLK_TYPE(peer); unit = CLK_UNIT(peer); if ((type == (u_int)~0) || (parse_clockinfo[type].cl_description == (char *)0)) { msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: unsupported clock type %d (max %d)", unit, CLK_REALTYPE(peer), ncltypes-1); return 0; } /* * Unit okay, attempt to open the device. */ (void) snprintf(parsedev, sizeof(parsedev), PARSEDEVICE, unit); (void) snprintf(parseppsdev, sizeof(parsedev), PARSEPPSDEVICE, unit); #ifndef O_NOCTTY #define O_NOCTTY 0 #endif #ifndef O_NONBLOCK #define O_NONBLOCK 0 #endif fd232 = tty_open(parsedev, O_RDWR | O_NOCTTY | O_NONBLOCK, 0777); if (fd232 == -1) { msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: open of %s failed: %m", unit, parsedev); return 0; } parse = emalloc_zero(sizeof(*parse)); parse->generic = peer->procptr; /* link up */ parse->generic->unitptr = (caddr_t)parse; /* link down */ /* * Set up the structures */ parse->generic->timestarted = current_time; parse->lastchange = current_time; parse->flags = 0; parse->pollneeddata = 0; parse->laststatistic = current_time; parse->lastformat = (unsigned short)~0; /* assume no format known */ parse->timedata.parse_status = (unsigned short)~0; /* be sure to mark initial status change */ parse->lastmissed = 0; /* assume got everything */ parse->ppsserial = 0; parse->ppsfd = -1; parse->localdata = (void *)0; parse->localstate = 0; parse->kv = (struct ctl_var *)0; clear_err(parse, ERR_ALL); parse->parse_type = &parse_clockinfo[type]; parse->maxunsync = parse->parse_type->cl_maxunsync; parse->generic->fudgetime1 = parse->parse_type->cl_basedelay; parse->generic->fudgetime2 = 0.0; parse->ppsphaseadjust = parse->generic->fudgetime2; parse->generic->clockdesc = parse->parse_type->cl_description; peer->rootdelay = parse->parse_type->cl_rootdelay; peer->sstclktype = parse->parse_type->cl_type; peer->precision = sys_precision; peer->stratum = STRATUM_REFCLOCK; if (peer->stratum <= 1) memmove((char *)&parse->generic->refid, parse->parse_type->cl_id, 4); else parse->generic->refid = htonl(PARSEHSREFID); parse->generic->io.fd = fd232; parse->peer = peer; /* marks it also as busy */ /* * configure terminal line */ if (TTY_GETATTR(fd232, &tio) == -1) { msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: tcgetattr(%d, &tio): %m", unit, fd232); parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ return 0; } else { #ifndef _PC_VDISABLE memset((char *)tio.c_cc, 0, sizeof(tio.c_cc)); #else int disablec; errno = 0; /* pathconf can deliver -1 without changing errno ! */ disablec = fpathconf(parse->generic->io.fd, _PC_VDISABLE); if (disablec == -1 && errno) { msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: fpathconf(fd, _PC_VDISABLE): %m", CLK_UNIT(parse->peer)); memset((char *)tio.c_cc, 0, sizeof(tio.c_cc)); /* best guess */ } else if (disablec != -1) memset((char *)tio.c_cc, disablec, sizeof(tio.c_cc)); #endif #if defined (VMIN) || defined(VTIME) if ((parse_clockinfo[type].cl_lflag & ICANON) == 0) { #ifdef VMIN tio.c_cc[VMIN] = 1; #endif #ifdef VTIME tio.c_cc[VTIME] = 0; #endif } #endif tio.c_cflag = (tcflag_t) parse_clockinfo[type].cl_cflag; tio.c_iflag = (tcflag_t) parse_clockinfo[type].cl_iflag; tio.c_oflag = (tcflag_t) parse_clockinfo[type].cl_oflag; tio.c_lflag = (tcflag_t) parse_clockinfo[type].cl_lflag; #ifdef HAVE_TERMIOS if ((cfsetospeed(&tio, (speed_t) parse_clockinfo[type].cl_speed) == -1) || (cfsetispeed(&tio, (speed_t) parse_clockinfo[type].cl_speed) == -1)) { msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: tcset{i,o}speed(&tio, speed): %m", unit); parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ return 0; } #else tio.c_cflag |= parse_clockinfo[type].cl_speed; #endif /* * set up pps device * if the PARSEPPSDEVICE can be opened that will be used * for PPS else PARSEDEVICE will be used */ parse->ppsfd = tty_open(parseppsdev, O_RDWR | O_NOCTTY | O_NONBLOCK, 0777); if (parse->ppsfd == -1) { parse->ppsfd = fd232; } /* * Linux PPS - the old way */ #if defined(HAVE_TIO_SERIAL_STUFF) /* Linux hack: define PPS interface */ { struct serial_struct ss; if (ioctl(parse->ppsfd, TIOCGSERIAL, &ss) < 0 || ( #ifdef ASYNC_LOW_LATENCY ss.flags |= ASYNC_LOW_LATENCY, #endif #ifndef HAVE_PPSAPI #ifdef ASYNC_PPS_CD_NEG ss.flags |= ASYNC_PPS_CD_NEG, #endif #endif ioctl(parse->ppsfd, TIOCSSERIAL, &ss)) < 0) { msyslog(LOG_NOTICE, "refclock_parse: TIOCSSERIAL fd %d, %m", parse->ppsfd); msyslog(LOG_NOTICE, "refclock_parse: optional PPS processing not available"); } else { parse->flags |= PARSE_PPSCLOCK; #ifdef ASYNC_PPS_CD_NEG NLOG(NLOG_CLOCKINFO) msyslog(LOG_INFO, "refclock_parse: PPS detection on"); #endif } } #endif /* * SUN the Solaris way */ #ifdef HAVE_TIOCSPPS /* SUN PPS support */ if (CLK_PPS(parse->peer)) { int i = 1; if (ioctl(parse->ppsfd, TIOCSPPS, (caddr_t)&i) == 0) { parse->flags |= PARSE_PPSCLOCK; } } #endif /* * PPS via PPSAPI */ #if defined(HAVE_PPSAPI) parse->hardppsstate = PARSE_HARDPPS_DISABLE; if (CLK_PPS(parse->peer)) { if (!refclock_ppsapi(parse->ppsfd, &parse->atom)) { msyslog(LOG_NOTICE, "PARSE receiver #%d: parse_start: could not set up PPS: %m", CLK_UNIT(parse->peer)); } else { parse_ppsapi(parse); } } #endif if (TTY_SETATTR(fd232, &tio) == -1) { msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: tcsetattr(%d, &tio): %m", unit, fd232); parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ return 0; } } /* * pick correct input machine */ parse->generic->io.srcclock = peer; parse->generic->io.datalen = 0; parse->binding = init_iobinding(parse); if (parse->binding == (bind_t *)0) { msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: io sub system initialisation failed.", CLK_UNIT(parse->peer)); parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ return 0; /* well, ok - special initialisation broke */ } parse->generic->io.clock_recv = parse->binding->bd_receive; /* pick correct receive routine */ parse->generic->io.io_input = parse->binding->bd_io_input; /* pick correct input routine */ /* * as we always(?) get 8 bit chars we want to be * sure, that the upper bits are zero for less * than 8 bit I/O - so we pass that information on. * note that there can be only one bit count format * per file descriptor */ switch (tio.c_cflag & CSIZE) { case CS5: tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS5; break; case CS6: tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS6; break; case CS7: tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS7; break; case CS8: tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS8; break; } if (!PARSE_SETCS(parse, &tmp_ctl)) { msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: parse_setcs() FAILED.", unit); parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ return 0; /* well, ok - special initialisation broke */ } strlcpy(tmp_ctl.parseformat.parse_buffer, parse->parse_type->cl_format, sizeof(tmp_ctl.parseformat.parse_buffer)); tmp_ctl.parseformat.parse_count = (u_short) strlen(tmp_ctl.parseformat.parse_buffer); if (!PARSE_SETFMT(parse, &tmp_ctl)) { msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: parse_setfmt() FAILED.", unit); parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ return 0; /* well, ok - special initialisation broke */ } /* * get rid of all IO accumulated so far */ #ifdef HAVE_TERMIOS (void) tcflush(parse->generic->io.fd, TCIOFLUSH); #else #if defined(TCFLSH) && defined(TCIOFLUSH) { int flshcmd = TCIOFLUSH; (void) ioctl(parse->generic->io.fd, TCFLSH, (caddr_t)&flshcmd); } #endif #endif /* * try to do any special initializations */ if (parse->parse_type->cl_init) { if (parse->parse_type->cl_init(parse)) { parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ return 0; /* well, ok - special initialisation broke */ } } /* * Insert in async io device list. */ if (!io_addclock(&parse->generic->io)) { msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: addclock %s fails (ABORT - clock type requires async io)", CLK_UNIT(parse->peer), parsedev); parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ return 0; } /* * print out configuration */ NLOG(NLOG_CLOCKINFO) { /* conditional if clause for conditional syslog */ msyslog(LOG_INFO, "PARSE receiver #%d: reference clock \"%s\" (I/O device %s, PPS device %s) added", CLK_UNIT(parse->peer), parse->parse_type->cl_description, parsedev, (parse->ppsfd != parse->generic->io.fd) ? parseppsdev : parsedev); msyslog(LOG_INFO, "PARSE receiver #%d: Stratum %d, trust time %s, precision %d", CLK_UNIT(parse->peer), parse->peer->stratum, l_mktime(parse->maxunsync), parse->peer->precision); msyslog(LOG_INFO, "PARSE receiver #%d: rootdelay %.6f s, phase adjustment %.6f s, PPS phase adjustment %.6f s, %s IO handling", CLK_UNIT(parse->peer), parse->parse_type->cl_rootdelay, parse->generic->fudgetime1, parse->ppsphaseadjust, parse->binding->bd_description); msyslog(LOG_INFO, "PARSE receiver #%d: Format recognition: %s", CLK_UNIT(parse->peer), parse->parse_type->cl_format); msyslog(LOG_INFO, "PARSE receiver #%d: %sPPS support%s", CLK_UNIT(parse->peer), CLK_PPS(parse->peer) ? "" : "NO ", CLK_PPS(parse->peer) ? #ifdef PPS_METHOD " (implementation " PPS_METHOD ")" #else "" #endif : "" ); } return 1; } /*-------------------------------------------------- * parse_ctl - process changes on flags/time values */ static void parse_ctl( struct parseunit *parse, const struct refclockstat *in ) { if (in) { if (in->haveflags & (CLK_HAVEFLAG1|CLK_HAVEFLAG2|CLK_HAVEFLAG3|CLK_HAVEFLAG4)) { u_char mask = CLK_FLAG1|CLK_FLAG2|CLK_FLAG3|CLK_FLAG4; parse->flags = (parse->flags & (u_char)(~mask)) | (in->flags & mask); #if defined(HAVE_PPSAPI) if (CLK_PPS(parse->peer)) { parse_ppsapi(parse); } #endif } if (in->haveflags & CLK_HAVETIME1) { parse->generic->fudgetime1 = in->fudgetime1; msyslog(LOG_INFO, "PARSE receiver #%d: new phase adjustment %.6f s", CLK_UNIT(parse->peer), parse->generic->fudgetime1); } if (in->haveflags & CLK_HAVETIME2) { parse->generic->fudgetime2 = in->fudgetime2; if (parse->flags & PARSE_TRUSTTIME) { parse->maxunsync = (u_long)ABS(in->fudgetime2); msyslog(LOG_INFO, "PARSE receiver #%d: new trust time %s", CLK_UNIT(parse->peer), l_mktime(parse->maxunsync)); } else { parse->ppsphaseadjust = in->fudgetime2; msyslog(LOG_INFO, "PARSE receiver #%d: new PPS phase adjustment %.6f s", CLK_UNIT(parse->peer), parse->ppsphaseadjust); #if defined(HAVE_PPSAPI) if (CLK_PPS(parse->peer)) { parse_ppsapi(parse); } #endif } } } } /*-------------------------------------------------- * parse_poll - called by the transmit procedure */ static void parse_poll( int unit, struct peer *peer ) { struct parseunit *parse = peer->procptr->unitptr; if (peer != parse->peer) { msyslog(LOG_ERR, "PARSE receiver #%d: poll: INTERNAL: peer incorrect", unit); return; } /* * Update clock stat counters */ parse->generic->polls++; if (parse->pollneeddata && ((int)(current_time - parse->pollneeddata) > (1<<(max(min(parse->peer->hpoll, parse->peer->ppoll), parse->peer->minpoll))))) { /* * start worrying when exceeding a poll inteval * bad news - didn't get a response last time */ parse->lastmissed = current_time; parse_event(parse, CEVNT_TIMEOUT); ERR(ERR_NODATA) msyslog(LOG_WARNING, "PARSE receiver #%d: no data from device within poll interval (check receiver / wiring)", CLK_UNIT(parse->peer)); } /* * we just mark that we want the next sample for the clock filter */ parse->pollneeddata = current_time; if (parse->parse_type->cl_poll) { parse->parse_type->cl_poll(parse); } cparse_statistics(parse); return; } #define LEN_STATES 300 /* length of state string */ /*-------------------------------------------------- * parse_control - set fudge factors, return statistics */ static void parse_control( int unit, const struct refclockstat *in, struct refclockstat *out, struct peer *peer ) { struct parseunit *parse = peer->procptr->unitptr; parsectl_t tmpctl; static char outstatus[400]; /* status output buffer */ if (out) { out->lencode = 0; out->p_lastcode = 0; out->kv_list = (struct ctl_var *)0; } if (!parse || !parse->peer) { msyslog(LOG_ERR, "PARSE receiver #%d: parse_control: unit invalid (UNIT INACTIVE)", unit); return; } unit = CLK_UNIT(parse->peer); /* * handle changes */ parse_ctl(parse, in); /* * supply data */ if (out) { u_long sum = 0; char *tt, *start; int i; outstatus[0] = '\0'; out->type = REFCLK_PARSE; /* * keep fudgetime2 in sync with TRUSTTIME/MAXUNSYNC flag1 */ parse->generic->fudgetime2 = (parse->flags & PARSE_TRUSTTIME) ? (double)parse->maxunsync : parse->ppsphaseadjust; /* * figure out skew between PPS and RS232 - just for informational * purposes */ if (PARSE_SYNC(parse->timedata.parse_state)) { if (PARSE_PPS(parse->timedata.parse_state) && PARSE_TIMECODE(parse->timedata.parse_state)) { l_fp off; /* * we have a PPS and RS232 signal - calculate the skew * WARNING: assumes on TIMECODE == PULSE (timecode after pulse) */ off = parse->timedata.parse_stime.fp; L_SUB(&off, &parse->timedata.parse_ptime.fp); /* true offset */ tt = add_var(&out->kv_list, 80, RO); snprintf(tt, 80, "refclock_ppsskew=%s", lfptoms(&off, 6)); } } if (PARSE_PPS(parse->timedata.parse_state)) { tt = add_var(&out->kv_list, 80, RO|DEF); snprintf(tt, 80, "refclock_ppstime=\"%s\"", gmprettydate(&parse->timedata.parse_ptime.fp)); } start = tt = add_var(&out->kv_list, 128, RO|DEF); tt = ap(start, 128, tt, "refclock_time=\""); if (parse->timedata.parse_time.fp.l_ui == 0) { tt = ap(start, 128, tt, "\""); } else { tt = ap(start, 128, tt, "%s\"", gmprettydate(&parse->timedata.parse_time.fp)); } if (!PARSE_GETTIMECODE(parse, &tmpctl)) { ERR(ERR_INTERNAL) msyslog(LOG_ERR, "PARSE receiver #%d: parse_control: parse_timecode() FAILED", unit); } else { start = tt = add_var(&out->kv_list, 512, RO|DEF); tt = ap(start, 512, tt, "refclock_status=\""); /* * copy PPS flags from last read transaction (informational only) */ tmpctl.parsegettc.parse_state |= parse->timedata.parse_state & (PARSEB_PPS|PARSEB_S_PPS); (void)parsestate(tmpctl.parsegettc.parse_state, tt, BUFFER_SIZES(start, tt, 512)); tt += strlen(tt); tt = ap(start, 512, tt, "\""); if (tmpctl.parsegettc.parse_count) mkascii(outstatus+strlen(outstatus), (int)(sizeof(outstatus)- strlen(outstatus) - 1), tmpctl.parsegettc.parse_buffer, (unsigned)(tmpctl.parsegettc.parse_count)); } tmpctl.parseformat.parse_format = tmpctl.parsegettc.parse_format; if (!PARSE_GETFMT(parse, &tmpctl)) { ERR(ERR_INTERNAL) msyslog(LOG_ERR, "PARSE receiver #%d: parse_control: parse_getfmt() FAILED", unit); } else { int count = tmpctl.parseformat.parse_count - 1; start = tt = add_var(&out->kv_list, 80, RO|DEF); tt = ap(start, 80, tt, "refclock_format=\""); if (count > 0) { tt = ap(start, 80, tt, "%*.*s", count, count, tmpctl.parseformat.parse_buffer); } tt = ap(start, 80, tt, "\""); } /* * gather state statistics */ start = tt = add_var(&out->kv_list, LEN_STATES, RO|DEF); tt = ap(start, LEN_STATES, tt, "refclock_states=\""); for (i = 0; i <= CEVNT_MAX; i++) { u_long s_time; u_long d = current_time - parse->generic->timestarted; u_long percent; percent = s_time = PARSE_STATETIME(parse, i); while (((u_long)(~0) / 10000) < percent) { percent /= 10; d /= 10; } if (d) percent = (percent * 10000) / d; else percent = 10000; if (s_time) { char item[80]; int count; snprintf(item, 80, "%s%s%s: %s (%d.%02d%%)", sum ? "; " : "", (parse->generic->currentstatus == i) ? "*" : "", clockstatus((unsigned int)i), l_mktime(s_time), (int)(percent / 100), (int)(percent % 100)); if ((count = (int) strlen(item)) < (LEN_STATES - 40 - (tt - start))) { tt = ap(start, LEN_STATES, tt, "%s", item); } sum += s_time; } } ap(start, LEN_STATES, tt, "; running time: %s\"", l_mktime(sum)); tt = add_var(&out->kv_list, 32, RO); snprintf(tt, 32, "refclock_id=\"%s\"", parse->parse_type->cl_id); tt = add_var(&out->kv_list, 80, RO); snprintf(tt, 80, "refclock_iomode=\"%s\"", parse->binding->bd_description); tt = add_var(&out->kv_list, 128, RO); snprintf(tt, 128, "refclock_driver_version=\"%s\"", rcsid); { struct ctl_var *k; k = parse->kv; while (k && !(k->flags & EOV)) { set_var(&out->kv_list, k->text, strlen(k->text)+1, k->flags); k++; } } out->lencode = (u_short) strlen(outstatus); out->p_lastcode = outstatus; } } /**=========================================================================== ** processing routines **/ /*-------------------------------------------------- * event handling - note that nominal events will also be posted * keep track of state dwelling times */ static void parse_event( struct parseunit *parse, int event ) { if (parse->generic->currentstatus != (u_char) event) { parse->statetime[parse->generic->currentstatus] += current_time - parse->lastchange; parse->lastchange = current_time; if (parse->parse_type->cl_event) parse->parse_type->cl_event(parse, event); if (event == CEVNT_NOMINAL) { NLOG(NLOG_CLOCKSTATUS) msyslog(LOG_INFO, "PARSE receiver #%d: SYNCHRONIZED", CLK_UNIT(parse->peer)); } refclock_report(parse->peer, event); } } /*-------------------------------------------------- * process a PARSE time sample */ static void parse_process( struct parseunit *parse, parsetime_t *parsetime ) { l_fp off, rectime, reftime; double fudge; /* silence warning: 'off.Ul_i.Xl_i' may be used uninitialized in this function */ ZERO(off); /* * check for changes in conversion status * (only one for each new status !) */ if (((parsetime->parse_status & CVT_MASK) != CVT_OK) && ((parsetime->parse_status & CVT_MASK) != CVT_NONE) && (parse->timedata.parse_status != parsetime->parse_status)) { char buffer[400]; NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ msyslog(LOG_WARNING, "PARSE receiver #%d: conversion status \"%s\"", CLK_UNIT(parse->peer), parsestatus(parsetime->parse_status, buffer, sizeof(buffer))); if ((parsetime->parse_status & CVT_MASK) == CVT_FAIL) { /* * tell more about the story - list time code * there is a slight change for a race condition and * the time code might be overwritten by the next packet */ parsectl_t tmpctl; if (!PARSE_GETTIMECODE(parse, &tmpctl)) { ERR(ERR_INTERNAL) msyslog(LOG_ERR, "PARSE receiver #%d: parse_process: parse_timecode() FAILED", CLK_UNIT(parse->peer)); } else { ERR(ERR_BADDATA) msyslog(LOG_WARNING, "PARSE receiver #%d: FAILED TIMECODE: \"%s\" (check receiver configuration / wiring)", CLK_UNIT(parse->peer), mkascii(buffer, sizeof buffer, tmpctl.parsegettc.parse_buffer, (unsigned)(tmpctl.parsegettc.parse_count - 1))); } /* copy status to show only changes in case of failures */ parse->timedata.parse_status = parsetime->parse_status; } } /* * examine status and post appropriate events */ if ((parsetime->parse_status & CVT_MASK) != CVT_OK) { /* * got bad data - tell the rest of the system */ switch (parsetime->parse_status & CVT_MASK) { case CVT_NONE: if ((parsetime->parse_status & CVT_ADDITIONAL) && parse->parse_type->cl_message) parse->parse_type->cl_message(parse, parsetime); /* * save PPS information that comes piggyback */ if (PARSE_PPS(parsetime->parse_state)) { parse->timedata.parse_state |= PARSEB_PPS|PARSEB_S_PPS; parse->timedata.parse_ptime = parsetime->parse_ptime; } break; /* well, still waiting - timeout is handled at higher levels */ case CVT_FAIL: if (parsetime->parse_status & CVT_BADFMT) { parse_event(parse, CEVNT_BADREPLY); } else if (parsetime->parse_status & CVT_BADDATE) { parse_event(parse, CEVNT_BADDATE); } else if (parsetime->parse_status & CVT_BADTIME) { parse_event(parse, CEVNT_BADTIME); } else { parse_event(parse, CEVNT_BADREPLY); /* for the lack of something better */ } } return; /* skip the rest - useless */ } /* * check for format changes * (in case somebody has swapped clocks 8-) */ if (parse->lastformat != parsetime->parse_format) { parsectl_t tmpctl; tmpctl.parseformat.parse_format = parsetime->parse_format; if (!PARSE_GETFMT(parse, &tmpctl)) { ERR(ERR_INTERNAL) msyslog(LOG_ERR, "PARSE receiver #%d: parse_getfmt() FAILED", CLK_UNIT(parse->peer)); } else { NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ msyslog(LOG_INFO, "PARSE receiver #%d: packet format \"%s\"", CLK_UNIT(parse->peer), tmpctl.parseformat.parse_buffer); } parse->lastformat = parsetime->parse_format; } /* * now, any changes ? */ if ((parse->timedata.parse_state ^ parsetime->parse_state) & ~(unsigned)(PARSEB_PPS|PARSEB_S_PPS)) { char tmp1[200]; char tmp2[200]; /* * something happend - except for PPS events */ (void) parsestate(parsetime->parse_state, tmp1, sizeof(tmp1)); (void) parsestate(parse->timedata.parse_state, tmp2, sizeof(tmp2)); NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ msyslog(LOG_INFO,"PARSE receiver #%d: STATE CHANGE: %s -> %s", CLK_UNIT(parse->peer), tmp2, tmp1); } /* * carry on PPS information if still usable */ if (PARSE_PPS(parse->timedata.parse_state) && !PARSE_PPS(parsetime->parse_state)) { parsetime->parse_state |= PARSEB_PPS|PARSEB_S_PPS; parsetime->parse_ptime = parse->timedata.parse_ptime; } /* * remember for future */ parse->timedata = *parsetime; /* * check to see, whether the clock did a complete powerup or lost PZF signal * and post correct events for current condition */ if (PARSE_POWERUP(parsetime->parse_state)) { /* * this is bad, as we have completely lost synchronisation * well this is a problem with the receiver here * for PARSE Meinberg DCF77 receivers the lost synchronisation * is true as it is the powerup state and the time is taken * from a crude real time clock chip * for the PZF/GPS series this is only partly true, as * PARSE_POWERUP only means that the pseudo random * phase shift sequence cannot be found. this is only * bad, if we have never seen the clock in the SYNC * state, where the PHASE and EPOCH are correct. * for reporting events the above business does not * really matter, but we can use the time code * even in the POWERUP state after having seen * the clock in the synchronized state (PZF class * receivers) unless we have had a telegram disruption * after having seen the clock in the SYNC state. we * thus require having seen the clock in SYNC state * *after* having missed telegrams (noresponse) from * the clock. one problem remains: we might use erroneously * POWERUP data if the disruption is shorter than 1 polling * interval. fortunately powerdowns last usually longer than 64 * seconds and the receiver is at least 2 minutes in the * POWERUP or NOSYNC state before switching to SYNC * for GPS receivers this can mean antenna problems and other causes. * the additional grace period can be enables by a clock * mode having the PARSE_F_POWERUPTRUST flag in cl_flag set. */ parse_event(parse, CEVNT_FAULT); NLOG(NLOG_CLOCKSTATUS) ERR(ERR_BADSTATUS) msyslog(LOG_ERR,"PARSE receiver #%d: NOT SYNCHRONIZED/RECEIVER PROBLEMS", CLK_UNIT(parse->peer)); } else { /* * we have two states left * * SYNC: * this state means that the EPOCH (timecode) and PHASE * information has be read correctly (at least two * successive PARSE timecodes were received correctly) * this is the best possible state - full trust * * NOSYNC: * The clock should be on phase with respect to the second * signal, but the timecode has not been received correctly within * at least the last two minutes. this is a sort of half baked state * for PARSE Meinberg DCF77 clocks this is bad news (clock running * without timecode confirmation) * PZF 535 has also no time confirmation, but the phase should be * very precise as the PZF signal can be decoded */ if (PARSE_SYNC(parsetime->parse_state)) { /* * currently completely synchronized - best possible state */ parse->lastsync = current_time; clear_err(parse, ERR_BADSTATUS); } else { /* * we have had some problems receiving the time code */ parse_event(parse, CEVNT_PROP); NLOG(NLOG_CLOCKSTATUS) ERR(ERR_BADSTATUS) msyslog(LOG_ERR,"PARSE receiver #%d: TIMECODE NOT CONFIRMED", CLK_UNIT(parse->peer)); } } fudge = parse->generic->fudgetime1; /* standard RS232 Fudgefactor */ if (PARSE_TIMECODE(parsetime->parse_state)) { rectime = parsetime->parse_stime.fp; off = reftime = parsetime->parse_time.fp; L_SUB(&off, &rectime); /* prepare for PPS adjustments logic */ #ifdef DEBUG if (debug > 3) printf("PARSE receiver #%d: Reftime %s, Recvtime %s - initial offset %s\n", CLK_UNIT(parse->peer), prettydate(&reftime), prettydate(&rectime), lfptoa(&off,6)); #endif } if (PARSE_PPS(parsetime->parse_state) && CLK_PPS(parse->peer)) { l_fp offset; double ppsphaseadjust = parse->ppsphaseadjust; #ifdef HAVE_PPSAPI /* * set fudge = 0.0 if already included in PPS time stamps */ if (parse->atom.pps_params.mode & (PPS_OFFSETCLEAR|PPS_OFFSETASSERT)) { ppsphaseadjust = 0.0; } #endif /* * we have a PPS signal - much better than the RS232 stuff (we hope) */ offset = parsetime->parse_ptime.fp; #ifdef DEBUG if (debug > 3) printf("PARSE receiver #%d: PPStime %s\n", CLK_UNIT(parse->peer), prettydate(&offset)); #endif if (PARSE_TIMECODE(parsetime->parse_state)) { if (M_ISGEQ(off.l_i, off.l_uf, -1, 0x80000000) && M_ISGEQ(0, 0x7fffffff, off.l_i, off.l_uf)) { fudge = ppsphaseadjust; /* pick PPS fudge factor */ /* * RS232 offsets within [-0.5..0.5[ - take PPS offsets */ if (parse->parse_type->cl_flags & PARSE_F_PPSONSECOND) { reftime = off = offset; if (reftime.l_uf & 0x80000000) reftime.l_ui++; reftime.l_uf = 0; /* * implied on second offset */ off.l_uf = ~off.l_uf; /* map [0.5..1[ -> [-0.5..0[ */ off.l_i = (off.l_uf & 0x80000000) ? -1 : 0; /* sign extend */ } else { /* * time code describes pulse */ reftime = off = parsetime->parse_time.fp; L_SUB(&off, &offset); /* true offset */ } } /* * take RS232 offset when PPS when out of bounds */ } else { fudge = ppsphaseadjust; /* pick PPS fudge factor */ /* * Well, no time code to guide us - assume on second pulse * and pray, that we are within [-0.5..0.5[ */ off = offset; reftime = offset; if (reftime.l_uf & 0x80000000) reftime.l_ui++; reftime.l_uf = 0; /* * implied on second offset */ off.l_uf = ~off.l_uf; /* map [0.5..1[ -> [-0.5..0[ */ off.l_i = (off.l_uf & 0x80000000) ? -1 : 0; /* sign extend */ } } else { if (!PARSE_TIMECODE(parsetime->parse_state)) { /* * Well, no PPS, no TIMECODE, no more work ... */ if ((parsetime->parse_status & CVT_ADDITIONAL) && parse->parse_type->cl_message) parse->parse_type->cl_message(parse, parsetime); return; } } #ifdef DEBUG if (debug > 3) printf("PARSE receiver #%d: Reftime %s, Recvtime %s - final offset %s\n", CLK_UNIT(parse->peer), prettydate(&reftime), prettydate(&rectime), lfptoa(&off,6)); #endif rectime = reftime; L_SUB(&rectime, &off); /* just to keep the ntp interface happy */ #ifdef DEBUG if (debug > 3) printf("PARSE receiver #%d: calculated Reftime %s, Recvtime %s\n", CLK_UNIT(parse->peer), prettydate(&reftime), prettydate(&rectime)); #endif if ((parsetime->parse_status & CVT_ADDITIONAL) && parse->parse_type->cl_message) parse->parse_type->cl_message(parse, parsetime); if (PARSE_SYNC(parsetime->parse_state)) { /* * log OK status */ parse_event(parse, CEVNT_NOMINAL); } clear_err(parse, ERR_BADIO); clear_err(parse, ERR_BADDATA); clear_err(parse, ERR_NODATA); clear_err(parse, ERR_INTERNAL); /* * and now stick it into the clock machine * samples are only valid iff lastsync is not too old and * we have seen the clock in sync at least once * after the last time we didn't see an expected data telegram * at startup being not in sync is also bad just like * POWERUP state unless PARSE_F_POWERUPTRUST is set * see the clock states section above for more reasoning */ if (((current_time - parse->lastsync) > parse->maxunsync) || (parse->lastsync < parse->lastmissed) || ((parse->lastsync == 0) && !PARSE_SYNC(parsetime->parse_state)) || (((parse->parse_type->cl_flags & PARSE_F_POWERUPTRUST) == 0) && PARSE_POWERUP(parsetime->parse_state))) { parse->generic->leap = LEAP_NOTINSYNC; parse->lastsync = 0; /* wait for full sync again */ } else { if (PARSE_LEAPADD(parsetime->parse_state)) { /* * we pick this state also for time code that pass leap warnings * without direction information (as earth is currently slowing * down). */ parse->generic->leap = (parse->flags & PARSE_LEAP_DELETE) ? LEAP_DELSECOND : LEAP_ADDSECOND; } else if (PARSE_LEAPDEL(parsetime->parse_state)) { parse->generic->leap = LEAP_DELSECOND; } else { parse->generic->leap = LEAP_NOWARNING; } } if (parse->generic->leap != LEAP_NOTINSYNC) { /* * only good/trusted samples are interesting */ #ifdef DEBUG if (debug > 2) { printf("PARSE receiver #%d: refclock_process_offset(reftime=%s, rectime=%s, Fudge=%f)\n", CLK_UNIT(parse->peer), prettydate(&reftime), prettydate(&rectime), fudge); } #endif parse->generic->lastref = reftime; refclock_process_offset(parse->generic, reftime, rectime, fudge); #ifdef HAVE_PPSAPI /* * pass PPS information on to PPS clock */ if (PARSE_PPS(parsetime->parse_state) && CLK_PPS(parse->peer)) { parse->peer->flags |= (FLAG_PPS | FLAG_TSTAMP_PPS); parse_hardpps(parse, PARSE_HARDPPS_ENABLE); } #endif } else { parse_hardpps(parse, PARSE_HARDPPS_DISABLE); parse->peer->flags &= ~(FLAG_PPS | FLAG_TSTAMP_PPS); } /* * ready, unless the machine wants a sample or * we are in fast startup mode (peer->dist > MAXDISTANCE) */ if (!parse->pollneeddata && parse->peer->disp <= MAXDISTANCE) return; parse->pollneeddata = 0; parse->timedata.parse_state &= ~(unsigned)(PARSEB_PPS|PARSEB_S_PPS); refclock_receive(parse->peer); } /**=========================================================================== ** special code for special clocks **/ static void mk_utcinfo( char *t, /* pointer to the output string buffer */ uint16_t wnt, uint16_t wnlsf, int dn, int dtls, int dtlsf, int size /* size of the output string buffer */ ) { /* * The week number transmitted by the GPS satellites for the leap date * is truncated to 8 bits only. If the nearest leap second date is off * the current date by more than +/- 128 weeks then conversion to a * calendar date is ambiguous. On the other hand, if a leap second is * currently being announced (i.e. dtlsf != dtls) then the week number * wnlsf is close enough, and we can unambiguously determine the date * for which the leap second is scheduled. */ if ( dtlsf != dtls ) { time_t t_ls; struct tm *tm; int nc; if (wnlsf < GPSWRAP) wnlsf += GPSWEEKS; /* 'wnt' not used here: would need the same treatment as 'wnlsf */ t_ls = (time_t) wnlsf * SECSPERWEEK + (time_t) dn * SECSPERDAY + GPS_SEC_BIAS - 1; tm = gmtime( &t_ls ); if (tm == NULL) /* gmtime() failed */ { snprintf( t, size, "** (gmtime() failed in mk_utcinfo())" ); return; } nc = snprintf( t, size, "UTC offset transition from %is to %is due to leap second %s", dtls, dtlsf, ( dtls < dtlsf ) ? "insertion" : "deletion" ); if (nc < 0) nc = strlen(t); else if (nc > size) nc = size; snprintf( t + nc, size - nc, " at UTC midnight at the end of %s, %04i-%02i-%02i", daynames[tm->tm_wday], tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday ); } else { snprintf( t, size, "UTC offset parameter: %is, no leap second announced.\n", dtls ); } } #ifdef CLOCK_MEINBERG /**=========================================================================== ** Meinberg GPS receiver support **/ /*------------------------------------------------------------ * gps16x_message - process messages from Meinberg GPS receiver */ static void gps16x_message( struct parseunit *parse, parsetime_t *parsetime ) { if (parse->timedata.parse_msglen && parsetime->parse_msg[0] == SOH) { GPS_MSG_HDR header; unsigned char *bufp = (unsigned char *)parsetime->parse_msg + 1; #ifdef DEBUG if (debug > 2) { char msgbuffer[600]; mkreadable(msgbuffer, sizeof(msgbuffer), (char *)parsetime->parse_msg, parsetime->parse_msglen, 1); printf("PARSE receiver #%d: received message (%d bytes) >%s<\n", CLK_UNIT(parse->peer), parsetime->parse_msglen, msgbuffer); } #endif get_mbg_header(&bufp, &header); if (header.hdr_csum == mbg_csum(parsetime->parse_msg + 1, 6) && (header.len == 0 || (header.len < sizeof(parsetime->parse_msg) && header.data_csum == mbg_csum(bufp, header.len)))) { /* * clean message */ switch (header.cmd) { case GPS_SW_REV: { char buffer[64]; SW_REV gps_sw_rev; get_mbg_sw_rev(&bufp, &gps_sw_rev); snprintf(buffer, sizeof(buffer), "meinberg_gps_version=\"%x.%02x%s%s\"", (gps_sw_rev.code >> 8) & 0xFF, gps_sw_rev.code & 0xFF, gps_sw_rev.name[0] ? " " : "", gps_sw_rev.name); set_var(&parse->kv, buffer, strlen(buffer)+1, RO|DEF); } break; case GPS_BVAR_STAT: { static struct state { BVAR_STAT flag; /* status flag */ const char *string; /* bit name */ } states[] = { { BVAR_CFGH_INVALID, "Configuration/Health" }, { BVAR_ALM_NOT_COMPLETE, "Almanachs" }, { BVAR_UTC_INVALID, "UTC Correction" }, { BVAR_IONO_INVALID, "Ionospheric Correction" }, { BVAR_RCVR_POS_INVALID, "Receiver Position" }, { 0, "" } }; BVAR_STAT status; struct state *s = states; char buffer[512]; char *p, *b; status = (BVAR_STAT) get_lsb_short(&bufp); p = b = buffer; p = ap(buffer, sizeof(buffer), p, "meinberg_gps_status=\"[0x%04x] ", status); if (status) { p = ap(buffer, sizeof(buffer), p, "incomplete buffered data: "); b = p; while (s->flag) { if (status & s->flag) { if (p != b) { p = ap(buffer, sizeof(buffer), p, ", "); } p = ap(buffer, sizeof(buffer), p, "%s", (const char *)s->string); } s++; } p = ap(buffer, sizeof(buffer), p, "\""); } else { p = ap(buffer, sizeof(buffer), p, "\""); } set_var(&parse->kv, buffer, strlen(buffer)+1, RO|DEF); } break; case GPS_POS_XYZ: { XYZ xyz; char buffer[256]; get_mbg_xyz(&bufp, xyz); snprintf(buffer, sizeof(buffer), "gps_position(XYZ)=\"%s m, %s m, %s m\"", mfptoa(xyz[XP].l_ui, xyz[XP].l_uf, 1), mfptoa(xyz[YP].l_ui, xyz[YP].l_uf, 1), mfptoa(xyz[ZP].l_ui, xyz[ZP].l_uf, 1)); set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); } break; case GPS_POS_LLA: { LLA lla; char buffer[256]; get_mbg_lla(&bufp, lla); snprintf(buffer, sizeof(buffer), "gps_position(LLA)=\"%s deg, %s deg, %s m\"", mfptoa(lla[LAT].l_ui, lla[LAT].l_uf, 4), mfptoa(lla[LON].l_ui, lla[LON].l_uf, 4), mfptoa(lla[ALT].l_ui, lla[ALT].l_uf, 1)); set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); } break; case GPS_TZDL: break; case GPS_PORT_PARM: break; case GPS_SYNTH: break; case GPS_ANT_INFO: { ANT_INFO antinfo; char buffer[512]; char *p, *q; get_mbg_antinfo(&bufp, &antinfo); p = buffer; p = ap(buffer, sizeof(buffer), p, "meinberg_antenna_status=\""); switch (antinfo.status) { case ANT_INVALID: // No other fields valid since antenna has not yet been disconnected p = ap(buffer, sizeof(buffer), p, ""); break; case ANT_DISCONN: // Antenna is disconnected, tm_reconn and delta_t not yet set q = ap(buffer, sizeof(buffer), p, "DISCONNECTED since "); NLOG(NLOG_CLOCKSTATUS) ERR(ERR_BADSTATUS) msyslog(LOG_ERR,"PARSE receiver #%d: ANTENNA FAILURE: %s", CLK_UNIT(parse->peer), p); p = q; mbg_tm_str(&p, &antinfo.tm_disconn, BUFFER_SIZE(buffer, p), 0); *p = '\0'; break; case ANT_RECONN: // Antenna had been disconnect, but receiver sync. after reconnect, so all fields valid p = ap(buffer, sizeof(buffer), p, "SYNC AFTER RECONNECT on "); mbg_tm_str(&p, &antinfo.tm_reconn, BUFFER_SIZE(buffer, p), 0); p = ap(buffer, sizeof(buffer), p, ", clock offset at reconnect %c%ld.%07ld s, disconnect time ", (antinfo.delta_t < 0) ? '-' : '+', (long) ABS(antinfo.delta_t) / 10000, (long) ABS(antinfo.delta_t) % 10000); mbg_tm_str(&p, &antinfo.tm_disconn, BUFFER_SIZE(buffer, p), 0); *p = '\0'; break; default: p = ap(buffer, sizeof(buffer), p, "bad status 0x%04x", antinfo.status); break; } p = ap(buffer, sizeof(buffer), p, "\""); set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); } break; case GPS_UCAP: break; case GPS_CFGH: { CFGH cfgh; char buffer[512]; char *p; get_mbg_cfgh(&bufp, &cfgh); if (cfgh.valid) { const char *cp; uint16_t tmp_val; int i; p = buffer; p = ap(buffer, sizeof(buffer), p, "gps_tot_51=\""); mbg_tgps_str(&p, &cfgh.tot_51, BUFFER_SIZE(buffer, p)); p = ap(buffer, sizeof(buffer), p, "\""); set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); p = buffer; p = ap(buffer, sizeof(buffer), p, "gps_tot_63=\""); mbg_tgps_str(&p, &cfgh.tot_63, BUFFER_SIZE(buffer, p)); p = ap(buffer, sizeof(buffer), p, "\""); set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); p = buffer; p = ap(buffer, sizeof(buffer), p, "gps_t0a=\""); mbg_tgps_str(&p, &cfgh.t0a, BUFFER_SIZE(buffer, p)); p = ap(buffer, sizeof(buffer), p, "\""); set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); for (i = 0; i < N_SVNO_GPS; i++) { p = buffer; p = ap(buffer, sizeof(buffer), p, "sv_info[%d]=\"PRN%d", i, i + N_SVNO_GPS); tmp_val = cfgh.health[i]; /* a 6 bit SV health code */ p = ap(buffer, sizeof(buffer), p, "; health=0x%02x (", tmp_val); /* "All Ones" has a special meaning" */ if (tmp_val == 0x3F) /* satellite is unusable or doesn't even exist */ cp = "SV UNAVAILABLE"; else { /* The MSB contains a summary of the 3 MSBs of the 8 bit health code, * indicating if the data sent by the satellite is OK or not. */ p = ap(buffer, sizeof(buffer), p, "DATA %s, ", (tmp_val & 0x20) ? "BAD" : "OK" ); /* The 5 LSBs contain the status of the different signals sent by the satellite. */ switch (tmp_val & 0x1F) { case 0x00: cp = "SIGNAL OK"; break; /* codes 0x01 through 0x1B indicate that one or more * specific signal components are weak or dead. * We don't decode this here in detail. */ case 0x1C: cp = "SV IS TEMP OUT"; break; case 0x1D: cp = "SV WILL BE TEMP OUT"; break; default: cp = "TRANSMISSION PROBLEMS"; break; } } p = ap(buffer, sizeof(buffer), p, "%s)", cp ); tmp_val = cfgh.cfg[i]; /* a 4 bit SV configuration/type code */ p = ap(buffer, sizeof(buffer), p, "; cfg=0x%02x (", tmp_val); switch (tmp_val & 0x7) { case 0x00: cp = "(reserved)"; break; case 0x01: cp = "BLOCK II/IIA/IIR"; break; case 0x02: cp = "BLOCK IIR-M"; break; case 0x03: cp = "BLOCK IIF"; break; case 0x04: cp = "BLOCK III"; break; default: cp = "unknown SV type"; break; } p = ap(buffer, sizeof(buffer), p, "%s", cp ); if (tmp_val & 0x08) /* A-S is on, P-code is encrypted */ p = ap( buffer, sizeof(buffer), p, ", A-S on" ); p = ap(buffer, sizeof(buffer), p, ")\""); set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); } } } break; case GPS_ALM: break; case GPS_EPH: break; case GPS_UTC: { UTC utc; char buffer[512]; char *p; p = buffer; get_mbg_utc(&bufp, &utc); if (utc.valid) { p = ap(buffer, sizeof(buffer), p, "gps_utc_correction=\""); mk_utcinfo(p, utc.t0t.wn, utc.WNlsf, utc.DNt, utc.delta_tls, utc.delta_tlsf, BUFFER_SIZE(buffer, p)); p += strlen(p); p = ap(buffer, sizeof(buffer), p, "\""); } else { p = ap(buffer, sizeof(buffer), p, "gps_utc_correction=\"\""); } set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); } break; case GPS_IONO: break; case GPS_ASCII_MSG: { ASCII_MSG gps_ascii_msg; char buffer[128]; get_mbg_ascii_msg(&bufp, &gps_ascii_msg); if (gps_ascii_msg.valid) { char buffer1[128]; mkreadable(buffer1, sizeof(buffer1), gps_ascii_msg.s, strlen(gps_ascii_msg.s), (int)0); snprintf(buffer, sizeof(buffer), "gps_message=\"%s\"", buffer1); } else snprintf(buffer, sizeof(buffer), "gps_message="); set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); } break; default: break; } } else { msyslog(LOG_DEBUG, "PARSE receiver #%d: gps16x_message: message checksum error: hdr_csum = 0x%x (expected 0x%x), " "data_len = %d, data_csum = 0x%x (expected 0x%x)", CLK_UNIT(parse->peer), header.hdr_csum, mbg_csum(parsetime->parse_msg + 1, 6), header.len, header.data_csum, mbg_csum(bufp, (unsigned)((header.len < sizeof(parsetime->parse_msg)) ? header.len : 0))); } } return; } /*------------------------------------------------------------ * gps16x_poll - query the reciver peridically */ static void gps16x_poll( struct peer *peer ) { struct parseunit *parse = peer->procptr->unitptr; static GPS_MSG_HDR sequence[] = { { GPS_SW_REV, 0, 0, 0 }, { GPS_BVAR_STAT, 0, 0, 0 }, { GPS_UTC, 0, 0, 0 }, { GPS_ASCII_MSG, 0, 0, 0 }, { GPS_ANT_INFO, 0, 0, 0 }, { GPS_CFGH, 0, 0, 0 }, { GPS_POS_XYZ, 0, 0, 0 }, { GPS_POS_LLA, 0, 0, 0 }, { (unsigned short)~0, 0, 0, 0 } }; int rtc; unsigned char cmd_buffer[64]; unsigned char *outp = cmd_buffer; GPS_MSG_HDR *header; if (((poll_info_t *)parse->parse_type->cl_data)->rate) { parse->peer->procptr->nextaction = current_time + ((poll_info_t *)parse->parse_type->cl_data)->rate; } if (sequence[parse->localstate].cmd == (unsigned short)~0) parse->localstate = 0; header = sequence + parse->localstate++; *outp++ = SOH; /* start command */ put_mbg_header(&outp, header); outp = cmd_buffer + 1; header->hdr_csum = (short)mbg_csum(outp, 6); put_mbg_header(&outp, header); #ifdef DEBUG if (debug > 2) { char buffer[128]; mkreadable(buffer, sizeof(buffer), (char *)cmd_buffer, (unsigned)(outp - cmd_buffer), 1); printf("PARSE receiver #%d: transmitted message #%ld (%d bytes) >%s<\n", CLK_UNIT(parse->peer), parse->localstate - 1, (int)(outp - cmd_buffer), buffer); } #endif rtc = (int) write(parse->generic->io.fd, cmd_buffer, (unsigned long)(outp - cmd_buffer)); if (rtc < 0) { ERR(ERR_BADIO) msyslog(LOG_ERR, "PARSE receiver #%d: gps16x_poll: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); } else if (rtc != outp - cmd_buffer) { ERR(ERR_BADIO) msyslog(LOG_ERR, "PARSE receiver #%d: gps16x_poll: failed to send cmd incomplete (%d of %d bytes sent)", CLK_UNIT(parse->peer), rtc, (int)(outp - cmd_buffer)); } clear_err(parse, ERR_BADIO); return; } /*-------------------------------------------------- * init routine - setup timer */ static int gps16x_poll_init( struct parseunit *parse ) { if (((poll_info_t *)parse->parse_type->cl_data)->rate) { parse->peer->procptr->action = gps16x_poll; gps16x_poll(parse->peer); } return 0; } #else static void gps16x_message( struct parseunit *parse, parsetime_t *parsetime ) {} static int gps16x_poll_init( struct parseunit *parse ) { return 1; } #endif /* CLOCK_MEINBERG */ /**=========================================================================== ** clock polling support **/ /*-------------------------------------------------- * direct poll routine */ static void poll_dpoll( struct parseunit *parse ) { long rtc; const char *ps = ((poll_info_t *)parse->parse_type->cl_data)->string; long ct = ((poll_info_t *)parse->parse_type->cl_data)->count; rtc = write(parse->generic->io.fd, ps, ct); if (rtc < 0) { ERR(ERR_BADIO) msyslog(LOG_ERR, "PARSE receiver #%d: poll_dpoll: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); } else if (rtc != ct) { ERR(ERR_BADIO) msyslog(LOG_ERR, "PARSE receiver #%d: poll_dpoll: failed to send cmd incomplete (%ld of %ld bytes sent)", CLK_UNIT(parse->peer), rtc, ct); } clear_err(parse, ERR_BADIO); } /*-------------------------------------------------- * periodic poll routine */ static void poll_poll( struct peer *peer ) { struct parseunit *parse = peer->procptr->unitptr; if (parse->parse_type->cl_poll) parse->parse_type->cl_poll(parse); if (((poll_info_t *)parse->parse_type->cl_data)->rate) { parse->peer->procptr->nextaction = current_time + ((poll_info_t *)parse->parse_type->cl_data)->rate; } } /*-------------------------------------------------- * init routine - setup timer */ static int poll_init( struct parseunit *parse ) { if (((poll_info_t *)parse->parse_type->cl_data)->rate) { parse->peer->procptr->action = poll_poll; poll_poll(parse->peer); } return 0; } /**=========================================================================== ** Trimble support **/ /*------------------------------------------------------------- * trimble TAIP init routine - setup EOL and then do poll_init. */ static int trimbletaip_init( struct parseunit *parse ) { #ifdef HAVE_TERMIOS struct termios tio; #endif #ifdef HAVE_SYSV_TTYS struct termio tio; #endif /* * configure terminal line for trimble receiver */ if (TTY_GETATTR(parse->generic->io.fd, &tio) == -1) { msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_init: tcgetattr(fd, &tio): %m", CLK_UNIT(parse->peer)); return 0; } else { tio.c_cc[VEOL] = TRIMBLETAIP_EOL; if (TTY_SETATTR(parse->generic->io.fd, &tio) == -1) { msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_init: tcsetattr(fd, &tio): %m", CLK_UNIT(parse->peer)); return 0; } } return poll_init(parse); } /*-------------------------------------------------- * trimble TAIP event routine - reset receiver upon data format trouble */ static const char *taipinit[] = { ">FPV00000000<", ">SRM;ID_FLAG=F;CS_FLAG=T;EC_FLAG=F;FR_FLAG=T;CR_FLAG=F<", ">FTM00020001<", (char *)0 }; static void trimbletaip_event( struct parseunit *parse, int event ) { switch (event) { case CEVNT_BADREPLY: /* reset on garbled input */ case CEVNT_TIMEOUT: /* reset on no input */ { const char **iv; iv = taipinit; while (*iv) { int rtc = (int) write(parse->generic->io.fd, *iv, strlen(*iv)); if (rtc < 0) { msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_event: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); return; } else { if (rtc != (int)strlen(*iv)) { msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_event: failed to send cmd incomplete (%d of %d bytes sent)", CLK_UNIT(parse->peer), rtc, (int)strlen(*iv)); return; } } iv++; } NLOG(NLOG_CLOCKINFO) ERR(ERR_BADIO) msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_event: RECEIVER INITIALIZED", CLK_UNIT(parse->peer)); } break; default: /* ignore */ break; } } /* * This driver supports the Trimble SVee Six Plus GPS receiver module. * It should support other Trimble receivers which use the Trimble Standard * Interface Protocol (see below). * * The module has a serial I/O port for command/data and a 1 pulse-per-second * output, about 1 microsecond wide. The leading edge of the pulse is * coincident with the change of the GPS second. This is the same as * the change of the UTC second +/- ~1 microsecond. Some other clocks * specifically use a feature in the data message as a timing reference, but * the SVee Six Plus does not do this. In fact there is considerable jitter * on the timing of the messages, so this driver only supports the use * of the PPS pulse for accurate timing. Where it is determined that * the offset is way off, when first starting up ntpd for example, * the timing of the data stream is used until the offset becomes low enough * (|offset| < CLOCK_MAX), at which point the pps offset is used. * * It can use either option for receiving PPS information - the 'ppsclock' * stream pushed onto the serial data interface to timestamp the Carrier * Detect interrupts, where the 1PPS connects to the CD line. This only * works on SunOS 4.1.x currently. To select this, define PPSPPS in * Config.local. The other option is to use a pulse-stretcher/level-converter * to convert the PPS pulse into a RS232 start pulse & feed this into another * tty port. To use this option, define PPSCLK in Config.local. The pps input, * by whichever method, is handled in ntp_loopfilter.c * * The receiver uses a serial message protocol called Trimble Standard * Interface Protocol (it can support others but this driver only supports * TSIP). Messages in this protocol have the following form: * * ... ... * * Any bytes within the portion of value 10 hex () are doubled * on transmission and compressed back to one on reception. Otherwise * the values of data bytes can be anything. The serial interface is RS-422 * asynchronous using 9600 baud, 8 data bits with odd party (**note** 9 bits * in total!), and 1 stop bit. The protocol supports byte, integer, single, * and double datatypes. Integers are two bytes, sent most significant first. * Singles are IEEE754 single precision floating point numbers (4 byte) sent * sign & exponent first. Doubles are IEEE754 double precision floating point * numbers (8 byte) sent sign & exponent first. * The receiver supports a large set of messages, only a small subset of * which are used here. From driver to receiver the following are used: * * ID Description * * 21 Request current time * 22 Mode Select * 2C Set/Request operating parameters * 2F Request UTC info * 35 Set/Request I/O options * From receiver to driver the following are recognised: * * ID Description * * 41 GPS Time * 44 Satellite selection, PDOP, mode * 46 Receiver health * 4B Machine code/status * 4C Report operating parameters (debug only) * 4F UTC correction data (used to get leap second warnings) * 55 I/O options (debug only) * * All others are accepted but ignored. * */ #define PI 