From 1da58e06af09dd2e232cca9f3d369bfe946358e4 Mon Sep 17 00:00:00 2001 From: marius Date: Fri, 17 Apr 2009 23:11:18 +0000 Subject: [PATCH] MFC: r191072 Fix whitespace. Approved by: re (kib) git-svn-id: svn://svn.freebsd.org/base/releng/7.2@191229 ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f --- sys/dev/fb/machfb.c | 62 ++++++++++++++++++++++----------------------- 1 file changed, 31 insertions(+), 31 deletions(-) diff --git a/sys/dev/fb/machfb.c b/sys/dev/fb/machfb.c index eb128eb6..714aba40 100644 --- a/sys/dev/fb/machfb.c +++ b/sys/dev/fb/machfb.c @@ -53,12 +53,12 @@ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ - + #include __FBSDID("$FreeBSD$"); /* - * Driver for ATI Mach64 graphics chips. Some code is derived from the + * Driver for ATI Mach64 graphics chips. Some code is derived from the * ATI Rage Pro and Derivatives Programmer's Guide. */ @@ -100,7 +100,7 @@ __FBSDID("$FreeBSD$"); struct machfb_softc { video_adapter_t sc_va; /* must be first */ - phandle_t sc_node; + phandle_t sc_node; uint16_t sc_chip_id; uint8_t sc_chip_rev; @@ -572,7 +572,7 @@ machfb_init(int unit, video_adapter_t *adp, int flags) vid_init_struct(adp, MACHFB_DRIVER_NAME, -1, unit); - if (OF_getprop(sc->sc_node, "height", &sc->sc_height, + if (OF_getprop(sc->sc_node, "height", &sc->sc_height, sizeof(sc->sc_height)) == -1) return (ENXIO); if (OF_getprop(sc->sc_node, "width", &sc->sc_width, @@ -630,12 +630,12 @@ machfb_init(int unit, video_adapter_t *adp, int flags) machfb_init_engine(sc); #if 0 - mach64_adjust_frame(0, 0); + machfb_adjust_frame(0, 0); #endif machfb_set_mode(adp, 0); /* - * Install our 16-color color map. This is done only once and with + * Install our 16-color color map. This is done only once and with * an offset of 16 on sparc64 as there the OBP driver expects white * to be at index 0 and black at 255 (some versions also use 1 - 8 * for color text support or the full palette for the boot banner @@ -880,13 +880,13 @@ machfb_mmap(video_adapter_t *adp, vm_offset_t offset, vm_paddr_t *paddr, if (adp->va_mem_base != 0 && offset >= adp->va_mem_base && offset < adp->va_mem_base + adp->va_mem_size) { - *paddr = sc->sc_vmemh + offset - adp->va_mem_base; + *paddr = sc->sc_vmemh + offset - adp->va_mem_base; return (0); } if (offset >= adp->va_registers && offset < adp->va_registers + adp->va_registers_size) { - *paddr = sc->sc_memh + offset - adp->va_registers; + *paddr = sc->sc_memh + offset - adp->va_registers; return (0); } @@ -1083,7 +1083,7 @@ machfb_puts(video_adapter_t *adp, vm_offset_t off, uint16_t *s, int len) for (i = 0; i < len; i++) { /* * Accelerate continuous blanks by drawing a respective - * rectangle instead. Drawing a rectangle of any size + * rectangle instead. Drawing a rectangle of any size * takes about the same number of operations as drawing * a single character. */ @@ -1091,7 +1091,7 @@ machfb_puts(video_adapter_t *adp, vm_offset_t off, uint16_t *s, int len) a = (s[i] & 0xff00) >> 8; if (c == 0x00 || c == 0x20 || c == 0xdb || c == 0xff) { color2 = (a >> (c == 0xdb ? 0 : 4) & 0xf); - x2 = (((off + i) % adp->va_info.vi_width) * + x2 = (((off + i) % adp->va_info.vi_width) * adp->va_info.vi_cwidth) + sc->sc_xmargin; y2 = (((off + i) / adp->va_info.vi_width) * adp->va_info.vi_cheight) + sc->sc_ymargin; @@ -1135,7 +1135,7 @@ machfb_putm(video_adapter_t *adp, int x, int y, uint8_t *pixel_image, if ((!(sc->sc_flags & MACHFB_CUREN)) && (error = machfb_cursor_install(sc)) < 0) - return (error); + return (error); else { /* * The hardware cursor always must be disabled when @@ -1174,7 +1174,7 @@ machfb_pci_probe(device_t dev) return (BUS_PROBE_DEFAULT); } } - + return (ENXIO); } @@ -1192,8 +1192,8 @@ machfb_pci_attach(device_t dev) node = ofw_bus_get_node(dev); if ((sc = (struct machfb_softc *)vid_get_adapter(vid_find_adapter( MACHFB_DRIVER_NAME, 0))) != NULL && sc->sc_node == node) { - device_printf(dev, "console\n"); - device_set_softc(dev, sc); + device_printf(dev, "console\n"); + device_set_softc(dev, sc); } else { sc = device_get_softc(dev); bzero(sc, sizeof(struct machfb_softc)); @@ -1203,7 +1203,7 @@ machfb_pci_attach(device_t