From 4fb79b4c977416ed977773b249576e62047b0071 Mon Sep 17 00:00:00 2001 From: marius Date: Sat, 25 Apr 2009 23:08:59 +0000 Subject: [PATCH] MFC: r191491, r191492 Sync the sparc64 hardware notes with reality, mainly regarding support of sun4u-machines based on USIII and beyond in 7.2-RELEASE. Approved by: re (blackend) git-svn-id: svn://svn.freebsd.org/base/releng/7.2@191502 ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f --- .../doc/en_US.ISO8859-1/hardware/article.sgml | 77 +++++++++++++++---- 1 file changed, 63 insertions(+), 14 deletions(-) diff --git a/release/doc/en_US.ISO8859-1/hardware/article.sgml b/release/doc/en_US.ISO8859-1/hardware/article.sgml index 8d1286db..431bd1fd 100644 --- a/release/doc/en_US.ISO8859-1/hardware/article.sgml +++ b/release/doc/en_US.ISO8859-1/hardware/article.sgml @@ -326,9 +326,13 @@ SMP is supported on all systems with more than 1 processor. - In general, &os;/&arch.sparc64; systems must use serial consoles. - While it is possible to boot or install a system using the - OpenFirmware console, the console device is not usable. + When using the GENERIC kernel, + &os;/&arch.sparc64; systems not equipped with a framebuffer + supported by the &man.creator.4; (&sun; Creator, &sun; Creator3D + and &sun; Elite3D) or &man.machfb.4; (&sun; PGX and &sun; PGX64 + as well as the ATI Mach64 chips found onboard in for example + &sun.blade; 100, &sun.blade; 150, &sun.ultra; 5 and &sun.ultra; 10) + driver must use the serial console. If you have a system that is not listed here, it may not have been tested with &os; &release.current;. We encourage you to @@ -344,6 +348,9 @@ &sun.blade; 150 + + &sun.enterprise; 100 + &sun.enterprise; 220R @@ -386,6 +393,12 @@ &netra; X1 + + &sparcengine; Ultra AX1105 + + + &sparcengine; Ultra AXe + &sparcengine; Ultra AXi @@ -416,10 +429,16 @@ &sun.ultra; 80 + + &sun.ultra; 450 + - The following systems are partially supported by &os;. In particular - the onboard SCSI controller in sbus systems is not supported. + The following systems are partially supported by &os;. In + particular the fibre channel controllers in SBus-based systems are not + supported. However, it is possible to use these with a SCSI controller + supported by the &man.esp.4 driver (&sun; ESP SCSI, &sun; FAS Fast-SCSI + and &sun; FAS366 Fast-Wide SCSI controllers). @@ -430,16 +449,48 @@ - The following systems are not supported by &os;. This may be due - to lack of processor support (&ultrasparc; III), due to a quirk in the - system design that makes &os; unstable, or due to lack of support for - sufficient onboard devices to make &os; generally useful. + Starting with 7.2-RELEASE, &arch.sparc64; systems based on + &ultrasparc; III and beyond are also supported by &os, which includes + the following known working systems: - - All systems containing &ultrasparc; III processor(s). - + + &sun.blade; 1000 + + + &sun.blade; 1500 + + + &sun.blade; 2000 + + + &sun.fire; 280R + + + &sun.fire; V210 + + + &sun.fire; V440 (except for the on-board NICs) + + + &sun.fire; V880 + + + &netra; 20/&netra; T4 + + + The following &ultrasparc; IIIi systems are not tested but + believed to be also supported by &os: + + + + &sun.fire; V125 + + + &sun.fire; V240 + + @@ -1434,8 +1485,6 @@ Power Management Controller of NEC PC-98 Note (pmc driver) - OpenFirmware console (ofwcons driver) - -- 2.45.0