3.1415926535898 /* lots of sig figs */ #define D2R PI/180.0 /*------------------------------------------------------------------- * sendcmd, sendbyte, sendetx, sendflt, sendint implement the command * interface to the receiver. * * CAVEAT: the sendflt, sendint routines are byte order dependend and * float implementation dependend - these must be converted to portable * versions ! * * CURRENT LIMITATION: float implementation. This runs only on systems * with IEEE754 floats as native floats */ typedef struct trimble { u_long last_msg; /* last message received */ u_long last_reset; /* last time a reset was issued */ u_char qtracking; /* query tracking status */ u_long ctrack; /* current tracking set */ u_long ltrack; /* last tracking set */ } trimble_t; union uval { u_char bd[8]; int iv; float fv; double dv; }; struct txbuf { short idx; /* index to first unused byte */ u_char *txt; /* pointer to actual data buffer */ }; void sendcmd (struct txbuf *buf, int c); void sendbyte (struct txbuf *buf, int b); void sendetx (struct txbuf *buf, struct parseunit *parse); void sendint (struct txbuf *buf, int a); void sendflt (struct txbuf *buf, double a); void sendcmd( struct txbuf *buf, int c ) { buf->txt[0] = DLE; buf->txt[1] = (u_char)c; buf->idx = 2; } void sendcmd (struct txbuf *buf, int c); void sendbyte (struct txbuf *buf, int b); void sendetx (struct txbuf *buf, struct parseunit *parse); void sendint (struct txbuf *buf, int a); void sendflt (struct txbuf *buf, double a); void sendbyte( struct txbuf *buf, int b ) { if (b == DLE) buf->txt[buf->idx++] = DLE; buf->txt[buf->idx++] = (u_char)b; } void sendetx( struct txbuf *buf, struct parseunit *parse ) { buf->txt[buf->idx++] = DLE; buf->txt[buf->idx++] = ETX; if (write(parse->generic->io.fd, buf->txt, (unsigned long)buf->idx) != buf->idx) { ERR(ERR_BADIO) msyslog(LOG_ERR, "PARSE receiver #%d: sendetx: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); } else { #ifdef DEBUG if (debug > 2) { char buffer[256]; mkreadable(buffer, sizeof(buffer), (char *)buf->txt, (unsigned)buf->idx, 1); printf("PARSE receiver #%d: transmitted message (%d bytes) >%s<\n", CLK_UNIT(parse->peer), buf->idx, buffer); } #endif clear_err(parse, ERR_BADIO); } } void sendint( struct txbuf *buf, int a ) { /* send 16bit int, msbyte first */ sendbyte(buf, (u_char)((a>>8) & 0xff)); sendbyte(buf, (u_char)(a & 0xff)); } void sendflt( struct txbuf *buf, double a ) { int i; union uval uval; uval.fv = (float) a; #ifdef WORDS_BIGENDIAN for (i=0; i<=3; i++) #else for (i=3; i>=0; i--) #endif sendbyte(buf, uval.bd[i]); } #define TRIM_POS_OPT 0x13 /* output position with high precision */ #define TRIM_TIME_OPT 0x03 /* use UTC time stamps, on second */ /*-------------------------------------------------- * trimble TSIP setup routine */ static int trimbletsip_setup( struct parseunit *parse, const char *reason ) { u_char buffer[256]; struct txbuf buf; trimble_t *t = parse->localdata; if (t && t->last_reset && ((t->last_reset + TRIMBLE_RESET_HOLDOFF) > current_time)) { return 1; /* not yet */ } if (t) t->last_reset = current_time; buf.txt = buffer; sendcmd(&buf, CMD_CVERSION); /* request software versions */ sendetx(&buf, parse); sendcmd(&buf, CMD_COPERPARAM); /* set operating parameters */ sendbyte(&buf, 4); /* static */ sendflt(&buf, 5.0*D2R); /* elevation angle mask = 10 deg XXX */ sendflt(&buf, 4.0); /* s/n ratio mask = 6 XXX */ sendflt(&buf, 12.0); /* PDOP mask = 12 */ sendflt(&buf, 8.0); /* PDOP switch level = 8 */ sendetx(&buf, parse); sendcmd(&buf, CMD_CMODESEL); /* fix mode select */ sendbyte(&buf, 1); /* time transfer mode */ sendetx(&buf, parse); sendcmd(&buf, CMD_CMESSAGE); /* request system message */ sendetx(&buf, parse); sendcmd(&buf, CMD_CSUPER); /* superpacket fix */ sendbyte(&buf, 0x2); /* binary mode */ sendetx(&buf, parse); sendcmd(&buf, CMD_CIOOPTIONS); /* set I/O options */ sendbyte(&buf, TRIM_POS_OPT); /* position output */ sendbyte(&buf, 0x00); /* no velocity output */ sendbyte(&buf, TRIM_TIME_OPT); /* UTC, compute on seconds */ sendbyte(&buf, 0x00); /* no raw measurements */ sendetx(&buf, parse); sendcmd(&buf, CMD_CUTCPARAM); /* request UTC correction data */ sendetx(&buf, parse); NLOG(NLOG_CLOCKINFO) ERR(ERR_BADIO) msyslog(LOG_ERR, "PARSE receiver #%d: trimbletsip_setup: RECEIVER RE-INITIALIZED (%s)", CLK_UNIT(parse->peer), reason); return 0; } /*-------------------------------------------------- * TRIMBLE TSIP check routine */ static void trimble_check( struct peer *peer ) { struct parseunit *parse = peer->procptr->unitptr; trimble_t *t = parse->localdata; u_char buffer[256]; struct txbuf buf; buf.txt = buffer; if (t) { if (current_time > t->last_msg + TRIMBLETSIP_IDLE_TIME) (void)trimbletsip_setup(parse, "message timeout"); } poll_poll(parse->peer); /* emit query string and re-arm timer */ if (t && t->qtracking) { u_long oldsats = t->ltrack & ~t->ctrack; t->qtracking = 0; t->ltrack = t->ctrack; if (oldsats) { int i; for (i = 0; oldsats; i++) { if (oldsats & (1 << i)) { sendcmd(&buf, CMD_CSTATTRACK); sendbyte(&buf, i+1); /* old sat */ sendetx(&buf, parse); } oldsats &= ~(1 << i); } } sendcmd(&buf, CMD_CSTATTRACK); sendbyte(&buf, 0x00); /* current tracking set */ sendetx(&buf, parse); } } /*-------------------------------------------------- * TRIMBLE TSIP end routine */ static void trimbletsip_end( struct parseunit *parse ) { trimble_t *t = parse->localdata; if (t) { free(t); parse->localdata = NULL; } parse->peer->procptr->nextaction = 0; parse->peer->procptr->action = NULL; } /*-------------------------------------------------- * TRIMBLE TSIP init routine */ static int trimbletsip_init( struct parseunit *parse ) { #if defined(VEOL) || defined(VEOL2) #ifdef HAVE_TERMIOS struct termios tio; /* NEEDED FOR A LONG TIME ! */ #endif #ifdef HAVE_SYSV_TTYS struct termio tio; /* NEEDED FOR A LONG TIME ! */ #endif /* * allocate local data area */ if (!parse->localdata) { trimble_t *t; t = (trimble_t *)(parse->localdata = emalloc(sizeof(trimble_t))); if (t) { memset((char *)t, 0, sizeof(trimble_t)); t->last_msg = current_time; } } parse->peer->procptr->action = trimble_check; parse->peer->procptr->nextaction = current_time; /* * configure terminal line for ICANON mode with VEOL characters */ if (TTY_GETATTR(parse->generic->io.fd, &tio) == -1) { msyslog(LOG_ERR, "PARSE receiver #%d: trimbletsip_init: tcgetattr(%d, &tio): %m", CLK_UNIT(parse->peer), parse->generic->io.fd); return 0; } else { if ((parse_clockinfo[CLK_TYPE(parse->peer)].cl_lflag & ICANON)) { #ifdef VEOL tio.c_cc[VEOL] = ETX; #endif #ifdef VEOL2 tio.c_cc[VEOL2] = DLE; #endif } if (TTY_SETATTR(parse->generic->io.fd, &tio) == -1) { msyslog(LOG_ERR, "PARSE receiver #%d: trimbletsip_init: tcsetattr(%d, &tio): %m", CLK_UNIT(parse->peer), parse->generic->io.fd); return 0; } } #endif return trimbletsip_setup(parse, "initial startup"); } /*------------------------------------------------------------ * trimbletsip_event - handle Trimble events * simple evente handler - attempt to re-initialize receiver */ static void trimbletsip_event( struct parseunit *parse, int event ) { switch (event) { case CEVNT_BADREPLY: /* reset on garbled input */ case CEVNT_TIMEOUT: /* reset on no input */ (void)trimbletsip_setup(parse, "event BAD_REPLY/TIMEOUT"); break; default: /* ignore */ break; } } /* * getflt, getint convert fields in the incoming data into the * appropriate type of item * * CAVEAT: these routines are currently definitely byte order dependent * and assume Representation(float) == IEEE754 * These functions MUST be converted to portable versions (especially * converting the float representation into ntp_fp formats in order * to avoid floating point operations at all! */ static float getflt( u_char *bp ) { union uval uval; #ifdef WORDS_BIGENDIAN uval.bd[0] = *bp++; uval.bd[1] = *bp++; uval.bd[2] = *bp++; uval.bd[3] = *bp; #else /* ! WORDS_BIGENDIAN */ uval.bd[3] = *bp++; uval.bd[2] = *bp++; uval.bd[1] = *bp++; uval.bd[0] = *bp; #endif /* ! WORDS_BIGENDIAN */ return uval.fv; } static double getdbl( u_char *bp ) { union uval uval; #ifdef WORDS_BIGENDIAN uval.bd[0] = *bp++; uval.bd[1] = *bp++; uval.bd[2] = *bp++; uval.bd[3] = *bp++; uval.bd[4] = *bp++; uval.bd[5] = *bp++; uval.bd[6] = *bp++; uval.bd[7] = *bp; #else /* ! WORDS_BIGENDIAN */ uval.bd[7] = *bp++; uval.bd[6] = *bp++; uval.bd[5] = *bp++; uval.bd[4] = *bp++; uval.bd[3] = *bp++; uval.bd[2] = *bp++; uval.bd[1] = *bp++; uval.bd[0] = *bp; #endif /* ! WORDS_BIGENDIAN */ return uval.dv; } static int getshort( unsigned char *p ) { return (int) get_msb_short(&p); } /*-------------------------------------------------- * trimbletsip_message - process trimble messages */ #define RTOD (180.0 / 3.1415926535898) #define mb(_X_) (buffer[2+(_X_)]) /* shortcut for buffer access */ static void trimbletsip_message( struct parseunit *parse, parsetime_t *parsetime ) { unsigned char *buffer = parsetime->parse_msg; unsigned int size = parsetime->parse_msglen; if ((size < 4) || (buffer[0] != DLE) || (buffer[size-1] != ETX) || (buffer[size-2] != DLE)) { #ifdef DEBUG if (debug > 2) { size_t i; printf("TRIMBLE BAD packet, size %d:\n ", size); for (i = 0; i < size; i++) { printf ("%2.2x, ", buffer[i]&0xff); if (i%16 == 15) printf("\n\t"); } printf("\n"); } #endif return; } else { u_short var_flag; trimble_t *tr = parse->localdata; unsigned int cmd = buffer[1]; char pbuffer[200]; char *t = pbuffer; cmd_info_t *s; #ifdef DEBUG if (debug > 3) { size_t i; printf("TRIMBLE packet 0x%02x, size %d:\n ", cmd, size); for (i = 0; i < size; i++) { printf ("%2.2x, ", buffer[i]&0xff); if (i%16 == 15) printf("\n\t"); } printf("\n"); } #endif if (tr) tr->last_msg = current_time; s = trimble_convert(cmd, trimble_rcmds); if (s) { t = ap(pbuffer, sizeof(pbuffer), t, "%s=\"", s->varname); } else { DPRINTF(1, ("TRIMBLE UNKNOWN COMMAND 0x%02x\n", cmd)); return; } var_flag = (u_short) s->varmode; switch(cmd) { case CMD_RCURTIME: t = ap(pbuffer, sizeof(pbuffer), t, "%f, %d, %f", getflt((unsigned char *)&mb(0)), getshort((unsigned char *)&mb(4)), getflt((unsigned char *)&mb(6))); break; case CMD_RBEST4: t = ap(pbuffer, sizeof(pbuffer), t, "mode: "); switch (mb(0) & 0xF) { default: t = ap(pbuffer, sizeof(pbuffer), t, "0x%x", mb(0) & 0x7); break; case 1: t = ap(pbuffer, sizeof(pbuffer), t, "0D"); break; case 3: t = ap(pbuffer, sizeof(pbuffer), t, "2D"); break; case 4: t = ap(pbuffer, sizeof(pbuffer), t, "3D"); break; } if (mb(0) & 0x10) t = ap(pbuffer, sizeof(pbuffer), t, "-MANUAL, "); else t = ap(pbuffer, sizeof(pbuffer), t, "-AUTO, "); t = ap(pbuffer, sizeof(pbuffer), t, "satellites %02d %02d %02d %02d, PDOP %.2f, HDOP %.2f, VDOP %.2f, TDOP %.2f", mb(1), mb(2), mb(3), mb(4), getflt((unsigned char *)&mb(5)), getflt((unsigned char *)&mb(9)), getflt((unsigned char *)&mb(13)), getflt((unsigned char *)&mb(17))); break; case CMD_RVERSION: t = ap(pbuffer, sizeof(pbuffer), t, "%d.