dev) sc->sc_chip_rev = pci_get_revid(dev); } adp = &sc->sc_va; - + /* * Regardless whether we are the console and already allocated * resources in machfb_configure() or not we have to allocate @@ -1214,7 +1214,7 @@ machfb_pci_attach(device_t dev) pci_write_config(dev, PCIR_COMMAND, pci_read_config(dev, PCIR_COMMAND, 2) | PCIM_CMD_PORTEN | PCIM_CMD_MEMEN, 2); - + sc->sc_memrid = PCIR_BAR(0); if ((sc->sc_memres = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->sc_memrid, RF_ACTIVE)) == NULL) { @@ -1228,18 +1228,18 @@ machfb_pci_attach(device_t dev) sc->sc_regt = sc->sc_memt; bus_space_subregion(sc->sc_regt, sc->sc_memh, MACH64_REG_OFF, MACH64_REG_SIZE, &sc->sc_regh); - adp->va_buffer = (vm_offset_t)rman_get_virtual(sc->sc_memres); + adp->va_buffer = (vm_offset_t)rman_get_virtual(sc->sc_memres); adp->va_buffer_size = rman_get_size(sc->sc_memres); /* * Depending on the firmware version the VGA I/O and/or memory - * resources of the Mach64 chips come up disabled. We generally + * resources of the Mach64 chips come up disabled. We generally * enable them above (pci(4) actually already did this unless * pci_enable_io_modes is not set) but this doesn't necessarily - * mean that we get valid ones. Invalid resources seem to have - * in common that they start at address 0. We don't allocate + * mean that we get valid ones. Invalid resources seem to have + * in common that they start at address 0. We don't allocate * them in this case in order to avoid warnings in apb(4) and - * crashes when using these invalid resources. Xorg is aware + * crashes when using these invalid resources. Xorg is aware * of this and doesn't use the VGA resources in this case (but * demands them if they are valid). */ @@ -1288,9 +1288,9 @@ machfb_pci_attach(device_t dev) /* * During device configuration we don't necessarily probe * the adapter which is the console first so we can't use - * the device unit number for the video adapter unit. The + * the device unit number for the video adapter unit. The * worst case would be that we use the video adapter unit - * 0 twice. As it doesn't really matter which unit number + * 0 twice. As it doesn't really matter which unit number * the corresponding video adapter has just use the next * unused one. */ @@ -1299,7 +1299,7 @@ machfb_pci_attach(device_t dev) break; if ((error = sw->init(i, adp, 0)) != 0) { device_printf(dev, "cannot initialize adapter\n"); - goto fail_vmemres; + goto fail_vmemres; } } @@ -1333,7 +1333,7 @@ machfb_pci_attach(device_t dev) /* * Allocate one page for the mouse pointer image at the end of * the little endian aperture, right before the memory mapped - * registers that might also reside there. Must be done after + * registers that might also reside there. Must be done after * sc_memsize was set and possibly adjusted to account for the * memory mapped registers. */ @@ -1346,7 +1346,7 @@ machfb_pci_attach(device_t dev) /* * Register a handler that performs some cosmetic surgery like * turning off the mouse pointer on halt in preparation for - * handing the screen over to the OFW. Register another handler + * handing the screen over to the OFW. Register another handler * that turns off the CRTC when resetting, otherwise the OFW * boot command issued by cpu_reset() just doesn't work. */ @@ -1358,12 +1358,12 @@ machfb_pci_attach(device_t dev) return (0); fail_vmemres: - if (sc->sc_vmemres != NULL) - bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_vmemrid, + if (sc->sc_vmemres != NULL) + bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_vmemrid, sc->sc_vmemres); fail_viores: - if (sc->sc_viores != NULL) - bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_viorid, + if (sc->sc_viores != NULL) + bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_viorid, sc->sc_viores); fail_memres: bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_memrid, sc->sc_memres); @@ -1556,7 +1556,7 @@ machfb_adjust_frame(struct machfb_softc *sc, int x, int y) offset = ((x + y * sc->sc_width) * (sc->sc_depth >> 3)) >> 3; regw(sc, CRTC_OFF_PITCH, (regr(sc, CRTC_OFF_PITCH) & 0xfff00000) | - offset); + offset); } #endif -- 2.42.0