/*- * Copyright (c) 2004 The FreeBSD Project * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_kdb.h" #include #include #include #include #include #include #include #include #include #include #include #ifdef SMP #include #endif int kdb_active = 0; static void *kdb_jmpbufp = NULL; struct kdb_dbbe *kdb_dbbe = NULL; static struct pcb kdb_pcb; struct pcb *kdb_thrctx = NULL; struct thread *kdb_thread = NULL; struct trapframe *kdb_frame = NULL; KDB_BACKEND(null, NULL, NULL, NULL); SET_DECLARE(kdb_dbbe_set, struct kdb_dbbe); static int kdb_sysctl_available(SYSCTL_HANDLER_ARGS); static int kdb_sysctl_current(SYSCTL_HANDLER_ARGS); static int kdb_sysctl_enter(SYSCTL_HANDLER_ARGS); static int kdb_sysctl_panic(SYSCTL_HANDLER_ARGS); static int kdb_sysctl_trap(SYSCTL_HANDLER_ARGS); static int kdb_sysctl_trap_code(SYSCTL_HANDLER_ARGS); SYSCTL_NODE(_debug, OID_AUTO, kdb, CTLFLAG_RW, NULL, "KDB nodes"); SYSCTL_PROC(_debug_kdb, OID_AUTO, available, CTLTYPE_STRING | CTLFLAG_RD, NULL, 0, kdb_sysctl_available, "A", "list of available KDB backends"); SYSCTL_PROC(_debug_kdb, OID_AUTO, current, CTLTYPE_STRING | CTLFLAG_RW, NULL, 0, kdb_sysctl_current, "A", "currently selected KDB backend"); SYSCTL_PROC(_debug_kdb, OID_AUTO, enter, CTLTYPE_INT | CTLFLAG_RW, NULL, 0, kdb_sysctl_enter, "I", "set to enter the debugger"); SYSCTL_PROC(_debug_kdb, OID_AUTO, panic, CTLTYPE_INT | CTLFLAG_RW, NULL, 0, kdb_sysctl_panic, "I", "set to panic the kernel"); SYSCTL_PROC(_debug_kdb, OID_AUTO, trap, CTLTYPE_INT | CTLFLAG_RW, NULL, 0, kdb_sysctl_trap, "I", "set to cause a page fault via data access"); SYSCTL_PROC(_debug_kdb, OID_AUTO, trap_code, CTLTYPE_INT | CTLFLAG_RW, NULL, 0, kdb_sysctl_trap_code, "I", "set to cause a page fault via code access"); /* * Flag indicating whether or not to IPI the other CPUs to stop them on * entering the debugger. Sometimes, this will result in a deadlock as * stop_cpus() waits for the other cpus to stop, so we allow it to be * disabled. In order to maximize the chances of success, use a hard * stop for that. */ #ifdef SMP static int kdb_stop_cpus = 1; SYSCTL_INT(_debug_kdb, OID_AUTO, stop_cpus, CTLTYPE_INT | CTLFLAG_RW, &kdb_stop_cpus, 0, "stop other CPUs when entering the debugger"); TUNABLE_INT("debug.kdb.stop_cpus", &kdb_stop_cpus); #endif /* * Flag to indicate to debuggers why the debugger was entered. */ const char * volatile kdb_why = KDB_WHY_UNSET; static int kdb_sysctl_available(SYSCTL_HANDLER_ARGS) { struct kdb_dbbe *be, **iter; char *avail, *p; ssize_t len, sz; int error; sz = 0; SET_FOREACH(iter, kdb_dbbe_set) { be = *iter; if (be->dbbe_active == 0) sz += strlen(be->dbbe_name) + 1; } sz++; avail = malloc(sz, M_TEMP, M_WAITOK); p = avail; *p = '\0'; SET_FOREACH(iter, kdb_dbbe_set) { be = *iter; if (be->dbbe_active == 0) { len = snprintf(p, sz, "%s ", be->dbbe_name); p += len; sz -= len; } } KASSERT(sz >= 0, ("%s", __func__)); error = sysctl_handle_string(oidp, avail, 0, req); free(avail, M_TEMP); return (error); } static int kdb_sysctl_current(SYSCTL_HANDLER_ARGS) { char buf[16]; int error; if (kdb_dbbe != NULL) { strncpy(buf, kdb_dbbe->dbbe_name, sizeof(buf)); buf[sizeof(buf) - 1] = '\0'; } else *buf = '\0'; error = sysctl_handle_string(oidp, buf, sizeof(buf), req); if (error != 0 || req->newptr == NULL) return (error); if (kdb_active) return (EBUSY); return (kdb_dbbe_select(buf)); } static int