%d (%d/%d/%d)", mb(0)&0xff, mb(1)&0xff, 1900+(mb(4)&0xff), mb(2)&0xff, mb(3)&0xff); break; case CMD_RRECVHEALTH: { static const char *msgs[] = { "Battery backup failed", "Signal processor error", "Alignment error, channel or chip 1", "Alignment error, channel or chip 2", "Antenna feed line fault", "Excessive ref freq. error", "", "" }; int i, bits; switch (mb(0) & 0xFF) { default: t = ap(pbuffer, sizeof(pbuffer), t, "illegal value 0x%02x", mb(0) & 0xFF); break; case 0x00: t = ap(pbuffer, sizeof(pbuffer), t, "doing position fixes"); break; case 0x01: t = ap(pbuffer, sizeof(pbuffer), t, "no GPS time yet"); break; case 0x03: t = ap(pbuffer, sizeof(pbuffer), t, "PDOP too high"); break; case 0x08: t = ap(pbuffer, sizeof(pbuffer), t, "no usable satellites"); break; case 0x09: t = ap(pbuffer, sizeof(pbuffer), t, "only ONE usable satellite"); break; case 0x0A: t = ap(pbuffer, sizeof(pbuffer), t, "only TWO usable satellites"); break; case 0x0B: t = ap(pbuffer, sizeof(pbuffer), t, "only THREE usable satellites"); break; case 0x0C: t = ap(pbuffer, sizeof(pbuffer), t, "the chosen satellite is unusable"); break; } bits = mb(1) & 0xFF; for (i = 0; i < 8; i++) if (bits & (0x1<", "", "" }; int i, bits; t = ap(pbuffer, sizeof(pbuffer), t, "machine id 0x%02x", mb(0) & 0xFF); bits = mb(1) & 0xFF; for (i = 0; i < 8; i++) if (bits & (0x1<"); } } break; case CMD_RSAT1BIAS: t = ap(pbuffer, sizeof(pbuffer), t, "%.1fm %.2fm/s at %.1fs", getflt(&mb(0)), getflt(&mb(4)), getflt(&mb(8))); break; case CMD_RIOOPTIONS: { t = ap(pbuffer, sizeof(pbuffer), t, "%02x %02x %02x %02x", mb(0), mb(1), mb(2), mb(3)); if (mb(0) != TRIM_POS_OPT || mb(2) != TRIM_TIME_OPT) { (void)trimbletsip_setup(parse, "bad io options"); } } break; case CMD_RSPOSXYZ: { double x = getflt((unsigned char *)&mb(0)); double y = getflt((unsigned char *)&mb(4)); double z = getflt((unsigned char *)&mb(8)); double f = getflt((unsigned char *)&mb(12)); if (f > 0.0) t = ap(pbuffer, sizeof(pbuffer), t, "x= %.1fm, y= %.1fm, z= %.1fm, time_of_fix= %f sec", x, y, z, f); else return; } break; case CMD_RSLLAPOS: { double lat = getflt((unsigned char *)&mb(0)); double lng = getflt((unsigned char *)&mb(4)); double f = getflt((unsigned char *)&mb(12)); if (f > 0.0) t = ap(pbuffer, sizeof(pbuffer), t, "lat %f %c, long %f %c, alt %.2fm", ((lat < 0.0) ? (-lat) : (lat))*RTOD, (lat < 0.0 ? 'S' : 'N'), ((lng < 0.0) ? (-lng) : (lng))*RTOD, (lng < 0.0 ? 'W' : 'E'), getflt((unsigned char *)&mb(8))); else return; } break; case CMD_RDOUBLEXYZ: { double x = getdbl((unsigned char *)&mb(0)); double y = getdbl((unsigned char *)&mb(8)); double z = getdbl((unsigned char *)&mb(16)); t = ap(pbuffer, sizeof(pbuffer), t, "x= %.1fm, y= %.1fm, z= %.1fm", x, y, z); } break; case CMD_RDOUBLELLA: { double lat = getdbl((unsigned char *)&mb(0)); double lng = getdbl((unsigned char *)&mb(8)); t = ap(pbuffer, sizeof(pbuffer), t, "lat %f %c, lon %f %c, alt %.2fm", ((lat < 0.0) ? (-lat) : (lat))*RTOD, (lat < 0.0 ? 'S' : 'N'), ((lng < 0.0) ? (-lng) : (lng))*RTOD, (lng < 0.0 ? 'W' : 'E'), getdbl((unsigned char *)&mb(16))); } break; case CMD_RALLINVIEW: { int i, sats; t = ap(pbuffer, sizeof(pbuffer), t, "mode: "); switch (mb(0) & 0x7) { default: t = ap(pbuffer, sizeof(pbuffer), t, "0x%x", mb(0) & 0x7); break; case 3: t = ap(pbuffer, sizeof(pbuffer), t, "2D"); break; case 4: t = ap(pbuffer, sizeof(pbuffer), t, "3D"); break; } if (mb(0) & 0x8) t = ap(pbuffer, sizeof(pbuffer), t, "-MANUAL, "); else t = ap(pbuffer, sizeof(pbuffer), t, "-AUTO, "); sats = (mb(0)>>4) & 0xF; t = ap(pbuffer, sizeof(pbuffer), t, "PDOP %.2f, HDOP %.2f, VDOP %.2f, TDOP %.2f, %d satellite%s in view: ", getflt((unsigned char *)&mb(1)), getflt((unsigned char *)&mb(5)), getflt((unsigned char *)&mb(9)), getflt((unsigned char *)&mb(13)), sats, (sats == 1) ? "" : "s"); for (i=0; i < sats; i++) { t = ap(pbuffer, sizeof(pbuffer), t, "%s%02d", i ? ", " : "", mb(17+i)); if (tr) tr->ctrack |= (1 << (mb(17+i)-1)); } if (tr) { /* mark for tracking status query */ tr->qtracking = 1; } } break; case CMD_RSTATTRACK: { t = ap(pbuffer, sizeof(pbuffer), t-2, "[%02d]=\"", mb(0)); /* add index to var name */ if (getflt((unsigned char *)&mb(4)) < 0.0) { t = ap(pbuffer, sizeof(pbuffer), t, ""); var_flag &= (u_short)(~DEF); } else { t = ap(pbuffer, sizeof(pbuffer), t, "ch=%d, acq=%s, eph=%d, signal_level= %5.2f, elevation= %5.2f, azimuth= %6.2f", (mb(1) & 0xFF)>>3, mb(2) ? ((mb(2) == 1) ? "ACQ" : "SRCH") : "NEVER", mb(3), getflt((unsigned char *)&mb(4)), getflt((unsigned char *)&mb(12)) * RTOD, getflt((unsigned char *)&mb(16)) * RTOD); if (mb(20)) { var_flag &= (u_short)(~DEF); t = ap(pbuffer, sizeof(pbuffer), t, ", OLD"); } if (mb(22)) { if (mb(22) == 1) t = ap(pbuffer, sizeof(pbuffer), t, ", BAD PARITY"); else if (mb(22) == 2) t = ap(pbuffer, sizeof(pbuffer), t, ", BAD EPH HEALTH"); } if (mb(23)) t = ap(pbuffer, sizeof(pbuffer), t, ", collecting data"); } } break; default: t = ap(pbuffer, sizeof(pbuffer), t, ""); break; } t = ap(pbuffer, sizeof(pbuffer), t, "\""); set_var(&parse->kv, pbuffer, sizeof(pbuffer), var_flag); } } /**============================================================ ** RAWDCF support **/ /*-------------------------------------------------- * rawdcf_init_1 - set up modem lines for RAWDCF receivers * SET DTR line */ #if defined(TIOCMSET) && (defined(TIOCM_DTR) || defined(CIOCM_DTR)) static int rawdcf_init_1( struct parseunit *parse ) { /* fixed 2000 for using with Linux by Wolfram Pienkoss */ /* * You can use the RS232 to supply the power for a DCF77 receiver. * Here a voltage between the DTR and the RTS line is used. Unfortunately * the name has changed from CIOCM_DTR to TIOCM_DTR recently. */ int sl232; if (ioctl(parse->generic->io.fd, TIOCMGET, (caddr_t)&sl232) == -1) { msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_1: WARNING: ioctl(fd, TIOCMGET, [C|T]IOCM_DTR): %m", CLK_UNIT(parse->peer)); return 0; } #ifdef TIOCM_DTR sl232 = (sl232 & ~TIOCM_RTS) | TIOCM_DTR; /* turn on DTR, clear RTS for power supply */ #else sl232 = (sl232 & ~CIOCM_RTS) | CIOCM_DTR; /* turn on DTR, clear RTS for power supply */ #endif if (ioctl(parse->generic->io.fd, TIOCMSET, (caddr_t)&sl232) == -1) { msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_1: WARNING: ioctl(fd, TIOCMSET, [C|T]IOCM_DTR): %m", CLK_UNIT(parse->peer)); } return 0; } #else static int rawdcfdtr_init_1( struct parseunit *parse ) { msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_1: WARNING: OS interface incapable of setting DTR to power DCF modules", CLK_UNIT(parse->peer)); return 0; } #endif /* DTR initialisation type */ /*-------------------------------------------------- * rawdcf_init_2 - set up modem lines for RAWDCF receivers * CLR DTR line, SET RTS line */ #if defined(TIOCMSET) && (defined(TIOCM_RTS) || defined(CIOCM_RTS)) static int rawdcf_init_2( struct parseunit *parse ) { /* fixed 2000 for using with Linux by Wolfram Pienkoss */ /* * You can use the RS232 to supply the power for a DCF77 receiver. * Here a voltage between the DTR and the RTS line is used. Unfortunately * the name has changed from CIOCM_DTR to TIOCM_DTR recently. */ int sl232; if (ioctl(parse->generic->io.fd, TIOCMGET, (caddr_t)&sl232) == -1) { msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_2: WARNING: ioctl(fd, TIOCMGET, [C|T]IOCM_RTS): %m", CLK_UNIT(parse->peer)); return 0; } #ifdef TIOCM_RTS sl232 = (sl232 & ~TIOCM_DTR) | TIOCM_RTS; /* turn on RTS, clear DTR for power supply */ #else sl232 = (sl232 & ~CIOCM_DTR) | CIOCM_RTS; /* turn on RTS, clear DTR for power supply */ #endif if (ioctl(parse->generic->io.fd, TIOCMSET, (caddr_t)&sl232) == -1) { msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_2: WARNING: ioctl(fd, TIOCMSET, [C|T]IOCM_RTS): %m", CLK_UNIT(parse->peer)); } return 0; } #else static int rawdcf_init_2( struct parseunit *parse ) { msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_2: WARNING: OS interface incapable of setting RTS to power DCF modules", CLK_UNIT(parse->peer)); return 0; } #endif /* DTR initialisation type */ #else /* defined(REFCLOCK) && defined(PARSE) */ NONEMPTY_TRANSLATION_UNIT #endif /* defined(REFCLOCK) && defined(PARSE) */ /* * History: * * refclock_parse.c,v * Revision 4.81 2009/05/01 10:15:29 kardel * use new refclock_ppsapi interface * * Revision 4.80 2007/08/11 12:06:29 kardel * update comments wrt/ to PPS * * Revision 4.79 2007/08/11 11:52:23 kardel * - terminate io bindings before io_closeclock() will close our file descriptor * * Revision 4.78 2006/12/22 20:08:27 kardel * Bug 746 (RFE): add configuration for Expert mouseCLOCK USB v2.0 as mode 19 * * Revision 4.77 2006/08/05 07:44:49 kardel * support optionally separate PPS devices via /dev/refclockpps-{0..3} * * Revision 4.76 2006/06/22 18:40:47 kardel * clean up signedness (gcc 4) * * Revision 4.75 2006/06/22 16:58:10 kardel * Bug #632: call parse_ppsapi() in parse_ctl() when updating * the PPS offset. Fix sign of offset passed to kernel. * * Revision 4.74 2006/06/18 21:18:37 kardel * NetBSD Coverity CID 3796: possible NULL deref * * Revision 4.73 2006/05/26 14:23:46 kardel * cleanup of copyright info * * Revision 4.72 2006/05/26 14:19:43 kardel * cleanup of ioctl cruft * * Revision 4.71 2006/05/26 14:15:57 kardel * delay adding refclock to async refclock io after all initializations * * Revision 4.70 2006/05/25 18:20:50 kardel * bug #619 * terminate parse io engine after de-registering * from refclock io engine * * Revision 4.69 2006/05/25 17:28:02 kardel * complete refclock io structure initialization *before* inserting it into the * refclock input machine (avoids null pointer deref) (bug #619) * * Revision 4.68 2006/05/01 17:02:51 kardel * copy receiver method also for newlwy created receive buffers * * Revision 4.67 2006/05/01 14:37:29 kardel * If an input buffer parses into more than one message do insert the * parsed message in a new input buffer instead of processing it * directly. This avoids deed complicated processing in signal * handling. * * Revision 4.66 2006/03/18 00:45:30 kardel * coverity fixes found in NetBSD coverity scan * * Revision 4.65 2006/01/26 06:08:33 kardel * output errno on PPS setup failure * * Revision 4.64 2005/11/09 20:44:47 kardel * utilize full PPS timestamp resolution from PPS API * * Revision 4.63 2005/10/07 22:10:25 kardel * bounded buffer implementation * * Revision 4.62.2.2 2005/09/25 10:20:16 kardel * avoid unexpected buffer overflows due to sprintf("%f") on strange floats: * replace almost all str* and *printf functions be their buffer bounded * counterparts * * Revision 4.62.2.1 2005/08/27 16:19:27 kardel * limit re-set rate of trimble clocks * * Revision 4.62 2005/08/06 17:40:00 kardel * cleanup size handling wrt/ to buffer boundaries * * Revision 4.61 2005/07/27 21:16:19 kardel * fix a long (> 11 years) misconfiguration wrt/ Meinberg cflag factory * default setup. CSTOPB was missing for the 7E2 default data format of * the DCF77 clocks. * * Revision 4.60 2005/07/17 21:14:44 kardel * change contents of version string to include the RCS/CVS Id * * Revision 4.59 2005/07/06 06:56:38 kardel * syntax error * * Revision 4.58 2005/07/04 13:10:40 kardel * fix bug 455: tripping over NULL pointer on cleanup * fix shadow storage logic for ppsphaseadjust and trustime wrt/ time2 * fix compiler warnings for some platforms wrt/ printf formatstrings and * varying structure element sizes * reorder assignment in binding to avoid tripping over NULL pointers * * Revision 4.57 2005/06/25 09:25:19 kardel * sort out log output sequence * * Revision 4.56 2005/06/14 21:47:27 kardel * collect samples only if samples are ok (sync or trusted flywheel) * propagate pps phase adjustment value to kernel via PPSAPI to help HARDPPS * en- and dis-able HARDPPS in correlation to receiver sync state * * Revision 4.55 2005/06/02 21:28:31 kardel * clarify trust logic * * Revision 4.54 2005/06/02 17:06:49 kardel * change status reporting to use fixed refclock_report() * * Revision 4.53 2005/06/02 16:33:31 kardel * fix acceptance of clocks unsync clocks right at start * * Revision 4.52 2005/05/26 21:55:06 kardel * cleanup status reporting * * Revision 4.51 2005/05/26 19:19:14 kardel * implement fast refclock startup * * Revision 4.50 2005/04/16 20:51:35 kardel * set hardpps_enable = 1 when binding a kernel PPS source * * Revision 4.49 2005/04/16 17:29:26 kardel * add non polling clock type 18 for just listenning to Meinberg clocks * * Revision 4.48 2005/04/16 16:22:27 kardel * bk sync 20050415 ntp-dev * * Revision 4.47 2004/11/29 10:42:48 kardel * bk sync ntp-dev 20041129 * * Revision 4.46 2004/11/29 10:26:29 kardel * keep fudgetime2 in sync with trusttime/ppsphaseadjust depending in flag1 * * Revision 4.45 2004/11/14 20:53:20 kardel * clear PPS flags after using them * * Revision 4.44 2004/11/14 15:29:41 kardel * support PPSAPI, upgrade Copyright to Berkeley style * * Revision 4.43 2001/05/26 22:53:16 kardel * 20010526 reconcilation * * Revision 4.42 2000/05/14 15:31:51 kardel * PPSAPI && RAWDCF modemline support * * Revision 4.41 2000/04/09 19:50:45 kardel * fixed rawdcfdtr_init() -> rawdcf_init_1 * * Revision 4.40 2000/04/09 15:27:55 kardel * modem line fiddle in rawdcf_init_2 * * Revision 4.39 2000/03/18 09:16:55 kardel * PPSAPI integration * * Revision 4.38 2000/03/05 20:25:06 kardel * support PPSAPI * * Revision 4.37 2000/03/05 20:11:14 kardel * 4.0.99g reconcilation * * Revision 4.36 1999/11/28 17:18:20 kardel * disabled burst mode * * Revision 4.35 1999/11/28 09:14:14 kardel * RECON_4_0_98F * * Revision 4.34 1999/05/14 06:08:05 kardel * store current_time in a suitable container (u_long) * * Revision 4.33 1999/05/13 21:48:38 kardel * double the no response timeout interval * * Revision 4.32 1999/05/13 20:09:13 kardel * complain only about missing polls after a full poll interval * * Revision 4.31 1999/05/13 19:59:32 kardel * add clock type 16 for RTS set DTR clr in RAWDCF * * Revision 4.30 1999/02/28 20:36:43 kardel * fixed printf fmt * * Revision 4.29 1999/02/28 19:58:23 kardel * updated copyright information * * Revision 4.28 1999/02/28 19:01:50 kardel * improved debug out on sent Meinberg messages * * Revision 4.27 1999/02/28 18:05:55 kardel * no linux/ppsclock.h stuff * * Revision 4.26 1999/02/28 15:27:27 kardel * wharton clock integration * * Revision 4.25 1999/02/28 14:04:46 kardel * added missing double quotes to UTC information string * * Revision 4.24 1999/02/28 12:06:50 kardel * (parse_control): using gmprettydate instead of prettydate() * (mk_utcinfo): new function for formatting GPS derived UTC information * (gps16x_message): changed to use mk_utcinfo() * (trimbletsip_message): changed to use mk_utcinfo() * ignoring position information in unsynchronized mode * (parse_start): augument linux support for optional ASYNC_LOW_LATENCY * * Revision 4.23 1999/02/23 19:47:53 kardel * fixed #endifs * (stream_receive): fixed formats * * Revision 4.22 1999/02/22 06:21:02 kardel * use new autoconfig symbols * * Revision 4.21 1999/02/21 12:18:13 kardel * 4.91f reconcilation * * Revision 4.20 1999/02/21 10:53:36 kardel * initial Linux PPSkit version * * Revision 4.19 1999/02/07 09:10:45 kardel * clarify STREAMS mitigation rules in comment * * Revision 4.18 1998/12/20 23:45:34 kardel * fix types and warnings * * Revision 4.17 1998/11/15 21:24:51 kardel * cannot access mbg_ routines when CLOCK_MEINBERG * is not defined * * Revision 4.16 1998/11/15 20:28:17 kardel * Release 4.0.73e13 reconcilation * * Revision 4.15 1998/08/22 21:56:08 kardel * fixed IO handling for non-STREAM IO * * Revision 4.14 1998/08/16 19:00:48 kardel * (gps16x_message): reduced UTC parameter information (dropped A0,A1) * made uval a local variable (killed one of the last globals) * (sendetx): added logging of messages when in debug mode * (trimble_check): added periodic checks to facilitate re-initialization * (trimbletsip_init): made use of EOL character if in non-kernel operation * (trimbletsip_message): extended message interpretation * (getdbl): fixed data conversion * * Revision 4.13 1998/08/09 22:29:13 kardel * Trimble TSIP support * * Revision 4.12 1998/07/11 10:05:34 kardel * Release 4.0.73d reconcilation * * Revision 4.11 1998/06/14 21:09:42 kardel * Sun acc cleanup * * Revision 4.10 1998/06/13 12:36:45 kardel * signed/unsigned, name clashes * * Revision 4.9 1998/06/12 15:30:00 kardel * prototype fixes * * Revision 4.8 1998/06/12 11:19:42 kardel * added direct input processing routine for refclocks in * order to avaiod that single character io gobbles up all * receive buffers and drops input data. (Problem started * with fast machines so a character a buffer was possible * one of the few cases where faster machines break existing * allocation algorithms) * * Revision 4.7 1998/06/06 18:35:20 kardel * (parse_start): added BURST mode initialisation * * Revision 4.6 1998/05/27 06:12:46 kardel * RAWDCF_BASEDELAY default added * old comment removed * casts for ioctl() * * Revision 4.5 1998/05/25 22:05:09 kardel * RAWDCF_SETDTR option removed * clock type 14 attempts to set DTR for * power supply of RAWDCF receivers * * Revision 4.4 1998/05/24 16:20:47 kardel * updated comments referencing Meinberg clocks * added RAWDCF clock with DTR set option as type 14 * * Revision 4.3 1998/05/24 10:48:33 kardel * calibrated CONRAD RAWDCF default fudge factor * * Revision 4.2 1998/05/24 09:59:35 kardel * corrected version information (ntpq support) * * Revision 4.1 1998/05/24 09:52:31 kardel * use fixed format only (new IO model) * output debug to stdout instead of msyslog() * don't include >"< in ASCII output in order not to confuse * ntpq parsing * * Revision 4.0 1998/04/10 19:52:11 kardel * Start 4.0 release version numbering * * Revision 1.2 1998/04/10 19:28:04 kardel * initial NTP VERSION 4 integration of PARSE with GPS166 binary support * derived from 3.105.1.2 from V3 tree * * Revision information 3.1 - 3.105 from log deleted 1998/04/10 kardel * */