kdb_sysctl_enter(SYSCTL_HANDLER_ARGS) { int error, i; error = sysctl_wire_old_buffer(req, sizeof(int)); if (error == 0) { i = 0; error = sysctl_handle_int(oidp, &i, 0, req); } if (error != 0 || req->newptr == NULL) return (error); if (kdb_active) return (EBUSY); kdb_enter(KDB_WHY_SYSCTL, "sysctl debug.kdb.enter"); return (0); } static int kdb_sysctl_panic(SYSCTL_HANDLER_ARGS) { int error, i; error = sysctl_wire_old_buffer(req, sizeof(int)); if (error == 0) { i = 0; error = sysctl_handle_int(oidp, &i, 0, req); } if (error != 0 || req->newptr == NULL) return (error); panic("kdb_sysctl_panic"); return (0); } static int kdb_sysctl_trap(SYSCTL_HANDLER_ARGS) { int error, i; int *addr = (int *)0x10; error = sysctl_wire_old_buffer(req, sizeof(int)); if (error == 0) { i = 0; error = sysctl_handle_int(oidp, &i, 0, req); } if (error != 0 || req->newptr == NULL) return (error); return (*addr); } static int kdb_sysctl_trap_code(SYSCTL_HANDLER_ARGS) { int error, i; void (*fp)(u_int, u_int, u_int) = (void *)0xdeadc0de; error = sysctl_wire_old_buffer(req, sizeof(int)); if (error == 0) { i = 0; error = sysctl_handle_int(oidp, &i, 0, req); } if (error != 0 || req->newptr == NULL) return (error); (*fp)(0x11111111, 0x22222222, 0x33333333); return (0); } void kdb_panic(const char *msg) { #ifdef SMP stop_cpus_hard(PCPU_GET(other_cpus)); #endif printf("KDB: panic\n"); panic(msg); } void kdb_reboot(void) { printf("KDB: reboot requested\n"); shutdown_nice(0); } /* * Solaris implements a new BREAK which is initiated by a character sequence * CR ~ ^b which is similar to a familiar pattern used on Sun servers by the * Remote Console. * * Note that this function may be called from almost anywhere, with interrupts * disabled and with unknown locks held, so it must not access data other than * its arguments. Its up to the caller to ensure that the state variable is * consistent. */ #define KEY_CR 13 /* CR '\r' */ #define KEY_TILDE 126 /* ~ */ #define KEY_CRTLB 2 /* ^B */ #define KEY_CRTLP 16 /* ^P */ #define KEY_CRTLR 18 /* ^R */ int kdb_alt_break(int key, int *state) { int brk; brk = 0; switch (*state) { case 0: if (key == KEY_CR) *state = 1; break; case 1: if (key == KEY_TILDE) *state = 2; break; case 2: if (key == KEY_CRTLB) brk = KDB_REQ_DEBUGGER; else if (key == KEY_CRTLP) brk = KDB_REQ_PANIC; else if (key == KEY_CRTLR) brk = KDB_REQ_REBOOT; *state = 0; } return (brk); } /* * Print a backtrace of the calling thread. The backtrace is generated by * the selected debugger, provided it supports backtraces. If no debugger * is selected or the current debugger does not support backtraces, this * function silently returns. */ void kdb_backtrace(void) { if (kdb_dbbe != NULL && kdb_dbbe->dbbe_trace != NULL) { printf("KDB: stack backtrace:\n"); kdb_dbbe->dbbe_trace(); } } /* * Set/change the current backend. */ int kdb_dbbe_select(const char *name) { struct kdb_dbbe *be, **iter; SET_FOREACH(iter, kdb_dbbe_set) { be = *iter; if (be->dbbe_active == 0 && strcmp(be->dbbe_name, name) == 0) { kdb_dbbe = be; return (0); } } return (EINVAL); } /* * Enter the currently selected debugger. If a message has been provided, * it is printed first. If the debugger does not support the enter method, * it is entered by using breakpoint(), which enters the debugger through * kdb_trap(). The 'why' argument will contain a more mechanically usable * string than 'msg', and is relied upon by DDB scripting to identify the * reason for entering the debugger so that the right script can be run. */ void kdb_enter(const char *why, const char *msg) { if (kdb_dbbe != NULL && kdb_active == 0) { if (msg != NULL) printf("KDB: enter: %s\n", msg); kdb_why = why; breakpoint(); kdb_why = KDB_WHY_UNSET; } } /* * Initialize the kernel debugger interface. */ void kdb_init(void) { struct kdb_dbbe *be, **iter; int cur_pri, pri; kdb_active = 0; kdb_dbbe = NULL; cur_pri = -1; SET_FOREACH(iter, kdb_dbbe_set) { be = *iter; pri = (be->dbbe_init != NULL) ? be->dbbe_init() : -1; be->dbbe_active = (pri >= 0) ? 0 : -1; if (pri > cur_pri) { cur_pri = pri; kdb_dbbe = be; } } if (kdb_dbbe != NULL) { printf("KDB: debugger backends:"); SET_FOREACH(iter, kdb_dbbe_set) { be = *iter; if (be->dbbe_active == 0) printf(" %s", be->dbbe_name); } printf("\n"); printf("KDB: current backend: %s\n", kdb_dbbe->dbbe_name); } } /* * Handle contexts. */ void * kdb_jmpbuf(jmp_buf new) { void *old; old = kdb_jmpbufp; kdb_jmpbufp = new; return (old); } void kdb_reenter(void) { if (!kdb_active || kdb_jmpbufp == NULL) return; longjmp(kdb_jmpbufp, 1); /* NOTREACHED */ } /* * Thread related support functions. */ struct pcb * kdb_thr_ctx(struct thread *thr) { #if defined(SMP) && defined(KDB_STOPPEDPCB) struct pcpu *pc; #endif if (thr == curthread) return (&kdb_pcb); #if defined(SMP) && defined(KDB_STOPPEDPCB) SLIST_FOREACH(pc, &cpuhead, pc_allcpu) { if (pc->pc_curthread == thr && (stopped_cpus & pc->pc_cpumask)) return (KDB_STOPPEDPCB(pc)); } #endif return (thr->td_pcb); } struct thread * kdb_thr_first(void) { struct proc *p; struct thread *thr; p = LIST_FIRST(&allproc); while (p != NULL) { if (p->p_flag & P_INMEM) { thr = FIRST_THREAD_IN_PROC(p); if (thr != NULL) return (thr); } p = LIST_NEXT(p, p_list); } return (NULL); } struct thread * kdb_thr_from_pid(pid_t pid) { struct proc *p; p = LIST_FIRST(&allproc); while (p != NULL) { if (p->p_flag & P_INMEM && p->p_pid == pid) return (FIRST_THREAD_IN_PROC(p)); p = LIST_NEXT(p, p_list); } return (NULL); } struct thread * kdb_thr_lookup(lwpid_t tid) { struct thread *thr; thr = kdb_thr_first(); while (thr != NULL && thr->td_tid != tid) thr = kdb_thr_next(thr); return (thr); } struct thread * kdb_thr_next(struct thread *thr) { struct proc *p; p = thr->td_proc; thr = TAILQ_NEXT(thr, td_plist); do { if (thr != NULL) return (thr); p = LIST_NEXT(p, p_list); if (p != NULL && (p->p_flag & P_INMEM)) thr = FIRST_THREAD_IN_PROC(p); } while (p != NULL); return (NULL); } int kdb_thr_select(struct thread *thr) { if (thr == NULL) return (EINVAL); kdb_thread = thr; kdb_thrctx = kdb_thr_ctx(thr); return (0); } /* * Enter the debugger due to a trap. */ int kdb_trap(int type, int code, struct trapframe *tf) { register_t intr; #ifdef SMP int did_stop_cpus; #endif int handled; if (kdb_dbbe == NULL || kdb_dbbe->dbbe_trap == NULL) return (0); /* We reenter the debugger through kdb_reenter(). */ if (kdb_active) return (0); intr = intr_disable(); #ifdef SMP if ((did_stop_cpus = kdb_stop_cpus) != 0) stop_cpus_hard(PCPU_GET(other_cpus)); #endif kdb_active++; kdb_frame = tf; /* Let MD code do its thing first... */ kdb_cpu_trap(type, code); makectx(tf, &kdb_pcb); kdb_thr_select(curthread); handled = kdb_dbbe->dbbe_trap(type, code); kdb_active--; #ifdef SMP if (did_stop_cpus) restart_cpus(stopped_cpus); #endif intr_restore(intr); return (handled); }